/** ****************************************************************************** * @file stm32l4xx_hal_rcc_ex.c * @author MCD Application Team * @brief Extended RCC HAL module driver. * This file provides firmware functions to manage the following * functionalities RCC extended peripheral: * + Extended Peripheral Control functions * + Extended Clock management functions * + Extended Clock Recovery System Control functions * ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2017 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32l4xx_hal.h" /** @addtogroup STM32L4xx_HAL_Driver * @{ */ /** @defgroup RCCEx RCCEx * @brief RCC Extended HAL module driver * @{ */ #ifdef HAL_RCC_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private defines -----------------------------------------------------------*/ /** @defgroup RCCEx_Private_Constants RCCEx Private Constants * @{ */ #define PLLSAI1_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ #define PLLSAI2_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ #define PLL_TIMEOUT_VALUE 2U /* 2 ms (minimum Tick + 1) */ #define DIVIDER_P_UPDATE 0U #define DIVIDER_Q_UPDATE 1U #define DIVIDER_R_UPDATE 2U #define __LSCO_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE() #define LSCO_GPIO_PORT GPIOA #define LSCO_PIN GPIO_PIN_2 /** * @} */ /* Private macros ------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /** @defgroup RCCEx_Private_Functions RCCEx Private Functions * @{ */ static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider); #if defined(RCC_PLLSAI2_SUPPORT) static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider); #endif /* RCC_PLLSAI2_SUPPORT */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions * @{ */ /** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions * @brief Extended Peripheral Control functions * @verbatim =============================================================================== ##### Extended Peripheral Control functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to control the RCC Clocks frequencies. [..] (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select the RTC clock source; in this case the Backup domain will be reset in order to modify the RTC Clock source, as consequence RTC registers (including the backup registers) are set to their reset values. @endverbatim * @{ */ /** * @brief Initialize the RCC extended peripherals clocks according to the specified * parameters in the RCC_PeriphCLKInitTypeDef. * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that * contains a field PeriphClockSelection which can be a combination of the following values: * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock @if STM32L462xx * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) @endif @if STM32L486xx * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM1) @endif * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock @if STM32L462xx * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) @endif @if STM32L4S9xx * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) @endif * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock @if STM32L486xx * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) @endif @if STM32L4S9xx * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) @endif * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock @if STM32L443xx * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) @endif @if STM32L486xx * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) @endif * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock @if STM32L462xx * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) @endif @if STM32L486xx * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) @endif @if STM32L4S9xx * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) @endif * * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select * the RTC clock source: in this case the access to Backup domain is enabled. * * @retval HAL status */ HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) { uint32_t tmpregister = 0; uint32_t tickstart = 0U; HAL_StatusTypeDef ret = HAL_OK; /* Intermediate status */ HAL_StatusTypeDef status = HAL_OK; /* Final status */ /* Check the parameters */ assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection)); /*-------------------------- SAI1 clock source configuration ---------------------*/ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1)) { /* Check the parameters */ assert_param(IS_RCC_SAI1CLK(PeriphClkInit->Sai1ClockSelection)); switch(PeriphClkInit->Sai1ClockSelection) { case RCC_SAI1CLKSOURCE_PLL: /* PLL is used as clock source for SAI1*/ /* Enable SAI Clock output generated form System PLL . */ #if defined(RCC_PLLSAI2_SUPPORT) __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); #else __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI2CLK); #endif /* RCC_PLLSAI2_SUPPORT */ /* SAI1 clock source config set later after clock selection check */ break; case RCC_SAI1CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI1*/ /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); /* SAI1 clock source config set later after clock selection check */ break; #if defined(RCC_PLLSAI2_SUPPORT) case RCC_SAI1CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI1*/ /* PLLSAI2 input clock, parameters M, N & P configuration clock output (PLLSAI2ClockOut) */ ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); /* SAI1 clock source config set later after clock selection check */ break; #endif /* RCC_PLLSAI2_SUPPORT */ case RCC_SAI1CLKSOURCE_PIN: /* External clock is used as source of SAI1 clock*/ #if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) case RCC_SAI1CLKSOURCE_HSI: /* HSI is used as source of SAI1 clock*/ #endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ /* SAI1 clock source config set later after clock selection check */ break; default: ret = HAL_ERROR; break; } if(ret == HAL_OK) { /* Set the source of SAI1 clock*/ __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection); } else { /* set overall return value */ status = ret; } } #if defined(SAI2) /*-------------------------- SAI2 clock source configuration ---------------------*/ if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2)) { /* Check the parameters */ assert_param(IS_RCC_SAI2CLK(PeriphClkInit->Sai2ClockSelection)); switch(PeriphClkInit->Sai2ClockSelection) { case RCC_SAI2CLKSOURCE_PLL: /* PLL is used as clock source for SAI2*/ /* Enable SAI Clock output generated form System PLL . */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); /* SAI2 clock source config set later after clock selection check */ break; case RCC_SAI2CLKSOURCE_PLLSAI1: /* PLLSAI1 is used as clock source for SAI2*/ /* PLLSAI1 input clock, parameters M, N & P configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_P_UPDATE); /* SAI2 clock source config set later after clock selection check */ break; case RCC_SAI2CLKSOURCE_PLLSAI2: /* PLLSAI2 is used as clock source for SAI2*/ /* PLLSAI2 input clock, parameters M, N & P configuration and clock output (PLLSAI2ClockOut) */ ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_P_UPDATE); /* SAI2 clock source config set later after clock selection check */ break; case RCC_SAI2CLKSOURCE_PIN: /* External clock is used as source of SAI2 clock*/ #if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) case RCC_SAI2CLKSOURCE_HSI: /* HSI is used as source of SAI2 clock*/ #endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ /* SAI2 clock source config set later after clock selection check */ break; default: ret = HAL_ERROR; break; } if(ret == HAL_OK) { /* Set the source of SAI2 clock*/ __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection); } else { /* set overall return value */ status = ret; } } #endif /* SAI2 */ /*-------------------------- RTC clock source configuration ----------------------*/ if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_RTC) == RCC_PERIPHCLK_RTC) { FlagStatus pwrclkchanged = RESET; /* Check for RTC Parameters used to output RTCCLK */ assert_param(IS_RCC_RTCCLKSOURCE(PeriphClkInit->RTCClockSelection)); /* Enable Power Clock */ if(__HAL_RCC_PWR_IS_CLK_DISABLED()) { __HAL_RCC_PWR_CLK_ENABLE(); pwrclkchanged = SET; } /* Enable write access to Backup domain */ SET_BIT(PWR->CR1, PWR_CR1_DBP); /* Wait for Backup domain Write protection disable */ tickstart = HAL_GetTick(); while(READ_BIT(PWR->CR1, PWR_CR1_DBP) == RESET) { if((HAL_GetTick() - tickstart) > RCC_DBP_TIMEOUT_VALUE) { ret = HAL_TIMEOUT; break; } } if(ret == HAL_OK) { /* Reset the Backup domain only if the RTC Clock source selection is modified from default */ tmpregister = READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL); if((tmpregister != RCC_RTCCLKSOURCE_NONE) && (tmpregister != PeriphClkInit->RTCClockSelection)) { /* Store the content of BDCR register before the reset of Backup Domain */ tmpregister = READ_BIT(RCC->BDCR, ~(RCC_BDCR_RTCSEL)); /* RTC Clock selection can be changed only if the Backup Domain is reset */ __HAL_RCC_BACKUPRESET_FORCE(); __HAL_RCC_BACKUPRESET_RELEASE(); /* Restore the Content of BDCR register */ RCC->BDCR = tmpregister; } /* Wait for LSE reactivation if LSE was enable prior to Backup Domain reset */ if (HAL_IS_BIT_SET(tmpregister, RCC_BDCR_LSEON)) { /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till LSE is ready */ while(READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == RESET) { if((HAL_GetTick() - tickstart) > RCC_LSE_TIMEOUT_VALUE) { ret = HAL_TIMEOUT; break; } } } if(ret == HAL_OK) { /* Apply new RTC clock source selection */ __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection); } else { /* set overall return value */ status = ret; } } else { /* set overall return value */ status = ret; } /* Restore clock configuration if changed */ if(pwrclkchanged == SET) { __HAL_RCC_PWR_CLK_DISABLE(); } } /*-------------------------- USART1 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART1) == RCC_PERIPHCLK_USART1) { /* Check the parameters */ assert_param(IS_RCC_USART1CLKSOURCE(PeriphClkInit->Usart1ClockSelection)); /* Configure the USART1 clock source */ __HAL_RCC_USART1_CONFIG(PeriphClkInit->Usart1ClockSelection); } /*-------------------------- USART2 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART2) == RCC_PERIPHCLK_USART2) { /* Check the parameters */ assert_param(IS_RCC_USART2CLKSOURCE(PeriphClkInit->Usart2ClockSelection)); /* Configure the USART2 clock source */ __HAL_RCC_USART2_CONFIG(PeriphClkInit->Usart2ClockSelection); } #if defined(USART3) /*-------------------------- USART3 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USART3) == RCC_PERIPHCLK_USART3) { /* Check the parameters */ assert_param(IS_RCC_USART3CLKSOURCE(PeriphClkInit->Usart3ClockSelection)); /* Configure the USART3 clock source */ __HAL_RCC_USART3_CONFIG(PeriphClkInit->Usart3ClockSelection); } #endif /* USART3 */ #if defined(UART4) /*-------------------------- UART4 clock source configuration --------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART4) == RCC_PERIPHCLK_UART4) { /* Check the parameters */ assert_param(IS_RCC_UART4CLKSOURCE(PeriphClkInit->Uart4ClockSelection)); /* Configure the UART4 clock source */ __HAL_RCC_UART4_CONFIG(PeriphClkInit->Uart4ClockSelection); } #endif /* UART4 */ #if defined(UART5) /*-------------------------- UART5 clock source configuration --------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_UART5) == RCC_PERIPHCLK_UART5) { /* Check the parameters */ assert_param(IS_RCC_UART5CLKSOURCE(PeriphClkInit->Uart5ClockSelection)); /* Configure the UART5 clock source */ __HAL_RCC_UART5_CONFIG(PeriphClkInit->Uart5ClockSelection); } #endif /* UART5 */ /*-------------------------- LPUART1 clock source configuration ------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPUART1) == RCC_PERIPHCLK_LPUART1) { /* Check the parameters */ assert_param(IS_RCC_LPUART1CLKSOURCE(PeriphClkInit->Lpuart1ClockSelection)); /* Configure the LPUAR1 clock source */ __HAL_RCC_LPUART1_CONFIG(PeriphClkInit->Lpuart1ClockSelection); } /*-------------------------- LPTIM1 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM1) == (RCC_PERIPHCLK_LPTIM1)) { assert_param(IS_RCC_LPTIM1CLK(PeriphClkInit->Lptim1ClockSelection)); __HAL_RCC_LPTIM1_CONFIG(PeriphClkInit->Lptim1ClockSelection); } /*-------------------------- LPTIM2 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LPTIM2) == (RCC_PERIPHCLK_LPTIM2)) { assert_param(IS_RCC_LPTIM2CLK(PeriphClkInit->Lptim2ClockSelection)); __HAL_RCC_LPTIM2_CONFIG(PeriphClkInit->Lptim2ClockSelection); } /*-------------------------- I2C1 clock source configuration ---------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C1) == RCC_PERIPHCLK_I2C1) { /* Check the parameters */ assert_param(IS_RCC_I2C1CLKSOURCE(PeriphClkInit->I2c1ClockSelection)); /* Configure the I2C1 clock source */ __HAL_RCC_I2C1_CONFIG(PeriphClkInit->I2c1ClockSelection); } #if defined(I2C2) /*-------------------------- I2C2 clock source configuration ---------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C2) == RCC_PERIPHCLK_I2C2) { /* Check the parameters */ assert_param(IS_RCC_I2C2CLKSOURCE(PeriphClkInit->I2c2ClockSelection)); /* Configure the I2C2 clock source */ __HAL_RCC_I2C2_CONFIG(PeriphClkInit->I2c2ClockSelection); } #endif /* I2C2 */ /*-------------------------- I2C3 clock source configuration ---------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C3) == RCC_PERIPHCLK_I2C3) { /* Check the parameters */ assert_param(IS_RCC_I2C3CLKSOURCE(PeriphClkInit->I2c3ClockSelection)); /* Configure the I2C3 clock source */ __HAL_RCC_I2C3_CONFIG(PeriphClkInit->I2c3ClockSelection); } #if defined(I2C4) /*-------------------------- I2C4 clock source configuration ---------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2C4) == RCC_PERIPHCLK_I2C4) { /* Check the parameters */ assert_param(IS_RCC_I2C4CLKSOURCE(PeriphClkInit->I2c4ClockSelection)); /* Configure the I2C4 clock source */ __HAL_RCC_I2C4_CONFIG(PeriphClkInit->I2c4ClockSelection); } #endif /* I2C4 */ #if defined(USB_OTG_FS) || defined(USB) /*-------------------------- USB clock source configuration ----------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_USB) == (RCC_PERIPHCLK_USB)) { assert_param(IS_RCC_USBCLKSOURCE(PeriphClkInit->UsbClockSelection)); __HAL_RCC_USB_CONFIG(PeriphClkInit->UsbClockSelection); if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLL) { /* Enable PLL48M1CLK output */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); } else { if(PeriphClkInit->UsbClockSelection == RCC_USBCLKSOURCE_PLLSAI1) { /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); if(ret != HAL_OK) { /* set overall return value */ status = ret; } } } } #endif /* USB_OTG_FS || USB */ #if defined(SDMMC1) /*-------------------------- SDMMC1 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDMMC1) == (RCC_PERIPHCLK_SDMMC1)) { assert_param(IS_RCC_SDMMC1CLKSOURCE(PeriphClkInit->Sdmmc1ClockSelection)); __HAL_RCC_SDMMC1_CONFIG(PeriphClkInit->Sdmmc1ClockSelection); if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLL) /* PLL "Q" ? */ { /* Enable PLL48M1CLK output */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); } #if defined(RCC_CCIPR2_SDMMCSEL) else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLP) /* PLL "P" ? */ { /* Enable PLLSAI3CLK output */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_SAI3CLK); } #endif else if(PeriphClkInit->Sdmmc1ClockSelection == RCC_SDMMC1CLKSOURCE_PLLSAI1) { /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); if(ret != HAL_OK) { /* set overall return value */ status = ret; } } } #endif /* SDMMC1 */ /*-------------------------- RNG clock source configuration ----------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RNG) == (RCC_PERIPHCLK_RNG)) { assert_param(IS_RCC_RNGCLKSOURCE(PeriphClkInit->RngClockSelection)); __HAL_RCC_RNG_CONFIG(PeriphClkInit->RngClockSelection); if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLL) { /* Enable PLL48M1CLK output */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); } else if(PeriphClkInit->RngClockSelection == RCC_RNGCLKSOURCE_PLLSAI1) { /* PLLSAI1 input clock, parameters M, N & Q configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_Q_UPDATE); if(ret != HAL_OK) { /* set overall return value */ status = ret; } } } /*-------------------------- ADC clock source configuration ----------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_ADC) == RCC_PERIPHCLK_ADC) { /* Check the parameters */ assert_param(IS_RCC_ADCCLKSOURCE(PeriphClkInit->AdcClockSelection)); /* Configure the ADC interface clock source */ __HAL_RCC_ADC_CONFIG(PeriphClkInit->AdcClockSelection); if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI1) { /* PLLSAI1 input clock, parameters M, N & R configuration and clock output (PLLSAI1ClockOut) */ ret = RCCEx_PLLSAI1_Config(&(PeriphClkInit->PLLSAI1), DIVIDER_R_UPDATE); if(ret != HAL_OK) { /* set overall return value */ status = ret; } } #if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) else if(PeriphClkInit->AdcClockSelection == RCC_ADCCLKSOURCE_PLLSAI2) { /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); if(ret != HAL_OK) { /* set overall return value */ status = ret; } } #endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ } #if defined(SWPMI1) /*-------------------------- SWPMI1 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SWPMI1) == RCC_PERIPHCLK_SWPMI1) { /* Check the parameters */ assert_param(IS_RCC_SWPMI1CLKSOURCE(PeriphClkInit->Swpmi1ClockSelection)); /* Configure the SWPMI1 clock source */ __HAL_RCC_SWPMI1_CONFIG(PeriphClkInit->Swpmi1ClockSelection); } #endif /* SWPMI1 */ #if defined(DFSDM1_Filter0) /*-------------------------- DFSDM1 clock source configuration -------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1) == RCC_PERIPHCLK_DFSDM1) { /* Check the parameters */ assert_param(IS_RCC_DFSDM1CLKSOURCE(PeriphClkInit->Dfsdm1ClockSelection)); /* Configure the DFSDM1 interface clock source */ __HAL_RCC_DFSDM1_CONFIG(PeriphClkInit->Dfsdm1ClockSelection); } #if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) /*-------------------------- DFSDM1 audio clock source configuration -------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DFSDM1AUDIO) == RCC_PERIPHCLK_DFSDM1AUDIO) { /* Check the parameters */ assert_param(IS_RCC_DFSDM1AUDIOCLKSOURCE(PeriphClkInit->Dfsdm1AudioClockSelection)); /* Configure the DFSDM1 interface audio clock source */ __HAL_RCC_DFSDM1AUDIO_CONFIG(PeriphClkInit->Dfsdm1AudioClockSelection); } #endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ #endif /* DFSDM1_Filter0 */ #if defined(LTDC) /*-------------------------- LTDC clock source configuration --------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC) { /* Check the parameters */ assert_param(IS_RCC_LTDCCLKSOURCE(PeriphClkInit->LtdcClockSelection)); /* Disable the PLLSAI2 */ __HAL_RCC_PLLSAI2_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI2 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) { ret = HAL_TIMEOUT; break; } } if(ret == HAL_OK) { /* Configure the LTDC clock source */ __HAL_RCC_LTDC_CONFIG(PeriphClkInit->LtdcClockSelection); /* PLLSAI2 input clock, parameters M, N & R configuration and clock output (PLLSAI2ClockOut) */ ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_R_UPDATE); } if(ret != HAL_OK) { /* set overall return value */ status = ret; } } #endif /* LTDC */ #if defined(DSI) /*-------------------------- DSI clock source configuration ---------------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_DSI) == RCC_PERIPHCLK_DSI) { /* Check the parameters */ assert_param(IS_RCC_DSICLKSOURCE(PeriphClkInit->DsiClockSelection)); /* Configure the DSI clock source */ __HAL_RCC_DSI_CONFIG(PeriphClkInit->DsiClockSelection); if(PeriphClkInit->DsiClockSelection == RCC_DSICLKSOURCE_PLLSAI2) { /* PLLSAI2 input clock, parameters M, N & Q configuration and clock output (PLLSAI2ClockOut) */ ret = RCCEx_PLLSAI2_Config(&(PeriphClkInit->PLLSAI2), DIVIDER_Q_UPDATE); if(ret != HAL_OK) { /* set overall return value */ status = ret; } } } #endif /* DSI */ #if defined(OCTOSPI1) || defined(OCTOSPI2) /*-------------------------- OctoSPIx clock source configuration ----------------*/ if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_OSPI) == RCC_PERIPHCLK_OSPI) { /* Check the parameters */ assert_param(IS_RCC_OSPICLKSOURCE(PeriphClkInit->OspiClockSelection)); /* Configure the OctoSPI clock source */ __HAL_RCC_OSPI_CONFIG(PeriphClkInit->OspiClockSelection); if(PeriphClkInit->OspiClockSelection == RCC_OSPICLKSOURCE_PLL) { /* Enable PLL48M1CLK output */ __HAL_RCC_PLLCLKOUT_ENABLE(RCC_PLL_48M1CLK); } } #endif /* OCTOSPI1 || OCTOSPI2 */ return status; } /** * @brief Get the RCC_ClkInitStruct according to the internal RCC configuration registers. * @param PeriphClkInit pointer to an RCC_PeriphCLKInitTypeDef structure that * returns the configuration information for the Extended Peripherals * clocks(SAI1, SAI2, LPTIM1, LPTIM2, I2C1, I2C2, I2C3, I2C4, LPUART, * USART1, USART2, USART3, UART4, UART5, RTC, ADCx, DFSDMx, SWPMI1, USB, SDMMC1 and RNG). * @retval None */ void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit) { /* Set all possible values for the extended clock type parameter------------*/ #if defined(STM32L431xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L432xx) || defined(STM32L442xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C3 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L433xx) || defined(STM32L443xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L451xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L452xx) || defined(STM32L462xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L471xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L496xx) || defined(STM32L4A6xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_SWPMI1 | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_RTC ; #elif defined(STM32L4R5xx) || defined(STM32L4S5xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI; #elif defined(STM32L4R7xx) || defined(STM32L4S7xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC; #elif defined(STM32L4R9xx) || defined(STM32L4S9xx) PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2 | RCC_PERIPHCLK_USART3 | RCC_PERIPHCLK_UART4 | RCC_PERIPHCLK_UART5 | \ RCC_PERIPHCLK_LPUART1 | RCC_PERIPHCLK_I2C1 | RCC_PERIPHCLK_I2C2 | RCC_PERIPHCLK_I2C3 | RCC_PERIPHCLK_I2C4 | \ RCC_PERIPHCLK_LPTIM1 | RCC_PERIPHCLK_LPTIM2 | RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 | RCC_PERIPHCLK_USB | \ RCC_PERIPHCLK_SDMMC1 | RCC_PERIPHCLK_RNG | RCC_PERIPHCLK_ADC | RCC_PERIPHCLK_DFSDM1 | \ RCC_PERIPHCLK_DFSDM1AUDIO | RCC_PERIPHCLK_RTC | RCC_PERIPHCLK_OSPI | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_DSI; #endif /* STM32L431xx */ /* Get the PLLSAI1 Clock configuration -----------------------------------------------*/ PeriphClkInit->PLLSAI1.PLLSAI1Source = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC) >> RCC_PLLCFGR_PLLSRC_Pos; #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U; #else PeriphClkInit->PLLSAI1.PLLSAI1M = (READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U; #endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ PeriphClkInit->PLLSAI1.PLLSAI1N = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; PeriphClkInit->PLLSAI1.PLLSAI1P = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) >> RCC_PLLSAI1CFGR_PLLSAI1P_Pos) << 4U) + 7U; PeriphClkInit->PLLSAI1.PLLSAI1Q = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) * 2U; PeriphClkInit->PLLSAI1.PLLSAI1R = ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) * 2U; #if defined(RCC_PLLSAI2_SUPPORT) /* Get the PLLSAI2 Clock configuration -----------------------------------------------*/ PeriphClkInit->PLLSAI2.PLLSAI2Source = PeriphClkInit->PLLSAI1.PLLSAI1Source; #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) PeriphClkInit->PLLSAI2.PLLSAI2M = (READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U; #else PeriphClkInit->PLLSAI2.PLLSAI2M = PeriphClkInit->PLLSAI1.PLLSAI1M; #endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ PeriphClkInit->PLLSAI2.PLLSAI2N = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; PeriphClkInit->PLLSAI2.PLLSAI2P = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) >> RCC_PLLSAI2CFGR_PLLSAI2P_Pos) << 4U) + 7U; #if defined(RCC_PLLSAI2Q_DIV_SUPPORT) PeriphClkInit->PLLSAI2.PLLSAI2Q = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) * 2U; #endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ PeriphClkInit->PLLSAI2.PLLSAI2R = ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R)>> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) * 2U; #endif /* RCC_PLLSAI2_SUPPORT */ /* Get the USART1 clock source ---------------------------------------------*/ PeriphClkInit->Usart1ClockSelection = __HAL_RCC_GET_USART1_SOURCE(); /* Get the USART2 clock source ---------------------------------------------*/ PeriphClkInit->Usart2ClockSelection = __HAL_RCC_GET_USART2_SOURCE(); #if defined(USART3) /* Get the USART3 clock source ---------------------------------------------*/ PeriphClkInit->Usart3ClockSelection = __HAL_RCC_GET_USART3_SOURCE(); #endif /* USART3 */ #if defined(UART4) /* Get the UART4 clock source ----------------------------------------------*/ PeriphClkInit->Uart4ClockSelection = __HAL_RCC_GET_UART4_SOURCE(); #endif /* UART4 */ #if defined(UART5) /* Get the UART5 clock source ----------------------------------------------*/ PeriphClkInit->Uart5ClockSelection = __HAL_RCC_GET_UART5_SOURCE(); #endif /* UART5 */ /* Get the LPUART1 clock source --------------------------------------------*/ PeriphClkInit->Lpuart1ClockSelection = __HAL_RCC_GET_LPUART1_SOURCE(); /* Get the I2C1 clock source -----------------------------------------------*/ PeriphClkInit->I2c1ClockSelection = __HAL_RCC_GET_I2C1_SOURCE(); #if defined(I2C2) /* Get the I2C2 clock source ----------------------------------------------*/ PeriphClkInit->I2c2ClockSelection = __HAL_RCC_GET_I2C2_SOURCE(); #endif /* I2C2 */ /* Get the I2C3 clock source -----------------------------------------------*/ PeriphClkInit->I2c3ClockSelection = __HAL_RCC_GET_I2C3_SOURCE(); #if defined(I2C4) /* Get the I2C4 clock source -----------------------------------------------*/ PeriphClkInit->I2c4ClockSelection = __HAL_RCC_GET_I2C4_SOURCE(); #endif /* I2C4 */ /* Get the LPTIM1 clock source ---------------------------------------------*/ PeriphClkInit->Lptim1ClockSelection = __HAL_RCC_GET_LPTIM1_SOURCE(); /* Get the LPTIM2 clock source ---------------------------------------------*/ PeriphClkInit->Lptim2ClockSelection = __HAL_RCC_GET_LPTIM2_SOURCE(); /* Get the SAI1 clock source -----------------------------------------------*/ PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE(); #if defined(SAI2) /* Get the SAI2 clock source -----------------------------------------------*/ PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE(); #endif /* SAI2 */ /* Get the RTC clock source ------------------------------------------------*/ PeriphClkInit->RTCClockSelection = __HAL_RCC_GET_RTC_SOURCE(); #if defined(USB_OTG_FS) || defined(USB) /* Get the USB clock source ------------------------------------------------*/ PeriphClkInit->UsbClockSelection = __HAL_RCC_GET_USB_SOURCE(); #endif /* USB_OTG_FS || USB */ #if defined(SDMMC1) /* Get the SDMMC1 clock source ---------------------------------------------*/ PeriphClkInit->Sdmmc1ClockSelection = __HAL_RCC_GET_SDMMC1_SOURCE(); #endif /* SDMMC1 */ /* Get the RNG clock source ------------------------------------------------*/ PeriphClkInit->RngClockSelection = __HAL_RCC_GET_RNG_SOURCE(); /* Get the ADC clock source ------------------------------------------------*/ PeriphClkInit->AdcClockSelection = __HAL_RCC_GET_ADC_SOURCE(); #if defined(SWPMI1) /* Get the SWPMI1 clock source ---------------------------------------------*/ PeriphClkInit->Swpmi1ClockSelection = __HAL_RCC_GET_SWPMI1_SOURCE(); #endif /* SWPMI1 */ #if defined(DFSDM1_Filter0) /* Get the DFSDM1 clock source ---------------------------------------------*/ PeriphClkInit->Dfsdm1ClockSelection = __HAL_RCC_GET_DFSDM1_SOURCE(); #if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) /* Get the DFSDM1 audio clock source ---------------------------------------*/ PeriphClkInit->Dfsdm1AudioClockSelection = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); #endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ #endif /* DFSDM1_Filter0 */ #if defined(LTDC) /* Get the LTDC clock source -----------------------------------------------*/ PeriphClkInit->LtdcClockSelection = __HAL_RCC_GET_LTDC_SOURCE(); #endif /* LTDC */ #if defined(DSI) /* Get the DSI clock source ------------------------------------------------*/ PeriphClkInit->DsiClockSelection = __HAL_RCC_GET_DSI_SOURCE(); #endif /* DSI */ #if defined(OCTOSPI1) || defined(OCTOSPI2) /* Get the OctoSPIclock source --------------------------------------------*/ PeriphClkInit->OspiClockSelection = __HAL_RCC_GET_OSPI_SOURCE(); #endif /* OCTOSPI1 || OCTOSPI2 */ } /** * @brief Return the peripheral clock frequency for peripherals with clock source from PLLSAIs * @note Return 0 if peripheral clock identifier not managed by this API * @param PeriphClk Peripheral clock identifier * This parameter can be one of the following values: * @arg @ref RCC_PERIPHCLK_RTC RTC peripheral clock * @arg @ref RCC_PERIPHCLK_ADC ADC peripheral clock @if STM32L462xx * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) @endif @if STM32L486xx * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral clock (only for devices with DFSDM) @endif * @arg @ref RCC_PERIPHCLK_I2C1 I2C1 peripheral clock * @arg @ref RCC_PERIPHCLK_I2C2 I2C2 peripheral clock * @arg @ref RCC_PERIPHCLK_I2C3 I2C3 peripheral clock @if STM32L462xx * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) @endif @if STM32L4S9xx * @arg @ref RCC_PERIPHCLK_I2C4 I2C4 peripheral clock (only for devices with I2C4) @endif * @arg @ref RCC_PERIPHCLK_LPTIM1 LPTIM1 peripheral clock * @arg @ref RCC_PERIPHCLK_LPTIM2 LPTIM2 peripheral clock * @arg @ref RCC_PERIPHCLK_LPUART1 LPUART1 peripheral clock * @arg @ref RCC_PERIPHCLK_RNG RNG peripheral clock * @arg @ref RCC_PERIPHCLK_SAI1 SAI1 peripheral clock @if STM32L486xx * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) @endif @if STM32L4S9xx * @arg @ref RCC_PERIPHCLK_SAI2 SAI2 peripheral clock (only for devices with SAI2) @endif * @arg @ref RCC_PERIPHCLK_SDMMC1 SDMMC1 peripheral clock @if STM32L443xx * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) @endif @if STM32L486xx * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_SWPMI1 SWPMI1 peripheral clock (only for devices with SWPMI1) @endif * @arg @ref RCC_PERIPHCLK_USART1 USART1 peripheral clock * @arg @ref RCC_PERIPHCLK_USART2 USART1 peripheral clock * @arg @ref RCC_PERIPHCLK_USART3 USART1 peripheral clock @if STM32L462xx * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) @endif @if STM32L486xx * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) @endif @if STM32L4A6xx * @arg @ref RCC_PERIPHCLK_UART4 UART4 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_UART5 UART5 peripheral clock (only for devices with UART5) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) @endif @if STM32L4S9xx * @arg @ref RCC_PERIPHCLK_UART4 USART1 peripheral clock (only for devices with UART4) * @arg @ref RCC_PERIPHCLK_UART5 USART1 peripheral clock (only for devices with UART5) * @arg @ref RCC_PERIPHCLK_USB USB peripheral clock (only for devices with USB) * @arg @ref RCC_PERIPHCLK_DFSDM1 DFSDM1 peripheral kernel clock (only for devices with DFSDM1) * @arg @ref RCC_PERIPHCLK_DFSDM1AUDIO DFSDM1 peripheral audio clock (only for devices with DFSDM1) * @arg @ref RCC_PERIPHCLK_LTDC LTDC peripheral clock (only for devices with LTDC) * @arg @ref RCC_PERIPHCLK_DSI DSI peripheral clock (only for devices with DSI) * @arg @ref RCC_PERIPHCLK_OSPI OctoSPI peripheral clock (only for devices with OctoSPI) @endif * @retval Frequency in Hz */ uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk) { uint32_t frequency = 0U; uint32_t srcclk = 0U; uint32_t pllvco = 0U, plln = 0U, pllp = 0U; /* Check the parameters */ assert_param(IS_RCC_PERIPHCLOCK(PeriphClk)); if(PeriphClk == RCC_PERIPHCLK_RTC) { /* Get the current RTC source */ srcclk = __HAL_RCC_GET_RTC_SOURCE(); /* Check if LSE is ready and if RTC clock selection is LSE */ if ((srcclk == RCC_RTCCLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Check if LSI is ready and if RTC clock selection is LSI */ else if ((srcclk == RCC_RTCCLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) { frequency = LSI_VALUE; } /* Check if HSE is ready and if RTC clock selection is HSI_DIV32*/ else if ((srcclk == RCC_RTCCLKSOURCE_HSE_DIV32) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY))) { frequency = HSE_VALUE / 32U; } /* Clock not enabled for RTC*/ else { frequency = 0U; } } else { /* Other external peripheral clock source than RTC */ /* Compute PLL clock input */ if(__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_MSI) /* MSI ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) { /*MSI frequency range in HZ*/ pllvco = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; } else { pllvco = 0U; } } else if(__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSI) /* HSI ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) { pllvco = HSI_VALUE; } else { pllvco = 0U; } } else if(__HAL_RCC_GET_PLL_OSCSOURCE() == RCC_PLLSOURCE_HSE) /* HSE ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSERDY)) { pllvco = HSE_VALUE; } else { pllvco = 0U; } } else /* No source */ { pllvco = 0U; } #if !defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && !defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* f(PLL Source) / PLLM */ pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); #endif switch(PeriphClk) { #if defined(SAI2) case RCC_PERIPHCLK_SAI1: case RCC_PERIPHCLK_SAI2: if(PeriphClk == RCC_PERIPHCLK_SAI1) { srcclk = __HAL_RCC_GET_SAI1_SOURCE(); if(srcclk == RCC_SAI1CLKSOURCE_PIN) { frequency = EXTERNAL_SAI1_CLOCK_VALUE; } /* Else, PLL clock output to check below */ } else /* RCC_PERIPHCLK_SAI2 */ { srcclk = __HAL_RCC_GET_SAI2_SOURCE(); if(srcclk == RCC_SAI2CLKSOURCE_PIN) { frequency = EXTERNAL_SAI2_CLOCK_VALUE; } /* Else, PLL clock output to check below */ } #else case RCC_PERIPHCLK_SAI1: if(PeriphClk == RCC_PERIPHCLK_SAI1) { srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_SAI1SEL); if(srcclk == RCC_SAI1CLKSOURCE_PIN) { frequency = EXTERNAL_SAI1_CLOCK_VALUE; } /* Else, PLL clock output to check below */ } #endif /* SAI2 */ if(frequency == 0U) { #if defined(SAI2) if((srcclk == RCC_SAI1CLKSOURCE_PLL) || (srcclk == RCC_SAI2CLKSOURCE_PLL)) { if(__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI3CLK) != RESET) { /* f(PLLSAI3CLK) = f(VCO input) * PLLN / PLLP */ plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; #if defined(RCC_PLLP_DIV_2_31_SUPPORT) pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; #endif if(pllp == 0U) { if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != RESET) { pllp = 17U; } else { pllp = 7U; } } frequency = (pllvco * plln) / pllp; } } else if(srcclk == 0U) /* RCC_SAI1CLKSOURCE_PLLSAI1 || RCC_SAI2CLKSOURCE_PLLSAI1 */ { if(__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != RESET) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* f(PLLSAI1 Source) / PLLSAI1M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); #endif /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; #if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; #endif if(pllp == 0U) { if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != RESET) { pllp = 17U; } else { pllp = 7U; } } frequency = (pllvco * plln) / pllp; } } #if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) else if((srcclk == RCC_SAI1CLKSOURCE_HSI) || (srcclk == RCC_SAI2CLKSOURCE_HSI)) { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) { frequency = HSI_VALUE; } } #endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ #else if(srcclk == RCC_SAI1CLKSOURCE_PLL) { if(__HAL_RCC_GET_PLLCLKOUT_CONFIG(RCC_PLL_SAI2CLK) != RESET) { /* f(PLLSAI2CLK) = f(VCO input) * PLLN / PLLP */ plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; #if defined(RCC_PLLP_DIV_2_31_SUPPORT) pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; #endif if(pllp == 0U) { if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != RESET) { pllp = 17U; } else { pllp = 7U; } } frequency = (pllvco * plln) / pllp; } else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) { /* HSI automatically selected as clock source if PLLs not enabled */ frequency = HSI_VALUE; } else { /* No clock source */ frequency = 0U; } } else if(srcclk == RCC_SAI1CLKSOURCE_PLLSAI1) { if(__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_SAI1CLK) != RESET) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* f(PLLSAI1 Source) / PLLSAI1M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); #endif /* f(PLLSAI1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1P */ plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; #if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) pllp = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos; #endif if(pllp == 0U) { if(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P) != RESET) { pllp = 17U; } else { pllp = 7U; } } frequency = (pllvco * plln) / pllp; } else if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY)) { /* HSI automatically selected as clock source if PLLs not enabled */ frequency = HSI_VALUE; } else { /* No clock source */ frequency = 0U; } } #endif /* SAI2 */ #if defined(RCC_PLLSAI2_SUPPORT) else if((srcclk == RCC_SAI1CLKSOURCE_PLLSAI2) || (srcclk == RCC_SAI2CLKSOURCE_PLLSAI2)) { if(__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_SAI2CLK) != RESET) { #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* f(PLLSAI2 Source) / PLLSAI2M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); #endif /* f(PLLSAI2CLK) = f(VCOSAI2 input) * PLLSAI2N / PLLSAI2P */ plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; #if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) pllp = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos; #endif if(pllp == 0U) { if(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P) != RESET) { pllp = 17U; } else { pllp = 7U; } } frequency = (pllvco * plln) / pllp; } } #endif /* RCC_PLLSAI2_SUPPORT */ else { /* No clock source */ frequency = 0U; } } break; #if defined(USB_OTG_FS) || defined(USB) case RCC_PERIPHCLK_USB: #endif /* USB_OTG_FS || USB */ case RCC_PERIPHCLK_RNG: #if defined(SDMMC1) && !defined(RCC_CCIPR2_SDMMCSEL) case RCC_PERIPHCLK_SDMMC1: #endif /* SDMMC1 && !RCC_CCIPR2_SDMMCSEL */ srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); if(srcclk == RCC_CCIPR_CLK48SEL) /* MSI ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) { /*MSI frequency range in HZ*/ frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; } else { frequency = 0U; } } else if(srcclk == RCC_CCIPR_CLK48SEL_1) /* PLL ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) || defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* f(PLL Source) / PLLM */ pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); #endif /* f(PLL48M1CLK) = f(VCO input) * PLLN / PLLQ */ plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U); } else { frequency = 0U; } } else if(srcclk == RCC_CCIPR_CLK48SEL_0) /* PLLSAI1 ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* f(PLLSAI1 Source) / PLLSAI1M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); #endif /* f(PLL48M2CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1Q */ plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U); } else { frequency = 0U; } } #if defined(RCC_HSI48_SUPPORT) else if((srcclk == 0U) && (HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY))) /* HSI48 ? */ { frequency = HSI48_VALUE; } else /* No clock source */ { frequency = 0U; } #else else /* No clock source */ { frequency = 0U; } #endif /* RCC_HSI48_SUPPORT */ break; #if defined(SDMMC1) && defined(RCC_CCIPR2_SDMMCSEL) case RCC_PERIPHCLK_SDMMC1: if(HAL_IS_BIT_SET(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL)) /* PLL "P" ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN)) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) || defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* f(PLL Source) / PLLM */ pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); #endif /* f(PLLSAI3CLK) = f(VCO input) * PLLN / PLLP */ plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; #if defined(RCC_PLLP_DIV_2_31_SUPPORT) pllp = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV) >> RCC_PLLCFGR_PLLPDIV_Pos; #endif if(pllp == 0U) { if(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP) != RESET) { pllp = 17U; } else { pllp = 7U; } } frequency = (pllvco * plln) / pllp; } else { frequency = 0U; } } else /* 48MHz from PLL "Q" or MSI or PLLSAI1Q or HSI48 */ { srcclk = READ_BIT(RCC->CCIPR, RCC_CCIPR_CLK48SEL); if(srcclk == RCC_CCIPR_CLK48SEL) /* MSI ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY)) { /*MSI frequency range in HZ*/ frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; } else { frequency = 0U; } } else if(srcclk == RCC_CCIPR_CLK48SEL_1) /* PLL "Q" ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) || defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* f(PLL Source) / PLLM */ pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); #endif /* f(PLL48M1CLK) = f(VCO input) * PLLN / PLLQ */ plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U); } else { frequency = 0U; } } else if(srcclk == RCC_CCIPR_CLK48SEL_0) /* PLLSAI1 ? */ { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLSAI1RDY) && HAL_IS_BIT_SET(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN)) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* f(PLLSAI1 Source) / PLLSAI1M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); #endif /* f(PLL48M2CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1Q */ plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U); } else { frequency = 0U; } } else if((srcclk == 0U) && (HAL_IS_BIT_SET(RCC->CRRCR, RCC_CRRCR_HSI48RDY))) /* HSI48 ? */ { frequency = HSI48_VALUE; } else /* No clock source */ { frequency = 0U; } } break; #endif /* SDMMC1 && RCC_CCIPR2_SDMMCSEL */ case RCC_PERIPHCLK_USART1: /* Get the current USART1 source */ srcclk = __HAL_RCC_GET_USART1_SOURCE(); if(srcclk == RCC_USART1CLKSOURCE_PCLK2) { frequency = HAL_RCC_GetPCLK2Freq(); } else if(srcclk == RCC_USART1CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_USART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if((srcclk == RCC_USART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for USART1 */ else { frequency = 0U; } break; case RCC_PERIPHCLK_USART2: /* Get the current USART2 source */ srcclk = __HAL_RCC_GET_USART2_SOURCE(); if(srcclk == RCC_USART2CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_USART2CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_USART2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if((srcclk == RCC_USART2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for USART2 */ else { frequency = 0U; } break; #if defined(USART3) case RCC_PERIPHCLK_USART3: /* Get the current USART3 source */ srcclk = __HAL_RCC_GET_USART3_SOURCE(); if(srcclk == RCC_USART3CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_USART3CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_USART3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if((srcclk == RCC_USART3CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for USART3 */ else { frequency = 0U; } break; #endif /* USART3 */ #if defined(UART4) case RCC_PERIPHCLK_UART4: /* Get the current UART4 source */ srcclk = __HAL_RCC_GET_UART4_SOURCE(); if(srcclk == RCC_UART4CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_UART4CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_UART4CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if((srcclk == RCC_UART4CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for UART4 */ else { frequency = 0U; } break; #endif /* UART4 */ #if defined(UART5) case RCC_PERIPHCLK_UART5: /* Get the current UART5 source */ srcclk = __HAL_RCC_GET_UART5_SOURCE(); if(srcclk == RCC_UART5CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_UART5CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_UART5CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if((srcclk == RCC_UART5CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for UART5 */ else { frequency = 0U; } break; #endif /* UART5 */ case RCC_PERIPHCLK_LPUART1: /* Get the current LPUART1 source */ srcclk = __HAL_RCC_GET_LPUART1_SOURCE(); if(srcclk == RCC_LPUART1CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_LPUART1CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_LPUART1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if((srcclk == RCC_LPUART1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for LPUART1 */ else { frequency = 0U; } break; case RCC_PERIPHCLK_ADC: srcclk = __HAL_RCC_GET_ADC_SOURCE(); if(srcclk == RCC_ADCCLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if(srcclk == RCC_ADCCLKSOURCE_PLLSAI1) { if(__HAL_RCC_GET_PLLSAI1CLKOUT_CONFIG(RCC_PLLSAI1_ADC1CLK) != RESET) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* f(PLLSAI1 Source) / PLLSAI1M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)); #endif /* f(PLLADC1CLK) = f(VCOSAI1 input) * PLLSAI1N / PLLSAI1R */ plln = READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U); } } #if defined(STM32L471xx) || defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || defined(STM32L496xx) || defined(STM32L4A6xx) else if(srcclk == RCC_ADCCLKSOURCE_PLLSAI2) { if(__HAL_RCC_GET_PLLSAI2CLKOUT_CONFIG(RCC_PLLSAI2_ADC2CLK) != RESET) { #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* f(PLLSAI2 Source) / PLLSAI2M */ pllvco = (pllvco / ((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)); #endif /* f(PLLADC2CLK) = f(VCOSAI2 input) * PLLSAI2N / PLLSAI2R */ plln = READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos) + 1U) << 1U); } } #endif /* STM32L471xx || STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || STM32L496xx || STM32L4A6xx */ /* Clock not enabled for ADC */ else { frequency = 0U; } break; #if defined(DFSDM1_Filter0) case RCC_PERIPHCLK_DFSDM1: /* Get the current DFSDM1 source */ srcclk = __HAL_RCC_GET_DFSDM1_SOURCE(); if(srcclk == RCC_DFSDM1CLKSOURCE_PCLK2) { frequency = HAL_RCC_GetPCLK2Freq(); } else { frequency = HAL_RCC_GetSysClockFreq(); } break; #if defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx) case RCC_PERIPHCLK_DFSDM1AUDIO: /* Get the current DFSDM1 audio source */ srcclk = __HAL_RCC_GET_DFSDM1AUDIO_SOURCE(); if(srcclk == RCC_DFSDM1AUDIOCLKSOURCE_SAI1) { frequency = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1); } else if((srcclk == RCC_DFSDM1AUDIOCLKSOURCE_MSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY))) { /*MSI frequency range in HZ*/ frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; } else if((srcclk == RCC_DFSDM1AUDIOCLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } /* Clock not enabled for DFSDM1 audio source */ else { frequency = 0U; } break; #endif /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */ #endif /* DFSDM1_Filter0 */ case RCC_PERIPHCLK_I2C1: /* Get the current I2C1 source */ srcclk = __HAL_RCC_GET_I2C1_SOURCE(); if(srcclk == RCC_I2C1CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_I2C1CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_I2C1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } /* Clock not enabled for I2C1 */ else { frequency = 0U; } break; #if defined(I2C2) case RCC_PERIPHCLK_I2C2: /* Get the current I2C2 source */ srcclk = __HAL_RCC_GET_I2C2_SOURCE(); if(srcclk == RCC_I2C2CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_I2C2CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_I2C2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } /* Clock not enabled for I2C2 */ else { frequency = 0U; } break; #endif /* I2C2 */ case RCC_PERIPHCLK_I2C3: /* Get the current I2C3 source */ srcclk = __HAL_RCC_GET_I2C3_SOURCE(); if(srcclk == RCC_I2C3CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_I2C3CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_I2C3CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } /* Clock not enabled for I2C3 */ else { frequency = 0U; } break; #if defined(I2C4) case RCC_PERIPHCLK_I2C4: /* Get the current I2C4 source */ srcclk = __HAL_RCC_GET_I2C4_SOURCE(); if(srcclk == RCC_I2C4CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if(srcclk == RCC_I2C4CLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_I2C4CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } /* Clock not enabled for I2C4 */ else { frequency = 0U; } break; #endif /* I2C4 */ case RCC_PERIPHCLK_LPTIM1: /* Get the current LPTIM1 source */ srcclk = __HAL_RCC_GET_LPTIM1_SOURCE(); if(srcclk == RCC_LPTIM1CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if((srcclk == RCC_LPTIM1CLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) { frequency = LSI_VALUE; } else if((srcclk == RCC_LPTIM1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if ((srcclk == RCC_LPTIM1CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for LPTIM1 */ else { frequency = 0U; } break; case RCC_PERIPHCLK_LPTIM2: /* Get the current LPTIM2 source */ srcclk = __HAL_RCC_GET_LPTIM2_SOURCE(); if(srcclk == RCC_LPTIM2CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if((srcclk == RCC_LPTIM2CLKSOURCE_LSI) && (HAL_IS_BIT_SET(RCC->CSR, RCC_CSR_LSIRDY))) { frequency = LSI_VALUE; } else if((srcclk == RCC_LPTIM2CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } else if ((srcclk == RCC_LPTIM2CLKSOURCE_LSE) && (HAL_IS_BIT_SET(RCC->BDCR, RCC_BDCR_LSERDY))) { frequency = LSE_VALUE; } /* Clock not enabled for LPTIM2 */ else { frequency = 0U; } break; #if defined(SWPMI1) case RCC_PERIPHCLK_SWPMI1: /* Get the current SWPMI1 source */ srcclk = __HAL_RCC_GET_SWPMI1_SOURCE(); if(srcclk == RCC_SWPMI1CLKSOURCE_PCLK1) { frequency = HAL_RCC_GetPCLK1Freq(); } else if((srcclk == RCC_SWPMI1CLKSOURCE_HSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_HSIRDY))) { frequency = HSI_VALUE; } /* Clock not enabled for SWPMI1 */ else { frequency = 0U; } break; #endif /* SWPMI1 */ #if defined(OCTOSPI1) || defined(OCTOSPI2) case RCC_PERIPHCLK_OSPI: /* Get the current OctoSPI clock source */ srcclk = __HAL_RCC_GET_OSPI_SOURCE(); if(srcclk == RCC_OSPICLKSOURCE_SYSCLK) { frequency = HAL_RCC_GetSysClockFreq(); } else if((srcclk == RCC_OSPICLKSOURCE_MSI) && (HAL_IS_BIT_SET(RCC->CR, RCC_CR_MSIRDY))) { /*MSI frequency range in HZ*/ frequency = MSIRangeTable[(__HAL_RCC_GET_MSI_RANGE() >> 4U)]; } else if(srcclk == RCC_OSPICLKSOURCE_PLL) { if(HAL_IS_BIT_SET(RCC->CR, RCC_CR_PLLRDY) && HAL_IS_BIT_SET(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN)) { /* f(PLL Source) / PLLM */ pllvco = (pllvco / ((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U)); /* f(PLL48M1CLK) = f(VCO input) * PLLN / PLLQ */ plln = READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos; frequency = (pllvco * plln) / (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U); } else { frequency = 0U; } } /* Clock not enabled for OctoSPI */ else { frequency = 0U; } break; #endif /* OCTOSPI1 || OCTOSPI2 */ default: break; } } return(frequency); } /** * @} */ /** @defgroup RCCEx_Exported_Functions_Group2 Extended Clock management functions * @brief Extended Clock management functions * @verbatim =============================================================================== ##### Extended clock management functions ##### =============================================================================== [..] This subsection provides a set of functions allowing to control the activation or deactivation of MSI PLL-mode, PLLSAI1, PLLSAI2, LSE CSS, Low speed clock output and clock after wake-up from STOP mode. @endverbatim * @{ */ /** * @brief Enable PLLSAI1. * @param PLLSAI1Init pointer to an RCC_PLLSAI1InitTypeDef structure that * contains the configuration information for the PLLSAI1 * @retval HAL status */ HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI1(RCC_PLLSAI1InitTypeDef *PLLSAI1Init) { uint32_t tickstart = 0U; HAL_StatusTypeDef status = HAL_OK; /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ assert_param(IS_RCC_PLLSAI1SOURCE(PLLSAI1Init->PLLSAI1Source)); assert_param(IS_RCC_PLLSAI1M_VALUE(PLLSAI1Init->PLLSAI1M)); assert_param(IS_RCC_PLLSAI1N_VALUE(PLLSAI1Init->PLLSAI1N)); assert_param(IS_RCC_PLLSAI1P_VALUE(PLLSAI1Init->PLLSAI1P)); assert_param(IS_RCC_PLLSAI1Q_VALUE(PLLSAI1Init->PLLSAI1Q)); assert_param(IS_RCC_PLLSAI1R_VALUE(PLLSAI1Init->PLLSAI1R)); assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PLLSAI1Init->PLLSAI1ClockOut)); /* Disable the PLLSAI1 */ __HAL_RCC_PLLSAI1_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI1 is ready to be updated */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* Configure the PLLSAI1 Multiplication factor N */ /* Configure the PLLSAI1 Division factors M, P, Q and R */ __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1M, PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); #else /* Configure the PLLSAI1 Multiplication factor N */ /* Configure the PLLSAI1 Division factors P, Q and R */ __HAL_RCC_PLLSAI1_CONFIG(PLLSAI1Init->PLLSAI1N, PLLSAI1Init->PLLSAI1P, PLLSAI1Init->PLLSAI1Q, PLLSAI1Init->PLLSAI1R); #endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ /* Configure the PLLSAI1 Clock output(s) */ __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PLLSAI1Init->PLLSAI1ClockOut); /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ __HAL_RCC_PLLSAI1_ENABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI1 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == RESET) { if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } } return status; } /** * @brief Disable PLLSAI1. * @retval HAL status */ HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI1(void) { uint32_t tickstart = 0U; HAL_StatusTypeDef status = HAL_OK; /* Disable the PLLSAI1 */ __HAL_RCC_PLLSAI1_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI1 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } /* Disable the PLLSAI1 Clock outputs */ __HAL_RCC_PLLSAI1CLKOUT_DISABLE(RCC_PLLSAI1CFGR_PLLSAI1PEN|RCC_PLLSAI1CFGR_PLLSAI1QEN|RCC_PLLSAI1CFGR_PLLSAI1REN); /* Reset PLL source to save power if no PLLs on */ if((READ_BIT(RCC->CR, RCC_CR_PLLRDY) == RESET) #if defined(RCC_PLLSAI2_SUPPORT) && (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == RESET) #endif /* RCC_PLLSAI2_SUPPORT */ ) { MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); } return status; } #if defined(RCC_PLLSAI2_SUPPORT) /** * @brief Enable PLLSAI2. * @param PLLSAI2Init pointer to an RCC_PLLSAI2InitTypeDef structure that * contains the configuration information for the PLLSAI2 * @retval HAL status */ HAL_StatusTypeDef HAL_RCCEx_EnablePLLSAI2(RCC_PLLSAI2InitTypeDef *PLLSAI2Init) { uint32_t tickstart = 0U; HAL_StatusTypeDef status = HAL_OK; /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ assert_param(IS_RCC_PLLSAI2SOURCE(PLLSAI2Init->PLLSAI2Source)); assert_param(IS_RCC_PLLSAI2M_VALUE(PLLSAI2Init->PLLSAI2M)); assert_param(IS_RCC_PLLSAI2N_VALUE(PLLSAI2Init->PLLSAI2N)); assert_param(IS_RCC_PLLSAI2P_VALUE(PLLSAI2Init->PLLSAI2P)); #if defined(RCC_PLLSAI2Q_DIV_SUPPORT) assert_param(IS_RCC_PLLSAI2Q_VALUE(PLLSAI2Init->PLLSAI2Q)); #endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ assert_param(IS_RCC_PLLSAI2R_VALUE(PLLSAI2Init->PLLSAI2R)); assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PLLSAI2Init->PLLSAI2ClockOut)); /* Disable the PLLSAI2 */ __HAL_RCC_PLLSAI2_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI2 is ready to be updated */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2Q_DIV_SUPPORT) /* Configure the PLLSAI2 Multiplication factor N */ /* Configure the PLLSAI2 Division factors M, P, Q and R */ __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); #elif defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* Configure the PLLSAI2 Multiplication factor N */ /* Configure the PLLSAI2 Division factors M, P and R */ __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2M, PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); #elif defined(RCC_PLLSAI2Q_DIV_SUPPORT) /* Configure the PLLSAI2 Multiplication factor N */ /* Configure the PLLSAI2 Division factors P, Q and R */ __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2Q, PLLSAI2Init->PLLSAI2R); #else /* Configure the PLLSAI2 Multiplication factor N */ /* Configure the PLLSAI2 Division factors P and R */ __HAL_RCC_PLLSAI2_CONFIG(PLLSAI2Init->PLLSAI2N, PLLSAI2Init->PLLSAI2P, PLLSAI2Init->PLLSAI2R); #endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ /* Configure the PLLSAI2 Clock output(s) */ __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PLLSAI2Init->PLLSAI2ClockOut); /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ __HAL_RCC_PLLSAI2_ENABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI2 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == RESET) { if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } } return status; } /** * @brief Disable PLLISAI2. * @retval HAL status */ HAL_StatusTypeDef HAL_RCCEx_DisablePLLSAI2(void) { uint32_t tickstart = 0U; HAL_StatusTypeDef status = HAL_OK; /* Disable the PLLSAI2 */ __HAL_RCC_PLLSAI2_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI2 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } /* Disable the PLLSAI2 Clock outputs */ #if defined(RCC_PLLSAI2Q_DIV_SUPPORT) __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2QEN|RCC_PLLSAI2CFGR_PLLSAI2REN); #else __HAL_RCC_PLLSAI2CLKOUT_DISABLE(RCC_PLLSAI2CFGR_PLLSAI2PEN|RCC_PLLSAI2CFGR_PLLSAI2REN); #endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2Q_DIV_SUPPORT */ /* Reset PLL source to save power if no PLLs on */ if((READ_BIT(RCC->CR, RCC_CR_PLLRDY) == RESET) && (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == RESET) ) { MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, RCC_PLLSOURCE_NONE); } return status; } #endif /* RCC_PLLSAI2_SUPPORT */ /** * @brief Configure the oscillator clock source for wakeup from Stop and CSS backup clock. * @param WakeUpClk Wakeup clock * This parameter can be one of the following values: * @arg @ref RCC_STOP_WAKEUPCLOCK_MSI MSI oscillator selection * @arg @ref RCC_STOP_WAKEUPCLOCK_HSI HSI oscillator selection * @note This function shall not be called after the Clock Security System on HSE has been * enabled. * @retval None */ void HAL_RCCEx_WakeUpStopCLKConfig(uint32_t WakeUpClk) { assert_param(IS_RCC_STOP_WAKEUPCLOCK(WakeUpClk)); __HAL_RCC_WAKEUPSTOP_CLK_CONFIG(WakeUpClk); } /** * @brief Configure the MSI range after standby mode. * @note After Standby its frequency can be selected between 4 possible values (1, 2, 4 or 8 MHz). * @param MSIRange MSI range * This parameter can be one of the following values: * @arg @ref RCC_MSIRANGE_4 Range 4 around 1 MHz * @arg @ref RCC_MSIRANGE_5 Range 5 around 2 MHz * @arg @ref RCC_MSIRANGE_6 Range 6 around 4 MHz (reset value) * @arg @ref RCC_MSIRANGE_7 Range 7 around 8 MHz * @retval None */ void HAL_RCCEx_StandbyMSIRangeConfig(uint32_t MSIRange) { assert_param(IS_RCC_MSI_STANDBY_CLOCK_RANGE(MSIRange)); __HAL_RCC_MSI_STANDBY_RANGE_CONFIG(MSIRange); } /** * @brief Enable the LSE Clock Security System. * @note Prior to enable the LSE Clock Security System, LSE oscillator is to be enabled * with HAL_RCC_OscConfig() and the LSE oscillator clock is to be selected as RTC * clock with HAL_RCCEx_PeriphCLKConfig(). * @retval None */ void HAL_RCCEx_EnableLSECSS(void) { SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; } /** * @brief Disable the LSE Clock Security System. * @note LSE Clock Security System can only be disabled after a LSE failure detection. * @retval None */ void HAL_RCCEx_DisableLSECSS(void) { CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; /* Disable LSE CSS IT if any */ __HAL_RCC_DISABLE_IT(RCC_IT_LSECSS); } /** * @brief Enable the LSE Clock Security System Interrupt & corresponding EXTI line. * @note LSE Clock Security System Interrupt is mapped on RTC EXTI line 19 * @retval None */ void HAL_RCCEx_EnableLSECSS_IT(void) { /* Enable LSE CSS */ SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON) ; /* Enable LSE CSS IT */ __HAL_RCC_ENABLE_IT(RCC_IT_LSECSS); /* Enable IT on EXTI Line 19 */ __HAL_RCC_LSECSS_EXTI_ENABLE_IT(); __HAL_RCC_LSECSS_EXTI_ENABLE_RISING_EDGE(); } /** * @brief Handle the RCC LSE Clock Security System interrupt request. * @retval None */ void HAL_RCCEx_LSECSS_IRQHandler(void) { /* Check RCC LSE CSSF flag */ if(__HAL_RCC_GET_IT(RCC_IT_LSECSS)) { /* RCC LSE Clock Security System interrupt user callback */ HAL_RCCEx_LSECSS_Callback(); /* Clear RCC LSE CSS pending bit */ __HAL_RCC_CLEAR_IT(RCC_IT_LSECSS); } } /** * @brief RCCEx LSE Clock Security System interrupt callback. * @retval none */ __weak void HAL_RCCEx_LSECSS_Callback(void) { /* NOTE : This function should not be modified, when the callback is needed, the @ref HAL_RCCEx_LSECSS_Callback should be implemented in the user file */ } /** * @brief Select the Low Speed clock source to output on LSCO pin (PA2). * @param LSCOSource specifies the Low Speed clock source to output. * This parameter can be one of the following values: * @arg @ref RCC_LSCOSOURCE_LSI LSI clock selected as LSCO source * @arg @ref RCC_LSCOSOURCE_LSE LSE clock selected as LSCO source * @retval None */ void HAL_RCCEx_EnableLSCO(uint32_t LSCOSource) { GPIO_InitTypeDef GPIO_InitStruct; FlagStatus pwrclkchanged = RESET; FlagStatus backupchanged = RESET; /* Check the parameters */ assert_param(IS_RCC_LSCOSOURCE(LSCOSource)); /* LSCO Pin Clock Enable */ __LSCO_CLK_ENABLE(); /* Configue the LSCO pin in analog mode */ GPIO_InitStruct.Pin = LSCO_PIN; GPIO_InitStruct.Mode = GPIO_MODE_ANALOG; GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; GPIO_InitStruct.Pull = GPIO_NOPULL; HAL_GPIO_Init(LSCO_GPIO_PORT, &GPIO_InitStruct); /* Update LSCOSEL clock source in Backup Domain control register */ if(__HAL_RCC_PWR_IS_CLK_DISABLED()) { __HAL_RCC_PWR_CLK_ENABLE(); pwrclkchanged = SET; } if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) { HAL_PWR_EnableBkUpAccess(); backupchanged = SET; } MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL | RCC_BDCR_LSCOEN, LSCOSource | RCC_BDCR_LSCOEN); if(backupchanged == SET) { HAL_PWR_DisableBkUpAccess(); } if(pwrclkchanged == SET) { __HAL_RCC_PWR_CLK_DISABLE(); } } /** * @brief Disable the Low Speed clock output. * @retval None */ void HAL_RCCEx_DisableLSCO(void) { FlagStatus pwrclkchanged = RESET; FlagStatus backupchanged = RESET; /* Update LSCOEN bit in Backup Domain control register */ if(__HAL_RCC_PWR_IS_CLK_DISABLED()) { __HAL_RCC_PWR_CLK_ENABLE(); pwrclkchanged = SET; } if(HAL_IS_BIT_CLR(PWR->CR1, PWR_CR1_DBP)) { /* Enable access to the backup domain */ HAL_PWR_EnableBkUpAccess(); backupchanged = SET; } CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN); /* Restore previous configuration */ if(backupchanged == SET) { /* Disable access to the backup domain */ HAL_PWR_DisableBkUpAccess(); } if(pwrclkchanged == SET) { __HAL_RCC_PWR_CLK_DISABLE(); } } /** * @brief Enable the PLL-mode of the MSI. * @note Prior to enable the PLL-mode of the MSI for automatic hardware * calibration LSE oscillator is to be enabled with HAL_RCC_OscConfig(). * @retval None */ void HAL_RCCEx_EnableMSIPLLMode(void) { SET_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; } /** * @brief Disable the PLL-mode of the MSI. * @note PLL-mode of the MSI is automatically reset when LSE oscillator is disabled. * @retval None */ void HAL_RCCEx_DisableMSIPLLMode(void) { CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN) ; } /** * @} */ #if defined(CRS) /** @defgroup RCCEx_Exported_Functions_Group3 Extended Clock Recovery System Control functions * @brief Extended Clock Recovery System Control functions * @verbatim =============================================================================== ##### Extended Clock Recovery System Control functions ##### =============================================================================== [..] For devices with Clock Recovery System feature (CRS), RCC Extention HAL driver can be used as follows: (#) In System clock config, HSI48 needs to be enabled (#) Enable CRS clock in IP MSP init which will use CRS functions (#) Call CRS functions as follows: (##) Prepare synchronization configuration necessary for HSI48 calibration (+++) Default values can be set for frequency Error Measurement (reload and error limit) and also HSI48 oscillator smooth trimming. (+++) Macro __HAL_RCC_CRS_RELOADVALUE_CALCULATE can be also used to calculate directly reload value with target and sychronization frequencies values (##) Call function HAL_RCCEx_CRSConfig which (+++) Resets CRS registers to their default values. (+++) Configures CRS registers with synchronization configuration (+++) Enables automatic calibration and frequency error counter feature Note: When using USB LPM (Link Power Management) and the device is in Sleep mode, the periodic USB SOF will not be generated by the host. No SYNC signal will therefore be provided to the CRS to calibrate the HSI48 on the run. To guarantee the required clock precision after waking up from Sleep mode, the LSE or reference clock on the GPIOs should be used as SYNC signal. (##) A polling function is provided to wait for complete synchronization (+++) Call function HAL_RCCEx_CRSWaitSynchronization() (+++) According to CRS status, user can decide to adjust again the calibration or continue application if synchronization is OK (#) User can retrieve information related to synchronization in calling function HAL_RCCEx_CRSGetSynchronizationInfo() (#) Regarding synchronization status and synchronization information, user can try a new calibration in changing synchronization configuration and call again HAL_RCCEx_CRSConfig. Note: When the SYNC event is detected during the downcounting phase (before reaching the zero value), it means that the actual frequency is lower than the target (and so, that the TRIM value should be incremented), while when it is detected during the upcounting phase it means that the actual frequency is higher (and that the TRIM value should be decremented). (#) In interrupt mode, user can resort to the available macros (__HAL_RCC_CRS_XXX_IT). Interrupts will go through CRS Handler (CRS_IRQn/CRS_IRQHandler) (++) Call function HAL_RCCEx_CRSConfig() (++) Enable CRS_IRQn (thanks to NVIC functions) (++) Enable CRS interrupt (__HAL_RCC_CRS_ENABLE_IT) (++) Implement CRS status management in the following user callbacks called from HAL_RCCEx_CRS_IRQHandler(): (+++) HAL_RCCEx_CRS_SyncOkCallback() (+++) HAL_RCCEx_CRS_SyncWarnCallback() (+++) HAL_RCCEx_CRS_ExpectedSyncCallback() (+++) HAL_RCCEx_CRS_ErrorCallback() (#) To force a SYNC EVENT, user can use the function HAL_RCCEx_CRSSoftwareSynchronizationGenerate(). This function can be called before calling HAL_RCCEx_CRSConfig (for instance in Systick handler) @endverbatim * @{ */ /** * @brief Start automatic synchronization for polling mode * @param pInit Pointer on RCC_CRSInitTypeDef structure * @retval None */ void HAL_RCCEx_CRSConfig(RCC_CRSInitTypeDef *pInit) { uint32_t value = 0; /* Check the parameters */ assert_param(IS_RCC_CRS_SYNC_DIV(pInit->Prescaler)); assert_param(IS_RCC_CRS_SYNC_SOURCE(pInit->Source)); assert_param(IS_RCC_CRS_SYNC_POLARITY(pInit->Polarity)); assert_param(IS_RCC_CRS_RELOADVALUE(pInit->ReloadValue)); assert_param(IS_RCC_CRS_ERRORLIMIT(pInit->ErrorLimitValue)); assert_param(IS_RCC_CRS_HSI48CALIBRATION(pInit->HSI48CalibrationValue)); /* CONFIGURATION */ /* Before configuration, reset CRS registers to their default values*/ __HAL_RCC_CRS_FORCE_RESET(); __HAL_RCC_CRS_RELEASE_RESET(); /* Set the SYNCDIV[2:0] bits according to Prescaler value */ /* Set the SYNCSRC[1:0] bits according to Source value */ /* Set the SYNCSPOL bit according to Polarity value */ value = (pInit->Prescaler | pInit->Source | pInit->Polarity); /* Set the RELOAD[15:0] bits according to ReloadValue value */ value |= pInit->ReloadValue; /* Set the FELIM[7:0] bits according to ErrorLimitValue value */ value |= (pInit->ErrorLimitValue << CRS_CFGR_FELIM_Pos); WRITE_REG(CRS->CFGR, value); /* Adjust HSI48 oscillator smooth trimming */ /* Set the TRIM[5:0] bits according to RCC_CRS_HSI48CalibrationValue value */ MODIFY_REG(CRS->CR, CRS_CR_TRIM, (pInit->HSI48CalibrationValue << CRS_CR_TRIM_Pos)); /* START AUTOMATIC SYNCHRONIZATION*/ /* Enable Automatic trimming & Frequency error counter */ SET_BIT(CRS->CR, CRS_CR_AUTOTRIMEN | CRS_CR_CEN); } /** * @brief Generate the software synchronization event * @retval None */ void HAL_RCCEx_CRSSoftwareSynchronizationGenerate(void) { SET_BIT(CRS->CR, CRS_CR_SWSYNC); } /** * @brief Return synchronization info * @param pSynchroInfo Pointer on RCC_CRSSynchroInfoTypeDef structure * @retval None */ void HAL_RCCEx_CRSGetSynchronizationInfo(RCC_CRSSynchroInfoTypeDef *pSynchroInfo) { /* Check the parameter */ assert_param(pSynchroInfo != NULL); /* Get the reload value */ pSynchroInfo->ReloadValue = (READ_BIT(CRS->CFGR, CRS_CFGR_RELOAD)); /* Get HSI48 oscillator smooth trimming */ pSynchroInfo->HSI48CalibrationValue = (READ_BIT(CRS->CR, CRS_CR_TRIM) >> CRS_CR_TRIM_Pos); /* Get Frequency error capture */ pSynchroInfo->FreqErrorCapture = (READ_BIT(CRS->ISR, CRS_ISR_FECAP) >> CRS_ISR_FECAP_Pos); /* Get Frequency error direction */ pSynchroInfo->FreqErrorDirection = (READ_BIT(CRS->ISR, CRS_ISR_FEDIR)); } /** * @brief Wait for CRS Synchronization status. * @param Timeout Duration of the timeout * @note Timeout is based on the maximum time to receive a SYNC event based on synchronization * frequency. * @note If Timeout set to HAL_MAX_DELAY, HAL_TIMEOUT will be never returned. * @retval Combination of Synchronization status * This parameter can be a combination of the following values: * @arg @ref RCC_CRS_TIMEOUT * @arg @ref RCC_CRS_SYNCOK * @arg @ref RCC_CRS_SYNCWARN * @arg @ref RCC_CRS_SYNCERR * @arg @ref RCC_CRS_SYNCMISS * @arg @ref RCC_CRS_TRIMOVF */ uint32_t HAL_RCCEx_CRSWaitSynchronization(uint32_t Timeout) { uint32_t crsstatus = RCC_CRS_NONE; uint32_t tickstart = 0U; /* Get timeout */ tickstart = HAL_GetTick(); /* Wait for CRS flag or timeout detection */ do { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0U) || ((HAL_GetTick() - tickstart) > Timeout)) { crsstatus = RCC_CRS_TIMEOUT; } } /* Check CRS SYNCOK flag */ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCOK)) { /* CRS SYNC event OK */ crsstatus |= RCC_CRS_SYNCOK; /* Clear CRS SYNC event OK bit */ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCOK); } /* Check CRS SYNCWARN flag */ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCWARN)) { /* CRS SYNC warning */ crsstatus |= RCC_CRS_SYNCWARN; /* Clear CRS SYNCWARN bit */ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCWARN); } /* Check CRS TRIM overflow flag */ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_TRIMOVF)) { /* CRS SYNC Error */ crsstatus |= RCC_CRS_TRIMOVF; /* Clear CRS Error bit */ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_TRIMOVF); } /* Check CRS Error flag */ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCERR)) { /* CRS SYNC Error */ crsstatus |= RCC_CRS_SYNCERR; /* Clear CRS Error bit */ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCERR); } /* Check CRS SYNC Missed flag */ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_SYNCMISS)) { /* CRS SYNC Missed */ crsstatus |= RCC_CRS_SYNCMISS; /* Clear CRS SYNC Missed bit */ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_SYNCMISS); } /* Check CRS Expected SYNC flag */ if(__HAL_RCC_CRS_GET_FLAG(RCC_CRS_FLAG_ESYNC)) { /* frequency error counter reached a zero value */ __HAL_RCC_CRS_CLEAR_FLAG(RCC_CRS_FLAG_ESYNC); } } while(RCC_CRS_NONE == crsstatus); return crsstatus; } /** * @brief Handle the Clock Recovery System interrupt request. * @retval None */ void HAL_RCCEx_CRS_IRQHandler(void) { uint32_t crserror = RCC_CRS_NONE; /* Get current IT flags and IT sources values */ uint32_t itflags = READ_REG(CRS->ISR); uint32_t itsources = READ_REG(CRS->CR); /* Check CRS SYNCOK flag */ if(((itflags & RCC_CRS_FLAG_SYNCOK) != RESET) && ((itsources & RCC_CRS_IT_SYNCOK) != RESET)) { /* Clear CRS SYNC event OK flag */ WRITE_REG(CRS->ICR, CRS_ICR_SYNCOKC); /* user callback */ HAL_RCCEx_CRS_SyncOkCallback(); } /* Check CRS SYNCWARN flag */ else if(((itflags & RCC_CRS_FLAG_SYNCWARN) != RESET) && ((itsources & RCC_CRS_IT_SYNCWARN) != RESET)) { /* Clear CRS SYNCWARN flag */ WRITE_REG(CRS->ICR, CRS_ICR_SYNCWARNC); /* user callback */ HAL_RCCEx_CRS_SyncWarnCallback(); } /* Check CRS Expected SYNC flag */ else if(((itflags & RCC_CRS_FLAG_ESYNC) != RESET) && ((itsources & RCC_CRS_IT_ESYNC) != RESET)) { /* frequency error counter reached a zero value */ WRITE_REG(CRS->ICR, CRS_ICR_ESYNCC); /* user callback */ HAL_RCCEx_CRS_ExpectedSyncCallback(); } /* Check CRS Error flags */ else { if(((itflags & RCC_CRS_FLAG_ERR) != RESET) && ((itsources & RCC_CRS_IT_ERR) != RESET)) { if((itflags & RCC_CRS_FLAG_SYNCERR) != RESET) { crserror |= RCC_CRS_SYNCERR; } if((itflags & RCC_CRS_FLAG_SYNCMISS) != RESET) { crserror |= RCC_CRS_SYNCMISS; } if((itflags & RCC_CRS_FLAG_TRIMOVF) != RESET) { crserror |= RCC_CRS_TRIMOVF; } /* Clear CRS Error flags */ WRITE_REG(CRS->ICR, CRS_ICR_ERRC); /* user error callback */ HAL_RCCEx_CRS_ErrorCallback(crserror); } } } /** * @brief RCCEx Clock Recovery System SYNCOK interrupt callback. * @retval none */ __weak void HAL_RCCEx_CRS_SyncOkCallback(void) { /* NOTE : This function should not be modified, when the callback is needed, the @ref HAL_RCCEx_CRS_SyncOkCallback should be implemented in the user file */ } /** * @brief RCCEx Clock Recovery System SYNCWARN interrupt callback. * @retval none */ __weak void HAL_RCCEx_CRS_SyncWarnCallback(void) { /* NOTE : This function should not be modified, when the callback is needed, the @ref HAL_RCCEx_CRS_SyncWarnCallback should be implemented in the user file */ } /** * @brief RCCEx Clock Recovery System Expected SYNC interrupt callback. * @retval none */ __weak void HAL_RCCEx_CRS_ExpectedSyncCallback(void) { /* NOTE : This function should not be modified, when the callback is needed, the @ref HAL_RCCEx_CRS_ExpectedSyncCallback should be implemented in the user file */ } /** * @brief RCCEx Clock Recovery System Error interrupt callback. * @param Error Combination of Error status. * This parameter can be a combination of the following values: * @arg @ref RCC_CRS_SYNCERR * @arg @ref RCC_CRS_SYNCMISS * @arg @ref RCC_CRS_TRIMOVF * @retval none */ __weak void HAL_RCCEx_CRS_ErrorCallback(uint32_t Error) { /* Prevent unused argument(s) compilation warning */ UNUSED(Error); /* NOTE : This function should not be modified, when the callback is needed, the @ref HAL_RCCEx_CRS_ErrorCallback should be implemented in the user file */ } /** * @} */ #endif /* CRS */ /** * @} */ /** @addtogroup RCCEx_Private_Functions * @{ */ /** * @brief Configure the parameters N & P & optionally M of PLLSAI1 and enable PLLSAI1 output clock(s). * @param PllSai1 pointer to an RCC_PLLSAI1InitTypeDef structure that * contains the configuration parameters N & P & optionally M as well as PLLSAI1 output clock(s) * @param Divider divider parameter to be updated * * @note PLLSAI1 is temporary disable to apply new parameters * * @retval HAL status */ static HAL_StatusTypeDef RCCEx_PLLSAI1_Config(RCC_PLLSAI1InitTypeDef *PllSai1, uint32_t Divider) { uint32_t tickstart = 0U; HAL_StatusTypeDef status = HAL_OK; /* check for PLLSAI1 Parameters used to output PLLSAI1CLK */ /* P, Q and R dividers are verified in each specific divider case below */ assert_param(IS_RCC_PLLSAI1SOURCE(PllSai1->PLLSAI1Source)); assert_param(IS_RCC_PLLSAI1M_VALUE(PllSai1->PLLSAI1M)); assert_param(IS_RCC_PLLSAI1N_VALUE(PllSai1->PLLSAI1N)); assert_param(IS_RCC_PLLSAI1CLOCKOUT_VALUE(PllSai1->PLLSAI1ClockOut)); /* Check that PLLSAI1 clock source and divider M can be applied */ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) { /* PLL clock source and divider M already set, check that no request for change */ if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai1->PLLSAI1Source) || (PllSai1->PLLSAI1Source == RCC_PLLSOURCE_NONE) #if !defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) || (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai1->PLLSAI1M) #endif ) { status = HAL_ERROR; } } else { /* Check PLLSAI1 clock source availability */ switch(PllSai1->PLLSAI1Source) { case RCC_PLLSOURCE_MSI: if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) { status = HAL_ERROR; } break; case RCC_PLLSOURCE_HSI: if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) { status = HAL_ERROR; } break; case RCC_PLLSOURCE_HSE: if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY) && HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) { status = HAL_ERROR; } break; default: status = HAL_ERROR; break; } if(status == HAL_OK) { #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* Set PLLSAI1 clock source */ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai1->PLLSAI1Source); #else /* Set PLLSAI1 clock source and divider M */ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai1->PLLSAI1Source | (PllSai1->PLLSAI1M - 1U) << RCC_PLLCFGR_PLLM_Pos); #endif } } if(status == HAL_OK) { /* Disable the PLLSAI1 */ __HAL_RCC_PLLSAI1_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI1 is ready to be updated */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { if(Divider == DIVIDER_P_UPDATE) { assert_param(IS_RCC_PLLSAI1P_VALUE(PllSai1->PLLSAI1P)); #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* Configure the PLLSAI1 Division factor M, P and Multiplication factor N*/ #if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV | RCC_PLLSAI1CFGR_PLLSAI1M, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos) | ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); #else MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P | RCC_PLLSAI1CFGR_PLLSAI1M, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos) | ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); #endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ #else /* Configure the PLLSAI1 Division factor P and Multiplication factor N*/ #if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT) MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | (PllSai1->PLLSAI1P << RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos)); #else MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | ((PllSai1->PLLSAI1P >> 4U) << RCC_PLLSAI1CFGR_PLLSAI1P_Pos)); #endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */ #endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ } else if(Divider == DIVIDER_Q_UPDATE) { assert_param(IS_RCC_PLLSAI1Q_VALUE(PllSai1->PLLSAI1Q)); #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* Configure the PLLSAI1 Division factor M, Q and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q | RCC_PLLSAI1CFGR_PLLSAI1M, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) | ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); #else /* Configure the PLLSAI1 Division factor Q and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | (((PllSai1->PLLSAI1Q >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1Q_Pos)); #endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ } else { assert_param(IS_RCC_PLLSAI1R_VALUE(PllSai1->PLLSAI1R)); #if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) /* Configure the PLLSAI1 Division factor M, R and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R | RCC_PLLSAI1CFGR_PLLSAI1M, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos) | ((PllSai1->PLLSAI1M - 1U) << RCC_PLLSAI1CFGR_PLLSAI1M_Pos)); #else /* Configure the PLLSAI1 Division factor R and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, (PllSai1->PLLSAI1N << RCC_PLLSAI1CFGR_PLLSAI1N_Pos) | (((PllSai1->PLLSAI1R >> 1U) - 1U) << RCC_PLLSAI1CFGR_PLLSAI1R_Pos)); #endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */ } /* Enable the PLLSAI1 again by setting PLLSAI1ON to 1*/ __HAL_RCC_PLLSAI1_ENABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI1 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == RESET) { if((HAL_GetTick() - tickstart) > PLLSAI1_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { /* Configure the PLLSAI1 Clock output(s) */ __HAL_RCC_PLLSAI1CLKOUT_ENABLE(PllSai1->PLLSAI1ClockOut); } } } return status; } #if defined(RCC_PLLSAI2_SUPPORT) /** * @brief Configure the parameters N & P & optionally M of PLLSAI2 and enable PLLSAI2 output clock(s). * @param PllSai2 pointer to an RCC_PLLSAI2InitTypeDef structure that * contains the configuration parameters N & P & optionally M as well as PLLSAI2 output clock(s) * @param Divider divider parameter to be updated * * @note PLLSAI2 is temporary disable to apply new parameters * * @retval HAL status */ static HAL_StatusTypeDef RCCEx_PLLSAI2_Config(RCC_PLLSAI2InitTypeDef *PllSai2, uint32_t Divider) { uint32_t tickstart = 0U; HAL_StatusTypeDef status = HAL_OK; /* check for PLLSAI2 Parameters used to output PLLSAI2CLK */ /* P, Q and R dividers are verified in each specific divider case below */ assert_param(IS_RCC_PLLSAI2SOURCE(PllSai2->PLLSAI2Source)); assert_param(IS_RCC_PLLSAI2M_VALUE(PllSai2->PLLSAI2M)); assert_param(IS_RCC_PLLSAI2N_VALUE(PllSai2->PLLSAI2N)); assert_param(IS_RCC_PLLSAI2CLOCKOUT_VALUE(PllSai2->PLLSAI2ClockOut)); /* Check that PLLSAI2 clock source and divider M can be applied */ if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_NONE) { /* PLL clock source and divider M already set, check that no request for change */ if((__HAL_RCC_GET_PLL_OSCSOURCE() != PllSai2->PLLSAI2Source) || (PllSai2->PLLSAI2Source == RCC_PLLSOURCE_NONE) #if !defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) || (((READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U) != PllSai2->PLLSAI2M) #endif ) { status = HAL_ERROR; } } else { /* Check PLLSAI2 clock source availability */ switch(PllSai2->PLLSAI2Source) { case RCC_PLLSOURCE_MSI: if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_MSIRDY)) { status = HAL_ERROR; } break; case RCC_PLLSOURCE_HSI: if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSIRDY)) { status = HAL_ERROR; } break; case RCC_PLLSOURCE_HSE: if(HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSERDY) && HAL_IS_BIT_CLR(RCC->CR, RCC_CR_HSEBYP)) { status = HAL_ERROR; } break; default: status = HAL_ERROR; break; } if(status == HAL_OK) { #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* Set PLLSAI2 clock source */ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PllSai2->PLLSAI2Source); #else /* Set PLLSAI2 clock source and divider M */ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, PllSai2->PLLSAI2Source | (PllSai2->PLLSAI2M - 1U) << RCC_PLLCFGR_PLLM_Pos); #endif } } if(status == HAL_OK) { /* Disable the PLLSAI2 */ __HAL_RCC_PLLSAI2_DISABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI2 is ready to be updated */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) != RESET) { if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { if(Divider == DIVIDER_P_UPDATE) { assert_param(IS_RCC_PLLSAI2P_VALUE(PllSai2->PLLSAI2P)); #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* Configure the PLLSAI2 Division factor M, P and Multiplication factor N*/ #if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV | RCC_PLLSAI2CFGR_PLLSAI2M, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos) | ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); #else MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P | RCC_PLLSAI2CFGR_PLLSAI2M, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos) | ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); #endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ #else /* Configure the PLLSAI2 Division factor P and Multiplication factor N*/ #if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT) MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | (PllSai2->PLLSAI2P << RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos)); #else MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | ((PllSai2->PLLSAI2P >> 4U) << RCC_PLLSAI2CFGR_PLLSAI2P_Pos)); #endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */ #endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ } #if defined(RCC_PLLSAI2Q_DIV_SUPPORT) else if(Divider == DIVIDER_Q_UPDATE) { assert_param(IS_RCC_PLLSAI2Q_VALUE(PllSai2->PLLSAI2Q)); #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* Configure the PLLSAI2 Division factor M, Q and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q | RCC_PLLSAI2CFGR_PLLSAI2M, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) | ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); #else /* Configure the PLLSAI2 Division factor Q and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | (((PllSai2->PLLSAI2Q >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2Q_Pos)); #endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ } #endif /* RCC_PLLSAI2Q_DIV_SUPPORT */ else { assert_param(IS_RCC_PLLSAI2R_VALUE(PllSai2->PLLSAI2R)); #if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) /* Configure the PLLSAI2 Division factor M, R and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R | RCC_PLLSAI2CFGR_PLLSAI2M, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos) | ((PllSai2->PLLSAI2M - 1U) << RCC_PLLSAI2CFGR_PLLSAI2M_Pos)); #else /* Configure the PLLSAI2 Division factor R and Multiplication factor N*/ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, (PllSai2->PLLSAI2N << RCC_PLLSAI2CFGR_PLLSAI2N_Pos) | (((PllSai2->PLLSAI2R >> 1U) - 1U) << RCC_PLLSAI2CFGR_PLLSAI2R_Pos)); #endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */ } /* Enable the PLLSAI2 again by setting PLLSAI2ON to 1*/ __HAL_RCC_PLLSAI2_ENABLE(); /* Get Start Tick*/ tickstart = HAL_GetTick(); /* Wait till PLLSAI2 is ready */ while(READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == RESET) { if((HAL_GetTick() - tickstart) > PLLSAI2_TIMEOUT_VALUE) { status = HAL_TIMEOUT; break; } } if(status == HAL_OK) { /* Configure the PLLSAI2 Clock output(s) */ __HAL_RCC_PLLSAI2CLKOUT_ENABLE(PllSai2->PLLSAI2ClockOut); } } } return status; } #endif /* RCC_PLLSAI2_SUPPORT */ /** * @} */ /** * @} */ #endif /* HAL_RCC_MODULE_ENABLED */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/