Merge pull request #468 from PavelSindler/M600_currents

M600 unload current

Firmware/Configuration_prusa.h

@@ -56,7 +56,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define X_MIN_POS 0
 #define Y_MAX_POS 210
 #define Y_MIN_POS -4 //orig -4
-#define Z_MAX_POS 210
+#define Z_MAX_POS 200
 #define Z_MIN_POS 0.15
 
 // Canceled home position
@@ -231,10 +231,12 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define DIGIPOT_MOTOR_CURRENT_LOUD {135,135,135,135,135}
 
 // Motor Current settings for RAMBo mini PWM value = MotorCurrentSetting * 255 / range
-#if MOTHERBOARD == 200 || MOTHERBOARD == 203 || MOTHERBOARD == 310
+#if MOTHERBOARD == 203 || MOTHERBOARD == 200
 #define MOTOR_CURRENT_PWM_RANGE 2000
-#define DEFAULT_PWM_MOTOR_CURRENT  {400, 750, 750} // {XY,Z,E}
-#define DEFAULT_PWM_MOTOR_CURRENT_LOUD  {400, 750, 750} // {XY,Z,E}
+#define DEFAULT_PWM_MOTOR_CURRENT  {270, 830, 450} // {XY,Z,E}
+#define DEFAULT_PWM_MOTOR_CURRENT_LOUD  {540, 830, 500} // {XY,Z,E}
+#define Z_SILENT 0
+#define Z_HIGH_POWER 200
 #endif
 
 /*------------------------------------

Firmware/Marlin_main.cpp

@@ -5775,7 +5775,14 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
 #ifdef TMC2130
             uint8_t tmc2130_current_r_bckp = tmc2130_current_r[E_AXIS];
             tmc2130_set_current_r(E_AXIS, TMC2130_UNLOAD_CURRENT_R);
+#else 
+
+			digipot_current(2, 200); //set lower E motor current for unload to protect filament sensor and ptfe tube
+			float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT;
+			float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
+
 #endif //TMC2130
+
             target[E_AXIS] -= 45;
             plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 5200 / 60, active_extruder);
             st_synchronize();
@@ -5785,9 +5792,15 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
             target[E_AXIS] -= 20;
             plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 1000 / 60, active_extruder);
             st_synchronize();
+
 #ifdef TMC2130            
             tmc2130_set_current_r(E_AXIS, tmc2130_current_r_bckp);
+#else
+			uint8_t silentMode = eeprom_read_byte((uint8_t*)EEPROM_SILENT);
+			if(silentMode) digipot_current(2, tmp_motor[2]); //set E back to normal operation currents
+			else digipot_current(2, tmp_motor_loud[2]);		
 #endif //TMC2130
+
 #endif // SNMM