Toggle FSENSOR and FSENSOR_AUTOLOAD

Firmware/messages.c

@@ -40,9 +40,8 @@ const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[] PROGMEM_I1 = ISTR(" of 4"); ////
 const char MSG_FINISHING_MOVEMENTS[] PROGMEM_I1 = ISTR("Finishing movements"); ////c=20 r=1
 const char MSG_FOLLOW_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
 const char MSG_FOLLOW_Z_CALIBRATION_FLOW[] PROGMEM_I1 = ISTR("There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."); ////c=20 r=8
-const char MSG_FSENS_AUTOLOAD_NA[] PROGMEM_I1 = ISTR("F. autoload [N/A]"); ////c=17 r=1
-const char MSG_FSENSOR_OFF[] PROGMEM_I1 = ISTR("Fil. sensor [off]"); ////
-const char MSG_FSENSOR_ON[] PROGMEM_I1 = ISTR("Fil. sensor  [on]"); ////
+const char MSG_FSENSOR_AUTOLOAD[] PROGMEM_I1 = ISTR("F. autoload"); ////c=17 r=1
+const char MSG_FSENSOR[] PROGMEM_I1 = ISTR("Fil. sensor"); ////
 const char MSG_HEATING[] PROGMEM_I1 = ISTR("Heating"); ////
 const char MSG_HEATING_COMPLETE[] PROGMEM_I1 = ISTR("Heating done."); ////c=20
 const char MSG_HOMEYZ[] PROGMEM_I1 = ISTR("Calibrate Z"); ////

Firmware/messages.h

@@ -41,9 +41,8 @@ extern const char MSG_FIND_BED_OFFSET_AND_SKEW_LINE2[];
 extern const char MSG_FINISHING_MOVEMENTS[];
 extern const char MSG_FOLLOW_CALIBRATION_FLOW[];
 extern const char MSG_FOLLOW_Z_CALIBRATION_FLOW[];
-extern const char MSG_FSENS_AUTOLOAD_NA[];
-extern const char MSG_FSENSOR_OFF[];
-extern const char MSG_FSENSOR_ON[];
+extern const char MSG_FSENSOR_AUTOLOAD[];
+extern const char MSG_FSENSOR[];
 extern const char MSG_HEATING[];
 extern const char MSG_HEATING_COMPLETE[];
 extern const char MSG_HOMEYZ[];

Firmware/ultralcd.cpp

@@ -5056,29 +5056,29 @@ do\
         if (fsensor_not_responding && (mmu_enabled == false))\
         {\
             /* Filament sensor not working*/\
-            MENU_ITEM_FUNCTION_P(_i("Fil. sensor [N/A]"), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\
-            MENU_ITEM_SUBMENU_P(_T(MSG_FSENS_AUTOLOAD_NA), lcd_fsensor_fail);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\
+            MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_fsensor_fail);\
         }\
         else\
         {\
             /* Filament sensor turned off, working, no problems*/\
-            MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_OFF), lcd_fsensor_state_set);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);\
             if (mmu_enabled == false)\
             {\
-                MENU_ITEM_SUBMENU_P(_T(MSG_FSENS_AUTOLOAD_NA), lcd_filament_autoload_info);\
+                MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_filament_autoload_info);\
             }\
         }\
     }\
     else\
     {\
         /* Filament sensor turned on, working, no problems*/\
-        MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_ON), lcd_fsensor_state_set);\
+        MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);\
         if (mmu_enabled == false)\
         {\
             if (fsensor_autoload_enabled)\
-                MENU_ITEM_FUNCTION_P(_i("F. autoload  [on]"), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_ON c=17 r=1*/\
+                MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_ON), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_ON c=17 r=1*/\
             else\
-                MENU_ITEM_FUNCTION_P(_i("F. autoload [off]"), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_OFF c=17 r=1*/\
+                MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_OFF), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_OFF c=17 r=1*/\
             /*if (fsensor_oq_meassure_enabled)*/\
                 /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass. [on]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_ON c=17 r=1*/\
             /*else*/\
@@ -6865,10 +6865,10 @@ static void lcd_tune_menu()
 
 #ifdef FILAMENT_SENSOR
 	if (FSensorStateMenu == 0) {
-		MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_OFF), lcd_fsensor_state_set);
+		MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);
 	}
 	else {
-		MENU_ITEM_FUNCTION_P(_T(MSG_FSENSOR_ON), lcd_fsensor_state_set);
+		MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);
 	}
 #endif //FILAMENT_SENSOR
 

lang/lang_en.txt

@@ -202,14 +202,8 @@
 #
 "Fail stats MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
 
 #
 "Fail stats"
@@ -223,14 +217,8 @@
 #MSG_FANS_CHECK
 "Fans check"
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
+#MSG_FSENSOR
+"Fil. sensor"
 
 #
 "Filam. runouts"

lang/lang_en_cz.txt

@@ -270,17 +270,9 @@
 "Fail stats MMU"
 "Selhani MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-"F. autozav. [zap]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"F. autozav. [N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"F. autozav. [vyp]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
+"F. autozav."
 
 #
 "Fail stats"
@@ -298,17 +290,9 @@
 "Fans check"
 "Kontr. vent."
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Fil. senzor [zap]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Fil. senzor [N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Fil. senzor [vyp]"
+#MSG_FSENSOR
+"Fil. sensor"
+"Fil. senzor"
 
 #
 "Filam. runouts"

lang/lang_en_de.txt

@@ -270,17 +270,9 @@
 "Fail stats MMU"
 "MMU-Fehler"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-"F.Autoladen  [an]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"F. Autoload  [nv]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"F. Autoload [aus]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
+"F. autoladen"
 
 #
 "Fail stats"
@@ -298,17 +290,9 @@
 "Fans check"
 "Luefter Chk."
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Fil. Sensor  [an]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Fil. Sensor  [nv]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Fil. Sensor [aus]"
+#MSG_FSENSOR
+"Fil. sensor"
+"\x00"
 
 #
 "Filam. runouts"

lang/lang_en_es.txt

@@ -270,17 +270,9 @@
 "Fail stats MMU"
 "Estadistica de fallos MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-"Autocarg.Fil[act]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autocarg.Fil[N/D]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autocarg.Fil[ina]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
+"Autocarg.fil."
 
 #
 "Fail stats"
@@ -298,17 +290,9 @@
 "Fans check"
 "Comprob.vent"
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Sensor Fil. [act]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Sensor Fil. [N/D]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Sensor Fil. [ina]"
+#MSG_FSENSOR
+"Fil. sensor"
+"Sensor Fil."
 
 #
 "Filam. runouts"

lang/lang_en_fr.txt

@@ -270,17 +270,9 @@
 "Fail stats MMU"
 "Stat. echecs MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-"ChargAuto f. [on]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"AutoCharg F [N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"AutoCharg F [off]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
+"Charg.auto.F."
 
 #
 "Fail stats"
@@ -298,17 +290,9 @@
 "Fans check"
 "Verif ventilo"
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Capteur Fil. [on]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Capteur Fil. [N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Capteur Fil.[off]"
+#MSG_FSENSOR
+"Fil. sensor"
+"Capteur Fil."
 
 #
 "Filam. runouts"

lang/lang_en_it.txt

@@ -270,17 +270,9 @@
 "Fail stats MMU"
 "Statistiche fallimenti MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-"Autocar.filam[on]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autocar.fil.[N/A]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autocar.fil.[off]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
+"Autocar.filam"
 
 #
 "Fail stats"
@@ -298,17 +290,9 @@
 "Fans check"
 "Control.vent"
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Sensor filam.[On]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Sensor filam[N/A]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Sensor filam[off]"
+#MSG_FSENSOR
+"Fil. sensor"
+"Sensor filam."
 
 #
 "Filam. runouts"

lang/lang_en_pl.txt

@@ -270,17 +270,9 @@
 "Fail stats MMU"
 "Bledy MMU"
 
-#MSG_FSENS_AUTOLOAD_ON c=17 r=1
-"F. autoload  [on]"
-"Autolad. fil [wl]"
-
-#MSG_FSENS_AUTOLOAD_NA c=17 r=1
-"F. autoload [N/A]"
-"Autolad.fil.[N/D]"
-
-#MSG_FSENS_AUTOLOAD_OFF c=17 r=1
-"F. autoload [off]"
-"Autolad.fil.[wyl]"
+#MSG_FSENSOR_AUTOLOAD
+"F. autoload"
+"Autolad. fil."
 
 #
 "Fail stats"
@@ -298,17 +290,9 @@
 "Fans check"
 "Sprawd.went."
 
-#MSG_FSENSOR_ON
-"Fil. sensor  [on]"
-"Czuj. filam. [wl]"
-
-#MSG_FSENSOR_NA
-"Fil. sensor [N/A]"
-"Czuj. filam.[N/D]"
-
-#MSG_FSENSOR_OFF
-"Fil. sensor [off]"
-"Czuj. filam.[wyl]"
+#MSG_FSENSOR
+"Fil. sensor"
+"Czuj. filam."
 
 #
 "Filam. runouts"