Lang - text "PowerUp" removed from dictionary

Firmware/Marlin_main.cpp

@@ -1150,12 +1150,12 @@ void setup()
 
 	// Check startup - does nothing if bootloader sets MCUSR to 0
 	byte mcu = MCUSR;
-/*	if (mcu & 1) SERIAL_ECHOLNRPGM(_T(MSG_POWERUP));
+/*	if (mcu & 1) SERIAL_ECHOLNRPGM(MSG_POWERUP);
 	if (mcu & 2) SERIAL_ECHOLNRPGM(MSG_EXTERNAL_RESET);
 	if (mcu & 4) SERIAL_ECHOLNRPGM(MSG_BROWNOUT_RESET);
 	if (mcu & 8) SERIAL_ECHOLNRPGM(MSG_WATCHDOG_RESET);
 	if (mcu & 32) SERIAL_ECHOLNRPGM(MSG_SOFTWARE_RESET);*/
-	if (mcu & 1) puts_P(_T(MSG_POWERUP));
+	if (mcu & 1) puts_P(MSG_POWERUP);
 	if (mcu & 2) puts_P(MSG_EXTERNAL_RESET);
 	if (mcu & 4) puts_P(MSG_BROWNOUT_RESET);
 	if (mcu & 8) puts_P(MSG_WATCHDOG_RESET);

Firmware/messages.c

@@ -62,7 +62,6 @@ const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=0 r=0
 const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=8
 const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=4
 const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20 r=0
-const char MSG_POWERUP[] PROGMEM_I1 = ISTR("PowerUp"); ////c=0 r=0
 const char MSG_PREHEAT_NOZZLE[] PROGMEM_I1 = ISTR("Preheat the nozzle!"); ////c=20 r=0
 const char MSG_PRESS_TO_UNLOAD[] PROGMEM_I1 = ISTR("Please press the knob to unload filament"); ////c=20 r=4
 const char MSG_PRINT_ABORTED[] PROGMEM_I1 = ISTR("Print aborted"); ////c=20 r=0
@@ -122,3 +121,4 @@ const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////
 const char MSG_OK[] PROGMEM_N1 = "ok"; ////c=0 r=0
 const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////c=0 r=0
 const char MSG_ENDSTOP_OPEN[] PROGMEM_N1 = "open"; ////c=0 r=0
+const char MSG_POWERUP[] PROGMEM_N1 = "PowerUp"; ////c=0 r=0

Firmware/messages.h

@@ -63,7 +63,6 @@ extern const char MSG_NOZZLE[];
 extern const char MSG_PAPER[];
 extern const char MSG_PLACE_STEEL_SHEET[];
 extern const char MSG_PLEASE_WAIT[];
-extern const char MSG_POWERUP[];
 extern const char MSG_PREHEAT_NOZZLE[];
 extern const char MSG_PRESS_TO_UNLOAD[];
 extern const char MSG_PRINT_ABORTED[];
@@ -123,6 +122,7 @@ extern const char MSG_SD_ERR_WRITE_TO_FILE[];
 extern const char MSG_OK[];
 extern const char MSG_SD_OPEN_FILE_FAIL[];
 extern const char MSG_ENDSTOP_OPEN[];
+extern const char MSG_POWERUP[];
 
 #if defined(__cplusplus)
 }

lang/lang_en.txt

@@ -628,9 +628,6 @@
 #MSG_PLEASE_WAIT c=20 r=0
 "Please wait"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-
 #
 "Please remove shipping helpers first."
 

lang/lang_en_cz.txt

@@ -838,10 +838,6 @@
 "Please wait"
 "Prosim cekejte"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-"Zapnuti"
-
 #
 "Please remove shipping helpers first."
 "Nejprve prosim sundejte transportni soucastky."

lang/lang_en_de.txt

@@ -838,10 +838,6 @@
 "Please wait"
 "Bitte warten"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-"Einschalten"
-
 #
 "Please remove shipping helpers first."
 "Bitte zuerst Transportsicherungen entfernen."

lang/lang_en_es.txt

@@ -838,10 +838,6 @@
 "Please wait"
 "Por Favor Espere"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-"Encendido"
-
 #
 "Please remove shipping helpers first."
 "Por favor retira los soportes de envio primero."

lang/lang_en_fr.txt

@@ -838,10 +838,6 @@
 "Please wait"
 "Merci de patienter"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-"Demarrage"
-
 #
 "Please remove shipping helpers first."
 "Veuillez retirer d'abord les protections d'envoi."

lang/lang_en_it.txt

@@ -838,10 +838,6 @@
 "Please wait"
 "Attendere"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-"Accendi"
-
 #
 "Please remove shipping helpers first."
 "Per favore rimuovete i materiali da spedizione"

lang/lang_en_pl.txt

@@ -838,10 +838,6 @@
 "Please wait"
 "Prosze czekac"
 
-#MSG_POWERUP c=0 r=0
-"PowerUp"
-"Uruchamianie"
-
 #
 "Please remove shipping helpers first."
 "Najpierw usun zabezpieczenia transportowe"