Merge pull request #3774 from 3d-gussner/MK3_Nozzle_change

PFW-1435 Nozzle change menu

Firmware/messages.cpp

@@ -170,6 +170,9 @@ extern const char MSG_PAUSED_THERMAL_ERROR[] PROGMEM_I1 = ISTR("PAUSED THERMAL E
 extern const char MSG_THERMAL_ANOMALY[] PROGMEM_I1 = ISTR("THERMAL ANOMALY");////MSG_THERMAL_ANOMALY c=20
 #endif
 extern const char MSG_LOAD_ALL[] PROGMEM_I1 = ISTR("Load All"); ////MSG_LOAD_ALL c=18
+extern const char MSG_NOZZLE_CNG_MENU [] PROGMEM_I1 = ISTR("Nozzle change");////MSG_NOZZLE_CNG_MENU c=18
+extern const char MSG_NOZZLE_CNG_READ_HELP [] PROGMEM_I1 = ISTR("For a Nozzle change please read\nprusa.io/nozzle-mk3s");////MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+extern const char MSG_NOZZLE_CNG_CHANGED [] PROGMEM_I1 = ISTR("Hotend at 280C! Nozzle changed and tightened to specs?");////MSG_NOZZLE_CNG_CHANGED c=20 r=6
 
 //not internationalized messages
 #if 0

Firmware/messages.h

@@ -174,6 +174,9 @@ extern const char MSG_PAUSED_THERMAL_ERROR[];
 extern const char MSG_THERMAL_ANOMALY[];
 #endif
 extern const char MSG_LOAD_ALL[];
+extern const char MSG_NOZZLE_CNG_MENU [];
+extern const char MSG_NOZZLE_CNG_READ_HELP [];
+extern const char MSG_NOZZLE_CNG_CHANGED [];
 
 //not internationalized messages
 #if 0

Firmware/ultralcd.cpp

@@ -823,6 +823,7 @@ void print_stop();
 
 void lcd_commands()
 {
+    // printf_P(PSTR("lcd_commands begin, lcd_commands_type=%u, lcd_commands_step=%u\n"), (uint8_t)lcd_commands_type, lcd_commands_step);
     if (planner_aborted) {
         // we are still within an aborted command. do not process any LCD command until we return
         return;
@@ -1005,6 +1006,57 @@ void lcd_commands()
         }
     }
 #endif //TEMP_MODEL
+
+	if (lcd_commands_type == LcdCommands::NozzleCNG)
+	{
+        if (!blocks_queued() && cmd_buffer_empty() && !saved_printing)
+        {
+            switch(lcd_commands_step)
+            {
+            case 0:
+                lcd_commands_step = 3;
+                break;
+            case 3:
+                lcd_update_enabled = false; //hack to avoid lcd_update recursion.
+                lcd_show_fullscreen_message_and_wait_P(_T(MSG_NOZZLE_CNG_READ_HELP));
+                lcd_update_enabled = true;
+                lcd_draw_update = 2; //force lcd clear and update after the stack unwinds.
+                enquecommand_P(PSTR("G28 W"));
+                enquecommand_P(PSTR("G1 X125 Y10 Z150 F1000"));
+                enquecommand_P(PSTR("M109 S280"));
+#ifdef TEMP_MODEL
+                //enquecommand_P(PSTR("M310 S0"));
+                temp_model_set_enabled(false);
+#endif //TEMP_MODEL
+                lcd_commands_step = 2;
+                break;
+            case 2:
+                //|0123456789012456789|
+                //|Hotend at 280C!
+                //|Nozzle changed and
+                //|tightend to specs?
+                //| Yes     No
+                enquecommand_P(PSTR("M84 XY"));
+                lcd_update_enabled = false; //hack to avoid lcd_update recursion.
+                if (lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_NOZZLE_CNG_CHANGED), false) == LCD_LEFT_BUTTON_CHOICE) {
+#ifdef TEMP_MODEL
+                //enquecommand_P(PSTR("M310 S1"));
+                temp_model_set_enabled(true);
+#endif //TEMP_MODEL
+                //enquecommand_P(PSTR("M104 S0"));
+                setTargetHotendSafe(0,0);
+                lcd_commands_step = 1;
+                }
+                lcd_update_enabled = true;
+                break;
+            case 1:
+                lcd_setstatuspgm(MSG_WELCOME);
+                lcd_commands_step = 0;
+                lcd_commands_type = LcdCommands::Idle;
+                break;
+            }
+        }
+    }
 }
 
 void lcd_return_to_status()
@@ -2942,6 +2994,11 @@ static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg)
             char c = char(pgm_read_byte(msg));
             if (c == '~')
                 c = ' ';
+            else if (c == '\n') {
+                // Abort early if '\n' is encontered.
+                // This character is used to force the following words to be printed on the next line.
+                break;
+            }
             lcd_print(c);
         }
     }
@@ -4503,6 +4560,12 @@ static void sheets_menu()
     MENU_END();
 }
 
+static void nozzle_change()
+{
+    lcd_commands_type = LcdCommands::NozzleCNG;
+    lcd_return_to_status();
+}
+
 void lcd_hw_setup_menu(void)                      // can not be "static"
 {
     typedef struct
@@ -4525,6 +4588,7 @@ void lcd_hw_setup_menu(void)                      // can not be "static"
 
     MENU_ITEM_SUBMENU_P(_T(MSG_STEEL_SHEETS), sheets_menu);
     SETTINGS_NOZZLE;
+    MENU_ITEM_FUNCTION_P(_T(MSG_NOZZLE_CNG_MENU),nozzle_change);
     MENU_ITEM_SUBMENU_P(_i("Checks"), lcd_checking_menu);  ////MSG_CHECKS c=18
 
 #if defined(FILAMENT_SENSOR) && (FILAMENT_SENSOR_TYPE == FSENSOR_IR_ANALOG)

Firmware/ultralcd.h

@@ -119,6 +119,7 @@ enum class LcdCommands : uint_least8_t
 #ifdef TEMP_MODEL
     TempModel,
 #endif //TEMP_MODEL
+    NozzleCNG,
 };
 
 extern LcdCommands lcd_commands_type;

lang/po/Firmware.pot

@@ -743,6 +743,13 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -853,6 +860,11 @@ msgstr ""
 msgid "Homing"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1295,6 +1307,11 @@ msgstr ""
 msgid "Nozzle"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_cs.po

@@ -775,6 +775,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Prutok"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"Instrukce pro výměnu trysky najdete na\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -895,6 +904,11 @@ msgstr "Vys. vykon"
 msgid "Homing"
 msgstr "Homing"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Hotend má 280C! Tryska vyměněna a dotažena dle instrukcí?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1345,6 +1359,11 @@ msgstr "Nyni odstrante testovaci vytisk z tiskoveho platu."
 msgid "Nozzle"
 msgstr "Tryska"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Výměna trysek"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_da.po

@@ -750,6 +750,13 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -862,6 +869,11 @@ msgstr ""
 msgid "Homing"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1304,6 +1316,11 @@ msgstr ""
 msgid "Nozzle"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_de.po

@@ -781,6 +781,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Durchfluss"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"Für Düsenwechsel lesen Sie bitte\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -902,6 +911,11 @@ msgstr "Hohe leist"
 msgid "Homing"
 msgstr "Startposition"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Hotend bei 280C! Düse gewechselt, gemäß Spezifikation angezogen?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1358,6 +1372,11 @@ msgstr "Testdruck jetzt von Stahlblech entfernen."
 msgid "Nozzle"
 msgstr "Düse"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Düsenwechsel"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_es.po

@@ -777,6 +777,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Flujo"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"Para un cambio de boquilla, lee\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -898,6 +907,11 @@ msgstr "Rend.pleno"
 msgid "Homing"
 msgstr "Homing"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Fusor a 280C! Boquilla cambiado y ajust. a la medida?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1351,6 +1365,11 @@ msgstr "Ahora retira la prueba de la lamina de acero."
 msgid "Nozzle"
 msgstr "Boquilla"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Cambio de boquilla"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_fr.po

@@ -781,6 +781,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Flux"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"Pour un changement de buse, lire\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -904,6 +913,11 @@ msgstr "Haut.puiss"
 msgid "Homing"
 msgstr "Mise a zero"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Hotend à 280C! Buse changée et resserrée aux spécifications?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1359,6 +1373,11 @@ msgstr "Retirez maintenant l'impression de test de la plaque en acier."
 msgid "Nozzle"
 msgstr "Buse"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Changement de buse"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_hr.po

@@ -774,6 +774,13 @@ msgstr ""
 msgid "Flow"
 msgstr "Protok"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -895,6 +902,11 @@ msgstr "Visoka sna"
 msgid "Homing"
 msgstr "Navodjenje"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1348,6 +1360,11 @@ msgstr "Sada uklonite probni print sa celicne ploce."
 msgid "Nozzle"
 msgstr "Mlaznica"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_hu.po

@@ -777,6 +777,13 @@ msgstr ""
 msgid "Flow"
 msgstr "Flow"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -898,6 +905,11 @@ msgstr "Magas ero"
 msgid "Homing"
 msgstr "Homeolas"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1351,6 +1363,11 @@ msgstr "Vedd le a tesztnyomatot az acellaprol."
 msgid "Nozzle"
 msgstr "Fuvoka"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_it.po

@@ -778,6 +778,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Flusso"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"Per la sostituzione dell'ugello, leggere\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -899,6 +908,11 @@ msgstr "Forte"
 msgid "Homing"
 msgstr "Homing"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Hotend a 280C! Ugello cambiato e serrato secondo le specifiche?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1350,6 +1364,11 @@ msgstr "Ora rimuovete la stampa di prova dalla piastra in acciaio."
 msgid "Nozzle"
 msgstr "Ugello"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Cambio dell'ugello"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_lb.po

@@ -750,6 +750,13 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -862,6 +869,11 @@ msgstr ""
 msgid "Homing"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1304,6 +1316,11 @@ msgstr ""
 msgid "Nozzle"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_lt.po

@@ -750,6 +750,13 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -862,6 +869,11 @@ msgstr ""
 msgid "Homing"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1304,6 +1316,11 @@ msgstr ""
 msgid "Nozzle"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_nl.po

@@ -779,6 +779,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Stromen"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"Voor een spuitstukwissel lees\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -900,6 +909,11 @@ msgstr "Hoog verm."
 msgid "Homing"
 msgstr "Startpositie"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Hotend op 280C! Mondstuk vervangen en aangedraaid volgens specificaties?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1351,6 +1365,11 @@ msgstr "Verwijder nu de testprint van staalplaat."
 msgid "Nozzle"
 msgstr "Tuit"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Tuit wisselen"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_no.po

@@ -775,6 +775,13 @@ msgstr "Først skal jeg kjøre en selvtest for å sjekke vanlige byggefeil."
 msgid "Flow"
 msgstr "Flyt"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -892,6 +899,11 @@ msgstr "Høy styrke"
 msgid "Homing"
 msgstr "Søker"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1342,6 +1354,11 @@ msgstr "Fjern nå testprintet fra stålplaten."
 msgid "Nozzle"
 msgstr "Dyse"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_pl.po

@@ -778,6 +778,15 @@ msgstr ""
 msgid "Flow"
 msgstr "Przeplyw"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+"W celu wymiany dyszy należy przeczytać\n"
+"prusa.io/nozzle-mk3s"
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -896,6 +905,11 @@ msgstr "Wysoka wyd"
 msgid "Homing"
 msgstr "Bazowanie"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr "Hotend rozgrzany do 280°C! Dysza wymieniona i dokręcona wg specyfikacji?"
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1348,6 +1362,11 @@ msgstr "Teraz zdejmij wydruk testowy ze stolu."
 msgid "Nozzle"
 msgstr "Dysza"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr "Wymiana dyszy"
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_ro.po

@@ -779,6 +779,13 @@ msgstr ""
 msgid "Flow"
 msgstr "Flow"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -899,6 +906,11 @@ msgstr "Put. max"
 msgid "Homing"
 msgstr "Homing"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1349,6 +1361,11 @@ msgstr "Acum inlaturati printul de test de pe suprafata de print."
 msgid "Nozzle"
 msgstr "Varf"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_sk.po

@@ -776,6 +776,13 @@ msgstr ""
 msgid "Flow"
 msgstr "Prietok"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -895,6 +902,11 @@ msgstr "Vys. vykon"
 msgid "Homing"
 msgstr "Navrat"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1345,6 +1357,11 @@ msgstr "Teraz odstrante testovaci vytlacok z platne."
 msgid "Nozzle"
 msgstr "Tryska"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_sl.po

@@ -750,6 +750,13 @@ msgstr ""
 msgid "Flow"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -862,6 +869,11 @@ msgstr ""
 msgid "Homing"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1304,6 +1316,11 @@ msgstr ""
 msgid "Nozzle"
 msgstr ""
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."

lang/po/Firmware_sv.po

@@ -776,6 +776,13 @@ msgstr ""
 msgid "Flow"
 msgstr "Flöde"
 
+#. MSG_NOZZLE_CNG_READ_HELP c=20 r=4
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:1019
+msgid ""
+"For a Nozzle change please read\n"
+"prusa.io/nozzle-mk3s"
+msgstr ""
+
 #. MSG_SELFTEST_PART_FAN c=20
 #: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
 #: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
@@ -897,6 +904,11 @@ msgstr "Hög kraft"
 msgid "Homing"
 msgstr "Flyttar till hempos"
 
+#. MSG_NOZZLE_CNG_CHANGED c=20 r=6
+#: ../../Firmware/messages.cpp:174 ../../Firmware/ultralcd.cpp:1036
+msgid "Hotend at 280C! Nozzle changed and tightened to specs?"
+msgstr ""
+
 #. MSG_HOTEND_FAN_SPEED c=15
 #: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
 #: ../../Firmware/ultralcd.cpp:7301
@@ -1350,6 +1362,11 @@ msgstr "Ta nu bort testutskriften från metallskivan."
 msgid "Nozzle"
 msgstr "Munstycke"
 
+#. MSG_NOZZLE_CNG_MENU c=18
+#: ../../Firmware/messages.cpp:173 ../../Firmware/ultralcd.cpp:4580
+msgid "Nozzle change"
+msgstr ""
+
 #. MSG_NOZZLE_DIAMETER c=10
 #: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."