Define #MSG_PINDA c=6 and remove duplicate saved 8 bytes

Firmware/messages.c

@@ -73,6 +73,7 @@ const char MSG_NO[] PROGMEM_I1 = ISTR("No"); ////c=3
 const char MSG_NOZZLE[] PROGMEM_I1 = ISTR("Nozzle"); ////c=12
 const char MSG_PAPER[] PROGMEM_I1 = ISTR("Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."); ////c=20 r=10
 const char MSG_PAUSE_PRINT[] PROGMEM_I1 = ISTR("Pause print");////c=18
+const char MSG_PINDA[] PROGMEM_I1 = ISTR("PINDA");////c=6
 const char MSG_PLACE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please place steel sheet on heatbed."); ////c=20 r=5
 const char MSG_PLEASE_WAIT[] PROGMEM_I1 = ISTR("Please wait"); ////c=20
 const char MSG_POWER_FAILURES[] PROGMEM_I1 = ISTR("Power failures"); ////c=15

Firmware/messages.h

@@ -72,6 +72,7 @@ extern const char MSG_NO[];
 extern const char MSG_NOZZLE[];
 extern const char MSG_PAPER[];
 extern const char MSG_PAUSE_PRINT[];
+extern const char MSG_PINDA[];
 extern const char MSG_PLACE_STEEL_SHEET[];
 extern const char MSG_PLEASE_WAIT[];
 extern const char MSG_POWER_FAILURES[];

Firmware/ultralcd.cpp

@@ -1724,7 +1724,7 @@ static void lcd_menu_temperatures()
     lcd_menu_temperatures_line( _i("Ambient"), (int)current_temperature_ambient );  ////MSG_AMBIENT c=14
 #endif //AMBIENT_THERMISTOR
 #ifdef PINDA_THERMISTOR
-    lcd_menu_temperatures_line( _i("PINDA"), (int)current_temperature_pinda );  ////c=14
+    lcd_menu_temperatures_line( _T(MSG_PINDA), (int)current_temperature_pinda );  ////MSG_PINDA
 #endif //PINDA_THERMISTOR
     menu_back_if_clicked();
 }
@@ -3764,7 +3764,7 @@ static void lcd_show_sensors_state()
 		finda_state = mmu_finda;
 	}
 	//lcd_puts_at_P(0, 0, _i("Sensor state"));
-	lcd_puts_at_P(0, 0, _i("PINDA"));
+	lcd_puts_at_P(0, 0, _T(MSG_PINDA));
 	lcd_set_cursor(LCD_WIDTH - 14, 0);
 	lcd_print_state(pinda_state);
 	

lang/lang_en.txt

@@ -616,7 +616,7 @@
 #MSG_WIZARD_HEATING c=20 r=3
 "Preheating nozzle. Please wait."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 
 #MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20

lang/lang_en_cz.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Predehrev trysky. Prosim cekejte."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"
 

lang/lang_en_de.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Vorheizen der Duese. Bitte warten."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"
 

lang/lang_en_es.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Precalentando nozzle. Espera por favor."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"
 

lang/lang_en_fr.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Prechauffage de la buse. Merci de patienter."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"
 

lang/lang_en_it.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Preriscaldando l'ugello. Attendere prego."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"
 

lang/lang_en_nl.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Opwarmen van de tuit. Wacht aub."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"
 

lang/lang_en_pl.txt

@@ -822,7 +822,7 @@
 "Preheating nozzle. Please wait."
 "Nagrzewanie dyszy. Prosze czekac."
 
-# c=14
+#MSG_PINDA c=6
 "PINDA"
 "\x00"