Fix *_MAX_ACCEL integer overflow.

Firmware/temperature.cpp

@@ -1473,7 +1473,7 @@ void bed_min_temp_error(void) {
     }
 #ifndef BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE
     Stop();
-#endif*/
+#endif
 }
 
 #ifdef HEATER_0_USES_MAX6675

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -96,12 +96,12 @@
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 
 //Silent mode limits
-#define SILENT_MAX_ACCEL  960 // max axxeleration in silent mode in mm/s^2
+#define SILENT_MAX_ACCEL  960ul // max axxeleration in silent mode in mm/s^2
 #define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
 #define SILENT_MAX_FEEDRATE 172  //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
 
 //Normal mode limits
-#define NORMAL_MAX_ACCEL 2500 // Y-axis max axxeleration in normal mode in mm/s^2
+#define NORMAL_MAX_ACCEL 2500ul // Y-axis max axxeleration in normal mode in mm/s^2
 #define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
 #define NORMAL_MAX_FEEDRATE 200  //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
 

Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h

@@ -97,12 +97,12 @@
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 
 //Silent mode limits
-#define SILENT_MAX_ACCEL  960 // max axxeleration in silent mode in mm/s^2
+#define SILENT_MAX_ACCEL  960ul // max axxeleration in silent mode in mm/s^2
 #define SILENT_MAX_ACCEL_ST (100*SILENT_MAX_ACCEL) // max accel in steps/s^2
 #define SILENT_MAX_FEEDRATE 172  //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)
 
 //Normal mode limits
-#define NORMAL_MAX_ACCEL 2500 // Y-axis max axxeleration in normal mode in mm/s^2
+#define NORMAL_MAX_ACCEL 2500ul // Y-axis max axxeleration in normal mode in mm/s^2
 #define NORMAL_MAX_ACCEL_ST (100*NORMAL_MAX_ACCEL) // max accel in steps/s^2
 #define NORMAL_MAX_FEEDRATE 200  //max feedrate in mm/s, because mode switched to normal for homming , this value limits also homing, it should be greater (172mm/s=9600mm/min>2700mm/min)