Update POT/PO files

Translations of INSPECT_FINDA are to be done yet.

lang/po/Firmware.pot

@@ -888,6 +888,11 @@ msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr ""
 
@@ -1011,16 +1016,16 @@ msgstr ""
 msgid "Load filament"
 msgstr ""
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr ""
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"

lang/po/Firmware_cs.po

@@ -930,6 +930,11 @@ msgstr "CHYBA POHYBU IDLERU"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "NEPLATNY NASTROJ"
 
@@ -1057,16 +1062,16 @@ msgstr "Nacist vse"
 msgid "Load filament"
 msgstr "Zavest filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Zavest do extr."
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Zavest do trysky"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2496,6 +2501,9 @@ msgstr "🔃Obnovit"
 #~ msgid "Load all"
 #~ msgstr "Zavest vse"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Zavest do extr."
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Kal. prvni vrstvy"
 

lang/po/Firmware_da.po

@@ -897,6 +897,11 @@ msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr ""
 
@@ -1020,16 +1025,16 @@ msgstr ""
 msgid "Load filament"
 msgstr ""
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr ""
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"

lang/po/Firmware_de.po

@@ -939,6 +939,11 @@ msgstr "SPANNROL. SITZT FEST"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "UNGÜLTIGER FIL.PLATZ"
 
@@ -1069,16 +1074,16 @@ msgstr "Alle laden"
 msgid "Load filament"
 msgstr "Filament laden"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Lade zum Extruder"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "In Düse laden"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2524,6 +2529,9 @@ msgstr "🔃Aktualisiere"
 #~ msgid "Load all"
 #~ msgstr "Alle laden"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Lade zum Extruder"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Erste-Schicht Kal."
 

lang/po/Firmware_es.po

@@ -933,6 +933,11 @@ msgstr "TENSOR: ERROR MOV."
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "HERR. INVALIDA"
 
@@ -1061,16 +1066,16 @@ msgstr "Intr. todos fil."
 msgid "Load filament"
 msgstr "Introducir filam."
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Cargar al extrusor"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Cargar a boquilla"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2522,6 +2527,9 @@ msgstr "🔃Actualizar"
 #~ msgid "Load all"
 #~ msgstr "Intr. todos fil."
 
+#~ msgid "Load to extruder"
+#~ msgstr "Cargar al extrusor"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Cal. primera cap."
 

lang/po/Firmware_fr.po

@@ -940,6 +940,11 @@ msgstr "ECHEC MOUV.T IDLER"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "OUTIL INVALIDE"
 
@@ -1069,16 +1074,16 @@ msgstr "Tout Charger"
 msgid "Load filament"
 msgstr "Charger filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Charger vers extr."
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Charger la buse"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2532,6 +2537,9 @@ msgstr "🔃Rafraichir"
 #~ msgid "Load all"
 #~ msgstr "Charger un par un"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Charger vers extr."
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Cal. 1ere couche"
 

lang/po/Firmware_hr.po

@@ -930,6 +930,11 @@ msgstr "KLIZAC NIJE POMAKNUT"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "NEVALJAN ALAT"
 
@@ -1058,16 +1063,16 @@ msgstr "Puni sve"
 msgid "Load filament"
 msgstr "Napunite filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Puni u ekstruder"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Punjenje u mlazn"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2507,6 +2512,9 @@ msgstr "🔃Osvjeziti"
 #~ msgid "Load all"
 #~ msgstr "Napuni sve"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Puni u ekstruder"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Prvi sloj kal."
 

lang/po/Firmware_hu.po

@@ -933,6 +933,11 @@ msgstr "GORGO NEM MOZOG"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "HELYTELEN SZERSZAM"
 
@@ -1062,16 +1067,16 @@ msgstr "Ossz.bet"
 msgid "Load filament"
 msgstr "Filament betolt."
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Extruderbe toltes"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Betolt. fuvokahoz"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2512,6 +2517,9 @@ msgstr "🔃Frissites"
 #~ msgid "Load all"
 #~ msgstr "Osszes betolt."
 
+#~ msgid "Load to extruder"
+#~ msgstr "Extruderbe toltes"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117. Elso reteg kalibr."
 

lang/po/Firmware_it.po

@@ -934,6 +934,11 @@ msgstr "IDLER BLOCCATO"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "STRUM NON VAL"
 
@@ -1062,16 +1067,16 @@ msgstr "Carica tutti"
 msgid "Load filament"
 msgstr "Carica filamento"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Carica su estr."
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Carica ugello"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2514,6 +2519,9 @@ msgstr "🔃Ricaricare"
 #~ msgid "Load all"
 #~ msgstr "Caricare tutti"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Carica su estr."
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Calibr. primo strato"
 

lang/po/Firmware_lb.po

@@ -897,6 +897,11 @@ msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr ""
 
@@ -1020,16 +1025,16 @@ msgstr ""
 msgid "Load filament"
 msgstr ""
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr ""
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"

lang/po/Firmware_lt.po

@@ -897,6 +897,11 @@ msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr ""
 
@@ -1020,16 +1025,16 @@ msgstr ""
 msgid "Load filament"
 msgstr ""
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr ""
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"

lang/po/Firmware_nl.po

@@ -935,6 +935,11 @@ msgstr "SPANROL BEWEGT NIET"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "ONGELDIG TOOL"
 
@@ -1063,16 +1068,16 @@ msgstr "Laad alle"
 msgid "Load filament"
 msgstr "Filament laden"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Laad naar extruder"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Tot tuit laden"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2518,6 +2523,9 @@ msgstr "🔃Refresh"
 #~ msgid "Load all"
 #~ msgstr "Laad alle"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Laad naar extruder"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Eerste laag kal."
 

lang/po/Firmware_no.po

@@ -927,6 +927,11 @@ msgstr "IDLER CANNOT MOVE"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "UGYLDIG VERKTØY"
 
@@ -1054,16 +1059,16 @@ msgstr "Last Alle"
 msgid "Load filament"
 msgstr "Last inn filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Last til ekstruder"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Last til dysen"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2486,6 +2491,9 @@ msgstr "🔃Forfriske"
 #~ msgid "Load all"
 #~ msgstr "Last alle"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Last til ekstruder"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Førstelagskal."
 

lang/po/Firmware_pl.po

@@ -931,6 +931,11 @@ msgstr "DOCISK NIE RUSZA SIE"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "BLEDNE NARZEDZIE"
 
@@ -1060,16 +1065,16 @@ msgstr "Zalad. wszystkie"
 msgid "Load filament"
 msgstr "Ladowanie fil."
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Zalad. do ekstr."
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Zaladuj do dyszy"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2508,6 +2513,9 @@ msgstr "🔃Odswiezac"
 #~ msgid "Load all"
 #~ msgstr "Zalad. wszystkie"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Zalad. do ekstr."
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Kal. 1. warstwy"
 

lang/po/Firmware_ro.po

@@ -934,6 +934,11 @@ msgstr "IDLER NU SE MISCA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "INSTRUMENT INVALID"
 
@@ -1061,16 +1066,16 @@ msgstr "Incarca toate"
 msgid "Load filament"
 msgstr "Incarca filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Incarc la extruder"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Incarca la varf"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2512,6 +2517,9 @@ msgstr "🔃Reimprospata"
 #~ msgid "Load all"
 #~ msgstr "Incarcati toate"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Incarc la extruder"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Cal. first layer"
 

lang/po/Firmware_sk.po

@@ -930,6 +930,11 @@ msgstr "IDLER CANNOT MOVE"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "INVALID TOOL"
 
@@ -1057,16 +1062,16 @@ msgstr "Zaviest vsetko"
 msgid "Load filament"
 msgstr "Zaviest filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Zaviest do extr."
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Zaved. do trysky"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2496,6 +2501,9 @@ msgstr "🔃Obnovit"
 #~ msgid "Load all"
 #~ msgstr "Zaviest vsetko"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Zaviest do extr."
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Kal. prvej vrstvy"
 

lang/po/Firmware_sl.po

@@ -897,6 +897,11 @@ msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr ""
 
@@ -1020,16 +1025,16 @@ msgstr ""
 msgid "Load filament"
 msgstr ""
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr ""
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"

lang/po/Firmware_sv.po

@@ -933,6 +933,11 @@ msgstr "IDLER KAN EJ FLYTTA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
 #: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
+msgid "INSPECT FINDA"
+msgstr ""
+
+#. MSG_TITLE_INVALID_TOOL c=20
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:201
 msgid "INVALID TOOL"
 msgstr "OGILTIGT VERKTYG"
 
@@ -1061,16 +1066,16 @@ msgstr "Ladda alla"
 msgid "Load filament"
 msgstr "Ladda filament"
 
-#. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
-msgid "Load to extruder"
-msgstr "Ladd till extruder"
-
 #. MSG_LOAD_TO_NOZZLE c=18
 #: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Ladd till munstyck"
 
+#. MSG_LOADING_TEST c=18
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:4419
+msgid "Loading Test"
+msgstr ""
+
 #. MSG_LOADING_COLOR c=20
 #: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
@@ -2504,6 +2509,9 @@ msgstr "🔃Uppdatera"
 #~ msgid "Load all"
 #~ msgstr "Ladda alla"
 
+#~ msgid "Load to extruder"
+#~ msgstr "Ladd till extruder"
+
 #~ msgid "M117 First layer cal."
 #~ msgstr "M117 Först lager kalibr."