Merge pull request #1597 from mkbel/fix_compiler__warning

Fix compiler  warning

Firmware/Marlin.h

@@ -297,9 +297,14 @@ extern float min_pos[3];
 extern float max_pos[3];
 extern bool axis_known_position[3];
 extern int fanSpeed;
-extern void homeaxis(int axis, uint8_t cnt = 1, uint8_t* pstep = 0);
 extern int8_t lcd_change_fil_state;
 
+#ifdef TMC2130
+void homeaxis(int axis, uint8_t cnt = 1, uint8_t* pstep = 0);
+#else
+void homeaxis(int axis, uint8_t cnt = 1);
+#endif //TMC2130
+
 
 #ifdef FAN_SOFT_PWM
 extern unsigned char fanSpeedSoftPwm;
@@ -478,8 +483,6 @@ void force_high_power_mode(bool start_high_power_section);
 #endif //TMC2130
 
 // G-codes
-void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_y_value, bool home_z_axis, long home_z_value, bool calib, bool without_mbl);
-void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis);
 
 bool gcode_M45(bool onlyZ, int8_t verbosity_level);
 void gcode_M114();

Firmware/Marlin_main.cpp

@@ -407,6 +407,7 @@ static void get_arc_coordinates();
 static bool setTargetedHotend(int code, uint8_t &extruder);
 static void print_time_remaining_init();
 static void wait_for_heater(long codenum, uint8_t extruder);
+static void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis);
 
 uint16_t gcode_in_progress = 0;
 uint16_t mcode_in_progress = 0;
@@ -2126,7 +2127,11 @@ bool calibrate_z_auto()
 }
 #endif //TMC2130
 
+#ifdef TMC2130
 void homeaxis(int axis, uint8_t cnt, uint8_t* pstep)
+#else
+void homeaxis(int axis, uint8_t cnt)
+#endif //TMC2130
 {
 	bool endstops_enabled  = enable_endstops(true); //RP: endstops should be allways enabled durring homing
 #define HOMEAXIS_DO(LETTER) \
@@ -2435,11 +2440,12 @@ void force_high_power_mode(bool start_high_power_section) {
 }
 #endif //TMC2130
 
-void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis) {
-	gcode_G28(home_x_axis, 0, home_y_axis, 0, home_z_axis, 0, false, true);
-}
-
-void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_y_value, bool home_z_axis, long home_z_value, bool calib, bool without_mbl) {
+#ifdef TMC2130
+static void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_y_value, bool home_z_axis, long home_z_value, bool calib, bool without_mbl)
+#else
+static void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_y_value, bool home_z_axis, long home_z_value, bool without_mbl)
+#endif //TMC2130
+{
 	st_synchronize();
 
 #if 0
@@ -2724,6 +2730,15 @@ void gcode_G28(bool home_x_axis, long home_x_value, bool home_y_axis, long home_
 #endif
 }
 
+static void gcode_G28(bool home_x_axis, bool home_y_axis, bool home_z_axis)
+{
+#ifdef TMC2130
+    gcode_G28(home_x_axis, 0, home_y_axis, 0, home_z_axis, 0, false, true);
+#else
+    gcode_G28(home_x_axis, 0, home_y_axis, 0, home_z_axis, 0, true);
+#endif //TMC2130
+}
+
 void adjust_bed_reset()
 {
 	eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1);
@@ -3830,8 +3845,12 @@ if((eSoundMode==e_SOUND_MODE_LOUD)||(eSoundMode==e_SOUND_MODE_ONCE))
       home_z_value = code_value_long();
       bool without_mbl = code_seen('W');
       // calibrate?
+#ifdef TMC2130
       bool calib = code_seen('C');
       gcode_G28(home_x, home_x_value, home_y, home_y_value, home_z, home_z_value, calib, without_mbl);
+#else
+      gcode_G28(home_x, home_x_value, home_y, home_y_value, home_z, home_z_value, without_mbl);
+#endif //TMC2130
       if ((home_x || home_y || without_mbl || home_z) == false) {
          // Push the commands to the front of the message queue in the reverse order!
          // There shall be always enough space reserved for these commands.

Firmware/language.c

@@ -77,7 +77,7 @@ uint8_t lang_select(uint8_t lang)
 			if (lang_check(table))
 				if (pgm_read_dword(((uint32_t*)(table + 12))) == pgm_read_dword(((uint32_t*)(_PRI_LANG_SIGNATURE)))) //signature valid
 				{
-					lang_table = table; // set table pointer
+					lang_table = (lang_table_t*)table; // set table pointer
 					lang_selected = lang; // set language id
 				}
 		}
@@ -157,7 +157,7 @@ uint8_t lang_get_header(uint8_t lang, lang_table_header_t* header, uint32_t* off
 	if (lang == LANG_ID_SEC)
 	{
 		uint16_t ui = _SEC_LANG_TABLE; //table pointer
-		memcpy_P(header, ui, sizeof(lang_table_header_t)); //read table header from progmem
+		memcpy_P(header, (lang_table_header_t*)ui, sizeof(lang_table_header_t)); //read table header from progmem
 		if (offset) *offset = ui;
 		return (header->magic == LANG_MAGIC)?1:0; //return 1 if magic valid
 	}

Firmware/pins.h

@@ -3,20 +3,6 @@
 
 #include "boards.h"
 
-#if !MB(5DPRINT)
-#define X_MS1_PIN -1
-#define X_MS2_PIN -1
-#define Y_MS1_PIN -1
-#define Y_MS2_PIN -1
-#define Z_MS1_PIN -1
-#define Z_MS2_PIN -1
-#define E0_MS1_PIN -1
-#define E0_MS2_PIN -1
-#define E1_MS1_PIN -1
-#define E1_MS2_PIN -1
-#define DIGIPOTSS_PIN -1
-#endif
-
 #define LARGE_FLASH true
 
 /*****************************************************************

Firmware/stepper.cpp

@@ -92,10 +92,15 @@ bool abort_on_endstop_hit = false;
   int motor_current_setting_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
 #endif
 
-static bool old_x_min_endstop=false;
+#if ( (defined(X_MAX_PIN) && (X_MAX_PIN > -1)) || defined(TMC2130_SG_HOMING) ) && !defined(DEBUG_DISABLE_XMAXLIMIT)
 static bool old_x_max_endstop=false;
-static bool old_y_min_endstop=false;
+#endif
+#if ( (defined(Y_MAX_PIN) && (Y_MAX_PIN > -1)) || defined(TMC2130_SG_HOMING) ) && !defined(DEBUG_DISABLE_YMAXLIMIT)
 static bool old_y_max_endstop=false;
+#endif
+
+static bool old_x_min_endstop=false;
+static bool old_y_min_endstop=false;
 static bool old_z_min_endstop=false;
 static bool old_z_max_endstop=false;
 

Firmware/ultralcd.cpp

@@ -3518,7 +3518,6 @@ bool lcd_calibrate_z_end_stop_manual(bool only_z)
 
     // Until confirmed by the confirmation dialog.
     for (;;) {
-        unsigned long previous_millis_cmd = _millis();
         const char   *msg                 = only_z ? _i("Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.") : _i("Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.");////MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8////MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
         const char   *msg_next            = lcd_display_message_fullscreen_P(msg);
         const bool    multi_screen        = msg_next != NULL;
@@ -3527,13 +3526,10 @@ bool lcd_calibrate_z_end_stop_manual(bool only_z)
         lcd_encoder_diff = 0;
         lcd_encoder = 0;
         for (;;) {
-//          if (_millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS)
-//             goto canceled;
             manage_heater();
             manage_inactivity(true);
             if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) {
                 _delay(50);
-                previous_millis_cmd = _millis();
                 lcd_encoder += abs(lcd_encoder_diff / ENCODER_PULSES_PER_STEP);
                 lcd_encoder_diff = 0;
                 if (! planner_queue_full()) {
@@ -5422,10 +5418,9 @@ static void lcd_ustep_linearity_menu_save()
 }
 #endif //TMC2130
 
-
+#ifdef TMC2130
 static void lcd_settings_linearity_correction_menu_save()
 {
-#ifdef TMC2130
     bool changed = false;
     if (tmc2130_wave_fac[X_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[X_AXIS] = 0;
     if (tmc2130_wave_fac[Y_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Y_AXIS] = 0;
@@ -5437,9 +5432,8 @@ static void lcd_settings_linearity_correction_menu_save()
     changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC) != tmc2130_wave_fac[E_AXIS]);
     lcd_ustep_linearity_menu_save();
     if (changed) tmc2130_init();
-#endif //TMC2130
 }
-
+#endif //TMC2130
 
 static void lcd_calibration_menu()
 {
@@ -6826,8 +6820,7 @@ bool lcd_selftest()
 		_result = lcd_selftest_manual_fan_check(1, false);
 		if (!_result)
 		{			
-			const char *_err;
-			lcd_selftest_error(6, _err, _err); //print fan not spinning
+			lcd_selftest_error(6, 0, 0); //print fan not spinning
 		}
 
 #endif //defined(TACH_1)