Bump Z feedrate

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -83,7 +83,7 @@
 #define Z_PAUSE_LIFT 20
 
 #define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
-#define HOMING_FEEDRATE {3000, 3000, 800, 0}  // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
+#define HOMING_FEEDRATE {3000, 3000, 1200, 0}  // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
 
 //#define DEFAULT_Y_OFFSET    4.f // Default distance of Y_MIN_POS point from endstop, when the printer is not calibrated.
 /**
@@ -95,8 +95,8 @@
  */
 #define SHEET_PRINT_ZERO_REF_Y -2.f
 
-#define DEFAULT_MAX_FEEDRATE                {200, 200, 12, 60}      // (mm/sec)   max feedrate (M203)
-#define DEFAULT_MAX_FEEDRATE_SILENT         {100, 100, 12, 60}      // (mm/sec)   max feedrate (M203), silent mode
+#define DEFAULT_MAX_FEEDRATE                {200, 200, 25, 60}      // (mm/sec)   max feedrate (M203)
+#define DEFAULT_MAX_FEEDRATE_SILENT         {100, 100, 25, 60}      // (mm/sec)   max feedrate (M203), silent mode
 
 #define DEFAULT_MAX_ACCELERATION            {1000, 1000, 200, 5000}  // (mm/sec^2) max acceleration (M201)
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
@@ -106,7 +106,7 @@
 #define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
 #define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
-#define MANUAL_FEEDRATE {2700, 2700, 1000, 60}   // set the speeds for manual moves (mm/min)
+#define MANUAL_FEEDRATE {2700, 2700, 1500, 60}   // set the speeds for manual moves (mm/min)
 
 //Silent mode limits
 #define SILENT_MAX_ACCEL_XY      960ul  // max acceleration in silent mode in mm/s^2