LiquidCrystal class renamed to LiquidCrystal_Prusa

Firmware/Configuration.h

@@ -690,7 +690,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 
 //#define LCD_I2C_SAINSMART_YWROBOT
 #ifdef LCD_I2C_SAINSMART_YWROBOT
-  // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home )
+  // This uses the LiquidCrystal_I2C library ( https://bitbucket.org/fmalpartida/new-LiquidCrystal_Prusa/wiki/Home )
   // Make sure it is placed in the Arduino libraries directory.
   #define LCD_I2C_TYPE_PCF8575
   #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
@@ -745,7 +745,7 @@ const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of
 // Shift register panels
 // ---------------------
 // 2 wire Non-latching LCD SR from:
-// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection 
+// https://bitbucket.org/fmalpartida/new-LiquidCrystal_Prusa/wiki/schematics#!shiftregister-connection 
 
 //#define SAV_3DLCD
 #ifdef SAV_3DLCD

Firmware/Firmware.ino

@@ -43,7 +43,7 @@
   #elif defined(DOGLCD)
     #include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
   #else
-    #include "LiquidCrystal.h" // library for character LCD
+    #include "LiquidCrystal_Prusa.h" // library for character LCD
   #endif
 #endif
 

Firmware/LiquidCrystal.cpp

@@ -1,4 +1,4 @@
-#include "LiquidCrystal.h"
+#include "LiquidCrystal_Prusa.h"
 
 #include <stdio.h>
 #include <string.h>
@@ -22,35 +22,35 @@
 //
 // Note, however, that resetting the Arduino doesn't reset the LCD, so we
 // can't assume that it's in that state when a sketch starts (and the
-// LiquidCrystal constructor is called).
+// LiquidCrystal_Prusa constructor is called).
 
-LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+LiquidCrystal_Prusa::LiquidCrystal_Prusa(uint8_t rs, uint8_t rw, uint8_t enable,
 			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
 			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
 {
   init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
 }
 
-LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t enable,
+LiquidCrystal_Prusa::LiquidCrystal_Prusa(uint8_t rs, uint8_t enable,
 			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
 			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
 {
   init(0, rs, 255, enable, d0, d1, d2, d3, d4, d5, d6, d7);
 }
 
-LiquidCrystal::LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+LiquidCrystal_Prusa::LiquidCrystal_Prusa(uint8_t rs, uint8_t rw, uint8_t enable,
 			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
 {
   init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
 }
 
-LiquidCrystal::LiquidCrystal(uint8_t rs,  uint8_t enable,
+LiquidCrystal_Prusa::LiquidCrystal_Prusa(uint8_t rs,  uint8_t enable,
 			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
 {
   init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
 }
 
-void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
+void LiquidCrystal_Prusa::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
 			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
 			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
 {
@@ -82,7 +82,7 @@ void LiquidCrystal::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t en
   begin(16, 1);  
 }
 
-void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
+void LiquidCrystal_Prusa::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
   if (lines > 1) {
     _displayfunction |= LCD_2LINE;
   }
@@ -162,7 +162,7 @@ void LiquidCrystal::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
 
 
 
-void LiquidCrystal::begin_noclear(uint8_t cols, uint8_t lines, uint8_t dotsize) {
+void LiquidCrystal_Prusa::begin_noclear(uint8_t cols, uint8_t lines, uint8_t dotsize) {
   if (lines > 1) {
     _displayfunction |= LCD_2LINE;
   }
@@ -253,21 +253,21 @@ void LiquidCrystal::begin_noclear(uint8_t cols, uint8_t lines, uint8_t dotsize)
 
 
 /********** high level commands, for the user! */
-void LiquidCrystal::clear()
+void LiquidCrystal_Prusa::clear()
 {
   command(LCD_CLEARDISPLAY);  // clear display, set cursor position to zero
   delayMicroseconds(1600);  // this command takes a long time
   
 }
 
-void LiquidCrystal::home()
+void LiquidCrystal_Prusa::home()
 {
   command(LCD_RETURNHOME);  // set cursor position to zero
   delayMicroseconds(1600);  // this command takes a long time!
   
 }
 
-void LiquidCrystal::setCursor(uint8_t col, uint8_t row)
+void LiquidCrystal_Prusa::setCursor(uint8_t col, uint8_t row)
 {
   int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
   if ( row >= _numlines ) {
@@ -278,70 +278,70 @@ void LiquidCrystal::setCursor(uint8_t col, uint8_t row)
 }
 
 // Turn the display on/off (quickly)
-void LiquidCrystal::noDisplay() {
+void LiquidCrystal_Prusa::noDisplay() {
   _displaycontrol &= ~LCD_DISPLAYON;
   command(LCD_DISPLAYCONTROL | _displaycontrol);
 }
-void LiquidCrystal::display() {
+void LiquidCrystal_Prusa::display() {
   _displaycontrol |= LCD_DISPLAYON;
   command(LCD_DISPLAYCONTROL | _displaycontrol);
 }
 
 // Turns the underline cursor on/off
-void LiquidCrystal::noCursor() {
+void LiquidCrystal_Prusa::noCursor() {
   _displaycontrol &= ~LCD_CURSORON;
   command(LCD_DISPLAYCONTROL | _displaycontrol);
 }
-void LiquidCrystal::cursor() {
+void LiquidCrystal_Prusa::cursor() {
   _displaycontrol |= LCD_CURSORON;
   command(LCD_DISPLAYCONTROL | _displaycontrol);
 }
 
 // Turn on and off the blinking cursor
-void LiquidCrystal::noBlink() {
+void LiquidCrystal_Prusa::noBlink() {
   _displaycontrol &= ~LCD_BLINKON;
   command(LCD_DISPLAYCONTROL | _displaycontrol);
 }
-void LiquidCrystal::blink() {
+void LiquidCrystal_Prusa::blink() {
   _displaycontrol |= LCD_BLINKON;
   command(LCD_DISPLAYCONTROL | _displaycontrol);
 }
 
 // These commands scroll the display without changing the RAM
-void LiquidCrystal::scrollDisplayLeft(void) {
+void LiquidCrystal_Prusa::scrollDisplayLeft(void) {
   command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
 }
-void LiquidCrystal::scrollDisplayRight(void) {
+void LiquidCrystal_Prusa::scrollDisplayRight(void) {
   command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
 }
 
 // This is for text that flows Left to Right
-void LiquidCrystal::leftToRight(void) {
+void LiquidCrystal_Prusa::leftToRight(void) {
   _displaymode |= LCD_ENTRYLEFT;
   command(LCD_ENTRYMODESET | _displaymode);
 }
 
 // This is for text that flows Right to Left
-void LiquidCrystal::rightToLeft(void) {
+void LiquidCrystal_Prusa::rightToLeft(void) {
   _displaymode &= ~LCD_ENTRYLEFT;
   command(LCD_ENTRYMODESET | _displaymode);
 }
 
 // This will 'right justify' text from the cursor
-void LiquidCrystal::autoscroll(void) {
+void LiquidCrystal_Prusa::autoscroll(void) {
   _displaymode |= LCD_ENTRYSHIFTINCREMENT;
   command(LCD_ENTRYMODESET | _displaymode);
 }
 
 // This will 'left justify' text from the cursor
-void LiquidCrystal::noAutoscroll(void) {
+void LiquidCrystal_Prusa::noAutoscroll(void) {
   _displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
   command(LCD_ENTRYMODESET | _displaymode);
 }
 
 // Allows us to fill the first 8 CGRAM locations
 // with custom characters
-void LiquidCrystal::createChar(uint8_t location, uint8_t charmap[]) {
+void LiquidCrystal_Prusa::createChar(uint8_t location, uint8_t charmap[]) {
   location &= 0x7; // we only have 8 locations 0-7
   command(LCD_SETCGRAMADDR | (location << 3));
   for (int i=0; i<8; i++) {
@@ -351,11 +351,11 @@ void LiquidCrystal::createChar(uint8_t location, uint8_t charmap[]) {
 
 /*********** mid level commands, for sending data/cmds */
 
-inline void LiquidCrystal::command(uint8_t value) {
+inline void LiquidCrystal_Prusa::command(uint8_t value) {
   send(value, LOW);
 }
 
-inline size_t LiquidCrystal::write(uint8_t value) {
+inline size_t LiquidCrystal_Prusa::write(uint8_t value) {
   if (_escape[0] || (value == 0x1b))
     return escape_write(value);
   send(value, HIGH);
@@ -368,7 +368,7 @@ inline size_t LiquidCrystal::write(uint8_t value) {
 //CursorShow   "\x1b[?25h"
 //CursorHide   "\x1b[?25l"
 
-inline size_t LiquidCrystal::escape_write(uint8_t chr)
+inline size_t LiquidCrystal_Prusa::escape_write(uint8_t chr)
 {
 #define escape_cnt (_escape[0])        //escape character counter
 #define is_num_msk (_escape[1])        //numeric character bit mask
@@ -502,7 +502,7 @@ end:
 /************ low level data pushing commands **********/
 
 // write either command or data, with automatic 4/8-bit selection
-void LiquidCrystal::send(uint8_t value, uint8_t mode) {
+void LiquidCrystal_Prusa::send(uint8_t value, uint8_t mode) {
   digitalWrite(_rs_pin, mode);
 
   // if there is a RW pin indicated, set it low to Write
@@ -518,7 +518,7 @@ void LiquidCrystal::send(uint8_t value, uint8_t mode) {
   }
 }
 
-void LiquidCrystal::pulseEnable(void) {
+void LiquidCrystal_Prusa::pulseEnable(void) {
   digitalWrite(_enable_pin, LOW);
   delayMicroseconds(1);    
   digitalWrite(_enable_pin, HIGH);
@@ -527,7 +527,7 @@ void LiquidCrystal::pulseEnable(void) {
   delayMicroseconds(100);   // commands need > 37us to settle
 }
 
-void LiquidCrystal::write4bits(uint8_t value) {
+void LiquidCrystal_Prusa::write4bits(uint8_t value) {
   for (int i = 0; i < 4; i++) {
     pinMode(_data_pins[i], OUTPUT);
     digitalWrite(_data_pins[i], (value >> i) & 0x01);
@@ -536,7 +536,7 @@ void LiquidCrystal::write4bits(uint8_t value) {
   pulseEnable();
 }
 
-void LiquidCrystal::write8bits(uint8_t value) {
+void LiquidCrystal_Prusa::write8bits(uint8_t value) {
   for (int i = 0; i < 8; i++) {
     pinMode(_data_pins[i], OUTPUT);
     digitalWrite(_data_pins[i], (value >> i) & 0x01);

Firmware/LiquidCrystal.h

@@ -1,5 +1,5 @@
-#ifndef LiquidCrystal_h
-#define LiquidCrystal_h
+#ifndef LiquidCrystal_Prusa_h
+#define LiquidCrystal_Prusa_h
 
 #include <inttypes.h>
 #include "Print.h"
@@ -42,17 +42,17 @@
 #define LCD_5x10DOTS 0x04
 #define LCD_5x8DOTS 0x00
 
-class LiquidCrystal : public Print {
+class LiquidCrystal_Prusa : public Print {
 public:
-  LiquidCrystal(uint8_t rs, uint8_t enable,
+  LiquidCrystal_Prusa(uint8_t rs, uint8_t enable,
 		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
 		uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
-  LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+  LiquidCrystal_Prusa(uint8_t rs, uint8_t rw, uint8_t enable,
 		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
 		uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
-  LiquidCrystal(uint8_t rs, uint8_t rw, uint8_t enable,
+  LiquidCrystal_Prusa(uint8_t rs, uint8_t rw, uint8_t enable,
 		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
-  LiquidCrystal(uint8_t rs, uint8_t enable,
+  LiquidCrystal_Prusa(uint8_t rs, uint8_t enable,
 		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
 
   void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,

Firmware/Marlin_main.cpp

@@ -810,8 +810,8 @@ void factory_reset(char level, bool quiet)
     
 
 }
-#include "LiquidCrystal.h"
-extern LiquidCrystal lcd;
+#include "LiquidCrystal_Prusa.h"
+extern LiquidCrystal_Prusa lcd;
 
 FILE _lcdout = {0};
 

Firmware/dogm_lcd_implementation.h

@@ -42,11 +42,11 @@
 /* Russian language not supported yet, needs custom font
 
 #ifdef LANGUAGE_RU
-#include "LiquidCrystalRus.h"
-#define LCD_CLASS LiquidCrystalRus
+#include "LiquidCrystal_Rus.h"
+#define LCD_CLASS LiquidCrystal_Rus
 #else
-#include <LiquidCrystal.h>
-#define LCD_CLASS LiquidCrystal
+#include <LiquidCrystal_Prusa.h>
+#define LCD_CLASS LiquidCrystal_Prusa
 #endif
 */
 

Firmware/fsensor.cpp

@@ -9,8 +9,8 @@
 #include "fastio.h"
 #include "cmdqueue.h"
 
-//#include "LiquidCrystal.h"
-//extern LiquidCrystal lcd;
+//#include "LiquidCrystal_Prusa.h"
+//extern LiquidCrystal_Prusa lcd;
 
 
 #define FSENSOR_ERR_MAX          5  //filament sensor max error count

Firmware/tmc2130.cpp

@@ -3,7 +3,7 @@
 #ifdef TMC2130
 
 #include "tmc2130.h"
-#include "LiquidCrystal.h"
+#include "LiquidCrystal_Prusa.h"
 #include "ultralcd.h"
 #ifndef NEW_SPI
 #include <SPI.h>
@@ -12,7 +12,7 @@
 #endif //NEW_SPI
 
 
-extern LiquidCrystal lcd;
+extern LiquidCrystal_Prusa lcd;
 
 #define TMC2130_GCONF_NORMAL 0x00000000 // spreadCycle
 #define TMC2130_GCONF_SGSENS 0x00003180 // spreadCycle with stallguard (stall activates DIAG0 and DIAG1 [pushpull])

Firmware/ultralcd_implementation_hitachi_HD44780.h

@@ -194,7 +194,7 @@ extern volatile uint16_t buttons;  //an extended version of the last checked but
     LCD_CLASS lcd(LCD_I2C_ADDRESS, LCD_WIDTH, LCD_HEIGHT);
     
 // 2 wire Non-latching LCD SR from:
-// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection 
+// https://bitbucket.org/fmalpartida/new-LiquidCrystal_Prusa/wiki/schematics#!shiftregister-connection 
 #elif defined(SR_LCD_2W_NL)
 
   extern "C" void __cxa_pure_virtual() { while (1); }
@@ -206,11 +206,11 @@ extern volatile uint16_t buttons;  //an extended version of the last checked but
 #else
   // Standard directly connected LCD implementations
   #ifdef LANGUAGE_RU
-    #include "LiquidCrystalRus.h"
-    #define LCD_CLASS LiquidCrystalRus
+    #include "LiquidCrystal_Rus.h"
+    #define LCD_CLASS LiquidCrystal_Rus
   #else 
-    #include "LiquidCrystal.h"
-    #define LCD_CLASS LiquidCrystal
+    #include "LiquidCrystal_Prusa.h"
+    #define LCD_CLASS LiquidCrystal_Prusa
   #endif  
   LCD_CLASS lcd(LCD_PINS_RS, LCD_PINS_ENABLE, LCD_PINS_D4, LCD_PINS_D5,LCD_PINS_D6,LCD_PINS_D7);  //RS,Enable,D4,D5,D6,D7
 #endif