fixed #761 from hzapper (#elif instead of #else if)

Firmware/sm4.c

@@ -53,7 +53,7 @@ uint8_t sm4_get_dir(uint8_t axis)
 	case 1: return (PORTL & 1)?0:1;
 	case 2: return (PORTL & 4)?0:1;
 	case 3: return (PORTL & 64)?1:0;
-#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
+#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
 	case 0: return (PORTL & 1)?1:0;
 	case 1: return (PORTL & 2)?0:1;
 	case 2: return (PORTL & 4)?1:0;
@@ -72,7 +72,7 @@ void sm4_set_dir(uint8_t axis, uint8_t dir)
 	case 1: if (!dir) PORTL |= 1; else PORTL &= ~1; break;
 	case 2: if (!dir) PORTL |= 4; else PORTL &= ~4; break;
 	case 3: if (dir) PORTL |= 64; else PORTL &= ~64; break;
-#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
+#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
 	case 0: if (dir) PORTL |= 1; else PORTL &= ~1; break;
 	case 1: if (!dir) PORTL |= 2; else PORTL &= ~2; break;
 	case 2: if (dir) PORTL |= 4; else PORTL &= ~4; break;
@@ -93,7 +93,7 @@ uint8_t sm4_get_dir_bits(void)
 	if (portL & 4) dir_bits |= 4;
 	if (portL & 64) dir_bits |= 8;
 	dir_bits ^= 0x07; //invert XYZ, do not invert E
-#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
+#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
 	if (portL & 1) dir_bits |= 1;
 	if (portL & 2) dir_bits |= 2;
 	if (portL & 4) dir_bits |= 4;
@@ -114,7 +114,7 @@ void sm4_set_dir_bits(uint8_t dir_bits)
 	if (dir_bits & 2) portL |= 1;  //set Y direction bit
 	if (dir_bits & 4) portL |= 4;  //set Z direction bit
 	if (dir_bits & 8) portL |= 64; //set E direction bit
-#else if ((MOTHERBOARD == BOARD_EINSY_1_0a))
+#elif ((MOTHERBOARD == BOARD_EINSY_1_0a))
 	dir_bits ^= 0x0a; //invert YE, do not invert XZ
 	if (dir_bits & 1) portL |= 1;  //set X direction bit
 	if (dir_bits & 2) portL |= 2;  //set Y direction bit

Firmware/ultralcd.cpp

@@ -1649,7 +1649,7 @@ static void lcd_menu_fails_stats()
 	MENU_ITEM(submenu, PSTR("Total"), lcd_menu_fails_stats_total);
 	END_MENU();
 }
-#else if defined(PAT9125)
+#elif defined(PAT9125)
 /**
  * @brief Print last print and total filament run outs
  *