Do not port print fan preheat speed preset, as it was never used. And it was broken until recently fixed when adding ASA profile.

Firmware/ultralcd.cpp

@@ -1669,7 +1669,6 @@ static void lcd_preheat_pla()
 {
   setTargetHotend0(PLA_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(PLA_PREHEAT_HPB_TEMP);
-  fanSpeed = PLA_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);
@@ -1679,7 +1678,6 @@ static void lcd_preheat_asa()
 {
   setTargetHotend0(ASA_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(ASA_PREHEAT_HPB_TEMP);
-  fanSpeed = ASA_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);
@@ -1689,7 +1687,6 @@ static void lcd_preheat_abs()
 {
   setTargetHotend0(ABS_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(ABS_PREHEAT_HPB_TEMP);
-  fanSpeed = ABS_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);
@@ -1699,7 +1696,6 @@ static void lcd_preheat_pp()
 {
   setTargetHotend0(PP_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(PP_PREHEAT_HPB_TEMP);
-  fanSpeed = PP_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);
@@ -1709,7 +1705,6 @@ static void lcd_preheat_pet()
 {
   setTargetHotend0(PET_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(PET_PREHEAT_HPB_TEMP);
-  fanSpeed = PET_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);
@@ -1719,7 +1714,6 @@ static void lcd_preheat_hips()
 {
   setTargetHotend0(HIPS_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(HIPS_PREHEAT_HPB_TEMP);
-  fanSpeed = HIPS_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);
@@ -1729,7 +1723,6 @@ static void lcd_preheat_flex()
 {
   setTargetHotend0(FLEX_PREHEAT_HOTEND_TEMP);
   if (!wizard_active) setTargetBed(FLEX_PREHEAT_HPB_TEMP);
-  fanSpeed = FLEX_PREHEAT_FAN_SPEED;
   lcd_return_to_status();
   setWatch(); // heater sanity check timer
   if (wizard_active) lcd_wizard(WizState::Unload);

Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h

@@ -319,35 +319,27 @@ PREHEAT SETTINGS
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 55
-#define PLA_PREHEAT_FAN_SPEED 0  
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0 
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0 
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0 
 
 #define PET_PREHEAT_HOTEND_TEMP 240
 #define PET_PREHEAT_HPB_TEMP 90
-#define PET_PREHEAT_FAN_SPEED 0 
 
 #define FLEX_PREHEAT_HOTEND_TEMP 230
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0 
 
 /*------------------------------------
 THERMISTORS SETTINGS

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -377,35 +377,27 @@
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
-#define PLA_PREHEAT_FAN_SPEED 0
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0
 
 #define PET_PREHEAT_HOTEND_TEMP 230
 #define PET_PREHEAT_HPB_TEMP 85
-#define PET_PREHEAT_FAN_SPEED 0
 
 #define FLEX_PREHEAT_HOTEND_TEMP 240
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0
 
 /*------------------------------------
  THERMISTORS SETTINGS

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -378,35 +378,27 @@
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
-#define PLA_PREHEAT_FAN_SPEED 0
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0
 
 #define PET_PREHEAT_HOTEND_TEMP 230
 #define PET_PREHEAT_HPB_TEMP 85
-#define PET_PREHEAT_FAN_SPEED 0
 
 #define FLEX_PREHEAT_HOTEND_TEMP 240
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0
 
 /*------------------------------------
  THERMISTORS SETTINGS

Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h

@@ -377,35 +377,27 @@
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
-#define PLA_PREHEAT_FAN_SPEED 0
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0
 
 #define PET_PREHEAT_HOTEND_TEMP 230
 #define PET_PREHEAT_HPB_TEMP 85
-#define PET_PREHEAT_FAN_SPEED 0
 
 #define FLEX_PREHEAT_HOTEND_TEMP 240
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0
 
 /*------------------------------------
  THERMISTORS SETTINGS

Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h

@@ -378,35 +378,27 @@
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
-#define PLA_PREHEAT_FAN_SPEED 0
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0
 
 #define PET_PREHEAT_HOTEND_TEMP 230
 #define PET_PREHEAT_HPB_TEMP 85
-#define PET_PREHEAT_FAN_SPEED 0
 
 #define FLEX_PREHEAT_HOTEND_TEMP 240
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0
 
 /*------------------------------------
  THERMISTORS SETTINGS

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -487,35 +487,27 @@
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
-#define PLA_PREHEAT_FAN_SPEED 0
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0
 
 #define PET_PREHEAT_HOTEND_TEMP 230
 #define PET_PREHEAT_HPB_TEMP 85
-#define PET_PREHEAT_FAN_SPEED 0
 
 #define FLEX_PREHEAT_HOTEND_TEMP 240
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0
 
 /*------------------------------------
  THERMISTORS SETTINGS

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -489,35 +489,27 @@
 
 #define FARM_PREHEAT_HOTEND_TEMP 250
 #define FARM_PREHEAT_HPB_TEMP 80
-#define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
-#define PLA_PREHEAT_FAN_SPEED 0
 
 #define ASA_PREHEAT_HOTEND_TEMP 260
 #define ASA_PREHEAT_HPB_TEMP 105
-#define ASA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255
 #define ABS_PREHEAT_HPB_TEMP 100
-#define ABS_PREHEAT_FAN_SPEED 0
 
 #define HIPS_PREHEAT_HOTEND_TEMP 220
 #define HIPS_PREHEAT_HPB_TEMP 100
-#define HIPS_PREHEAT_FAN_SPEED 0
 
 #define PP_PREHEAT_HOTEND_TEMP 254
 #define PP_PREHEAT_HPB_TEMP 100
-#define PP_PREHEAT_FAN_SPEED 0
 
 #define PET_PREHEAT_HOTEND_TEMP 230
 #define PET_PREHEAT_HPB_TEMP 85
-#define PET_PREHEAT_FAN_SPEED 0
 
 #define FLEX_PREHEAT_HOTEND_TEMP 240
 #define FLEX_PREHEAT_HPB_TEMP 50
-#define FLEX_PREHEAT_FAN_SPEED 0
 
 /*------------------------------------
  THERMISTORS SETTINGS