Add DEFAULT_TRAVEL_ACCELERATION in all variants

Use the same value as DEFAULT_ACCELERATION for compatibility.

Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h

@@ -90,8 +90,9 @@ AXIS SETTINGS
 #define DEFAULT_MAX_ACCELERATION      {9000,9000,500,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
-#define DEFAULT_ACCELERATION          1500    // X, Y, Z and E max acceleration in mm/s^2 for printing moves
+#define DEFAULT_ACCELERATION          1500   // X, Y, Z and E max acceleration in mm/s^2 for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  1500   // X, Y, Z and E max acceleration in mm/s^2 for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   1500   // X, Y, Z and E max acceleration in mm/s^2 for travels
 
 
 #define MANUAL_FEEDRATE {3000, 3000, 1000, 100}   // set the speeds for manual moves (mm/min)

Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h

@@ -90,8 +90,9 @@ AXIS SETTINGS
 #define DEFAULT_MAX_ACCELERATION      {9000,9000,500,10000}    // X, Y, Z, E maximum start speed for accelerated moves. E default values are good for Skeinforge 40+, for older versions raise them a lot.
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
-#define DEFAULT_ACCELERATION          1500    // X, Y, Z and E max acceleration in mm/s^2 for printing moves
+#define DEFAULT_ACCELERATION          1500   // X, Y, Z and E max acceleration in mm/s^2 for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  1500   // X, Y, Z and E max acceleration in mm/s^2 for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   1500   // X, Y, Z and E max acceleration in mm/s^2 for travels
 
 
 #define MANUAL_FEEDRATE {3000, 3000, 1000, 100}   // set the speeds for manual moves (mm/min)

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -94,8 +94,9 @@
 #define DEFAULT_MAX_ACCELERATION      {1000, 1000, 200, 5000}  // (mm/sec^2) max acceleration (M201)
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
-#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
-#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -95,8 +95,9 @@
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
 
-#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
-#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 

Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h

@@ -94,8 +94,9 @@
 #define DEFAULT_MAX_ACCELERATION      {1000, 1000, 200, 5000}  // (mm/sec^2) max acceleration (M201)
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
-#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
-#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 

Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h

@@ -95,8 +95,9 @@
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
 
-#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
-#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -99,8 +99,9 @@
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
 
-#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
-#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -101,8 +101,9 @@
 #define DEFAULT_MAX_ACCELERATION_SILENT     {960, 960, 200, 5000}    // (mm/sec^2) max acceleration (M201), silent mode
 
 
-#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204S)
-#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204T)
+#define DEFAULT_ACCELERATION          1250   // X, Y, Z and E max acceleration in mm/s^2 for printing moves (M204P)
+#define DEFAULT_RETRACT_ACCELERATION  1250   // X, Y, Z and E max acceleration in mm/s^2 for retracts (M204R)
+#define DEFAULT_TRAVEL_ACCELERATION   1250   // X, Y, Z and E max acceleration in mm/s^2 for travels (M204T)
 
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)