EEPROM address conflict fix; forcing selftest can happen only in case that we have TMC2130 drivers

Firmware/Configuration.h

@@ -7,7 +7,7 @@
 #define STR(x) STR_HELPER(x)
 
 // Firmware version
-#define FW_VERSION "3.2.0-RC1"
+#define FW_VERSION "3.2.0-RC2"
 #define FW_COMMIT_NR   461
 // FW_VERSION_UNKNOWN means this is an unofficial build.
 // The firmware should only be checked into github with this symbol.
@@ -132,10 +132,6 @@
 // Power loss errors (total)
 #define EEPROM_POWER_COUNT_TOT       (EEPROM_FERROR_COUNT_TOT - 2)             // uint16
 
-#define EEPROM_PRINTER_TYPE          (EEPROM_POWER_COUNT_TOT - 2)              // uint16
-#define EEPROM_BOARD_TYPE            (EEPROM_PRINTER_TYPE - 2)                 // uint16
-
-
 ////////////////////////////////////////
 // TMC2130 Accurate sensorless homing 
 
@@ -174,6 +170,8 @@
 #define EEPROM_TMC2130_Z_MRES              (EEPROM_TMC2130_Y_MRES - 1)                         // uint8
 #define EEPROM_TMC2130_E_MRES              (EEPROM_TMC2130_Z_MRES - 1)                         // uint8
 
+#define EEPROM_PRINTER_TYPE          (EEPROM_TMC2130_E_MRES - 2)                               // uint16
+#define EEPROM_BOARD_TYPE            (EEPROM_PRINTER_TYPE - 2)                                 // uint16
 
 //TMC2130 configuration
 #define EEPROM_TMC_AXIS_SIZE  //axis configuration block size

Firmware/Marlin_main.cpp

@@ -1336,7 +1336,8 @@ void setup()
   }
   if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 0) { //dont show calibration status messages if wizard is currently active
 	  if (calibration_status() == CALIBRATION_STATUS_ASSEMBLED ||
-		  calibration_status() == CALIBRATION_STATUS_UNKNOWN) {
+		  calibration_status() == CALIBRATION_STATUS_UNKNOWN || 
+		  calibration_status() == CALIBRATION_STATUS_XYZ_CALIBRATION) {
 		  // Reset the babystepping values, so the printer will not move the Z axis up when the babystepping is enabled.
 		  eeprom_update_word((uint16_t*)EEPROM_BABYSTEP_Z, 0);
 		  // Show the message.
@@ -1357,13 +1358,13 @@ void setup()
 	  }
   }
 
-#ifndef DEBUG_DISABLE_FORCE_SELFTEST
-  if (force_selftest_if_fw_version() && calibration_status() < CALIBRATION_STATUS_ASSEMBLED ) {
+#if !defined (DEBUG_DISABLE_FORCE_SELFTEST) && defined (TMC2130)
+  if (force_selftest_if_fw_version() && calibration_status() < CALIBRATION_STATUS_ASSEMBLED) {
 	  lcd_show_fullscreen_message_and_wait_P(MSG_FORCE_SELFTEST);
 	  update_current_firmware_version_to_eeprom();
 	  lcd_selftest();
   }
-#endif //DEBUG_DISABLE_FORCE_SELFTEST
+#endif //TMC2130 && !DEBUG_DISABLE_FORCE_SELFTEST
 
   KEEPALIVE_STATE(IN_PROCESS);
 #endif //DEBUG_DISABLE_STARTMSGS

Firmware/util.cpp

@@ -260,6 +260,10 @@ bool force_selftest_if_fw_version()
 		else if (ver_with_calibration[i] < ver_eeprom[i])
 			break;
 	}
+
+	//force selftest also in case that version used before flashing new firmware was 3.2.0-RC1
+	if ((ver_eeprom[0] == 3) && (ver_eeprom[1] == 2) && (ver_eeprom[2] == 0) && (ver_eeprom[3] == 3)) force_selftest = true;
+	
 	return force_selftest;
 }