Gcode tests for LA 1.5

LinearAdvanceTest/Linear Advance 1.5 ColorfabbHT Test Pattern.gcode

@@ -0,0 +1,194 @@
+; ### Marlin K-Factor Calibration Pattern ###
+; -------------------------------------------
+; Generated from https://marlinfw.org/tools/lin_advance/k-factor.html
+; Ref: https://marlinfw.org/docs/features/lin_advance.html
+; Ref: https://help.prusa3d.com/en/article/linear-advance_2252/
+;
+; Printer: PrusaMK3S
+; Filament: PETG
+; Created: Sat May 09 2020 20:56:51 GMT-0700 (Pacific Daylight Time)
+;
+; Settings Printer:
+; Filament Diameter = 1.75 mm
+; Nozzle Diameter = 0.4 mm
+; Nozzle Temperature = 300 °C
+; Bed Temperature = 100 °C
+; Retraction Distance = 0.8 mm
+; Layer Height = 0.2 mm
+; Z-axis Offset = 0 mm
+;
+; Settings Print Bed:
+; Bed Shape = Rect
+; Bed Size X = 250 mm
+; Bed Size Y = 210 mm
+; Origin Bed Center = false
+;
+; Settings Speed:
+; Slow Printing Speed = 1200 mm/min
+; Fast Printing Speed = 4200 mm/min
+; Movement Speed = 7200 mm/min
+; Retract Speed = 3600 mm/min
+; Printing Acceleration = 1000 mm/s^2
+; Jerk X-axis = 8
+; Jerk Y-axis = 8
+; Jerk Z-axis = 0.4
+; Jerk Extruder = 4.5
+;
+; Settings Pattern:
+; Linear Advance Version = 1.5
+; Starting Value Factor = 0.04
+; Ending Value Factor = 0.2
+; Factor Stepping = 0.02
+; Test Line Spacing = 5 mm
+; Test Line Length Slow = 20 mm
+; Test Line Length Fast = 60 mm
+; Print Pattern = Standard
+; Print Frame = false
+; Number Lines = false
+; Print Size X = 100 mm
+; Print Size Y = 65 mm
+; Print Rotation = 0 degree
+;
+; Settings Advance:
+; Nozzle / Line Ratio = 1.1
+; Bed leveling = 0
+; Use FWRETRACT = false
+; Extrusion Multiplier = 1
+; Prime Nozzle = false
+; Prime Extrusion Multiplier = 2.5
+; Prime Speed = 1800
+; Dwell Time = 2 s
+;
+; prepare printing
+;
+M107
+G90 ; absolute coordinate mode
+M83 ; extruder relative mode
+M140 S100 ; set bed temp
+M190 S100 ; wait for bed temp
+M104 S300 ; set initial temp
+G28 W ; home all without mesh bed level
+M860 S35 ; wait until PINDA is >= 35C
+M109 S250 ; wait for extruder temp
+G80 ; mesh bed leveling
+G81 ; print mesh results
+G1 Y-3.0 F1000.0 ; go outside print area
+G92 E0.0
+G1 X60.0 E22.0  F1000.0 ; intro line
+G1 X100.0 E8.0  F1000.0 ; intro line
+G92 E0.0
+
+G21 ; Millimeter units
+G90 ; Absolute XYZ
+M83 ; Relative E
+M204 P1000 ; Acceleration
+M205 X8 ; X Jerk
+M205 Y8 ; Y Jerk
+M205 Z0.4 ; Z Jerk
+M205 E4.5 ; E Jerk
+G92 E0 ; Reset extruder distance
+G1 Z0.2 F1200 ; Move to layer height
+G1 E-0.8 F3600 ; retract
+
+;
+; start the Test pattern
+;
+G4 P2000 ; Pause (dwell) for 2 seconds
+G1 X75 Y72.5 F7200 ; move to start
+M900 K0.04 ; set K-factor
+M117 K0.04 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y72.5 E0.7317 F1200 ; print line
+G1 X155 Y72.5 E2.1952 F4200 ; print line
+G1 X175 Y72.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y77.5 F7200 ; move to start
+M900 K0.06 ; set K-factor
+M117 K0.06 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y77.5 E0.7317 F1200 ; print line
+G1 X155 Y77.5 E2.1952 F4200 ; print line
+G1 X175 Y77.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y82.5 F7200 ; move to start
+M900 K0.08 ; set K-factor
+M117 K0.08 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y82.5 E0.7317 F1200 ; print line
+G1 X155 Y82.5 E2.1952 F4200 ; print line
+G1 X175 Y82.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y87.5 F7200 ; move to start
+M900 K0.1 ; set K-factor
+M117 K0.1 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y87.5 E0.7317 F1200 ; print line
+G1 X155 Y87.5 E2.1952 F4200 ; print line
+G1 X175 Y87.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y92.5 F7200 ; move to start
+M900 K0.12 ; set K-factor
+M117 K0.12 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y92.5 E0.7317 F1200 ; print line
+G1 X155 Y92.5 E2.1952 F4200 ; print line
+G1 X175 Y92.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y97.5 F7200 ; move to start
+M900 K0.14 ; set K-factor
+M117 K0.14 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y97.5 E0.7317 F1200 ; print line
+G1 X155 Y97.5 E2.1952 F4200 ; print line
+G1 X175 Y97.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y102.5 F7200 ; move to start
+M900 K0.16 ; set K-factor
+M117 K0.16 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y102.5 E0.7317 F1200 ; print line
+G1 X155 Y102.5 E2.1952 F4200 ; print line
+G1 X175 Y102.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y107.5 F7200 ; move to start
+M900 K0.18 ; set K-factor
+M117 K0.18 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y107.5 E0.7317 F1200 ; print line
+G1 X155 Y107.5 E2.1952 F4200 ; print line
+G1 X175 Y107.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y112.5 F7200 ; move to start
+M900 K0.2 ; set K-factor
+M117 K0.2 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y112.5 E0.7317 F1200 ; print line
+G1 X155 Y112.5 E2.1952 F4200 ; print line
+G1 X175 Y112.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+;
+; Mark the test area for reference
+M117 K0
+M900 K0 ; Set K-factor 0
+G1 X95 Y117.5 F7200 ; move to start
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y137.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X155 Y117.5 F7200 ; move to start
+G1 E0.8 F3600 ; un-retract
+G1 X155 Y137.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 Z0.3 F1200 ; zHop
+;
+; FINISH
+;
+
+G4 ; wait
+M221 S100
+M104 S0 ; turn off extruder
+M140 S0 ; turn off heatbed
+G1 Z30 E-20 ; Move print head up and retract
+G0 X0 Y210 F6000; home axis
+M84 ; disable motors
+M104 S0 ; turn off extruder
+M107 ; turn off fan

LinearAdvanceTest/Linear Advance 1.5 Ninjaflex Test Pattern.gcode

@@ -0,0 +1,351 @@
+; ### Marlin K-Factor Calibration Pattern ###
+; -------------------------------------------
+; Generated from https://marlinfw.org/tools/lin_advance/k-factor.html
+; Ref: https://marlinfw.org/docs/features/lin_advance.html
+; Ref: https://help.prusa3d.com/en/article/linear-advance_2252/
+;
+; Printer: PrusaMK3S
+; Filament: PETG
+; Created: Sat May 09 2020 20:56:51 GMT-0700 (Pacific Daylight Time)
+;
+; Settings Printer:
+; Filament Diameter = 1.75 mm
+; Nozzle Diameter = 0.4 mm
+; Nozzle Temperature = 230 °C
+; Bed Temperature = 50 °C
+; Retraction Distance = 5 mm
+; Layer Height = 0.2 mm
+; Z-axis Offset = 0 mm
+;
+; Settings Print Bed:
+; Bed Shape = Rect
+; Bed Size X = 250 mm
+; Bed Size Y = 210 mm
+; Origin Bed Center = false
+;
+; Settings Speed:
+; Slow Printing Speed = 600 mm/min
+; Fast Printing Speed = 2400 mm/min
+; Movement Speed = 7200 mm/min
+; Retract Speed = 3600 mm/min
+; Printing Acceleration = 1000 mm/s^2
+; Jerk X-axis = 8
+; Jerk Y-axis = 8
+; Jerk Z-axis = 0.4
+; Jerk Extruder = 3
+;
+; Settings Pattern:
+; Linear Advance Version = 1.5
+; Starting Value Factor = 1
+; Ending Value Factor = 3
+; Factor Stepping = 0.1
+; Test Line Spacing = 5 mm
+; Test Line Length Slow = 20 mm
+; Test Line Length Fast = 60 mm
+; Print Pattern = Standard
+; Print Frame = false
+; Number Lines = false
+; Print Size X = 100 mm
+; Print Size Y = 125 mm
+; Print Rotation = 0 degree
+;
+; Settings Advance:
+; Nozzle / Line Ratio = 1.1
+; Bed leveling = 0
+; Use FWRETRACT = false
+; Extrusion Multiplier = 1
+; Prime Nozzle = false
+; Prime Extrusion Multiplier = 2.5
+; Prime Speed = 1800
+; Dwell Time = 2 s
+;
+; prepare printing
+;
+M107
+G90 ; absolute coordinate mode
+M83 ; extruder relative mode
+M140 S50 ; set bed temp
+M190 S50 ; wait for bed temp
+M104 S230 ; set initial temp
+G28 W ; home all without mesh bed level
+M860 S35 ; wait until PINDA is >= 35C
+M109 S250 ; wait for extruder temp
+G80 ; mesh bed leveling
+G81 ; print mesh results
+G1 Y-3.0 F1000.0 ; go outside print area
+M106 S50 ; turn on fan
+G92 E0.0
+G1 X60.0 E28.0  F1000.0 ; intro line
+G1 X100.0 E8.0  F1000.0 ; intro line
+G92 E0.0
+
+G21 ; Millimeter units
+G90 ; Absolute XYZ
+M83 ; Relative E
+M204 P1000 ; Acceleration
+M205 X8 ; X Jerk
+M205 Y8 ; Y Jerk
+M205 Z0.4 ; Z Jerk
+M205 E3 ; E Jerk
+G92 E0 ; Reset extruder distance
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+
+;
+; print anchor frame
+;
+G1 X75 Y39.5 F7200 ; move to start
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X75 Y145.5 E4.2659 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75.44 Y145.5 F7200 ; move to start
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X75.44 Y39.5 E4.2659 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X175 Y39.5 F7200 ; move to start
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X175 Y145.5 E4.2659 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X174.56 Y145.5 F7200 ; move to start
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X174.56 Y39.5 E4.2659 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+;
+; start the Test pattern
+;
+G1 X75 Y42.5 F7200 ; move to start
+M900 K0 ; set K-factor
+M117 K0 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y42.5 E0.7317 F600 ; print line
+G1 X155 Y42.5 E2.1952 F2400 ; print line
+G1 X175 Y42.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y47.5 F7200 ; move to start
+M900 K0.1 ; set K-factor
+M117 K0.1 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y47.5 E0.7317 F600 ; print line
+G1 X155 Y47.5 E2.1952 F2400 ; print line
+G1 X175 Y47.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y52.5 F7200 ; move to start
+M900 K0.2 ; set K-factor
+M117 K0.2 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y52.5 E0.7317 F600 ; print line
+G1 X155 Y52.5 E2.1952 F2400 ; print line
+G1 X175 Y52.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y57.5 F7200 ; move to start
+M900 K0.3 ; set K-factor
+M117 K0.3 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y57.5 E0.7317 F600 ; print line
+G1 X155 Y57.5 E2.1952 F2400 ; print line
+G1 X175 Y57.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y62.5 F7200 ; move to start
+M900 K0.4 ; set K-factor
+M117 K0.4 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y62.5 E0.7317 F600 ; print line
+G1 X155 Y62.5 E2.1952 F2400 ; print line
+G1 X175 Y62.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y67.5 F7200 ; move to start
+M900 K0.5 ; set K-factor
+M117 K0.5 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y67.5 E0.7317 F600 ; print line
+G1 X155 Y67.5 E2.1952 F2400 ; print line
+G1 X175 Y67.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y72.5 F7200 ; move to start
+M900 K0.6 ; set K-factor
+M117 K0.6 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y72.5 E0.7317 F600 ; print line
+G1 X155 Y72.5 E2.1952 F2400 ; print line
+G1 X175 Y72.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y77.5 F7200 ; move to start
+M900 K0.7 ; set K-factor
+M117 K0.7 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y77.5 E0.7317 F600 ; print line
+G1 X155 Y77.5 E2.1952 F2400 ; print line
+G1 X175 Y77.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y82.5 F7200 ; move to start
+M900 K0.8 ; set K-factor
+M117 K0.8 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y82.5 E0.7317 F600 ; print line
+G1 X155 Y82.5 E2.1952 F2400 ; print line
+G1 X175 Y82.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y87.5 F7200 ; move to start
+M900 K0.9 ; set K-factor
+M117 K0.9 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y87.5 E0.7317 F600 ; print line
+G1 X155 Y87.5 E2.1952 F2400 ; print line
+G1 X175 Y87.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y92.5 F7200 ; move to start
+M900 K1 ; set K-factor
+M117 K1 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y92.5 E0.7317 F600 ; print line
+G1 X155 Y92.5 E2.1952 F2400 ; print line
+G1 X175 Y92.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y97.5 F7200 ; move to start
+M900 K1.1 ; set K-factor
+M117 K1.1 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y97.5 E0.7317 F600 ; print line
+G1 X155 Y97.5 E2.1952 F2400 ; print line
+G1 X175 Y97.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y102.5 F7200 ; move to start
+M900 K1.2 ; set K-factor
+M117 K1.2 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y102.5 E0.7317 F600 ; print line
+G1 X155 Y102.5 E2.1952 F2400 ; print line
+G1 X175 Y102.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y107.5 F7200 ; move to start
+M900 K1.3 ; set K-factor
+M117 K1.3 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y107.5 E0.7317 F600 ; print line
+G1 X155 Y107.5 E2.1952 F2400 ; print line
+G1 X175 Y107.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y112.5 F7200 ; move to start
+M900 K1.4 ; set K-factor
+M117 K1.4 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y112.5 E0.7317 F600 ; print line
+G1 X155 Y112.5 E2.1952 F2400 ; print line
+G1 X175 Y112.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y117.5 F7200 ; move to start
+M900 K1.5 ; set K-factor
+M117 K1.5 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y117.5 E0.7317 F600 ; print line
+G1 X155 Y117.5 E2.1952 F2400 ; print line
+G1 X175 Y117.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y122.5 F7200 ; move to start
+M900 K1.6 ; set K-factor
+M117 K1.6 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y122.5 E0.7317 F600 ; print line
+G1 X155 Y122.5 E2.1952 F2400 ; print line
+G1 X175 Y122.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y127.5 F7200 ; move to start
+M900 K1.7 ; set K-factor
+M117 K1.7 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y127.5 E0.7317 F600 ; print line
+G1 X155 Y127.5 E2.1952 F2400 ; print line
+G1 X175 Y127.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y132.5 F7200 ; move to start
+M900 K1.8 ; set K-factor
+M117 K1.8 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y132.5 E0.7317 F600 ; print line
+G1 X155 Y132.5 E2.1952 F2400 ; print line
+G1 X175 Y132.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y137.5 F7200 ; move to start
+M900 K1.9 ; set K-factor
+M117 K1.9 ; 
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y137.5 E0.7317 F600 ; print line
+G1 X155 Y137.5 E2.1952 F2400 ; print line
+G1 X175 Y137.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X75 Y142.5 F7200 ; move to start
+;
+; Mark the test area for reference
+M117 K0
+M900 K0 ; Set K-factor 0
+G1 X95 Y147.5 F7200 ; move to start
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X95 Y167.5 E0.7317 F600 ; print line
+G1 E-5 F3600 ; retract
+G1 Z0.8 F1200 ; Z hop
+G1 X155 Y147.5 F7200 ; move to start
+G1 Z0.2 F1200 ; Z unhop
+G1 E5 F3600 ; un-retract
+G1 X155 Y167.5 E0.7317 F600 ; print line
+;
+; FINISH
+;
+
+G4 ; wait
+M221 S100
+M104 S0 ; turn off extruder
+M140 S0 ; turn off heatbed
+G1 Z30 E-20 ; Move print head up and retract
+G0 X0 Y210 F6000; home axis
+M84 ; disable motors
+M104 S0 ; turn off extruder
+M107 ; turn off fan

LinearAdvanceTest/Linear Advance 1.5 PETG Test Pattern.gcode

@@ -0,0 +1,194 @@
+; ### Marlin K-Factor Calibration Pattern ###
+; -------------------------------------------
+; Generated from https://marlinfw.org/tools/lin_advance/k-factor.html
+; Ref: https://marlinfw.org/docs/features/lin_advance.html
+; Ref: https://help.prusa3d.com/en/article/linear-advance_2252/
+;
+; Printer: PrusaMK3S
+; Filament: PETG
+; Created: Sat May 09 2020 20:56:51 GMT-0700 (Pacific Daylight Time)
+;
+; Settings Printer:
+; Filament Diameter = 1.75 mm
+; Nozzle Diameter = 0.4 mm
+; Nozzle Temperature = 250 °C
+; Bed Temperature = 90 °C
+; Retraction Distance = 0.8 mm
+; Layer Height = 0.2 mm
+; Z-axis Offset = 0 mm
+;
+; Settings Print Bed:
+; Bed Shape = Rect
+; Bed Size X = 250 mm
+; Bed Size Y = 210 mm
+; Origin Bed Center = false
+;
+; Settings Speed:
+; Slow Printing Speed = 1200 mm/min
+; Fast Printing Speed = 4200 mm/min
+; Movement Speed = 7200 mm/min
+; Retract Speed = 3600 mm/min
+; Printing Acceleration = 1000 mm/s^2
+; Jerk X-axis = 8
+; Jerk Y-axis = 8
+; Jerk Z-axis = 0.4
+; Jerk Extruder = 4.5
+;
+; Settings Pattern:
+; Linear Advance Version = 1.5
+; Starting Value Factor = 0
+; Ending Value Factor = 0.16
+; Factor Stepping = 0.02
+; Test Line Spacing = 5 mm
+; Test Line Length Slow = 20 mm
+; Test Line Length Fast = 60 mm
+; Print Pattern = Standard
+; Print Frame = false
+; Number Lines = false
+; Print Size X = 100 mm
+; Print Size Y = 65 mm
+; Print Rotation = 0 degree
+;
+; Settings Advance:
+; Nozzle / Line Ratio = 1.1
+; Bed leveling = 0
+; Use FWRETRACT = false
+; Extrusion Multiplier = 1
+; Prime Nozzle = false
+; Prime Extrusion Multiplier = 2.5
+; Prime Speed = 1800
+; Dwell Time = 2 s
+;
+; prepare printing
+;
+M107
+G90 ; absolute coordinate mode
+M83 ; extruder relative mode
+M140 S90 ; set bed temp
+M190 S90 ; wait for bed temp
+M104 S250 ; set initial temp
+G28 W ; home all without mesh bed level
+M860 S35 ; wait until PINDA is >= 35C
+M109 S250 ; wait for extruder temp
+G80 ; mesh bed leveling
+G81 ; print mesh results
+G1 Y-3.0 F1000.0 ; go outside print area
+G92 E0.0
+G1 X60.0 E22.0  F1000.0 ; intro line
+G1 X100.0 E8.0  F1000.0 ; intro line
+G92 E0.0
+
+G21 ; Millimeter units
+G90 ; Absolute XYZ
+M83 ; Relative E
+M204 P1000 ; Acceleration
+M205 X8 ; X Jerk
+M205 Y8 ; Y Jerk
+M205 Z0.4 ; Z Jerk
+M205 E4.5 ; E Jerk
+G92 E0 ; Reset extruder distance
+G1 Z0.2 F1200 ; Move to layer height
+G1 E-0.8 F3600 ; retract
+
+;
+; start the Test pattern
+;
+G4 P2000 ; Pause (dwell) for 2 seconds
+G1 X75 Y72.5 F7200 ; move to start
+M900 K0 ; set K-factor
+M117 K0 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y72.5 E0.7317 F1200 ; print line
+G1 X155 Y72.5 E2.1952 F4200 ; print line
+G1 X175 Y72.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y77.5 F7200 ; move to start
+M900 K0.02 ; set K-factor
+M117 K0.02 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y77.5 E0.7317 F1200 ; print line
+G1 X155 Y77.5 E2.1952 F4200 ; print line
+G1 X175 Y77.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y82.5 F7200 ; move to start
+M900 K0.04 ; set K-factor
+M117 K0.04 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y82.5 E0.7317 F1200 ; print line
+G1 X155 Y82.5 E2.1952 F4200 ; print line
+G1 X175 Y82.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y87.5 F7200 ; move to start
+M900 K0.06 ; set K-factor
+M117 K0.06 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y87.5 E0.7317 F1200 ; print line
+G1 X155 Y87.5 E2.1952 F4200 ; print line
+G1 X175 Y87.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y92.5 F7200 ; move to start
+M900 K0.08 ; set K-factor
+M117 K0.08 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y92.5 E0.7317 F1200 ; print line
+G1 X155 Y92.5 E2.1952 F4200 ; print line
+G1 X175 Y92.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y97.5 F7200 ; move to start
+M900 K0.1 ; set K-factor
+M117 K0.1 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y97.5 E0.7317 F1200 ; print line
+G1 X155 Y97.5 E2.1952 F4200 ; print line
+G1 X175 Y97.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y102.5 F7200 ; move to start
+M900 K0.12 ; set K-factor
+M117 K0.12 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y102.5 E0.7317 F1200 ; print line
+G1 X155 Y102.5 E2.1952 F4200 ; print line
+G1 X175 Y102.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y107.5 F7200 ; move to start
+M900 K0.14 ; set K-factor
+M117 K0.14 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y107.5 E0.7317 F1200 ; print line
+G1 X155 Y107.5 E2.1952 F4200 ; print line
+G1 X175 Y107.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y112.5 F7200 ; move to start
+M900 K0.16 ; set K-factor
+M117 K0.16 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y112.5 E0.7317 F1200 ; print line
+G1 X155 Y112.5 E2.1952 F4200 ; print line
+G1 X175 Y112.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+;
+; Mark the test area for reference
+M117 K0
+M900 K0 ; Set K-factor 0
+G1 X95 Y117.5 F7200 ; move to start
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y137.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X155 Y117.5 F7200 ; move to start
+G1 E0.8 F3600 ; un-retract
+G1 X155 Y137.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 Z0.3 F1200 ; zHop
+;
+; FINISH
+;
+
+G4 ; wait
+M221 S100
+M104 S0 ; turn off extruder
+M140 S0 ; turn off heatbed
+G1 Z30 E-20 ; Move print head up and retract
+G0 X0 Y210 F6000; home axis
+M84 ; disable motors
+M104 S0 ; turn off extruder
+M107 ; turn off fan

LinearAdvanceTest/Linear Advance 1.5 PLA Test Pattern.gcode

@@ -0,0 +1,194 @@
+; ### Marlin K-Factor Calibration Pattern ###
+; -------------------------------------------
+; Generated from https://marlinfw.org/tools/lin_advance/k-factor.html
+; Ref: https://marlinfw.org/docs/features/lin_advance.html
+; Ref: https://help.prusa3d.com/en/article/linear-advance_2252/
+;
+; Printer: PrusaMK3S
+; Filament: PETG
+; Created: Sat May 09 2020 20:56:51 GMT-0700 (Pacific Daylight Time)
+;
+; Settings Printer:
+; Filament Diameter = 1.75 mm
+; Nozzle Diameter = 0.4 mm
+; Nozzle Temperature = 220 °C
+; Bed Temperature = 70 °C
+; Retraction Distance = 0.8 mm
+; Layer Height = 0.2 mm
+; Z-axis Offset = 0 mm
+;
+; Settings Print Bed:
+; Bed Shape = Rect
+; Bed Size X = 250 mm
+; Bed Size Y = 210 mm
+; Origin Bed Center = false
+;
+; Settings Speed:
+; Slow Printing Speed = 1200 mm/min
+; Fast Printing Speed = 4200 mm/min
+; Movement Speed = 7200 mm/min
+; Retract Speed = 3600 mm/min
+; Printing Acceleration = 1000 mm/s^2
+; Jerk X-axis = 8
+; Jerk Y-axis = 8
+; Jerk Z-axis = 0.4
+; Jerk Extruder = 4.5
+;
+; Settings Pattern:
+; Linear Advance Version = 1.5
+; Starting Value Factor = 0
+; Ending Value Factor = 0.16
+; Factor Stepping = 0.02
+; Test Line Spacing = 5 mm
+; Test Line Length Slow = 20 mm
+; Test Line Length Fast = 60 mm
+; Print Pattern = Standard
+; Print Frame = false
+; Number Lines = false
+; Print Size X = 100 mm
+; Print Size Y = 65 mm
+; Print Rotation = 0 degree
+;
+; Settings Advance:
+; Nozzle / Line Ratio = 1.1
+; Bed leveling = 0
+; Use FWRETRACT = false
+; Extrusion Multiplier = 1
+; Prime Nozzle = false
+; Prime Extrusion Multiplier = 2.5
+; Prime Speed = 1800
+; Dwell Time = 2 s
+;
+; prepare printing
+;
+M107
+G90 ; absolute coordinate mode
+M83 ; extruder relative mode
+M140 S70 ; set bed temp
+M190 S70 ; wait for bed temp
+M104 S220 ; set initial temp
+G28 W ; home all without mesh bed level
+M860 S35 ; wait until PINDA is >= 35C
+M109 S250 ; wait for extruder temp
+G80 ; mesh bed leveling
+G81 ; print mesh results
+G1 Y-3.0 F1000.0 ; go outside print area
+G92 E0.0
+G1 X60.0 E22.0  F1000.0 ; intro line
+G1 X100.0 E8.0  F1000.0 ; intro line
+G92 E0.0
+
+G21 ; Millimeter units
+G90 ; Absolute XYZ
+M83 ; Relative E
+M204 P1000 ; Acceleration
+M205 X8 ; X Jerk
+M205 Y8 ; Y Jerk
+M205 Z0.4 ; Z Jerk
+M205 E4.5 ; E Jerk
+G92 E0 ; Reset extruder distance
+G1 Z0.2 F1200 ; Move to layer height
+G1 E-0.8 F3600 ; retract
+
+;
+; start the Test pattern
+;
+G4 P2000 ; Pause (dwell) for 2 seconds
+G1 X75 Y72.5 F7200 ; move to start
+M900 K0 ; set K-factor
+M117 K0 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y72.5 E0.7317 F1200 ; print line
+G1 X155 Y72.5 E2.1952 F4200 ; print line
+G1 X175 Y72.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y77.5 F7200 ; move to start
+M900 K0.02 ; set K-factor
+M117 K0.02 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y77.5 E0.7317 F1200 ; print line
+G1 X155 Y77.5 E2.1952 F4200 ; print line
+G1 X175 Y77.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y82.5 F7200 ; move to start
+M900 K0.04 ; set K-factor
+M117 K0.04 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y82.5 E0.7317 F1200 ; print line
+G1 X155 Y82.5 E2.1952 F4200 ; print line
+G1 X175 Y82.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y87.5 F7200 ; move to start
+M900 K0.06 ; set K-factor
+M117 K0.06 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y87.5 E0.7317 F1200 ; print line
+G1 X155 Y87.5 E2.1952 F4200 ; print line
+G1 X175 Y87.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y92.5 F7200 ; move to start
+M900 K0.08 ; set K-factor
+M117 K0.08 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y92.5 E0.7317 F1200 ; print line
+G1 X155 Y92.5 E2.1952 F4200 ; print line
+G1 X175 Y92.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y97.5 F7200 ; move to start
+M900 K0.1 ; set K-factor
+M117 K0.1 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y97.5 E0.7317 F1200 ; print line
+G1 X155 Y97.5 E2.1952 F4200 ; print line
+G1 X175 Y97.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y102.5 F7200 ; move to start
+M900 K0.12 ; set K-factor
+M117 K0.12 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y102.5 E0.7317 F1200 ; print line
+G1 X155 Y102.5 E2.1952 F4200 ; print line
+G1 X175 Y102.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y107.5 F7200 ; move to start
+M900 K0.14 ; set K-factor
+M117 K0.14 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y107.5 E0.7317 F1200 ; print line
+G1 X155 Y107.5 E2.1952 F4200 ; print line
+G1 X175 Y107.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X75 Y112.5 F7200 ; move to start
+M900 K0.16 ; set K-factor
+M117 K0.16 ; 
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y112.5 E0.7317 F1200 ; print line
+G1 X155 Y112.5 E2.1952 F4200 ; print line
+G1 X175 Y112.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+;
+; Mark the test area for reference
+M117 K0
+M900 K0 ; Set K-factor 0
+G1 X95 Y117.5 F7200 ; move to start
+G1 E0.8 F3600 ; un-retract
+G1 X95 Y137.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 X155 Y117.5 F7200 ; move to start
+G1 E0.8 F3600 ; un-retract
+G1 X155 Y137.5 E0.7317 F1200 ; print line
+G1 E-0.8 F3600 ; retract
+G1 Z0.3 F1200 ; zHop
+;
+; FINISH
+;
+
+G4 ; wait
+M221 S100
+M104 S0 ; turn off extruder
+M140 S0 ; turn off heatbed
+G1 Z30 E-20 ; Move print head up and retract
+G0 X0 Y210 F6000; home axis
+M84 ; disable motors
+M104 S0 ; turn off extruder
+M107 ; turn off fan