Indentations

Firmware/Marlin_main.cpp

@@ -3799,92 +3799,103 @@ void process_commands()
   float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD;
   int8_t SilentMode;
 #endif
-  /*!
-  
-  ---------------------------------------------------------------------------------
-  ### M117 - Display Message <a href="https://reprap.org/wiki/G-code#M117:_Display_Message">M117: Display Message</a>
-  This causes the given message to be shown in the status line on an attached LCD.
-  It is processed early as to allow printing messages that contain G, M, N or T.
-  
-  ---------------------------------------------------------------------------------
-  ### Special internal commands
-  These are used by internal functions to process certain actions in the right order. Some of these are also usable by the user.
-  They are processed early as the commands are complex (strings).
-  These are only available on the MK3(S) as these require TMC2130 drivers:
-    - CRASH DETECTED
-    - CRASH RECOVER
-    - CRASH_CANCEL
-    - TMC_SET_WAVE
-    - TMC_SET_STEP
-    - TMC_SET_CHOP
- */
-  if (code_seen_P(PSTR("M117"))) { //moved to highest priority place to be able to to print strings which includes "G", "PRUSA" and "^"
-	  starpos = (strchr(strchr_pointer + 5, '*'));
-	  if (starpos != NULL)
-		  *(starpos) = '\0';
-	  lcd_setstatus(strchr_pointer + 5);
-	  custom_message_type = CustomMsg::MsgUpdate;
-  }
+    /*!
+
+    ---------------------------------------------------------------------------------
+    ### M117 - Display Message <a href="https://reprap.org/wiki/G-code#M117:_Display_Message">M117: Display Message</a>
+    This causes the given message to be shown in the status line on an attached LCD.
+    It is processed early as to allow printing messages that contain G, M, N or T.
+
+    ---------------------------------------------------------------------------------
+    ### Special internal commands
+    These are used by internal functions to process certain actions in the right order. Some of these are also usable by the user.
+    They are processed early as the commands are complex (strings).
+    These are only available on the MK3(S) as these require TMC2130 drivers:
+        - CRASH DETECTED
+        - CRASH RECOVER
+        - CRASH_CANCEL
+        - TMC_SET_WAVE
+        - TMC_SET_STEP
+        - TMC_SET_CHOP
+    */
+    if (code_seen_P(PSTR("M117"))) //moved to highest priority place to be able to to print strings which includes "G", "PRUSA" and "^"
+    {
+        starpos = (strchr(strchr_pointer + 5, '*'));
+        if (starpos != NULL)
+            *(starpos) = '\0';
+        lcd_setstatus(strchr_pointer + 5);
+        custom_message_type = CustomMsg::MsgUpdate;
+    }
 
     /*!
-	### M0, M1 - Stop the printer <a href="https://reprap.org/wiki/G-code#M0:_Stop_or_Unconditional_stop">M0: Stop or Unconditional stop</a>
-  #### Usage
+    ### M0, M1 - Stop the printer <a href="https://reprap.org/wiki/G-code#M0:_Stop_or_Unconditional_stop">M0: Stop or Unconditional stop</a>
+    #### Usage
 
       M0 [P<ms<] [S<sec>] [string]
       M1 [P<ms>] [S<sec>] [string] 
 
-  #### Parameters
+    #### Parameters
   
     - `P<ms>`  - Expire time, in milliseconds
     - `S<sec>` - Expire time, in seconds
     - `string` - Must for M1 and optional for M0 message to display on the LCD
     */
 
-  else if (code_seen_P(PSTR("M0")) || code_seen_P(PSTR("M1 "))) { // M0 and M1 - (Un)conditional stop - Wait for user button press on LCD
+    else if (code_seen_P(PSTR("M0")) || code_seen_P(PSTR("M1 "))) // M0 and M1 - (Un)conditional stop - Wait for user button press on LCD
+    {
 
-      char *src = strchr_pointer + 2;
+        char *src = strchr_pointer + 2;
 
-      codenum = 0;
+        codenum = 0;
 
-      bool hasP = false, hasS = false;
-      if (code_seen('P')) {
-        codenum = code_value(); // milliseconds to wait
-        hasP = codenum > 0;
-      }
-      if (code_seen('S')) {
-        codenum = code_value() * 1000; // seconds to wait
-        hasS = codenum > 0;
-      }
-      starpos = strchr(src, '*');
-      if (starpos != NULL) *(starpos) = '\0';
-      while (*src == ' ') ++src;
-	  custom_message_type = CustomMsg::M0Wait;
-      if (!hasP && !hasS && *src != '\0') {
-        lcd_setstatus(src);
-      } else {
-        LCD_MESSAGERPGM(_i("Wait for user..."));////MSG_USERWAIT
-      }
+        bool hasP = false, hasS = false;
+        if (code_seen('P'))
+        {
+            codenum = code_value(); // milliseconds to wait
+            hasP = codenum > 0;
+        }
+        if (code_seen('S'))
+        {
+            codenum = code_value() * 1000; // seconds to wait
+            hasS = codenum > 0;
+        }
+        starpos = strchr(src, '*');
+        if (starpos != NULL) *(starpos) = '\0';
+        while (*src == ' ') ++src;
+            custom_message_type = CustomMsg::M0Wait;
+        if (!hasP && !hasS && *src != '\0')
+        {
+            lcd_setstatus(src);
+        }
+        else
+        {
+            LCD_MESSAGERPGM(_i("Wait for user..."));////MSG_USERWAIT
+        }
 
-      lcd_ignore_click();				//call lcd_ignore_click aslo for else ???
-      st_synchronize();
-      previous_millis_cmd = _millis();
-      if (codenum > 0){
-        codenum += _millis();  // keep track of when we started waiting
-		KEEPALIVE_STATE(PAUSED_FOR_USER);
-        while(_millis() < codenum && !lcd_clicked()){
-          manage_heater();
-          manage_inactivity(true);
-          lcd_update(0);
+        lcd_ignore_click();				//call lcd_ignore_click aslo for else ???
+        st_synchronize();
+        previous_millis_cmd = _millis();
+        if (codenum > 0)
+        {
+            codenum += _millis();  // keep track of when we started waiting
+            KEEPALIVE_STATE(PAUSED_FOR_USER);
+            while(_millis() < codenum && !lcd_clicked())
+            {
+                manage_heater();
+                manage_inactivity(true);
+                lcd_update(0);
+            }
+            KEEPALIVE_STATE(IN_HANDLER);
+            lcd_ignore_click(false);
         }
-		KEEPALIVE_STATE(IN_HANDLER);
-        lcd_ignore_click(false);
-      }else{
-        marlin_wait_for_click();
-      }
-      if (IS_SD_PRINTING)
-        custom_message_type = CustomMsg::Status;
-      else
-        LCD_MESSAGERPGM(_T(WELCOME_MSG));
+        else
+        {
+            marlin_wait_for_click();
+        }
+        if (IS_SD_PRINTING)
+            custom_message_type = CustomMsg::Status;
+        else
+            LCD_MESSAGERPGM(_T(WELCOME_MSG));
     }
 
 #ifdef TMC2130