Remove "hh" in fmt where it makes no difference

Firmware/ConfigurationStore.cpp

@@ -32,7 +32,7 @@ static bool EEPROM_writeData(uint8_t* pos, uint8_t* value, uint8_t size, const c
 #endif //DEBUG_EEPROM_WRITE
 {
 #ifdef DEBUG_EEPROM_WRITE
-	printf_P(PSTR("EEPROM_WRITE_VAR addr=0x%04x size=0x%02hhx name=%s\n"), pos, size, name);
+	printf_P(PSTR("EEPROM_WRITE_VAR addr=0x%04x size=0x%02x name=%s\n"), pos, size, name);
 #endif //DEBUG_EEPROM_WRITE
 	while (size--)
 	{
@@ -56,7 +56,7 @@ static void EEPROM_readData(uint8_t* pos, uint8_t* value, uint8_t size, const ch
 #endif //DEBUG_EEPROM_READ
 {
 #ifdef DEBUG_EEPROM_READ
-	printf_P(PSTR("EEPROM_READ_VAR addr=0x%04x size=0x%02hhx name=%s\n"), pos, size, name);
+	printf_P(PSTR("EEPROM_READ_VAR addr=0x%04x size=0x%02x name=%s\n"), pos, size, name);
 #endif //DEBUG_EEPROM_READ
     while(size--)
     {

Firmware/Marlin_main.cpp

@@ -1518,7 +1518,7 @@ void setup()
 	xflash_rd_uid(uid);
 	puts_P(_n("XFLASH UID="));
 	for (uint8_t i = 0; i < 8; i ++)
-		printf_P(PSTR("%02hhx"), uid[i]);
+		printf_P(PSTR("%02x"), uid[i]);
 	putchar('\n');
 	list_sec_lang_from_external_flash();
 #endif //DEBUG_XFLASH
@@ -4450,7 +4450,7 @@ void process_commands()
 				tmc2130_chopper_config[axis].hend = chop2 & 15;
 				tmc2130_chopper_config[axis].tbl = chop3 & 3;
 				tmc2130_setup_chopper(axis, tmc2130_mres[axis], tmc2130_current_h[axis], tmc2130_current_r[axis]);
-				//printf_P(_N("TMC_SET_CHOP_%c %hhd %hhd %hhd %hhd\n"), "xyze"[axis], chop0, chop1, chop2, chop3);
+				//printf_P(_N("TMC_SET_CHOP_%c %d %d %d %d\n"), "xyze"[axis], chop0, chop1, chop2, chop3);
 			}
 		}
 	}
@@ -4459,7 +4459,7 @@ void process_commands()
 	{
 		uint8_t bl = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 10, NULL, 10);
 		st_backlash_x = bl;
-		printf_P(_N("st_backlash_x = %hhd\n"), st_backlash_x);
+		printf_P(_N("st_backlash_x = %d\n"), st_backlash_x);
 	}
 #endif //BACKLASH_X
 #ifdef BACKLASH_Y
@@ -4467,7 +4467,7 @@ void process_commands()
 	{
 		uint8_t bl = (uint8_t)strtol(CMDBUFFER_CURRENT_STRING + 10, NULL, 10);
 		st_backlash_y = bl;
-		printf_P(_N("st_backlash_y = %hhd\n"), st_backlash_y);
+		printf_P(_N("st_backlash_y = %d\n"), st_backlash_y);
 	}
 #endif //BACKLASH_Y
 #endif //TMC2130

Firmware/cmdqueue.cpp

@@ -94,7 +94,7 @@ void cmdqueue_reset()
 {
 	while (buflen)
 	{
-		// printf_P(PSTR("dumping: \"%s\" of type %hu\n"), cmdbuffer+bufindr+CMDHDRSIZE, CMDBUFFER_CURRENT_TYPE);
+		// printf_P(PSTR("dumping: \"%s\" of type %u\n"), cmdbuffer+bufindr+CMDHDRSIZE, CMDBUFFER_CURRENT_TYPE);
 		ClearToSend();
 		cmdqueue_pop_front();
 	}

Firmware/fsensor.cpp

@@ -188,7 +188,7 @@ void fsensor_init(void)
 {
 #ifdef PAT9125
 	uint8_t pat9125 = pat9125_init();
-	printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
+	printf_P(PSTR("PAT9125_init:%u\n"), pat9125);
 #endif //PAT9125
 	uint8_t fsensor_enabled = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
 	fsensor_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
@@ -237,7 +237,7 @@ bool fsensor_enable(bool bUpdateEEPROM)
 
 	if (mmu_enabled == false) { //filament sensor is pat9125, enable only if it is working
 		uint8_t pat9125 = pat9125_init();
-		printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
+		printf_P(PSTR("PAT9125_init:%u\n"), pat9125);
 		if (pat9125)
 			fsensor_not_responding = false;
 		else
@@ -435,8 +435,8 @@ void fsensor_oq_meassure_stop(void)
 {
 	if (!fsensor_enabled) return;
 	if (!fsensor_oq_meassure_enabled) return;
-	printf_P(PSTR("fsensor_oq_meassure_stop, %hhu samples\n"), fsensor_oq_samples);
-	printf_P(_N(" st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
+	printf_P(PSTR("fsensor_oq_meassure_stop, %u samples\n"), fsensor_oq_samples);
+	printf_P(_N(" st_sum=%u yd_sum=%u er_sum=%u er_max=%u\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
 	printf_P(_N(" yd_min=%u yd_max=%u yd_avg=%u sh_avg=%u\n"), fsensor_oq_yd_min, fsensor_oq_yd_max, (uint16_t)((uint32_t)fsensor_oq_yd_sum * fsensor_chunk_len / fsensor_oq_st_sum), (uint16_t)(fsensor_oq_sh_sum / fsensor_oq_samples));
 	fsensor_oq_meassure = false;
 }
@@ -453,10 +453,10 @@ bool fsensor_oq_result(void)
 	bool res_er_sum = (fsensor_oq_er_sum <= FSENSOR_OQ_MAX_ES);
 	printf_P(_N(" er_sum = %u %S\n"), fsensor_oq_er_sum, (res_er_sum?_OK:_NG));
 	bool res_er_max = (fsensor_oq_er_max <= FSENSOR_OQ_MAX_EM);
-	printf_P(_N(" er_max = %hhu %S\n"), fsensor_oq_er_max, (res_er_max?_OK:_NG));
+	printf_P(_N(" er_max = %u %S\n"), fsensor_oq_er_max, (res_er_max?_OK:_NG));
 	uint8_t yd_avg = ((uint32_t)fsensor_oq_yd_sum * fsensor_chunk_len / fsensor_oq_st_sum);
 	bool res_yd_avg = (yd_avg >= FSENSOR_OQ_MIN_YD) && (yd_avg <= FSENSOR_OQ_MAX_YD);
-	printf_P(_N(" yd_avg = %hhu %S\n"), yd_avg, (res_yd_avg?_OK:_NG));
+	printf_P(_N(" yd_avg = %u %S\n"), yd_avg, (res_yd_avg?_OK:_NG));
 	bool res_yd_max = (fsensor_oq_yd_max <= (yd_avg * FSENSOR_OQ_MAX_PD));
 	printf_P(_N(" yd_max = %u %S\n"), fsensor_oq_yd_max, (res_yd_max?_OK:_NG));
 	bool res_yd_min = (fsensor_oq_yd_min >= (yd_avg / FSENSOR_OQ_MAX_ND));
@@ -472,7 +472,7 @@ bool fsensor_oq_result(void)
 	bool res_sh_avg = (sh_avg <= FSENSOR_OQ_MAX_SH);
 	if (yd_qua >= 8) res_sh_avg = true;
 
-	printf_P(_N(" sh_avg = %hhu %S\n"), sh_avg, (res_sh_avg?_OK:_NG));
+	printf_P(_N(" sh_avg = %u %S\n"), sh_avg, (res_sh_avg?_OK:_NG));
 	bool res = res_er_sum && res_er_max && res_yd_avg && res_yd_max && res_yd_min && res_sh_avg;
 	printf_P(_N("fsensor_oq_result %S\n"), (res?_OK:_NG));
 	return res;
@@ -559,8 +559,8 @@ FORCE_INLINE static void fsensor_isr(int st_cnt)
 #ifdef DEBUG_FSENSOR_LOG
 	if (fsensor_log)
 	{
-		printf_P(_N("FSENSOR cnt=%d dy=%d err=%hhu %S\n"), st_cnt, pat9125_y, fsensor_err_cnt, (fsensor_err_cnt > old_err_cnt)?_N("NG!"):_N("OK"));
-		if (fsensor_oq_meassure) printf_P(_N("FSENSOR st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu yd_max=%u\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max, fsensor_oq_yd_max);
+		printf_P(_N("FSENSOR cnt=%d dy=%d err=%u %S\n"), st_cnt, pat9125_y, fsensor_err_cnt, (fsensor_err_cnt > old_err_cnt)?_N("NG!"):_N("OK"));
+		if (fsensor_oq_meassure) printf_P(_N("FSENSOR st_sum=%u yd_sum=%u er_sum=%u er_max=%u yd_max=%u\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max, fsensor_oq_yd_max);
 	}
 #endif //DEBUG_FSENSOR_LOG
 

Firmware/mmu.cpp

@@ -264,7 +264,7 @@ void mmu_loop(void)
 	case S::GetFindaInit:
 		if (mmu_rx_ok() > 0)
 		{
-			fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda); //scan finda from buffer
+			fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda); //scan finda from buffer. MUST BE %hhu!!!
 			mmu_last_finda_response.start();
 			FDEBUG_PRINTF_P(PSTR("MMU => '%dok'\n"), mmu_finda);
 			puts_P(PSTR("MMU - ENABLED"));
@@ -377,7 +377,7 @@ void mmu_loop(void)
         }
 		if (mmu_rx_ok() > 0)
 		{
-			fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda); //scan finda from buffer
+			fscanf_P(uart2io, PSTR("%hhu"), &mmu_finda); //scan finda from buffer. MUST BE %hhu!!!
 			mmu_last_finda_response.start();
 			FDEBUG_PRINTF_P(PSTR("MMU => '%dok'\n"), mmu_finda);
 			//printf_P(PSTR("Eact: %d\n"), int(e_active()));

Firmware/pat9125.c

@@ -188,8 +188,8 @@ uint8_t pat9125_init(void)
 
 	pat9125_wr_reg(PAT9125_RES_X, PAT9125_XRES);
 	pat9125_wr_reg(PAT9125_RES_Y, PAT9125_YRES);
-	fprintf_P(uartout, PSTR("PAT9125_RES_X=%hhu\n"), pat9125_rd_reg(PAT9125_RES_X));
-	fprintf_P(uartout, PSTR("PAT9125_RES_Y=%hhu\n"), pat9125_rd_reg(PAT9125_RES_Y));
+	fprintf_P(uartout, PSTR("PAT9125_RES_X=%u\n"), pat9125_rd_reg(PAT9125_RES_X));
+	fprintf_P(uartout, PSTR("PAT9125_RES_Y=%u\n"), pat9125_rd_reg(PAT9125_RES_Y));
 	return 1;
 }
 

Firmware/tmc2130.cpp

@@ -471,8 +471,8 @@ void tmc2130_setup_chopper(uint8_t axis, uint8_t mres, uint8_t current_h, uint8_
         intpol = 0;
     }
 #endif
-//	DBG(_n("tmc2130_setup_chopper(axis=%hhd, mres=%hhd, curh=%hhd, curr=%hhd\n"), axis, mres, current_h, current_r);
-//	DBG(_n(" toff=%hhd, hstr=%hhd, hend=%hhd, tbl=%hhd\n"), toff, hstrt, hend, tbl);
+//	DBG(_n("tmc2130_setup_chopper(axis=%d, mres=%d, curh=%d, curr=%d\n"), axis, mres, current_h, current_r);
+//	DBG(_n(" toff=%d, hstr=%d, hend=%d, tbl=%d\n"), toff, hstrt, hend, tbl);
 	if (current_r <= 31)
 	{
 		tmc2130_wr_CHOPCONF(axis, toff, hstrt, hend, fd3, 0, rndtf, chm, tbl, 1, 0, 0, 0, mres, intpol, dedge, 0);
@@ -511,7 +511,7 @@ void tmc2130_print_currents()
 
 void tmc2130_set_pwm_ampl(uint8_t axis, uint8_t pwm_ampl)
 {
-//	DBG(_n("tmc2130_set_pwm_ampl(axis=%hhd, pwm_ampl=%hhd\n"), axis, pwm_ampl);
+//	DBG(_n("tmc2130_set_pwm_ampl(axis=%d, pwm_ampl=%d\n"), axis, pwm_ampl);
 	tmc2130_pwm_ampl[axis] = pwm_ampl;
 	if (((axis == 0) || (axis == 1)) && (tmc2130_mode == TMC2130_MODE_SILENT))
 		tmc2130_wr_PWMCONF(axis, tmc2130_pwm_ampl[axis], tmc2130_pwm_grad[axis], tmc2130_pwm_freq[axis], tmc2130_pwm_auto[axis], 0, 0);
@@ -519,7 +519,7 @@ void tmc2130_set_pwm_ampl(uint8_t axis, uint8_t pwm_ampl)
 
 void tmc2130_set_pwm_grad(uint8_t axis, uint8_t pwm_grad)
 {
-//	DBG(_n("tmc2130_set_pwm_grad(axis=%hhd, pwm_grad=%hhd\n"), axis, pwm_grad);
+//	DBG(_n("tmc2130_set_pwm_grad(axis=%d, pwm_grad=%d\n"), axis, pwm_grad);
 	tmc2130_pwm_grad[axis] = pwm_grad;
 	if (((axis == 0) || (axis == 1)) && (tmc2130_mode == TMC2130_MODE_SILENT))
 		tmc2130_wr_PWMCONF(axis, tmc2130_pwm_ampl[axis], tmc2130_pwm_grad[axis], tmc2130_pwm_freq[axis], tmc2130_pwm_auto[axis], 0, 0);
@@ -893,7 +893,7 @@ void tmc2130_set_wave(uint8_t axis, uint8_t amp, uint8_t fac1000)
 {
 // TMC2130 wave compression algorithm
 // optimized for minimal memory requirements
-//	printf_P(PSTR("tmc2130_set_wave %hhd %hhd\n"), axis, fac1000);
+//	printf_P(PSTR("tmc2130_set_wave %d %d\n"), axis, fac1000);
 	if (fac1000 < TMC2130_WAVE_FAC1000_MIN) fac1000 = 0;
 	if (fac1000 > TMC2130_WAVE_FAC1000_MAX) fac1000 = TMC2130_WAVE_FAC1000_MAX;
 	float fac = 0;

Firmware/ultralcd.cpp

@@ -469,7 +469,7 @@ void lcdui_print_percent_done(void)
 			return; //do not also print the percentage
 		}
 	}
-	sprintf_P(per, num?_N("%3hhd"):_N("---"), calc_percent_done());
+	sprintf_P(per, num?_N("%3d"):_N("---"), calc_percent_done());
 	lcd_printf_P(_N("%3S%3s%%"), src, per);
 }
 
@@ -2703,7 +2703,7 @@ void lcd_menu_statistics()
 			"%S:\n"
 			"%18.2fm \n"
 			"%S:\n"
-			"%10ldh %02hhdm %02hhds"
+			"%10ldh %02dm %02ds"
 		    ),
             _i("Filament used"), _met,  ////MSG_FILAMENT_USED c=19
             _i("Print time"), _h, _m, _s);  ////MSG_PRINT_TIME c=19
@@ -2725,7 +2725,7 @@ void lcd_menu_statistics()
 			"%S:\n"
 			"%18.2fm \n"
 			"%S:\n"
-			"%10ldd %02hhdh %02hhdm"
+			"%10ldd %02dh %02dm"
             ),
             _i("Total filament"), _filament_m,  ////MSG_TOTAL_FILAMENT c=19
             _i("Total print time"), _days, _hours, _minutes);  ////MSG_TOTAL_PRINT_TIME c=19