messages translated, readded changing extruder from menu

Firmware/language_all.cpp

@@ -1284,13 +1284,17 @@ const char * const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_LOAD_ALL_EN[] PROGMEM = "Load all";
 const char MSG_LOAD_ALL_CZ[] PROGMEM = "Zavest vse";
+const char MSG_LOAD_ALL_IT[] PROGMEM = "Caricare tutti";
+const char MSG_LOAD_ALL_ES[] PROGMEM = "Intr. todos fil.";
+const char MSG_LOAD_ALL_PL[] PROGMEM = "Zalad. wszystkie";
+const char MSG_LOAD_ALL_DE[] PROGMEM = "Alle laden";
 const char * const MSG_LOAD_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LOAD_ALL_EN,
 	MSG_LOAD_ALL_CZ,
-	MSG_LOAD_ALL_EN,
-	MSG_LOAD_ALL_EN,
-	MSG_LOAD_ALL_EN,
-	MSG_LOAD_ALL_EN
+	MSG_LOAD_ALL_IT,
+	MSG_LOAD_ALL_ES,
+	MSG_LOAD_ALL_PL,
+	MSG_LOAD_ALL_DE
 };
 
 const char MSG_LOAD_EPROM_EN[] PROGMEM = "Load memory";
@@ -1315,46 +1319,62 @@ const char * const MSG_LOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_LOAD_FILAMENT_1_EN[] PROGMEM = "Load filament 1";
 const char MSG_LOAD_FILAMENT_1_CZ[] PROGMEM = "Zavest filament 1";
+const char MSG_LOAD_FILAMENT_1_IT[] PROGMEM = "Caricare fil. 1";
+const char MSG_LOAD_FILAMENT_1_ES[] PROGMEM = "Introducir fil. 1";
+const char MSG_LOAD_FILAMENT_1_PL[] PROGMEM = "Zaladowac fil. 1";
+const char MSG_LOAD_FILAMENT_1_DE[] PROGMEM = "Filament 1 laden";
 const char * const MSG_LOAD_FILAMENT_1_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LOAD_FILAMENT_1_EN,
 	MSG_LOAD_FILAMENT_1_CZ,
-	MSG_LOAD_FILAMENT_1_EN,
-	MSG_LOAD_FILAMENT_1_EN,
-	MSG_LOAD_FILAMENT_1_EN,
-	MSG_LOAD_FILAMENT_1_EN
+	MSG_LOAD_FILAMENT_1_IT,
+	MSG_LOAD_FILAMENT_1_ES,
+	MSG_LOAD_FILAMENT_1_PL,
+	MSG_LOAD_FILAMENT_1_DE
 };
 
 const char MSG_LOAD_FILAMENT_2_EN[] PROGMEM = "Load filament 2";
 const char MSG_LOAD_FILAMENT_2_CZ[] PROGMEM = "Zavest filament 2";
+const char MSG_LOAD_FILAMENT_2_IT[] PROGMEM = "Caricare fil. 2";
+const char MSG_LOAD_FILAMENT_2_ES[] PROGMEM = "Introducir fil. 2";
+const char MSG_LOAD_FILAMENT_2_PL[] PROGMEM = "Zaladowac fil. 2";
+const char MSG_LOAD_FILAMENT_2_DE[] PROGMEM = "Filament 2 laden";
 const char * const MSG_LOAD_FILAMENT_2_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LOAD_FILAMENT_2_EN,
 	MSG_LOAD_FILAMENT_2_CZ,
-	MSG_LOAD_FILAMENT_2_EN,
-	MSG_LOAD_FILAMENT_2_EN,
-	MSG_LOAD_FILAMENT_2_EN,
-	MSG_LOAD_FILAMENT_2_EN
+	MSG_LOAD_FILAMENT_2_IT,
+	MSG_LOAD_FILAMENT_2_ES,
+	MSG_LOAD_FILAMENT_2_PL,
+	MSG_LOAD_FILAMENT_2_DE
 };
 
 const char MSG_LOAD_FILAMENT_3_EN[] PROGMEM = "Load filament 3";
 const char MSG_LOAD_FILAMENT_3_CZ[] PROGMEM = "Zavest filament 3";
+const char MSG_LOAD_FILAMENT_3_IT[] PROGMEM = "Caricare fil. 3";
+const char MSG_LOAD_FILAMENT_3_ES[] PROGMEM = "Introducir fil. 3";
+const char MSG_LOAD_FILAMENT_3_PL[] PROGMEM = "Zaladowac fil. 3";
+const char MSG_LOAD_FILAMENT_3_DE[] PROGMEM = "Filament 3 laden";
 const char * const MSG_LOAD_FILAMENT_3_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LOAD_FILAMENT_3_EN,
 	MSG_LOAD_FILAMENT_3_CZ,
-	MSG_LOAD_FILAMENT_3_EN,
-	MSG_LOAD_FILAMENT_3_EN,
-	MSG_LOAD_FILAMENT_3_EN,
-	MSG_LOAD_FILAMENT_3_EN
+	MSG_LOAD_FILAMENT_3_IT,
+	MSG_LOAD_FILAMENT_3_ES,
+	MSG_LOAD_FILAMENT_3_PL,
+	MSG_LOAD_FILAMENT_3_DE
 };
 
 const char MSG_LOAD_FILAMENT_4_EN[] PROGMEM = "Load filament 4";
 const char MSG_LOAD_FILAMENT_4_CZ[] PROGMEM = "Zavest filament 4";
+const char MSG_LOAD_FILAMENT_4_IT[] PROGMEM = "Caricare fil. 4";
+const char MSG_LOAD_FILAMENT_4_ES[] PROGMEM = "Introducir fil. 4";
+const char MSG_LOAD_FILAMENT_4_PL[] PROGMEM = "Zaladowac fil. 4";
+const char MSG_LOAD_FILAMENT_4_DE[] PROGMEM = "Filament 4 laden";
 const char * const MSG_LOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LOAD_FILAMENT_4_EN,
 	MSG_LOAD_FILAMENT_4_CZ,
-	MSG_LOAD_FILAMENT_4_EN,
-	MSG_LOAD_FILAMENT_4_EN,
-	MSG_LOAD_FILAMENT_4_EN,
-	MSG_LOAD_FILAMENT_4_EN
+	MSG_LOAD_FILAMENT_4_IT,
+	MSG_LOAD_FILAMENT_4_ES,
+	MSG_LOAD_FILAMENT_4_PL,
+	MSG_LOAD_FILAMENT_4_DE
 };
 
 const char MSG_LOOSE_PULLEY_EN[] PROGMEM = "Loose pulley";
@@ -1362,7 +1382,7 @@ const char MSG_LOOSE_PULLEY_CZ[] PROGMEM = "Uvolnena remenicka";
 const char MSG_LOOSE_PULLEY_IT[] PROGMEM = "Puleggia lenta";
 const char MSG_LOOSE_PULLEY_ES[] PROGMEM = "Polea suelta";
 const char MSG_LOOSE_PULLEY_PL[] PROGMEM = "Kolo pasowe";
-const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Lose Riemenschei.";
+const char MSG_LOOSE_PULLEY_DE[] PROGMEM = "Lose Riemenscheibe";
 const char * const MSG_LOOSE_PULLEY_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LOOSE_PULLEY_EN,
 	MSG_LOOSE_PULLEY_CZ,
@@ -1693,7 +1713,7 @@ const char MSG_NOT_LOADED_CZ[] PROGMEM = "Filament nezaveden";
 const char MSG_NOT_LOADED_IT[] PROGMEM = "Fil. non caricato";
 const char MSG_NOT_LOADED_ES[] PROGMEM = "Fil. no introducido";
 const char MSG_NOT_LOADED_PL[] PROGMEM = "Brak filamentu";
-const char MSG_NOT_LOADED_DE[] PROGMEM = "Filam. nicht geladen";
+const char MSG_NOT_LOADED_DE[] PROGMEM = "Fil. nicht geladen";
 const char * const MSG_NOT_LOADED_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_NOT_LOADED_EN,
 	MSG_NOT_LOADED_CZ,
@@ -1951,15 +1971,18 @@ const char * const MSG_PREHEAT_NOZZLE_LANG_TABLE[LANG_NUM] PROGMEM = {
 };
 
 const char MSG_PREPARE_FILAMENT_EN[] PROGMEM = "Prepare new filament";
+const char MSG_PREPARE_FILAMENT_CZ[] PROGMEM = "Pripravte filament";
+const char MSG_PREPARE_FILAMENT_IT[] PROGMEM = "Preparare filamento";
 const char MSG_PREPARE_FILAMENT_ES[] PROGMEM = "Preparar filamento";
 const char MSG_PREPARE_FILAMENT_PL[] PROGMEM = "Przygotuj filament";
+const char MSG_PREPARE_FILAMENT_DE[] PROGMEM = "Filam. bereithalten";
 const char * const MSG_PREPARE_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_PREPARE_FILAMENT_EN,
-	MSG_PREPARE_FILAMENT_EN,
-	MSG_PREPARE_FILAMENT_EN,
+	MSG_PREPARE_FILAMENT_CZ,
+	MSG_PREPARE_FILAMENT_IT,
 	MSG_PREPARE_FILAMENT_ES,
 	MSG_PREPARE_FILAMENT_PL,
-	MSG_PREPARE_FILAMENT_EN
+	MSG_PREPARE_FILAMENT_DE
 };
 
 const char MSG_PRESS_EN[] PROGMEM = "and press the knob";
@@ -2123,7 +2146,7 @@ const char MSG_RESUMING_PRINT_CZ[] PROGMEM = "Obnovovani tisku";
 const char MSG_RESUMING_PRINT_IT[] PROGMEM = "Stampa in ripresa";
 const char MSG_RESUMING_PRINT_ES[] PROGMEM = "Reanudar impresion";
 const char MSG_RESUMING_PRINT_PL[] PROGMEM = "Wznawianie druku";
-const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck weitergehen";
+const char MSG_RESUMING_PRINT_DE[] PROGMEM = "Druck fortsetzen";
 const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_RESUMING_PRINT_EN,
 	MSG_RESUMING_PRINT_CZ,
@@ -2637,7 +2660,7 @@ const char MSG_SET_TEMPERATURE_CZ[] PROGMEM = "Nastavte teplotu:";
 const char MSG_SET_TEMPERATURE_IT[] PROGMEM = "Imposta temperatura";
 const char MSG_SET_TEMPERATURE_ES[] PROGMEM = "Establecer temp.:";
 const char MSG_SET_TEMPERATURE_PL[] PROGMEM = "Ustawic temperature";
-const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp. einsetzen";
+const char MSG_SET_TEMPERATURE_DE[] PROGMEM = "Temp. einstellen:";
 const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SET_TEMPERATURE_EN,
 	MSG_SET_TEMPERATURE_CZ,
@@ -2919,7 +2942,7 @@ const char MSG_TEMP_CALIBRATION_DONE_CZ[] PROGMEM = "Teplotni kalibrace dokoncen
 const char MSG_TEMP_CALIBRATION_DONE_IT[] PROGMEM = "Taratura temperatura terminata. Fare click per continuare.";
 const char MSG_TEMP_CALIBRATION_DONE_ES[] PROGMEM = "Calibracon temperatura terminada. Presionar para continuar.";
 const char MSG_TEMP_CALIBRATION_DONE_PL[] PROGMEM = "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem";
-const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Temp. Kalibrierung fertig. Klicken um weiter zu gehen.";
+const char MSG_TEMP_CALIBRATION_DONE_DE[] PROGMEM = "Temp.Kalibrierung fertig. Klicken um fortzusetzen.";
 const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_DONE_EN,
 	MSG_TEMP_CALIBRATION_DONE_CZ,
@@ -2934,7 +2957,7 @@ const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [OFF]";
 const char MSG_TEMP_CALIBRATION_OFF_IT[] PROGMEM = "Cal. temp. [OFF]";
 const char MSG_TEMP_CALIBRATION_OFF_ES[] PROGMEM = "Cal. temp. [OFF]";
 const char MSG_TEMP_CALIBRATION_OFF_PL[] PROGMEM = "Ciepl. kal. [OFF]";
-const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "Temp. Kal. [OFF]";
+const char MSG_TEMP_CALIBRATION_OFF_DE[] PROGMEM = "Temp. Kal. [AUS]";
 const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_OFF_EN,
 	MSG_TEMP_CALIBRATION_OFF_CZ,
@@ -2949,7 +2972,7 @@ const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [ON]";
 const char MSG_TEMP_CALIBRATION_ON_IT[] PROGMEM = "Cal. temp. [ON]";
 const char MSG_TEMP_CALIBRATION_ON_ES[] PROGMEM = "Cal. temp. [ON]";
 const char MSG_TEMP_CALIBRATION_ON_PL[] PROGMEM = "Ciepl. kal. [ON]";
-const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "Temp. Kal. [ON]";
+const char MSG_TEMP_CALIBRATION_ON_DE[] PROGMEM = "Temp. Kal. [EIN]";
 const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_ON_EN,
 	MSG_TEMP_CALIBRATION_ON_CZ,
@@ -3018,13 +3041,17 @@ const char * const MSG_UNLOADING_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_UNLOAD_ALL_EN[] PROGMEM = "Unload all";
 const char MSG_UNLOAD_ALL_CZ[] PROGMEM = "Vyjmout vse";
+const char MSG_UNLOAD_ALL_IT[] PROGMEM = "Rilasciare tutti";
+const char MSG_UNLOAD_ALL_ES[] PROGMEM = "Soltar todos fil.";
+const char MSG_UNLOAD_ALL_PL[] PROGMEM = "Wyjac wszystkie";
+const char MSG_UNLOAD_ALL_DE[] PROGMEM = "Alles entladen";
 const char * const MSG_UNLOAD_ALL_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_UNLOAD_ALL_EN,
 	MSG_UNLOAD_ALL_CZ,
-	MSG_UNLOAD_ALL_EN,
-	MSG_UNLOAD_ALL_EN,
-	MSG_UNLOAD_ALL_EN,
-	MSG_UNLOAD_ALL_EN
+	MSG_UNLOAD_ALL_IT,
+	MSG_UNLOAD_ALL_ES,
+	MSG_UNLOAD_ALL_PL,
+	MSG_UNLOAD_ALL_DE
 };
 
 const char MSG_UNLOAD_FILAMENT_EN[] PROGMEM = "Unload filament";
@@ -3044,46 +3071,62 @@ const char * const MSG_UNLOAD_FILAMENT_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_UNLOAD_FILAMENT_1_EN[] PROGMEM = "Unload filament 1";
 const char MSG_UNLOAD_FILAMENT_1_CZ[] PROGMEM = "Vyjmout filam. 1";
+const char MSG_UNLOAD_FILAMENT_1_IT[] PROGMEM = "Rilasciare fil. 1";
+const char MSG_UNLOAD_FILAMENT_1_ES[] PROGMEM = "Soltar fil. 1";
+const char MSG_UNLOAD_FILAMENT_1_PL[] PROGMEM = "Wyjac filament 1";
+const char MSG_UNLOAD_FILAMENT_1_DE[] PROGMEM = "Filam. 1 entladen";
 const char * const MSG_UNLOAD_FILAMENT_1_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_UNLOAD_FILAMENT_1_EN,
 	MSG_UNLOAD_FILAMENT_1_CZ,
-	MSG_UNLOAD_FILAMENT_1_EN,
-	MSG_UNLOAD_FILAMENT_1_EN,
-	MSG_UNLOAD_FILAMENT_1_EN,
-	MSG_UNLOAD_FILAMENT_1_EN
+	MSG_UNLOAD_FILAMENT_1_IT,
+	MSG_UNLOAD_FILAMENT_1_ES,
+	MSG_UNLOAD_FILAMENT_1_PL,
+	MSG_UNLOAD_FILAMENT_1_DE
 };
 
 const char MSG_UNLOAD_FILAMENT_2_EN[] PROGMEM = "Unload filament 2";
 const char MSG_UNLOAD_FILAMENT_2_CZ[] PROGMEM = "Vyjmout filam. 2";
+const char MSG_UNLOAD_FILAMENT_2_IT[] PROGMEM = "Rilasciare fil. 1";
+const char MSG_UNLOAD_FILAMENT_2_ES[] PROGMEM = "Soltar fil. 2";
+const char MSG_UNLOAD_FILAMENT_2_PL[] PROGMEM = "Wyjac filament 2";
+const char MSG_UNLOAD_FILAMENT_2_DE[] PROGMEM = "Filam. 2 entladen";
 const char * const MSG_UNLOAD_FILAMENT_2_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_UNLOAD_FILAMENT_2_EN,
 	MSG_UNLOAD_FILAMENT_2_CZ,
-	MSG_UNLOAD_FILAMENT_2_EN,
-	MSG_UNLOAD_FILAMENT_2_EN,
-	MSG_UNLOAD_FILAMENT_2_EN,
-	MSG_UNLOAD_FILAMENT_2_EN
+	MSG_UNLOAD_FILAMENT_2_IT,
+	MSG_UNLOAD_FILAMENT_2_ES,
+	MSG_UNLOAD_FILAMENT_2_PL,
+	MSG_UNLOAD_FILAMENT_2_DE
 };
 
 const char MSG_UNLOAD_FILAMENT_3_EN[] PROGMEM = "Unload filament 3";
 const char MSG_UNLOAD_FILAMENT_3_CZ[] PROGMEM = "Vyjmout filam. 3";
+const char MSG_UNLOAD_FILAMENT_3_IT[] PROGMEM = "Rilasciare fil. 1";
+const char MSG_UNLOAD_FILAMENT_3_ES[] PROGMEM = "Soltar fil. 3";
+const char MSG_UNLOAD_FILAMENT_3_PL[] PROGMEM = "Wyjac filament 3";
+const char MSG_UNLOAD_FILAMENT_3_DE[] PROGMEM = "Filam. 3 entladen";
 const char * const MSG_UNLOAD_FILAMENT_3_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_UNLOAD_FILAMENT_3_EN,
 	MSG_UNLOAD_FILAMENT_3_CZ,
-	MSG_UNLOAD_FILAMENT_3_EN,
-	MSG_UNLOAD_FILAMENT_3_EN,
-	MSG_UNLOAD_FILAMENT_3_EN,
-	MSG_UNLOAD_FILAMENT_3_EN
+	MSG_UNLOAD_FILAMENT_3_IT,
+	MSG_UNLOAD_FILAMENT_3_ES,
+	MSG_UNLOAD_FILAMENT_3_PL,
+	MSG_UNLOAD_FILAMENT_3_DE
 };
 
 const char MSG_UNLOAD_FILAMENT_4_EN[] PROGMEM = "Unload filament 4";
 const char MSG_UNLOAD_FILAMENT_4_CZ[] PROGMEM = "Vyjmout filam. 4";
+const char MSG_UNLOAD_FILAMENT_4_IT[] PROGMEM = "Rilasciare fil. 1";
+const char MSG_UNLOAD_FILAMENT_4_ES[] PROGMEM = "Soltar fil. 4";
+const char MSG_UNLOAD_FILAMENT_4_PL[] PROGMEM = "Wyjac filament 4";
+const char MSG_UNLOAD_FILAMENT_4_DE[] PROGMEM = "Filam. 4 entladen";
 const char * const MSG_UNLOAD_FILAMENT_4_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_UNLOAD_FILAMENT_4_EN,
 	MSG_UNLOAD_FILAMENT_4_CZ,
-	MSG_UNLOAD_FILAMENT_4_EN,
-	MSG_UNLOAD_FILAMENT_4_EN,
-	MSG_UNLOAD_FILAMENT_4_EN,
-	MSG_UNLOAD_FILAMENT_4_EN
+	MSG_UNLOAD_FILAMENT_4_IT,
+	MSG_UNLOAD_FILAMENT_4_ES,
+	MSG_UNLOAD_FILAMENT_4_PL,
+	MSG_UNLOAD_FILAMENT_4_DE
 };
 
 const char MSG_USB_PRINTING_EN[] PROGMEM = "USB printing  ";

Firmware/language_cz.h

@@ -291,4 +291,5 @@
 #define MSG_TEMP_CALIBRATION							"Tepl. kal.          "
 #define MSG_TEMP_CALIBRATION_DONE						"Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka."
 #define MSG_TEMP_CALIBRATION_ON							"Tepl. kal. [ON]"
-#define MSG_TEMP_CALIBRATION_OFF						"Tepl. kal. [OFF]"
+#define MSG_TEMP_CALIBRATION_OFF						"Tepl. kal. [OFF]"
+#define MSG_PREPARE_FILAMENT							"Pripravte filament"

Firmware/language_en.h

@@ -173,9 +173,9 @@
 #define MSG_SELFTEST_ENDSTOPS				"Endstops"
 #define MSG_SELFTEST_MOTOR					"Motor"
 #define MSG_SELFTEST_ENDSTOP				"Endstop"
-#define MSG_SELFTEST_ENDSTOP_NOTHIT			"Endstop not hit"
+#define(length=20,lines=1) MSG_SELFTEST_ENDSTOP_NOTHIT			"Endstop not hit"
 #define MSG_SELFTEST_OK						"Self test OK"
-#define MSG_LOOSE_PULLEY					"Loose pulley"
+#define(length=20,lines=1) MSG_LOOSE_PULLEY					"Loose pulley"
 
 #define(length=20) MSG_SELFTEST_FAN					"Fan test";
 #define(length=20) MSG_SELFTEST_COOLING_FAN			"Front print fan?";
@@ -203,7 +203,7 @@
 #define MSG_HOMEYZ_PROGRESS                 "Calibrating Z"
 #define MSG_HOMEYZ_DONE		                "Calibration done"
 
-#define MSG_SHOW_END_STOPS					"Show end stops"
+#define(length=17,lines=1) MSG_SHOW_END_STOPS					"Show end stops"
 #define MSG_CALIBRATE_BED					"Calibrate XYZ"
 #define MSG_CALIBRATE_BED_RESET				"Reset XYZ calibr."
 
@@ -261,14 +261,14 @@
 #define(length=20, lines=8) MSG_CLEAN_NOZZLE_E				"E calibration finished. Please clean the nozzle. Click when done."
 #define(length=20, lines=3) MSG_WAITING_TEMP				"Waiting for nozzle and bed cooling"
 #define(length=20, lines=2) MSG_FILAMENT_CLEAN				"Is color clear?"
-#define(lenght=20) MSG_UNLOADING_FILAMENT			"Unloading filament"
+#define(lenght=18, lines=1) MSG_UNLOADING_FILAMENT			"Unloading filament"
 #define(length=20, lines=8) MSG_PAPER						"Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
 
 #define MSG_BED_CORRECTION_MENU									"Bed level correct"
-#define MSG_BED_CORRECTION_LEFT									"Left side  um"
-#define MSG_BED_CORRECTION_RIGHT								"Right side um"
-#define MSG_BED_CORRECTION_FRONT								"Front side um"
-#define MSG_BED_CORRECTION_REAR									"Rear side  um"
+#define(length=14,lines=1) MSG_BED_CORRECTION_LEFT								"Left side [um]"
+#define(length=14,lines=1) MSG_BED_CORRECTION_RIGHT								"Right side[um]"
+#define(length=14,lines=1) MSG_BED_CORRECTION_FRONT								"Front side[um]"
+#define(length=14,lines=1) MSG_BED_CORRECTION_REAR								"Rear side [um]"
 #define MSG_BED_CORRECTION_RESET								"Reset"
 
 #define MSG_MESH_BED_LEVELING									"Mesh Bed Leveling"

Firmware/language_es.h

@@ -272,4 +272,18 @@
 #define MSG_TEMP_CALIBRATION_ON							"Cal. temp. [ON]"
 #define MSG_TEMP_CALIBRATION_OFF						"Cal. temp. [OFF]"
 
+#define MSG_PREPARE_FILAMENT							"Preparar filamento"
+
+
+
+#define MSG_LOAD_ALL									"Intr. todos fil."
+#define MSG_LOAD_FILAMENT_1								"Introducir fil. 1"
+#define MSG_LOAD_FILAMENT_2								"Introducir fil. 2"
+#define MSG_LOAD_FILAMENT_3								"Introducir fil. 3"
+#define MSG_LOAD_FILAMENT_4								"Introducir fil. 4"
+#define MSG_UNLOAD_FILAMENT_1							"Soltar fil. 1"
+#define MSG_UNLOAD_FILAMENT_2							"Soltar fil. 2"
+#define MSG_UNLOAD_FILAMENT_3							"Soltar fil. 3"
+#define MSG_UNLOAD_FILAMENT_4							"Soltar fil. 4"
+#define MSG_UNLOAD_ALL									"Soltar todos fil."
 #define MSG_PREPARE_FILAMENT							"Preparar filamento"

Firmware/language_it.h

@@ -265,4 +265,16 @@
 #define MSG_TEMP_CALIBRATION							"Cal. temp.          "
 #define MSG_TEMP_CALIBRATION_DONE						"Taratura temperatura terminata. Fare click per continuare."
 #define MSG_TEMP_CALIBRATION_ON							"Cal. temp. [ON]"
-#define MSG_TEMP_CALIBRATION_OFF						"Cal. temp. [OFF]"
+#define MSG_TEMP_CALIBRATION_OFF						"Cal. temp. [OFF]"
+
+#define MSG_LOAD_ALL									"Caricare tutti"
+#define MSG_LOAD_FILAMENT_1								"Caricare fil. 1"
+#define MSG_LOAD_FILAMENT_2								"Caricare fil. 2"
+#define MSG_LOAD_FILAMENT_3								"Caricare fil. 3"
+#define MSG_LOAD_FILAMENT_4								"Caricare fil. 4"
+#define MSG_UNLOAD_FILAMENT_1							"Rilasciare fil. 1"
+#define MSG_UNLOAD_FILAMENT_2							"Rilasciare fil. 1"
+#define MSG_UNLOAD_FILAMENT_3							"Rilasciare fil. 1"
+#define MSG_UNLOAD_FILAMENT_4							"Rilasciare fil. 1"
+#define MSG_UNLOAD_ALL									"Rilasciare tutti"
+#define MSG_PREPARE_FILAMENT							"Preparare filamento"

Firmware/language_pl.h

@@ -277,4 +277,16 @@
 #define MSG_TEMP_CALIBRATION_DONE								"Cieplna kalibracja zakonczona. Kontynuuj przyciskiem"
 #define MSG_TEMP_CALIBRATION_ON									"Ciepl. kal. [ON]"
 #define MSG_TEMP_CALIBRATION_OFF								"Ciepl. kal. [OFF]"
+#define MSG_PREPARE_FILAMENT									"Przygotuj filament"
+
+#define MSG_LOAD_ALL											"Zalad. wszystkie"
+#define MSG_LOAD_FILAMENT_1										"Zaladowac fil. 1"
+#define MSG_LOAD_FILAMENT_2										"Zaladowac fil. 2"
+#define MSG_LOAD_FILAMENT_3										"Zaladowac fil. 3"
+#define MSG_LOAD_FILAMENT_4										"Zaladowac fil. 4"
+#define MSG_UNLOAD_FILAMENT_1									"Wyjac filament 1"
+#define MSG_UNLOAD_FILAMENT_2									"Wyjac filament 2"
+#define MSG_UNLOAD_FILAMENT_3									"Wyjac filament 3"
+#define MSG_UNLOAD_FILAMENT_4									"Wyjac filament 4"
+#define MSG_UNLOAD_ALL											"Wyjac wszystkie"
 #define MSG_PREPARE_FILAMENT									"Przygotuj filament"

Firmware/ultralcd.cpp

@@ -520,7 +520,7 @@ void lcd_commands()
 	char cmd1[25];
 	if (lcd_commands_type == LCD_COMMAND_LONG_PAUSE)
 	{
-		if(lcd_commands_step == 0) { 
+		if(lcd_commands_step == 0) {
 			card.pauseSDPrint();
 			lcd_setstatuspgm(MSG_FINISHING_MOVEMENTS);
 			lcdDrawUpdate = 3;
@@ -3301,7 +3301,7 @@ static void fil_unload_menu()
 	END_MENU();
 }
 
-/*static void change_extr_menu(){
+static void change_extr_menu(){
 	START_MENU();
 	MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
 	MENU_ITEM(function, PSTR("Extruder 1"), extr_change_0);
@@ -3310,7 +3310,7 @@ static void fil_unload_menu()
 	MENU_ITEM(function, PSTR("Extruder 4"), extr_change_3);
 
 	END_MENU();
-}*/
+}
 
 #endif
 
@@ -3578,7 +3578,7 @@ static void lcd_main_menu()
 	#ifdef SNMM
 	MENU_ITEM(submenu, MSG_LOAD_FILAMENT, fil_load_menu);
 	MENU_ITEM(submenu, MSG_UNLOAD_FILAMENT, fil_unload_menu);
-	//MENU_ITEM(submenu, MSG_CHANGE_EXTR, change_extr_menu);
+	MENU_ITEM(submenu, MSG_CHANGE_EXTR, change_extr_menu);
 	#endif
 	MENU_ITEM(submenu, MSG_SETTINGS, lcd_settings_menu);
     if(!isPrintPaused) MENU_ITEM(submenu, MSG_MENU_CALIBRATION, lcd_calibration_menu);