Add Slovanian

Firmware/config.h

@@ -67,6 +67,7 @@
 #define COMMUNITY_LANG_GROUP1_NL // Community Dutch language
 #define COMMUNITY_LANG_GROUP1_SV // Community Swedish language
 #define COMMUNITY_LANG_GROUP1_DA // Community Danish language
+#define COMMUNITY_LANG_GROUP1_SL // Community Slovanian language
 //#define COMMUNITY_LANG_GROUP1_QR // Community new language //..use this as a template and replace 'QR'
 #endif
 

Firmware/language.c

@@ -221,6 +221,9 @@ const char* lang_get_name_by_code(uint16_t code)
 #ifdef COMMUNITY_LANG_GROUP1_DA
 	case LANG_CODE_DA: return _n("Dansk"); //community Swedish contribution
 #endif // COMMUNITY_LANG_GROUP1_DA
+#ifdef COMMUNITY_LANG_GROUP1_SL
+	case LANG_CODE_SL: return _n("Slovenscina"); //community Slovanian contribution
+#endif // COMMUNITY_LANG_GROUP1_SL
 
 //Use the 3 lines below as a template and replace 'QR' and 'New language'
 //#ifdef COMMUNITY_LANG_GROUP1_QR 

Firmware/language.h

@@ -104,6 +104,9 @@ typedef struct
 #ifdef COMMUNITY_LANG_GROUP1_DA
 #define LANG_CODE_DA 0x6461 //!<'da'
 #endif // COMMUNITY_LANG_GROUP1_DA
+#ifdef COMMUNITY_LANG_GROUP1_SL
+#define LANG_CODE_SL 0x736C //!<'sl'
+#endif // COMMUNITY_LANG_GROUP1_SL
 //Use the 3 lines below as a template and replace 'QR', '0X7172' and 'qr'
 //#ifdef COMMUNITY_LANG_GROUP1_QR
 //#define LANG_CODE_QR 0x7172 //!<'qr'

lang/lang-build.sh

@@ -59,6 +59,8 @@ lang_code_hex_data()
   *sv*) echo '\x76\x73' ;;
 #Danish
   *da*) echo '\x61\x64' ;;
+#Slovanian
+  *sl*) echo '\x6C\x73' ;;
 #Use the 2 lines below as a template and replace 'qr' and `\x71\x72`
 ##New language
 #  *qr*) echo '\x71\x72' ;;

lang/lang-check.py

@@ -246,7 +246,7 @@ def main():
         usage="%(prog)s lang")
     parser.add_argument(
         "lang", nargs='?', default="en", type=str,
-        help="Check lang file (en|cs|da|de|es|fr|nl|it|pl|sv)")
+        help="Check lang file (en|cs|da|de|es|fr|nl|it|pl|sl|sv)")
     parser.add_argument(
         "--no-warning", action="store_true",
         help="Disable warnings")

lang/lang-export.sh

@@ -73,6 +73,8 @@ else
    *sv*) echo "Swedish" ;;
 #Danish
    *da*) echo "Danish" ;;
+#Slovanian
+   *sl*) echo "Slovanian" ;;
 #Use the 2 lines below as a template and replace 'qr' and 'New language'
 ##New language
 #   *qr*) echo "New language" ;;

lang/lang-import.sh

@@ -202,6 +202,15 @@ sed -i 's/\xc3\x85/Aa/g' $LNG'_filtered.po'
 sed -i 's/\xc3\xA5/aa/g' $LNG'_filtered.po'
 fi
 
+if [ "$LGN" = "sl" ]; then
+ #replace 'ë' with 'e'
+ sed -i 's/\xc3\xab/e/g' $LNG'_filtered.po'
+ #replace 'ä' with 'a' (left)
+ sed -i 's/\xc3\xa4/a/g' $LNG'_filtered.po'
+ #replace 'é' with 'e'
+ sed -i 's/\xc3\xa9/e/g' $LNG'_filtered.po'
+fi
+
 #replace in polish translation
 #if [ "$LNG" = "pl" ]; then
 #fi

lang/lang_en_sl.txt

@@ -0,0 +1,1403 @@
+#MSG_IR_03_OR_OLDER c=18
+" 0.3 or older"
+"\x00"
+
+#MSG_FS_V_03_OR_OLDER c=18
+"FS v0.3 or older"
+"\x00"
+
+#MSG_IR_04_OR_NEWER c=18
+" 0.4 or newer"
+"\x00"
+
+#MSG_FS_V_04_OR_NEWER c=18
+"FS v0.4 or newer"
+"\x00"
+
+#MSG_IR_UNKNOWN c=18
+"unknown state"
+"\x00"
+
+#MSG_MEASURED_OFFSET c=20
+"[0;0] point offset"
+"\x00"
+
+#MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
+"Crash detection can\x0abe turned on only in\x0aNormal mode"
+"\x00"
+
+#MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
+"WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
+"\x00"
+
+#MSG_BABYSTEPPING_Z c=15
+"Adjusting Z:"
+"\x00"
+
+#MSG_SELFTEST_CHECK_ALLCORRECT c=20
+"All correct"
+"\x00"
+
+#MSG_WIZARD_DONE c=20 r=8
+"All is done. Happy printing!"
+"\x00"
+
+#MSG_AMBIENT c=14
+"Ambient"
+"\x00"
+
+#MSG_AUTO c=6
+"Auto"
+"\x00"
+
+#MSG_PRESS c=20 r=2
+"and press the knob"
+"\x00"
+
+#MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+"Are left and right Z~carriages all up?"
+"\x00"
+
+#MSG_AUTO_HOME c=18
+"Auto home"
+"\x00"
+
+#MSG_AUTOLOAD_FILAMENT c=18
+"AutoLoad filament"
+"\x00"
+
+#MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
+"Autoloading filament available only when filament sensor is turned on..."
+"\x00"
+
+#MSG_AUTOLOADING_ENABLED c=20 r=4
+"Autoloading filament is active, just press the knob and insert filament..."
+"\x00"
+
+#MSG_SELFTEST_AXIS_LENGTH c=20
+"Axis length"
+"\x00"
+
+#MSG_SELFTEST_AXIS c=16
+"Axis"
+"\x00"
+
+#MSG_SELFTEST_BEDHEATER c=20
+"Bed/Heater"
+"\x00"
+
+#MSG_BED_DONE c=20
+"Bed done"
+"\x00"
+
+#MSG_BED_HEATING c=20
+"Bed Heating"
+"\x00"
+
+#MSG_BED_CORRECTION_MENU c=18
+"Bed level correct"
+"\x00"
+
+#MSG_BELTTEST c=18
+"Belt test"
+"\x00"
+
+#MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
+"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for reset."
+"\x00"
+
+#MSG_BRIGHT c=6
+"Bright"
+"\x00"
+
+#MSG_BRIGHTNESS c=18
+"Brightness"
+"\x00"
+
+#MSG_BED c=13
+"Bed"
+"\x00"
+
+#MSG_BELT_STATUS c=18
+"Belt status"
+"\x00"
+
+#MSG_RECOVER_PRINT c=20 r=2
+"Blackout occurred. Recover print?"
+"\x00"
+
+#MSG_CALIBRATING_HOME c=20
+"Calibrating home"
+"\x00"
+
+#MSG_CALIBRATE_BED c=18
+"Calibrate XYZ"
+"\x00"
+
+#MSG_HOMEYZ c=18
+"Calibrate Z"
+"\x00"
+
+#MSG_CALIBRATE_PINDA c=17
+"Calibrate"
+"\x00"
+
+#MSG_CANCEL2 c=10
+">Cancel"
+"\x00"
+
+#MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
+"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+"\x00"
+
+#MSG_CALIBRATE_Z_AUTO c=20 r=2
+"Calibrating Z"
+"\x00"
+
+#MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
+"Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+"\x00"
+
+#MSG_HOMEYZ_DONE c=20
+"Calibration done"
+"\x00"
+
+#MSG_MENU_CALIBRATION c=18
+"Calibration"
+"\x00"
+
+#MSG_SD_REMOVED c=20
+"Card removed"
+"\x00"
+
+#MSG_CHECKING_FILE c=17
+"Checking file"
+"\x00"
+
+#MSG_NOT_COLOR c=19
+"Color not correct"
+"\x00"
+
+#MSG_COOLDOWN c=18
+"Cooldown"
+"\x00"
+
+#MSG_COPY_SEL_LANG c=20 r=3
+"Copy selected language?"
+"\x00"
+
+#MSG_CRASHDETECT c=13
+"Crash det."
+"\x00"
+
+#MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+"Choose a filament for the First Layer Calibration and select it in the on-screen menu."
+"\x00"
+
+#MSG_CRASH_DETECTED c=20
+"Crash detected."
+"\x00"
+
+#MSG_CRASH_RESUME c=20 r=3
+"Crash detected. Resume print?"
+"\x00"
+
+#MSG_CRASH c=7
+"Crash"
+"\x00"
+
+#MSG_CURRENT c=19
+"Current"
+"\x00"
+
+#MSG_DATE c=17
+"Date:"
+"\x00"
+
+#MSG_COMMUNITY_MADE c=18
+"Community made"
+"\x00"
+
+#MSG_DISABLE_STEPPERS c=18
+"Disable steppers"
+"\x00"
+
+#MSG_BABYSTEP_Z_NOT_SET c=20 r=12
+"Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
+"\x00"
+
+#MSG_FS_CONTINUE c=5
+"Cont."
+"\x00"
+
+#MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
+"Do you want to repeat last step to readjust distance between nozzle and heatbed?"
+"\x00"
+
+#MSG_EXTRUDER_CORRECTION c=13
+"E-correct:"
+"\x00"
+
+#MSG_EJECT_FILAMENT c=16
+"Eject filament"
+"\x00"
+
+#MSG_EJECTING_FILAMENT c=20
+"Ejecting filament"
+"\x00"
+
+#MSG_SELFTEST_ENDSTOP_NOTHIT c=20
+"Endstop not hit"
+"\x00"
+
+#MSG_SELFTEST_ENDSTOP c=16
+"Endstop"
+"\x00"
+
+#MSG_SELFTEST_ENDSTOPS c=20
+"Endstops"
+"\x00"
+
+#MSG_STACK_ERROR c=20 r=4
+"Error - static memory has been overwritten"
+"\x00"
+
+#MSG_CUT_FILAMENT c=16
+"Cut filament"
+"\x00"
+
+#MSG_CUTTER c=9
+"Cutter"
+"\x00"
+
+#MSG_MMU_CUTTING_FIL c=18
+"Cutting filament"
+"\x00"
+
+#MSG_FSENS_NOT_RESPONDING c=20 r=4
+"ERROR: Filament sensor is not responding, please check connection."
+"\x00"
+
+#MSG_DIM c=6
+"Dim"
+"\x00"
+
+#MSG_ERROR c=10
+"ERROR:"
+"\x00"
+
+#MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
+"Extruder fan:"
+"\x00"
+
+#MSG_INFO_EXTRUDER c=18
+"Extruder info"
+"\x00"
+
+#MSG_EXTRUDER c=17
+"Extruder"
+"\x00"
+
+#MSG_MMU_FAIL_STATS c=18
+"Fail stats MMU"
+"\x00"
+
+#MSG_FSENSOR_AUTOLOAD c=13
+"F. autoload"
+"\x00"
+
+#MSG_FAIL_STATS c=18
+"Fail stats"
+"\x00"
+
+#MSG_FAN_SPEED c=14
+"Fan speed"
+"\x00"
+
+#MSG_SELFTEST_FAN c=20
+"Fan test"
+"\x00"
+
+#MSG_FANS_CHECK c=13
+"Fans check"
+"\x00"
+
+#MSG_FSENSOR c=12
+"Fil. sensor"
+"\x00"
+
+#MSG_FIL_RUNOUTS c=15
+"Fil. runouts"
+"\x00"
+
+#MSG_FILAMENT_CLEAN c=20 r=2
+"Filament extruding & with correct color?"
+"\x00"
+
+#MSG_NOT_LOADED c=19
+"Filament not loaded"
+"\x00"
+
+#MSG_FILAMENT_SENSOR c=20
+"Filament sensor"
+"\x00"
+
+#MSG_FILAMENT_USED c=19
+"Filament used"
+"\x00"
+
+#MSG_PRINT_TIME c=19
+"Print time"
+"\x00"
+
+#MSG_FS_ACTION c=10
+"FS Action"
+"\x00"
+
+#MSG_FILE_INCOMPLETE c=20 r=3
+"File incomplete. Continue anyway?"
+"\x00"
+
+#MSG_FINISHING_MOVEMENTS c=20
+"Finishing movements"
+"\x00"
+
+#MSG_V2_CALIBRATION c=18
+"First layer cal."
+"\x00"
+
+#MSG_WIZARD_SELFTEST c=20 r=8
+"First, I will run the selftest to check most common assembly problems."
+"\x00"
+
+#MSG_MMU_FIX_ISSUE c=20 r=4
+"Fix the issue and then press button on MMU unit."
+"\x00"
+
+#MSG_FLOW c=15
+"Flow"
+"\x00"
+
+#MSG_SELFTEST_COOLING_FAN c=20
+"Front print fan?"
+"\x00"
+
+#MSG_BED_CORRECTION_FRONT c=14
+"Front side[um]"
+"\x00"
+
+#MSG_SELFTEST_FANS c=20
+"Front/left fans"
+"\x00"
+
+#MSG_SELFTEST_HEATERTHERMISTOR c=20
+"Heater/Thermistor"
+"\x00"
+
+#MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
+"Heating disabled by safety timer."
+"\x00"
+
+#MSG_HEATING_COMPLETE c=20
+"Heating done."
+"\x00"
+
+#MSG_HEATING c=20
+"Heating"
+"\x00"
+
+#MSG_WIZARD_WELCOME c=20 r=7
+"Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
+"Zivjo, jaz sem vas originalni tiskalnik Prusa i3. Ali zelite, da vas vodim skozi postopek nastavitve?"
+
+#MSG_FILAMENTCHANGE c=18
+"Change filament"
+"\x00"
+
+#MSG_CHANGE_SUCCESS c=20
+"Change success!"
+"\x00"
+
+#MSG_CORRECTLY c=20
+"Changed correctly?"
+"\x00"
+
+#MSG_SELFTEST_CHECK_BED c=20
+"Checking bed"
+"\x00"
+
+#MSG_SELFTEST_CHECK_ENDSTOPS c=20
+"Checking endstops"
+"\x00"
+
+#MSG_SELFTEST_CHECK_HOTEND c=20
+"Checking hotend"
+"\x00"
+
+#MSG_SELFTEST_CHECK_FSENSOR c=20
+"Checking sensors"
+"\x00"
+
+#MSG_CHECKING_X c=20
+"Checking X axis"
+"\x00"
+
+#MSG_CHECKING_Y c=20
+"Checking Y axis"
+"\x00"
+
+#MSG_SELFTEST_CHECK_Z c=20
+"Checking Z axis"
+"\x00"
+
+#MSG_CHOOSE_EXTRUDER c=20
+"Choose extruder:"
+"\x00"
+
+#MSG_CHOOSE_FILAMENT c=20
+"Choose filament:"
+"\x00"
+
+#MSG_FILAMENT c=17
+"Filament"
+"\x00"
+
+#MSG_WIZARD_XYZ_CAL c=20 r=8
+"I will run xyz calibration now. It will take approx. 12 mins."
+"\x00"
+
+#MSG_WIZARD_Z_CAL c=20 r=8
+"I will run z calibration now."
+"\x00"
+
+#MSG_WATCH c=18
+"Info screen"
+"\x00"
+
+#MSG_INSERT_FILAMENT c=20
+"Insert filament"
+"\x00"
+
+#MSG_FILAMENT_LOADED c=20 r=2
+"Is filament loaded?"
+"\x00"
+
+#MSG_STEEL_SHEET_CHECK c=20 r=2
+"Is steel sheet on heatbed?"
+"\x00"
+
+#MSG_LAST_PRINT_FAILURES c=20
+"Last print failures"
+"\x00"
+
+#MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
+"Hi, I am your Original Prusa i3 printer. I will guide you through a short setup process, in which the Z-axis will be calibrated. Then, you will be ready to print."
+"\x00"
+
+#MSG_ADDITIONAL_SHEETS c=20 r=9
+"If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."
+"\x00"
+
+#MSG_LAST_PRINT c=18
+"Last print"
+"\x00"
+
+#MSG_SELFTEST_EXTRUDER_FAN c=20
+"Left hotend fan?"
+"\x00"
+
+#MSG_LEFT c=10
+"Left"
+"\x00"
+
+#MSG_BED_CORRECTION_LEFT c=14
+"Left side [um]"
+"\x00"
+
+#MSG_LIN_CORRECTION c=18
+"Lin. correction"
+"\x00"
+
+#MSG_BABYSTEP_Z c=18
+"Live adjust Z"
+"\x00"
+
+#MSG_INSERT_FIL c=20 r=6
+"Insert the filament (do not load it) into the extruder and then press the knob."
+"\x00"
+
+#MSG_LOAD_FILAMENT c=17
+"Load filament"
+"\x00"
+
+#MSG_LOADING_COLOR c=20
+"Loading color"
+"\x00"
+
+#MSG_LOADING_FILAMENT c=20
+"Loading filament"
+"\x00"
+
+#MSG_ITERATION c=12
+"Iteration"
+"\x00"
+
+#MSG_LOOSE_PULLEY c=20
+"Loose pulley"
+"\x00"
+
+#MSG_LOAD_TO_NOZZLE c=18
+"Load to nozzle"
+"\x00"
+
+#MSG_M117_V2_CALIBRATION c=25
+"M117 First layer cal."
+"\x00"
+
+#MSG_MAIN c=18
+"Main"
+"\x00"
+
+#MSG_BL_HIGH c=12
+"Level Bright"
+"\x00"
+
+#MSG_BL_LOW c=12
+"Level Dimmed"
+"\x00"
+
+#MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
+"Measuring reference height of calibration point"
+"\x00"
+
+#MSG_MESH_BED_LEVELING c=18
+"Mesh Bed Leveling"
+"\x00"
+
+#MSG_MMU_OK_RESUMING_POSITION c=20 r=4
+"MMU OK. Resuming position..."
+"\x00"
+
+#MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
+"MMU OK. Resuming temperature..."
+"\x00"
+
+#MSG_MEASURED_SKEW c=14
+"Measured skew"
+"\x00"
+
+#MSG_MMU_FAILS c=15
+"MMU fails"
+"\x00"
+
+#MSG_MMU_LOAD_FAILED c=20
+"MMU load failed"
+"\x00"
+
+#MSG_MMU_LOAD_FAILS c=15
+"MMU load fails"
+"\x00"
+
+#MSG_MMU_OK_RESUMING c=20 r=4
+"MMU OK. Resuming..."
+"\x00"
+
+#MSG_MODE c=6
+"Mode"
+"\x00"
+
+#MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
+"MK3 firmware detected on MK3S printer"
+"\x00"
+
+#MSG_NORMAL c=7
+"Normal"
+"\x00"
+
+#MSG_SILENT c=7
+"Silent"
+"\x00"
+
+#MSG_MMU_USER_ATTENTION c=20 r=3
+"MMU needs user attention."
+"\x00"
+
+#MSG_MMU_POWER_FAILS c=15
+"MMU power fails"
+"\x00"
+
+#MSG_STEALTH c=7
+"Stealth"
+"\x00"
+
+#MSG_AUTO_POWER c=10
+"Auto power"
+"\x00"
+
+#MSG_HIGH_POWER c=10
+"High power"
+"\x00"
+
+#MSG_MMU_CONNECTED c=18
+"MMU2 connected"
+"\x00"
+
+#MSG_SELFTEST_MOTOR c=18
+"Motor"
+"\x00"
+
+#MSG_MOVE_AXIS c=18
+"Move axis"
+"\x00"
+
+#MSG_MOVE_X c=18
+"Move X"
+"\x00"
+
+#MSG_MOVE_Y c=18
+"Move Y"
+"\x00"
+
+#MSG_MOVE_Z c=18
+"Move Z"
+"\x00"
+
+#MSG_NO_MOVE c=20
+"No move."
+"\x00"
+
+#MSG_NO_CARD c=18
+"No SD card"
+"\x00"
+
+#MSG_NA c=3
+"N/A"
+"\x00"
+
+#MSG_NO c=4
+"No"
+"\x00"
+
+#MSG_SELFTEST_NOTCONNECTED c=20
+"Not connected"
+"\x00"
+
+#MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
+"New firmware version available:"
+"\x00"
+
+#MSG_SELFTEST_FAN_NO c=19
+"Not spinning"
+"\x00"
+
+#MSG_WIZARD_V2_CAL c=20 r=8
+"Now I will calibrate distance between tip of the nozzle and heatbed surface."
+"\x00"
+
+#MSG_WIZARD_WILL_PREHEAT c=20 r=4
+"Now I will preheat nozzle for PLA."
+"\x00"
+
+#MSG_NOZZLE c=12
+"Nozzle"
+"\x00"
+
+#MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
+"Old settings found. Default PID, Esteps etc. will be set."
+"\x00"
+
+#MSG_REMOVE_TEST_PRINT c=20 r=4
+"Now remove the test print from steel sheet."
+"\x00"
+
+#MSG_NOZZLE_FAN c=10
+"Nozzle FAN"
+"\x00"
+
+#MSG_PAUSE_PRINT c=18
+"Pause print"
+"\x00"
+
+#MSG_PID_RUNNING c=20
+"PID cal."
+"\x00"
+
+#MSG_PID_FINISHED c=20
+"PID cal. finished"
+"\x00"
+
+#MSG_PID_EXTRUDER c=17
+"PID calibration"
+"\x00"
+
+#MSG_PINDA_PREHEAT c=20
+"PINDA Heating"
+"\x00"
+
+#MSG_PAPER c=20 r=10
+"Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
+"\x00"
+
+#MSG_WIZARD_CLEAN_HEATBED c=20 r=8
+"Please clean heatbed and then press the knob."
+"\x00"
+
+#MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
+"Please clean the nozzle for calibration. Click when done."
+"\x00"
+
+#MSG_SELFTEST_PLEASECHECK c=20
+"Please check:"
+"\x00"
+
+#MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
+"Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
+"\x00"
+
+#MSG_CHECK_IDLER c=20 r=5
+"Please open idler and remove filament manually."
+"\x00"
+
+#MSG_PLACE_STEEL_SHEET c=20 r=5
+"Please place steel sheet on heatbed."
+"\x00"
+
+#MSG_PRESS_TO_UNLOAD c=20 r=4
+"Please press the knob to unload filament"
+"\x00"
+
+#MSG_PULL_OUT_FILAMENT c=20 r=4
+"Please pull out filament immediately"
+"\x00"
+
+#MSG_EJECT_REMOVE c=20 r=4
+"Please remove filament and then press the knob."
+"\x00"
+
+#MSG_REMOVE_STEEL_SHEET c=20 r=4
+"Please remove steel sheet from heatbed."
+"\x00"
+
+#MSG_RUN_XYZ c=20 r=4
+"Please run XYZ calibration first."
+"\x00"
+
+#MSG_UPDATE_MMU2_FW c=20 r=4
+"Please update firmware in your MMU2. Waiting for reset."
+"\x00"
+
+#MSG_PLEASE_WAIT c=20
+"Please wait"
+"\x00"
+
+#MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
+"Please remove shipping helpers first."
+"\x00"
+
+#MSG_PREHEAT_NOZZLE c=20
+"Preheat the nozzle!"
+"\x00"
+
+#MSG_PREHEAT c=18
+"Preheat"
+"\x00"
+
+#MSG_WIZARD_HEATING c=20 r=3
+"Preheating nozzle. Please wait."
+"\x00"
+
+#MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
+"Please upgrade."
+"\x00"
+
+#MSG_PRESS_TO_PREHEAT c=20 r=4
+"Press the knob to preheat nozzle and continue."
+"\x00"
+
+#MSG_FS_PAUSE c=5
+"Pause"
+"\x00"
+
+#MSG_POWER_FAILURES c=15
+"Power failures"
+"\x00"
+
+#MSG_PRINT_ABORTED c=20
+"Print aborted"
+"\x00"
+
+#MSG_PREHEATING_TO_LOAD c=20
+"Preheating to load"
+"\x00"
+
+#MSG_PREHEATING_TO_UNLOAD c=20
+"Preheating to unload"
+"\x00"
+
+#MSG_SELFTEST_PRINT_FAN_SPEED c=18
+"Print fan:"
+"\x00"
+
+#MSG_CARD_MENU c=18
+"Print from SD"
+"\x00"
+
+#MSG_PRESS_KNOB c=20
+"Press the knob"
+"\x00"
+
+#MSG_PRINT_PAUSED c=20
+"Print paused"
+"\x00"
+
+#MSG_RESUME_NOZZLE_TEMP c=20 r=4
+"Press the knob to resume nozzle temperature."
+"\x00"
+
+#MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
+"Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
+"\x00"
+
+#MSG_PRINT_FAN c=10
+"Print FAN"
+"\x00"
+
+#MSG_WIZARD_LOAD_FILAMENT c=20 r=6
+"Please insert filament into the extruder, then press the knob to load it."
+"\x00"
+
+#MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
+"Please insert filament into the first tube of the MMU, then press the knob to load it."
+"\x00"
+
+#MSG_PLEASE_LOAD_PLA c=20 r=4
+"Please load filament first."
+"\x00"
+
+#MSG_BED_CORRECTION_REAR c=14
+"Rear side [um]"
+"\x00"
+
+#MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
+"Please unload the filament first, then repeat this action."
+"\x00"
+
+#MSG_CHECK_IR_CONNECTION c=20 r=4
+"Please check the IR sensor connection, unload filament if present."
+"\x00"
+
+#MSG_RECOVERING_PRINT c=20
+"Recovering print"
+"\x00"
+
+#MSG_REMOVE_OLD_FILAMENT c=20 r=5
+"Remove old filament and press the knob to start loading new filament."
+"\x00"
+
+#MSG_CALIBRATE_BED_RESET c=18
+"Reset XYZ calibr."
+"\x00"
+
+#MSG_RESET c=14
+"Reset"
+"\x00"
+
+#MSG_RESUME_PRINT c=18
+"Resume print"
+"\x00"
+
+#MSG_RESUMING_PRINT c=20
+"Resuming print"
+"\x00"
+
+#MSG_BED_CORRECTION_RIGHT c=14
+"Right side[um]"
+"\x00"
+
+#MSG_RPI_PORT c=13
+"RPi port"
+"\x00"
+
+#MSG_WIZARD_RERUN c=20 r=7
+"Running Wizard will delete current calibration results and start from the beginning. Continue?"
+"\x00"
+
+#MSG_SD_CARD c=8
+"SD card"
+"\x00"
+
+#MSG_RIGHT c=10
+"Right"
+"\x00"
+
+#MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
+"Searching bed calibration point"
+"\x00"
+
+#MSG_LANGUAGE_SELECT c=18
+"Select language"
+"\x00"
+
+#MSG_SELFTEST_OK c=20
+"Self test OK"
+"\x00"
+
+#MSG_SELFTEST_START c=20
+"Self test start"
+"\x00"
+
+#MSG_SELFTEST c=18
+"Selftest"
+"\x00"
+
+#MSG_SELFTEST_ERROR c=20
+"Selftest error!"
+"\x00"
+
+#MSG_SELFTEST_FAILED c=20
+"Selftest failed"
+"\x00"
+
+#MSG_FORCE_SELFTEST c=20 r=8
+"Selftest will be run to calibrate accurate sensorless rehoming."
+"\x00"
+
+#MSG_SEL_PREHEAT_TEMP c=20 r=6
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#MSG_SET_TEMPERATURE c=20
+"Set temperature:"
+"\x00"
+
+#MSG_SETTINGS c=18
+"Settings"
+"\x00"
+
+#MSG_SHOW_END_STOPS c=18
+"Show end stops"
+"\x00"
+
+#MSG_FILE_CNT c=20 r=6
+"Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
+"\x00"
+
+#MSG_SORT c=7
+"Sort"
+"\x00"
+
+#MSG_NONE c=8
+"None"
+"\x00"
+
+#MSG_SORT_TIME c=8
+"Time"
+"\x00"
+
+#MSG_SEVERE_SKEW c=14
+"Severe skew"
+"\x00"
+
+#MSG_SORT_ALPHA c=8
+"Alphabet"
+"\x00"
+
+#MSG_SORTING c=20
+"Sorting files"
+"\x00"
+
+#MSG_SOUND_LOUD c=7
+"Loud"
+"\x00"
+
+#MSG_SLIGHT_SKEW c=14
+"Slight skew"
+"\x00"
+
+#MSG_SOUND c=7
+"Sound"
+"\x00"
+
+#MSG_RUNOUTS c=7
+"Runouts"
+"\x00"
+
+#MSG_Z-LEVELING_ENFORCED c=20 r=4
+"Some problem encountered, Z-leveling enforced ..."
+"\x00"
+
+#MSG_SOUND_ONCE c=7
+"Once"
+"\x00"
+
+#MSG_SPEED c=15
+"Speed"
+"\x00"
+
+#MSG_SELFTEST_FAN_YES c=19
+"Spinning"
+"\x00"
+
+#MSG_TEMP_CAL_WARNING c=20 r=4
+"Stable ambient temperature 21-26C is needed a rigid stand is required."
+"\x00"
+
+#MSG_STATISTICS c=18
+"Statistics"
+"\x00"
+
+#MSG_STOP_PRINT c=18
+"Stop print"
+"\x00"
+
+#MSG_STOPPED c=20
+"STOPPED."
+"\x00"
+
+#MSG_SUPPORT c=18
+"Support"
+"\x00"
+
+#MSG_SELFTEST_SWAPPED c=16
+"Swapped"
+"\x00"
+
+#MSG_SELECT_FILAMENT c=20
+"Select filament:"
+"\x00"
+
+#MSG_TEMP_CALIBRATION c=14
+"Temp. cal."
+"\x00"
+
+#MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
+"Select temperature which matches your material."
+"\x00"
+
+#MSG_CALIBRATION_PINDA_MENU c=17
+"Temp. calibration"
+"\x00"
+
+#MSG_TEMP_CAL_FAILED c=20 r=8
+"Temperature calibration failed"
+"\x00"
+
+#MSG_TEMP_CALIBRATION_DONE c=20 r=12
+"Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
+"\x00"
+
+#MSG_FS_VERIFIED c=20 r=3
+"Sensor verified, remove the filament now."
+"\x00"
+
+#MSG_TEMPERATURE c=18
+"Temperature"
+"\x00"
+
+#MSG_MENU_TEMPERATURES c=15
+"Temperatures"
+"\x00"
+
+#MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
+"There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
+"\x00"
+
+#MSG_TOTAL_FILAMENT c=19
+"Total filament"
+"\x00"
+
+#MSG_TOTAL_PRINT_TIME c=19
+"Total print time"
+"\x00"
+
+#MSG_TUNE c=18
+"Tune"
+"\x00"
+
+#MSG_TOTAL_FAILURES c=20
+"Total failures"
+"\x00"
+
+#MSG_TO_LOAD_FIL c=20
+"to load filament"
+"\x00"
+
+#MSG_TO_UNLOAD_FIL c=20
+"to unload filament"
+"\x00"
+
+#MSG_UNLOAD_FILAMENT c=16
+"Unload filament"
+"\x00"
+
+#MSG_UNLOADING_FILAMENT c=20
+"Unloading filament"
+"\x00"
+
+#MSG_TOTAL c=6
+"Total"
+"\x00"
+
+#MSG_USED c=19
+"Used during print"
+"\x00"
+
+#MSG_MENU_VOLTAGES c=15
+"Voltages"
+"\x00"
+
+#MSG_UNKNOWN c=13
+"unknown"
+"\x00"
+
+#MSG_USERWAIT c=20
+"Wait for user..."
+"\x00"
+
+#MSG_WAITING_TEMP c=20 r=4
+"Waiting for nozzle and bed cooling"
+"\x00"
+
+#MSG_WAITING_TEMP_PINDA c=20 r=3
+"Waiting for PINDA probe cooling"
+"\x00"
+
+#MSG_CHANGED_BOTH c=20 r=4
+"Warning: both printer type and motherboard type changed."
+"\x00"
+
+#MSG_CHANGED_MOTHERBOARD c=20 r=4
+"Warning: motherboard type changed."
+"\x00"
+
+#MSG_CHANGED_PRINTER c=20 r=4
+"Warning: printer type changed."
+"\x00"
+
+#MSG_UNLOAD_SUCCESSFUL c=20 r=2
+"Was filament unload successful?"
+"\x00"
+
+#MSG_SELFTEST_WIRINGERROR c=18
+"Wiring error"
+"\x00"
+
+#MSG_WIZARD c=17
+"Wizard"
+"\x00"
+
+#MSG_XYZ_DETAILS c=18
+"XYZ cal. details"
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
+"XYZ calibration failed. Please consult the manual."
+"\x00"
+
+#MSG_YES c=3
+"Yes"
+"\x00"
+
+#MSG_WIZARD_QUIT c=20 r=8
+"You can always resume the Wizard from Calibration -> Wizard."
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
+"XYZ calibration all right. Skew will be corrected automatically."
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
+"XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
+"\x00"
+
+#MSG_TIMEOUT c=12
+"Timeout"
+"\x00"
+
+#MSG_X_CORRECTION c=13
+"X-correct:"
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
+"XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
+"XYZ calibration compromised. Front calibration points not reachable."
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
+"XYZ calibration compromised. Right front calibration point not reachable."
+"\x00"
+
+#MSG_LOAD_ALL c=17
+"Load all"
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
+"XYZ calibration failed. Bed calibration point was not found."
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
+"XYZ calibration failed. Front calibration points not reachable."
+"\x00"
+
+#MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
+"XYZ calibration failed. Right front calibration point not reachable."
+"\x00"
+
+#MSG_Y_DIST_FROM_MIN c=20
+"Y distance from min"
+"\x00"
+
+#MSG_WIZARD_V2_CAL_2 c=20 r=12
+"The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
+"\x00"
+
+#MSG_FIL_FAILED c=20 r=5
+"Verification failed, remove the filament and try again."
+"\x00"
+
+#MSG_Y_CORRECTION c=13
+"Y-correct:"
+"\x00"
+
+#MSG_OFF c=3
+"Off"
+"\x00"
+
+#MSG_ON c=3
+"On"
+"\x00"
+
+#MSG_BACK c=18
+"Back"
+"\x00"
+
+#MSG_CHECKS c=18
+"Checks"
+"\x00"
+
+#MSG_FALSE_TRIGGERING c=20
+"False triggering"
+"\x00"
+
+#MSG_STRICT c=8
+"Strict"
+"\x00"
+
+#MSG_WARN c=8
+"Warn"
+"\x00"
+
+#MSG_HW_SETUP c=18
+"HW Setup"
+"\x00"
+
+#MSG_MAGNETS_COMP c=13
+"Magnets comp."
+"\x00"
+
+#MSG_MESH c=12
+"Mesh"
+"\x00"
+
+#MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
+"MK3S firmware detected on MK3 printer"
+"\x00"
+
+#MSG_MMU_MODE c=8
+"MMU Mode"
+"\x00"
+
+#MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
+"Mode change in progress..."
+"\x00"
+
+#MSG_MODEL c=8
+"Model"
+"\x00"
+
+#MSG_NOZZLE_DIAMETER c=10
+"Nozzle d."
+"\x00"
+
+#MSG_GCODE_DIFF_CONTINUE c=20 r=4
+"G-code sliced for a different level. Continue?"
+"\x00"
+
+#MSG_GCODE_DIFF_CANCELLED c=20 r=7
+"G-code sliced for a different level. Please re-slice the model again. Print cancelled."
+"\x00"
+
+#MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
+"G-code sliced for a different printer type. Continue?"
+"\x00"
+
+#MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
+"G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
+"\x00"
+
+#MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
+"G-code sliced for a newer firmware. Continue?"
+"\x00"
+
+#MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
+"G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
+"\x00"
+
+#MSG_PREHEATING_TO_CUT c=20
+"Preheating to cut"
+"\x00"
+
+#MSG_PREHEATING_TO_EJECT c=20
+"Preheating to eject"
+"\x00"
+
+#MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
+"Printer nozzle diameter differs from the G-code. Continue?"
+"\x00"
+
+#MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
+"Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
+"\x00"
+
+#MSG_SELFTEST_FS_LEVEL c=20
+"%s level expected"
+"\x00"
+
+#MSG_RENAME c=18
+"Rename"
+"\x00"
+
+#MSG_SELECT c=18
+"Select"
+"\x00"
+
+#MSG_INFO_SENSORS c=18
+"Sensor info"
+"\x00"
+
+#MSG_SHEET c=10
+"Sheet"
+"\x00"
+
+#MSG_SOUND_BLIND c=7
+"Assist"
+"\x00"
+
+#MSG_STEEL_SHEET c=18
+"Steel sheets"
+"\x00"
+
+#MSG_Z_CORRECTION c=13
+"Z-correct:"
+"\x00"
+
+#MSG_Z_PROBE_NR c=14
+"Z-probe nr."
+"\x00"
+
+#MSG_PRINTER_IP c=18
+"Printer IP Addr:"
+"\x00"

lang/po/Firmware_sl.po

@@ -0,0 +1,1772 @@
+# Translation of Prusa-Firmware into Slovanian.
+#
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: sl\n"
+"Project-Id-Version: Prusa-Firmware\n"
+"POT-Creation-Date: Tue 21 Dec 2021 03:23:03 PM CET\n"
+"PO-Revision-Date: Tue 21 Dec 2021 03:23:03 PM CET\n"
+"Language-Team: \n"
+"X-Generator: Poedit 2.0.7\n"
+"X-Poedit-SourceCharset: UTF-8\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+
+# MSG_IR_03_OR_OLDER c=18
+#: messages.c:164
+msgid " 0.3 or older"
+msgstr ""
+
+# MSG_FS_V_03_OR_OLDER c=18
+#: Marlin_main.cpp:9884
+msgid "FS v0.3 or older"
+msgstr ""
+
+# MSG_IR_04_OR_NEWER c=18
+#: messages.c:163
+msgid " 0.4 or newer"
+msgstr ""
+
+# MSG_FS_V_04_OR_NEWER c=18
+#: Marlin_main.cpp:9883
+msgid "FS v0.4 or newer"
+msgstr ""
+
+# MSG_IR_UNKNOWN c=18
+#: messages.c:165
+msgid "unknown state"
+msgstr ""
+
+# MSG_MEASURED_OFFSET c=20
+#: ultralcd.cpp:2913
+msgid "[0;0] point offset"
+msgstr ""
+
+# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
+#: 
+msgid "Crash detection can\x0abe turned on only in\x0aNormal mode"
+msgstr ""
+
+# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
+#: 
+msgid "WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
+msgstr ""
+
+# MSG_BABYSTEPPING_Z c=15
+#: ultralcd.cpp:3034
+msgid "Adjusting Z:"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_ALLCORRECT c=20
+#: ultralcd.cpp:8490
+msgid "All correct"
+msgstr ""
+
+# MSG_WIZARD_DONE c=20 r=8
+#: messages.c:118
+msgid "All is done. Happy printing!"
+msgstr ""
+
+# MSG_AMBIENT c=14
+#: ultralcd.cpp:1727
+msgid "Ambient"
+msgstr ""
+
+# MSG_AUTO c=6
+#: messages.c:160
+msgid "Auto"
+msgstr ""
+
+# MSG_PRESS c=20 r=2
+#: ultralcd.cpp:2485
+msgid "and press the knob"
+msgstr ""
+
+# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#: ultralcd.cpp:3355
+msgid "Are left and right Z~carriages all up?"
+msgstr ""
+
+# MSG_AUTO_HOME c=18
+#: messages.c:11
+msgid "Auto home"
+msgstr ""
+
+# MSG_AUTOLOAD_FILAMENT c=18
+#: ultralcd.cpp:6732
+msgid "AutoLoad filament"
+msgstr ""
+
+# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
+#: ultralcd.cpp:4317
+msgid "Autoloading filament available only when filament sensor is turned on..."
+msgstr ""
+
+# MSG_AUTOLOADING_ENABLED c=20 r=4
+#: ultralcd.cpp:2648
+msgid "Autoloading filament is active, just press the knob and insert filament..."
+msgstr ""
+
+# MSG_SELFTEST_AXIS_LENGTH c=20
+#: ultralcd.cpp:8173
+msgid "Axis length"
+msgstr ""
+
+# MSG_SELFTEST_AXIS c=16
+#: ultralcd.cpp:8174
+msgid "Axis"
+msgstr ""
+
+# MSG_SELFTEST_BEDHEATER c=20
+#: ultralcd.cpp:8131
+msgid "Bed/Heater"
+msgstr ""
+
+# MSG_BED_DONE c=20
+#: messages.c:15
+msgid "Bed done"
+msgstr ""
+
+# MSG_BED_HEATING c=20
+#: messages.c:16
+msgid "Bed Heating"
+msgstr ""
+
+# MSG_BED_CORRECTION_MENU c=18
+#: ultralcd.cpp:5798
+msgid "Bed level correct"
+msgstr ""
+
+# MSG_BELTTEST c=18
+#: ultralcd.cpp:5778
+msgid "Belt test"
+msgstr ""
+
+# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
+#: messages.c:17
+msgid "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for reset."
+msgstr ""
+
+# MSG_BRIGHT c=6
+#: messages.c:158
+msgid "Bright"
+msgstr ""
+
+# MSG_BRIGHTNESS c=18
+#: messages.c:154
+msgid "Brightness"
+msgstr ""
+
+# MSG_BED c=13
+#: messages.c:14
+msgid "Bed"
+msgstr ""
+
+# MSG_BELT_STATUS c=18
+#: messages.c:19
+msgid "Belt status"
+msgstr ""
+
+# MSG_RECOVER_PRINT c=20 r=2
+#: messages.c:82
+msgid "Blackout occurred. Recover print?"
+msgstr ""
+
+# MSG_CALIBRATING_HOME c=20
+#: ultralcd.cpp:8492
+msgid "Calibrating home"
+msgstr ""
+
+# MSG_CALIBRATE_BED c=18
+#: ultralcd.cpp:5787
+msgid "Calibrate XYZ"
+msgstr ""
+
+# MSG_HOMEYZ c=18
+#: messages.c:52
+msgid "Calibrate Z"
+msgstr ""
+
+# MSG_CALIBRATE_PINDA c=17
+#: ultralcd.cpp:4529
+msgid "Calibrate"
+msgstr ""
+
+# MSG_CANCEL2 c=10
+#: messages.c:20
+msgid ">Cancel"
+msgstr ""
+
+# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
+#: ultralcd.cpp:3318
+msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+msgstr ""
+
+# MSG_CALIBRATE_Z_AUTO c=20 r=2
+#: messages.c:21
+msgid "Calibrating Z"
+msgstr ""
+
+# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
+#: ultralcd.cpp:3318
+msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+msgstr ""
+
+# MSG_HOMEYZ_DONE c=20
+#: ultralcd.cpp:656
+msgid "Calibration done"
+msgstr ""
+
+# MSG_MENU_CALIBRATION c=18
+#: messages.c:68
+msgid "Calibration"
+msgstr ""
+
+# MSG_SD_REMOVED c=20
+#: ultralcd.cpp:8939
+msgid "Card removed"
+msgstr ""
+
+# MSG_CHECKING_FILE c=17
+#: ultralcd.cpp:8580
+msgid "Checking file"
+msgstr ""
+
+# MSG_NOT_COLOR c=19
+#: ultralcd.cpp:2565
+msgid "Color not correct"
+msgstr ""
+
+# MSG_COOLDOWN c=18
+#: messages.c:27
+msgid "Cooldown"
+msgstr ""
+
+# MSG_COPY_SEL_LANG c=20 r=3
+#: ultralcd.cpp:4435
+msgid "Copy selected language?"
+msgstr ""
+
+# MSG_CRASHDETECT c=13
+#: messages.c:30
+msgid "Crash det."
+msgstr ""
+
+# MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+#: ultralcd.cpp:4842
+msgid "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
+msgstr ""
+
+# MSG_CRASH_DETECTED c=20
+#: messages.c:29
+msgid "Crash detected."
+msgstr ""
+
+# MSG_CRASH_RESUME c=20 r=3
+#: Marlin_main.cpp:651
+msgid "Crash detected. Resume print?"
+msgstr ""
+
+# MSG_CRASH c=7
+#: messages.c:28
+msgid "Crash"
+msgstr ""
+
+# MSG_CURRENT c=19
+#: ultralcd.cpp:5929
+msgid "Current"
+msgstr ""
+
+# MSG_DATE c=17
+#: ultralcd.cpp:1985
+msgid "Date:"
+msgstr ""
+
+# MSG_COMMUNITY_MADE c=18
+#: messages.c:25
+msgid "Community made"
+msgstr ""
+
+# MSG_DISABLE_STEPPERS c=18
+#: ultralcd.cpp:5678
+msgid "Disable steppers"
+msgstr ""
+
+# MSG_BABYSTEP_Z_NOT_SET c=20 r=12
+#: messages.c:13
+msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
+msgstr ""
+
+# MSG_FS_CONTINUE c=5
+#: messages.c:152
+msgid "Cont."
+msgstr ""
+
+# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
+#: ultralcd.cpp:5021
+msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
+msgstr ""
+
+# MSG_EXTRUDER_CORRECTION c=13
+#: ultralcd.cpp:5090
+msgid "E-correct:"
+msgstr ""
+
+# MSG_EJECT_FILAMENT c=16
+#: messages.c:60
+msgid "Eject filament"
+msgstr ""
+
+# MSG_EJECTING_FILAMENT c=20
+#: mmu.cpp:1415
+msgid "Ejecting filament"
+msgstr ""
+
+# MSG_SELFTEST_ENDSTOP_NOTHIT c=20
+#: ultralcd.cpp:8149
+msgid "Endstop not hit"
+msgstr ""
+
+# MSG_SELFTEST_ENDSTOP c=16
+#: ultralcd.cpp:8144
+msgid "Endstop"
+msgstr ""
+
+# MSG_SELFTEST_ENDSTOPS c=20
+#: ultralcd.cpp:8135
+msgid "Endstops"
+msgstr ""
+
+# MSG_STACK_ERROR c=20 r=4
+#: 
+msgid "Error - static memory has been overwritten"
+msgstr ""
+
+# MSG_CUT_FILAMENT c=16
+#: messages.c:61
+msgid "Cut filament"
+msgstr ""
+
+# MSG_CUTTER c=9
+#: messages.c:128
+msgid "Cutter"
+msgstr ""
+
+# MSG_MMU_CUTTING_FIL c=18
+#: mmu.cpp:1387
+msgid "Cutting filament"
+msgstr ""
+
+# MSG_FSENS_NOT_RESPONDING c=20 r=4
+#: ultralcd.cpp:4330
+msgid "ERROR: Filament sensor is not responding, please check connection."
+msgstr ""
+
+# MSG_DIM c=6
+#: messages.c:159
+msgid "Dim"
+msgstr ""
+
+# MSG_ERROR c=10
+#: messages.c:31
+msgid "ERROR:"
+msgstr ""
+
+# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
+#: ultralcd.cpp:8498
+msgid "Extruder fan:"
+msgstr ""
+
+# MSG_INFO_EXTRUDER c=18
+#: ultralcd.cpp:2040
+msgid "Extruder info"
+msgstr ""
+
+# MSG_EXTRUDER c=17
+#: messages.c:32
+msgid "Extruder"
+msgstr ""
+
+# MSG_MMU_FAIL_STATS c=18
+#: ultralcd.cpp:6754
+msgid "Fail stats MMU"
+msgstr ""
+
+# MSG_FSENSOR_AUTOLOAD c=13
+#: messages.c:48
+msgid "F. autoload"
+msgstr ""
+
+# MSG_FAIL_STATS c=18
+#: ultralcd.cpp:6751
+msgid "Fail stats"
+msgstr ""
+
+# MSG_FAN_SPEED c=14
+#: messages.c:36
+msgid "Fan speed"
+msgstr ""
+
+# MSG_SELFTEST_FAN c=20
+#: messages.c:91
+msgid "Fan test"
+msgstr ""
+
+# MSG_FANS_CHECK c=13
+#: messages.c:33
+msgid "Fans check"
+msgstr ""
+
+# MSG_FSENSOR c=12
+#: messages.c:49
+msgid "Fil. sensor"
+msgstr ""
+
+# MSG_FIL_RUNOUTS c=15
+#: messages.c:34
+msgid "Fil. runouts"
+msgstr ""
+
+# MSG_FILAMENT_CLEAN c=20 r=2
+#: messages.c:37
+msgid "Filament extruding & with correct color?"
+msgstr ""
+
+# MSG_NOT_LOADED c=19
+#: ultralcd.cpp:2564
+msgid "Filament not loaded"
+msgstr ""
+
+# MSG_FILAMENT_SENSOR c=20
+#: messages.c:97
+msgid "Filament sensor"
+msgstr ""
+
+# MSG_FILAMENT_USED c=19
+#: ultralcd.cpp:2713
+msgid "Filament used"
+msgstr ""
+
+# MSG_PRINT_TIME c=19
+#: ultralcd.cpp:2714
+msgid "Print time"
+msgstr ""
+
+# MSG_FS_ACTION c=10
+#: messages.c:151
+msgid "FS Action"
+msgstr ""
+
+# MSG_FILE_INCOMPLETE c=20 r=3
+#: ultralcd.cpp:8634
+msgid "File incomplete. Continue anyway?"
+msgstr ""
+
+# MSG_FINISHING_MOVEMENTS c=20
+#: messages.c:45
+msgid "Finishing movements"
+msgstr ""
+
+# MSG_V2_CALIBRATION c=18
+#: messages.c:124
+msgid "First layer cal."
+msgstr ""
+
+# MSG_WIZARD_SELFTEST c=20 r=8
+#: ultralcd.cpp:4942
+msgid "First, I will run the selftest to check most common assembly problems."
+msgstr ""
+
+# MSG_MMU_FIX_ISSUE c=20 r=4
+#: mmu.cpp:727
+msgid "Fix the issue and then press button on MMU unit."
+msgstr ""
+
+# MSG_FLOW c=15
+#: ultralcd.cpp:6888
+msgid "Flow"
+msgstr ""
+
+# MSG_SELFTEST_COOLING_FAN c=20
+#: messages.c:88
+msgid "Front print fan?"
+msgstr ""
+
+# MSG_BED_CORRECTION_FRONT c=14
+#: ultralcd.cpp:3116
+msgid "Front side[um]"
+msgstr ""
+
+# MSG_SELFTEST_FANS c=20
+#: ultralcd.cpp:8179
+msgid "Front/left fans"
+msgstr ""
+
+# MSG_SELFTEST_HEATERTHERMISTOR c=20
+#: ultralcd.cpp:8127
+msgid "Heater/Thermistor"
+msgstr ""
+
+# MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
+#: Marlin_main.cpp:9874
+msgid "Heating disabled by safety timer."
+msgstr ""
+
+# MSG_HEATING_COMPLETE c=20
+#: messages.c:51
+msgid "Heating done."
+msgstr ""
+
+# MSG_HEATING c=20
+#: messages.c:50
+msgid "Heating"
+msgstr ""
+
+# MSG_WIZARD_WELCOME c=20 r=7
+#: messages.c:121
+msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
+msgstr "Zivjo, jaz sem vas originalni tiskalnik Prusa i3. Ali zelite, da vas vodim skozi postopek nastavitve?"
+
+# MSG_FILAMENTCHANGE c=18
+#: messages.c:43
+msgid "Change filament"
+msgstr ""
+
+# MSG_CHANGE_SUCCESS c=20
+#: ultralcd.cpp:2494
+msgid "Change success!"
+msgstr ""
+
+# MSG_CORRECTLY c=20
+#: ultralcd.cpp:2562
+msgid "Changed correctly?"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_BED c=20
+#: messages.c:94
+msgid "Checking bed"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_ENDSTOPS c=20
+#: ultralcd.cpp:8481
+msgid "Checking endstops"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_HOTEND c=20
+#: ultralcd.cpp:8487
+msgid "Checking hotend"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_FSENSOR c=20
+#: messages.c:95
+msgid "Checking sensors"
+msgstr ""
+
+# MSG_CHECKING_X c=20
+#: messages.c:23
+msgid "Checking X axis"
+msgstr ""
+
+# MSG_CHECKING_Y c=20
+#: messages.c:24
+msgid "Checking Y axis"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_Z c=20
+#: ultralcd.cpp:8484
+msgid "Checking Z axis"
+msgstr ""
+
+# MSG_CHOOSE_EXTRUDER c=20
+#: messages.c:54
+msgid "Choose extruder:"
+msgstr ""
+
+# MSG_CHOOSE_FILAMENT c=20
+#: messages.c:55
+msgid "Choose filament:"
+msgstr ""
+
+# MSG_FILAMENT c=17
+#: messages.c:35
+msgid "Filament"
+msgstr ""
+
+# MSG_WIZARD_XYZ_CAL c=20 r=8
+#: ultralcd.cpp:4951
+msgid "I will run xyz calibration now. It will take approx. 12 mins."
+msgstr ""
+
+# MSG_WIZARD_Z_CAL c=20 r=8
+#: ultralcd.cpp:4959
+msgid "I will run z calibration now."
+msgstr ""
+
+# MSG_WATCH c=18
+#: messages.c:116
+msgid "Info screen"
+msgstr ""
+
+# MSG_INSERT_FILAMENT c=20
+#: ultralcd.cpp:2482
+msgid "Insert filament"
+msgstr ""
+
+# MSG_FILAMENT_LOADED c=20 r=2
+#: messages.c:38
+msgid "Is filament loaded?"
+msgstr ""
+
+# MSG_STEEL_SHEET_CHECK c=20 r=2
+#: messages.c:109
+msgid "Is steel sheet on heatbed?"
+msgstr ""
+
+# MSG_LAST_PRINT_FAILURES c=20
+#: messages.c:57
+msgid "Last print failures"
+msgstr ""
+
+# MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
+#: messages.c:122
+msgid "Hi, I am your Original Prusa i3 printer. I will guide you through a short setup process, in which the Z-axis will be calibrated. Then, you will be ready to print."
+msgstr ""
+
+# MSG_ADDITIONAL_SHEETS c=20 r=9
+#: ultralcd.cpp:5029
+msgid "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."
+msgstr ""
+
+# MSG_LAST_PRINT c=18
+#: messages.c:56
+msgid "Last print"
+msgstr ""
+
+# MSG_SELFTEST_EXTRUDER_FAN c=20
+#: messages.c:89
+msgid "Left hotend fan?"
+msgstr ""
+
+# MSG_LEFT c=10
+#: ultralcd.cpp:2844
+msgid "Left"
+msgstr ""
+
+# MSG_BED_CORRECTION_LEFT c=14
+#: ultralcd.cpp:3114
+msgid "Left side [um]"
+msgstr ""
+
+# MSG_LIN_CORRECTION c=18
+#: ultralcd.cpp:5702
+msgid "Lin. correction"
+msgstr ""
+
+# MSG_BABYSTEP_Z c=18
+#: messages.c:12
+msgid "Live adjust Z"
+msgstr ""
+
+# MSG_INSERT_FIL c=20 r=6
+#: ultralcd.cpp:7380
+msgid "Insert the filament (do not load it) into the extruder and then press the knob."
+msgstr ""
+
+# MSG_LOAD_FILAMENT c=17
+#: messages.c:58
+msgid "Load filament"
+msgstr ""
+
+# MSG_LOADING_COLOR c=20
+#: ultralcd.cpp:2516
+msgid "Loading color"
+msgstr ""
+
+# MSG_LOADING_FILAMENT c=20
+#: messages.c:59
+msgid "Loading filament"
+msgstr ""
+
+# MSG_ITERATION c=12
+#: messages.c:53
+msgid "Iteration"
+msgstr ""
+
+# MSG_LOOSE_PULLEY c=20
+#: ultralcd.cpp:8167
+msgid "Loose pulley"
+msgstr ""
+
+# MSG_LOAD_TO_NOZZLE c=18
+#: ultralcd.cpp:6717
+msgid "Load to nozzle"
+msgstr ""
+
+# MSG_M117_V2_CALIBRATION c=25
+#: messages.c:62
+msgid "M117 First layer cal."
+msgstr ""
+
+# MSG_MAIN c=18
+#: messages.c:63
+msgid "Main"
+msgstr ""
+
+# MSG_BL_HIGH c=12
+#: messages.c:155
+msgid "Level Bright"
+msgstr ""
+
+# MSG_BL_LOW c=12
+#: messages.c:156
+msgid "Level Dimmed"
+msgstr ""
+
+# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
+#: messages.c:67
+msgid "Measuring reference height of calibration point"
+msgstr ""
+
+# MSG_MESH_BED_LEVELING c=18
+#: messages.c:148
+msgid "Mesh Bed Leveling"
+msgstr ""
+
+# MSG_MMU_OK_RESUMING_POSITION c=20 r=4
+#: mmu.cpp:765
+msgid "MMU OK. Resuming position..."
+msgstr ""
+
+# MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
+#: mmu.cpp:758
+msgid "MMU OK. Resuming temperature..."
+msgstr ""
+
+# MSG_MEASURED_SKEW c=14
+#: ultralcd.cpp:2885
+msgid "Measured skew"
+msgstr ""
+
+# MSG_MMU_FAILS c=15
+#: messages.c:69
+msgid "MMU fails"
+msgstr ""
+
+# MSG_MMU_LOAD_FAILED c=20
+#: mmu.cpp:1587
+msgid "MMU load failed"
+msgstr ""
+
+# MSG_MMU_LOAD_FAILS c=15
+#: messages.c:70
+msgid "MMU load fails"
+msgstr ""
+
+# MSG_MMU_OK_RESUMING c=20 r=4
+#: mmu.cpp:776
+msgid "MMU OK. Resuming..."
+msgstr ""
+
+# MSG_MODE c=6
+#: messages.c:103
+msgid "Mode"
+msgstr ""
+
+# MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
+#: Marlin_main.cpp:882
+msgid "MK3 firmware detected on MK3S printer"
+msgstr ""
+
+# MSG_NORMAL c=7
+#: messages.c:107
+msgid "Normal"
+msgstr ""
+
+# MSG_SILENT c=7
+#: messages.c:106
+msgid "Silent"
+msgstr ""
+
+# MSG_MMU_USER_ATTENTION c=20 r=3
+#: mmu.cpp:722
+msgid "MMU needs user attention."
+msgstr ""
+
+# MSG_MMU_POWER_FAILS c=15
+#: ultralcd.cpp:1517
+msgid "MMU power fails"
+msgstr ""
+
+# MSG_STEALTH c=7
+#: messages.c:108
+msgid "Stealth"
+msgstr ""
+
+# MSG_AUTO_POWER c=10
+#: messages.c:105
+msgid "Auto power"
+msgstr ""
+
+# MSG_HIGH_POWER c=10
+#: messages.c:104
+msgid "High power"
+msgstr ""
+
+# MSG_MMU_CONNECTED c=18
+#: ultralcd.cpp:1997
+msgid "MMU2 connected"
+msgstr ""
+
+# MSG_SELFTEST_MOTOR c=18
+#: messages.c:96
+msgid "Motor"
+msgstr ""
+
+# MSG_MOVE_AXIS c=18
+#: ultralcd.cpp:5677
+msgid "Move axis"
+msgstr ""
+
+# MSG_MOVE_X c=18
+#: ultralcd.cpp:4233
+msgid "Move X"
+msgstr ""
+
+# MSG_MOVE_Y c=18
+#: ultralcd.cpp:4234
+msgid "Move Y"
+msgstr ""
+
+# MSG_MOVE_Z c=18
+#: ultralcd.cpp:4235
+msgid "Move Z"
+msgstr ""
+
+# MSG_NO_MOVE c=20
+#: Marlin_main.cpp:5852
+msgid "No move."
+msgstr ""
+
+# MSG_NO_CARD c=18
+#: ultralcd.cpp:6697
+msgid "No SD card"
+msgstr ""
+
+# MSG_NA c=3
+#: messages.c:127
+msgid "N/A"
+msgstr ""
+
+# MSG_NO c=4
+#: messages.c:71
+msgid "No"
+msgstr ""
+
+# MSG_SELFTEST_NOTCONNECTED c=20
+#: ultralcd.cpp:8128
+msgid "Not connected"
+msgstr ""
+
+# MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
+#: util.cpp:195
+msgid "New firmware version available:"
+msgstr ""
+
+# MSG_SELFTEST_FAN_NO c=19
+#: messages.c:92
+msgid "Not spinning"
+msgstr ""
+
+# MSG_WIZARD_V2_CAL c=20 r=8
+#: ultralcd.cpp:4838
+msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface."
+msgstr ""
+
+# MSG_WIZARD_WILL_PREHEAT c=20 r=4
+#: ultralcd.cpp:4967
+msgid "Now I will preheat nozzle for PLA."
+msgstr ""
+
+# MSG_NOZZLE c=12
+#: messages.c:72
+msgid "Nozzle"
+msgstr ""
+
+# MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
+#: Marlin_main.cpp:1605
+msgid "Old settings found. Default PID, Esteps etc. will be set."
+msgstr ""
+
+# MSG_REMOVE_TEST_PRINT c=20 r=4
+#: ultralcd.cpp:4958
+msgid "Now remove the test print from steel sheet."
+msgstr ""
+
+# MSG_NOZZLE_FAN c=10
+#: ultralcd.cpp:1446
+msgid "Nozzle FAN"
+msgstr ""
+
+# MSG_PAUSE_PRINT c=18
+#: messages.c:74
+msgid "Pause print"
+msgstr ""
+
+# MSG_PID_RUNNING c=20
+#: ultralcd.cpp:1327
+msgid "PID cal."
+msgstr ""
+
+# MSG_PID_FINISHED c=20
+#: ultralcd.cpp:1333
+msgid "PID cal. finished"
+msgstr ""
+
+# MSG_PID_EXTRUDER c=17
+#: ultralcd.cpp:5799
+msgid "PID calibration"
+msgstr ""
+
+# MSG_PINDA_PREHEAT c=20
+#: ultralcd.cpp:683
+msgid "PINDA Heating"
+msgstr ""
+
+# MSG_PAPER c=20 r=10
+#: messages.c:73
+msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
+msgstr ""
+
+# MSG_WIZARD_CLEAN_HEATBED c=20 r=8
+#: ultralcd.cpp:5024
+msgid "Please clean heatbed and then press the knob."
+msgstr ""
+
+# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
+#: messages.c:26
+msgid "Please clean the nozzle for calibration. Click when done."
+msgstr ""
+
+# MSG_SELFTEST_PLEASECHECK c=20
+#: ultralcd.cpp:8122
+msgid "Please check:"
+msgstr ""
+
+# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
+#: messages.c:117
+msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
+msgstr ""
+
+# MSG_CHECK_IDLER c=20 r=5
+#: Marlin_main.cpp:3798
+msgid "Please open idler and remove filament manually."
+msgstr ""
+
+# MSG_PLACE_STEEL_SHEET c=20 r=5
+#: messages.c:75
+msgid "Please place steel sheet on heatbed."
+msgstr ""
+
+# MSG_PRESS_TO_UNLOAD c=20 r=4
+#: messages.c:79
+msgid "Please press the knob to unload filament"
+msgstr ""
+
+# MSG_PULL_OUT_FILAMENT c=20 r=4
+#: messages.c:81
+msgid "Please pull out filament immediately"
+msgstr ""
+
+# MSG_EJECT_REMOVE c=20 r=4
+#: mmu.cpp:1421
+msgid "Please remove filament and then press the knob."
+msgstr ""
+
+# MSG_REMOVE_STEEL_SHEET c=20 r=4
+#: messages.c:84
+msgid "Please remove steel sheet from heatbed."
+msgstr ""
+
+# MSG_RUN_XYZ c=20 r=4
+#: Marlin_main.cpp:5338
+msgid "Please run XYZ calibration first."
+msgstr ""
+
+# MSG_UPDATE_MMU2_FW c=20 r=4
+#: mmu.cpp:1341
+msgid "Please update firmware in your MMU2. Waiting for reset."
+msgstr ""
+
+# MSG_PLEASE_WAIT c=20
+#: messages.c:76
+msgid "Please wait"
+msgstr ""
+
+# MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
+#: ultralcd.cpp:4957
+msgid "Please remove shipping helpers first."
+msgstr ""
+
+# MSG_PREHEAT_NOZZLE c=20
+#: messages.c:78
+msgid "Preheat the nozzle!"
+msgstr ""
+
+# MSG_PREHEAT c=18
+#: ultralcd.cpp:6655
+msgid "Preheat"
+msgstr ""
+
+# MSG_WIZARD_HEATING c=20 r=3
+#: messages.c:119
+msgid "Preheating nozzle. Please wait."
+msgstr ""
+
+# MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
+#: util.cpp:199
+msgid "Please upgrade."
+msgstr ""
+
+# MSG_PRESS_TO_PREHEAT c=20 r=4
+#: Marlin_main.cpp:12049
+msgid "Press the knob to preheat nozzle and continue."
+msgstr ""
+
+# MSG_FS_PAUSE c=5
+#: fsensor.cpp:730
+msgid "Pause"
+msgstr ""
+
+# MSG_POWER_FAILURES c=15
+#: messages.c:77
+msgid "Power failures"
+msgstr ""
+
+# MSG_PRINT_ABORTED c=20
+#: messages.c:80
+msgid "Print aborted"
+msgstr ""
+
+# MSG_PREHEATING_TO_LOAD c=20
+#: ultralcd.cpp:2297
+msgid "Preheating to load"
+msgstr ""
+
+# MSG_PREHEATING_TO_UNLOAD c=20
+#: ultralcd.cpp:2302
+msgid "Preheating to unload"
+msgstr ""
+
+# MSG_SELFTEST_PRINT_FAN_SPEED c=18
+#: ultralcd.cpp:8501
+msgid "Print fan:"
+msgstr ""
+
+# MSG_CARD_MENU c=18
+#: messages.c:22
+msgid "Print from SD"
+msgstr ""
+
+# MSG_PRESS_KNOB c=20
+#: ultralcd.cpp:2130
+msgid "Press the knob"
+msgstr ""
+
+# MSG_PRINT_PAUSED c=20
+#: ultralcd.cpp:907
+msgid "Print paused"
+msgstr ""
+
+# MSG_RESUME_NOZZLE_TEMP c=20 r=4
+#: mmu.cpp:726
+msgid "Press the knob to resume nozzle temperature."
+msgstr ""
+
+# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
+#: messages.c:46
+msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
+msgstr ""
+
+# MSG_PRINT_FAN c=10
+#: ultralcd.cpp:1447
+msgid "Print FAN"
+msgstr ""
+
+# MSG_WIZARD_LOAD_FILAMENT c=20 r=6
+#: ultralcd.cpp:4818
+msgid "Please insert filament into the extruder, then press the knob to load it."
+msgstr ""
+
+# MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
+#: ultralcd.cpp:4813
+msgid "Please insert filament into the first tube of the MMU, then press the knob to load it."
+msgstr ""
+
+# MSG_PLEASE_LOAD_PLA c=20 r=4
+#: ultralcd.cpp:4735
+msgid "Please load filament first."
+msgstr ""
+
+# MSG_BED_CORRECTION_REAR c=14
+#: ultralcd.cpp:3117
+msgid "Rear side [um]"
+msgstr ""
+
+# MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
+#: ultralcd.cpp:7404
+msgid "Please unload the filament first, then repeat this action."
+msgstr ""
+
+# MSG_CHECK_IR_CONNECTION c=20 r=4
+#: ultralcd.cpp:7407
+msgid "Please check the IR sensor connection, unload filament if present."
+msgstr ""
+
+# MSG_RECOVERING_PRINT c=20
+#: Marlin_main.cpp:11393
+msgid "Recovering print"
+msgstr ""
+
+# MSG_REMOVE_OLD_FILAMENT c=20 r=5
+#: mmu.cpp:833
+msgid "Remove old filament and press the knob to start loading new filament."
+msgstr ""
+
+# MSG_CALIBRATE_BED_RESET c=18
+#: ultralcd.cpp:5804
+msgid "Reset XYZ calibr."
+msgstr ""
+
+# MSG_RESET c=14
+#: messages.c:85
+msgid "Reset"
+msgstr ""
+
+# MSG_RESUME_PRINT c=18
+#: messages.c:86
+msgid "Resume print"
+msgstr ""
+
+# MSG_RESUMING_PRINT c=20
+#: messages.c:87
+msgid "Resuming print"
+msgstr ""
+
+# MSG_BED_CORRECTION_RIGHT c=14
+#: ultralcd.cpp:3115
+msgid "Right side[um]"
+msgstr ""
+
+# MSG_RPI_PORT c=13
+#: messages.c:142
+msgid "RPi port"
+msgstr ""
+
+# MSG_WIZARD_RERUN c=20 r=7
+#: ultralcd.cpp:4756
+msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?"
+msgstr ""
+
+# MSG_SD_CARD c=8
+#: messages.c:138
+msgid "SD card"
+msgstr ""
+
+# MSG_RIGHT c=10
+#: ultralcd.cpp:2845
+msgid "Right"
+msgstr ""
+
+# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
+#: messages.c:44
+msgid "Searching bed calibration point"
+msgstr ""
+
+# MSG_LANGUAGE_SELECT c=18
+#: ultralcd.cpp:4451
+msgid "Select language"
+msgstr ""
+
+# MSG_SELFTEST_OK c=20
+#: ultralcd.cpp:7679
+msgid "Self test OK"
+msgstr ""
+
+# MSG_SELFTEST_START c=20
+#: ultralcd.cpp:7447
+msgid "Self test start"
+msgstr ""
+
+# MSG_SELFTEST c=18
+#: ultralcd.cpp:5780
+msgid "Selftest"
+msgstr ""
+
+# MSG_SELFTEST_ERROR c=20
+#: ultralcd.cpp:8121
+msgid "Selftest error!"
+msgstr ""
+
+# MSG_SELFTEST_FAILED c=20
+#: messages.c:90
+msgid "Selftest failed"
+msgstr ""
+
+# MSG_FORCE_SELFTEST c=20 r=8
+#: Marlin_main.cpp:1637
+msgid "Selftest will be run to calibrate accurate sensorless rehoming."
+msgstr ""
+
+# MSG_SEL_PREHEAT_TEMP c=20 r=6
+#: ultralcd.cpp:4998
+msgid "Select nozzle preheat temperature which matches your material."
+msgstr ""
+
+# MSG_SET_TEMPERATURE c=20
+#: ultralcd.cpp:3135
+msgid "Set temperature:"
+msgstr ""
+
+# MSG_SETTINGS c=18
+#: messages.c:99
+msgid "Settings"
+msgstr ""
+
+# MSG_SHOW_END_STOPS c=18
+#: ultralcd.cpp:5801
+msgid "Show end stops"
+msgstr ""
+
+# MSG_FILE_CNT c=20 r=6
+#: cardreader.cpp:817
+msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
+msgstr ""
+
+# MSG_SORT c=7
+#: messages.c:139
+msgid "Sort"
+msgstr ""
+
+# MSG_NONE c=8
+#: messages.c:129
+msgid "None"
+msgstr ""
+
+# MSG_SORT_TIME c=8
+#: messages.c:140
+msgid "Time"
+msgstr ""
+
+# MSG_SEVERE_SKEW c=14
+#: ultralcd.cpp:2888
+msgid "Severe skew"
+msgstr ""
+
+# MSG_SORT_ALPHA c=8
+#: messages.c:141
+msgid "Alphabet"
+msgstr ""
+
+# MSG_SORTING c=20
+#: cardreader.cpp:880
+msgid "Sorting files"
+msgstr ""
+
+# MSG_SOUND_LOUD c=7
+#: messages.c:144
+msgid "Loud"
+msgstr ""
+
+# MSG_SLIGHT_SKEW c=14
+#: ultralcd.cpp:2887
+msgid "Slight skew"
+msgstr ""
+
+# MSG_SOUND c=7
+#: messages.c:143
+msgid "Sound"
+msgstr ""
+
+# MSG_RUNOUTS c=7
+#: ultralcd.cpp:1593
+msgid "Runouts"
+msgstr ""
+
+# MSG_Z-LEVELING_ENFORCED c=20 r=4
+#: Marlin_main.cpp:3303
+msgid "Some problem encountered, Z-leveling enforced ..."
+msgstr ""
+
+# MSG_SOUND_ONCE c=7
+#: messages.c:145
+msgid "Once"
+msgstr ""
+
+# MSG_SPEED c=15
+#: ultralcd.cpp:6882
+msgid "Speed"
+msgstr ""
+
+# MSG_SELFTEST_FAN_YES c=19
+#: messages.c:93
+msgid "Spinning"
+msgstr ""
+
+# MSG_TEMP_CAL_WARNING c=20 r=4
+#: Marlin_main.cpp:5351
+msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
+msgstr ""
+
+# MSG_STATISTICS c=18
+#: ultralcd.cpp:6081
+msgid "Statistics"
+msgstr ""
+
+# MSG_STOP_PRINT c=18
+#: messages.c:110
+msgid "Stop print"
+msgstr ""
+
+# MSG_STOPPED c=20
+#: messages.c:111
+msgid "STOPPED."
+msgstr ""
+
+# MSG_SUPPORT c=18
+#: ultralcd.cpp:6756
+msgid "Support"
+msgstr ""
+
+# MSG_SELFTEST_SWAPPED c=16
+#: ultralcd.cpp:8180
+msgid "Swapped"
+msgstr ""
+
+# MSG_SELECT_FILAMENT c=20
+#: ultralcd.cpp:4706
+msgid "Select filament:"
+msgstr ""
+
+# MSG_TEMP_CALIBRATION c=14
+#: messages.c:112
+msgid "Temp. cal."
+msgstr ""
+
+# MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
+#: ultralcd.cpp:4847
+msgid "Select temperature which matches your material."
+msgstr ""
+
+# MSG_CALIBRATION_PINDA_MENU c=17
+#: ultralcd.cpp:5812
+msgid "Temp. calibration"
+msgstr ""
+
+# MSG_TEMP_CAL_FAILED c=20 r=8
+#: ultralcd.cpp:3771
+msgid "Temperature calibration failed"
+msgstr ""
+
+# MSG_TEMP_CALIBRATION_DONE c=20 r=12
+#: messages.c:113
+msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
+msgstr ""
+
+# MSG_FS_VERIFIED c=20 r=3
+#: ultralcd.cpp:7411
+msgid "Sensor verified, remove the filament now."
+msgstr ""
+
+# MSG_TEMPERATURE c=18
+#: ultralcd.cpp:5673
+msgid "Temperature"
+msgstr ""
+
+# MSG_MENU_TEMPERATURES c=15
+#: ultralcd.cpp:2047
+msgid "Temperatures"
+msgstr ""
+
+# MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
+#: messages.c:47
+msgid "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
+msgstr ""
+
+# MSG_TOTAL_FILAMENT c=19
+#: ultralcd.cpp:2735
+msgid "Total filament"
+msgstr ""
+
+# MSG_TOTAL_PRINT_TIME c=19
+#: ultralcd.cpp:2736
+msgid "Total print time"
+msgstr ""
+
+# MSG_TUNE c=18
+#: ultralcd.cpp:6653
+msgid "Tune"
+msgstr ""
+
+# MSG_TOTAL_FAILURES c=20
+#: messages.c:101
+msgid "Total failures"
+msgstr ""
+
+# MSG_TO_LOAD_FIL c=20
+#: ultralcd.cpp:2137
+msgid "to load filament"
+msgstr ""
+
+# MSG_TO_UNLOAD_FIL c=20
+#: ultralcd.cpp:2141
+msgid "to unload filament"
+msgstr ""
+
+# MSG_UNLOAD_FILAMENT c=16
+#: messages.c:114
+msgid "Unload filament"
+msgstr ""
+
+# MSG_UNLOADING_FILAMENT c=20
+#: messages.c:115
+msgid "Unloading filament"
+msgstr ""
+
+# MSG_TOTAL c=6
+#: messages.c:100
+msgid "Total"
+msgstr ""
+
+# MSG_USED c=19
+#: ultralcd.cpp:5928
+msgid "Used during print"
+msgstr ""
+
+# MSG_MENU_VOLTAGES c=15
+#: ultralcd.cpp:2050
+msgid "Voltages"
+msgstr ""
+
+# MSG_UNKNOWN c=13
+#: ultralcd.cpp:2005
+msgid "unknown"
+msgstr ""
+
+# MSG_USERWAIT c=20
+#: Marlin_main.cpp:4347
+msgid "Wait for user..."
+msgstr ""
+
+# MSG_WAITING_TEMP c=20 r=4
+#: ultralcd.cpp:3283
+msgid "Waiting for nozzle and bed cooling"
+msgstr ""
+
+# MSG_WAITING_TEMP_PINDA c=20 r=3
+#: ultralcd.cpp:3244
+msgid "Waiting for PINDA probe cooling"
+msgstr ""
+
+# MSG_CHANGED_BOTH c=20 r=4
+#: Marlin_main.cpp:1597
+msgid "Warning: both printer type and motherboard type changed."
+msgstr ""
+
+# MSG_CHANGED_MOTHERBOARD c=20 r=4
+#: Marlin_main.cpp:1589
+msgid "Warning: motherboard type changed."
+msgstr ""
+
+# MSG_CHANGED_PRINTER c=20 r=4
+#: Marlin_main.cpp:1593
+msgid "Warning: printer type changed."
+msgstr ""
+
+# MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#: Marlin_main.cpp:3789
+msgid "Was filament unload successful?"
+msgstr ""
+
+# MSG_SELFTEST_WIRINGERROR c=18
+#: messages.c:98
+msgid "Wiring error"
+msgstr ""
+
+# MSG_WIZARD c=17
+#: ultralcd.cpp:5771
+msgid "Wizard"
+msgstr ""
+
+# MSG_XYZ_DETAILS c=18
+#: ultralcd.cpp:2039
+msgid "XYZ cal. details"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
+#: messages.c:18
+msgid "XYZ calibration failed. Please consult the manual."
+msgstr ""
+
+# MSG_YES c=3
+#: messages.c:123
+msgid "Yes"
+msgstr ""
+
+# MSG_WIZARD_QUIT c=20 r=8
+#: messages.c:120
+msgid "You can always resume the Wizard from Calibration -> Wizard."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
+#: ultralcd.cpp:3743
+msgid "XYZ calibration all right. Skew will be corrected automatically."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
+#: ultralcd.cpp:3740
+msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
+msgstr ""
+
+# MSG_TIMEOUT c=12
+#: messages.c:157
+msgid "Timeout"
+msgstr ""
+
+# MSG_X_CORRECTION c=13
+#: ultralcd.cpp:5086
+msgid "X-correct:"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
+#: ultralcd.cpp:3737
+msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
+#: ultralcd.cpp:3721
+msgid "XYZ calibration compromised. Front calibration points not reachable."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
+#: ultralcd.cpp:3724
+msgid "XYZ calibration compromised. Right front calibration point not reachable."
+msgstr ""
+
+# MSG_LOAD_ALL c=17
+#: ultralcd.cpp:6167
+msgid "Load all"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
+#: ultralcd.cpp:3703
+msgid "XYZ calibration failed. Bed calibration point was not found."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
+#: ultralcd.cpp:3709
+msgid "XYZ calibration failed. Front calibration points not reachable."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
+#: ultralcd.cpp:3712
+msgid "XYZ calibration failed. Right front calibration point not reachable."
+msgstr ""
+
+# MSG_Y_DIST_FROM_MIN c=20
+#: ultralcd.cpp:2842
+msgid "Y distance from min"
+msgstr ""
+
+# MSG_WIZARD_V2_CAL_2 c=20 r=12
+#: ultralcd.cpp:4850
+msgid "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
+msgstr ""
+
+# MSG_FIL_FAILED c=20 r=5
+#: ultralcd.cpp:7415
+msgid "Verification failed, remove the filament and try again."
+msgstr ""
+
+# MSG_Y_CORRECTION c=13
+#: ultralcd.cpp:5087
+msgid "Y-correct:"
+msgstr ""
+
+# MSG_OFF c=3
+#: messages.c:125
+msgid "Off"
+msgstr ""
+
+# MSG_ON c=3
+#: messages.c:126
+msgid "On"
+msgstr ""
+
+# MSG_BACK c=18
+#: messages.c:64
+msgid "Back"
+msgstr ""
+
+# MSG_CHECKS c=18
+#: ultralcd.cpp:5641
+msgid "Checks"
+msgstr ""
+
+# MSG_FALSE_TRIGGERING c=20
+#: ultralcd.cpp:8190
+msgid "False triggering"
+msgstr ""
+
+# MSG_STRICT c=8
+#: messages.c:131
+msgid "Strict"
+msgstr ""
+
+# MSG_WARN c=8
+#: messages.c:130
+msgid "Warn"
+msgstr ""
+
+# MSG_HW_SETUP c=18
+#: messages.c:102
+msgid "HW Setup"
+msgstr ""
+
+# MSG_MAGNETS_COMP c=13
+#: messages.c:150
+msgid "Magnets comp."
+msgstr ""
+
+# MSG_MESH c=12
+#: messages.c:147
+msgid "Mesh"
+msgstr ""
+
+# MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
+#: Marlin_main.cpp:875
+msgid "MK3S firmware detected on MK3 printer"
+msgstr ""
+
+# MSG_MMU_MODE c=8
+#: messages.c:137
+msgid "MMU Mode"
+msgstr ""
+
+# MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
+#: ultralcd.cpp:4366
+msgid "Mode change in progress..."
+msgstr ""
+
+# MSG_MODEL c=8
+#: messages.c:132
+msgid "Model"
+msgstr ""
+
+# MSG_NOZZLE_DIAMETER c=10
+#: messages.c:136
+msgid "Nozzle d."
+msgstr ""
+
+# MSG_GCODE_DIFF_CONTINUE c=20 r=4
+#: util.cpp:414
+msgid "G-code sliced for a different level. Continue?"
+msgstr ""
+
+# MSG_GCODE_DIFF_CANCELLED c=20 r=7
+#: util.cpp:420
+msgid "G-code sliced for a different level. Please re-slice the model again. Print cancelled."
+msgstr ""
+
+# MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
+#: messages.c:134
+msgid "G-code sliced for a different printer type. Continue?"
+msgstr ""
+
+# MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
+#: messages.c:135
+msgid "G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
+msgstr ""
+
+# MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
+#: util.cpp:381
+msgid "G-code sliced for a newer firmware. Continue?"
+msgstr ""
+
+# MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
+#: util.cpp:387
+msgid "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
+msgstr ""
+
+# MSG_PREHEATING_TO_CUT c=20
+#: ultralcd.cpp:2309
+msgid "Preheating to cut"
+msgstr ""
+
+# MSG_PREHEATING_TO_EJECT c=20
+#: ultralcd.cpp:2306
+msgid "Preheating to eject"
+msgstr ""
+
+# MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
+#: util.cpp:294
+msgid "Printer nozzle diameter differs from the G-code. Continue?"
+msgstr ""
+
+# MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
+#: util.cpp:301
+msgid "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
+msgstr ""
+
+# MSG_SELFTEST_FS_LEVEL c=20
+#: ultralcd.cpp:8195
+msgid "%s level expected"
+msgstr ""
+
+# MSG_RENAME c=18
+#: ultralcd.cpp:6579
+msgid "Rename"
+msgstr ""
+
+# MSG_SELECT c=18
+#: ultralcd.cpp:6572
+msgid "Select"
+msgstr ""
+
+# MSG_INFO_SENSORS c=18
+#: ultralcd.cpp:2041
+msgid "Sensor info"
+msgstr ""
+
+# MSG_SHEET c=10
+#: messages.c:65
+msgid "Sheet"
+msgstr ""
+
+# MSG_SOUND_BLIND c=7
+#: messages.c:146
+msgid "Assist"
+msgstr ""
+
+# MSG_STEEL_SHEET c=18
+#: messages.c:66
+msgid "Steel sheets"
+msgstr ""
+
+# MSG_Z_CORRECTION c=13
+#: ultralcd.cpp:5088
+msgid "Z-correct:"
+msgstr ""
+
+# MSG_Z_PROBE_NR c=14
+#: messages.c:149
+msgid "Z-probe nr."
+msgstr ""
+
+# MSG_PRINTER_IP c=18
+#: ultralcd.cpp:2028
+msgid "Printer IP Addr:"
+msgstr ""
+

lang/po/new/sl.po

@@ -0,0 +1,1772 @@
+# Translation of Prusa-Firmware into Slovanian.
+#
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Language: sl\n"
+"Project-Id-Version: Prusa-Firmware\n"
+"POT-Creation-Date: Tue 21 Dec 2021 03:23:03 PM CET\n"
+"PO-Revision-Date: Tue 21 Dec 2021 03:23:03 PM CET\n"
+"Language-Team: \n"
+"X-Generator: Poedit 2.0.7\n"
+"X-Poedit-SourceCharset: UTF-8\n"
+"Last-Translator: \n"
+"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
+
+# MSG_IR_03_OR_OLDER c=18
+#: messages.c:164
+msgid " 0.3 or older"
+msgstr ""
+
+# MSG_FS_V_03_OR_OLDER c=18
+#: Marlin_main.cpp:9884
+msgid "FS v0.3 or older"
+msgstr ""
+
+# MSG_IR_04_OR_NEWER c=18
+#: messages.c:163
+msgid " 0.4 or newer"
+msgstr ""
+
+# MSG_FS_V_04_OR_NEWER c=18
+#: Marlin_main.cpp:9883
+msgid "FS v0.4 or newer"
+msgstr ""
+
+# MSG_IR_UNKNOWN c=18
+#: messages.c:165
+msgid "unknown state"
+msgstr ""
+
+# MSG_MEASURED_OFFSET c=20
+#: ultralcd.cpp:2913
+msgid "[0;0] point offset"
+msgstr ""
+
+# MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
+#: 
+msgid "Crash detection can\x0abe turned on only in\x0aNormal mode"
+msgstr ""
+
+# MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
+#: 
+msgid "WARNING:\x0aCrash detection\x0adisabled in\x0aStealth mode"
+msgstr ""
+
+# MSG_BABYSTEPPING_Z c=15
+#: ultralcd.cpp:3034
+msgid "Adjusting Z:"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_ALLCORRECT c=20
+#: ultralcd.cpp:8490
+msgid "All correct"
+msgstr ""
+
+# MSG_WIZARD_DONE c=20 r=8
+#: messages.c:118
+msgid "All is done. Happy printing!"
+msgstr ""
+
+# MSG_AMBIENT c=14
+#: ultralcd.cpp:1727
+msgid "Ambient"
+msgstr ""
+
+# MSG_AUTO c=6
+#: messages.c:160
+msgid "Auto"
+msgstr ""
+
+# MSG_PRESS c=20 r=2
+#: ultralcd.cpp:2485
+msgid "and press the knob"
+msgstr ""
+
+# MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
+#: ultralcd.cpp:3355
+msgid "Are left and right Z~carriages all up?"
+msgstr ""
+
+# MSG_AUTO_HOME c=18
+#: messages.c:11
+msgid "Auto home"
+msgstr ""
+
+# MSG_AUTOLOAD_FILAMENT c=18
+#: ultralcd.cpp:6732
+msgid "AutoLoad filament"
+msgstr ""
+
+# MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
+#: ultralcd.cpp:4317
+msgid "Autoloading filament available only when filament sensor is turned on..."
+msgstr ""
+
+# MSG_AUTOLOADING_ENABLED c=20 r=4
+#: ultralcd.cpp:2648
+msgid "Autoloading filament is active, just press the knob and insert filament..."
+msgstr ""
+
+# MSG_SELFTEST_AXIS_LENGTH c=20
+#: ultralcd.cpp:8173
+msgid "Axis length"
+msgstr ""
+
+# MSG_SELFTEST_AXIS c=16
+#: ultralcd.cpp:8174
+msgid "Axis"
+msgstr ""
+
+# MSG_SELFTEST_BEDHEATER c=20
+#: ultralcd.cpp:8131
+msgid "Bed/Heater"
+msgstr ""
+
+# MSG_BED_DONE c=20
+#: messages.c:15
+msgid "Bed done"
+msgstr ""
+
+# MSG_BED_HEATING c=20
+#: messages.c:16
+msgid "Bed Heating"
+msgstr ""
+
+# MSG_BED_CORRECTION_MENU c=18
+#: ultralcd.cpp:5798
+msgid "Bed level correct"
+msgstr ""
+
+# MSG_BELTTEST c=18
+#: ultralcd.cpp:5778
+msgid "Belt test"
+msgstr ""
+
+# MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
+#: messages.c:17
+msgid "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for reset."
+msgstr ""
+
+# MSG_BRIGHT c=6
+#: messages.c:158
+msgid "Bright"
+msgstr ""
+
+# MSG_BRIGHTNESS c=18
+#: messages.c:154
+msgid "Brightness"
+msgstr ""
+
+# MSG_BED c=13
+#: messages.c:14
+msgid "Bed"
+msgstr ""
+
+# MSG_BELT_STATUS c=18
+#: messages.c:19
+msgid "Belt status"
+msgstr ""
+
+# MSG_RECOVER_PRINT c=20 r=2
+#: messages.c:82
+msgid "Blackout occurred. Recover print?"
+msgstr ""
+
+# MSG_CALIBRATING_HOME c=20
+#: ultralcd.cpp:8492
+msgid "Calibrating home"
+msgstr ""
+
+# MSG_CALIBRATE_BED c=18
+#: ultralcd.cpp:5787
+msgid "Calibrate XYZ"
+msgstr ""
+
+# MSG_HOMEYZ c=18
+#: messages.c:52
+msgid "Calibrate Z"
+msgstr ""
+
+# MSG_CALIBRATE_PINDA c=17
+#: ultralcd.cpp:4529
+msgid "Calibrate"
+msgstr ""
+
+# MSG_CANCEL2 c=10
+#: messages.c:20
+msgid ">Cancel"
+msgstr ""
+
+# MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
+#: ultralcd.cpp:3318
+msgid "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+msgstr ""
+
+# MSG_CALIBRATE_Z_AUTO c=20 r=2
+#: messages.c:21
+msgid "Calibrating Z"
+msgstr ""
+
+# MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
+#: ultralcd.cpp:3318
+msgid "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+msgstr ""
+
+# MSG_HOMEYZ_DONE c=20
+#: ultralcd.cpp:656
+msgid "Calibration done"
+msgstr ""
+
+# MSG_MENU_CALIBRATION c=18
+#: messages.c:68
+msgid "Calibration"
+msgstr ""
+
+# MSG_SD_REMOVED c=20
+#: ultralcd.cpp:8939
+msgid "Card removed"
+msgstr ""
+
+# MSG_CHECKING_FILE c=17
+#: ultralcd.cpp:8580
+msgid "Checking file"
+msgstr ""
+
+# MSG_NOT_COLOR c=19
+#: ultralcd.cpp:2565
+msgid "Color not correct"
+msgstr ""
+
+# MSG_COOLDOWN c=18
+#: messages.c:27
+msgid "Cooldown"
+msgstr ""
+
+# MSG_COPY_SEL_LANG c=20 r=3
+#: ultralcd.cpp:4435
+msgid "Copy selected language?"
+msgstr ""
+
+# MSG_CRASHDETECT c=13
+#: messages.c:30
+msgid "Crash det."
+msgstr ""
+
+# MSG_CHOOSE_FIL_1ST_LAYERCAL c=20 r=7
+#: ultralcd.cpp:4842
+msgid "Choose a filament for the First Layer Calibration and select it in the on-screen menu."
+msgstr ""
+
+# MSG_CRASH_DETECTED c=20
+#: messages.c:29
+msgid "Crash detected."
+msgstr ""
+
+# MSG_CRASH_RESUME c=20 r=3
+#: Marlin_main.cpp:651
+msgid "Crash detected. Resume print?"
+msgstr ""
+
+# MSG_CRASH c=7
+#: messages.c:28
+msgid "Crash"
+msgstr ""
+
+# MSG_CURRENT c=19
+#: ultralcd.cpp:5929
+msgid "Current"
+msgstr ""
+
+# MSG_DATE c=17
+#: ultralcd.cpp:1985
+msgid "Date:"
+msgstr ""
+
+# MSG_COMMUNITY_MADE c=18
+#: messages.c:25
+msgid "Community made"
+msgstr ""
+
+# MSG_DISABLE_STEPPERS c=18
+#: ultralcd.cpp:5678
+msgid "Disable steppers"
+msgstr ""
+
+# MSG_BABYSTEP_Z_NOT_SET c=20 r=12
+#: messages.c:13
+msgid "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
+msgstr ""
+
+# MSG_FS_CONTINUE c=5
+#: messages.c:152
+msgid "Cont."
+msgstr ""
+
+# MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
+#: ultralcd.cpp:5021
+msgid "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
+msgstr ""
+
+# MSG_EXTRUDER_CORRECTION c=13
+#: ultralcd.cpp:5090
+msgid "E-correct:"
+msgstr ""
+
+# MSG_EJECT_FILAMENT c=16
+#: messages.c:60
+msgid "Eject filament"
+msgstr ""
+
+# MSG_EJECTING_FILAMENT c=20
+#: mmu.cpp:1415
+msgid "Ejecting filament"
+msgstr ""
+
+# MSG_SELFTEST_ENDSTOP_NOTHIT c=20
+#: ultralcd.cpp:8149
+msgid "Endstop not hit"
+msgstr ""
+
+# MSG_SELFTEST_ENDSTOP c=16
+#: ultralcd.cpp:8144
+msgid "Endstop"
+msgstr ""
+
+# MSG_SELFTEST_ENDSTOPS c=20
+#: ultralcd.cpp:8135
+msgid "Endstops"
+msgstr ""
+
+# MSG_STACK_ERROR c=20 r=4
+#: 
+msgid "Error - static memory has been overwritten"
+msgstr ""
+
+# MSG_CUT_FILAMENT c=16
+#: messages.c:61
+msgid "Cut filament"
+msgstr ""
+
+# MSG_CUTTER c=9
+#: messages.c:128
+msgid "Cutter"
+msgstr ""
+
+# MSG_MMU_CUTTING_FIL c=18
+#: mmu.cpp:1387
+msgid "Cutting filament"
+msgstr ""
+
+# MSG_FSENS_NOT_RESPONDING c=20 r=4
+#: ultralcd.cpp:4330
+msgid "ERROR: Filament sensor is not responding, please check connection."
+msgstr ""
+
+# MSG_DIM c=6
+#: messages.c:159
+msgid "Dim"
+msgstr ""
+
+# MSG_ERROR c=10
+#: messages.c:31
+msgid "ERROR:"
+msgstr ""
+
+# MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18
+#: ultralcd.cpp:8498
+msgid "Extruder fan:"
+msgstr ""
+
+# MSG_INFO_EXTRUDER c=18
+#: ultralcd.cpp:2040
+msgid "Extruder info"
+msgstr ""
+
+# MSG_EXTRUDER c=17
+#: messages.c:32
+msgid "Extruder"
+msgstr ""
+
+# MSG_MMU_FAIL_STATS c=18
+#: ultralcd.cpp:6754
+msgid "Fail stats MMU"
+msgstr ""
+
+# MSG_FSENSOR_AUTOLOAD c=13
+#: messages.c:48
+msgid "F. autoload"
+msgstr ""
+
+# MSG_FAIL_STATS c=18
+#: ultralcd.cpp:6751
+msgid "Fail stats"
+msgstr ""
+
+# MSG_FAN_SPEED c=14
+#: messages.c:36
+msgid "Fan speed"
+msgstr ""
+
+# MSG_SELFTEST_FAN c=20
+#: messages.c:91
+msgid "Fan test"
+msgstr ""
+
+# MSG_FANS_CHECK c=13
+#: messages.c:33
+msgid "Fans check"
+msgstr ""
+
+# MSG_FSENSOR c=12
+#: messages.c:49
+msgid "Fil. sensor"
+msgstr ""
+
+# MSG_FIL_RUNOUTS c=15
+#: messages.c:34
+msgid "Fil. runouts"
+msgstr ""
+
+# MSG_FILAMENT_CLEAN c=20 r=2
+#: messages.c:37
+msgid "Filament extruding & with correct color?"
+msgstr ""
+
+# MSG_NOT_LOADED c=19
+#: ultralcd.cpp:2564
+msgid "Filament not loaded"
+msgstr ""
+
+# MSG_FILAMENT_SENSOR c=20
+#: messages.c:97
+msgid "Filament sensor"
+msgstr ""
+
+# MSG_FILAMENT_USED c=19
+#: ultralcd.cpp:2713
+msgid "Filament used"
+msgstr ""
+
+# MSG_PRINT_TIME c=19
+#: ultralcd.cpp:2714
+msgid "Print time"
+msgstr ""
+
+# MSG_FS_ACTION c=10
+#: messages.c:151
+msgid "FS Action"
+msgstr ""
+
+# MSG_FILE_INCOMPLETE c=20 r=3
+#: ultralcd.cpp:8634
+msgid "File incomplete. Continue anyway?"
+msgstr ""
+
+# MSG_FINISHING_MOVEMENTS c=20
+#: messages.c:45
+msgid "Finishing movements"
+msgstr ""
+
+# MSG_V2_CALIBRATION c=18
+#: messages.c:124
+msgid "First layer cal."
+msgstr ""
+
+# MSG_WIZARD_SELFTEST c=20 r=8
+#: ultralcd.cpp:4942
+msgid "First, I will run the selftest to check most common assembly problems."
+msgstr ""
+
+# MSG_MMU_FIX_ISSUE c=20 r=4
+#: mmu.cpp:727
+msgid "Fix the issue and then press button on MMU unit."
+msgstr ""
+
+# MSG_FLOW c=15
+#: ultralcd.cpp:6888
+msgid "Flow"
+msgstr ""
+
+# MSG_SELFTEST_COOLING_FAN c=20
+#: messages.c:88
+msgid "Front print fan?"
+msgstr ""
+
+# MSG_BED_CORRECTION_FRONT c=14
+#: ultralcd.cpp:3116
+msgid "Front side[um]"
+msgstr ""
+
+# MSG_SELFTEST_FANS c=20
+#: ultralcd.cpp:8179
+msgid "Front/left fans"
+msgstr ""
+
+# MSG_SELFTEST_HEATERTHERMISTOR c=20
+#: ultralcd.cpp:8127
+msgid "Heater/Thermistor"
+msgstr ""
+
+# MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
+#: Marlin_main.cpp:9874
+msgid "Heating disabled by safety timer."
+msgstr ""
+
+# MSG_HEATING_COMPLETE c=20
+#: messages.c:51
+msgid "Heating done."
+msgstr ""
+
+# MSG_HEATING c=20
+#: messages.c:50
+msgid "Heating"
+msgstr ""
+
+# MSG_WIZARD_WELCOME c=20 r=7
+#: messages.c:121
+msgid "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
+msgstr "Zivjo, jaz sem vas originalni tiskalnik Prusa i3. Ali zelite, da vas vodim skozi postopek nastavitve?"
+
+# MSG_FILAMENTCHANGE c=18
+#: messages.c:43
+msgid "Change filament"
+msgstr ""
+
+# MSG_CHANGE_SUCCESS c=20
+#: ultralcd.cpp:2494
+msgid "Change success!"
+msgstr ""
+
+# MSG_CORRECTLY c=20
+#: ultralcd.cpp:2562
+msgid "Changed correctly?"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_BED c=20
+#: messages.c:94
+msgid "Checking bed"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_ENDSTOPS c=20
+#: ultralcd.cpp:8481
+msgid "Checking endstops"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_HOTEND c=20
+#: ultralcd.cpp:8487
+msgid "Checking hotend"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_FSENSOR c=20
+#: messages.c:95
+msgid "Checking sensors"
+msgstr ""
+
+# MSG_CHECKING_X c=20
+#: messages.c:23
+msgid "Checking X axis"
+msgstr ""
+
+# MSG_CHECKING_Y c=20
+#: messages.c:24
+msgid "Checking Y axis"
+msgstr ""
+
+# MSG_SELFTEST_CHECK_Z c=20
+#: ultralcd.cpp:8484
+msgid "Checking Z axis"
+msgstr ""
+
+# MSG_CHOOSE_EXTRUDER c=20
+#: messages.c:54
+msgid "Choose extruder:"
+msgstr ""
+
+# MSG_CHOOSE_FILAMENT c=20
+#: messages.c:55
+msgid "Choose filament:"
+msgstr ""
+
+# MSG_FILAMENT c=17
+#: messages.c:35
+msgid "Filament"
+msgstr ""
+
+# MSG_WIZARD_XYZ_CAL c=20 r=8
+#: ultralcd.cpp:4951
+msgid "I will run xyz calibration now. It will take approx. 12 mins."
+msgstr ""
+
+# MSG_WIZARD_Z_CAL c=20 r=8
+#: ultralcd.cpp:4959
+msgid "I will run z calibration now."
+msgstr ""
+
+# MSG_WATCH c=18
+#: messages.c:116
+msgid "Info screen"
+msgstr ""
+
+# MSG_INSERT_FILAMENT c=20
+#: ultralcd.cpp:2482
+msgid "Insert filament"
+msgstr ""
+
+# MSG_FILAMENT_LOADED c=20 r=2
+#: messages.c:38
+msgid "Is filament loaded?"
+msgstr ""
+
+# MSG_STEEL_SHEET_CHECK c=20 r=2
+#: messages.c:109
+msgid "Is steel sheet on heatbed?"
+msgstr ""
+
+# MSG_LAST_PRINT_FAILURES c=20
+#: messages.c:57
+msgid "Last print failures"
+msgstr ""
+
+# MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
+#: messages.c:122
+msgid "Hi, I am your Original Prusa i3 printer. I will guide you through a short setup process, in which the Z-axis will be calibrated. Then, you will be ready to print."
+msgstr ""
+
+# MSG_ADDITIONAL_SHEETS c=20 r=9
+#: ultralcd.cpp:5029
+msgid "If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets."
+msgstr ""
+
+# MSG_LAST_PRINT c=18
+#: messages.c:56
+msgid "Last print"
+msgstr ""
+
+# MSG_SELFTEST_EXTRUDER_FAN c=20
+#: messages.c:89
+msgid "Left hotend fan?"
+msgstr ""
+
+# MSG_LEFT c=10
+#: ultralcd.cpp:2844
+msgid "Left"
+msgstr ""
+
+# MSG_BED_CORRECTION_LEFT c=14
+#: ultralcd.cpp:3114
+msgid "Left side [um]"
+msgstr ""
+
+# MSG_LIN_CORRECTION c=18
+#: ultralcd.cpp:5702
+msgid "Lin. correction"
+msgstr ""
+
+# MSG_BABYSTEP_Z c=18
+#: messages.c:12
+msgid "Live adjust Z"
+msgstr ""
+
+# MSG_INSERT_FIL c=20 r=6
+#: ultralcd.cpp:7380
+msgid "Insert the filament (do not load it) into the extruder and then press the knob."
+msgstr ""
+
+# MSG_LOAD_FILAMENT c=17
+#: messages.c:58
+msgid "Load filament"
+msgstr ""
+
+# MSG_LOADING_COLOR c=20
+#: ultralcd.cpp:2516
+msgid "Loading color"
+msgstr ""
+
+# MSG_LOADING_FILAMENT c=20
+#: messages.c:59
+msgid "Loading filament"
+msgstr ""
+
+# MSG_ITERATION c=12
+#: messages.c:53
+msgid "Iteration"
+msgstr ""
+
+# MSG_LOOSE_PULLEY c=20
+#: ultralcd.cpp:8167
+msgid "Loose pulley"
+msgstr ""
+
+# MSG_LOAD_TO_NOZZLE c=18
+#: ultralcd.cpp:6717
+msgid "Load to nozzle"
+msgstr ""
+
+# MSG_M117_V2_CALIBRATION c=25
+#: messages.c:62
+msgid "M117 First layer cal."
+msgstr ""
+
+# MSG_MAIN c=18
+#: messages.c:63
+msgid "Main"
+msgstr ""
+
+# MSG_BL_HIGH c=12
+#: messages.c:155
+msgid "Level Bright"
+msgstr ""
+
+# MSG_BL_LOW c=12
+#: messages.c:156
+msgid "Level Dimmed"
+msgstr ""
+
+# MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
+#: messages.c:67
+msgid "Measuring reference height of calibration point"
+msgstr ""
+
+# MSG_MESH_BED_LEVELING c=18
+#: messages.c:148
+msgid "Mesh Bed Leveling"
+msgstr ""
+
+# MSG_MMU_OK_RESUMING_POSITION c=20 r=4
+#: mmu.cpp:765
+msgid "MMU OK. Resuming position..."
+msgstr ""
+
+# MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
+#: mmu.cpp:758
+msgid "MMU OK. Resuming temperature..."
+msgstr ""
+
+# MSG_MEASURED_SKEW c=14
+#: ultralcd.cpp:2885
+msgid "Measured skew"
+msgstr ""
+
+# MSG_MMU_FAILS c=15
+#: messages.c:69
+msgid "MMU fails"
+msgstr ""
+
+# MSG_MMU_LOAD_FAILED c=20
+#: mmu.cpp:1587
+msgid "MMU load failed"
+msgstr ""
+
+# MSG_MMU_LOAD_FAILS c=15
+#: messages.c:70
+msgid "MMU load fails"
+msgstr ""
+
+# MSG_MMU_OK_RESUMING c=20 r=4
+#: mmu.cpp:776
+msgid "MMU OK. Resuming..."
+msgstr ""
+
+# MSG_MODE c=6
+#: messages.c:103
+msgid "Mode"
+msgstr ""
+
+# MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
+#: Marlin_main.cpp:882
+msgid "MK3 firmware detected on MK3S printer"
+msgstr ""
+
+# MSG_NORMAL c=7
+#: messages.c:107
+msgid "Normal"
+msgstr ""
+
+# MSG_SILENT c=7
+#: messages.c:106
+msgid "Silent"
+msgstr ""
+
+# MSG_MMU_USER_ATTENTION c=20 r=3
+#: mmu.cpp:722
+msgid "MMU needs user attention."
+msgstr ""
+
+# MSG_MMU_POWER_FAILS c=15
+#: ultralcd.cpp:1517
+msgid "MMU power fails"
+msgstr ""
+
+# MSG_STEALTH c=7
+#: messages.c:108
+msgid "Stealth"
+msgstr ""
+
+# MSG_AUTO_POWER c=10
+#: messages.c:105
+msgid "Auto power"
+msgstr ""
+
+# MSG_HIGH_POWER c=10
+#: messages.c:104
+msgid "High power"
+msgstr ""
+
+# MSG_MMU_CONNECTED c=18
+#: ultralcd.cpp:1997
+msgid "MMU2 connected"
+msgstr ""
+
+# MSG_SELFTEST_MOTOR c=18
+#: messages.c:96
+msgid "Motor"
+msgstr ""
+
+# MSG_MOVE_AXIS c=18
+#: ultralcd.cpp:5677
+msgid "Move axis"
+msgstr ""
+
+# MSG_MOVE_X c=18
+#: ultralcd.cpp:4233
+msgid "Move X"
+msgstr ""
+
+# MSG_MOVE_Y c=18
+#: ultralcd.cpp:4234
+msgid "Move Y"
+msgstr ""
+
+# MSG_MOVE_Z c=18
+#: ultralcd.cpp:4235
+msgid "Move Z"
+msgstr ""
+
+# MSG_NO_MOVE c=20
+#: Marlin_main.cpp:5852
+msgid "No move."
+msgstr ""
+
+# MSG_NO_CARD c=18
+#: ultralcd.cpp:6697
+msgid "No SD card"
+msgstr ""
+
+# MSG_NA c=3
+#: messages.c:127
+msgid "N/A"
+msgstr ""
+
+# MSG_NO c=4
+#: messages.c:71
+msgid "No"
+msgstr ""
+
+# MSG_SELFTEST_NOTCONNECTED c=20
+#: ultralcd.cpp:8128
+msgid "Not connected"
+msgstr ""
+
+# MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
+#: util.cpp:195
+msgid "New firmware version available:"
+msgstr ""
+
+# MSG_SELFTEST_FAN_NO c=19
+#: messages.c:92
+msgid "Not spinning"
+msgstr ""
+
+# MSG_WIZARD_V2_CAL c=20 r=8
+#: ultralcd.cpp:4838
+msgid "Now I will calibrate distance between tip of the nozzle and heatbed surface."
+msgstr ""
+
+# MSG_WIZARD_WILL_PREHEAT c=20 r=4
+#: ultralcd.cpp:4967
+msgid "Now I will preheat nozzle for PLA."
+msgstr ""
+
+# MSG_NOZZLE c=12
+#: messages.c:72
+msgid "Nozzle"
+msgstr ""
+
+# MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
+#: Marlin_main.cpp:1605
+msgid "Old settings found. Default PID, Esteps etc. will be set."
+msgstr ""
+
+# MSG_REMOVE_TEST_PRINT c=20 r=4
+#: ultralcd.cpp:4958
+msgid "Now remove the test print from steel sheet."
+msgstr ""
+
+# MSG_NOZZLE_FAN c=10
+#: ultralcd.cpp:1446
+msgid "Nozzle FAN"
+msgstr ""
+
+# MSG_PAUSE_PRINT c=18
+#: messages.c:74
+msgid "Pause print"
+msgstr ""
+
+# MSG_PID_RUNNING c=20
+#: ultralcd.cpp:1327
+msgid "PID cal."
+msgstr ""
+
+# MSG_PID_FINISHED c=20
+#: ultralcd.cpp:1333
+msgid "PID cal. finished"
+msgstr ""
+
+# MSG_PID_EXTRUDER c=17
+#: ultralcd.cpp:5799
+msgid "PID calibration"
+msgstr ""
+
+# MSG_PINDA_PREHEAT c=20
+#: ultralcd.cpp:683
+msgid "PINDA Heating"
+msgstr ""
+
+# MSG_PAPER c=20 r=10
+#: messages.c:73
+msgid "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
+msgstr ""
+
+# MSG_WIZARD_CLEAN_HEATBED c=20 r=8
+#: ultralcd.cpp:5024
+msgid "Please clean heatbed and then press the knob."
+msgstr ""
+
+# MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
+#: messages.c:26
+msgid "Please clean the nozzle for calibration. Click when done."
+msgstr ""
+
+# MSG_SELFTEST_PLEASECHECK c=20
+#: ultralcd.cpp:8122
+msgid "Please check:"
+msgstr ""
+
+# MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
+#: messages.c:117
+msgid "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
+msgstr ""
+
+# MSG_CHECK_IDLER c=20 r=5
+#: Marlin_main.cpp:3798
+msgid "Please open idler and remove filament manually."
+msgstr ""
+
+# MSG_PLACE_STEEL_SHEET c=20 r=5
+#: messages.c:75
+msgid "Please place steel sheet on heatbed."
+msgstr ""
+
+# MSG_PRESS_TO_UNLOAD c=20 r=4
+#: messages.c:79
+msgid "Please press the knob to unload filament"
+msgstr ""
+
+# MSG_PULL_OUT_FILAMENT c=20 r=4
+#: messages.c:81
+msgid "Please pull out filament immediately"
+msgstr ""
+
+# MSG_EJECT_REMOVE c=20 r=4
+#: mmu.cpp:1421
+msgid "Please remove filament and then press the knob."
+msgstr ""
+
+# MSG_REMOVE_STEEL_SHEET c=20 r=4
+#: messages.c:84
+msgid "Please remove steel sheet from heatbed."
+msgstr ""
+
+# MSG_RUN_XYZ c=20 r=4
+#: Marlin_main.cpp:5338
+msgid "Please run XYZ calibration first."
+msgstr ""
+
+# MSG_UPDATE_MMU2_FW c=20 r=4
+#: mmu.cpp:1341
+msgid "Please update firmware in your MMU2. Waiting for reset."
+msgstr ""
+
+# MSG_PLEASE_WAIT c=20
+#: messages.c:76
+msgid "Please wait"
+msgstr ""
+
+# MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
+#: ultralcd.cpp:4957
+msgid "Please remove shipping helpers first."
+msgstr ""
+
+# MSG_PREHEAT_NOZZLE c=20
+#: messages.c:78
+msgid "Preheat the nozzle!"
+msgstr ""
+
+# MSG_PREHEAT c=18
+#: ultralcd.cpp:6655
+msgid "Preheat"
+msgstr ""
+
+# MSG_WIZARD_HEATING c=20 r=3
+#: messages.c:119
+msgid "Preheating nozzle. Please wait."
+msgstr ""
+
+# MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
+#: util.cpp:199
+msgid "Please upgrade."
+msgstr ""
+
+# MSG_PRESS_TO_PREHEAT c=20 r=4
+#: Marlin_main.cpp:12049
+msgid "Press the knob to preheat nozzle and continue."
+msgstr ""
+
+# MSG_FS_PAUSE c=5
+#: fsensor.cpp:730
+msgid "Pause"
+msgstr ""
+
+# MSG_POWER_FAILURES c=15
+#: messages.c:77
+msgid "Power failures"
+msgstr ""
+
+# MSG_PRINT_ABORTED c=20
+#: messages.c:80
+msgid "Print aborted"
+msgstr ""
+
+# MSG_PREHEATING_TO_LOAD c=20
+#: ultralcd.cpp:2297
+msgid "Preheating to load"
+msgstr ""
+
+# MSG_PREHEATING_TO_UNLOAD c=20
+#: ultralcd.cpp:2302
+msgid "Preheating to unload"
+msgstr ""
+
+# MSG_SELFTEST_PRINT_FAN_SPEED c=18
+#: ultralcd.cpp:8501
+msgid "Print fan:"
+msgstr ""
+
+# MSG_CARD_MENU c=18
+#: messages.c:22
+msgid "Print from SD"
+msgstr ""
+
+# MSG_PRESS_KNOB c=20
+#: ultralcd.cpp:2130
+msgid "Press the knob"
+msgstr ""
+
+# MSG_PRINT_PAUSED c=20
+#: ultralcd.cpp:907
+msgid "Print paused"
+msgstr ""
+
+# MSG_RESUME_NOZZLE_TEMP c=20 r=4
+#: mmu.cpp:726
+msgid "Press the knob to resume nozzle temperature."
+msgstr ""
+
+# MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
+#: messages.c:46
+msgid "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
+msgstr ""
+
+# MSG_PRINT_FAN c=10
+#: ultralcd.cpp:1447
+msgid "Print FAN"
+msgstr ""
+
+# MSG_WIZARD_LOAD_FILAMENT c=20 r=6
+#: ultralcd.cpp:4818
+msgid "Please insert filament into the extruder, then press the knob to load it."
+msgstr ""
+
+# MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
+#: ultralcd.cpp:4813
+msgid "Please insert filament into the first tube of the MMU, then press the knob to load it."
+msgstr ""
+
+# MSG_PLEASE_LOAD_PLA c=20 r=4
+#: ultralcd.cpp:4735
+msgid "Please load filament first."
+msgstr ""
+
+# MSG_BED_CORRECTION_REAR c=14
+#: ultralcd.cpp:3117
+msgid "Rear side [um]"
+msgstr ""
+
+# MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
+#: ultralcd.cpp:7404
+msgid "Please unload the filament first, then repeat this action."
+msgstr ""
+
+# MSG_CHECK_IR_CONNECTION c=20 r=4
+#: ultralcd.cpp:7407
+msgid "Please check the IR sensor connection, unload filament if present."
+msgstr ""
+
+# MSG_RECOVERING_PRINT c=20
+#: Marlin_main.cpp:11393
+msgid "Recovering print"
+msgstr ""
+
+# MSG_REMOVE_OLD_FILAMENT c=20 r=5
+#: mmu.cpp:833
+msgid "Remove old filament and press the knob to start loading new filament."
+msgstr ""
+
+# MSG_CALIBRATE_BED_RESET c=18
+#: ultralcd.cpp:5804
+msgid "Reset XYZ calibr."
+msgstr ""
+
+# MSG_RESET c=14
+#: messages.c:85
+msgid "Reset"
+msgstr ""
+
+# MSG_RESUME_PRINT c=18
+#: messages.c:86
+msgid "Resume print"
+msgstr ""
+
+# MSG_RESUMING_PRINT c=20
+#: messages.c:87
+msgid "Resuming print"
+msgstr ""
+
+# MSG_BED_CORRECTION_RIGHT c=14
+#: ultralcd.cpp:3115
+msgid "Right side[um]"
+msgstr ""
+
+# MSG_RPI_PORT c=13
+#: messages.c:142
+msgid "RPi port"
+msgstr ""
+
+# MSG_WIZARD_RERUN c=20 r=7
+#: ultralcd.cpp:4756
+msgid "Running Wizard will delete current calibration results and start from the beginning. Continue?"
+msgstr ""
+
+# MSG_SD_CARD c=8
+#: messages.c:138
+msgid "SD card"
+msgstr ""
+
+# MSG_RIGHT c=10
+#: ultralcd.cpp:2845
+msgid "Right"
+msgstr ""
+
+# MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
+#: messages.c:44
+msgid "Searching bed calibration point"
+msgstr ""
+
+# MSG_LANGUAGE_SELECT c=18
+#: ultralcd.cpp:4451
+msgid "Select language"
+msgstr ""
+
+# MSG_SELFTEST_OK c=20
+#: ultralcd.cpp:7679
+msgid "Self test OK"
+msgstr ""
+
+# MSG_SELFTEST_START c=20
+#: ultralcd.cpp:7447
+msgid "Self test start"
+msgstr ""
+
+# MSG_SELFTEST c=18
+#: ultralcd.cpp:5780
+msgid "Selftest"
+msgstr ""
+
+# MSG_SELFTEST_ERROR c=20
+#: ultralcd.cpp:8121
+msgid "Selftest error!"
+msgstr ""
+
+# MSG_SELFTEST_FAILED c=20
+#: messages.c:90
+msgid "Selftest failed"
+msgstr ""
+
+# MSG_FORCE_SELFTEST c=20 r=8
+#: Marlin_main.cpp:1637
+msgid "Selftest will be run to calibrate accurate sensorless rehoming."
+msgstr ""
+
+# MSG_SEL_PREHEAT_TEMP c=20 r=6
+#: ultralcd.cpp:4998
+msgid "Select nozzle preheat temperature which matches your material."
+msgstr ""
+
+# MSG_SET_TEMPERATURE c=20
+#: ultralcd.cpp:3135
+msgid "Set temperature:"
+msgstr ""
+
+# MSG_SETTINGS c=18
+#: messages.c:99
+msgid "Settings"
+msgstr ""
+
+# MSG_SHOW_END_STOPS c=18
+#: ultralcd.cpp:5801
+msgid "Show end stops"
+msgstr ""
+
+# MSG_FILE_CNT c=20 r=6
+#: cardreader.cpp:817
+msgid "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
+msgstr ""
+
+# MSG_SORT c=7
+#: messages.c:139
+msgid "Sort"
+msgstr ""
+
+# MSG_NONE c=8
+#: messages.c:129
+msgid "None"
+msgstr ""
+
+# MSG_SORT_TIME c=8
+#: messages.c:140
+msgid "Time"
+msgstr ""
+
+# MSG_SEVERE_SKEW c=14
+#: ultralcd.cpp:2888
+msgid "Severe skew"
+msgstr ""
+
+# MSG_SORT_ALPHA c=8
+#: messages.c:141
+msgid "Alphabet"
+msgstr ""
+
+# MSG_SORTING c=20
+#: cardreader.cpp:880
+msgid "Sorting files"
+msgstr ""
+
+# MSG_SOUND_LOUD c=7
+#: messages.c:144
+msgid "Loud"
+msgstr ""
+
+# MSG_SLIGHT_SKEW c=14
+#: ultralcd.cpp:2887
+msgid "Slight skew"
+msgstr ""
+
+# MSG_SOUND c=7
+#: messages.c:143
+msgid "Sound"
+msgstr ""
+
+# MSG_RUNOUTS c=7
+#: ultralcd.cpp:1593
+msgid "Runouts"
+msgstr ""
+
+# MSG_Z-LEVELING_ENFORCED c=20 r=4
+#: Marlin_main.cpp:3303
+msgid "Some problem encountered, Z-leveling enforced ..."
+msgstr ""
+
+# MSG_SOUND_ONCE c=7
+#: messages.c:145
+msgid "Once"
+msgstr ""
+
+# MSG_SPEED c=15
+#: ultralcd.cpp:6882
+msgid "Speed"
+msgstr ""
+
+# MSG_SELFTEST_FAN_YES c=19
+#: messages.c:93
+msgid "Spinning"
+msgstr ""
+
+# MSG_TEMP_CAL_WARNING c=20 r=4
+#: Marlin_main.cpp:5351
+msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
+msgstr ""
+
+# MSG_STATISTICS c=18
+#: ultralcd.cpp:6081
+msgid "Statistics"
+msgstr ""
+
+# MSG_STOP_PRINT c=18
+#: messages.c:110
+msgid "Stop print"
+msgstr ""
+
+# MSG_STOPPED c=20
+#: messages.c:111
+msgid "STOPPED."
+msgstr ""
+
+# MSG_SUPPORT c=18
+#: ultralcd.cpp:6756
+msgid "Support"
+msgstr ""
+
+# MSG_SELFTEST_SWAPPED c=16
+#: ultralcd.cpp:8180
+msgid "Swapped"
+msgstr ""
+
+# MSG_SELECT_FILAMENT c=20
+#: ultralcd.cpp:4706
+msgid "Select filament:"
+msgstr ""
+
+# MSG_TEMP_CALIBRATION c=14
+#: messages.c:112
+msgid "Temp. cal."
+msgstr ""
+
+# MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
+#: ultralcd.cpp:4847
+msgid "Select temperature which matches your material."
+msgstr ""
+
+# MSG_CALIBRATION_PINDA_MENU c=17
+#: ultralcd.cpp:5812
+msgid "Temp. calibration"
+msgstr ""
+
+# MSG_TEMP_CAL_FAILED c=20 r=8
+#: ultralcd.cpp:3771
+msgid "Temperature calibration failed"
+msgstr ""
+
+# MSG_TEMP_CALIBRATION_DONE c=20 r=12
+#: messages.c:113
+msgid "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
+msgstr ""
+
+# MSG_FS_VERIFIED c=20 r=3
+#: ultralcd.cpp:7411
+msgid "Sensor verified, remove the filament now."
+msgstr ""
+
+# MSG_TEMPERATURE c=18
+#: ultralcd.cpp:5673
+msgid "Temperature"
+msgstr ""
+
+# MSG_MENU_TEMPERATURES c=15
+#: ultralcd.cpp:2047
+msgid "Temperatures"
+msgstr ""
+
+# MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
+#: messages.c:47
+msgid "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
+msgstr ""
+
+# MSG_TOTAL_FILAMENT c=19
+#: ultralcd.cpp:2735
+msgid "Total filament"
+msgstr ""
+
+# MSG_TOTAL_PRINT_TIME c=19
+#: ultralcd.cpp:2736
+msgid "Total print time"
+msgstr ""
+
+# MSG_TUNE c=18
+#: ultralcd.cpp:6653
+msgid "Tune"
+msgstr ""
+
+# MSG_TOTAL_FAILURES c=20
+#: messages.c:101
+msgid "Total failures"
+msgstr ""
+
+# MSG_TO_LOAD_FIL c=20
+#: ultralcd.cpp:2137
+msgid "to load filament"
+msgstr ""
+
+# MSG_TO_UNLOAD_FIL c=20
+#: ultralcd.cpp:2141
+msgid "to unload filament"
+msgstr ""
+
+# MSG_UNLOAD_FILAMENT c=16
+#: messages.c:114
+msgid "Unload filament"
+msgstr ""
+
+# MSG_UNLOADING_FILAMENT c=20
+#: messages.c:115
+msgid "Unloading filament"
+msgstr ""
+
+# MSG_TOTAL c=6
+#: messages.c:100
+msgid "Total"
+msgstr ""
+
+# MSG_USED c=19
+#: ultralcd.cpp:5928
+msgid "Used during print"
+msgstr ""
+
+# MSG_MENU_VOLTAGES c=15
+#: ultralcd.cpp:2050
+msgid "Voltages"
+msgstr ""
+
+# MSG_UNKNOWN c=13
+#: ultralcd.cpp:2005
+msgid "unknown"
+msgstr ""
+
+# MSG_USERWAIT c=20
+#: Marlin_main.cpp:4347
+msgid "Wait for user..."
+msgstr ""
+
+# MSG_WAITING_TEMP c=20 r=4
+#: ultralcd.cpp:3283
+msgid "Waiting for nozzle and bed cooling"
+msgstr ""
+
+# MSG_WAITING_TEMP_PINDA c=20 r=3
+#: ultralcd.cpp:3244
+msgid "Waiting for PINDA probe cooling"
+msgstr ""
+
+# MSG_CHANGED_BOTH c=20 r=4
+#: Marlin_main.cpp:1597
+msgid "Warning: both printer type and motherboard type changed."
+msgstr ""
+
+# MSG_CHANGED_MOTHERBOARD c=20 r=4
+#: Marlin_main.cpp:1589
+msgid "Warning: motherboard type changed."
+msgstr ""
+
+# MSG_CHANGED_PRINTER c=20 r=4
+#: Marlin_main.cpp:1593
+msgid "Warning: printer type changed."
+msgstr ""
+
+# MSG_UNLOAD_SUCCESSFUL c=20 r=2
+#: Marlin_main.cpp:3789
+msgid "Was filament unload successful?"
+msgstr ""
+
+# MSG_SELFTEST_WIRINGERROR c=18
+#: messages.c:98
+msgid "Wiring error"
+msgstr ""
+
+# MSG_WIZARD c=17
+#: ultralcd.cpp:5771
+msgid "Wizard"
+msgstr ""
+
+# MSG_XYZ_DETAILS c=18
+#: ultralcd.cpp:2039
+msgid "XYZ cal. details"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
+#: messages.c:18
+msgid "XYZ calibration failed. Please consult the manual."
+msgstr ""
+
+# MSG_YES c=3
+#: messages.c:123
+msgid "Yes"
+msgstr ""
+
+# MSG_WIZARD_QUIT c=20 r=8
+#: messages.c:120
+msgid "You can always resume the Wizard from Calibration -> Wizard."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
+#: ultralcd.cpp:3743
+msgid "XYZ calibration all right. Skew will be corrected automatically."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
+#: ultralcd.cpp:3740
+msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
+msgstr ""
+
+# MSG_TIMEOUT c=12
+#: messages.c:157
+msgid "Timeout"
+msgstr ""
+
+# MSG_X_CORRECTION c=13
+#: ultralcd.cpp:5086
+msgid "X-correct:"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
+#: ultralcd.cpp:3737
+msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
+#: ultralcd.cpp:3721
+msgid "XYZ calibration compromised. Front calibration points not reachable."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
+#: ultralcd.cpp:3724
+msgid "XYZ calibration compromised. Right front calibration point not reachable."
+msgstr ""
+
+# MSG_LOAD_ALL c=17
+#: ultralcd.cpp:6167
+msgid "Load all"
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
+#: ultralcd.cpp:3703
+msgid "XYZ calibration failed. Bed calibration point was not found."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
+#: ultralcd.cpp:3709
+msgid "XYZ calibration failed. Front calibration points not reachable."
+msgstr ""
+
+# MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
+#: ultralcd.cpp:3712
+msgid "XYZ calibration failed. Right front calibration point not reachable."
+msgstr ""
+
+# MSG_Y_DIST_FROM_MIN c=20
+#: ultralcd.cpp:2842
+msgid "Y distance from min"
+msgstr ""
+
+# MSG_WIZARD_V2_CAL_2 c=20 r=12
+#: ultralcd.cpp:4850
+msgid "The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter)."
+msgstr ""
+
+# MSG_FIL_FAILED c=20 r=5
+#: ultralcd.cpp:7415
+msgid "Verification failed, remove the filament and try again."
+msgstr ""
+
+# MSG_Y_CORRECTION c=13
+#: ultralcd.cpp:5087
+msgid "Y-correct:"
+msgstr ""
+
+# MSG_OFF c=3
+#: messages.c:125
+msgid "Off"
+msgstr ""
+
+# MSG_ON c=3
+#: messages.c:126
+msgid "On"
+msgstr ""
+
+# MSG_BACK c=18
+#: messages.c:64
+msgid "Back"
+msgstr ""
+
+# MSG_CHECKS c=18
+#: ultralcd.cpp:5641
+msgid "Checks"
+msgstr ""
+
+# MSG_FALSE_TRIGGERING c=20
+#: ultralcd.cpp:8190
+msgid "False triggering"
+msgstr ""
+
+# MSG_STRICT c=8
+#: messages.c:131
+msgid "Strict"
+msgstr ""
+
+# MSG_WARN c=8
+#: messages.c:130
+msgid "Warn"
+msgstr ""
+
+# MSG_HW_SETUP c=18
+#: messages.c:102
+msgid "HW Setup"
+msgstr ""
+
+# MSG_MAGNETS_COMP c=13
+#: messages.c:150
+msgid "Magnets comp."
+msgstr ""
+
+# MSG_MESH c=12
+#: messages.c:147
+msgid "Mesh"
+msgstr ""
+
+# MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
+#: Marlin_main.cpp:875
+msgid "MK3S firmware detected on MK3 printer"
+msgstr ""
+
+# MSG_MMU_MODE c=8
+#: messages.c:137
+msgid "MMU Mode"
+msgstr ""
+
+# MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
+#: ultralcd.cpp:4366
+msgid "Mode change in progress..."
+msgstr ""
+
+# MSG_MODEL c=8
+#: messages.c:132
+msgid "Model"
+msgstr ""
+
+# MSG_NOZZLE_DIAMETER c=10
+#: messages.c:136
+msgid "Nozzle d."
+msgstr ""
+
+# MSG_GCODE_DIFF_CONTINUE c=20 r=4
+#: util.cpp:414
+msgid "G-code sliced for a different level. Continue?"
+msgstr ""
+
+# MSG_GCODE_DIFF_CANCELLED c=20 r=7
+#: util.cpp:420
+msgid "G-code sliced for a different level. Please re-slice the model again. Print cancelled."
+msgstr ""
+
+# MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
+#: messages.c:134
+msgid "G-code sliced for a different printer type. Continue?"
+msgstr ""
+
+# MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
+#: messages.c:135
+msgid "G-code sliced for a different printer type. Please re-slice the model again. Print cancelled."
+msgstr ""
+
+# MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
+#: util.cpp:381
+msgid "G-code sliced for a newer firmware. Continue?"
+msgstr ""
+
+# MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
+#: util.cpp:387
+msgid "G-code sliced for a newer firmware. Please update the firmware. Print cancelled."
+msgstr ""
+
+# MSG_PREHEATING_TO_CUT c=20
+#: ultralcd.cpp:2309
+msgid "Preheating to cut"
+msgstr ""
+
+# MSG_PREHEATING_TO_EJECT c=20
+#: ultralcd.cpp:2306
+msgid "Preheating to eject"
+msgstr ""
+
+# MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
+#: util.cpp:294
+msgid "Printer nozzle diameter differs from the G-code. Continue?"
+msgstr ""
+
+# MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
+#: util.cpp:301
+msgid "Printer nozzle diameter differs from the G-code. Please check the value in settings. Print cancelled."
+msgstr ""
+
+# MSG_SELFTEST_FS_LEVEL c=20
+#: ultralcd.cpp:8195
+msgid "%s level expected"
+msgstr ""
+
+# MSG_RENAME c=18
+#: ultralcd.cpp:6579
+msgid "Rename"
+msgstr ""
+
+# MSG_SELECT c=18
+#: ultralcd.cpp:6572
+msgid "Select"
+msgstr ""
+
+# MSG_INFO_SENSORS c=18
+#: ultralcd.cpp:2041
+msgid "Sensor info"
+msgstr ""
+
+# MSG_SHEET c=10
+#: messages.c:65
+msgid "Sheet"
+msgstr ""
+
+# MSG_SOUND_BLIND c=7
+#: messages.c:146
+msgid "Assist"
+msgstr ""
+
+# MSG_STEEL_SHEET c=18
+#: messages.c:66
+msgid "Steel sheets"
+msgstr ""
+
+# MSG_Z_CORRECTION c=13
+#: ultralcd.cpp:5088
+msgid "Z-correct:"
+msgstr ""
+
+# MSG_Z_PROBE_NR c=14
+#: messages.c:149
+msgid "Z-probe nr."
+msgstr ""
+
+# MSG_PRINTER_IP c=18
+#: ultralcd.cpp:2028
+msgid "Printer IP Addr:"
+msgstr ""
+