Extrude mintemp lowered for wax filaments support

Firmware/variants/1_75mm-RAMBo10a-E3Dv6full.h

@@ -76,7 +76,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 86.085
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   8

Firmware/variants/1_75mm-RAMBo10a-E3Dv6lite.h

@@ -76,7 +76,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 86.085
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   8

Firmware/variants/1_75mm-RAMBo13a-E3Dv6full.h

@@ -76,7 +76,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 86.085
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   8

Firmware/variants/1_75mm-RAMBo13a-E3Dv6lite.h

@@ -76,7 +76,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 86.085
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   8

Firmware/variants/1_7dev-RAMBo13a-E3Dv6lite.h

@@ -79,7 +79,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 86.085
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   8

Firmware/variants/3mm-RAMBo10a-PrusaNmk2.h

@@ -78,7 +78,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 37.4
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   6

Firmware/variants/3mm-RAMBo13a-PrusaNmk2.h

@@ -78,7 +78,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define  DEFAULT_Kd 37.4
 
 // Extrude mintemp
-#define EXTRUDE_MINTEMP 190
+#define EXTRUDE_MINTEMP 130
 
 // Extruder cooling fans
 #define EXTRUDER_0_AUTO_FAN_PIN   6