|
@@ -59,7 +59,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|
|
// Travel limits after homing
|
|
|
#define X_MAX_POS 255
|
|
|
#define X_MIN_POS 0
|
|
|
-#define Y_MAX_POS 210
|
|
|
+#define Y_MAX_POS 212.5
|
|
|
#define Y_MIN_POS -4 //orig -4
|
|
|
#define Z_MAX_POS 210
|
|
|
#define Z_MIN_POS 0.15
|
|
@@ -76,7 +76,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|
|
#define NUM_AXIS 4 // The axis order in all axis related arrays is X, Y, Z, E
|
|
|
#define HOMING_FEEDRATE {3000, 3000, 800, 0} // set the homing speeds (mm/min) // 3000 is also valid for stallGuard homing. Valid range: 2200 - 3000
|
|
|
|
|
|
-#define DEFAULT_Y_OFFSET 4.f // Offset of [0;0] point, when the printer is not calibrated
|
|
|
+#define DEFAULT_Y_OFFSET 2.f // Offset of [0;0] point, when the printer is not calibrated
|
|
|
|
|
|
#define DEFAULT_MAX_FEEDRATE {200, 200, 12, 120} // (mm/sec) max feedrate (M203)
|
|
|
#define DEFAULT_MAX_ACCELERATION {1000, 1000, 200, 5000} // (mm/sec^2) max acceleration (M201)
|
|
@@ -408,7 +408,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
|
|
|
#define MESH_HOME_Z_SEARCH 5 //Z lift for homing, mesh bed leveling etc.
|
|
|
|
|
|
#define X_PROBE_OFFSET_FROM_EXTRUDER 23 // Z probe to nozzle X offset: -left +right
|
|
|
-#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Z probe to nozzle Y offset: -front +behind
|
|
|
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 3 // Z probe to nozzle Y offset: -front +behind
|
|
|
#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.4 // Z probe to nozzle Z offset: -below (always!)
|
|
|
#endif
|
|
|
|