Merge pull request #2809 from leptun/PFW-1134-ALTFAN_KILLSWITCH

Pfw 1134

Firmware/Dcodes.cpp

@@ -1,5 +1,5 @@
 #include "Dcodes.h"
-//#include "Marlin.h"
+#include "Marlin.h"
 #include "Configuration.h"
 #include "language.h"
 #include "cmdqueue.h"
@@ -226,9 +226,7 @@ void dcode_0()
 	LOG("D0 - Reset\n");
 	if (code_seen('B')) //bootloader
 	{
-		cli();
-		wdt_enable(WDTO_15MS);
-		while(1);
+		softReset();
 	}
 	else //reset
 	{
@@ -252,8 +250,7 @@ void dcode_1()
 	cli();
 	for (int i = 0; i < 8192; i++)
 		eeprom_write_byte((unsigned char*)i, (unsigned char)0xff);
-	wdt_enable(WDTO_15MS);
-	while(1);
+	softReset();
 }
 
     /*!
@@ -420,8 +417,7 @@ void dcode_5()
 		boot_dst_addr = (uint32_t)address;
 		boot_src_addr = (uint32_t)(&data);
 		bootapp_print_vars();
-		wdt_enable(WDTO_15MS);
-		while(1);
+		softReset();
 	}
 	while (count)
 	{
@@ -467,8 +463,7 @@ void dcode_7()
 	boot_copy_size = (uint16_t)0xc00;
 	boot_src_addr = (uint32_t)0x0003e400;
 	boot_dst_addr = (uint32_t)0x0003f400;
-	wdt_enable(WDTO_15MS);
-	while(1);
+	softReset();
 */
 }
 

Firmware/Marlin.h

@@ -512,4 +512,6 @@ void load_filament_final_feed();
 void marlin_wait_for_click();
 void raise_z_above(float target, bool plan=true);
 
+extern "C" void softReset();
+
 #endif

Firmware/Marlin_main.cpp

@@ -648,6 +648,12 @@ void failstats_reset_print()
 #endif
 }
 
+void softReset()
+{
+    cli();
+    wdt_enable(WDTO_15MS);
+    while(1);
+}
 
 
 #ifdef MESH_BED_LEVELING
@@ -762,6 +768,7 @@ static void factory_reset(char level)
 				}
 
 			}
+			softReset();
 
 
 			break;
@@ -3813,9 +3820,7 @@ void process_commands()
 #if (defined(WATCHDOG) && (MOTHERBOARD == BOARD_EINSY_1_0a))
                 boot_app_magic = BOOT_APP_MAGIC;
                 boot_app_flags = BOOT_APP_FLG_RUN;
-				wdt_enable(WDTO_15MS);
-				cli();
-				while(1);
+                softReset();
 #else //WATCHDOG
                 asm volatile("jmp 0x3E000");
 #endif //WATCHDOG
@@ -11716,7 +11721,6 @@ void disable_force_z()
 #endif // TMC2130
 }
 
-
 void enable_force_z()
 {
 if(bEnableForce_z)

Firmware/bootapp.c

@@ -9,6 +9,8 @@
 extern FILE _uartout;
 #define uartout (&_uartout)
 
+extern void softReset();
+
 void bootapp_print_vars(void)
 {
 	fprintf_P(uartout, PSTR("boot_src_addr  =0x%08lx\n"), boot_src_addr);
@@ -39,8 +41,7 @@ void bootapp_ram2flash(uint16_t rptr, uint16_t fptr, uint16_t size)
 	boot_src_addr = (uint32_t)rptr;
 	boot_dst_addr = (uint32_t)fptr;
 	bootapp_print_vars();
-	wdt_enable(WDTO_15MS);
-	while(1);
+	softReset();
 }
 
 void bootapp_reboot_user0(uint8_t reserved)
@@ -50,6 +51,5 @@ void bootapp_reboot_user0(uint8_t reserved)
 	boot_app_flags = BOOT_APP_FLG_USER0;
 	boot_reserved = reserved;
 	bootapp_print_vars();
-	wdt_enable(WDTO_15MS);
-	while(1);
+	softReset();
 }

Firmware/eeprom.h

@@ -359,8 +359,12 @@ static_assert(sizeof(Sheets) == EEPROM_SHEETS_SIZEOF, "Sizeof(Sheets) is not EEP
 | ^					| ^			| ^										| 00h 0			| ^						| LCD backlight mode: __Dim__						| ^				| ^
 | 0x0D30 3376		| uint16	| EEPROM_BACKLIGHT_TIMEOUT				| 01 00 - ff ff | 0a 00h 65535			| LCD backlight timeout: __10__ seconds				| LCD menu		| D3 Ax0d30 C2
 | 0x0D2C 3372		| float		| EEPROM_UVLO_LA_K						| ???			| ff ff ff ffh			| Power panic saved Linear Advanced K value			| ???			| D3 Ax0d2c C4
-| 0x0D2B 3371		| uint8		| EEPROM_ALTFAN_OVERRIDE				| 0-1			| 00h 0					| ALTFAN override									| LCD menu		| D3 Ax0d2b C1
-| 0x0D2A 3370		| uint8		| EEPROM_EXPERIMENTAL_VISIBILITY		| 0-1			| 00h 0					| Experimental menu visibility						| LCD menu		| D3 Ax0d2a C1
+| 0x0D2B 3371		| uint8		| EEPROM_ALTFAN_OVERRIDE				| ffh 255		| ffh 255				| ALTFAN override unknown state						| LCD menu		| D3 Ax0d2b C1
+| ^					| ^			| ^										| 00h 0			| ^						| ALTFAN override deactivated						| ^				| ^
+| ^					| ^			| ^										| 01h 1			| ^						| ALTFAN override activated 						| ^				| ^
+| 0x0D2A 3370		| uint8		| EEPROM_EXPERIMENTAL_VISIBILITY		| ffh 255		| ffh 255				| Experimental menu visibility unknown state		| LCD menu		| D3 Ax0d2a C1
+| ^					| ^			| ^										| 00h 0			| ^						| Experimental menu visibility hidden				| ^				| ^
+| ^					| ^			| ^										| 01h 1			| ^						| Experimental menu visibility visible				| ^				| ^
 
   
 | Address begin		| Bit/Type 	| Name 									| Valid values	| Default/FactoryReset	| Description 										| Gcode/Function| Debug code

Firmware/temperature.cpp

@@ -238,7 +238,7 @@ bool extruder_altfan_detect()
 	uint8_t overrideVal = eeprom_read_byte((uint8_t *)EEPROM_ALTFAN_OVERRIDE);
 	if (overrideVal == EEPROM_EMPTY_VALUE)
 	{
-		overrideVal = 0;
+		overrideVal = (calibration_status() == CALIBRATION_STATUS_CALIBRATED) ? 1 : 0;
 		eeprom_update_byte((uint8_t *)EEPROM_ALTFAN_OVERRIDE, overrideVal);
 	}
 	altfanStatus.altfanOverride = overrideVal;

Firmware/ultralcd.cpp

@@ -2096,9 +2096,6 @@ static void lcd_preheat_menu()
 //! 	@code{.unparsed}
 //! 	| Voltages           |	MSG_MENU_VOLTAGES
 //! 	@endcode
-//!
-//!
-//! 	| Experimental       |	c=18
 //! 
 //! 
 //! If DEBUG_BUILD is defined
@@ -2111,12 +2108,11 @@ static void lcd_preheat_menu()
 static void lcd_support_menu()
 {
 	typedef struct
-	{	// 23bytes total
+	{	// 22bytes total
 		int8_t status;                 // 1byte
 		bool is_flash_air;             // 1byte
 		uint8_t ip[4];                 // 4bytes
 		char ip_str[3*4+3+1];          // 16bytes
-		uint8_t experimental_menu_visibility; // 1byte
 	} _menu_data_t;
     static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
 	_menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
@@ -2131,13 +2127,6 @@ static void lcd_support_menu()
                 _md->ip[0], _md->ip[1], 
                 _md->ip[2], _md->ip[3]);
         
-        _md->experimental_menu_visibility = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
-        if (_md->experimental_menu_visibility == EEPROM_EMPTY_VALUE)
-        {
-            _md->experimental_menu_visibility = 0;
-            eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, _md->experimental_menu_visibility);
-        }
-        
     } else if (_md->is_flash_air && 
         _md->ip[0] == 0 && _md->ip[1] == 0 && 
         _md->ip[2] == 0 && _md->ip[3] == 0 &&
@@ -2222,11 +2211,6 @@ static void lcd_support_menu()
   MENU_ITEM_SUBMENU_P(_i("Voltages"), lcd_menu_voltages);////MSG_MENU_VOLTAGES c=18 r=1
 #endif //defined VOLT_BED_PIN || defined VOLT_PWR_PIN
 
-  if (_md->experimental_menu_visibility)
-  {
-    MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18
-  }
-
 
 #ifdef DEBUG_BUILD
   MENU_ITEM_SUBMENU_P(PSTR("Debug"), lcd_menu_debug);////c=18 r=1
@@ -5730,6 +5714,25 @@ static void sheets_menu()
 
 void lcd_hw_setup_menu(void)                      // can not be "static"
 {
+    typedef struct
+    {// 2bytes total
+        int8_t status;
+        uint8_t experimental_menu_visibility;
+    } _menu_data_t;
+    static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data");
+    _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]);
+
+    if (_md->status == 0 || lcd_draw_update)
+    {
+        _md->experimental_menu_visibility = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY);
+        if (_md->experimental_menu_visibility == EEPROM_EMPTY_VALUE)
+        {
+            _md->experimental_menu_visibility = 0;
+            eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, _md->experimental_menu_visibility);
+        }
+    }
+
+
     MENU_BEGIN();
     MENU_ITEM_BACK_P(_T(bSettings?MSG_SETTINGS:MSG_BACK)); // i.e. default menu-item / menu-item after checking mismatch
 
@@ -5743,6 +5746,12 @@ void lcd_hw_setup_menu(void)                      // can not be "static"
     //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu
     if(!mmu_enabled) MENU_ITEM_FUNCTION_P(PSTR("Fsensor Detection"), lcd_detect_IRsensor);
 #endif //IR_SENSOR_ANALOG
+
+    if (_md->experimental_menu_visibility)
+    {
+        MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18
+    }
+
     MENU_END();
 }