Move hardcoded values to variants

Firmware/tmc2130.cpp

@@ -24,7 +24,7 @@ uint8_t tmc2130_current_h[4] = TMC2130_CURRENTS_H;
 uint8_t tmc2130_current_r[4] = TMC2130_CURRENTS_R;
 
 //running currents for homing
-uint8_t tmc2130_current_r_home[4] = {8, 10, 20, 18};
+uint8_t tmc2130_current_r_home[4] = TMC2130_CURRENTS_R_HOME;
 
 
 //pwm_ampl
@@ -40,7 +40,7 @@ uint8_t tmc2130_mres[4] = {0, 0, 0, 0}; //will be filed at begin of init
 
 
 uint8_t tmc2130_sg_thr[4] = {TMC2130_SG_THRS_X, TMC2130_SG_THRS_Y, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E};
-uint8_t tmc2130_sg_thr_home[4] = {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E};
+uint8_t tmc2130_sg_thr_home[4] = TMC2130_SG_THRS_HOME;
 
 
 uint8_t tmc2130_sg_homing_axes_mask = 0x00;

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -260,11 +260,13 @@
 #define TMC2130_SG_THRS_Y       3     // stallguard sensitivity for Y axis
 #define TMC2130_SG_THRS_Z       4     // stallguard sensitivity for Z axis
 #define TMC2130_SG_THRS_E       3     // stallguard sensitivity for E axis
+#define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
 
 //new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
 #define TMC2130_CURRENTS_H {16, 20, 35, 30}  // default holding currents for all axes
 #define TMC2130_CURRENTS_R {16, 20, 35, 30}  // default running currents for all axes
-#define TMC2130_UNLOAD_CURRENT_R 12			 // lowe current for M600 to protect filament sensor 
+#define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18}  // homing running currents for all axes
+// #define TMC2130_UNLOAD_CURRENT_R 12			 // lower current for M600 to protect filament sensor - Unused
 
 #define TMC2130_STEALTH_Z
 

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -262,11 +262,13 @@
 #define TMC2130_SG_THRS_Y       3     // stallguard sensitivity for Y axis
 #define TMC2130_SG_THRS_Z       4     // stallguard sensitivity for Z axis
 #define TMC2130_SG_THRS_E       3     // stallguard sensitivity for E axis
+#define TMC2130_SG_THRS_HOME {3, 3, TMC2130_SG_THRS_Z, TMC2130_SG_THRS_E}
 
 //new settings is possible for vsense = 1, running current value > 31 set vsense to zero and shift both currents by 1 bit right (Z axis only)
 #define TMC2130_CURRENTS_H {16, 20, 35, 30}  // default holding currents for all axes
 #define TMC2130_CURRENTS_R {16, 20, 35, 30}  // default running currents for all axes
-#define TMC2130_UNLOAD_CURRENT_R 12			 // lowe current for M600 to protect filament sensor 
+#define TMC2130_CURRENTS_R_HOME {8, 10, 20, 18}  // homing running currents for all axes
+// #define TMC2130_UNLOAD_CURRENT_R 12			 // lower current for M600 to protect filament sensor - Unused
 
 #define TMC2130_STEALTH_Z