Check if translation isn't equal to origin

Removed identical translations/origin all lang files incl. po files,
which saves some xflash space

lang/lang-check.py

@@ -1,6 +1,6 @@
 #!/usr/bin/env python3
 #
-# Version 1.0.2 - Build 38
+# Version 1.0.2 - Build 43
 #############################################################################
 # Change log:
 #  7 May  2019, ondratu   , Initial
@@ -26,6 +26,7 @@
 #                             --information == output all source and translated messages
 #                             --import-check == used by `lang-import.sh`to verify
 #                                               newly import `lang_en_??.txt` files
+# 14 Mar. 2022, 3d-gussner, Check if translation isn't equal to origin
 #############################################################################
 #
 # Expected syntax of the files, which other scripts depend on
@@ -286,6 +287,11 @@ def parse_txt(lang, no_warning, warn_empty, information, import_check):
                             print_source_translation(source, translation,
                                                     wrapped_source, wrapped_translation,
                                                     rows, cols)
+                    if not no_warning and source == translation:
+                        print(yellow('[W]: Translation same as origin on line %d:' %lines))
+                        print_source_translation(source, translation,
+                                                wrapped_source, wrapped_translation,
+                                                rows, cols)
                     #elif information:
                     #    print(green('[I]: %s' % (message)))
                     #    print_source_translation(source, translation,

lang/lang-import.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 #
-# Version 1.0.1 Build 44
+# Version 1.0.1 Build 45
 #
 # lang-import.sh - multi-language support script
 #  for importing translated xx.po
@@ -281,9 +281,9 @@ if [ "$LNG" = "no" ]; then
  sed -i 's/\xc3\x86/\\xe1/g' $LNG'_filtered.po'
  #repace 'æ' with 'ae'
  sed -i 's/\xc3\xa6/\\xe1/g' $LNG'_filtered.po'
- #repace 'Ø' with 'O'
+ #repace 'Ø' with 'Ö'
  sed -i 's/\xc3\x98/\\xef/g' $LNG'_filtered.po'
- #repace 'ø' with 'o'
+ #repace 'ø' with 'ö'
  sed -i 's/\xc3\xb8/\\xef/g' $LNG'_filtered.po'
  #replace diacritics
  #repace 'Å' with 'A'

lang/lang_en_fr.txt

@@ -212,7 +212,7 @@
 
 #MSG_DATE c=17
 "Date:"
-"Date:"
+"\x00"
 
 #MSG_COMMUNITY_MADE c=18
 "Community made"

lang/lang_en_hu.txt

@@ -68,7 +68,7 @@
 
 #MSG_AUTO_HOME c=18
 "Auto home"
-"Auto home"
+"\x00"
 
 #MSG_AUTOLOAD_FILAMENT c=18
 "AutoLoad filament"
@@ -288,11 +288,11 @@
 
 #MSG_INFO_EXTRUDER c=18
 "Extruder info"
-"Extruder info"
+"\x00"
 
 #MSG_EXTRUDER c=17
 "Extruder"
-"Extruder"
+"\x00"
 
 #MSG_MMU_FAIL_STATS c=18
 "Fail stats MMU"
@@ -372,7 +372,7 @@
 
 #MSG_FLOW c=15
 "Flow"
-"Flow"
+"\x00"
 
 #MSG_SELFTEST_COOLING_FAN c=20
 "Front print fan?"
@@ -452,7 +452,7 @@
 
 #MSG_FILAMENT c=17
 "Filament"
-"Filament"
+"\x00"
 
 #MSG_WIZARD_XYZ_CAL c=20 r=8
 "I will run xyz calibration now. It will take approx. 12 mins."
@@ -604,7 +604,7 @@
 
 #MSG_NORMAL c=7
 "Normal"
-"Normal"
+"\x00"
 
 #MSG_SILENT c=7
 "Silent"
@@ -636,7 +636,7 @@
 
 #MSG_SELFTEST_MOTOR c=18
 "Motor"
-"Motor"
+"\x00"
 
 #MSG_MOVE_AXIS c=18
 "Move axis"
@@ -664,7 +664,7 @@
 
 #MSG_NA c=3
 "N/A"
-"N/A"
+"\x00"
 
 #MSG_NO c=4
 "No"
@@ -900,7 +900,7 @@
 
 #MSG_RPI_PORT c=13
 "RPi port"
-"RPi port"
+"\x00"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"

lang/lang_en_nl.txt

@@ -124,7 +124,7 @@
 
 #MSG_BED c=13
 "Bed"
-"Bed"
+"\x00"
 
 #MSG_BELT_STATUS c=18
 "Belt status"
@@ -312,11 +312,11 @@
 
 #MSG_SELFTEST_FAN c=20
 "Fan test"
-"Fan test"
+"\x00"
 
 #MSG_FANS_CHECK c=13
 "Fans check"
-"Fans check"
+"\x00"
 
 #MSG_FSENSOR c=12
 "Fil. sensor"
@@ -1160,7 +1160,7 @@
 
 #MSG_WIZARD c=17
 "Wizard"
-"Wizard"
+"\x00"
 
 #MSG_XYZ_DETAILS c=18
 "XYZ cal. details"

lang/lang_en_no.txt

@@ -196,7 +196,7 @@
 
 #MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
 "Select a filament for the First Layer Calibration and select it in the on-screen menu."
-"\x00"
+"Velg filamenttype for F\xefrstelags- kalibrering."
 
 #MSG_CRASH_DETECTED c=20
 "Crash detected."
@@ -900,7 +900,7 @@
 
 #MSG_RPI_PORT c=13
 "RPi port"
-"RPi port"
+"\x00"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
@@ -1060,11 +1060,11 @@
 
 #MSG_PINDA_CAL_FAILED c=20 r=4
 "PINDA calibration failed"
-"\x00"
+"PINDA kalibrering mislyktes"
 
 #MSG_PINDA_CALIBRATION_DONE c=20 r=8
 "PINDA calibration is finished and active. It can be disabled in menu Settings->PINDA cal."
-"\x00"
+"PINDA kalibrering er fullf\xefrt og aktiv. Der kan bli skudd av i menyen under Innstillinger -> PINDA kal."
 
 #MSG_FS_VERIFIED c=20 r=3
 "Sensor verified, remove the filament now."

lang/lang_en_pl.txt

@@ -604,7 +604,7 @@
 
 #MSG_NORMAL c=7
 "Normal"
-"Normal"
+"\x00"
 
 #MSG_SILENT c=7
 "Silent"

lang/lang_en_sk.txt

@@ -604,7 +604,7 @@
 
 #MSG_NORMAL c=7
 "Normal"
-"Normal"
+"\x00"
 
 #MSG_SILENT c=7
 "Silent"

lang/lang_en_sv.txt

@@ -56,7 +56,7 @@
 
 #MSG_AUTO c=6
 "Auto"
-"Auto"
+"\x00"
 
 #MSG_PRESS c=20 r=2
 "and press the knob"
@@ -276,7 +276,7 @@
 
 #MSG_DIM c=6
 "Dim"
-"Dim"
+"\x00"
 
 #MSG_ERROR c=10
 "ERROR:"
@@ -288,11 +288,11 @@
 
 #MSG_INFO_EXTRUDER c=18
 "Extruder info"
-"Extruder info"
+"\x00"
 
 #MSG_EXTRUDER c=17
 "Extruder"
-"Extruder"
+"\x00"
 
 #MSG_MMU_FAIL_STATS c=18
 "Fail stats MMU"
@@ -320,7 +320,7 @@
 
 #MSG_FSENSOR c=12
 "Fil. sensor"
-"Fil. sensor"
+"\x00"
 
 #MSG_FIL_RUNOUTS c=15
 "Fil. runouts"
@@ -336,7 +336,7 @@
 
 #MSG_SELFTEST_FILAMENT_SENSOR c=17
 "Filament sensor"
-"Filament sensor"
+"\x00"
 
 #MSG_FILAMENT_USED c=19
 "Filament used"
@@ -532,7 +532,7 @@
 
 #MSG_ITERATION c=12
 "Iteration"
-"Iteration"
+"\x00"
 
 #MSG_LOOSE_PULLEY c=20
 "Loose pulley"
@@ -604,7 +604,7 @@
 
 #MSG_NORMAL c=7
 "Normal"
-"Normal"
+"\x00"
 
 #MSG_SILENT c=7
 "Silent"
@@ -636,7 +636,7 @@
 
 #MSG_SELFTEST_MOTOR c=18
 "Motor"
-"Motor"
+"\x00"
 
 #MSG_MOVE_AXIS c=18
 "Move axis"
@@ -664,7 +664,7 @@
 
 #MSG_NA c=3
 "N/A"
-"N/A"
+"\x00"
 
 #MSG_NO c=4
 "No"
@@ -900,7 +900,7 @@
 
 #MSG_RPI_PORT c=13
 "RPi port"
-"RPi port"
+"\x00"
 
 #MSG_WIZARD_RERUN c=20 r=7
 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
@@ -1040,7 +1040,7 @@
 
 #MSG_SUPPORT c=18
 "Support"
-"Support"
+"\x00"
 
 #MSG_SELFTEST_SWAPPED c=16
 "Swapped"
@@ -1116,7 +1116,7 @@
 
 #MSG_TOTAL c=6
 "Total"
-"Total"
+"\x00"
 
 #MSG_MENU_VOLTAGES c=15
 "Voltages"
@@ -1188,7 +1188,7 @@
 
 #MSG_TIMEOUT c=12
 "Timeout"
-"Timeout"
+"\x00"
 
 #MSG_X_CORRECTION c=13
 "X-correct:"
@@ -1360,7 +1360,7 @@
 
 #MSG_SOUND_BLIND c=7
 "Assist"
-"Assist"
+"\x00"
 
 #MSG_STEEL_SHEET c=18
 "Steel sheets"

lang/po/Firmware_fr.po

@@ -283,7 +283,7 @@ msgstr ""
 # MSG_DATE c=17
 #: ultralcd.cpp:1975
 msgid "Date:"
-msgstr "Date:"
+msgstr ""
 
 # MSG_COMMUNITY_MADE c=18
 #: messages.c:25

lang/po/Firmware_hu.po

@@ -103,7 +103,7 @@ msgstr "A Z tengely a felso vegponton van?"
 # MSG_AUTO_HOME c=18
 #: messages.c:11
 msgid "Auto home"
-msgstr "Auto home"
+msgstr ""
 
 # MSG_AUTOLOAD_FILAMENT c=18
 #: ultralcd.cpp:6635
@@ -378,12 +378,12 @@ msgstr "Extruder vent.:"
 # MSG_INFO_EXTRUDER c=18
 #: ultralcd.cpp:2030
 msgid "Extruder info"
-msgstr "Extruder info"
+msgstr """
 
 # MSG_EXTRUDER c=17
 #: messages.c:32
 msgid "Extruder"
-msgstr "Extruder"
+msgstr ""
 
 # MSG_MMU_FAIL_STATS c=18
 #: ultralcd.cpp:6657
@@ -483,7 +483,7 @@ msgstr "Hozd helyre a hibat, majd nyomd meg a gombot az MMU egysegen."
 # MSG_FLOW c=15
 #: ultralcd.cpp:6791
 msgid "Flow"
-msgstr "Flow"
+msgstr ""
 
 # MSG_SELFTEST_COOLING_FAN c=20
 #: messages.c:90
@@ -583,7 +583,7 @@ msgstr "Extruder valasztas:"
 # MSG_FILAMENT c=17
 #: messages.c:35
 msgid "Filament"
-msgstr "Filament"
+msgstr ""
 
 # MSG_WIZARD_XYZ_CAL c=20 r=8
 #: ultralcd.cpp:4933
@@ -773,7 +773,7 @@ msgstr "MK3 firmver telepitve MK3S nyomtatora"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108
@@ -813,7 +813,7 @@ msgstr "MMU2 csatlakozott"
 # MSG_SELFTEST_MOTOR c=18
 #: messages.c:98
 msgid "Motor"
-msgstr "Motor"
+msgstr ""
 
 # MSG_MOVE_AXIS c=18
 #: ultralcd.cpp:5659
@@ -848,7 +848,7 @@ msgstr "Nincs SD kartya"
 # MSG_NA c=3
 #: messages.c:129
 msgid "N/A"
-msgstr "N/A"
+msgstr ""
 
 # MSG_NO c=4
 #: messages.c:73
@@ -1143,7 +1143,7 @@ msgstr "Jobb old.[μm]"
 # MSG_RPI_PORT c=13
 #: messages.c:144
 msgid "RPi port"
-msgstr "RPi port"
+msgstr ""
 
 # MSG_WIZARD_RERUN c=20 r=7
 #: ultralcd.cpp:4738

lang/po/Firmware_nl.po

@@ -173,7 +173,7 @@ msgstr "Helderheid"
 # MSG_BED c=13
 #: messages.c:14
 msgid "Bed"
-msgstr "Bed"
+msgstr ""
 
 # MSG_BELT_STATUS c=18
 #: messages.c:19
@@ -408,12 +408,12 @@ msgstr "Fan snelh."
 # MSG_SELFTEST_FAN c=20
 #: messages.c:93
 msgid "Fan test"
-msgstr "Fan test"
+msgstr ""
 
 # MSG_FANS_CHECK c=13
 #: messages.c:33
 msgid "Fans check"
-msgstr "Fans check"
+msgstr ""
 
 # MSG_FSENSOR c=12
 #: messages.c:51
@@ -1468,7 +1468,7 @@ msgstr "Aansluitingsfout"
 # MSG_WIZARD c=17
 #: ultralcd.cpp:5753
 msgid "Wizard"
-msgstr "Wizard"
+msgstr ""
 
 # MSG_XYZ_DETAILS c=18
 #: ultralcd.cpp:2029

lang/po/Firmware_no.po

@@ -263,7 +263,7 @@ msgstr "Krasjdet."
 # MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
 #: ultralcd.cpp:4824
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
-msgstr ""
+msgstr "Velg filamenttype for Førstelags- kalibrering."
 
 # MSG_CRASH_DETECTED c=20
 #: messages.c:29
@@ -1143,7 +1143,7 @@ msgstr "Høyre side[μm]"
 # MSG_RPI_PORT c=13
 #: messages.c:144
 msgid "RPi port"
-msgstr "RPi port"
+msgstr ""
 
 # MSG_WIZARD_RERUN c=20 r=7
 #: ultralcd.cpp:4738
@@ -1343,12 +1343,12 @@ msgstr "Velg temperaturen som passer ditt materiale."
 # MSG_PINDA_CAL_FAILED c=20 r=4
 #: ultralcd.cpp:3761
 msgid "PINDA calibration failed"
-msgstr ""
+msgstr "PINDA kalibrering mislyktes"
 
 # MSG_PINDA_CALIBRATION_DONE c=20 r=8
 #: messages.c:115
 msgid "PINDA calibration is finished and active. It can be disabled in menu Settings->PINDA cal."
-msgstr ""
+msgstr "PINDA kalibrering er fullført og aktiv. Der kan bli skudd av i menyen under Innstillinger -> PINDA kal."
 
 # MSG_FS_VERIFIED c=20 r=3
 #: ultralcd.cpp:7314

lang/po/Firmware_pl.po

@@ -773,7 +773,7 @@ msgstr "Wykryto firmware MK3 w drukarce MK3S"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108

lang/po/Firmware_sk.po

@@ -773,7 +773,7 @@ msgstr "MK3 firmware na MK3S tlaciarni"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108

lang/po/Firmware_sv.po

@@ -88,7 +88,7 @@ msgstr "Omgivande"
 # MSG_AUTO c=6
 #: messages.c:162
 msgid "Auto"
-msgstr "Auto"
+msgstr ""
 
 # MSG_PRESS c=20 r=2
 #: ultralcd.cpp:2475
@@ -363,7 +363,7 @@ msgstr "FEL: Filamentsensorn svarar inte, kontrollera anslutningen."
 # MSG_DIM c=6
 #: messages.c:161
 msgid "Dim"
-msgstr "Dim"
+msgstr ""
 
 # MSG_ERROR c=10
 #: messages.c:31
@@ -378,12 +378,12 @@ msgstr "Extruderfläkt:"
 # MSG_INFO_EXTRUDER c=18
 #: ultralcd.cpp:2030
 msgid "Extruder info"
-msgstr "Extruder info"
+msgstr ""
 
 # MSG_EXTRUDER c=17
 #: messages.c:32
 msgid "Extruder"
-msgstr "Extruder"
+msgstr ""
 
 # MSG_MMU_FAIL_STATS c=18
 #: ultralcd.cpp:6657
@@ -418,7 +418,7 @@ msgstr "Fläktcheck"
 # MSG_FSENSOR c=12
 #: messages.c:51
 msgid "Fil. sensor"
-msgstr "Fil. sensor"
+msgstr ""
 
 # MSG_FIL_RUNOUTS c=15
 #: messages.c:34
@@ -438,7 +438,7 @@ msgstr "Filament ej laddat"
 # MSG_SELFTEST_FILAMENT_SENSOR c=17
 #: messages.c:99
 msgid "Filament sensor"
-msgstr "Filament sensor"
+msgstr ""
 
 # MSG_FILAMENT_USED c=19
 #: ultralcd.cpp:2703
@@ -683,7 +683,7 @@ msgstr "Laddar filament"
 # MSG_ITERATION c=12
 #: messages.c:55
 msgid "Iteration"
-msgstr "Iteration"
+msgstr ""
 
 # MSG_LOOSE_PULLEY c=20
 #: ultralcd.cpp:8070
@@ -773,7 +773,7 @@ msgstr "MK3-firmware upptäckt pa MK3S-skrivare"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108
@@ -813,7 +813,7 @@ msgstr "MMU2 ansluten"
 # MSG_SELFTEST_MOTOR c=18
 #: messages.c:98
 msgid "Motor"
-msgstr "Motor"
+msgstr ""
 
 # MSG_MOVE_AXIS c=18
 #: ultralcd.cpp:5659
@@ -848,7 +848,7 @@ msgstr "Inget SD-kort"
 # MSG_NA c=3
 #: messages.c:129
 msgid "N/A"
-msgstr "N/A"
+msgstr ""
 
 # MSG_NO c=4
 #: messages.c:73
@@ -1143,7 +1143,7 @@ msgstr "Höger sida[μm]"
 # MSG_RPI_PORT c=13
 #: messages.c:144
 msgid "RPi port"
-msgstr "RPi port"
+msgstr ""
 
 # MSG_WIZARD_RERUN c=20 r=7
 #: ultralcd.cpp:4738
@@ -1318,7 +1318,7 @@ msgstr "STOPPAD."
 # MSG_SUPPORT c=18
 #: ultralcd.cpp:6659
 msgid "Support"
-msgstr "Support"
+msgstr ""
 
 # MSG_SELFTEST_SWAPPED c=16
 #: ultralcd.cpp:8083
@@ -1413,7 +1413,7 @@ msgstr "Tar bort filament"
 # MSG_TOTAL c=6
 #: messages.c:102
 msgid "Total"
-msgstr "Total"
+msgstr ""
 
 # MSG_MENU_VOLTAGES c=15
 #: ultralcd.cpp:2040
@@ -1503,7 +1503,7 @@ msgstr "XYZ-kalibrering ok. X/Y-axlarna är mycket lite skeva. Bra jobbat!"
 # MSG_TIMEOUT c=12
 #: messages.c:159
 msgid "Timeout"
-msgstr "Timeout"
+msgstr ""
 
 # MSG_X_CORRECTION c=13
 #: ultralcd.cpp:5068
@@ -1718,7 +1718,7 @@ msgstr "Skiva"
 # MSG_SOUND_BLIND c=7
 #: messages.c:148
 msgid "Assist"
-msgstr "Assist"
+msgstr ""
 
 # MSG_STEEL_SHEET c=18
 #: messages.c:68

lang/po/new/fr.po

@@ -283,7 +283,7 @@ msgstr ""
 # MSG_DATE c=17
 #: ultralcd.cpp:1975
 msgid "Date:"
-msgstr "Date:"
+msgstr ""
 
 # MSG_COMMUNITY_MADE c=18
 #: messages.c:25

lang/po/new/hu.po

@@ -103,7 +103,7 @@ msgstr "A Z tengely a felso vegponton van?"
 # MSG_AUTO_HOME c=18
 #: messages.c:11
 msgid "Auto home"
-msgstr "Auto home"
+msgstr ""
 
 # MSG_AUTOLOAD_FILAMENT c=18
 #: ultralcd.cpp:6635
@@ -378,12 +378,12 @@ msgstr "Extruder vent.:"
 # MSG_INFO_EXTRUDER c=18
 #: ultralcd.cpp:2030
 msgid "Extruder info"
-msgstr "Extruder info"
+msgstr """
 
 # MSG_EXTRUDER c=17
 #: messages.c:32
 msgid "Extruder"
-msgstr "Extruder"
+msgstr ""
 
 # MSG_MMU_FAIL_STATS c=18
 #: ultralcd.cpp:6657
@@ -483,7 +483,7 @@ msgstr "Hozd helyre a hibat, majd nyomd meg a gombot az MMU egysegen."
 # MSG_FLOW c=15
 #: ultralcd.cpp:6791
 msgid "Flow"
-msgstr "Flow"
+msgstr ""
 
 # MSG_SELFTEST_COOLING_FAN c=20
 #: messages.c:90
@@ -583,7 +583,7 @@ msgstr "Extruder valasztas:"
 # MSG_FILAMENT c=17
 #: messages.c:35
 msgid "Filament"
-msgstr "Filament"
+msgstr ""
 
 # MSG_WIZARD_XYZ_CAL c=20 r=8
 #: ultralcd.cpp:4933
@@ -773,7 +773,7 @@ msgstr "MK3 firmver telepitve MK3S nyomtatora"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108
@@ -813,7 +813,7 @@ msgstr "MMU2 csatlakozott"
 # MSG_SELFTEST_MOTOR c=18
 #: messages.c:98
 msgid "Motor"
-msgstr "Motor"
+msgstr ""
 
 # MSG_MOVE_AXIS c=18
 #: ultralcd.cpp:5659
@@ -848,7 +848,7 @@ msgstr "Nincs SD kartya"
 # MSG_NA c=3
 #: messages.c:129
 msgid "N/A"
-msgstr "N/A"
+msgstr ""
 
 # MSG_NO c=4
 #: messages.c:73
@@ -1143,7 +1143,7 @@ msgstr "Jobb old.[μm]"
 # MSG_RPI_PORT c=13
 #: messages.c:144
 msgid "RPi port"
-msgstr "RPi port"
+msgstr ""
 
 # MSG_WIZARD_RERUN c=20 r=7
 #: ultralcd.cpp:4738

lang/po/new/nl.po

@@ -173,7 +173,7 @@ msgstr "Helderheid"
 # MSG_BED c=13
 #: messages.c:14
 msgid "Bed"
-msgstr "Bed"
+msgstr ""
 
 # MSG_BELT_STATUS c=18
 #: messages.c:19
@@ -408,12 +408,12 @@ msgstr "Fan snelh."
 # MSG_SELFTEST_FAN c=20
 #: messages.c:93
 msgid "Fan test"
-msgstr "Fan test"
+msgstr ""
 
 # MSG_FANS_CHECK c=13
 #: messages.c:33
 msgid "Fans check"
-msgstr "Fans check"
+msgstr ""
 
 # MSG_FSENSOR c=12
 #: messages.c:51
@@ -1468,7 +1468,7 @@ msgstr "Aansluitingsfout"
 # MSG_WIZARD c=17
 #: ultralcd.cpp:5753
 msgid "Wizard"
-msgstr "Wizard"
+msgstr ""
 
 # MSG_XYZ_DETAILS c=18
 #: ultralcd.cpp:2029

lang/po/new/no.po

@@ -263,7 +263,7 @@ msgstr "Krasjdet."
 # MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
 #: ultralcd.cpp:4824
 msgid "Select a filament for the First Layer Calibration and select it in the on-screen menu."
-msgstr ""
+msgstr "Velg filamenttype for Førstelags- kalibrering.
 
 # MSG_CRASH_DETECTED c=20
 #: messages.c:29
@@ -1143,7 +1143,7 @@ msgstr "Høyre side[μm]"
 # MSG_RPI_PORT c=13
 #: messages.c:144
 msgid "RPi port"
-msgstr "RPi port"
+msgstr ""
 
 # MSG_WIZARD_RERUN c=20 r=7
 #: ultralcd.cpp:4738
@@ -1343,12 +1343,12 @@ msgstr "Velg temperaturen som passer ditt materiale."
 # MSG_PINDA_CAL_FAILED c=20 r=4
 #: ultralcd.cpp:3761
 msgid "PINDA calibration failed"
-msgstr ""
+msgstr "PINDA kalibrering mislyktes"
 
 # MSG_PINDA_CALIBRATION_DONE c=20 r=8
 #: messages.c:115
 msgid "PINDA calibration is finished and active. It can be disabled in menu Settings->PINDA cal."
-msgstr ""
+msgstr "PINDA kalibrering er fullført og aktiv. Der kan bli skudd av i menyen under Innstillinger -> PINDA kal."
 
 # MSG_FS_VERIFIED c=20 r=3
 #: ultralcd.cpp:7314

lang/po/new/pl.po

@@ -773,7 +773,7 @@ msgstr "Wykryto firmware MK3 w drukarce MK3S"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108

lang/po/new/sk.po

@@ -773,7 +773,7 @@ msgstr "MK3 firmware na MK3S tlaciarni"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108

lang/po/new/sv.po

@@ -88,7 +88,7 @@ msgstr "Omgivande"
 # MSG_AUTO c=6
 #: messages.c:162
 msgid "Auto"
-msgstr "Auto"
+msgstr ""
 
 # MSG_PRESS c=20 r=2
 #: ultralcd.cpp:2475
@@ -363,7 +363,7 @@ msgstr "FEL: Filamentsensorn svarar inte, kontrollera anslutningen."
 # MSG_DIM c=6
 #: messages.c:161
 msgid "Dim"
-msgstr "Dim"
+msgstr ""
 
 # MSG_ERROR c=10
 #: messages.c:31
@@ -378,12 +378,12 @@ msgstr "Extruderfläkt:"
 # MSG_INFO_EXTRUDER c=18
 #: ultralcd.cpp:2030
 msgid "Extruder info"
-msgstr "Extruder info"
+msgstr ""
 
 # MSG_EXTRUDER c=17
 #: messages.c:32
 msgid "Extruder"
-msgstr "Extruder"
+msgstr ""
 
 # MSG_MMU_FAIL_STATS c=18
 #: ultralcd.cpp:6657
@@ -418,7 +418,7 @@ msgstr "Fläktcheck"
 # MSG_FSENSOR c=12
 #: messages.c:51
 msgid "Fil. sensor"
-msgstr "Fil. sensor"
+msgstr ""
 
 # MSG_FIL_RUNOUTS c=15
 #: messages.c:34
@@ -438,7 +438,7 @@ msgstr "Filament ej laddat"
 # MSG_SELFTEST_FILAMENT_SENSOR c=17
 #: messages.c:99
 msgid "Filament sensor"
-msgstr "Filament sensor"
+msgstr ""
 
 # MSG_FILAMENT_USED c=19
 #: ultralcd.cpp:2703
@@ -683,7 +683,7 @@ msgstr "Laddar filament"
 # MSG_ITERATION c=12
 #: messages.c:55
 msgid "Iteration"
-msgstr "Iteration"
+msgstr ""
 
 # MSG_LOOSE_PULLEY c=20
 #: ultralcd.cpp:8070
@@ -773,7 +773,7 @@ msgstr "MK3-firmware upptäckt pa MK3S-skrivare"
 # MSG_NORMAL c=7
 #: messages.c:109
 msgid "Normal"
-msgstr "Normal"
+msgstr ""
 
 # MSG_SILENT c=7
 #: messages.c:108
@@ -813,7 +813,7 @@ msgstr "MMU2 ansluten"
 # MSG_SELFTEST_MOTOR c=18
 #: messages.c:98
 msgid "Motor"
-msgstr "Motor"
+msgstr ""
 
 # MSG_MOVE_AXIS c=18
 #: ultralcd.cpp:5659
@@ -848,7 +848,7 @@ msgstr "Inget SD-kort"
 # MSG_NA c=3
 #: messages.c:129
 msgid "N/A"
-msgstr "N/A"
+msgstr ""
 
 # MSG_NO c=4
 #: messages.c:73
@@ -1143,7 +1143,7 @@ msgstr "Höger sida[μm]"
 # MSG_RPI_PORT c=13
 #: messages.c:144
 msgid "RPi port"
-msgstr "RPi port"
+msgstr ""
 
 # MSG_WIZARD_RERUN c=20 r=7
 #: ultralcd.cpp:4738
@@ -1318,7 +1318,7 @@ msgstr "STOPPAD."
 # MSG_SUPPORT c=18
 #: ultralcd.cpp:6659
 msgid "Support"
-msgstr "Support"
+msgstr ""
 
 # MSG_SELFTEST_SWAPPED c=16
 #: ultralcd.cpp:8083
@@ -1413,7 +1413,7 @@ msgstr "Tar bort filament"
 # MSG_TOTAL c=6
 #: messages.c:102
 msgid "Total"
-msgstr "Total"
+msgstr ""
 
 # MSG_MENU_VOLTAGES c=15
 #: ultralcd.cpp:2040
@@ -1503,7 +1503,7 @@ msgstr "XYZ-kalibrering ok. X/Y-axlarna är mycket lite skeva. Bra jobbat!"
 # MSG_TIMEOUT c=12
 #: messages.c:159
 msgid "Timeout"
-msgstr "Timeout"
+msgstr ""
 
 # MSG_X_CORRECTION c=13
 #: ultralcd.cpp:5068
@@ -1718,7 +1718,7 @@ msgstr "Skiva"
 # MSG_SOUND_BLIND c=7
 #: messages.c:148
 msgid "Assist"
-msgstr "Assist"
+msgstr ""
 
 # MSG_STEEL_SHEET c=18
 #: messages.c:68