Bump up Revision to ALPHA1 6051

Temporary fix for MSG_BTN_MORE
pre-release pot and po update

Firmware/Configuration.h

@@ -19,15 +19,15 @@ extern PGM_P sPrinterName;
 #define FW_MAJOR 3
 #define FW_MINOR 13
 #define FW_REVISION 0
-//#define FW_FLAVOR RC      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
-//#define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed.
+#define FW_FLAVOR ALPHA      //uncomment if DEBUG, DEVEL, ALPHA, BETA or RC
+#define FW_FLAVERSION 1     //uncomment if FW_FLAVOR is defined and versioning is needed.
 #ifndef FW_FLAVOR
     #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION)
 #else
     #define FW_VERSION STR(FW_MAJOR) "." STR(FW_MINOR) "." STR(FW_REVISION) "-" STR(FW_FLAVOR) "" STR(FW_FLAVERSION)
 #endif
 
-#define FW_COMMIT_NR 4987
+#define FW_COMMIT_NR 6051
 
 // FW_VERSION_UNKNOWN means this is an unofficial build.
 // The firmware should only be checked into github with this symbol.

Firmware/mmu2/errors_list.h

@@ -298,7 +298,7 @@ static const char MSG_BTN_RESTART_MMU[] PROGMEM_I1 = ISTR("Reset MMU"); ////MSG_
 static const char MSG_BTN_UNLOAD[] PROGMEM_I1 = ISTR("Unload"); ////MSG_BTN_UNLOAD c=8
 static const char MSG_BTN_STOP[] PROGMEM_I1 = ISTR("Stop"); ////MSG_BTN_STOP c=8
 static const char MSG_BTN_DISABLE_MMU[] PROGMEM_I1 = ISTR("Disable"); ////MSG_BTN_DISABLE_MMU c=9
-static const char MSG_BTN_MORE[] PROGMEM_N1 = "\x06"; ////MSG_BTN_MORE c=8
+static const char MSG_BTN_MORE[] PROGMEM_I1 = ISTR("\x06"); ////MSG_BTN_MORE c=8 //@todo convert to PROGMEM_N1
 
 // Used to parse the buttons from Btns().
 static const char * const btnOperation[] PROGMEM = {

Firmware/mmu2_error_converter.cpp

@@ -164,7 +164,7 @@ const char * PrusaErrorButtonTitle(uint8_t bi){
 }
 
 const char * PrusaErrorButtonMore(){
-    return (MSG_BTN_MORE);
+    return _R(MSG_BTN_MORE);//@todo convert to PROGMEM_N1
 }
 
 struct ResetOnExit {

Firmware/mmu2_reporting.cpp

@@ -76,6 +76,7 @@ static void ReportErrorHookStaticRender(uint8_t ei) {
     ReportErrorHookSensorLineRender();
 
     // Render the choices
+    //@todo convert MSG_BTN_MORE to PROGMEM_N1
     lcd_show_choices_prompt_P(two_choices ? LCD_LEFT_BUTTON_CHOICE : LCD_MIDDLE_BUTTON_CHOICE, _T(PrusaErrorButtonTitle(button_op_middle)), _T(two_choices ? PrusaErrorButtonMore() : PrusaErrorButtonTitle(button_op_right)), two_choices ? 18 : 9, two_choices ? nullptr : _T(PrusaErrorButtonMore()));
 }
 

Firmware/ultralcd.cpp

@@ -3313,8 +3313,8 @@ void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, ui
             // The right and maybe the center point out of reach.
             msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
         else
-            // The left and maybe the center point out of reach.
-            msg = _i("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
+            // The left and maybe the center point out of reach. //@todo Why isn't it found in the firmware.map
+            msg = _n("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
         lcd_show_fullscreen_message_and_wait_P(msg);
     } else {
         if (point_too_far_mask != 0) {
@@ -3325,8 +3325,8 @@ void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, ui
                 // The right and maybe the center point out of reach.
                 msg = _i("XYZ calibration compromised. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
             else
-                // The left and maybe the center point out of reach.
-                msg = _i("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
+                // The left and maybe the center point out of reach. //@todo Why isn't it found in the firmware.map
+                msg = _n("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
             lcd_show_fullscreen_message_and_wait_P(msg);
         }
         if (point_too_far_mask == 0 || result > 0) {

lang/po/Firmware.pot

@@ -7,94 +7,94 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr ""
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ""
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr ""
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr ""
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr ""
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr ""
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr ""
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -106,50 +106,50 @@ msgid "Avoiding grind"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr ""
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr ""
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -159,210 +159,210 @@ msgid ""
 msgstr ""
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr ""
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr ""
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr ""
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr ""
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr ""
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid ""
 "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr ""
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr ""
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr ""
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr ""
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr ""
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr ""
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr ""
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr ""
 
@@ -372,7 +372,7 @@ msgid "Crash detected."
 msgstr ""
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -380,34 +380,34 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr ""
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr ""
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr ""
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr ""
 
@@ -419,7 +419,7 @@ msgid "Disengaging idler"
 msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet."
@@ -428,19 +428,19 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
 msgstr ""
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr ""
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr ""
 
@@ -469,13 +469,13 @@ msgid "ERR Wait for User"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr ""
 
@@ -487,17 +487,17 @@ msgid "Ejecting filament"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr ""
 
@@ -509,121 +509,121 @@ msgid "Engaging idler"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr ""
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr ""
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr ""
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr ""
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr ""
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr ""
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr ""
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr ""
 
@@ -652,110 +652,110 @@ msgid "Feeding to nozzle"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr ""
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
 msgstr ""
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr ""
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41
 #: ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr ""
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr ""
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr ""
 
@@ -798,42 +798,42 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr ""
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr ""
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -841,16 +841,16 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
 msgstr ""
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr ""
 
@@ -861,38 +861,38 @@ msgid "Homing"
 msgstr ""
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr ""
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr ""
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -904,43 +904,43 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr ""
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr ""
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr ""
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr ""
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware."
 " If the issue persists, contact support."
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
@@ -950,261 +950,262 @@ msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr ""
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr ""
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr ""
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr ""
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr ""
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr ""
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr ""
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr ""
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr ""
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr ""
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#. MSG_TITLE_SELFTEST_FAILED c=20
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
 msgid "MMU SELFTEST FAILED"
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr ""
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
 msgstr ""
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr ""
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr ""
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr ""
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr ""
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr ""
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr ""
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr ""
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr ""
 
@@ -1216,10 +1217,10 @@ msgstr ""
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr ""
 
@@ -1229,75 +1230,75 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr ""
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr ""
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr ""
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr ""
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr ""
 
@@ -1309,88 +1310,88 @@ msgstr ""
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr ""
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr ""
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr ""
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr ""
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr ""
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr ""
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr ""
 
@@ -1401,13 +1402,13 @@ msgid "Parking selector"
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr ""
 
@@ -1418,97 +1419,97 @@ msgid "Performing cut"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
 msgstr ""
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr ""
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
 msgstr ""
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr ""
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr ""
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr ""
 
@@ -1518,51 +1519,51 @@ msgid "Please upgrade."
 msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr ""
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr ""
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr ""
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr ""
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr ""
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr ""
 
@@ -1573,48 +1574,48 @@ msgid "Preparing blade"
 msgstr ""
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr ""
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr ""
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr ""
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr ""
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First"
 " steps, section Calibration flow."
@@ -1633,7 +1634,7 @@ msgid ""
 msgstr ""
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 
@@ -1644,66 +1645,66 @@ msgid "Pushing filament"
 msgstr ""
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr ""
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr ""
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr ""
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr ""
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr ""
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr ""
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr ""
 
@@ -1714,7 +1715,7 @@ msgid "Retract from FINDA"
 msgstr ""
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr ""
 
@@ -1725,87 +1726,86 @@ msgid "Returning selector"
 msgstr ""
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr ""
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr ""
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr ""
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr ""
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr ""
 
@@ -1816,61 +1816,61 @@ msgid "Selecting fil. slot"
 msgstr ""
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr ""
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr ""
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr ""
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr ""
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr ""
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr ""
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr ""
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr ""
 
@@ -1881,7 +1881,7 @@ msgid "Sheet"
 msgstr ""
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1890,18 +1890,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr ""
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr ""
 
@@ -1913,13 +1913,13 @@ msgid ""
 msgstr ""
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr ""
 
@@ -1930,70 +1930,70 @@ msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr ""
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr ""
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr ""
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr ""
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr ""
 
@@ -2002,82 +2002,72 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr ""
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr ""
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr ""
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr ""
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr ""
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr ""
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr ""
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2085,76 +2075,76 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr ""
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr ""
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr ""
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr ""
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr ""
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector"
 " is free. Check FINDA connection."
 msgstr ""
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr ""
 
@@ -2171,23 +2161,23 @@ msgid "Unloading to pulley"
 msgstr ""
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr ""
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr ""
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr ""
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2196,196 +2186,192 @@ msgid ""
 msgstr ""
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr ""
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr ""
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr ""
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr ""
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr ""
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr ""
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr ""
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr ""
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr ""
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr ""
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr ""
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr ""
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr ""
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr ""
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr ""
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr ""
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr ""
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_cs.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 nebo starsi"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 nebo novejsi"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s ocekavana verze"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Zrusit"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Doladeni Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Vse OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Vse je hotovo. Tisku zdar!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Abeceda"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Vzdy"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Okoli"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Dojely oba Z voziky k~hornimu dorazu?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto home"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Automat."
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "AutoZavedeni fil."
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -117,50 +117,50 @@ msgid "Avoiding grind"
 msgstr "Eliminace obrouseni"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Osa"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Delka osy"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Zpet"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Podlozka"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Zahrivani bedu"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Bed OK."
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Korekce podlozky"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -171,55 +171,55 @@ msgstr ""
 "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Podlozka/Topeni"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Stav remenu"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test remenu"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Detekovan vypadek proudu.Obnovit tisk?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Jasny"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Podsviceni"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "CHYBA KOMUNIKACE"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibrace XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibrovat Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -228,13 +228,13 @@ msgstr ""
 "tlacitkem."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibruji Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -243,141 +243,141 @@ msgstr ""
 "tlacitkem."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibruji vychozi p."
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibrace"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibrace OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Chyba pohybu selektoru nebo idleru"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr "Nelze provest akci, filament je zaveden. Nejprve jej vyjmete."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Karta vyjmuta"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Vymente SD kartu"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Vymenit filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Zmena uspesna!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Vymena ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Kontrola osy X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Kontrola osy Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Kontrola osy Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Kontrola podlozky"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Kontrola endstopu"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Kontroluji soubor"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Kontrola hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Kontrola senzoru"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Kontrola"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Barva neni cista"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Komunitni prekl."
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Pokr."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Zchladit"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Kopirovat vybrany jazyk?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Naraz"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Det. narazu"
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Detekovan naraz."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -398,34 +398,34 @@ msgstr ""
 "Normal modu"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Ustrihnout"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Strihani"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Temny"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Vypnout"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Vypnout motory"
 
@@ -437,7 +437,7 @@ msgid "Disengaging idler"
 msgstr "Odpojuji idler"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -448,7 +448,7 @@ msgstr ""
 "podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -456,12 +456,12 @@ msgstr ""
 "Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a podlozkou?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Konec"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "Korekce E:"
 
@@ -490,13 +490,13 @@ msgid "ERR Wait for User"
 msgstr "ERR: Cekam na uziv."
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "CHYBA:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Vysunout fil."
 
@@ -508,17 +508,17 @@ msgid "Ejecting filament"
 msgstr "Vysouvam filament"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Koncovy spinac"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Kon. spinac nesepnut"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Konc. spinace"
 
@@ -530,47 +530,47 @@ msgid "Engaging idler"
 msgstr "Zapinani idleru"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Extruder - info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autozav."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "Det. zaseku"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "F. runout"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT JE ZAVEDEN"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NESEPNULA"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -579,7 +579,7 @@ msgstr ""
 "ze se filament nezasekl a FINDA funguje."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -588,67 +588,67 @@ msgstr ""
 "senzor ok?"
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: ZASEK. FILAM."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS reakce"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "F. SENZOR NESEPNUL"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "F.SENZOR MOC BRZY"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENZOR ZASEK FILAM."
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME CHYBA"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Selhani"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Selhani MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falesne spusteni"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Rychlost vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test ventilatoru"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Kontr. vent."
 
@@ -677,45 +677,45 @@ msgid "Feeding to nozzle"
 msgstr "Zavadim do trysky"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Vypadky filam."
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. senzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament vytlacen a spravne barvy?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Filament nezaveden"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Senzor filamentu"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -724,7 +724,7 @@ msgstr ""
 "filament muze pohybovat a senzor funguje."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -733,7 +733,7 @@ msgstr ""
 "filament dostal a ze senzor funguje."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -742,52 +742,52 @@ msgstr ""
 "nejsou necistoty. Ujistete se, ze senzor funguje spravne."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Spotrebovano filam."
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Soubor nekompletni. Pokracovat?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Dokoncovani pohybu"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Kal. prvni vrstvy"
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri "
 "sestaveni tiskarny."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Prutok"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Predni tiskovy vent?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Vpredu [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Predni/levy vent."
 
@@ -836,42 +836,42 @@ msgstr ""
 "zrusen."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW nastaveni"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Topeni/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Zahrivani"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Zahrivani preruseno bezpecnostnim casovacem."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Zahrivani OK."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -881,7 +881,7 @@ msgstr ""
 "nastaveni, ve kterem zkalibrujeme osu Z. Pak budete moct zacit tisknout."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -890,9 +890,9 @@ msgstr ""
 "kalibracnim procesem?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Vys. vykon"
 
@@ -902,40 +902,39 @@ msgstr "Vys. vykon"
 msgid "Homing"
 msgstr "Homing"
 
-
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Vent. hotendu:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Nyni provedu z kalibraci."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER: CHYBA HOMINGU"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "CHYBA POHYBU IDLERU"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "NEPLATNY NASTROJ"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -949,29 +948,29 @@ msgid "Improving bed calibration point"
 msgstr "Upresnovani kalibracniho bodu"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Informace"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Zav. SD karty"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Vlozte filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr "Vlozte filament (nezavadejte) do extruderu a stisknete tlacitko"
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -980,14 +979,14 @@ msgstr ""
 "chyba pretrvava, kontakujte tech. podporu"
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Je filament zaveden?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Je tiskovy plat na podlozce?"
 
@@ -997,124 +996,124 @@ msgid "Iteration"
 msgstr "Opakovani"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Posledni tisk"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Selhani posl. tisku"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Vlevo"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Levy vent na trysce?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Vlevo [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Normalni"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Ztlumeny"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Korekce lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Doladeni osy Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Nacist vse"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Zavest filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Zavest do extr."
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Zavest do trysky"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Cisteni barvy"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Zavadeni filamentu"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Uvolnena remenicka"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Hlasity"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "AKTUALIZUJTE MMU FW"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Interni chyba MMU FW, resetujte MMU"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NEODPOVIDA"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU opakovani: Obnova teploty..."
 
@@ -1125,18 +1124,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST SELAHL"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Selhani MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU selhani zav"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1145,7 +1144,7 @@ msgstr ""
 "pretrvavaji, kontaktujte podporu."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1154,108 +1153,109 @@ msgstr ""
 "pretrvavaji, kontaktujte podporu."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 pripojeno"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Komp. magnetu"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Hlavni nabidka"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Merene zkos."
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Merim referencni vysku kalibracniho bodu"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Mesh"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Mesh Bed Leveling"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mod"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Probiha zmena modu..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Vice info na webu"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Posunout X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Posunout Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Posunout Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Posunout osu"
 
@@ -1267,10 +1267,10 @@ msgstr "Presun selektoru"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/A"
 
@@ -1280,75 +1280,75 @@ msgid "New firmware version available:"
 msgstr "Vysla nova verze firmware:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Ne"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Zadna SD karta"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Bez pohybu."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Zadne"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nezapojeno"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Netoci se"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Nyni zkalibruji vzdalenost mezi koncem trysky a povrchem podlozky."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Nyni predehreji trysku pro PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Nyni odstrante testovaci vytisk z tiskoveho platu."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Tryska"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Tryska"
 
@@ -1360,81 +1360,81 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Vyp"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "Zap"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Jednou"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "STOP: CHYBA TEPLOTY"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kal."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kal. ukoncena"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibrace"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Nahrivani PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "PINDA kalibrace selhala"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1443,7 +1443,7 @@ msgstr ""
 "menu Nastaveni->Tepl. kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "KLADKA SE NEOTACI"
 
@@ -1454,13 +1454,13 @@ msgid "Parking selector"
 msgstr "KLADKA SE NEOTACI"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pozastavit tisk"
 
@@ -1471,7 +1471,7 @@ msgid "Performing cut"
 msgstr "Provadim rez"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1480,7 +1480,7 @@ msgstr ""
 "prvnich 4 bodu. Pokud tryska zachyti papir, okamzite vypnete tiskarnu."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1489,35 +1489,35 @@ msgstr ""
 "Pruvodce restartovanim tiskarny."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Prosim zkontrolujte zapojeni IR senzoru a vyjmuty filament"
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Zkontrolujte:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Prosim ocistete podlozku a stisknete tlacitko."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 "Prosim vlozte filament do extruderu a stisknete tlacitko k jeho zavedeni"
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1526,50 +1526,50 @@ msgstr ""
 "zavedeni"
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Prosim nejdriv zavedte filament"
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Prosim otevrete idler a manualne odstrante filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Umistete prosim tiskovy plat na podlozku"
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Pro vysunuti filamentu stisknete prosim tlacitko"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Prosim vyjmete urychlene filament"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Nejprve prosim sundejte transportni soucastky."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Odstrante prosim tiskovy plat z podlozky."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Nejprve spustte kalibraci XYZ."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Prosim vyjmete filament a zopakujte tuto akci"
 
@@ -1579,51 +1579,51 @@ msgid "Please upgrade."
 msgstr "Prosim aktualizujte."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Prosim cekejte"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Vypadky proudu"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Predehrev"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Predehrejte trysku!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Predehrev trysky. Prosim cekejte."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Predehrev ke strihu"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Predehrev k vysunuti"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Predehrev k zavedeni"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Predehrev k vyjmuti"
 
@@ -1634,48 +1634,48 @@ msgid "Preparing blade"
 msgstr "Pripravuji cepel"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Stisknete tlacitko"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pro nahrati trysky a pokracovani stisknete tlacitko."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Tisk prerusen"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Tiskovy vent.:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Tisk z SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Tisk pozastaven"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Cas tisku"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "IP adr. tiskarny:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1698,11 +1698,11 @@ msgstr ""
 "Tisk zrusen."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
-"Kladkový motor se zastavil. Ujistete se, ze neni pohyb blokovan a zkontrolujte "
-"zapojeni."
+"Kladkový motor se zastavil. Ujistete se, ze neni pohyb blokovan a "
+"zkontrolujte zapojeni."
 
 #. MSG_PROGRESS_PUSH_FILAMENT c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:23
@@ -1711,37 +1711,37 @@ msgid "Pushing filament"
 msgstr "Posun filamentu"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "FRONTA PLNA"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Vzadu [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Obnovovani tisku"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr "Vyjmete stary filament a stisknete tlacitko pro zavedeni noveho."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Prejmenovat"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1750,29 +1750,29 @@ msgstr ""
 "nachazi nastrojovy index mimo rozsah (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Pokracovat"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Obnoveni tisku"
 
@@ -1783,7 +1783,7 @@ msgid "Retract from FINDA"
 msgstr "Vysouvani od FINDy"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Znovu"
 
@@ -1794,17 +1794,17 @@ msgid "Returning selector"
 msgstr "Vracim selektor"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Vpravo"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Vpravo [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1813,70 +1813,69 @@ msgstr ""
 "kalibracni proces od zacatku. Pokracovat?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD karta"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELEKTOR: HOMING ERR"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELEKTOR SE NEHYBE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "ZASTAVENO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Hledam kalibracni bod podlozky"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Vybrat"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr "Zvolte filament pro kalibraci prvni vrstvy z nasledujiciho menu"
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Vyberte extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Zvolte filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Vyber jazyka"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr "Vyberte teplotu predehrati trysky ktera odpovida vasemu materialu."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Zvolte teplotu, ktera odpovida vasemu materialu."
 
@@ -1887,61 +1886,61 @@ msgid "Selecting fil. slot"
 msgstr "Vyber fil. slot"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Selftest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Start Selftestu"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Selftest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Chyba Selftestu!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Selftest selhal"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr "Pro kalibraci presneho rehomovani bude nyni spusten selftest."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Senzor info"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Senzor overen, vyjmete filament."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Nastavte teplotu:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Nastaveni"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Tezke zkos."
 
@@ -1952,7 +1951,7 @@ msgid "Sheet"
 msgstr "Plat"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1965,18 +1964,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Stav konc. spin."
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Tichy"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Lehke zkos."
 
@@ -1990,13 +1989,13 @@ msgstr ""
 "setrideni je 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Vyskytl se problem, srovnavam osu Z ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Trideni"
 
@@ -2007,70 +2006,70 @@ msgid "Sorting files"
 msgstr "Trideni souboru"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Zvuk"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Rychlost"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Toci se"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr "Je vyzadovana stabilni pokojova teplota 21-26C a pevna podlozka."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Tichy"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Tiskove platy"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Zastavit tisk"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Prisne"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Podpora"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Prohozene"
 
@@ -2079,70 +2078,60 @@ msgstr "Prohozene"
 msgid "THERMAL ANOMALY"
 msgstr "TEPLOTNI VYJIMKA"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM ladeni selhalo"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "CHYBA TMC DRIVER"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC RESET DRIVERU"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER: ZKRAT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC CHYBA: PREHRATI"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC CHYBA NIZKE NAP."
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Ladeni tepl. modelu"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Teplota"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Teploty"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Testovani filamentu"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 "Idler nemuze najit vych. pozici. Zkontrolujte, zda neco neblokuje jeho pohyb."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2151,7 +2140,7 @@ msgstr ""
 "MMU aktualni firmware."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2159,7 +2148,7 @@ msgstr ""
 "pohyb."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2169,7 +2158,7 @@ msgstr ""
 "vysku. Postupujte podle obrazku v handbooku (kapitola Kalibrace)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2178,49 +2167,49 @@ msgstr ""
 "Zaciname, sekce Postup kalibrace."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Cas"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Timeout"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Celkem"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Celkem selhani"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filament celkem"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Celkovy cas tisku"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Ladit"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "MANUALNI VYJMUTI"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2229,20 +2218,20 @@ msgstr ""
 "selektor se muze hybat. Zkontrolujte zapojeni."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Vyjmout"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Vyjmout filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Vysouvam filament"
 
@@ -2259,23 +2248,23 @@ msgid "Unloading to pulley"
 msgstr "Vysunuti ke kladce"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Overeni selhalo, vyjmete filament a zkuste znovu."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Napeti"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "TMC: VYSOKA TEPLOTA!"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2288,199 +2277,195 @@ msgstr ""
 "Stealth modu"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Ceka se na uzivatele"
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Cekani na zchladnuti PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Cekani na zchladnuti trysky a podlozky."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Varovat"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Varovani: doslo ke zmene typu tiskarny a motherboardu."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Varovani: doslo ke zmene typu motherboardu."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Varovani: doslo ke zmene typu tiskarny."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Bylo vysunuti filamentu uspesne?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Chyba zapojeni"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Pruvodce"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Korekce X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "Detaily XYZ kal."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Kalibrace XYZ selhala. Nahlednete do manualu."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y vzdalenost od min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Korekce Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Ano"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Pruvodce muzete kdykoliv znovu spustit z menu Kalibrace -> Pruvodce"
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Korekce Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Pocet mereni Z"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] odsazeni bodu"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "a stisknete tlacitko"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "k zavedeni filamentu"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "k vyjmuti filamentu"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "neznamy"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "neznamy stav"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Obnovit"
 
@@ -2546,3 +2531,9 @@ msgstr "🔃Obnovit"
 
 #~ msgid "Press the knob to resume nozzle temperature."
 #~ msgstr "Pro pokracovani nahrivani trysky stisknete tlacitko."
+
+#~ msgid "TM autotune failed"
+#~ msgstr "TM ladeni selhalo"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Ladeni tepl. modelu"

lang/po/Firmware_da.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr ""
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ""
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr ""
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr ""
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr ""
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr ""
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr ""
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr ""
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr ""
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -168,209 +168,209 @@ msgid ""
 msgstr ""
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr ""
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr ""
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr ""
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr ""
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr ""
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr ""
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr ""
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr ""
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr ""
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr ""
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr ""
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr ""
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr ""
 
@@ -380,7 +380,7 @@ msgid "Crash detected."
 msgstr ""
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -388,34 +388,34 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr ""
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr ""
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr ""
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr ""
 
@@ -427,7 +427,7 @@ msgid "Disengaging idler"
 msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -436,19 +436,19 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
 msgstr ""
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr ""
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr ""
 
@@ -477,13 +477,13 @@ msgid "ERR Wait for User"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr ""
 
@@ -495,17 +495,17 @@ msgid "Ejecting filament"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr ""
 
@@ -517,121 +517,121 @@ msgid "Engaging idler"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr ""
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr ""
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr ""
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr ""
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr ""
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr ""
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr ""
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr ""
 
@@ -660,109 +660,109 @@ msgid "Feeding to nozzle"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr ""
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
 msgstr ""
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr ""
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr ""
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr ""
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr ""
 
@@ -805,42 +805,42 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr ""
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr ""
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -848,7 +848,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -857,9 +857,9 @@ msgstr ""
 "dig gennem installationsprocessen?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr ""
 
@@ -870,38 +870,38 @@ msgid "Homing"
 msgstr ""
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr ""
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr ""
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -913,43 +913,43 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr ""
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr ""
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr ""
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr ""
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
@@ -959,124 +959,124 @@ msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr ""
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr ""
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr ""
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr ""
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr ""
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr ""
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr ""
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr ""
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr ""
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr ""
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
@@ -1087,133 +1087,134 @@ msgid "MMU SELFTEST FAILED"
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr ""
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
 msgstr ""
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr ""
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr ""
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr ""
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr ""
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr ""
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr ""
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr ""
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr ""
 
@@ -1225,10 +1226,10 @@ msgstr ""
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr ""
 
@@ -1238,75 +1239,75 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr ""
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr ""
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr ""
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr ""
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr ""
 
@@ -1318,88 +1319,88 @@ msgstr ""
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr ""
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr ""
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr ""
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr ""
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr ""
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr ""
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr ""
 
@@ -1410,13 +1411,13 @@ msgid "Parking selector"
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr ""
 
@@ -1427,97 +1428,97 @@ msgid "Performing cut"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
 msgstr ""
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr ""
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
 msgstr ""
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr ""
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr ""
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr ""
 
@@ -1527,51 +1528,51 @@ msgid "Please upgrade."
 msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr ""
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr ""
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr ""
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr ""
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr ""
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr ""
 
@@ -1582,48 +1583,48 @@ msgid "Preparing blade"
 msgstr ""
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr ""
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr ""
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr ""
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr ""
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1642,7 +1643,7 @@ msgid ""
 msgstr ""
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 
@@ -1653,66 +1654,66 @@ msgid "Pushing filament"
 msgstr ""
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr ""
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr ""
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr ""
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr ""
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr ""
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr ""
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr ""
 
@@ -1723,7 +1724,7 @@ msgid "Retract from FINDA"
 msgstr ""
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr ""
 
@@ -1734,87 +1735,86 @@ msgid "Returning selector"
 msgstr ""
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr ""
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr ""
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr ""
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr ""
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr ""
 
@@ -1825,61 +1825,61 @@ msgid "Selecting fil. slot"
 msgstr ""
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr ""
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr ""
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr ""
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr ""
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr ""
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr ""
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr ""
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr ""
 
@@ -1890,7 +1890,7 @@ msgid "Sheet"
 msgstr ""
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1899,18 +1899,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr ""
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr ""
 
@@ -1922,13 +1922,13 @@ msgid ""
 msgstr ""
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr ""
 
@@ -1939,70 +1939,70 @@ msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr ""
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr ""
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr ""
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr ""
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr ""
 
@@ -2011,82 +2011,72 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr ""
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr ""
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr ""
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr ""
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr ""
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr ""
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr ""
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2094,76 +2084,76 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr ""
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr ""
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr ""
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr ""
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr ""
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
 msgstr ""
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr ""
 
@@ -2180,23 +2170,23 @@ msgid "Unloading to pulley"
 msgstr ""
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr ""
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr ""
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr ""
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2205,196 +2195,192 @@ msgid ""
 msgstr ""
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr ""
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr ""
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr ""
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr ""
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr ""
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr ""
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr ""
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr ""
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr ""
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr ""
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr ""
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr ""
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr ""
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr ""
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr ""
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr ""
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr ""
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_de.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 oder älter"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 oder neuer"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s Level erwartet"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Abbruch"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Z Anpassen:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Alles richtig"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Alles abgeschlossen. Viel Spaß beim Drucken!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alphabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Immer"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Raumtemp."
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Sind linke+rechte Z- Schlitten ganz oben?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Assist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Startposition"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Auto Leist"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "AutoLaden Filament"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -117,50 +117,50 @@ msgid "Avoiding grind"
 msgstr "Vermeide schleifen"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Achse"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Achsenlänge"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Zurück"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Bett"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Bett aufwärmen"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Bett OK"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Bett Level Korr."
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -171,55 +171,55 @@ msgstr ""
 "Z-Kal. fehlgeschlg. Sensor nicht ausgelöst. Schmutzige Düse? Warte auf Reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Bett/Heizung"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Gurtstatus"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Riementest"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Stromausfall! Druck wiederherstellen?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Hell"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Helligkeit"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "KOMMUNIKATIONSFEHLER"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibrierung XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibrierung Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -228,13 +228,13 @@ msgstr ""
 "Anschliessend den Knopf drücken."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibriere Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -243,143 +243,143 @@ msgstr ""
 "Anschliessend den Knopf drücken."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibriere Start"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibrierung"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibrierung OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Kann Selektor oder Riemenscheibe nicht bewegen."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "Die Aktion kann nicht ausgeführt werden, das Filament ist bereits geladen. "
 "Entladen Sie es zuerst."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "SD Karte entfernt"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Wechsel SD Karte"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Filament-Wechsel"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Wechsel erfolgr.!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Wechsel ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Prüfe X Achse"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Prüfe Y Achse"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Prüfe Z Achse"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Prüfe Bett"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Prüfe Endschalter"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Überprüfe Datei"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Prüfe Düse"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Prüfe Sensoren"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Kontrolle"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Falsche Farbe"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Von der Community"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Weit."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Abkühlen"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Gewählte Sprache kopieren?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Crash"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Crash Erk."
 
@@ -389,7 +389,7 @@ msgid "Crash detected."
 msgstr "Crash erkannt."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -400,34 +400,34 @@ msgstr ""
 "genutzt werden"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Fil. schneiden"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Messer"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Dimm"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Deaktiv."
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Motoren aus"
 
@@ -439,7 +439,7 @@ msgid "Disengaging idler"
 msgstr "Spannrol. auskuppeln"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -451,7 +451,7 @@ msgstr ""
 "Abschnitt Erste Schicht Kalibrierung."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -460,12 +460,12 @@ msgstr ""
 "und Druckbett neu einzustellen?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Klar"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-Korrektur:"
 
@@ -494,13 +494,13 @@ msgid "ERR Wait for User"
 msgstr "FEHL. Warte Benutzer"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "FEHLER:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Filamentauswurf"
 
@@ -512,17 +512,17 @@ msgid "Ejecting filament"
 msgstr "werfe Filament aus"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Endanschlag"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Ende nicht getroffen"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Endschalter"
 
@@ -534,47 +534,47 @@ msgid "Engaging idler"
 msgstr "Spannrol. einkuppeln"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Extruder Info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autoladen"
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F. Stau entd."
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "FS. Auslauf"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FIL. BEREITS GELADEN"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA N. AUSGELÖST"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -584,7 +584,7 @@ msgstr ""
 "FINDA funktioniert."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -593,67 +593,67 @@ msgstr ""
 "sich das Filament bewegen kann und FINDA funktioniert."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA NICHT FIL.FREI"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS Aktion"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR N. AUSGELÖST"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR ZU FRÜH"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR N. FIL.FREI"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW-LAUFZEITFEHLER"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Fehlerstatistik"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "MMU-Fehler"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falschtriggerung"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Lüfter-Tempo"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Lüftertest"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Lüfter Check"
 
@@ -682,45 +682,45 @@ msgid "Feeding to nozzle"
 msgstr "Zufuhr zur Düse"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fil. Mängel"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. Sensor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament extrudiert mit richtiger Farbe?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. nicht geladen"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Filamentsensor"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -729,7 +729,7 @@ msgstr ""
 "sicher, dass sich das Fil. bewegen kann und der Sensor funktioniert."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -739,7 +739,7 @@ msgstr ""
 "funktioniert."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -748,52 +748,52 @@ msgstr ""
 "dass nichts im PTFE-Schlauch fest- sitzt und der Sensor richtig liest."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Filament benutzt"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Datei unvollständig Trotzdem fortfahren?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Bewegung beenden"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Erste-Schicht Kal."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Zunächst führe ich den Selbsttest durch, um die häufigsten Probleme beim "
 "Zusammenbau zu überprüfen."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Durchfluss"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Drucklüfter?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Vorne [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Druck/Extr. Lüfter"
 
@@ -842,42 +842,42 @@ msgstr ""
 "Druck abgebrochen."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW Einstellungen"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Heizung/Thermistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Aufwärmen"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Heizung durch Sicherheitstimer deaktiviert."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Aufwärmen OK."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -888,7 +888,7 @@ msgstr ""
 "Danach können Sie drucken."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -897,9 +897,9 @@ msgstr ""
 "durch den Einricht- ungsablauf führe?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Hohe leist"
 
@@ -910,40 +910,40 @@ msgid "Homing"
 msgstr "Startposition"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1118
-#: ../../Firmware/ultralcd.cpp:7271
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend-Lüfter:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 "Ich werde jetzt die XYZ-Kalibrierung durchführen. Es wird ca. 12 Minuten "
 "dauern."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Ich werde jetzt die Z Kalibrierung durchführen."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "SPANNRO. STARTP.FEH."
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "SPANNROL. SITZT FEST"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "UNGÜLTIGER FIL.PLATZ"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -957,22 +957,22 @@ msgid "Improving bed calibration point"
 msgstr "Verbesserung des Bettkalibrierungs- punkts"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Infoanzeige"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. SD Karte"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Filament einlegen"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -981,7 +981,7 @@ msgstr ""
 "den Knopf."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -991,14 +991,14 @@ msgstr ""
 "sich an den Support."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Ist das Filament geladen?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Liegt das Stahlblech auf dem Heizbett?"
 
@@ -1008,124 +1008,124 @@ msgid "Iteration"
 msgstr "Wiederholung"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Letzter Druck"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Letzte Druckfehler"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Links"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Extruderlüfter?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Links [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Hell.wert"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Dimmwert"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Lineare Korrektur"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Z einstellen"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Alle laden"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Filament laden"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Lade zum Extruder"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "In Düse laden"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Lade Farbe"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Filament lädt"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Lose Riemenscheibe"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Laut"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE NÖTIG"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU interner Firmware Fehler, bitte setzen Sie die MMU zurück."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU Mod."
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU REAGIERT NICHT"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU-Neuversuch: Wiederherstelle die Temperatur..."
 
@@ -1136,18 +1136,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELBSTTEST FEHL."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "MMU Fehler"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU Ladefehler"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1157,7 +1157,7 @@ msgstr ""
 "Support."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1166,108 +1166,109 @@ msgstr ""
 "das Problem weiterhin besteht, wenden Sie sich an den Support."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 verbunden"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Magnet Komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Hauptmenü"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Schräglauf"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Messen der Referenzhöhe des Kalibrierpunktes"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Gitter"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "MeshBett Ausgleich"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Modus"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Moduswechsel erfolgt..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Weiter Details online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Bewege X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Bewege Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Bewege Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Achse bewegen"
 
@@ -1279,10 +1280,10 @@ msgstr "Bewege Selektor"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/V"
 
@@ -1292,75 +1293,75 @@ msgid "New firmware version available:"
 msgstr "Neue Firmware- Version verfügbar:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nein"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Keine SD Karte"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Keine Bewegung."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Ohne"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nicht angeschlossen"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Dreht sich nicht"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Jetzt kalibriere ich den Abstand zwischen Düsenspitze und Druckbett."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Jetzt werde ich die Düse für PLA vorheizen."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Testdruck jetzt von Stahlblech entfernen."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Düse"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Düsen Dia."
 
@@ -1372,82 +1373,82 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Aus"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "An"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Einmal"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSE THERM. FEHLER"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID Kal."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID Kalib. fertig"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID Kalibrierung"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "PINDA erwärmen"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA Kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "PINDA-Kalibrierung fehlgeschlagen"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1456,7 +1457,7 @@ msgstr ""
 "Menü Einstellungen -> PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "RIEHMENS. SITZT FEST"
 
@@ -1467,13 +1468,13 @@ msgid "Parking selector"
 msgstr "Parke Selektor"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pause"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Druck pausieren"
 
@@ -1484,7 +1485,7 @@ msgid "Performing cut"
 msgstr "Führe Schnitt aus"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1493,7 +1494,7 @@ msgstr ""
 "ersten 4 Punkte. Drucker sofort aus- schalten, wenn das Papier erfasst wird."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1502,29 +1503,29 @@ msgstr ""
 "mit dem Assistenten fort, indem Sie den Drucker neu starten."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Bitte IR Sensor Verbindungen über- prüfen und Filament entladen ist."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Bitte prüfen:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Bitte reinigen Sie das Heizbett und drücken Sie dann den Knopf."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Bitte entfernen Sie überstehendes Fil- ament von der Düse. Klicken wenn "
 "sauber."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
@@ -1532,7 +1533,7 @@ msgstr ""
 "laden."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1541,50 +1542,50 @@ msgstr ""
 "Sie dann den Knopf, um es zu laden."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Bitte laden Sie zuerst das Filament."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Bitte Spannrolle öffnen und Filament von Hand entfernen"
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Bitte legen Sie das Stahlblech auf das Heizbett."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Bitte drücken Sie den Knopf um das Filament zu entladen."
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Bitte ziehen Sie das Filament sofort heraus"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Bitte zuerst Transportsicherungen entfernen."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Bitte entfernen Sie das Stahlblech vom Heizbett."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Bitte zuerst XYZ Kalibrierung ausführen."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Bitte entladen Sie erst das Filament und versuchen Sie es nochmal."
 
@@ -1594,51 +1595,51 @@ msgid "Please upgrade."
 msgstr "Bitte aktualisieren."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Bitte warten"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Netzfehler"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Vorheizen"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Düse vorheizen!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Vorheizen der Düse. Bitte warten."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Heizen zum Schnitt"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Heizen zum Auswurf"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Heizen zum Laden"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Heizen zum Entladen"
 
@@ -1649,48 +1650,48 @@ msgid "Preparing blade"
 msgstr "Bereite Messer vor"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Knopf drücken zum"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Bitte drücken Sie den Knopf um die Düse vorzuheizen und fortzufahren."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Druck abgebrochen"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Drucklüfter:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Drucken von SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Druck pausiert"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Druckzeit"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Drucker IP Adr.:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1713,7 +1714,7 @@ msgstr ""
 "den Wert in den Einstellungen. Druck abgebrochen."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Der Riemenscheiben- motor ist blockiert. Sicherstellen, dass sich die "
@@ -1726,39 +1727,39 @@ msgid "Pushing filament"
 msgstr "Schiebe Filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "QUEUE VOLL"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Hinten [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Druck wiederherst"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Entfernen Sie das alte Filament und drücken Sie den Knopf, um das neue zu "
 "laden."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Umbenennen"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1767,29 +1768,29 @@ msgstr ""
 "Prüfen Sie den G-Code auf Plätze außerhalb des Bereichs (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset XYZ Kalibr."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Druck fortsetzen"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Druck fortgesetzt"
 
@@ -1800,7 +1801,7 @@ msgid "Retract from FINDA"
 msgstr "Einziehen von FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Wdh."
 
@@ -1811,17 +1812,17 @@ msgid "Returning selector"
 msgstr "Selektor zurückfahr."
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Rechts"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Rechts [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1830,40 +1831,39 @@ msgstr ""
 "beginnen. Fortfahren?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD Karte"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELEK. STARTPOSFEHL."
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELEKTOR SITZT FEST"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "GESTOPPT."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Suche Bett Kalibrierpunkt"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Auswahl"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1872,30 +1872,30 @@ msgstr ""
 "im On-Screen-Menü aus."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Wähle extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Wähle filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Wähle Sprache"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr "Bitte Vorheiztemperatur auswählen, die Ihrem Material entspricht."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Wählen Sie die Temperatur, die zu Ihrem Material passt."
 
@@ -1906,61 +1906,61 @@ msgid "Selecting fil. slot"
 msgstr "Wähle Filament Platz"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Selbsttest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Selbsttest start"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Selbsttest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Selbsttest Fehler!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Selbsttest Error"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr "Selbsttest wird gestartet, um Startposition zu kalibrieren."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Sensor Info"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Sensor überprüft, entladen Sie jetzt das Filament."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Temp. einstellen:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Einstellungen"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Sehr schräg"
 
@@ -1971,7 +1971,7 @@ msgid "Sheet"
 msgstr "Stahlblech"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1984,18 +1984,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Endschalter Status"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Leise"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Leicht schräg"
 
@@ -2008,13 +2008,13 @@ msgstr ""
 "Einige Dateien wur- den nicht sortiert. Max. Dateien pro Verzeichnis = 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Fehler aufgetreten, Z-Kalibrierung erforderlich..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Sort."
 
@@ -2025,71 +2025,71 @@ msgid "Sorting files"
 msgstr "Sortiere Dateien"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Ton"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Geschwindigkeit"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Dreht sich"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Stabile Umgebungs- temperatur 21-26C und feste Stand- fläche erforderlich."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistiken"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Leise"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Stahlbleche"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Druck abbrechen"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Strikt"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Support"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Ausgetauscht"
 
@@ -2098,63 +2098,53 @@ msgstr "Ausgetauscht"
 msgid "THERMAL ANOMALY"
 msgstr "THERMISCHE ANOMALIE"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM kal. fehlgeschlg."
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC TREIBER FEHLER"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC TREIBER RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC KURZSCHLUSS"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC ÜBERHITZ.FEHL."
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNTERSPANN.FEHL."
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Temp. Model Autokal."
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatur"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperaturen"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Teste filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2162,7 +2152,7 @@ msgstr ""
 "ob irgendetwas seine Bewegung blockiert."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2172,7 +2162,7 @@ msgstr ""
 "Stand ist."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2180,7 +2170,7 @@ msgstr ""
 "irgendetwas seine Bewegung blockiert."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2191,7 +2181,7 @@ msgstr ""
 "im Handbuch (Kapitel Kalibrierung)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2200,49 +2190,49 @@ msgstr ""
 "Erste Schritte, Abschnitt Kalibrierablauf."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Zeit"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Timeout"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Gesamt"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Gesamte Fehler"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Gesamtes Filament"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Gesamte Druckzeit"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Feineinstellung"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "ENTLADE MANUELL"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2251,20 +2241,20 @@ msgstr ""
 "FINDA befindet und der Selektor frei ist. Prüfen Sie die FINDA-Verbindung."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Entla."
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Fil. entladen"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Filament auswerfen"
 
@@ -2281,25 +2271,25 @@ msgid "Unloading to pulley"
 msgstr "Entlade zur Riemens."
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr ""
 "Überprüfung fehl- geschlagen, entladen Sie das Filament und nochmals "
 "versuchen."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Spannungen"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "WARNUNG TMC ZU HEISS"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2312,202 +2302,198 @@ msgstr ""
 "Stealth Modus"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Warte auf Benutzer.."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Warten, bis PINDA- Sonde abgekühlt ist"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Warten bis Heizung und Bett abgekühlt sind"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Warnen"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Warnung: Druckertyp und Platinentyp wurden beide geändert."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Warnung: Platinentyp wurde geändert."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Warnung: Druckertyp wurde geändert."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Konnten Sie das Filament entnehmen?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Verdrahtungsfehler"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Assistent"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "X-Korrektur:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ Kal. Details"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "XYZ Kalibrierung in Ordnung. Schräglauf wird automatisch korrigiert."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 "XYZ Kalibrierung in Ordnung. X/Y Achsen sind etwas schräg. Gut gemacht!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "XYZ-Kalibrierung beeinträchtigt. Vordere Kal.-Punkte nicht erreichbar."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 "XYZ-Kalibrierung beeinträchtigt. Kal. -Punkt vorne rechts nicht erreichbar."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "XYZ-Kalibrierung fehlgeschlagen. Bett-Kalibrierpunkt nicht gefunden."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "XYZ-Kalibrierung fehlgeschlagen. Vordere Kal.-Punkte nicht erreichbar."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "XYZ-Kalibrierung fehlgeschlagen. Kal. -Punkt vorne rechts nicht erreichbar."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "XYZ-Kalibrierung ok. X/Y-Achsen sind senkrecht zueinander Glückwunsch!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y Entfernung vom Min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Y-Korrektur:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Ja"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Im Menü Kalibrierung -> Assistent können Sie den Assistenten immer neu "
 "starten."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Z-Korrektur:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z-Test Nr."
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] Punktversatz"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "und Knopf drücken"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "um Filament laden"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "um Filament entladen"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "unbekannt"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "Status unbekannt"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Aktualisiere"
 
@@ -2576,3 +2562,9 @@ msgstr "🔃Aktualisiere"
 
 #~ msgid "Runouts"
 #~ msgstr "Mängel"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "TM kal. fehlgeschlg."
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Temp. Model Autokal."

lang/po/Firmware_es.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 o mayor"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 o mas nueva"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s nivel esperado"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Cancelar"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Ajustar-Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Todo bien"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Terminado. Felices impresiones!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Siemp."
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Ambiente"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Carros Z izq./der. estan arriba maximo?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Llevar al origen"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Encendido"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Carga auto. filam."
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -116,50 +116,50 @@ msgid "Avoiding grind"
 msgstr "Evitar morder"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Eje"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Longitud del eje"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "atras"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Base"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Calentando Base"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Base preparada"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Corr. de la cama"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -170,55 +170,55 @@ msgstr ""
 "Nivelacion fallada. Sensor no funciona. Restos en boquilla? Esperando reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Base/Calentador"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Estado de correa"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test cinturon"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Se fue la luz. Re- anudar la impresion?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Brill."
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Brillo"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "ERROR COMUNICACION"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Calibrar XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Calibrar Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -227,13 +227,13 @@ msgstr ""
 "superiores. Despues haz clic."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Calibrando Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -242,142 +242,142 @@ msgstr ""
 "superiores. Despues haz clic."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Calibrar pos.inicial"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Calibracion"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Calibracion OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "No se puede mover Selector o Tensor."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "No se puede realizar la acción, filamento ya cargado. Descárgalo primero."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Tarjeta retirada"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Cambiar Tarj. SD"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Cambiar filamento"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Cambio correcto!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Cambio correcto?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Control sensor X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Control sensor Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Control sensor Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Control base cal."
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Control endstops"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Verif. archivo"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Control fusor"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Comprobando sensores"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Comprobaciones"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Color no homogeneo"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Desde la comunidad"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Cont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Enfriar"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Copiar idioma seleccionado?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Choque"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Det. choque"
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Choque detectado."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -398,34 +398,34 @@ msgstr ""
 "Modo normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Cortar filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Cuchillo"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Fecha:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Oscuro"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Desactiva"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Apagar motores"
 
@@ -437,7 +437,7 @@ msgid "Disengaging idler"
 msgstr "Soltando tensor"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -449,7 +449,7 @@ msgstr ""
 "primera capa."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -457,12 +457,12 @@ msgstr ""
 "Quieres repetir el ultimo paso para reajustar la distancia boquilla-base?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Listo"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "Corregir-E:"
 
@@ -491,13 +491,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Espera usuario"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "ERROR:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Expulsar fil."
 
@@ -509,17 +509,17 @@ msgid "Ejecting filament"
 msgstr "Expulsando filamento"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Final de carrera"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Endstop no alcanzado"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Finales de carrera"
 
@@ -531,47 +531,47 @@ msgid "Engaging idler"
 msgstr "Enganchando tensor"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruir"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Info. del extrusor"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "Autocarg.fil."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "Det. atasco f"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "Fin fil."
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FIL. YA CARGADO"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NO SE ACTIVO"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -580,7 +580,7 @@ msgstr ""
 "manualmente. Comprueba que el fi-lamento puede mover-se y FINDA funciona."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -589,67 +589,67 @@ msgstr ""
 "puede moverse y FINDA funciona."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: ATASCO FIL."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS accion"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR NO SE ACTIVO"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR MUY PRONTO"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR: ATASCO FIL."
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "ERROR EJECUCION FW"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Estadistica Fallos"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Total Fallos MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falsa activacion"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Velocidad Vent"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test ventiladores"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Comprob.vent"
 
@@ -678,45 +678,45 @@ msgid "Feeding to nozzle"
 msgstr "Aliment. a la boq."
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fil. acabado"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Sensor Fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filamento"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Es nitido el color nuevo?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. no introducido"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Sensor de fil."
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -725,7 +725,7 @@ msgstr ""
 "Asegúrate de que el filamento puede moverse y el sensor funciona."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -734,7 +734,7 @@ msgstr ""
 "el filamento llegó al sensor y que éste funciona."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -744,52 +744,52 @@ msgstr ""
 "ok."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Filamento usado"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Archivo incompleto. Continuar de todos modos?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Term. movimientos"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Cal. primera cap."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Primero, hare el Selftest para comprobar los problemas de montaje mas "
 "comunes."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flujo"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Vent. frontal?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Frontal [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Vents. front/izqui"
 
@@ -838,42 +838,42 @@ msgstr ""
 "Impresion cancelada."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Código G"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "Configuracion HW"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Calentador/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Calentando..."
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Calentadores desactivados por el temporizador de seguridad."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Calentando acabado."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -884,7 +884,7 @@ msgstr ""
 "listo para imprimir."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -893,9 +893,9 @@ msgstr ""
 "configuracion?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Rend.pleno"
 
@@ -906,38 +906,38 @@ msgid "Homing"
 msgstr "Homing"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Vent. d. fusor:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Voy a hacer Calibracion Z ahora."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "TENSOR: ERROR HOME"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "TENSOR: ERROR MOV."
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "HERR. INVALIDA"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -951,22 +951,22 @@ msgid "Improving bed calibration point"
 msgstr "Mejorando punto calibracion base"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Monitorizar"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. Tarjeta SD"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Introducir filamento"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -974,7 +974,7 @@ msgstr ""
 "Inserta el filamento (no lo cargue) en el extrusor y luego presiona el dial."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -983,14 +983,14 @@ msgstr ""
 "firmware. Si el problema persiste, ponte en contacto con el servicio tecnico."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Esta el filamento cargado?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Esta c. la lamina sobre la base?"
 
@@ -1000,124 +1000,124 @@ msgid "Iteration"
 msgstr "Iteracion"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Ultima impresion"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Ultimos imp. fallos"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Izquierda"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Vent. izquierdo?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Izquierda [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Valor brill."
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Valor oscuro"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Correc. Linealidad"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Micropaso Eje Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Intr. todos fil."
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Introducir filam."
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Cargar al extrusor"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Cargar a boquilla"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Cambiando color"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Introduciendo filam."
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Polea suelta"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Alto"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "ACT. FW MMU PRECISA"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Error interno del firmware MMU, por favor reinicia el MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "Modo MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NO RESPONDE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Reintento: Restaurando temperatura..."
 
@@ -1128,18 +1128,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST FALLO"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Fallos MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "Carga MMU falla"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1148,7 +1148,7 @@ msgstr ""
 "conectores. Si el problema persiste, contacta con el servicio técnico."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1157,108 +1157,109 @@ msgstr ""
 "problema persiste, ponte en contacto con el servicio tecnico."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 conectado"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Comp. imanes"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Menu principal"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Desv. medida"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Midiendo altura del punto de calibracion"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Malla"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Nivela. Malla Base"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Modo"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Cambio de modo progresando ..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modelo"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Mas detalles online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Mover X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Mover Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Mover Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Mover ejes"
 
@@ -1270,10 +1271,10 @@ msgstr "Moviendo selector"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/D"
 
@@ -1283,51 +1284,51 @@ msgid "New firmware version available:"
 msgstr "Nuevo firmware disponible:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "No"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "No hay tarjeta SD"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Sin movimiento"
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Ninguno"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "No hay conexion"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Ventilador no gira"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
@@ -1335,25 +1336,25 @@ msgstr ""
 "la base."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Ahora precalentare la boquilla para PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Ahora retira la prueba de la lamina de acero."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Boquilla"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "D boquilla"
 
@@ -1365,20 +1366,20 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Ina"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del "
@@ -1386,62 +1387,62 @@ msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "Act"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Una vez"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSA ERROR TERMICO"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "Cal. PID"
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "Cal. PID terminada"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "Calibracion PID"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Calentando PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "Cal. PINDA"
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Fallo de la calibracion de PINDA"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1450,7 +1451,7 @@ msgstr ""
 "menu Configuracion -> Cal. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "POLEA: ERROR MOV."
 
@@ -1461,13 +1462,13 @@ msgid "Parking selector"
 msgstr "Aparcando selector"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pausa"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pausar impresion"
 
@@ -1478,7 +1479,7 @@ msgid "Performing cut"
 msgstr "Realizando corte"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1488,7 +1489,7 @@ msgstr ""
 "impresora inmediatamente."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1497,28 +1498,28 @@ msgstr ""
 "continua con el Asistente"
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 "Por favor comprueba la conexion del IR sensor y filamento esta descargado."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Controla:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Limpia la superficie de la base, por favor, y luego presiona el dial."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Limpia boquilla para calibracion. Clic cuando acabes."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
@@ -1526,7 +1527,7 @@ msgstr ""
 "cargarlo."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1535,50 +1536,50 @@ msgstr ""
 "dial para cargarlo."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Por favor, carga primero el filamento."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Por favor abre el tensor y retira el filamento manualmente."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Por favor coloca la lam. de acero en la base calefactable."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Por favor, pulsa el dial para descargar el filamento"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Por favor retira el filamento de inmediato"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Por favor retira los soportes de envio primero."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Por favor retira la lam. de acero de la base calefactable."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Por favor realiza la calibracion XYZ primero."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Primero descarga el filamento, luego repite esta accion."
 
@@ -1588,51 +1589,51 @@ msgid "Please upgrade."
 msgstr "Actualiza por favor."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Por favor espere"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Fallos energia"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Precalentar"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Precalienta extrusor"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Precalentando nozzle. Espera por favor."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Precalent. laminar"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Precalent. expulsar"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Precalent. cargar"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Precalent. descargar"
 
@@ -1643,48 +1644,48 @@ msgid "Preparing blade"
 msgstr "Preparando cuchilla"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Pulsa el dial"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pulsa el dial para precalentar la boquilla y continue."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Impresion cancelada"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Vent.fusor:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Menu tarjeta SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Impresion en pausa"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Tiempo de imp."
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Dir. IP impresora:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1707,7 +1708,7 @@ msgstr ""
 "ajustes. Impresion cancelada."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "El motor de la polea se ha parado. Asegúrate de que la polea puede moverse y "
@@ -1720,39 +1721,39 @@ msgid "Pushing filament"
 msgstr "Empujando filamento"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "COLA LLENA"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "Puerto RPi"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Trasera [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Recuper. impresion"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Retira el filamento viejo y presione el dial para comenzar a cargar el nuevo "
 "filamento."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Renombrar"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1762,29 +1763,29 @@ msgstr ""
 "T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset calibr. XYZ"
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Reanudar impres."
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Continuan. impresion"
 
@@ -1795,7 +1796,7 @@ msgid "Retract from FINDA"
 msgstr "Retraer del FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Reint"
 
@@ -1806,58 +1807,58 @@ msgid "Returning selector"
 msgstr "Selector volviendo"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Derecha"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Derecha [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
 "Ejecutar el Asistente borrara los valores de calibracion actuales y "
 "comenzara de nuevo. Continuar?"
+
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "Tarj. SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECT. SIN HOME"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECT. SIN MOVERSE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "PARADA"
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Buscando punto de calibracion base"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Seleccionar"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1866,32 +1867,32 @@ msgstr ""
 "el menu en pantalla."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Elegir extrusor:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Selecciona filam.:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Cambiar el idioma"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Selecciona la temperatura para precalentar la boquilla que se ajuste a tu "
 "material."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Selecciona la temperatura adecuada a tu material."
 
@@ -1902,63 +1903,63 @@ msgid "Selecting fil. slot"
 msgstr "Eligiendo hueco fil."
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Self test OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Iniciar Selftest"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Selftest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Error Selftest!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Fallo Selftest"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Se realizara el auto-test para calibrar con precision la vuelta a la "
 "posicion inicial sin sensores."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Info sensor"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Sensor verificado, retira el filamento ahora."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Establecer temp.:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Configuracion"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Desv. severa"
 
@@ -1969,7 +1970,7 @@ msgid "Sheet"
 msgstr "Lamina"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1982,18 +1983,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Mostrar endstops"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Acallar"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Desv. ligera"
 
@@ -2007,13 +2008,13 @@ msgstr ""
 "ordenar."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Problema encontrado, nivelacion Z forzosa ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Ordenar"
 
@@ -2024,71 +2025,71 @@ msgid "Sorting files"
 msgstr "Ordenando archivos"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Sonido"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Velocidad"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Ventilador girando"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Se necesita una temperatura ambiente ente 21 y 26C y un soporte rigido."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Estadisticas"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Sigilo"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Lamina de acero"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Parar"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Detener impresion"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Estrict"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Soporte"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Intercambiado"
 
@@ -2097,63 +2098,53 @@ msgstr "Intercambiado"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIA TERMICA"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "Fallo autotune TM"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "ERROR DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "RESET DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "CORTO DRIVER TMC"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERROR SOBRECAL TMC"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ERROR SBRVOLTAJE TMC"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Autotune model temp."
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatura"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperaturas"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Probando filamento"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2161,7 +2152,7 @@ msgstr ""
 "movimiento."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2170,7 +2161,7 @@ msgstr ""
 "de la impresora. Asegurate de que el firmware de la MMU esta actualizado."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2178,7 +2169,7 @@ msgstr ""
 "su movimiento."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2189,7 +2180,7 @@ msgstr ""
 "de calibracion)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2198,49 +2189,49 @@ msgstr ""
 "capitulo Primeros pasos, seccion Calibracion del flujo."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Fecha"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Expirar"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Total"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Fallos totales"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filamento total"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Tiempo total imp."
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Ajustar"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "DESCARGA MANUAL"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2249,20 +2240,20 @@ msgstr ""
 "FINDA y que el selector esta libre. Compruebe la conexion del FINDA."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Desc."
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Descargar fil."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Descargando fil."
 
@@ -2279,23 +2270,23 @@ msgid "Unloading to pulley"
 msgstr "Descarga hasta polea"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "La verificacion fallo, retira el filamento e intenta nuevamente."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Voltajes"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "AVISO TMC DEM. CALOR"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2308,201 +2299,197 @@ msgstr ""
 "Modo silencio"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Esperando ordenes..."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Esperando a que se enfrie la sonda PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Esperando enfriamiento de la base y extrusor."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Aviso"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 "Aviso: tanto el tipo de impresora como el tipo de la placa han cambiado."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Aviso: el tipo de placa ha cambiado."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Aviso: ha cambiado el tipo de impresora."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Se descargo con exito el filamento?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Error de conexion"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Asistente"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Corregir-X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "Detalles cal. XYZ"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "Calibracion XYZ correcta. La desviacion se corregira automaticamente."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 "Calibracion XYZ correcta. Los ejes X/Y estan ligeramente desviados. Buen "
 "trabajo!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 "Calibracion XYZ fallada. Puntos de calibracion en la base no encontrados."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "Calibracion XYZ fallada. Puntos frontales no alcanzables."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Calibracion XYZ fallada. Consulta el manual por favor."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Dist. en Y desde min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Corregir-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Si"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Siempre puedes acceder al asistente desde Calibracion -> Asistente"
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Corregir-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z-sensor nr."
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] punto offset"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "y presione el dial"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "para cargar el fil."
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "para descargar fil."
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "desconocido"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "estado desconocido"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Actualizar"
 
@@ -2573,3 +2560,9 @@ msgstr "🔃Actualizar"
 
 #~ msgid "Runouts"
 #~ msgstr "Falla"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "Fallo autotune TM"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Autotune model temp."

lang/po/Firmware_fr.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 ou +ancien"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 ou +recent"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "niveau %s attendu"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Annuler"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Ajuster Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Tout est correct"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Tout est pret. Bonne impression!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alphabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Tjrs"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Ambiant"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Z~carriages gauche + droite tout en haut?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Assist"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Mise a 0 des axes"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Puiss.auto"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autocharge du fil."
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -116,50 +116,50 @@ msgid "Avoiding grind"
 msgstr "Eviter broiement"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Axe"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Longueur de l'axe"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Retour"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Lit"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Chauffe du lit"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Plateau termine"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Reglage plateau"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -171,55 +171,55 @@ msgstr ""
 "attente d'un reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Lit/Chauffage"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Statut courroie"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test de courroie"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Coupure detectee. Reprendre impres.?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Brill."
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Luminosite"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "ERREUR COMMUNICATION"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Calibrer XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Calibrer Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -228,13 +228,13 @@ msgstr ""
 "l'axe Z jusqu'aux butees. Cliquez une fois fait."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Calibration Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -243,143 +243,143 @@ msgstr ""
 "Z jusqu'aux butees. Cliquez une fois fait."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Calib. mise a 0"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Calibration"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Calibration terminee"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Impossible de deplacer le Selecteur ou l'Idler."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "Impossible d'effectuer l'action, le filament est deja charge. Dechargez-le "
 "d'abord."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Carte retiree"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Changez carte SD"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Changer filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Changement reussi!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Change correctement?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Verification axe X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Verification axe Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Verification axe Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Verif. plateau chauf"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Verification butees"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Verific. fichier"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Verif. du hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Verif. des capteurs"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Verifications"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Couleur incorrecte"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Fait de community"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Cont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Refroidissement"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Copier la langue choisie?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Crash"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Detect.crash"
 
@@ -389,7 +389,7 @@ msgid "Crash detected."
 msgstr "Crash detecte."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -401,34 +401,34 @@ msgstr ""
 "mode Normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Coupe filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Coupeur"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Date:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Sombre"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Desact."
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Desactiver moteurs"
 
@@ -440,7 +440,7 @@ msgid "Disengaging idler"
 msgstr "Desenga.t de l'idler"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -452,7 +452,7 @@ msgstr ""
 "Calibration de la premiere couche."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -461,12 +461,12 @@ msgstr ""
 "plateau chauffant?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Fait"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "Correct-E:"
 
@@ -495,13 +495,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Att. Utilisateur"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "ERREUR:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Remonter le fil."
 
@@ -513,17 +513,17 @@ msgid "Ejecting filament"
 msgstr "Le fil. remonte"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Butee"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Butee non atteinte"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Butees"
 
@@ -535,47 +535,47 @@ msgid "Engaging idler"
 msgstr "Engagem.t de l'idler"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extrudeur"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Infos extrudeur"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autocharg."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "Detect bour F"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "Fin de F."
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT DEJA CHARGE"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NON DECLENCHEE"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -585,7 +585,7 @@ msgstr ""
 "fonctionne."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -594,67 +594,67 @@ msgstr ""
 "vous que le filament peut bouger et que la FINDA fonctionne."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. BLOQUE"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "Action FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "CAPTEUR F. NON DECL."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "CAPTEUR F TROP TOT"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "CAPTEUR F: F. BLOQUE"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "ERREUR EXECUTION FW"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Stat. d'echec"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Stat. d'echec MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Faux declenchement"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Vitesse vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test du ventilateur"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Verif vent."
 
@@ -683,45 +683,45 @@ msgid "Feeding to nozzle"
 msgstr "Chargement vers buse"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fins filament"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Capteur Fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament extrude et avec bonne couleur?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Filament non charge"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Capteur de fil."
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -730,7 +730,7 @@ msgstr ""
 "vous que le filament peut bouger et que le capteur fonctionne."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -739,7 +739,7 @@ msgstr ""
 "vous que le filament a atteint le capteur f et que le capteur fonctionne."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -748,52 +748,52 @@ msgstr ""
 "Verifiez le tube PTFE. Verifiez que le capteur fonctionne."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Filament utilise"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Fichier incomplet. Continuer qd meme?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Mouvement final"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Cal. 1ere couche"
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "D'abord, je vais lancer le Auto-test pour verifier les problemes "
 "d'assemblage les plus communs."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flux"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Ventilo impr avant?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Avant [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Ventilos avt/gauche"
 
@@ -844,42 +844,42 @@ msgstr ""
 "mettre a jour le firmware. L'impression annulee."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "Config HW"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Chauffage/Thermistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Chauffe"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Chauffage desactivee par le compteur de securite."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Chauffe terminee."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -890,7 +890,7 @@ msgstr ""
 "calibrer le Z-axis. Apres cela, tout sera pret pour imprimer."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -899,9 +899,9 @@ msgstr ""
 "guide a travers le processus d'installation?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Haut.puiss"
 
@@ -912,39 +912,39 @@ msgid "Homing"
 msgstr "Mise a zero"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Vent. hotend:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 "Je vais maintenant lancer la calibration XYZ. Cela prendra 12 min environ."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Je vais maintenant lancer la calibration Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "RAZ IDLER IMPOSSIBLE"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "ECHEC MOUV.T IDLER"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "OUTIL INVALIDE"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -958,22 +958,22 @@ msgid "Improving bed calibration point"
 msgstr "Amelioration du point de calibration du plateau"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Ecran d'info"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. carte SD"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Inserez le filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -982,7 +982,7 @@ msgstr ""
 "appuyez sur le bouton."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -991,14 +991,14 @@ msgstr ""
 "mettre a jour le firmware. Si le probleme persiste, contactez le support."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Fil. est-il charge?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Est la plaque sur le plat. chauffant?"
 
@@ -1008,124 +1008,124 @@ msgid "Iteration"
 msgstr "Iteration"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Derniere impres."
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Echecs derniere imp."
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Gauche"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Ventilo gauche?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Gauche [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Niveau brill"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Niv. sombre"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Correction lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Ajuster Z en dir."
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Tout Charger"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Charger filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Charger vers extr."
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Charger la buse"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Charg. de la couleur"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Chargement du fil."
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Poulie lache"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Fort"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MAJ FW MMU NECESS."
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Erreur interne du firmware du MMU, veuillez reinitialiser le MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "Mode MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "LE MMU NE REPOND PAS"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "Nouvelle tentative MMU: Restauration de la temperature..."
 
@@ -1136,18 +1136,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU AUTO-TEST ECHEC"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Echecs MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "Def. charg. MMU"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1156,7 +1156,7 @@ msgstr ""
 "connecteurs. Si le probleme persiste, contactez le support."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1165,108 +1165,109 @@ msgstr ""
 "probleme persiste, contactez le support."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 connecte"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Compens. aim."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Menu principal"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Var. mesuree"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Je mesure la hauteur de reference du point de calibrage"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Mesh"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Mesh Bed Leveling"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mode"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Changement de mode en cours..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modele"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Plus de details en ligne."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Moteur"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Deplacer X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Deplacer Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Deplacer Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Deplacer l'axe"
 
@@ -1278,10 +1279,10 @@ msgstr "Deplacement select."
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "I/D"
 
@@ -1291,51 +1292,51 @@ msgid "New firmware version available:"
 msgstr "Nouvelle version de firmware disponible:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Non"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Pas de carte SD"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Pas de mouvement."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Aucun"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Non connecte"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Ne tourne pas"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
@@ -1343,25 +1344,25 @@ msgstr ""
 "surface du plateau chauffant."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Maintenant je vais prechauffer la buse pour du PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Retirez maintenant l'impression de test de la plaque en acier."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Buse"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Diam. buse"
 
@@ -1373,82 +1374,82 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Off"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront regles"
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "On"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "1 fois"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSE ERREUR THERM."
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "Calib. PID"
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "Calib. PID terminee"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "Calibration PID"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Chauffe de la PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "Calib. PINDA"
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Echec de la calibration en PINDA"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1457,7 +1458,7 @@ msgstr ""
 "dans le menu Reglages-> Calib. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "ECHEC MOUV.T POULIE"
 
@@ -1468,13 +1469,13 @@ msgid "Parking selector"
 msgstr "Parquage selecteur"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pause"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pause de l'impr."
 
@@ -1485,7 +1486,7 @@ msgid "Performing cut"
 msgstr "Coupe en cours"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1494,7 +1495,7 @@ msgstr ""
 "premiers points. Si la buse accroche le papier, eteignez vite l'imprimante."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1503,27 +1504,27 @@ msgstr ""
 "l'assistant en redemarrant l'imprimante."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "SVP, verifiez la connexion du capteur IR et decharge le filament."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Verifiez:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Nettoyez plateau chauffant en acier et appuyez sur le bouton."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Nettoyez la buse pour la calibration. Cliquez une fois fait."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
@@ -1531,7 +1532,7 @@ msgstr ""
 "pour le charger."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1540,50 +1541,50 @@ msgstr ""
 "le bouton pour le charger."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Veuillez d'abord charger un filament."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Ouvrez l'idler et retirez le filament manuellement."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Placez la plaque en acier sur le plateau chauffant."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Appuyez sur le bouton pour decharger le filament"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Retirez immediatement le filament"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Retirez d'abord les protections de transport."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Retirez la plaque en acier du plateau chauffant."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Veuillez d'abord lancer la calibration XYZ."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "SVP, dechargez le filament et reessayez."
 
@@ -1593,51 +1594,51 @@ msgid "Please upgrade."
 msgstr "Mettez a jour le FW."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Merci de patienter"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Coup.de courant"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Prechauffage"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Prechauffez la buse!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Prechauffage de la buse. Merci de patienter."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Chauffe pour couper"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Chauf. pour remonter"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Chauffe pour charger"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Chauf.pour decharger"
 
@@ -1648,48 +1649,48 @@ msgid "Preparing blade"
 msgstr "Preparation lame"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "App. sur sur bouton"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Appuyez sur le bouton pour prechauffer la buse et continuer."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Impression annulee"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Vent. impr:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Impr. depuis la SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Impression en pause"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Temps d'impression"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Adr.IP imprimante:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1714,7 +1715,7 @@ msgstr ""
 "Code. Merci de verifier le parametre dans les reglages. Impression annulee."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Le moteur de la poulie s'est bloque. Assurez-vous que la poulie peut bouger "
@@ -1727,38 +1728,38 @@ msgid "Pushing filament"
 msgstr "Chargement filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "FILE PLEINE"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "Port RPi"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Arriere [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Recup. impression"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Renommer"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1767,29 +1768,29 @@ msgstr ""
 "dans le G-code un index d'outil hors plage (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reinitialiser"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reini MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reinit. calib. XYZ"
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Reprise impression"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Reprise de l'impr."
 
@@ -1800,7 +1801,7 @@ msgid "Retract from FINDA"
 msgstr "Rétraction de FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Ref."
 
@@ -1811,17 +1812,17 @@ msgid "Returning selector"
 msgstr "Retournement select."
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Droite"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Droite [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1830,40 +1831,39 @@ msgstr ""
 "commencera du debut. Continuer?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "Carte SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "ECHEC RAZ SELECTEUR"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "ECHEC MOUV.T SELECT."
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "ARRETE."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Recherche point calibration du plateau"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Selectionner"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1872,32 +1872,32 @@ msgstr ""
 "selectionnez-le depuis le menu a l'ecran."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Choisir extrudeur:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Choix du filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Choisir langue"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Selectionnez la temperature de prechauffage de la buse qui correspond a "
 "votre materiau."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Selectionnez la temperature qui correspond a votre materiau."
 
@@ -1908,62 +1908,62 @@ msgid "Selecting fil. slot"
 msgstr "Sélection du fil."
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Auto-test OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Debut auto-test"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Auto-test"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Erreur auto-test!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Echec de l'auto-test"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Le Selftest sera lance pour calibrer la remise a zero precise sans capteur"
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Info capteur"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Capteur verifie, retirez le filament maintenant."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Regler temp.:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Reglages"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Deviat.sev."
 
@@ -1974,7 +1974,7 @@ msgid "Sheet"
 msgstr "Plaque"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1987,18 +1987,18 @@ msgstr ""
 "%cReinitialiser"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Afficher butees"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Furtif"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Deviat.leg."
 
@@ -2011,13 +2011,13 @@ msgstr ""
 "Certains fichiers ne seront pas tries. Max 100 fichiers tries par dossier."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Probleme rencontre, cliquez sur le bouton pour niveller l'axe Z..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Tri"
 
@@ -2028,71 +2028,71 @@ msgid "Sorting files"
 msgstr "Tri des fichiers"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Son"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Vitesse"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Tourne"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Une temperature ambiante stable de 21-26C et un support stable sont requis."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistiques"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Furtif"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Plaques en acier"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Arreter impression"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Stricte"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Support"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Echange"
 
@@ -2101,63 +2101,53 @@ msgstr "Echange"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIE THERMIQUE"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "Echec regl. auto MT"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "ERREUR DU DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "REINIT DU DRIVER TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "CC DU DRIVER TMC"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERR SURCHAUFFE TMC"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ERR SOUS TENSION TMC"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Regl. auto mod temp."
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperature"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperatures"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Test du filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2165,7 +2155,7 @@ msgstr ""
 "que ce soit qui bloque son mouvement."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2174,7 +2164,7 @@ msgstr ""
 "l'imprimante. Assurez-vous que le firmware du MMU est à jour."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2182,7 +2172,7 @@ msgstr ""
 "quoi que ce soit qui bloque son mouvement."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2193,7 +2183,7 @@ msgstr ""
 "(chapitre Calibration)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2202,49 +2192,49 @@ msgstr ""
 "chapitre Premiers pas, section Processus de calibration."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Heure"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Delai ecoule"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Totale"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Total des echecs"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filament total"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Temps total impr."
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Regler"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "DECHARGER MANUEL.T"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2253,20 +2243,20 @@ msgstr ""
 "FINDA, que le selecteur est libre, et la connexion de la FINDA."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Dech."
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Decharger fil."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Dechargement fil."
 
@@ -2283,23 +2273,23 @@ msgid "Unloading to pulley"
 msgstr "Dechar.t vers poulie"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Verification en echec, retirez le filament et reessayez."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Tensions"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "ATT TMC TROP CHAUD"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2312,101 +2302,95 @@ msgstr ""
 "mode furtif"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Attente utilisateur."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Attente du refroidissement de la sonde PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Attente du refroidissement des buse et plateau chauffant"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Avert"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Attention: Types d'imprimante et de carte mere modifies"
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Attention: Type de carte mere modifie."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Attention: Type d'imprimante modifie"
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Dechargement du filament reussi?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Erreur de cablage"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Assistant"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Correct-X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "Init XFLASH"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "Details calib. XYZ"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "Calibration XYZ OK. L'ecart sera corrige automatiquement."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 "Calibration XYZ OK. Les axes X/Y sont legerement non perpendiculaires. Bon "
 "boulot!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 "Calibration XYZ compromise. Les points de calibration en avant ne sont pas "
 "atteignables."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
@@ -2414,107 +2398,109 @@ msgstr ""
 "atteignable."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 "Echec calibration XYZ. Le point de calibration du plateau n'a pas ete trouve."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 "Echec calibration XYZ. Les points de calibration en avant ne sont pas "
 "atteignables."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Echec calibration XYZ. Consultez le manuel."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "Echec calibration XYZ. Le point de calibration avant droit n'est pas "
 "atteignable."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Calibration XYZ OK. Les axes X/Y sont perpendiculaires. Felicitations!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Distance Y du min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Correct-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Oui"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Vous pouvez toujours relancer l'Assistant dans Calibration > Assistant."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Correct-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Mesurer x-fois"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "Offset point [0;0]"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "et appuyez sur le bouton"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "pour charger le fil."
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "pour decharger fil."
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "inconnu"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "Etat inconnu"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Rafraichir"
 
@@ -2585,3 +2571,9 @@ msgstr "🔃Rafraichir"
 
 #~ msgid "Runouts"
 #~ msgstr "Fins"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "Echec regl. auto MT"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Regl. auto mod temp."

lang/po/Firmware_hr.po

@@ -16,94 +16,94 @@ msgstr ""
 "X-Poedit-SourceCharset: UTF-8\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 ili stariji"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 ili noviji"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s level ocekivan"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Otkazati"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Podesavanje Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Sve je u redu"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Sve je gotovo. Sretno printanje!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Abeceda"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Uvijek"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Ambijent"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Jesu lijevi i desni Z~nosaci podignuti?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Pomoc"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Pocetna tocka"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Auto napaj"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autopunj filamenta"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr "Auto punjenje fil. je aktivno, pritisnite gumb i umetnite fil.."
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr "Sprecavanje mljevenj"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Os"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Duljina osi"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Natrag"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Podloga"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Podloga se zagrijava"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Podloga zagrijana"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Podloga ispravna"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -170,55 +170,55 @@ msgstr ""
 "mlaznici? Ceka se resetiranje."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Grijac/Podloga"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Status remena"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Testiranje remena"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Doslo je do gasenja. Oporaviti print?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Svijet"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Svjetlina"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "KOM. GRESKA"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibrirajte XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibrirajte Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -227,13 +227,13 @@ msgstr ""
 "Kliknite kada je zavrseno."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibriracija Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -242,142 +242,142 @@ msgstr ""
 "Kliknite kada je zavrseno."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibracija nultocke"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibriranje"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibracija gotova"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Ne mogu pomaknuti Odabirac ili Klizac."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "Nije moguce izvrsiti radnju, filament je već napunjen. Prvo ga isprazni."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Kartica je uklonjena"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Promjeni SD karti."
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Promijeni filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Promijena uspjesna!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Ispravno izmjenjeno?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Provjera X osi"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Provjera Y osi"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Provjera Z osi"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Provjera podloge"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Provjera granicnika"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Provjera datoteke"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Provjera hotenda"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Provjera senzora"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Provjere"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Boja nije ispravna"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Napravilo zajedno"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Nast."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Ohladi"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Kopirati odabrani jezik?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Udar"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Udar detekti."
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Udar otkriven."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -395,34 +395,34 @@ msgid ""
 msgstr "Detekcija udarca moze biti ukljuceno samo u Normalnom nacinu rada"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Odrezite fil."
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Rezac"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Tamno"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Onemoguci"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Onemoguci stepere"
 
@@ -434,7 +434,7 @@ msgid "Disengaging idler"
 msgstr "Iskl. kliznika"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -446,7 +446,7 @@ msgstr ""
 "prvog sloja."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -454,13 +454,13 @@ msgstr ""
 "Zelite li ponoviti zadnji korak za ponovno podesavanje udaljenosti izmedu "
 "mlaznice i grijace podloge?"
 
-#. MSG_BTN_CONTINUE c=5
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#. MSG_BTN_CONTINUE c=8
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Gotov"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-ispravan:"
 
@@ -489,13 +489,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Cekam korisnika"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "POGRESKA:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Izbaci filament"
 
@@ -507,17 +507,17 @@ msgid "Ejecting filament"
 msgstr "Izbacivanje fil."
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Granicnik"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Granicnik nije aktiv"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Granicnici"
 
@@ -529,47 +529,47 @@ msgid "Engaging idler"
 msgstr "Angaziranje klizaca"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Ekstruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Info o ekstruderu"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. auto.punj"
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F. zastopan"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "F. isteko"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT VEC NAPUNJ."
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA SE NIJE AKT."
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -578,7 +578,7 @@ msgstr ""
 "ručno. Provjerite može li se filament pomicati i FINDA radi."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -587,67 +587,67 @@ msgstr ""
 "filament pomicati i FINDA radi."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. ZAPEO"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS Akcija"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENZOR NIJE  AKTIV."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENZOR PRERANO"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENZOR FIL. ZAPEO"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW GRESKA IZVRSENJA"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Neuspjesna stat"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Neuspjes. MMU stat"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Lazno aktiviranje"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Brzina vent"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test ventilatora"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Provjera vent"
 
@@ -676,45 +676,45 @@ msgid "Feeding to nozzle"
 msgstr "Dovod do mlaznice"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Bez filmaneta"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. senzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Ekstrudiranje fil.s sa ispravnom bojom?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. nije napunjen"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Senzor filamenta"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -723,7 +723,7 @@ msgstr ""
 "se filament moze pomaknuti i da senzor radi"
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -732,7 +732,7 @@ msgstr ""
 "je filament dosegao fsenzor i da senzor radi."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -741,52 +741,52 @@ msgstr ""
 "li je nešto zapelo u PTFE cijevi. Ocitava li senzor ispravno."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Iskoristeni fil."
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Datoteka je nepotpuna. Svejedno nastaviti?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Zavrsni pokreti"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Prvi sloj kalib."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Prvo cu pokrenuti samotestiranje kako bih provjerio najcesce probleme sa "
 "montazom."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Protok"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Prednji print vent?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Prednj str[μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Prednji/lijevi vent"
 
@@ -835,42 +835,42 @@ msgstr ""
 "otkazan."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gkod"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW podesavanje"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Grijac/Termostat"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Grijanje"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Grijanje je onemoguceno sigurnosnim mjeracem vremena."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Grijanje obavljeno."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -881,7 +881,7 @@ msgstr ""
 "printanje."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -890,9 +890,9 @@ msgstr ""
 "postupak postavljanja?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Visoka sna"
 
@@ -903,38 +903,38 @@ msgid "Homing"
 msgstr "Navodjenje"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend vent:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Sada cu pokrenuti xyz kalibraciju. Trebat ce cca. 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Sada cu pokrenuti z kalibraciju."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "KLIZAC NIJE PODESEN"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "KLIZAC NIJE POMAKNUT"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "NEVALJAN ALAT"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -948,22 +948,22 @@ msgid "Improving bed calibration point"
 msgstr "Poboljšanje točke kalibracije podloge"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Info zaslon"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Obrada SD kartice"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Umetnite filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -971,7 +971,7 @@ msgstr ""
 "Umetnite filament (nemojte ga puniti) u ekstruder i zatim pritisnite gumb."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -980,14 +980,14 @@ msgstr ""
 "azurirati firmware. Ako se problem nastavi, obratite se podrsci."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Je li filament napunjen?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Je li celicna ploca na grijanoj podlozi?"
 
@@ -997,124 +997,124 @@ msgid "Iteration"
 msgstr "Ponavljanje"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Zadnji print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Zadnji neusp. print"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Lijevo"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Lijevi hotend vent?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Lijeva str[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Razina svjet"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Razina zatam"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Lin. ispravak"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Live podesavanje Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Puni sve"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Napunite filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Puni u ekstruder"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Punjenje u mlazn"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Ucitavanje boje"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Punjenje filamenta"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Labava remenica"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Glasno"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "POTREBNO AZURIRANJE"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Interna pogreska firmware MMU-a, resetirajte MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU Mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NE ODGOVARA"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Ponovni pokusaj: Vracanje temperature..."
 
@@ -1125,18 +1125,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST N USPIO"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "MMU ne uspijeva"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "Neusp. MMU punj"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1145,7 +1145,7 @@ msgstr ""
 "problem nastavi, obratite se podrsci."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1154,108 +1154,109 @@ msgstr ""
 "nastavi, obratite se podrsci."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 spojen"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Magnet. komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Nazad"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Mjereni nagib"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Mjerenje referentne visine kalibracijske tocke"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Mreza"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Izrav. mrez. podl"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mod"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Promjena moda u tijeku..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Vise detalja online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Pomaknite X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Pomaknite Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Pomaknite Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Pomaknite os"
 
@@ -1267,10 +1268,10 @@ msgstr "Pomicanje odabiraca"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/A"
 
@@ -1280,51 +1281,51 @@ msgid "New firmware version available:"
 msgstr "Dostupna nova verzija firmwera:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Ne"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Nema SD kartice"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Bez pomaka."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Nema"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nije povezano"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Ne okrece se"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
@@ -1332,25 +1333,25 @@ msgstr ""
 "podloge."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Sada cu zagrijati mlaznicu za PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Sada uklonite probni print sa celicne ploce."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Mlaznica"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Mlaznica."
 
@@ -1362,81 +1363,81 @@ msgstr "Ok"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Off"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Pronadene stare postavke. Postavit ce se zadani PID, Esteps itd."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "On"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Jednom"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUZIRAN TERMAL EROR"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kal."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kal. zavrsena"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibracija"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "PINDA se Zagrijava"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Kalibracija PINDA nije uspjela"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1445,7 +1446,7 @@ msgstr ""
 "Postavke->PINDA. kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "REMENICA SE NE MICE"
 
@@ -1456,13 +1457,13 @@ msgid "Parking selector"
 msgstr "Selektor parkiranja"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pauzirajte print"
 
@@ -1473,7 +1474,7 @@ msgid "Performing cut"
 msgstr "Izvodjenje reza"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1482,7 +1483,7 @@ msgstr ""
 "mlaznica uhvati papir, odmah iskljucite printer."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1491,33 +1492,33 @@ msgstr ""
 "ponovnim pokretanjem printera."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Provjerite IR prikljucak senzora, izvadite filament ako postoji."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Molimo provjerite:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Ocistite grijacu podlogu, a zatim pritisnite gumb."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Molimo ocistite mlaznicu radi kalibracije. Kliknite kada ste gotovi."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr "Umetnite filament u ekstruder, a zatim pritisnite gumb za punjenje."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1525,50 +1526,50 @@ msgstr ""
 "Umetnite filament u prvu cijev MMU-a, a zatim pritisnite gumb za punjenje."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Molimo prvo ubacite filament."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Molimo otvorite klizac i rucno uklonite filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Stavite celicnu plocu na grijacu podlogu."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Pritisnite gumb za praznjenje filamenta"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Molimo odmah izvucite filament"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Najprije uklonite prijevozne osloce."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Molimo uklonite celicnu plocu sa grijace podloge."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Prvo pokrenite XYZ kalibraciju."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Prvo izvadite filament, a zatim ponovite ovu radnju."
 
@@ -1578,51 +1579,51 @@ msgid "Please upgrade."
 msgstr "Molimo nadogradite."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Molimo pricekajte"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Prekidi struje"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Predgrijavanje"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Predgr. mlaznicu!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Predgrijavanje mlaznice. Molim vas pricekajte."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Predgr. za rezanje"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Predgr. za izbaci."
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Predgr. za punjenje"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Predgr. za praznj."
 
@@ -1633,48 +1634,48 @@ msgid "Preparing blade"
 msgstr "Priprema ostrice"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Pritisnite gumb"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pritisnite gumb za predgrijavanje mlaznice i nastavite."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Print je prekinut"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Vent printa:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Printaj sa SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Print pauziran"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Vrijeme printanja"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Printer IP Adr:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1697,7 +1698,7 @@ msgstr ""
 "vrijednost u postavkama. Print je otkazan."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Motor remenice zastao. Provjerite moze li se remenica pomicati i provjerite "
@@ -1710,39 +1711,39 @@ msgid "Pushing filament"
 msgstr "Guranje filamenta"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "RED PUN"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi utor"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Zad. str.[μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Oporavak printa"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Uklonite stari filament i pritisnite gumb za pocetak stavljanja novog "
 "filamenta."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Preimenuj"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1751,29 +1752,29 @@ msgstr ""
 "za indeks alata izvan raspona (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Resetiraj"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Nastavite print"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Nastavak printa"
 
@@ -1783,8 +1784,8 @@ msgstr "Nastavak printa"
 msgid "Retract from FINDA"
 msgstr "Izvuci iz FINDA"
 
-#. MSG_BTN_RETRY c=5
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#. MSG_BTN_RETRY c=8
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Retry"
 
@@ -1795,17 +1796,17 @@ msgid "Returning selector"
 msgstr "Povratak izbornika"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Tocno"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Desna str.[μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1814,40 +1815,39 @@ msgstr ""
 "ispocetka. Nastavite?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD karti"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "IZBORNIK NE PODESEN"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "IZBORNIK SE NE MICE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "ZAUSTAVLJENO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Trazenje tocke kalibracije podloge"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Odaberi"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1856,31 +1856,31 @@ msgstr ""
 "zaslonu."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Odaberite ekstruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Odaberi filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Izaberi jezik"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Odaberite temperaturu predgrijavanja mlaznice koja odgovara vasem materijalu."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Odaberite temperaturu koja odgovara vasem materijalu."
 
@@ -1891,63 +1891,63 @@ msgid "Selecting fil. slot"
 msgstr "Odabir fil. utora"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Samotestiranje OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Pocetak selftesta"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Selftest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Selftest error!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Selftest nije uspio"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Provest ce se selftest radi kalibracije preciznog ponovnog postavljanja bez "
 "senzora."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Info senzora"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Senzor je provjeren, odmah uklonite filament."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Postavi temperaturu:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Postavke"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Veliki nagib"
 
@@ -1958,7 +1958,7 @@ msgid "Sheet"
 msgstr "Ploca"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1971,18 +1971,18 @@ msgstr ""
 "%cResetiraj"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Pokazi granicnike"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Tih"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Lagani nagib"
 
@@ -1996,13 +1996,13 @@ msgstr ""
 "je 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Naisao je neki problem, nametnuto Z-niveliranje..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Vrsta"
 
@@ -2013,71 +2013,71 @@ msgid "Sorting files"
 msgstr "Sortiranje datoteka"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Zvuk"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Brzina"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Okrece se"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Potrebna je stabilna temperatura okoline 21-26C, potrebno je cvrsto postolje."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Tiho"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Celicna ploca"
 
-#. MSG_BTN_STOP c=5
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#. MSG_BTN_STOP c=8
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Zaustavi print"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Strogo"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Podrska"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Zamjenjeno"
 
@@ -2086,63 +2086,53 @@ msgstr "Zamjenjeno"
 msgid "THERMAL ANOMALY"
 msgstr "TERMALNA ANOMALIJA"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM autotune nije usp"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC GRESKA DRAJVERA"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC RESET DRAJVERA"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRAJVER SKRACEN"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC GRESKA PREGRIJAN"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC NISKA VOLTAZA"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Temp. autptune model"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatura"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperature"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Testiram filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2150,7 +2140,7 @@ msgstr ""
 "njegovo kretanje."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2159,7 +2149,7 @@ msgstr ""
 "printera. Provjerite je li MMU firmware azuriran."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2167,7 +2157,7 @@ msgstr ""
 "sprjecava njegovo kretanje."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2177,7 +2167,7 @@ msgstr ""
 "optimalnu visinu. Provjerite slike u prirucniku (poglavlje Kalibracija)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2186,49 +2176,49 @@ msgstr ""
 "poglavlje Prvi koraci, odjeljak Tijek kalibracije."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Vrijeme"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Pauza"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Ukupno"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Totalne pogreske"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Totalno filamenta"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Vrijeme printanja"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Ugodi"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "ISPRAZNI RUCNO"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2236,21 +2226,21 @@ msgstr ""
 "Neocekivano FINDA citanje. Uvjerite se da nijedan filament nije ispod FINDA "
 "i da je birac slobodan. Provjerite FINDA vezu."
 
-#. MSG_BTN_UNLOAD c=6
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#. MSG_BTN_UNLOAD c=8
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Prazni"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Ispraznite fil."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Praznjenje filamenta"
 
@@ -2267,23 +2257,23 @@ msgid "Unloading to pulley"
 msgstr "PRAZNJ DO REMENICE"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Provjera nije uspjela, uklonite filament i pokusajte ponovno."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Voltaza"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "UPOZORENJE TMC VRUC"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2295,204 +2285,198 @@ msgstr ""
 "u tihom modu"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Ceka se korisnik..."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Ceka se hladenje PINDA sonde"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Ceka se hladjenje mlaznice i podloge"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Upozore"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Upozorenje: promijenjeni su i tip printera i tip maticne ploce."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Upozorenje: tip maticne ploce je promijenjen."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Upozorenje: promijenjena je vrsta printera."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Je li praznjenje fil. bilo uspjesno?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Greska u ozicenju"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Carobnjak"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "X-ispravan:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH  validacija"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ detalji kal"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "XYZ kalibracija u redu. Iskrivljenost ce se automatski ispraviti."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "XYZ kalibracija je u redu. Osi X/Y su malo nagnute. Bravo!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 "XYZ kalibracija je ugrozena. Prednje kalibracijske tocke nisu dostupne."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-"XYZ kalibracija je ugrozena. Lijeva prednja tocka kalibracije nije dostupna."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 "XYZ kalibracija je ugrozena. Desna prednja tocka kalibracije nije dostupna."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 "XYZ kalibracija nije uspjela. Tocka kalibracije podloga nije pronadena."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 "XYZ kalibracija nije uspjela. Prednje kalibracijske tocke nisu dostupne."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-"XYZ kalibracija nije uspjela. Lijeva prednja tocka kalibracije nije dostupna."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ kalibracija nije uspjela. Molimo pogledajte prirucnik."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "XYZ kalibracija nije uspjela. Desna prednja tocka kalibracije nije dostupna."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "XYZ kalibracija u redu. Osi X/Y su okomite. Cestitamo!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y distanca od min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Y-ispravan:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Da"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Carobnjak uvijek mozete nastaviti iz Kalibracija -> Carobnjak."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Z-ispravan:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z-sonda br."
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] razmak tocke"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "i pritisnite gumb"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "da napuni filament"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "da isprazni filament"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "nepoznato"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "nepoznato stanje"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Osvjeziti"
 
@@ -2564,3 +2548,20 @@ msgstr "🔃Osvjeziti"
 
 #~ msgid "Runouts"
 #~ msgstr "Nestalo"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "TM autotune nije usp"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Temp. autptune model"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "XYZ kalibracija je ugrozena. Lijeva prednja tocka kalibracije nije "
+#~ "dostupna."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "XYZ kalibracija nije uspjela. Lijeva prednja tocka kalibracije nije "
+#~ "dostupna."

lang/po/Firmware_hu.po

@@ -16,94 +16,94 @@ msgstr ""
 "X-Poedit-SourceCharset: UTF-8\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 vagy regebbi"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 v. ujabb"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "Vart szint: %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Megsem"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Z allitasa:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Minden rendben"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Keszen vagyunk. Jo nyomtatast!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Abece"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Mindig"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Kornyezet"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "A Z tengely a felso vegponton van?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Seged"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Autom."
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto homeolas"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Auto ero"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Fil. auto.betolt."
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr "Autom. betoltes be, nyomd meg a gombot es helyzed be a filamentet."
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr "Daralas megelozese"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Tengely"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Tengely hossz"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Vissza"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Asztal"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Asztal futes"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Asztal kesz"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Szint. korrekcio"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -170,55 +170,55 @@ msgstr ""
 "az ujrainditast."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Asztal/Fej futes"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Szij allapot"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Szij teszt"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Aramkieses volt, nyomt. folytatasa?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Fenyes"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Fenyero"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "KOMUNIKACIOS HIBA"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "XYZ kalibracio"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Z kalibracio"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -227,13 +227,13 @@ msgstr ""
 "nem er, majd nyomd meg ha keszen vagy."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Z kalibralasa"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -242,142 +242,142 @@ msgstr ""
 "er, majd nyomd meg ha keszen vagy."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Home poz. kalibralas"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibracio"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibracio kesz"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Nem tudom mozgatni a Fejet vagy a Gorgot"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "A muvelet nem hajthato vegre, a filament mar be van toltve. Vedd ki elobb."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Kartya eltavolitva"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Cserelj SD kartyat"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Filament csere"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Csere sikerult!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Sikerult a csere?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "X tengely ellenorzes"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Y tengely ellenorzes"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Z tengely ellenorzes"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Asztal ellenorzese"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Vegallaskapcs. ellen"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Fajl ellenorzese"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Hotend ellenorzese"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Szenz. ellenorzese"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Ellenorzesek"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Szin nem jo"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Kozossegi"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Folyt"
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Lehutes"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Kivalasztott nyelv masolasa?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Utkozes"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Utkozes erz."
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Utkozes erzekelve."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -398,34 +398,34 @@ msgstr ""
 "kapcsolhato be"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Filament vagasa"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Vago"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Sotet"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Letilt"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Motorok kikapcsol."
 
@@ -437,7 +437,7 @@ msgid "Disengaging idler"
 msgstr "Gorgo levalasztasa"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -449,7 +449,7 @@ msgstr ""
 "bekezdest."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -457,13 +457,13 @@ msgstr ""
 "Meg szeretned ismetelni az utolso lepest, hogy finomhangold a fuvoka es az "
 "asztal kozotti tavolsagot?"
 
-#. MSG_BTN_CONTINUE c=5
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#. MSG_BTN_CONTINUE c=8
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Kesz"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-korrekcio:"
 
@@ -492,13 +492,13 @@ msgid "ERR Wait for User"
 msgstr "Felh. varakozas HIBA"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "HIBA:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Filament kiadasa"
 
@@ -510,17 +510,17 @@ msgid "Ejecting filament"
 msgstr "Filament kiadasa"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Vegallaskapcsolo"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Vegallask. nem kapcs"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Vegallaskapcsolok"
 
@@ -532,47 +532,47 @@ msgid "Engaging idler"
 msgstr "Gorgo becsatolasa"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Extruder info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autobetolt"
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "Dugul. eszlel"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "F. fogyas"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT MAR BENT"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NEM KAPCSOLT"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -581,7 +581,7 @@ msgstr ""
 "fil. utjat es a FINDA mukodeset."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -590,67 +590,67 @@ msgstr ""
 "FINDA mukodeset."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FIL. SZORULT"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FSz akcio"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSZENZOR NEM KAPCSOL"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSZENZ. TUL HAMAR"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSZENZOR: F SZORULT"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW FUTAS HIBA"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Hiba statisztika"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "MMU hiba stat."
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Hamis kivalto ok"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Vent. sebesseg"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Ventillator teszt"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Vent.proba"
 
@@ -679,45 +679,45 @@ msgid "Feeding to nozzle"
 msgstr "Fuvokahoz toltes"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fil. kifutasok"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. szenzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament es a szine rendben?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. nincs betoltve"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Filament szenzor"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -726,7 +726,7 @@ msgstr ""
 "filament utjat es a szenort."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -735,7 +735,7 @@ msgstr ""
 "filament utjat es a szenort."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -744,52 +744,52 @@ msgstr ""
 "Ellenorizd a PTFE csovet es a szenzort."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Felhasznalt filam."
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "A fajl vege hianyzik. Folytatod igy is?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Mozdulat befejezese"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Elso reteg kal."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Elsokent lefuttatom az onellenorzest, hogy megnezzem a leggyakoribb "
 "osszeszerelesi problemakat."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flow"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Elso targyhuto vent?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Elulso old[μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Elso/bal ventillator"
 
@@ -838,42 +838,42 @@ msgstr ""
 "Nyomtatas megallitva."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW beallitas"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Futotest/Termisztor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Futes folyamatban"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "A bizonsagi idozito leallitotta a futest"
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Futes kesz."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -884,7 +884,7 @@ msgstr ""
 "nyomtathatsz is."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -893,9 +893,9 @@ msgstr ""
 "a beallitasi folyamaton?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Magas ero"
 
@@ -906,38 +906,38 @@ msgid "Homing"
 msgstr "Homeolas"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend vent.:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Lefuttatom az XYZ kalibraciot. Ez kb. 12 percet vesz igenybe."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Lefuttatom a Z kalibraciot."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "GORGO NEM MOZOG"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "GORGO NEM MOZOG"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "HELYTELEN SZERSZAM"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -951,22 +951,22 @@ msgid "Improving bed calibration point"
 msgstr "Bed kalibracio pontositasa"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Info kepernyo"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "SD kartya inic."
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Helyezd be a filam."
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -975,7 +975,7 @@ msgstr ""
 "gombot."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -984,14 +984,14 @@ msgstr ""
 "problema fennall, fordulj a supporthoz."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Filament behelyezve?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Rajta van az acellap a targyasztalon?"
 
@@ -1001,124 +1001,124 @@ msgid "Iteration"
 msgstr "Iteracio"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Utolso nyomtatas"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Utolso nyomt. hibak"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Bal"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Bal hotend vent.?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Bal [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Fenyes szint"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Sotet szint"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Lin. korrekcio"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Z magassag beall."
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Ossz.bet"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Filament betolt."
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Extruderbe toltes"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Betolt. fuvokahoz"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Szin tisztitasa"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Filament betoltese"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Laza szijtarcsa"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Hangos"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW FRISSIT. KELL"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware hiba, kerlek inditsd ujra az MMU-t"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU Mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NEM VALASZOL"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Ujra: Homerseklet visszaallitasa"
 
@@ -1129,18 +1129,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELFTEST HIBA"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "MMU hibak"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU bet. hibak"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1149,7 +1149,7 @@ msgstr ""
 "problema fennall, keresd a supportot."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1158,108 +1158,109 @@ msgstr ""
 "fennall, keresd a supportot."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 csatlakozott"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Magnes komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Fomenu"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Meroleg. hiba"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Kalibracios pont magassaganak merese"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Halo"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Asztal szintezes"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mod"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Modvaltas folyamatban..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Tovabbi reszletek a neten."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "X mozgatasa"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Y mozgatasa"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Z mozgatasa"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Tengely mozgatasa"
 
@@ -1271,10 +1272,10 @@ msgstr "Szelektor mozgatasa"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/A"
 
@@ -1284,76 +1285,76 @@ msgid "New firmware version available:"
 msgstr "Uj firmver verzio erheto el:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nem"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Nincs SD kartya"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Nincs mozgas."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Nincs"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nincs csatlakoztatva"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Nem forog"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 "Most beallitjuk a fuvoka hegye es a targyasztal felulete kozotti tavolsagot."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Felfutom a fuvokat PLA-hoz."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Vedd le a tesztnyomatot az acellaprol."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Fuvoka"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Fuv. atm."
 
@@ -1365,88 +1366,88 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Ki"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Regi beallitasokat talaltam. Az alap PID, Esteps, stb. lesz beallitva."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "Be"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Egyszer"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "SZUNET HOMERSEK.HIBA"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kalibracio"
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kal. kesz"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibracio"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "PINDA Futes"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "PINDA kalibracio sikertelen."
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr "PINDA kalibracio sikeres es aktiv. A Beallitasok ->PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "GORGO NEM MOZOG"
 
@@ -1457,13 +1458,13 @@ msgid "Parking selector"
 msgstr "Szelektor parkolasa"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Szun."
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Nyomtatas szunet"
 
@@ -1474,7 +1475,7 @@ msgid "Performing cut"
 msgstr "Filament vagas"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1483,7 +1484,7 @@ msgstr ""
 "fuvoka hozzaer a papirlaphoz, azonnal kapcsold ki a nyomtatot."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1492,29 +1493,29 @@ msgstr ""
 "folytathatod az uzembe helyezest a nyomtato ujrainditasaval."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Nezd meg az IR szenzor csatlakoz., vedd ki a filam., ha bent van."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Kerlek ellenorizd:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Kerlek, tisztisd le a targyasztalt, majd nyomd meg a gombot."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Kerlek, tisztisd meg a fuvokat kalibracio elott. Nyomd meg a gombot, ha "
 "keszen vagy."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
@@ -1522,7 +1523,7 @@ msgstr ""
 "betolteshez."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1531,51 +1532,51 @@ msgstr ""
 "a betolteshez."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Kerlek eloszor toltsd be a filamentet."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 "Kerlek, nyisd ki a nyomogorgo ajtajat, es tavolitsd el a filamentet kezzel."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Kerlek, helyzed az acellapot a targyasztalra."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Kerlek, nyomd meg a gombot a filament kiadasahoz"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Kerlek, huzd ki a filamentet most"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Tavolitsd el a szallitasi segedanyagokat."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Kerlek, tavolisd el az acellapot az asztalrol."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Kerlek, elobb futtasd le az XYZ kalibraciot."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Kerlek eloszor vedd ki a filamentet, majd probalkozz ujra."
 
@@ -1585,51 +1586,51 @@ msgid "Please upgrade."
 msgstr "Kerlek frissits."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Kerlek varj"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Aramkimaradasok"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Elofutes"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Futsd fel a fuvokat!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Fuvoka futese folyamatban. Kerlek, varj."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Melegites vagashoz"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Melegites kiadashoz"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Felfutes betolteshez"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Felfutes kiadashoz"
 
@@ -1640,48 +1641,48 @@ msgid "Preparing blade"
 msgstr "Penge elokeszites"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Nyomd meg a gombot"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Nyomd meg a gombot a folytatashoz es a fuvoka felfutesehez."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Nyomt. megszakitva"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Targyhuto:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Nyomtatas SD-rol"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Nyomt. szuneteltetve"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Nyomtatasi ido"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Nyomtato IP cime:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1704,7 +1705,7 @@ msgstr ""
 "beallitasokban. Nyomtatas megallitva."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr "Gorgo motor nem mozog. Ellenorizd hogy tud-e mozogni es a kabelezest."
 
@@ -1715,39 +1716,39 @@ msgid "Pushing filament"
 msgstr "Filament benyomasa"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "SOR TELE"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Hatso old.[μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Nyomt. visszaallit"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Vedd ki a regi filamentet, majd nyomd meg a gombot az uj filament "
 "betoltesehez."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Atnevezes"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1756,29 +1757,29 @@ msgstr ""
 "kivuli ertekeket a G kodban."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Ujrainditas"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "MMUreszet"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "XYZ kal. nullazas"
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Nyomt. folytatasa"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Nyomtatas folytatasa"
 
@@ -1788,8 +1789,8 @@ msgstr "Nyomtatas folytatasa"
 msgid "Retract from FINDA"
 msgstr "FINDAtol visszahuz"
 
-#. MSG_BTN_RETRY c=5
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#. MSG_BTN_RETRY c=8
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Ujra"
 
@@ -1800,17 +1801,17 @@ msgid "Returning selector"
 msgstr "Szelektor vissza"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Jobb"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Jobb old.[μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1819,72 +1820,71 @@ msgstr ""
 "fog mindent kezdeni. Folytatod?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SDkartya"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SZELEKTOR NEM HOMEOL"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SZELEKTOR NEM MOZOG"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "MEGALLITVA."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Kalibracios pont keresese az asztalon"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Kivalasztas"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr "Valassz egy filamentet az elso reteg kalibraciojahoz a menubol."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Extruder valasztas:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Valassz filamentet:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Valassz nyelvet"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Valaszd ki a fuvoka homersekletet, amelyik megfelel az altalad hasznalt "
 "anyaghoz ajanlott homersekletnek."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Valassz homersekletet, ami megfelel a filamenthez."
 
@@ -1895,62 +1895,62 @@ msgid "Selecting fil. slot"
 msgstr "Fil.poz.kivalasztasa"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Ondiagnosztika OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Ondiagnosztika indul"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Ondiagnosztika"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Ondiagnosztika hiba!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Ondiag. sikertelen"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "A pontos szenzor nelkuli homing erdekeben lefuttatom az ondiagnosztikat."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Szenzor info"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Szenzor OK, vedd ki a filamentet most."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Homerseklet beall.:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Beallitasok"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "NagyMerol.hiba"
 
@@ -1961,7 +1961,7 @@ msgid "Sheet"
 msgstr "Acellap"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1974,18 +1974,18 @@ msgstr ""
 "%cUjrainditas"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Vegallaskapcsolok"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Halk"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Kis merol.hiba"
 
@@ -1999,13 +1999,13 @@ msgstr ""
 "konyvtaron belul."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Hiba tortent, Z szintezes indul..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Rendez"
 
@@ -2016,70 +2016,70 @@ msgid "Sorting files"
 msgstr "Fajlok rendezese"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Hang"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Sebesseg"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Forog"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr "Stabil 21-26C homerseklet es egy merev allvany (asztal) szukseges."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statisztika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Halk"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Acellapok"
 
-#. MSG_BTN_STOP c=5
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#. MSG_BTN_STOP c=8
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Allj"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Nyomt. megallitasa"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Szigoru"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Tamogatas"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Felcserelve"
 
@@ -2088,63 +2088,53 @@ msgstr "Felcserelve"
 msgid "THERMAL ANOMALY"
 msgstr "Homersekl. anomalia"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "HM kalib. sikertelen"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER HIBA"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER RESZET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER ZARLAT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC TULHEVULES HIBA"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC ALACSONY FESZ."
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Homers. modell kalib"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Homerseklet"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Homersekletek"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Filament tesztelese"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2152,7 +2142,7 @@ msgstr ""
 "mozgasat."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2161,7 +2151,7 @@ msgstr ""
 "firmwaret."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2169,7 +2159,7 @@ msgstr ""
 "mozgasat."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2180,7 +2170,7 @@ msgstr ""
 "Kalibracio fejezeteben."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2189,49 +2179,49 @@ msgstr ""
 "fejezetenek Kalibracio menete bekezdeset."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Ido"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Idotullepes"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Ossz."
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Ossz. hiba"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Osszes filament"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Ossz. nyomt. ido"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Finomhangolas"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "VEDD KI KEZZEL"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2239,21 +2229,21 @@ msgstr ""
 "Varatlan FINDA ertek. Gyozodj meg rola hogy nincs a FINDA alatt filament es "
 "a szelektor ures. Nezd meg a FINDA csatlakozasat."
 
-#. MSG_BTN_UNLOAD c=6
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#. MSG_BTN_UNLOAD c=8
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Kiadas"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Filament kiadasa"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Filament kiadasa"
 
@@ -2270,23 +2260,23 @@ msgid "Unloading to pulley"
 msgstr "Kiadas a gorgohoz"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Ellenorzes sikertelen, vedd ki a filamentet es probald ujra."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Feszultsegek"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "FIGYELEM A TMC FORRO"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2299,205 +2289,201 @@ msgstr ""
 "Halk modban"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Var. a felhasznalora"
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "A PINDA szenzor kihuleset varom."
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "A fuvoka es az asztal kihuleset varom."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Figylem."
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Figyelem: a nyomtato es az alaplap tipusa is megvaltozott."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Figyelem: az alaplap tipusa megvaltozott."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Figyelem: a nyomtato tipusa megvaltozott."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Sikerult kivenni a filamentet?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Kabelezesi hiba"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Varazslo"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "X-korrekcio:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH inicializal"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ kal. reszlet"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 "XYZ kalibracio OK. Az esetleges X/Y merolegessegi hiba automatikusan "
 "korrigalva lesz."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 "XYZ kalibracio sikerult. Az X/Y tengelyeken enyhe merolegessegi hiba van."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 "Az XYZ kalibracio sikertelen. Az elulso kalibracios pontok nem erhetoek el."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr "XYZ kalibracio nem jo. Bal elso kal. pont nem elerheto."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 "Az XYZ kalibracio sikertelen. A jobb kalibracios pontok nem erhetoek el."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 "Az XYZ kalibracio sikertelen. Az asztal kalibracios pontja nem erheto el."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 "Az XYZ kalibracio sikertelen. Az elulso kalibracios pontok nem erhetoek el."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr "XYZ kalibracio sikertelen. Bal elso kal. pont nem elerheto."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ kalibracio sikertelen. Kerlek, nezz bele a kezikonyvbe."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "Az XYZ kalibracio sikertelen. A jobb kalibracios pontok nem erhetoek el."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "XYZ kalibracio OK. Az X/Y tengelyek merolegesek. Gratulalok!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y-minimum tavolsag"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Y-korrekcio:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Igen"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "A Varazsolt barmikor elered a Kalibracio -> Varazslo menubol."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Z-korrekcio:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z meres szama"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] pont offszet"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "es nyomd meg a gombot"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "filam. betoltesehez"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "filament kiadasahoz"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "ismeretlen"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "ismeretlen allapot"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Frissites"
 
@@ -2568,6 +2554,19 @@ msgstr "🔃Frissites"
 #~ msgid "Runouts"
 #~ msgstr "Kifutas"
 
+#~ msgid "TM autotune failed"
+#~ msgstr "HM kalib. sikertelen"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Homers. modell kalib"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr "XYZ kalibracio nem jo. Bal elso kal. pont nem elerheto."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr "XYZ kalibracio sikertelen. Bal elso kal. pont nem elerheto."
+
 #~ msgid ""
 #~ "You are using firmware alpha version. This is development version. Using "
 #~ "this version is not recommended and may cause printer damage."

lang/po/Firmware_it.po

@@ -28,82 +28,82 @@ msgid " 0.4 or newer"
 msgstr " 0.4 o superiore"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7018
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "atteso livello %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1967
-#: ../../Firmware/ultralcd.cpp:3789
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Annulla"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2655
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Compensaz. Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7294
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Nessun errore"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4116
-#: ../../Firmware/ultralcd.cpp:4125
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Tutto fatto. Buona stampa!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4385
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfabeti"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4270
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Sempre"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1393
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Ambiente"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2968
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "I carrelli Z sin/des sono altezza max?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4440
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Assist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5845
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3262 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4854
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Trova origine"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:5760
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Automatico"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5567
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autocaric. filam."
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr "Caricamento automatico attivo, premi la manopola e inserisci il filam."
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr "Evito triturazione"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:6997
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Assi"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:6996
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Lunghezza dell'asse"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2736
-#: ../../Firmware/ultralcd.cpp:4206 ../../Firmware/ultralcd.cpp:5842
-#: ../../Firmware/ultralcd.cpp:7806
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Indietro"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2030 ../../Firmware/Marlin_main.cpp:4793
-#: ../../Firmware/Marlin_main.cpp:4845 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1391 ../../Firmware/ultralcd.cpp:5717
-#: ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Piano"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6294 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:582
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Riscald. piano"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6332 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Piano fatto."
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Correz. liv.piano"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2210 ../../Firmware/Marlin_main.cpp:2986
-#: ../../Firmware/Marlin_main.cpp:2996
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -170,35 +170,35 @@ msgstr ""
 "reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Piano/Riscald."
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1444
-#: ../../Firmware/ultralcd.cpp:1713
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Stato cinghie"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4856
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test cinghie"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1586 ../../Firmware/Marlin_main.cpp:1608
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Blackout rilevato. Recuperare stampa?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5845
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Chiaro"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4804
-#: ../../Firmware/ultralcd.cpp:5770
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Luminosita'"
 
@@ -208,17 +208,17 @@ msgid "COMMUNICATION ERROR"
 msgstr "ERRORE COMUNICAZIONE"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4860
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Calibra XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4862
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Calibra Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2931
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -227,13 +227,13 @@ msgstr ""
 "all'altezza massima. Click per terminare."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:632
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Calibrando Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2930
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -242,17 +242,17 @@ msgstr ""
 "all'altezza massima. Click per terminare."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7296
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Calibrazione Home"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5577
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Calibrazione"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:643
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Calibr. completa"
 
@@ -269,115 +269,115 @@ msgstr ""
 "Impossibile eseguire l'azione, il filamento è già caricato. Scaricarlo prima."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7680
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "SD rimossa"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5530
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Cambia scheda SD"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5489
-#: ../../Firmware/ultralcd.cpp:5726
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Cambia filamento"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2166
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Cambio riuscito!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2214
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Cambio corretto?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6170
-#: ../../Firmware/ultralcd.cpp:7286
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Verifica asse X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6179
-#: ../../Firmware/ultralcd.cpp:7287
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Verifica asse Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7288
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Verifica asse Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7289
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Verifica piano"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7285
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Verifica finecorsa"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7384
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Verifica file"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Verifica ugello"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7292
-#: ../../Firmware/ultralcd.cpp:7293
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Controllo sensori"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4711
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Controlli"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2217
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Colore non puro"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3679
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Contribuiti"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Cont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2125
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Raffredda"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3617
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Copiare la lingua selezionata?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1234
-#: ../../Firmware/ultralcd.cpp:1263
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Impatto"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4322
-#: ../../Firmware/ultralcd.cpp:4323 ../../Firmware/ultralcd.cpp:4325
-#: ../../Firmware/ultralcd.cpp:5746 ../../Firmware/ultralcd.cpp:5748
-#: ../../Firmware/ultralcd.cpp:5752
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Rileva.crash"
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Rilevato impatto."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3521
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -398,24 +398,24 @@ msgstr ""
 "in Modalita normale"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5138
-#: ../../Firmware/ultralcd.cpp:5561
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Taglia filamento"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4265
-#: ../../Firmware/ultralcd.cpp:4270 ../../Firmware/ultralcd.cpp:4275
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Tagliatr."
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1654
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Data:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5845
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Scuro"
 
@@ -425,7 +425,7 @@ msgid "Disable"
 msgstr "Disattiva"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4747
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Disattiva motori"
 
@@ -437,7 +437,7 @@ msgid "Disengaging idler"
 msgstr "Distacco idler"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1531 ../../Firmware/Marlin_main.cpp:3401
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -449,7 +449,7 @@ msgstr ""
 "Calibrazione primo strato."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4090
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -463,7 +463,7 @@ msgid "Done"
 msgstr "Fatto"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4159
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "Correzione-E:"
 
@@ -492,13 +492,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Attendere utente"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2269
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "ERRORE:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5120
-#: ../../Firmware/ultralcd.cpp:5558
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Espelli fil."
 
@@ -510,17 +510,17 @@ msgid "Ejecting filament"
 msgstr "Espellendo filamento"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Finecorsa"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6972
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Finec. fuori portata"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6958
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Finecorsa"
 
@@ -532,32 +532,32 @@ msgid "Engaging idler"
 msgstr "Ingaggio idler"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3520 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3495
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Estrusore"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1709
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Info estrusore"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4213
-#: ../../Firmware/ultralcd.cpp:4220
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "Autocar.fil."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4215
-#: ../../Firmware/ultralcd.cpp:4222
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "Ril. blocco"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4212
-#: ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "Ril. fine fil"
 
@@ -595,8 +595,8 @@ msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. BLOCC"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4228
-#: ../../Firmware/ultralcd.cpp:4231
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "Azione FS"
 
@@ -621,36 +621,36 @@ msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME ERROR"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5585
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Stat. fallimenti"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5588
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Stat.fall. MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falso innesco"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5719
-#: ../../Firmware/ultralcd.cpp:5874
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Velocita vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7124
-#: ../../Firmware/ultralcd.cpp:7282 ../../Firmware/ultralcd.cpp:7283
-#: ../../Firmware/ultralcd.cpp:7284
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test ventola"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4765
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Control.vent"
 
@@ -679,40 +679,40 @@ msgid "Feeding to nozzle"
 msgstr "Alim. in ugello"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1233
-#: ../../Firmware/ultralcd.cpp:1262 ../../Firmware/ultralcd.cpp:1316
-#: ../../Firmware/ultralcd.cpp:1318
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fil. esauriti"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3456
-#: ../../Firmware/ultralcd.cpp:4208 ../../Firmware/ultralcd.cpp:4751
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Sensore fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3789
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filamento"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2277
-#: ../../Firmware/ultralcd.cpp:2281
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filamento estruso e con colore corretto?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2216
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. non caricato"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7008
-#: ../../Firmware/ultralcd.cpp:7012 ../../Firmware/ultralcd.cpp:7016
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Sensore filam."
 
@@ -745,52 +745,52 @@ msgstr ""
 "correttamente."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2350
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Fil. utilizzato"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7442
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "File incompleto. Continuare comunque?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5306 ../../Firmware/ultralcd.cpp:5626
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Finaliz. spostamenti"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4852
-#: ../../Firmware/ultralcd.cpp:5416
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Cal. primo strato"
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4015
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Per primo avviero l'autotest per controllare gli errori di assemblaggio piu "
 "comuni."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5720
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flusso"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6978
-#: ../../Firmware/ultralcd.cpp:7130 ../../Firmware/ultralcd.cpp:7135
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Ventola frontale?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2739
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Fronte [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7002
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Ventola frontale/sin"
 
@@ -839,42 +839,42 @@ msgstr ""
 "firmware. Stampa annullata."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4636
-#: ../../Firmware/ultralcd.cpp:4639 ../../Firmware/ultralcd.cpp:4642
-#: ../../Firmware/ultralcd.cpp:4645
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4672 ../../Firmware/ultralcd.cpp:4772
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "Impostazioni HW"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6950
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Riscald./Termist."
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6237 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:574
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Riscaldamento..."
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9478
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Riscaldamento fermato dal timer di sicurezza."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6268 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Riscald. completo"
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3991
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -885,7 +885,7 @@ msgstr ""
 "stampare."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:3994
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -894,9 +894,9 @@ msgstr ""
 "processo di configurazione?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:5758
-#: ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Forte"
 
@@ -907,18 +907,18 @@ msgid "Homing"
 msgstr "Homing"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1131
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Ventola hotend:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4024
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Adesso avviero una Calibrazione XYZ. Puo durare circa 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Adesso avviero la Calibrazione Z."
 
@@ -938,7 +938,7 @@ msgid "INVALID TOOL"
 msgstr "STRUM NON VAL"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4098
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -952,22 +952,22 @@ msgid "Improving bed calibration point"
 msgstr "Miglioramento punto di calibrazione del piatto"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5470
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Schermata info"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5537
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Inizial. scheda SD"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2152
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Inserire filamento"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6216
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -984,14 +984,14 @@ msgstr ""
 "firmware. Se il problema persiste, contattare l'assistenza."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3810
-#: ../../Firmware/ultralcd.cpp:4057
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Il filamento e' stato caricato?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3302 ../../Firmware/Marlin_main.cpp:4912
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4033
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Piastra d'acciaio su piano riscaldato?"
 
@@ -1001,98 +1001,98 @@ msgid "Iteration"
 msgstr "Iterazione"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1153
-#: ../../Firmware/ultralcd.cpp:1286
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Ultima stampa"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1173
-#: ../../Firmware/ultralcd.cpp:1260 ../../Firmware/ultralcd.cpp:1315
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Errori ultima stampa"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2481
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Sinistra"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6984
-#: ../../Firmware/ultralcd.cpp:7130 ../../Firmware/ultralcd.cpp:7135
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Vent SX hotend?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2737
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Sinistra [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Liv. Chiaro"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Liv. Scuro"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Correzione lineare"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4792
-#: ../../Firmware/ultralcd.cpp:5485
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Compensazione Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5081
-#: ../../Firmware/ultralcd.cpp:5161
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Carica tutti"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5083
-#: ../../Firmware/ultralcd.cpp:5102 ../../Firmware/ultralcd.cpp:5163
-#: ../../Firmware/ultralcd.cpp:5554 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Carica filamento"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5555
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Carica su estr."
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5556
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Carica ugello"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2188
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Caricando colore"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3652 ../../Firmware/messages.cpp:58
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
 #: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2199 ../../Firmware/ultralcd.cpp:3902
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Caricando filamento"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Puleggia lenta"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4431
-#: ../../Firmware/ultralcd.cpp:4443
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Forte"
 
@@ -1107,8 +1107,8 @@ msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Errore interno firmware MMU, resettare la MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4363
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "Mod. MMU"
 
@@ -1129,13 +1129,13 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU AUTOTEST FALLITO"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1174
-#: ../../Firmware/ultralcd.cpp:1202
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Fallimenti MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1175
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "Car MMU falliti"
 
@@ -1158,68 +1158,68 @@ msgstr ""
 "contatta il supporto."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1666
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 connessa"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5817
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Comp. Magneti"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1152
-#: ../../Firmware/ultralcd.cpp:1285 ../../Firmware/ultralcd.cpp:1327
-#: ../../Firmware/ultralcd.cpp:1631 ../../Firmware/ultralcd.cpp:4740
-#: ../../Firmware/ultralcd.cpp:4846 ../../Firmware/ultralcd.cpp:5080
-#: ../../Firmware/ultralcd.cpp:5100 ../../Firmware/ultralcd.cpp:5118
-#: ../../Firmware/ultralcd.cpp:5136 ../../Firmware/ultralcd.cpp:5160
-#: ../../Firmware/ultralcd.cpp:5713
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Menu principale"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2522
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Dev. misurata"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3283
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Misura altezza di rif. del punto di calib."
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5813
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Griglia"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4777
-#: ../../Firmware/ultralcd.cpp:4864
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Liv. griglia piano"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4317
-#: ../../Firmware/ultralcd.cpp:4319 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4342 ../../Firmware/ultralcd.cpp:4345
-#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:5744
-#: ../../Firmware/ultralcd.cpp:5751 ../../Firmware/ultralcd.cpp:5758
-#: ../../Firmware/ultralcd.cpp:5759 ../../Firmware/ultralcd.cpp:5760
-#: ../../Firmware/ultralcd.cpp:5761 ../../Firmware/ultralcd.cpp:5845
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mod."
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3570
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Cambio modalita in corso..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4556
-#: ../../Firmware/ultralcd.cpp:4559 ../../Firmware/ultralcd.cpp:4562
-#: ../../Firmware/ultralcd.cpp:4565
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modello"
 
@@ -1239,28 +1239,28 @@ msgid "More details online."
 msgstr "Piu dettagli online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6964
-#: ../../Firmware/ultralcd.cpp:6973 ../../Firmware/ultralcd.cpp:6991
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motore"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3492
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Sposta X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3493
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Sposta Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3494
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Sposta Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4746
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Muovi asse"
 
@@ -1272,10 +1272,10 @@ msgstr "Muovo il selettore"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2487 ../../Firmware/ultralcd.cpp:2532
-#: ../../Firmware/ultralcd.cpp:3417 ../../Firmware/ultralcd.cpp:4212
-#: ../../Firmware/ultralcd.cpp:4213 ../../Firmware/ultralcd.cpp:4215
-#: ../../Firmware/ultralcd.cpp:5817
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/D"
 
@@ -1285,75 +1285,75 @@ msgid "New firmware version available:"
 msgstr "Nuova vers. firmware disponibile:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2789
-#: ../../Firmware/ultralcd.cpp:3157 ../../Firmware/ultralcd.cpp:4730
-#: ../../Firmware/ultralcd.cpp:5980
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "No"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5535
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Nessuna SD"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5403
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Nessun movimento."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4386
-#: ../../Firmware/ultralcd.cpp:4474 ../../Firmware/ultralcd.cpp:4483
-#: ../../Firmware/ultralcd.cpp:4556 ../../Firmware/ultralcd.cpp:4565
-#: ../../Firmware/ultralcd.cpp:4595 ../../Firmware/ultralcd.cpp:4604
-#: ../../Firmware/ultralcd.cpp:4636 ../../Firmware/ultralcd.cpp:4645
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Nessuno"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4317
-#: ../../Firmware/ultralcd.cpp:4362 ../../Firmware/ultralcd.cpp:4378
-#: ../../Firmware/ultralcd.cpp:4397 ../../Firmware/ultralcd.cpp:5744
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normale"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6951
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Non connesso"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7149
-#: ../../Firmware/ultralcd.cpp:7164 ../../Firmware/ultralcd.cpp:7172
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Non gira"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3911
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Adesso calibro la distanza fra ugello e superfice del piatto."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4042
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Adesso preriscaldero l'ugello per PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4031
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Ora rimuovete la stampa di prova dalla piastra in acciaio."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1390
-#: ../../Firmware/ultralcd.cpp:4474 ../../Firmware/ultralcd.cpp:4477
-#: ../../Firmware/ultralcd.cpp:4480 ../../Firmware/ultralcd.cpp:4483
-#: ../../Firmware/ultralcd.cpp:5716 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Ugello"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4527
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Dia.Ugello"
 
@@ -1365,20 +1365,20 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4208
-#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4220
-#: ../../Firmware/ultralcd.cpp:4222 ../../Firmware/ultralcd.cpp:4247
-#: ../../Firmware/ultralcd.cpp:4275 ../../Firmware/ultralcd.cpp:4323
-#: ../../Firmware/ultralcd.cpp:4758 ../../Firmware/ultralcd.cpp:4765
-#: ../../Firmware/ultralcd.cpp:4784 ../../Firmware/ultralcd.cpp:4788
-#: ../../Firmware/ultralcd.cpp:5640 ../../Firmware/ultralcd.cpp:5737
-#: ../../Firmware/ultralcd.cpp:5748 ../../Firmware/ultralcd.cpp:5817
-#: ../../Firmware/ultralcd.cpp:7809 ../../Firmware/ultralcd.cpp:7813
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Off"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1514
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Sono state trovate impostazioni vecchie. Verranno impostati i valori "
@@ -1386,62 +1386,62 @@ msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4208 ../../Firmware/ultralcd.cpp:4219
-#: ../../Firmware/ultralcd.cpp:4220 ../../Firmware/ultralcd.cpp:4222
-#: ../../Firmware/ultralcd.cpp:4247 ../../Firmware/ultralcd.cpp:4265
-#: ../../Firmware/ultralcd.cpp:4322 ../../Firmware/ultralcd.cpp:4758
-#: ../../Firmware/ultralcd.cpp:4765 ../../Firmware/ultralcd.cpp:4784
-#: ../../Firmware/ultralcd.cpp:4788 ../../Firmware/ultralcd.cpp:5737
-#: ../../Firmware/ultralcd.cpp:5746 ../../Firmware/ultralcd.cpp:5817
-#: ../../Firmware/ultralcd.cpp:7809 ../../Firmware/ultralcd.cpp:7813
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "On"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4434
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Singolo"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9678 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSA ERRORE TERMICO"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1023
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "Calibrazione PID"
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1028
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "Calib. PID completa"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4867
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "Calibrazione PID"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:662
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Riscaldamento PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4958 ../../Firmware/Marlin_main.cpp:5061
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:659
-#: ../../Firmware/ultralcd.cpp:4784 ../../Firmware/ultralcd.cpp:4874
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "Calib. PINDA"
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3367
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Calibrazione temperatura fallita"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5138 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3361
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1461,13 +1461,13 @@ msgid "Parking selector"
 msgstr "Posteggio selettore"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4231
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pausa"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5499
-#: ../../Firmware/ultralcd.cpp:5501
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Metti in pausa"
 
@@ -1478,7 +1478,7 @@ msgid "Performing cut"
 msgstr "Eseguo taglio"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3307 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1487,7 +1487,7 @@ msgstr ""
 "punti. In caso l'ugello muova il foglio spegnere subito la stampante."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4121
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1496,34 +1496,34 @@ msgstr ""
 "riprendi il Wizard dopo aver riavviato la stampante."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6241
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Controllare il collegamento al sensore e rimuovere il filamento."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6945
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Verifica:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4093
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Per favore pulisci il piatto, poi premi la manopola."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3281 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Pulire l'ugello per la calibrazione, poi fare click."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3898
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 "Inserisci il filamento nell'estrusore, poi premi la manopola per caricarlo."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3895
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1532,50 +1532,50 @@ msgstr ""
 "manopola per caricarlo."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3818
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Per favore prima carica il filamento."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3582
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Aprire la guida filam. e rimuovere il filam. a mano"
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4035
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Per favore posizionate la piastra d'acciaio sul piano riscaldato."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11533 ../../Firmware/Marlin_main.cpp:11586
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Premete la manopola per scaricare il filamento"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5204
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Estrarre il filamento immediatamente"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4030
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Per favore rimuovete i materiali da spedizione"
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3304 ../../Firmware/Marlin_main.cpp:4922
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Rimuovete la piastra di acciaio dal piano riscaldato"
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4898
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Esegui la calibrazione XYZ prima."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6238
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Scaricare prima il filamento, poi ripetere l'operazione."
 
@@ -1585,51 +1585,51 @@ msgid "Please upgrade."
 msgstr "Prego aggiornare."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3578 ../../Firmware/Marlin_main.cpp:3596
-#: ../../Firmware/Marlin_main.cpp:7958 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2189 ../../Firmware/ultralcd.cpp:2200
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Attendere"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1232
-#: ../../Firmware/ultralcd.cpp:1261
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Interr. corr."
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5494
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Preriscalda"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2270
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Prerisc. ugello!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2885
-#: ../../Firmware/ultralcd.cpp:3880 ../../Firmware/ultralcd.cpp:3882
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Preriscaldando l'ugello. Attendere prego."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:1988
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Preriscalda. taglio"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1985
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Preriscalda. espuls."
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Preriscald. carico"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1981
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Preriscald. scarico"
 
@@ -1640,48 +1640,48 @@ msgid "Preparing blade"
 msgstr "Preparo la lama"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1796
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Premere la manopola"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11564
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Premete la manopola per preriscaldare l'ugello e continuare."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:858
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Stampa interrotta"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1131
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Vent.stam:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5527
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Stampa da SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:872
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Stampa in pausa"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2351
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Tempo di stampa"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1698
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Ind. IP stampante:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1527 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1722,29 +1722,29 @@ msgid "QUEUE FULL"
 msgstr "CODA PIENA"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4788
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "Porta RPi"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2740
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Retro [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10900
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Recupero stampa"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3462
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Rimuovi il filamento precedente e premi la manopola per caricare il nuovo "
 "filamento."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5418
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Rinomina"
 
@@ -1758,8 +1758,8 @@ msgstr ""
 "Controllare l'indice strumento nel G-code (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2741
-#: ../../Firmware/ultralcd.cpp:5419
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
@@ -1769,18 +1769,18 @@ msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset calibr. XYZ."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5513 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Riprendi stampa"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:670
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Riprendi stampa"
 
@@ -1802,17 +1802,17 @@ msgid "Returning selector"
 msgstr "Ritorno selettore"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2482
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Destra"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2738
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Destra [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3840
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1821,9 +1821,8 @@ msgstr ""
 "ricominciare dall'inizio. Continuare?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4376
-#: ../../Firmware/ultralcd.cpp:4378 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4397
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "Mem. SD"
 
@@ -1838,23 +1837,23 @@ msgid "SELECTOR CANNOT MOVE"
 msgstr "SELETTORE BLOCCATO"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9707 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "ARRESTATO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3287 ../../Firmware/Marlin_main.cpp:3309
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Ricerca punti calibrazione piano"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5411
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Seleziona"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1863,32 +1862,32 @@ msgstr ""
 "menu sullo schermo."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3520 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Seleziona estrusore:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3788
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Seleziona il filam.:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3633
-#: ../../Firmware/ultralcd.cpp:4795
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Seleziona lingua"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4067
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Selezionate la temperatura per il preriscaldamento dell'ugello adatta al "
 "vostro materiale."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3920
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Seleziona la temperatura appropriata per il tuo materiale."
 
@@ -1899,61 +1898,61 @@ msgid "Selecting fil. slot"
 msgstr "Seleziono slot fil."
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6505
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Autotest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6278
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Avvia autotest"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Autotest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6944
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Errore Autotest!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6509
-#: ../../Firmware/ultralcd.cpp:7031 ../../Firmware/ultralcd.cpp:7295
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Autotest fallito"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1546
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr "Verra effettuato un self test per calibrare l'homing senza sensori"
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1710
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Info Sensore"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6245
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Sensore verificato, rimuovere il filamento."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2758
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Imposta temperatura:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3491
-#: ../../Firmware/ultralcd.cpp:3650 ../../Firmware/ultralcd.cpp:4151
-#: ../../Firmware/ultralcd.cpp:5576 ../../Firmware/ultralcd.cpp:5808
-#: ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Impostazioni"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2525
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Deviaz. forte"
 
@@ -1964,7 +1963,7 @@ msgid "Sheet"
 msgstr "Piano"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3778
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1977,18 +1976,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4869
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Stato finecorsa"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:4437 ../../Firmware/ultralcd.cpp:5759
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Silenz."
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2524
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Deviaz. lieve"
 
@@ -2002,13 +2001,13 @@ msgstr ""
 "e 100 perche siano ordinati."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3053
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Sono stati rilevati problemi, avviato livellamento Z ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4384
-#: ../../Firmware/ultralcd.cpp:4385 ../../Firmware/ultralcd.cpp:4386
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Ordina"
 
@@ -2019,43 +2018,43 @@ msgid "Sorting files"
 msgstr "Ordinando i file"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4431
-#: ../../Firmware/ultralcd.cpp:4434 ../../Firmware/ultralcd.cpp:4437
-#: ../../Firmware/ultralcd.cpp:4440 ../../Firmware/ultralcd.cpp:4443
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Suono"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5714
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Velocita"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7147
-#: ../../Firmware/ultralcd.cpp:7162 ../../Firmware/ultralcd.cpp:7170
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Gira"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4911
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Sono necessari una temperatura ambiente di 21-26C e una superficie rigida."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5581
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistiche"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4319
-#: ../../Firmware/ultralcd.cpp:4363 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Silenz."
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4709
-#: ../../Firmware/ultralcd.cpp:5408
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Piani d'acciaio"
 
@@ -2065,25 +2064,25 @@ msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5520
-#: ../../Firmware/ultralcd.cpp:5979
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Arresta stampa"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4480
-#: ../../Firmware/ultralcd.cpp:4562 ../../Firmware/ultralcd.cpp:4601
-#: ../../Firmware/ultralcd.cpp:4642
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Esatto"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5590
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Supporto"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7003
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Scambiato"
 
@@ -2092,11 +2091,6 @@ msgstr "Scambiato"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIA TERMICA"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "Autocal. MT fallita"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
 #: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
 #: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
@@ -2127,18 +2121,13 @@ msgstr "ERR TMC SURRISCALD"
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNDERVOLTAGE ERR"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Cal. modello termico"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4742
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatura"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1716
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperature"
 
@@ -2173,7 +2162,7 @@ msgstr ""
 "sia nulla che ne blocchi il movimento."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3923
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2184,7 +2173,7 @@ msgstr ""
 "manuale (capitolo sulla calibrazione)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1540 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2193,39 +2182,39 @@ msgstr ""
 "Primi Passi, sezione Sequenza di Calibrazione."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4384
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Cron."
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5846
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Timeout"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1154
-#: ../../Firmware/ultralcd.cpp:1287
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Totale"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1201
-#: ../../Firmware/ultralcd.cpp:1231 ../../Firmware/ultralcd.cpp:1317
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Totale fallimenti"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2372
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filamento totale"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2373
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Tempo stampa totale"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5492
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Regola"
 
@@ -2249,15 +2238,15 @@ msgid "Unload"
 msgstr "Scarica"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5557
-#: ../../Firmware/ultralcd.cpp:5574
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Scarica filam."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3503 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5176
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Scaricando filamento"
 
@@ -2274,12 +2263,12 @@ msgid "Unloading to pulley"
 msgstr "Scarico in puleggia"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6248
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Verifica fallita, rimuovere il filamento e riprovare."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1719
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Voltaggi"
 
@@ -2290,7 +2279,7 @@ msgid "WARNING TMC TOO HOT"
 msgstr "ATTENZIONE TMC CALDO"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3534
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2303,193 +2292,181 @@ msgstr ""
 "Modalita silenziosa"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4116
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Attendendo utente..."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2866
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "In attesa del raffreddamento della sonda PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2898
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "In attesa del raffreddamento dell'ugello e del piano"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4477
-#: ../../Firmware/ultralcd.cpp:4559 ../../Firmware/ultralcd.cpp:4598
-#: ../../Firmware/ultralcd.cpp:4639
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Avviso"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1506
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Attenzione: tipo di stampante e di scheda madre cambiati."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1498
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Avviso: tipo di scheda madre cambiato"
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1502
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Avviso: tipo di stampante cambiato."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3575
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Filamento scaricato con successo?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6955
-#: ../../Firmware/ultralcd.cpp:6959 ../../Firmware/ultralcd.cpp:6979
-#: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7009
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Errore cablaggio"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4849
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Wizard"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4155
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Correzione-X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5592
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "Inizializza XFLASH"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1708
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ Cal. dettagli"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3339
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 "Calibrazione XYZ corretta. La distorsione verra compensata automaticamente."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3336
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3317
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3323
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-"Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3320
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3299
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 "Calibrazione XYZ fallita. Il punto di calibrazione sul piano non e' stato "
 "trovato."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3305
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3311
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3302
-#: ../../Firmware/ultralcd.cpp:3330
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Calibrazione XYZ fallita. Si prega di consultare il manuale."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3333
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2479
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Distanza Y dal min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4156
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Correzione-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2215
-#: ../../Firmware/ultralcd.cpp:2785 ../../Firmware/ultralcd.cpp:3157
-#: ../../Firmware/ultralcd.cpp:4730 ../../Firmware/ultralcd.cpp:5981
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Si"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4132
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "E possibile riprendere il Wizard in qualsiasi momento attraverso "
 "Calibrazione -> Wizard."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Correzione-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5816
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Nr. Z-test"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2550
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] punto offset"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2157
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "e cliccare manopola"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1804
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "per caricare il fil."
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1808
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "per scaricare fil."
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1675
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "sconosciuto"
 
@@ -2498,9 +2475,16 @@ msgstr "sconosciuto"
 msgid "unknown state"
 msgstr "stato sconosciuto"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6069
-#: ../../Firmware/ultralcd.cpp:6072
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Ricaricare"
 
@@ -2568,3 +2552,18 @@ msgstr "🔃Ricaricare"
 
 #~ msgid "Runouts"
 #~ msgstr "Esaurim"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "Autocal. MT fallita"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Cal. modello termico"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."

lang/po/Firmware_lb.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr ""
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ""
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr ""
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr ""
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr ""
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr ""
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr ""
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr ""
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr ""
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -168,209 +168,209 @@ msgid ""
 msgstr ""
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr ""
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr ""
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr ""
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr ""
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr ""
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr ""
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr ""
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr ""
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr ""
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr ""
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr ""
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr ""
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr ""
 
@@ -380,7 +380,7 @@ msgid "Crash detected."
 msgstr ""
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -388,34 +388,34 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr ""
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr ""
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr ""
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr ""
 
@@ -427,7 +427,7 @@ msgid "Disengaging idler"
 msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -436,19 +436,19 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
 msgstr ""
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr ""
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr ""
 
@@ -477,13 +477,13 @@ msgid "ERR Wait for User"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr ""
 
@@ -495,17 +495,17 @@ msgid "Ejecting filament"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr ""
 
@@ -517,121 +517,121 @@ msgid "Engaging idler"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr ""
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr ""
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr ""
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr ""
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr ""
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr ""
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr ""
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr ""
 
@@ -660,109 +660,109 @@ msgid "Feeding to nozzle"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr ""
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
 msgstr ""
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr ""
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr ""
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr ""
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr ""
 
@@ -805,42 +805,42 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr ""
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr ""
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -848,7 +848,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -857,9 +857,9 @@ msgstr ""
 "duerch de Setupprozess guideieren?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr ""
 
@@ -870,38 +870,38 @@ msgid "Homing"
 msgstr ""
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr ""
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr ""
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -913,43 +913,43 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr ""
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr ""
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr ""
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr ""
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
@@ -959,261 +959,262 @@ msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr ""
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr ""
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr ""
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr ""
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr ""
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr ""
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr ""
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr ""
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr ""
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr ""
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#. MSG_TITLE_SELFTEST_FAILED c=20
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
 msgid "MMU SELFTEST FAILED"
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr ""
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
 msgstr ""
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr ""
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr ""
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr ""
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr ""
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr ""
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr ""
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr ""
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr ""
 
@@ -1225,10 +1226,10 @@ msgstr ""
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr ""
 
@@ -1238,75 +1239,75 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr ""
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr ""
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr ""
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr ""
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr ""
 
@@ -1318,88 +1319,88 @@ msgstr ""
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr ""
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr ""
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr ""
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr ""
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr ""
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr ""
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr ""
 
@@ -1410,13 +1411,13 @@ msgid "Parking selector"
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr ""
 
@@ -1427,97 +1428,97 @@ msgid "Performing cut"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
 msgstr ""
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr ""
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
 msgstr ""
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr ""
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr ""
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr ""
 
@@ -1527,51 +1528,51 @@ msgid "Please upgrade."
 msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr ""
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr ""
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr ""
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr ""
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr ""
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr ""
 
@@ -1582,48 +1583,48 @@ msgid "Preparing blade"
 msgstr ""
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr ""
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr ""
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr ""
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr ""
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1642,7 +1643,7 @@ msgid ""
 msgstr ""
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 
@@ -1653,66 +1654,66 @@ msgid "Pushing filament"
 msgstr ""
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr ""
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr ""
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr ""
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr ""
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr ""
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr ""
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr ""
 
@@ -1723,7 +1724,7 @@ msgid "Retract from FINDA"
 msgstr ""
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr ""
 
@@ -1734,87 +1735,86 @@ msgid "Returning selector"
 msgstr ""
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr ""
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr ""
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr ""
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr ""
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr ""
 
@@ -1825,61 +1825,61 @@ msgid "Selecting fil. slot"
 msgstr ""
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr ""
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr ""
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr ""
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr ""
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr ""
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr ""
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr ""
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr ""
 
@@ -1890,7 +1890,7 @@ msgid "Sheet"
 msgstr ""
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1899,18 +1899,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr ""
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr ""
 
@@ -1922,13 +1922,13 @@ msgid ""
 msgstr ""
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr ""
 
@@ -1939,70 +1939,70 @@ msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr ""
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr ""
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr ""
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr ""
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr ""
 
@@ -2011,82 +2011,72 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr ""
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr ""
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr ""
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr ""
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr ""
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr ""
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr ""
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2094,76 +2084,76 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr ""
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr ""
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr ""
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr ""
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr ""
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
 msgstr ""
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr ""
 
@@ -2180,23 +2170,23 @@ msgid "Unloading to pulley"
 msgstr ""
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr ""
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr ""
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr ""
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2205,196 +2195,192 @@ msgid ""
 msgstr ""
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr ""
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr ""
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr ""
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr ""
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr ""
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr ""
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr ""
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr ""
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr ""
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr ""
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr ""
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr ""
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr ""
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr ""
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr ""
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr ""
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr ""
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_lt.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr ""
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ""
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr ""
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr ""
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr ""
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr ""
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr ""
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr ""
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr ""
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -168,209 +168,209 @@ msgid ""
 msgstr ""
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr ""
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr ""
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr ""
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr ""
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr ""
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr ""
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr ""
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr ""
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr ""
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr ""
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr ""
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr ""
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr ""
 
@@ -380,7 +380,7 @@ msgid "Crash detected."
 msgstr ""
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -388,34 +388,34 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr ""
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr ""
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr ""
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr ""
 
@@ -427,7 +427,7 @@ msgid "Disengaging idler"
 msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -436,19 +436,19 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
 msgstr ""
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr ""
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr ""
 
@@ -477,13 +477,13 @@ msgid "ERR Wait for User"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr ""
 
@@ -495,17 +495,17 @@ msgid "Ejecting filament"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr ""
 
@@ -517,121 +517,121 @@ msgid "Engaging idler"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr ""
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr ""
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr ""
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr ""
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr ""
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr ""
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr ""
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr ""
 
@@ -660,109 +660,109 @@ msgid "Feeding to nozzle"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr ""
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
 msgstr ""
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr ""
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr ""
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr ""
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr ""
 
@@ -805,42 +805,42 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr ""
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr ""
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -848,7 +848,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -857,9 +857,9 @@ msgstr ""
 "padetu jums atlikti sarankos procesa?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr ""
 
@@ -870,38 +870,38 @@ msgid "Homing"
 msgstr ""
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr ""
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr ""
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -913,43 +913,43 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr ""
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr ""
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr ""
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr ""
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
@@ -959,261 +959,262 @@ msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr ""
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr ""
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr ""
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr ""
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr ""
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr ""
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr ""
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr ""
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr ""
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr ""
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
-#. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#. MSG_TITLE_SELFTEST_FAILED c=20
+#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:192 ../../Firmware/mmu2/errors_list.h:193
 msgid "MMU SELFTEST FAILED"
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr ""
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
 msgstr ""
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr ""
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr ""
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr ""
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr ""
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr ""
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr ""
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr ""
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr ""
 
@@ -1225,10 +1226,10 @@ msgstr ""
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr ""
 
@@ -1238,75 +1239,75 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr ""
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr ""
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr ""
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr ""
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr ""
 
@@ -1318,88 +1319,88 @@ msgstr ""
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr ""
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr ""
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr ""
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr ""
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr ""
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr ""
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr ""
 
@@ -1410,13 +1411,13 @@ msgid "Parking selector"
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr ""
 
@@ -1427,97 +1428,97 @@ msgid "Performing cut"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
 msgstr ""
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr ""
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
 msgstr ""
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr ""
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr ""
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr ""
 
@@ -1527,51 +1528,51 @@ msgid "Please upgrade."
 msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr ""
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr ""
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr ""
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr ""
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr ""
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr ""
 
@@ -1582,48 +1583,48 @@ msgid "Preparing blade"
 msgstr ""
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr ""
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr ""
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr ""
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr ""
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1642,7 +1643,7 @@ msgid ""
 msgstr ""
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 
@@ -1653,66 +1654,66 @@ msgid "Pushing filament"
 msgstr ""
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr ""
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr ""
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr ""
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr ""
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr ""
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr ""
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr ""
 
@@ -1723,7 +1724,7 @@ msgid "Retract from FINDA"
 msgstr ""
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr ""
 
@@ -1734,87 +1735,86 @@ msgid "Returning selector"
 msgstr ""
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr ""
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr ""
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr ""
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr ""
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr ""
 
@@ -1825,61 +1825,61 @@ msgid "Selecting fil. slot"
 msgstr ""
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr ""
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr ""
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr ""
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr ""
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr ""
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr ""
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr ""
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr ""
 
@@ -1890,7 +1890,7 @@ msgid "Sheet"
 msgstr ""
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1899,18 +1899,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr ""
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr ""
 
@@ -1922,13 +1922,13 @@ msgid ""
 msgstr ""
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr ""
 
@@ -1939,70 +1939,70 @@ msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr ""
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr ""
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr ""
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr ""
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr ""
 
@@ -2011,82 +2011,72 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr ""
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr ""
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr ""
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr ""
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr ""
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr ""
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr ""
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2094,76 +2084,76 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr ""
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr ""
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr ""
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr ""
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr ""
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
 msgstr ""
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr ""
 
@@ -2180,23 +2170,23 @@ msgid "Unloading to pulley"
 msgstr ""
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr ""
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr ""
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr ""
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2205,196 +2195,192 @@ msgid ""
 msgstr ""
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr ""
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr ""
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr ""
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr ""
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr ""
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr ""
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr ""
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr ""
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr ""
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr ""
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr ""
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr ""
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr ""
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr ""
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr ""
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr ""
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr ""
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_nl.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 of ouder"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 of nieuwer"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s niveau verwacht"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Annuleren"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Z is ingesteld:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Allemaal goed"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Klaar. Happy printing!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Altijd"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Kamertemp."
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Zijn beide Z wagen heelemaal boven?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Assist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Startpositie"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Auto power"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autoladen filament"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -116,50 +116,50 @@ msgid "Avoiding grind"
 msgstr "Slijpen vermijden"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "As"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Aslengte"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "terug"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Bed"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Bed opwarmen"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Bed klaar"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Bed niveau correct"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -171,55 +171,55 @@ msgstr ""
 "reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Bed/Verwarming"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Riem status"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Riemtest"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Stroomstoring. Print herstellen?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Helder"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Helderheid"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "COMMUNICATIEFOUT"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibratie XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibratie Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -228,13 +228,13 @@ msgstr ""
 "stoppers. Druk knop als klaar."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibrere Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -243,143 +243,143 @@ msgstr ""
 "stoppers. Druk knop als klaar."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibreren start"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibratie"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibratie klaar"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Kan selector of spanrol niet bewegen."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "De actie kan niet worden uitgevoerd, de filament is al geladen. Eerst "
 "uitladen."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "SD verwijderd"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Wissel SD kaart"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Wissel filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Wissel geslaagd!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Wissel ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Controleer X as"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Controleer Y as"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Controleer Z as"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Controleer bed"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Controleer endstops"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Bestand controle"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Controleer hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Controleer sensors"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Checks"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Kleur niet juist"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Van de community"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Door."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Afkoelen"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Geselecteerde taal kopieren?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Crash"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Crashdet."
 
@@ -389,7 +389,7 @@ msgid "Crash detected."
 msgstr "Crash gedetecteerd."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -400,34 +400,34 @@ msgstr ""
 "gebruikt worden"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Fil. knippen"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Mes"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Dim"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Uitschak."
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Motoren uit"
 
@@ -439,7 +439,7 @@ msgid "Disengaging idler"
 msgstr "Ontkoppel spanrol"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -451,7 +451,7 @@ msgstr ""
 "calibration."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -460,12 +460,12 @@ msgstr ""
 "opnieuw in te stellen?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Klaar"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-correctie:"
 
@@ -494,13 +494,13 @@ msgid "ERR Wait for User"
 msgstr "FOUT Wacht gebruiker"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "FOUT:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Fil. uitwerpen"
 
@@ -512,17 +512,17 @@ msgid "Ejecting filament"
 msgstr "Fil. word ontladen"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Eindstop"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Endstop niet geraakt"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Eindstops"
 
@@ -534,47 +534,47 @@ msgid "Engaging idler"
 msgstr "Koppel spanrol"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Extruder info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autoladen"
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F.Jam ontdek."
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "FS. uitloop"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT AL GELADEN"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA TRIGGERDE NIET"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -583,7 +583,7 @@ msgstr ""
 "ontladen. Controleer of Fil. kan bewegen en of de FINDA werkt."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -592,67 +592,67 @@ msgstr ""
 "kan bewegen en FINDA werkt."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA NIET FIL.VRIJ"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS actie"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSEN. NIET AF GEGAAN"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR TE VROEG"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR FIL. VAST"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME FOUT"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Foutstatistieken"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "MMU-Fouten"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Valse triggering"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Fan snelh."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Fan test"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Fans check"
 
@@ -681,45 +681,45 @@ msgid "Feeding to nozzle"
 msgstr "Voeding tot tuit"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fil. fouten"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. sensor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament extrudeert met de juiste kleur?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. niet geladen"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Filamentsensor"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -728,7 +728,7 @@ msgstr ""
 "Controleer of het filament kan bewegen en de sensor werkt."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -737,7 +737,7 @@ msgstr ""
 "Controleer of het filament de fsensor heeft bereikt en de sensor werkt."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -746,52 +746,52 @@ msgstr ""
 "of er niets vastzit in de PTFE-buis. Controleer of de sensor goed leest."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Gebruikte filament"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Bestand onvolledig. Toch doorgaan?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Voortgang afwerken"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Eerste laag kal."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Ten eerste zullen we de zelftest uitvoeren om de meest voorkomende "
 "montageproblemen te controleren."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Stromen"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Voorzijde fan?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Voorkant [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Fans voor/links"
 
@@ -840,42 +840,42 @@ msgstr ""
 "alsjeblieft. Druk geannuleerd."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW Configuratie"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Verwarmer/Therm."
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Opwarmen"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Verwarming uitgeschakeld door veiligheidstimer."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Opwarmen klaar."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -886,7 +886,7 @@ msgstr ""
 "printen."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -895,9 +895,9 @@ msgstr ""
 "installatieproces?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Hoog verm."
 
@@ -908,38 +908,38 @@ msgid "Homing"
 msgstr "Startpositie"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend fan:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Begin nu met xyz-kalibratie. Het duurt ongeveer 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Begin nu met z-kalibratie."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "SPANROL STARTPOSFOUT"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "SPANROL BEWEGT NIET"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "ONGELDIG TOOL"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -953,22 +953,22 @@ msgid "Improving bed calibration point"
 msgstr "Verbetering van het bedijkingspunt"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Info scherm"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. SD kaart"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Voer filament in"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -976,7 +976,7 @@ msgstr ""
 "Steek a.u.b. filament (maar niet laden) in de extruder en druk op knop."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -985,14 +985,14 @@ msgstr ""
 "te werken. Als het probleem aanhoudt, neem dan contact op met support."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Is filament geladen?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Ligt de staalplaat op het bed?"
 
@@ -1002,124 +1002,124 @@ msgid "Iteration"
 msgstr "Iteratie"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Laatste print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Laatste printfouten"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Links"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Linker hotend fan?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Linkerkant[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Helder waard"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Dim waarde"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Lineaire correctie"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Live Z aanpassen"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Laad alle"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Filament laden"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Laad naar extruder"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Tot tuit laden"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Laden kleur"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Laden filament"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Losse riemschijf"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Hard"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE NODIG"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware interne fout, reset de MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU Mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU REAGEERT NIET"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Retry: Temperatuur herstellen..."
 
@@ -1130,18 +1130,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU ZELFTEST MISLUKT"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "MMU fout"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU laadfout"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1150,7 +1150,7 @@ msgstr ""
 "Als het probleem aanhoudt, neem dan contact op met support."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1159,108 +1159,109 @@ msgstr ""
 "probleem aanhoudt, neem dan contact op met support."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 verbonden"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Magnet. comp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Hoofdmenu"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Scheefheid"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Referentie hoogte van het kalibratiepunt meten"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Mesh"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Mesh bed Leveling"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Stand"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Moduswijziging bezig..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Meer details online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Verplaats X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Verplaats Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Verplaats Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "As verplaatsen"
 
@@ -1272,10 +1273,10 @@ msgstr "Bewege selector"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/V"
 
@@ -1285,75 +1286,75 @@ msgid "New firmware version available:"
 msgstr "Nieuwe firmware versie beschikbaar:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nee"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Geen SD kaart"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Geen beweging."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Geen"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normaal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Niet verbonden"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Draait niet"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Begin met kalibratie tussen de tuit en het bed."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Opwarmen van de tuit voor PLA voor."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Verwijder nu de testprint van staalplaat."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Tuit"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Tuit d."
 
@@ -1365,20 +1366,20 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Uit"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Oude instellingen gevonden. Standaard PID, E-steps etc. instellingen worden "
@@ -1386,62 +1387,62 @@ msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "Aan"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Eenmaal"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSE TERMISCHE FOUT"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kal."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kalibratie klaar"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibratie"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "PINDA opwarmen"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kalib."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "PINDA-kalibratie mislukt"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1450,7 +1451,7 @@ msgstr ""
 "menu Instellingen-> PINDA kalib."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "RIEMSCH. BEWEGT NIET"
 
@@ -1461,13 +1462,13 @@ msgid "Parking selector"
 msgstr "Parkere selector"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pauze"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Print pauzeren"
 
@@ -1478,7 +1479,7 @@ msgid "Performing cut"
 msgstr "Voer cut uit"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1487,7 +1488,7 @@ msgstr ""
 "punten. Als de tuit het papier beweegt, de printer onmiddellijk uitschakelen."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1496,35 +1497,35 @@ msgstr ""
 "wizard door de printer opnieuw te starten."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 "AUB IR sensor ver- binding kontrolleren , verwijder filament indien aanwezig."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Controleer aub:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Maak het bed schoon en druk op de knop."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Reinig de tuit voor de kalibratie. Druk op de knop wanneer gereed."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 "Steek a.u.b. filament in de extruder en druk op de knop om het te laden."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1533,50 +1534,50 @@ msgstr ""
 "te laden."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Laad a.u.b. eerst filament."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Open spanrol en verwijder filament handmatig."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Leg staalplaat op bed."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Druk op de knop om filament te verwijderen"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Trek onmiddellijk de filament eruit"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Verwijder eerst de transport beschermers."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Verwijder staalplaat van het bed."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Voer eerst de XYZ-kalibratie uit."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Verwijder eerst het filament en probeer het opnieuw."
 
@@ -1586,51 +1587,51 @@ msgid "Please upgrade."
 msgstr "Voer een upgrade uit"
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Even geduld aub"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Stroomstoringen"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Voorverwarmen"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Tuit voorverwarmen!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Opwarmen van de tuit. Wacht aub."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Opwarm. te snijden"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Opwarm.te uitwerpen"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Opwarmen invoeren"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Opwarmen uitwerpen"
 
@@ -1641,48 +1642,48 @@ msgid "Preparing blade"
 msgstr "Bereid mes voor"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Druk op knop"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Druk op de knop om de tuit voor te verwarmen en door te gaan."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Print afgebroken"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Print fan:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Print van SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Print pauzeren"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Print tijd"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Printer IP-adres:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1706,7 +1707,7 @@ msgstr ""
 "de waarde in de instellingen. Afdrukken geannuleerd."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Riemschijf motor is vastgelopen. Controleer of de poelie kan bewegen en "
@@ -1719,38 +1720,38 @@ msgid "Pushing filament"
 msgstr "Duwe filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "QUEUE VOL"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Achterkant[μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Print herstellen"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Verwijder de oude filament en druk op de knop om nieuwe filament te laden."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Hernoem"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1759,29 +1760,29 @@ msgstr ""
 "de G-code voor filament index buiten bereik (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Print hervatten"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Hervatten print"
 
@@ -1792,7 +1793,7 @@ msgid "Retract from FINDA"
 msgstr "Intrekken van FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Retry"
 
@@ -1803,17 +1804,17 @@ msgid "Returning selector"
 msgstr "Selctor terugrijden"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Rechts"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Recht.kant[μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1822,40 +1823,39 @@ msgstr ""
 "vanaf het begin. Doorgaan?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD kaart"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECTOR STARTP_FOUT"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECTOR BEWEG FOUT"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "GESTOPT."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Zoeken bed kalibratiepunt"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Selecteer"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1864,32 +1864,32 @@ msgstr ""
 "het schermmenu."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Kies extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Kies filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Kies taal"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Selecteer de voorverwarmingstemperatuur van de tuit die overeenkomt met uw "
 "materiaal."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Selecteer de temperatuur die overeenkomt met uw materiaal."
 
@@ -1900,63 +1900,63 @@ msgid "Selecting fil. slot"
 msgstr "Selectere fil. slot"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Zelftest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Zelftest start"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Zelftest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Zelftest fout!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Zelftest mislukt"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Zelftest zal worden uitgevoerd om nauwkeurige sensorloze auto positie te "
 "kalibreren."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Sensor info"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Sensor geverifieerd, verwijder nu het filament."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Temp. instellen:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Instellingen"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Erg scheef"
 
@@ -1967,7 +1967,7 @@ msgid "Sheet"
 msgstr "Staalplaat"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1980,18 +1980,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Toon endstops"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Stil"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Beetje scheef"
 
@@ -2005,13 +2005,13 @@ msgstr ""
 "per map 100 is."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Er is een probleem opgetreden, Z-kalibratie afgedwongen ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Sort."
 
@@ -2022,72 +2022,72 @@ msgid "Sorting files"
 msgstr "Bestanden sorteren"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Geluid"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Snelheid"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Draait"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "En stabiele 21-26C omgevingstemperatuur is nodig,een stevige stand is "
 "vereist."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistieken"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Stil"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Staalplaten"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Print stoppen"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Strikt"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Support"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Gewisseld"
 
@@ -2096,63 +2096,53 @@ msgstr "Gewisseld"
 msgid "THERMAL ANOMALY"
 msgstr "THERMISCHE ANOMALIE"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM autotune mislukt"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC FOUT"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC KORTSLUITING"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC OVERHITTINGSFOUT"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC ONDERVOLT. FOUT"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Temp. model autotune"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatuur"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperaturen"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Teste filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2160,7 +2150,7 @@ msgstr ""
 "blokkeert."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2169,7 +2159,7 @@ msgstr ""
 "printer. Controleer of de MMU-firmware up-to-date is."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2177,7 +2167,7 @@ msgstr ""
 "zit."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2188,7 +2178,7 @@ msgstr ""
 "(Calibration chapter)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2197,49 +2187,49 @@ msgstr ""
 "handleiding, hoofdstuk First steps, section Calibration flow."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Tijd"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Time-out"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Totaal"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Totaal fouten"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Totaal fil."
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Totaal printtijd"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Fijnafstemming"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "ONTLAAD MANUEEL"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2248,20 +2238,20 @@ msgstr ""
 "en dat de selecteur vrij is. Controleer de FINDA-verbinding."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Ontla."
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Fil. uitwerpen"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Uitwerpen filament"
 
@@ -2278,23 +2268,23 @@ msgid "Unloading to pulley"
 msgstr "Ontlade n. riemschi."
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Verificatie mislukt, verwijder het filament en probeer het opnieuw."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Spanning"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "WAARSCH. TMC TE HEET"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2307,200 +2297,196 @@ msgstr ""
 "Stealth stand"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Wacht op gebruiker.."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Wachten op afkoelen van PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Wachten op afkoelen van tuit en bed"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Waarsch."
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 "Waarschuwing: zowel het printertype als het moederbordtype is gewijzigd."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Waarschuwing: type moederbord gewijzigd."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Waarschuwing: printertype gewijzigd."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Is filament succes- vol verwijderd?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Aansluitingsfout"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Wizard"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "X-correctie:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ kal. details"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 "XYZ-kalibratie in orde. Scheefheid zal automatisch worden gecorrigeerd."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "XYZ-kalibratie in orde. X / Y-assen zijn licht scheef. Goed gedaan!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "XYZ-kalibratie niet gelukt. Voorste kalibratiepunten niet bereikbaar."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 "XYZ-kalibratie niet gelukt. Rechter voor kalibratiepunt niet bereikbaar."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "XYZ-kalibratie mislukt. Bed ijkpunt niet gevonden."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "XYZ-kalibratie mislukt. Voorste kalibratiepunten niet bereikbaar."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr "XYZ-kalibratie mislukt. Kalibratiepunt linksvoor niet bereikbaar."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ-kalibratie mislukt. Raadpleeg de handleiding aub."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr "XYZ-kalibratie mislukt. Rechter voor kalibratiepunt niet bereikbaar."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "XYZ-kalibratie ok. X / Y-assen staan loodrecht. Gefeliciteerd!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y afstand van min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Y-correctie:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Ja"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "U kunt de wizard altijd hervatten via Kalibratie -> Wizard."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Z-correctie:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z-test nr."
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] punt offset"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "en druk op knop"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "om filament te laden"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "om fil. uitwerpen"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "onbekend"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "Status onbekend"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Refresh"
 
@@ -2570,3 +2556,12 @@ msgstr "🔃Refresh"
 
 #~ msgid "Runouts"
 #~ msgstr "Fouten"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "TM autotune mislukt"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Temp. model autotune"
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr "XYZ-kalibratie mislukt. Kalibratiepunt linksvoor niet bereikbaar."

lang/po/Firmware_no.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 eller eldre"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 eller nyere"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s nivå ventet"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Avbryt"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Justerer Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Alt korrekt"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Alt klart. God printing!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Alltid"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Omgivelse"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Er venstre og høyre Z-vogn helt oppe?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Hjelp"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto hjem"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Autostyrke"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "AutoLast filament"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -116,50 +116,50 @@ msgid "Avoiding grind"
 msgstr "Unngår sliping"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Akse"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Akselengde"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Tilbake"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Seng"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Sengen varmes"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Seng ferdig"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Plankorrekt seng"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -171,55 +171,55 @@ msgstr ""
 "omstart."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Seng/Varmer"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Beltestatus"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Belte test"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Oppdaget Strømbrudd! Gjenoppta print?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Lys"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Lysstyrke"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "KOMMUNIKASJONSFEIL"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibrer XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibrer Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -228,13 +228,13 @@ msgstr ""
 "Deretter trykk."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibrer Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -243,141 +243,142 @@ msgstr ""
 "trykk."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibrerer hjem"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibrering"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibrering ferdig"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Kan ikke flytte velger eller tomgangshjul"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
-msgstr "Kan ikke utføre handling, filamentet er allerede lasted. Avless det først."
+msgstr ""
+"Kan ikke utføre handling, filamentet er allerede lasted. Avless det først."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Kort fjernet"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Bytt SD kort"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Bytt filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Bytte vellykket!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Byttet riktig?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Sjekker X aksen"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Sjekker Y aksen"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Sjekker Z aksen"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Sjekker seng"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Sjekker endesensorer"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Sjekker fil"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Sjekker hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Sjekker sensorer"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "G-code sjekk"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Farge ikke riktig"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Community laget"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Fort."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Nedkjøling"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Kopiere det valgte språket?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Krasj"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Krasjdetek."
 
@@ -387,7 +388,7 @@ msgid "Crash detected."
 msgstr "Krasj oppdaget."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -398,34 +399,34 @@ msgstr ""
 "Normal modus"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Kutt filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Kutter"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Dato:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Svak"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Deaktiver"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Frigjør motorer"
 
@@ -437,7 +438,7 @@ msgid "Disengaging idler"
 msgstr "Frigjør tomgangshjul"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -448,7 +449,7 @@ msgstr ""
 "manualen, under First Steps, for hvordan det første laget skal kalibreres."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -457,12 +458,12 @@ msgstr ""
 "platen?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Ferdig"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-korreksjon:"
 
@@ -491,13 +492,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Vent på Bruker"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "FEIL:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Mat ut filament"
 
@@ -509,17 +510,17 @@ msgid "Ejecting filament"
 msgstr "Mater ut filament"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Endesensor"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Traff ikke endesens."
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Endesensorer"
 
@@ -531,47 +532,47 @@ msgid "Engaging idler"
 msgstr "Aktiverer tomgangsh."
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Ekstruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Ekstruderinfo"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autolast"
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F. kork føle"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "F. Løput"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT ALLEREDE LA"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA IKKE UTLØST"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -580,76 +581,76 @@ msgstr ""
 "Sikre at filamentet kan beveges og FINDA fungerer."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
-"FINDA ble ikke trigger under lasting av filament. "
-"Sikre at filamentet kan beveges og FINDA fungerer."
+"FINDA ble ikke trigger under lasting av filament. Sikre at filamentet kan "
+"beveges og FINDA fungerer."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. FAST"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS aksjon"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR IKKE TIRGG."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR FOR TIDLIG"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR: FIL FAST"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME FEIL"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Feilstatistikk"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Feil stat. MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falskt utløsning"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Viftehastighet"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Viftetest"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Viftesjekk"
 
@@ -678,63 +679,63 @@ msgid "Feeding to nozzle"
 msgstr "Mater til dyse"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Tomt filament"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. Sensor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Kommer Filament ut og har riktig farge?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. ikke lastet"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Filamentsensor"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
-"Filament sensor skrudde ikke av imens filamentet lastet ut. "
-"Sikre at filamentet kan beveges og sensoren fungerer."
+"Filament sensor skrudde ikke av imens filamentet lastet ut. Sikre at "
+"filamentet kan beveges og sensoren fungerer."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
-"Filament sensor ble ikke utløst imens filamentet ble lastet. "
-"Sikre at filamentet rekker fsensor og at sensoren fungerer."
+"Filament sensor ble ikke utløst imens filamentet ble lastet. Sikre at "
+"filamentet rekker fsensor og at sensoren fungerer."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -743,50 +744,50 @@ msgstr ""
 "ingenting står fast i PTFE røret. Sjekk at sensoren leser riktig."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Brukt filament"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Fil er ukomplett. Fortsette allikevel?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Avslutter bevegelser"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Førstelagskal."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr "Først skal jeg kjøre en selvtest for å sjekke vanlige byggefeil."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flyt"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Fremre printvifte?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Fremsiden [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Fremre/venstre vifte"
 
@@ -829,46 +830,45 @@ msgid ""
 "G-code sliced for a newer firmware. Please update the firmware. Print "
 "cancelled."
 msgstr ""
-"G-code sliced for nyere fastvare. Vennligst oppdater systemet. Print "
-"avbrutt."
+"G-code sliced for nyere fastvare. Vennligst oppdater systemet. Print avbrutt."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "GW oppsett"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Varmer/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Varmer opp"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Varme skrudd av pga. sikkerhet."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Oppvarming ferdig."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -878,7 +878,7 @@ msgstr ""
 "oppsett, hvor Z aksen blir kalibrert. Du er da klar til å printe."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -887,9 +887,9 @@ msgstr ""
 "gjennom oppsettprosessen?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Høy styrke"
 
@@ -900,38 +900,38 @@ msgid "Homing"
 msgstr "Søker"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend-vifte:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Nå skal jeg kjøre kalibreringen. Det tar ca. 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Nå kjører jeg Z-kalibreringen."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER CANNOT HOME"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER CANNOT MOVE"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "UGYLDIG VERKTØY"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -945,29 +945,29 @@ msgid "Improving bed calibration point"
 msgstr "Forbedrer seng kalibreringspunkt"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Infoskjerm"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. SD kort"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Sett inn filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr "Sett inn filamentet i ekstruderen og deretter trykk inn valghjulet."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -976,14 +976,14 @@ msgstr ""
 "Hvis feilen vedvarer, kontakt kundestøtte."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Er filament lastet?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Er stålplaten på varmesenga?"
 
@@ -993,124 +993,124 @@ msgid "Iteration"
 msgstr "Iterasjon"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Siste print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Siste printfeil"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Venstre"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Venst. hotendvifte?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Vens. side[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Nivå Lyst"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Nivå Dimmet"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Lin. korreksjon"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Juster Live-Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Last Alle"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Last inn filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Last til ekstruder"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Last til dysen"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Laster farge"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Laster filament"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Løs reim"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Høyt"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FV OPPDAT. NØDVE"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU fastvare intern feil, vennligst nullstill MMU-en."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU Mod."
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU SVARER IKKE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU Retry: gjenoppretter temperatur..."
 
@@ -1121,18 +1121,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SELVTEST FEILET"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "MMU feil"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU lastefeil"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1141,117 +1141,118 @@ msgstr ""
 "vedvarer, kontakt støtte"
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
-"MMU enhet svarer ikke. Sjekk ledninger og koblinger. Hvis problemet vedvarer, "
-"kontakt støtte"
+"MMU enhet svarer ikke. Sjekk ledninger og koblinger. Hvis problemet "
+"vedvarer, kontakt støtte"
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 tilkoblet"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Magnet komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Hovedmeny"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Målt skjevhet"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Måler referansehøyde for kalibreringspunkt"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Plan-nett"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Sengeplanering"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Modus"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Modus endres..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Flere detaljer online"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Beveg X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Beveg Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Beveg Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Beveg akse"
 
@@ -1263,10 +1264,10 @@ msgstr "Flytter velger"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr " -"
 
@@ -1276,75 +1277,75 @@ msgid "New firmware version available:"
 msgstr "Ny fastvare tilgjengelig:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nei"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "SD-kort mangler"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Ingen bevegelse."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Ingen"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Ikke tilkoblet"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Spinner ikke"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Jeg vil nå kalibrere avstanden mellom tuppen av dysen og varmeplaten."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Jeg vil nå forvarme dysen for PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Fjern nå testprintet fra stålplaten."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Dyse"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Dyse diam."
 
@@ -1356,82 +1357,82 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Av"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Gamle verdier funnet Standarinnstillinger for PID, Esteg etc. blir satt."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "På"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "En gang"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSET THERMISK FEIL"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kal."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kal. ferdig"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibrering"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "PINDA varmes"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "PINDA kalibrering mislyktes"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1440,7 +1441,7 @@ msgstr ""
 "under Innstillinger -> PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "REIM UBEVEGELIG"
 
@@ -1451,13 +1452,13 @@ msgid "Parking selector"
 msgstr "Parkerer velger"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pause"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pause printjobben"
 
@@ -1468,7 +1469,7 @@ msgid "Performing cut"
 msgstr "Utfører kutt"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1477,7 +1478,7 @@ msgstr ""
 "dysen tar papiret, skru umiddelbart av printeren."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1486,33 +1487,33 @@ msgstr ""
 "omstarte printeren."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Vennligst sjekk koblingen til IR sensorer. Last ut filament om lastet."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Venligst sjekk:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Rengjør stålplaten og trykk valghjulet."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Rengjør dysen og trykk valghjulet."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr "Sett inn filament I ekstruderen og trykk valghjulet for å laste."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1521,50 +1522,50 @@ msgstr ""
 "å laste."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Vennligst sett inn filament først."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Åpne taljedøren og fjern filamentet for hånd."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Plasser stålplaten på varmesenga."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Trykk valghjulet for å ta ut filamentet"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Trekk ut filamented med en gang"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Vennligst fjern sendingsbeskyttelsen først."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Vennligst ta stålplaten av varmesenga."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Vennligst fullfør XYZ kalibreringen først."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Vennligst last ut filamentet først, deretter repeter denne handlingen."
 
@@ -1574,51 +1575,51 @@ msgid "Please upgrade."
 msgstr "Vennligst oppdater."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Vennligst vent"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Strømfeil"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Forvarming"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Forvarm dysen!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Forvarmer dysen. Vennligst vent..."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Forvarmer for kutt"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Forvarmer for utmat."
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Forvarmer for last"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Forvarmer for fil."
 
@@ -1629,48 +1630,48 @@ msgid "Preparing blade"
 msgstr "Forbereder blad"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Trykk valghjulet"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Trykk valghjulet for å forvarme dysen og fortsette."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Print avbrutt"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Printvifte:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Print fra SD-kort"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Print satt på pause"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Printetid"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Printer IP adr.:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1691,7 +1692,7 @@ msgstr ""
 "hva som er satt. Print avbrutt."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr "Reimmotor stanset. Sjekk at Reimen kan beveges og sjekk koblinger"
 
@@ -1702,66 +1703,68 @@ msgid "Pushing filament"
 msgstr "Dytter filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "FULL KØ"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Baksiden [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Gjenopptar print"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr "Ta bort det gamle filamentet og trykk valghjulet for å laste et nytt."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Gi nytt navn"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
-msgstr "Forespurt filamentverktøy er ikke tilgjengelig på denne maskinvaren. Sjekk g-code for verktøys-inteks ut av rekkevidde (T0-T4)"
+msgstr ""
+"Forespurt filamentverktøy er ikke tilgjengelig på denne maskinvaren. Sjekk g-"
+"code for verktøys-inteks ut av rekkevidde (T0-T4)"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Nullstill"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Nullstill XYZ kal."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Gjenoppta print"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Gjenopptar print"
 
@@ -1772,7 +1775,7 @@ msgid "Retract from FINDA"
 msgstr "ta tilbake fra FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Retry"
 
@@ -1783,17 +1786,17 @@ msgid "Returning selector"
 msgstr "Returnerer velger"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Høyre"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Høyre side[μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1802,70 +1805,69 @@ msgstr ""
 "begynne på nytt. Fortsette?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD-kort"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "VELGER KAN IKKE HOME"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELEKTOR STÅR FAST"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "STOPPET."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Søker etter kalibreringspunkt"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Velg"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr "Velg filamenttype for Førstelags- kalibrering."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Velg ekstruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Velg filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Velg språk"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr "Velg dysetemperatur som passer ditt materiale."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Velg temperaturen som passer ditt materiale."
 
@@ -1876,62 +1878,62 @@ msgid "Selecting fil. slot"
 msgstr "Velger fil. spor"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Selvtest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Selvtest starter"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Selvtest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Selvtest feil!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Selvtest feilet"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Selvtest vil bli kjørt for å kalibrere nøyaktig sensorløs hjemposisjon."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Sensorinformasjon"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Sensor verifiserte, fjern filamentet nå."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Satt temperatur:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Innstillinger"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Stor skjevhet"
 
@@ -1942,7 +1944,7 @@ msgid "Sheet"
 msgstr "Plate"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1955,18 +1957,18 @@ msgstr ""
 "%cNullstill"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Vis endesensorer"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Lydløs"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Lett skjevhet"
 
@@ -1978,13 +1980,13 @@ msgid ""
 msgstr "Noen filer vil ikke bli sortert. Maks antall filer i en mappe er 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Problem møtt. Z aksjeplanering tvunget ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Sorter"
 
@@ -1995,70 +1997,70 @@ msgid "Sorting files"
 msgstr "Sorter filer"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Lyd"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Hastighet"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Spinner"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr "En stabil rom- temperatur på 21-26C og et solid underlag er nødvendig."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistikk"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Stille"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Stål plate"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Stopp printjobb"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Streng"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "System info"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Byttet"
 
@@ -2067,84 +2069,76 @@ msgstr "Byttet"
 msgid "THERMAL ANOMALY"
 msgstr "THERMISK ANOMALI"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM autotune feilet"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER FEIL"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER NULLSTILL"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER KORTSLUTT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC OVEROPPHETING"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC LAVSPENNING FEIL"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Temp. model autotune"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatur"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperaturer"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Tester filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
-msgstr "Idleren kan ikke gå hjem riktig. sjekk om noe står i veien for bevegelsen."
+msgstr ""
+"Idleren kan ikke gå hjem riktig. sjekk om noe står i veien for bevegelsen."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
-"MMU enheten raporterer at fastvareversjonen ikke er kompatibel med printerens fastvare. "
-"Vær sikker på at MMU fastvaren er oppdatert."
+"MMU enheten raporterer at fastvareversjonen ikke er kompatibel med "
+"printerens fastvare. Vær sikker på at MMU fastvaren er oppdatert."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
-msgstr "Velgeren kan ikke gå hjem riktig. sjekk om noe står i veien for bevegelsen."
+msgstr ""
+"Velgeren kan ikke gå hjem riktig. sjekk om noe står i veien for bevegelsen."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2155,7 +2149,7 @@ msgstr ""
 "skal se ut."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2164,69 +2158,71 @@ msgstr ""
 "hovedmenyen og følg Veilederen."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Dato"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Tidsavbrudd"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Totalt"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Feil totalt"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filament totalt"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Printetid totalt"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Juster"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "LAST UT MANUELT"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
-msgstr "Uventet FINDA avlesning. Sjekk at det ikke er filament under FINDA og at selektoren er fri. Sjekk FINDA tilkobling."
+msgstr ""
+"Uventet FINDA avlesning. Sjekk at det ikke er filament under FINDA og at "
+"selektoren er fri. Sjekk FINDA tilkobling."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Last ut"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Last ut filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Laster ut filament"
 
@@ -2243,23 +2239,23 @@ msgid "Unloading to pulley"
 msgstr "Utlaster til trinse"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Verifisering feilet. Fjern filamentet og prøv igjen."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Strøm/Volt"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "VARSEL TMC FOR VARM"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2272,199 +2268,195 @@ msgstr ""
 "Stillemodus"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Venter på bruker..."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Venter på PINDA nedkjøling"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Venter på dyse- og platenedkjøling"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Advarsel"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Advarsel: Både printertype og hovedkortype er forandret."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Advarsel: Hovedkortype forandret."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Advarsel: Printertype forandret."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Ble filamentet lastet helt ut?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Koblingsfeil"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Veileder"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "X-korreksjon:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ cal. detaljer"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "XYZ kalibreringen er grei. Skjevhet blir justert automatisk."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "XYZ kalibreringen er god. Godt jobba!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "XYZ kalibreringen feilet. Front kalibreringspunkt ikke nådd."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr "XYZ kalibrasjon feilet. Fremre venstre kalibrerings kan ikke nås."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr "XYZ kalibreringen feilet. Høyre front kalibreringspunkt ikke nådd."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "XYZ kalibreringen feilet. Kalibreringspunkt ikke funnet."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "XYZ kalibreringen feilet. Front kalibreringspunkt ikke nådd."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr "XYZ kalibreringen feilet. Fremre venstre kalibreringspunkt kan ikke nås"
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ kal. mislyktes. Vennligst rådfør med håndboken."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr "XYZ kalibreringen feilet. Høyre front kalibreringspunkt ikke nådd."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr ""
 "XYZ kalibrering OK.\n"
 "X og Y aksen er perpendikulær. Gratulerer!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y distanse fra min."
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Y-korreksjon:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Ja"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Du kan alltid starte Veilederen fra Kalibrering -> Veileder."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Z-korreksjon:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z-sensor nr."
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] punktforskyv."
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "og trykk på knappen"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "for filamentlast"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "for filament ut"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "ukjent"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "ukjent tilstand"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Forfriske"
 
@@ -2532,3 +2524,17 @@ msgstr "🔃Forfriske"
 
 #~ msgid "Runouts"
 #~ msgstr "F. tomt"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "TM autotune feilet"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Temp. model autotune"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr "XYZ kalibrasjon feilet. Fremre venstre kalibrerings kan ikke nås."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "XYZ kalibreringen feilet. Fremre venstre kalibreringspunkt kan ikke nås"

lang/po/Firmware_pl.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 lub starszy"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 lub nowszy"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "Oczekiwano wersji %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Anuluj"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Ustawianie Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Wszystko OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Gotowe. Udanego drukowania!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfab"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Zawsze"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Otoczenie"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Obydwa konce osi sa na szczycie?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Asyst."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto zerowanie"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Automatycz"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autoladowanie fil."
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr "Autoladowanie filamentu wlaczone, nacisnij pokretlo i wsun filament..."
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr "Unikaj scierania"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Os"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Dlugosc osi"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Wstecz"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Stol"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Grzanie stolu"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Stol OK"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Korekta stolu"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -170,55 +170,55 @@ msgstr ""
 "reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Stol/Grzanie"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Stan paskow"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test paskow"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Wykryto zanik napiecia.Kontynowac?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Jasny"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Jasnosc"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "BLAD KOMUNIKACJI"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibracja XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibruj Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -227,13 +227,13 @@ msgstr ""
 "ogranicznikow. Nacisnij, by potwierdzic."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibruje Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -242,142 +242,142 @@ msgstr ""
 "ogranicznikow. Nacisnij, by potwierdzic."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Zerowanie osi"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibracja"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibracja OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Nie mozna poruszyc wybieraka lub docisku"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "Nie mozna wykonac akcji, filament jest juz zaladowany. Rozladuj go najpierw."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Karta wyjeta"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Zmiana karty SD"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Wymiana filamentu"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Wymiana ok!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Wymiana ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Kontrola osi X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Kontrola osi Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Kontrola osi Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Kontrola stolu"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Kontrola krancowek"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Sprawdzanie pliku"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Kontrola hotendu"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Kontrola czujnikow"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Testy"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Kolor zanieczysz."
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Od spolecznosci"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Kont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Chlodzenie"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Skopiowac wybrany jezyk?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Zderzen"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Wykr.zderzen"
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Zderzenie wykryte"
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -399,34 +399,34 @@ msgstr ""
 "trybie Normalnym"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Ciecie filamentu"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Nozyk"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Data:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Sciemn"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Wylacz"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Wylacz silniki"
 
@@ -438,7 +438,7 @@ msgid "Disengaging idler"
 msgstr "Zwalnianie docisku"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -449,7 +449,7 @@ msgstr ""
 "z instrukcja: rozdzial Wprowadzenie - Kalibracja pierwszej warstwy."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -458,12 +458,12 @@ msgstr ""
 "stolikiem?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Wyk."
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "Korekcja-E:"
 
@@ -492,13 +492,13 @@ msgid "ERR Wait for User"
 msgstr "ERR czekam na uzytk."
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "BLAD:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Wysun filament"
 
@@ -510,17 +510,17 @@ msgid "Ejecting filament"
 msgstr "Wysuwanie filamentu"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Krancowka"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Krancowka nie aktyw."
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Krancowki"
 
@@ -532,47 +532,47 @@ msgid "Engaging idler"
 msgstr "Urucham. docisku"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Ekstruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Ekstruder - info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "Autolad. fil."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "Zaciecie fil."
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "Koniec fil."
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT JUZ ZALAD."
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NIE WLACZONA"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -582,7 +582,7 @@ msgstr ""
 "dziala."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -591,67 +591,67 @@ msgstr ""
 "filament moze sie poruszac i FINDA dziala."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FIL. ZABLOK."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "Akcja FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR NIE WLACZ."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR ZBYT WCZESN."
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR: FIL. ZABLOK"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "BLAD DZIALANIA FW"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Statystyki bledow"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Bledy MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falszywy alarm"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Predkosc went."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test wentylatora"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Sprawd.went."
 
@@ -680,45 +680,45 @@ msgid "Feeding to nozzle"
 msgstr "Podaw. do dyszy"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Konc.filamentu"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Czuj. filam."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament wychodzi z dyszy,kolor jest ok?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. nie zaladowany"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Czujnik filamentu"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -727,7 +727,7 @@ msgstr ""
 "Sprawdz, czy filament moze sie poruszac i czy czujnik dziala."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -736,7 +736,7 @@ msgstr ""
 "filament dotarl do czujnika i czy czujnik dziala."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -745,52 +745,52 @@ msgstr ""
 "nic nie utknelo w rurce PTFE. Sprawdz czy czujnik odczytuje prawidlowo."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Uzyty filament"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Plik niekompletny. Kontynowac?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Konczenie druku"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Kal. 1. warstwy"
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Najpierw wlacze selftest w celu sprawdzenia najczestszych problemow podczas "
 "montazu."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Przeplyw"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Przedni went. druku?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Przod [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Przedni/lewy wentyl."
 
@@ -837,42 +837,42 @@ msgstr ""
 "G-code pociety dla nowszego firmware. Zaktualizuj firmware. Druk anulowany."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "Ustawienia HW"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Grzalka/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Grzanie..."
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Grzanie wylaczone przez wyl. czasowy"
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Grzanie zakonczone"
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -882,7 +882,7 @@ msgstr ""
 "krotka kalibracje osi Z, po ktorej mozesz rozpoczac drukowanie."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -891,9 +891,9 @@ msgstr ""
 "ustawieniem?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Wysoka wyd"
 
@@ -904,38 +904,38 @@ msgid "Homing"
 msgstr "Bazowanie"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Went. hotend:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Przeprowadze teraz kalibracje XYZ. Zajmie ok. 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Przeprowadze kalibracje Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "DOCISK NIE BAZUJE"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "DOCISK NIE RUSZA SIE"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "BLEDNE NARZEDZIE"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -949,22 +949,22 @@ msgid "Improving bed calibration point"
 msgstr "Poprawa punktu kalibracji stolu"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Ekran informacyjny"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Inic. karty SD"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Wprowadz filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -973,7 +973,7 @@ msgstr ""
 "pokretlo."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -982,14 +982,14 @@ msgstr ""
 "Jesli problem nadal wystepuje, skontaktuj sie z pomoca techniczna."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Filament jest zaladowany?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Czy plyta stal. jest na podgrzew. stole?"
 
@@ -999,124 +999,124 @@ msgid "Iteration"
 msgstr "Iteracja"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Ost. wydruk"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Ostatnie bledy druku"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Lewa"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Lewy went hotendu?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Lewo [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Poziom jasn."
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Poziom ciem."
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Korekcja liniowa"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Ustaw. Live Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Zalad. wszystkie"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Ladowanie fil."
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Zalad. do ekstr."
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Zaladuj do dyszy"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Czyszcz. koloru"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Laduje filament"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Luzne kolo pasowe"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Glosny"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW WYMAGA AKTUAL"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Blad wewnetrzny MMU Firmware, zresetuj MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "Tryb MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NIE ODPOWIADA"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU wznaw. Nagrzewanie..."
 
@@ -1127,18 +1127,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU BLAD SELFTEST"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Bledy MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "Bledy lad. MMU"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1147,7 +1147,7 @@ msgstr ""
 "problem nadal wystepuje, skontaktuj sie z pomoca techniczna."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1156,108 +1156,109 @@ msgstr ""
 "wystepuje, skontaktuj sie z pomoca techniczna."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU podlaczone"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Kor. magnesow"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Menu glowne"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Zmierz. skos"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Okreslam wysokosc odniesienia punktu kalibracyjnego"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Siatka"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Poziomowanie stolu"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Tryb"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Trwa zmiana trybu..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Więcej szczegółów online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Silnik"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Ruch osi X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Ruch osi Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Ruch osi Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Ruch osi"
 
@@ -1269,10 +1270,10 @@ msgstr "Ruch wybieraka"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/D"
 
@@ -1282,75 +1283,75 @@ msgid "New firmware version available:"
 msgstr "Dostepna nowa wersja firmware:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nie"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Brak karty SD"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Brak ruchu."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Brak"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nie podlaczono"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Nie kreci sie"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Kalibruje odleglosc miedzy koncowka dyszy a powierzchnia druku."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Nagrzewam dysze dla PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Teraz zdejmij wydruk testowy ze stolu."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Dysza"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Sr. dyszy"
 
@@ -1362,20 +1363,20 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Wyl"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 "Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, "
@@ -1383,62 +1384,62 @@ msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "Wl"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "1-raz"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUZA BLAD TERMICZNY"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "Kalibracja PID"
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "Kal. PID zakonczona"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "Kalibracja PID"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Grzanie sondy PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "Kalib. PINDA"
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Kalibracja temperaturowa nieudana"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1447,7 +1448,7 @@ msgstr ""
 "-> Kalib. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "RADELKO NIE RUSZA"
 
@@ -1458,13 +1459,13 @@ msgid "Parking selector"
 msgstr "Parkowanie wybieraka"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Wstrzym. wydruku"
 
@@ -1475,7 +1476,7 @@ msgid "Performing cut"
 msgstr "Odcinanie"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1484,7 +1485,7 @@ msgstr ""
 "punktow. Jesli dysza zahaczy o papier, natychmiast wylacz drukarke."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1493,33 +1494,33 @@ msgstr ""
 "Asystenta przez restart drukarki."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Sprawdz polaczenie czujnika IR, rozladuj filament, jesli zaladowany."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Sprawdz:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Oczysc powierzchnie druku i nacisnij pokretlo."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Dla prawidlowej kalibracji nalezy oczyscic dysze. Potwierdz guzikiem."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr "Wsun filament do ekstrudera i nacisnij pokretlo, aby go zaladowac."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1528,51 +1529,51 @@ msgstr ""
 "zaladowac."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Najpierw zaladuj filament."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 "Prosze odciagnac dzwignie dociskowa ekstrudera i recznie usunac filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Prosze umiescic plyte stalowa na stole podgrzewanym."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Nacisnij pokretlo aby rozladowac filament"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Wyciagnij filament teraz"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Najpierw usun zabezpieczenia transportowe"
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Prosze zdjac plyte stalowa z podgrzewanego stolu."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Prosze najpierw uruchomic kalibracje XYZ"
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Najpierw rozladuj filament, nastepnie powtorz czynnosc."
 
@@ -1582,51 +1583,51 @@ msgid "Please upgrade."
 msgstr "Prosze zaktualizowac"
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Prosze czekac"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Zaniki zasil."
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Grzanie"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Nagrzej dysze!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Nagrzewanie dyszy. Prosze czekac."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Nagrzew. obciecia"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Nagrzew. wysuniecia"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Nagrzew.do ladowania"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Nagrzew. do rozlad."
 
@@ -1637,48 +1638,48 @@ msgid "Preparing blade"
 msgstr "Przygot. ostrza"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Wcisnij pokretlo"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Wcisnij pokretlo aby rozgrzac dysze i kontynuowac."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Druk przerwany"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "WentWydruk:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Druk z karty SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Druk wstrzymany"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Czas druku"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Adr. IP drukarki:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1700,7 +1701,7 @@ msgstr ""
 "Srednica dyszy rozni sie od tej w G-code. Sprawdz ustawienia. Druk anulowany."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Silnik kola radelkowanego utknal. Upewnij sie, ze kolo moze sie poruszac i "
@@ -1713,37 +1714,37 @@ msgid "Pushing filament"
 msgstr "Wsuwanie filamentu"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "KOLEJKA PELNA"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "Port RPi"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Tyl [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Wznawianie wydruku"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr "Wyciagnij poprzedni filament i nacisnij pokretlo aby zaladowac nowy."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Zmien nazwe"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1752,29 +1753,29 @@ msgstr ""
 "pod wzgledem indeksu narzedzia poza zakresem (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset kalibr. XYZ"
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Wznowic wydruk"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Wznawianie druku"
 
@@ -1785,7 +1786,7 @@ msgid "Retract from FINDA"
 msgstr "Wycof, z FINDY"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Ponow"
 
@@ -1796,17 +1797,17 @@ msgid "Returning selector"
 msgstr "Powrot wybieraka"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Prawa"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Prawo [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1815,40 +1816,39 @@ msgstr ""
 "Kontynuowac?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "Karta SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "WYBIERAK NIE BAZUJE"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "WYBIERAK NIE RUSZA"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "ZATRZYMANO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Szukam punktu kalib. na stole"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Wybierz"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1857,30 +1857,30 @@ msgstr ""
 "ekranowym."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Wybierz ekstruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Wybierz filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Wybor jezyka"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr "Wybierz temperature grzania dyszy odpowiednia dla materialu."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Wybierz temperature, ktora odpowiada Twojemu filamentowi."
 
@@ -1891,63 +1891,63 @@ msgid "Selecting fil. slot"
 msgstr "Wybieranie slotu fil"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Selftest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Selftest startuje"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Selftest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Blad selftest!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Selftest nieudany"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Zostanie uruchomiony Selftest aby dokladnie skalibrowac punkt bazowy bez "
 "krancowek"
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Info o sensorach"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Czujnik sprawdzony, wyciagnij filament."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Ustaw temperature:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Ustawienia"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Znaczny skos"
 
@@ -1958,7 +1958,7 @@ msgid "Sheet"
 msgstr "Plyta"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1971,18 +1971,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Pokaz krancowki"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Cichy"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Lekki skos"
 
@@ -1996,13 +1996,13 @@ msgstr ""
 "100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Wykryto problem, wymuszono poziomowanie osi Z."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Sort."
 
@@ -2013,71 +2013,71 @@ msgid "Sorting files"
 msgstr "Sortowanie plikow"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Dzwiek"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Predkosc"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Kreci sie"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Potrzebna jest stabilna temperatura otoczenia 21-26C i stabilne podloze."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statystyki"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Cichy"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Plyty stalowe"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Przerwanie druku"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Restr."
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Wsparcie"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Zamieniono"
 
@@ -2086,63 +2086,53 @@ msgstr "Zamieniono"
 msgid "THERMAL ANOMALY"
 msgstr "THERMAL ANOMALY"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "Blad TM autotune"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "BLAD STEROW. TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "RESET STEROW. TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "ZWARCIE STEROW. TMC"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "PRZEGRZANIE TMC"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ZA NIS. NAPIECIE TMC"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Autotune modelu temp"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatura"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperatury"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Test filamentu"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2150,7 +2140,7 @@ msgstr ""
 "ruchu."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2159,7 +2149,7 @@ msgstr ""
 "MMU jest aktualne."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2167,7 +2157,7 @@ msgstr ""
 "ruchu."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2178,7 +2168,7 @@ msgstr ""
 "Kalibracja)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2187,49 +2177,49 @@ msgstr ""
 "Kroki, sekcja Kalibracja."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Czas"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Wyl. czas."
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Suma"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Suma bledow"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Zuzycie filamentu"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Laczny czas druku"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Strojenie"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "ROZLAD. RECZNIE"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2238,20 +2228,20 @@ msgstr ""
 "pod FINDA, a wybierak jest wolny. Sprawdz polaczenie FINDA."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Rozladuj"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Rozladowanie fil"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Rozladowuje filament"
 
@@ -2268,23 +2258,23 @@ msgid "Unloading to pulley"
 msgstr "Rozladow. do radelka"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Niepowodzenie sprawdzenia, wyciagnij filament i sprobuj ponownie."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Napiecia"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "UWAGA TMC ZA GORACY"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2297,202 +2287,198 @@ msgstr ""
 "trybie Stealth"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Czekam na uzytk. ..."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Czekam az spadnie temp. sondy PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Oczekiwanie na wychlodzenie dyszy i stolu"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Ostrzez"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Ostrzezenie: typ drukarki i plyta glowna ulegly zmianie."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Ostrzezenie: plyta glowna ulegla zmianie."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Ostrzezenie: rodzaj drukarki ulegl zmianie"
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Rozladowanie fil. ok?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Blad polaczenia"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Asystent"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Korekcja-X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "Szczegoly kal. XYZ"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "Kalibracja XYZ pomyslna. Skos bedzie automatycznie korygowany."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "Kalibr. XYZ niedokladna. Przednie punkty kalibr. nieosiagalne."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr "Kalibracja XYZ niedokladna. Prawy przedni punkt nieosiagalny."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "Kalibracja XYZ nieudana. Nie znaleziono punktow kalibracyjnych."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 "Kalibr. XYZ nieudana. Przednie punkty kalibr. nieosiagalne. Nalezy poprawic "
 "montaz drukarki."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Kalibracja XYZ nieudana. Sprawdz przyczyny i rozwiazania w instrukcji."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "Kalibr. XYZ nieudana. Prawy przedni punkt nieosiagalny. Nalezy poprawic "
 "montaz drukarki."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Dystans od 0 w osi Y"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Korekcja-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Tak"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Zawsze mozesz uruchomic Asystenta ponownie przez Kalibracja -> Asystent."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Korekcja-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Ilosc Pomiarow"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] przesun.punktu"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "i nacisnij pokretlo"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "aby zaladow. fil."
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "aby rozlad. filament"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "nieznane"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "Stan nieznany"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Odswiezac"
 
@@ -2560,3 +2546,9 @@ msgstr "🔃Odswiezac"
 
 #~ msgid "Runouts"
 #~ msgstr "Konce f"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "Blad TM autotune"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Autotune modelu temp"

lang/po/Firmware_ro.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 / mai vechi"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 / mai nou"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "nivel %s asteptat"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Anuleaza"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Ajustare Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Totul OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Totul este OK. Distractie placuta!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Mereu"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Ambiental"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Este axa Z aliniata sus?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto home"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Put. auto"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Inc.auto Filament"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -117,50 +117,50 @@ msgid "Avoiding grind"
 msgstr "Avoiding grind"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Axa"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Lungime axa"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Inapoi"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Pat"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Patul se incalzeste"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Pat incalzit"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Nivelare pat"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -172,55 +172,55 @@ msgstr ""
 "reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Incalzitor/Pat"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Status curele"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test curele"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Pana de curent. Continuati printul?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Maxim"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Luminozitate ecran"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "EROARE DE COMUNICARE"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Calibrare XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Calibrare Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -229,13 +229,13 @@ msgstr ""
 "butonul cand este gata."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Calibrare Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -244,143 +244,143 @@ msgstr ""
 "butonul cand este gata."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Calibrare home"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Calibrare"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Calibrare gata"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Select./Idler blocat"
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "Nu se poate efectua actiunea, filamentul este incarcat.Descarcati-l mai "
 "intai."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Card scos"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Schimba card SD"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Schimba filamentul"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Schimbare cu succes!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Schimbat corect?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Verificare axa X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Verificare axa Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Verificare axa Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Verificare pat"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Verif. endstop-uri"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Verif. fisier"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Verificare hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Verificare senzori"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Verificari"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Culoare gresita"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Comunitate"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Cont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Racire"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Copiaza limba selectata?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Coliz."
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Det.coliziune"
 
@@ -390,7 +390,7 @@ msgid "Crash detected."
 msgstr "Coliziune detectata."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -401,34 +401,34 @@ msgstr ""
 "doar in modul normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Taie filamentul"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Cutter"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Data:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Minim"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Dezactiv."
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Oprire steppere"
 
@@ -440,7 +440,7 @@ msgid "Disengaging idler"
 msgstr "Decuplare idler"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -451,7 +451,7 @@ msgstr ""
 "manual, capitolul First steps, sectiunea First layer calibration."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -460,12 +460,12 @@ msgstr ""
 "suprafata de print?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Gata"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-correctie:"
 
@@ -494,13 +494,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Astept utilizat."
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "EROARE:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Scoate filament"
 
@@ -512,17 +512,17 @@ msgid "Ejecting filament"
 msgstr "Se scoate filamentul"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Endstop"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Endstop neatins"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Endstop-uri"
 
@@ -534,47 +534,47 @@ msgid "Engaging idler"
 msgstr "Cuplare idler"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Info. extruder"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "Autoload fil."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F. blocaj det"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "Fil. epuizat"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAM. DEJA INCARCAT"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA NU SA DECLANST"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -583,7 +583,7 @@ msgstr ""
 "ca FINDA functioneaza."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -592,67 +592,67 @@ msgstr ""
 "misca si FINDA functioneaza."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. BLOCAT"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "Actiune FS"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENZ NU SA DECLASAT"
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR PREA DEVREME"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR: FIL. BLOCAT"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "Eroare FW RUNTIME"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Statistici erori"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Stat. erori MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "nu detect. schimbare"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Viteza vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test ventilator"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Verif. vent."
 
@@ -681,45 +681,45 @@ msgid "Feeding to nozzle"
 msgstr "Incarcare la varf"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Epuizari Fil."
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Senzor Fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Fil. curge si are culoarea corecta?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Fil. nu e incarcat"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Senz. de filament"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -728,7 +728,7 @@ msgstr ""
 "filamentul se misca si senzorul functioneaza."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -737,7 +737,7 @@ msgstr ""
 "ca filamentul a ajuns la fsenzor si senzorul functioneaza."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -746,52 +746,52 @@ msgstr ""
 "nu este nimic blocat in tub-ul PTFE. Verifica daca senz. funct. corect."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Filament folosit"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Fisier incomplet. Continua oricum?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Finalizare miscari"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Cal. first layer"
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Mai intai, voi rula testele automate pentru a verifica cele mai intalnite "
 "probleme de asamblare."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flow"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Vent. print?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Fata [μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Ventilatoarele sunt"
 
@@ -840,42 +840,42 @@ msgstr ""
 "Print anulat."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "Setup HW"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Incalzitor/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Incalzire"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Incalzirea dezactivata de timer-ul de siguranta"
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Incalzirea gata."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -885,7 +885,7 @@ msgstr ""
 "proces de setup in care axa Z va fi calibrata. Apoi, vei fi gata sa printezi."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -894,9 +894,9 @@ msgstr ""
 "automate si calibrarile?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Put. max"
 
@@ -907,38 +907,38 @@ msgid "Homing"
 msgstr "Homing"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Vent. hotend:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Voi rula calibrarea XYZ acum. Va dura aprox. 12 minute."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Voi rula calibrarea Z acum."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER NU REVINE"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER NU SE MISCA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "INSTRUMENT INVALID"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -952,29 +952,29 @@ msgid "Improving bed calibration point"
 msgstr "Imbunatatirea punctului de calibrare al patului"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Ecran informatii"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. card SD"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Incarca filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr "Infige filamentul (nu-l incarca) in extruder si apasa butonul."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -983,14 +983,14 @@ msgstr ""
 "firmwarul. Daca problema persista, contactati dep. support"
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Este filamentul incarcat?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Este suprafata de print pe pat?"
 
@@ -1000,124 +1000,124 @@ msgid "Iteration"
 msgstr "Iteratie"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Ultimul print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Err. ultimului print"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Stanga"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Vent. hotend?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Stanga [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Lum. maxim"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Lum. minim"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Corectie lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Reglare Z live"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Incarca toate"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Incarca filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Incarc la extruder"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Incarca la varf"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Incarcare culoare"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Incarcare filament"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Fulie slabita"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Tare"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU UPDATE NECESAR"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Intermal MMU ERR, Va rog resetati MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "Mod MMU"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NU RASPUNDE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU: Restabilirea temperaturii..."
 
@@ -1128,18 +1128,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU AUTOTEST. ESUATA"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Erori MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "Err. incarc MMU"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1148,7 +1148,7 @@ msgstr ""
 "problema persista, contactati dep. support"
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1157,108 +1157,109 @@ msgstr ""
 "persista, contactati dep. support"
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 conectat"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Comp. magneti"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Meniu principal"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Distorsiune"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Masurare distanta de referinta pentru punctul de calib."
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Mesh"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Calibrare mesh"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mod"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Schimbare mod in progres..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Mai multe detalii online"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Miscare X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Miscare Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Miscare Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Miscare axe"
 
@@ -1270,10 +1271,10 @@ msgstr "Miscare selector"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/A"
 
@@ -1283,75 +1284,75 @@ msgid "New firmware version available:"
 msgstr "Vers. de firmware noua disponibila:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nu"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Fara card SD"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Fara miscare."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "N/A"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nu este conectat"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Nu se roteste"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Acum voi calibra distanta dintre varf si suprafata patului."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Acum voi preincalzi extruder-ul pentru PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Acum inlaturati printul de test de pe suprafata de print."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Varf"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Diam. varf"
 
@@ -1363,81 +1364,81 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Off"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Setari vechi detectate. PID, Esteps etc. de baza vor fi setate."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "On"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "O data"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "OPRIT THERMAL ERROR"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "Calibrare PID"
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "Calibrare PID gata"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "Calibrare PID"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Incalzire PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "Cal. PINDA"
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Calibrarea temperaturii a esuat"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1446,7 +1447,7 @@ msgstr ""
 "meniul Setari->Cal. PINDA"
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "PULLEY NU SE MISCA"
 
@@ -1457,13 +1458,13 @@ msgid "Parking selector"
 msgstr "Parcare selector"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pauza print"
 
@@ -1474,7 +1475,7 @@ msgid "Performing cut"
 msgstr "Efect. taiere"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1483,7 +1484,7 @@ msgstr ""
 "Daca varful prinde hartia, opriti imediat imprimanta."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1492,27 +1493,27 @@ msgstr ""
 "ul repornind imprimanta."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Verificati senzorul IR, scoateti filamentul daca exista."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Verificati:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Curatati patul si apoi apasati butonul pentru a continua."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Curatati varful pentru calibrare. Apasati butonul cand terminati."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
@@ -1520,7 +1521,7 @@ msgstr ""
 "incarca."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1529,50 +1530,50 @@ msgstr ""
 "pentru a-l incarca."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Va rugam incarcati filamentul mai intai."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Deschideti idler-ul si scoateti filamentul manual."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Asezati suprafata de print pe pat."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Apasati butonul pentru a scoate filamentul."
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Va rugam scoateti filamentul imediat"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Va rugam scoateti protectiile de transport mai intai."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Va rugam indepartati suprafata de print de pe pat."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Va rugam rulati calibrarea XYZ mai intai."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Va rugam mai intai sa scoateti filamentul, apoi incercati din nou."
 
@@ -1582,51 +1583,51 @@ msgid "Please upgrade."
 msgstr "Va rugam actualizati"
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Va rog asteptati"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Err. alimentare"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Preincalzire"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Preincalziti varful!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Preincalzire extruder. Asteptati, va rugam."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Preincalzire..."
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Preincalzire..."
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Preincalzire load"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Preincalzire unload"
 
@@ -1637,48 +1638,48 @@ msgid "Preparing blade"
 msgstr "Pregatire lama"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Apasati butonul"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Apasati butonul pentru a preincalzi extruder-ul si continuati."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Print anulat"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Vent. print:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Printare de pe SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Print oprit"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Durata print"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "IP imprimanta:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1701,7 +1702,7 @@ msgstr ""
 "valoarea in setari. Print anulat."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Motorul Pully sa blocat. Asigurativa ca scripetele se poate misca si "
@@ -1714,38 +1715,38 @@ msgid "Pushing filament"
 msgstr "Introducere filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "QUEUE PLIN"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "Port RPi"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Spate [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Recuperare print"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 "Scoateti filamentul vechi si apasati butonul pentru a incarca filamentul nou."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Redenumeste"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1754,29 +1755,29 @@ msgstr ""
 "Verifica G-codul ptr indexul instrum. in afara intervalului (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset."
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset. calibr. XYZ"
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Continua print"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Reluare print..."
 
@@ -1787,7 +1788,7 @@ msgid "Retract from FINDA"
 msgstr "Retract de la FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Retry"
 
@@ -1798,17 +1799,17 @@ msgid "Returning selector"
 msgstr "Returnare selector"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Dreapta"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Dreapta [μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1817,40 +1818,39 @@ msgstr ""
 "de la inceput. Continuati?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "Card SD"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECTOR NU REVINE"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECTOR NU SE MISCA"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "OPRIT."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Se cauta punctele de calibrare"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Selecteaza"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1859,31 +1859,31 @@ msgstr ""
 "ecran."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Alege extruderul:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Select. filamentul:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Selectati limba"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 "Selectati temperatura de preheat a extruder-ului pentru materialul ales."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Selectati temp. potrivita pentru materialul curent."
 
@@ -1894,62 +1894,62 @@ msgid "Selecting fil. slot"
 msgstr "Selectare slot fil."
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Testare automata OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Start Autotestare"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Testare automata"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Err. test. automata!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Autotestare esuata"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 "Testarea automata va fi rulata pentru a calibra sensorless rehoming-ul."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Info. senzori"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Senzorul a fost verificat, scoate filamentul."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Setati temperatura:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Setari"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Dist. severa"
 
@@ -1960,7 +1960,7 @@ msgid "Sheet"
 msgstr "Suprafata"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1973,18 +1973,18 @@ msgstr ""
 "%cReset."
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Stare endstop-uri"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Silent."
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Dist. usoara"
 
@@ -1998,13 +1998,13 @@ msgstr ""
 "care pot fi sortate este 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "A fost intalnita o problema, calibrarea Z a fost initiata..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Sortare"
 
@@ -2015,71 +2015,71 @@ msgid "Sorting files"
 msgstr "Sortare fisiere..."
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Sunet"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Viteza"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Se roteste"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 "Temp. ambient. stabila (21-26C) si o suprafata de lucru rigida necesare."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistici"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Silent."
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Suprafete print"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stop"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Oprire print"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Strict"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Informatii"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "inversate"
 
@@ -2088,63 +2088,53 @@ msgstr "inversate"
 msgid "THERMAL ANOMALY"
 msgstr "ANOMALIE TERMICA"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "Autotune TM esuat"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "Eroare driver TMC"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "Reset driver TMC"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "DRIVER TMC IN SCURT"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "ERR TMC supraincalz."
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "ERR subtensiune TMC"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Temp. model autotune"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatura"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperaturi"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Testare filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2152,7 +2142,7 @@ msgstr ""
 "miscarea."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2161,7 +2151,7 @@ msgstr ""
 "MMU este actualizat."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2169,7 +2159,7 @@ msgstr ""
 "blocheza miscarea."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2179,7 +2169,7 @@ msgstr ""
 "inaltimea optima. Folositi pozele din handbook (capitolul Calibration)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2188,49 +2178,49 @@ msgstr ""
 "First steps, sectiunea Calibration flow."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Data"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Timeout"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Total"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Total erori"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filament total"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Durata totala print"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Optiuni"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "DESCARCARE MANUALA"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2239,20 +2229,20 @@ msgstr ""
 "este liber. Verifica conexiune FINDA."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Unload"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Descarca filam."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Scoatere filament"
 
@@ -2269,23 +2259,23 @@ msgid "Unloading to pulley"
 msgstr "Scoatere la pully"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Verificarea a esuat, scoateti filamentul si incercati din nou."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Voltaje"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "TMC SUPRAINCALZIT"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2298,101 +2288,93 @@ msgstr ""
 "modul silentios"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Se asteapta..."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Se asteapta racirea probei PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Se ateapta racirea extruder-ului si a patului"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Avert."
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Atentie: tipul imprimantei si al placii de baza s-a schimbat."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Atentie: tipul placii de baza s-a schimbat."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Atentie: tipul imprimantei s-a schimbat."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Filamentul a fost scos cu succes?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Eroare de cablare"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Wizard"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Corect. X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "Init XFLASH"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "Detalii cal. XYZ"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "Calibrarea XYZ in regula. Distorsiunea va fi corectata automat."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 "Calibrarea XYZ in regula. Axele X/Y sunt distorsionate putin. Felicitari!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 "Calibrarea XYZ compromisa. Punctele de calibrare din fata nu pot fi atinse."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-"Calibrarea XYZ compromisa. Punctele de calibrare din fata stanga nu pot fi "
-"atinse."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
@@ -2400,106 +2382,107 @@ msgstr ""
 "atinse."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 "Calibrarea XYZ a esuat. Un punct de calibrare a patului nu a fost gasit."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 "Calibrarea XYZ a esuat. Punctele de calibrare din fata nu pot fi atinse."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-"Calibrarea XYZ a esuat. Punctul de calibrare stanga fata nu poate fi atinsa."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Calibrarea XYZ a esuat. Va rugam consultati manualul."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 "Calibrarea XYZ a esuat. Punctele de calibrare din fata dreapta nu pot fi "
 "atinse."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Calibrarea XYZ ok. Axele X/Y sunt perpendiculare. Felicitari!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Distanta Y de la min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Corect. Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Da"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Puteti oricand sa reluati Wizard-ul din Calibrare -> Wizard."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Corect. Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Nr. Z-probe"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] offset origine"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "si apasa butonul"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "a incarca filament"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "a scoate filament"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "necunoscut"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "vers. necunoscuta"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Reimprospata"
 
@@ -2565,6 +2548,23 @@ msgstr "🔃Reimprospata"
 #~ msgid "Press the knob to resume nozzle temperature."
 #~ msgstr "Apasati butonul pentru a restabili temperatura extruder-ului."
 
+#~ msgid "TM autotune failed"
+#~ msgstr "Autotune TM esuat"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Temp. model autotune"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "Calibrarea XYZ compromisa. Punctele de calibrare din fata stanga nu pot "
+#~ "fi atinse."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "Calibrarea XYZ a esuat. Punctul de calibrare stanga fata nu poate fi "
+#~ "atinsa."
+
 #~ msgid ""
 #~ "You are using firmware alpha version. This is development version. Using "
 #~ "this version is not recommended and may cause printer damage."

lang/po/Firmware_sk.po

@@ -16,94 +16,94 @@ msgstr ""
 "X-Poedit-SourceCharset: UTF-8\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 a starsie"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 a novsie"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "Ocakavana verzia %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Zrusit"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Doladenie Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Vsetko OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Vsetko je hotove!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Abeceda"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Vzdy"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Okolie"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Dosli oba Z voziky k hornemu dorazu?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto home"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Automat."
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autozav. filamentu"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -116,50 +116,50 @@ msgid "Avoiding grind"
 msgstr "Avoiding grind"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Os"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Dlzka osi"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Spat"
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Podlozka"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Zahrievanie podlozky"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Podlozka OK."
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Korekcia podlozky"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -170,55 +170,55 @@ msgstr ""
 "Kalibracia Z zlyhala. Sensor nezopol. Znecistena tryska? Cakam na reset."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Podlozka/Zohrievanie"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Stav remena"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Test remena"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Nastal vypadok prudu. Obnovit tlac?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Jasne"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Podsvietenie"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "COMMUNICATION ERROR"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibracia XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibrovat Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -227,13 +227,13 @@ msgstr ""
 "tlacidlom."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibrujem Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -242,142 +242,142 @@ msgstr ""
 "tlacidlom."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibr. vychodziu p."
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibracia"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibracia OK"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Selektor alebo Idler nie je mozne presunut."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 "Nie je mozne vykonat akciu, filament je uz zavedeny. Najskor ho vytiahnite."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Karta vysunuta"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Zmenit SD kartu"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Vymenit filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Vymena uspesna!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Vymena ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Kontrola osi X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Kontrola osi Y"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Kontrola osi Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Kontrola podlozky"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Kontrola endstopu"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Kontrolujem subor"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Kontrola hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Kontrola senzorov"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Kontroly"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Nespravna farba"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Komunitny prekl."
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Pokr."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Schladit"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Kopirovat vybrany jazyk?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Naraz"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Det. narazu"
 
@@ -387,7 +387,7 @@ msgid "Crash detected."
 msgstr "Zisteny naraz."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -398,34 +398,34 @@ msgstr ""
 "Normalnom rezime"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Odstrihnut filam."
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Strihanie"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Tmavy"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Vypnut"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Vypnut motory"
 
@@ -437,7 +437,7 @@ msgid "Disengaging idler"
 msgstr "Uvolnenie idlera"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -448,7 +448,7 @@ msgstr ""
 "manualu, kapitola Zaciname, odstavec Nastavenie prvej vrstvy."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -457,12 +457,12 @@ msgstr ""
 "podlozkou?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Hotov"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "Korekcia E:"
 
@@ -491,13 +491,13 @@ msgid "ERR Wait for User"
 msgstr "ERR Wait for User"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "ERROR:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Vysunut fil."
 
@@ -509,17 +509,17 @@ msgid "Ejecting filament"
 msgstr "Vysunutie filamentu"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Koncovy spinac"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Kon. spinac nezopol"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Konc. spinace"
 
@@ -531,47 +531,47 @@ msgid "Engaging idler"
 msgstr "Zapojenie idlera"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Extruder info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autozav."
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F. zasek"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "F. vypadok"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "FILAMENT ALREADY LOA"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA DIDNT TRIGGER"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
@@ -580,7 +580,7 @@ msgstr ""
 "ze filament sa moze hybat a FINDA funguje."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
@@ -589,67 +589,67 @@ msgstr ""
 "spravne."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. STUCK"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS Akcia"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR DIDNT TRIGG."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR TOO EARLY"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR: FIL. STUCK"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME ERROR"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Statistiky zlyhani"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Zlyhania MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Falosne spustenie"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Rychlost vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Test ventilatora"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Kontr. vent."
 
@@ -678,45 +678,45 @@ msgid "Feeding to nozzle"
 msgstr "Zavedenie do trysky"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Vypadky filam."
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. senzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Filament vytlaceny a spravnej farby?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Filament nezavedeny"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Senzor filamentu"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
@@ -725,7 +725,7 @@ msgstr ""
 "filament moze hybat a senzor funguje spravne."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
@@ -734,7 +734,7 @@ msgstr ""
 "filament dosiahol fsenzor a senzor funguje  spravne."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
@@ -743,52 +743,52 @@ msgstr ""
 "ci je PTFE trubicka priechodzia a senzor funguje spravne."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Spotrebovany filam."
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Subor nekompletny. Pokracovat?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Dokoncovanie pohybu"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Kal. prvej vrstvy"
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 "Najskor pomocou selftestu skontrolujem nejcastejsie chyby vznikajuce pri "
 "zostaveni tlaciarne."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Prietok"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Predny tlacovy vent?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Predna st.[μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Predny/lavy vent."
 
@@ -836,42 +836,42 @@ msgstr ""
 "zrusena."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "G-code"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW nastavenie"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Zohr./Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Zahrievanie"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Zohrievanie prerusene bezpecnostnym casovacom."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Zahrievanie OK."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -881,7 +881,7 @@ msgstr ""
 "nastavenia, v ktorom skalibrujem os Z. Potom budete moct zacat tlacit."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -890,9 +890,9 @@ msgstr ""
 "previedla kalibracnym procesom?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Vys. vykon"
 
@@ -903,38 +903,38 @@ msgid "Homing"
 msgstr "Navrat"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend vent.:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr "Teraz urobim XYZ kalibraciu. Zaberie to priblizne 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Teraz urobim kalibraciu Z."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER CANNOT HOME"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER CANNOT MOVE"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "INVALID TOOL"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -948,29 +948,29 @@ msgid "Improving bed calibration point"
 msgstr "Zlepsenie bodu kalibracie podlozky"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Informacie"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Nacitanie SD karty"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Vlozte filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr "Vlozte filament (nezavadzajte) do extruderu a stlacte tlacidlo"
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
@@ -979,14 +979,14 @@ msgstr ""
 "pretrvava, kontaktujte podporu."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Je filament zavedeny?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Je platna na podlozke?"
 
@@ -996,124 +996,124 @@ msgid "Iteration"
 msgstr "Opakovanie"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Posledna tlac"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Zlyhanie posl. tlace"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Vlavo"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Lavy vent na tryske?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Lava str.[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Normalne"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Stlmene"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Korekcia lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Doladenie osi Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Zaviest vsetko"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Zaviest filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Zaviest do extr."
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Zaved. do trysky"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Cistenie farby"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Zavedenie filamentu"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Uvolnena remenica"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Hlasny"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE NEEDED"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "Chyba MMU Firmwaru, resetujte MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU mod"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU NOT RESPONDING"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU: Obnovenie teploty..."
 
@@ -1124,18 +1124,18 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SAMOTEST ZLYHAL"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "Zlyhanie MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU zlyhalo"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
@@ -1144,7 +1144,7 @@ msgstr ""
 "pretrvava, kontaktujte podporu."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
@@ -1153,108 +1153,109 @@ msgstr ""
 "kontaktujte podporu."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 pripojene"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Komp. magnetu"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Hlavna ponuka"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Merane skos."
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Meriam referencnu vysku kalibracneho bodu"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Mriezka"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Vyrovnanie podl."
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mod"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Prebieha zmena modu..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Model"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Viac podrobnosti online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Posunut X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Posunut Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Posunut Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Posunut os"
 
@@ -1266,10 +1267,10 @@ msgstr "Presun selektora"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/A"
 
@@ -1279,75 +1280,75 @@ msgid "New firmware version available:"
 msgstr "Vysla nova verzia firmware:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nie"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Ziadna SD karta"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Bez pohybu."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Ziadne"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Nezapojene"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Netoci sa"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr "Teraz skalibrujem vzdialenost medzi koncom trysky a povrchom podlozky."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Teraz predohrejem trysku pre PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Teraz odstrante testovaci vytlacok z platne."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Tryska"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Tryska"
 
@@ -1359,81 +1360,81 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Vyp"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Neplatne hodnoty nastavenia. Bude pouzite predvolene PID, Esteps atd."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "Zap"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "Raz"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSED THERMAL ERROR"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kal."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kal. ukoncena"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibracia"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "Nahrievanie PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "Kalibracia PINDA zlyhala"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
@@ -1442,7 +1443,7 @@ msgstr ""
 "menu Nastavenia->PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "PULLEY CANNOT MOVE"
 
@@ -1453,13 +1454,13 @@ msgid "Parking selector"
 msgstr "Parkovanie selektora"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pozastavit tlac"
 
@@ -1470,7 +1471,7 @@ msgid "Performing cut"
 msgstr "Strihanie"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1480,7 +1481,7 @@ msgstr ""
 "tlacidlom X."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1489,35 +1490,35 @@ msgstr ""
 "restartovanim tlaciarne."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Prosim skontrolujte zapojenie IR senzoru a vyberte filament"
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Skontrolujte:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Prosim ocistite podlozku a stlacte tlacidlo."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Pre uspesnu kalibraciu ocistite prosim tlacovu trysku. Potvrdte tlacidlom."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 "Prosim vlozte filament do extruderu a stlacte tlacidlo k jeho zavedeniu"
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1526,50 +1527,50 @@ msgstr ""
 "zavedeniu"
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Prosim najskor zavedte filament"
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Prosim otvorte idler a manualne odstrante filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Umiestnite prosim platnu na podlozku"
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Pre vysunutie filamentu stlacte tlacidlo"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Prosim vyberte urychlene filament"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Najskor prosim odstrante prevozne pomocky."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Odstrante prosim platnu z podlozky."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Najskor spustite kalibraciu XYZ."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Prosim vyberte filament a zopakujte tuto akciu"
 
@@ -1579,51 +1580,51 @@ msgid "Please upgrade."
 msgstr "Aktualizujte prosim."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Cakajte prosim"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Vypadky prudu"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Predohrev"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Predohrejte trysku!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Predhrev trysky. Prosim cakajte."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Predohrev k strihu"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Predhrev k vysunutiu"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Predhrev k zavedeniu"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Predohrev k vybratiu"
 
@@ -1634,48 +1635,48 @@ msgid "Preparing blade"
 msgstr "Priprava cepele"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Stlacte tlacidlo"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Pre nahriatie trysky a pokracovanie stlacte tlacidlo."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Tlac prerusena"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Tlacovy vent.:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Tlac z SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Tlac pozastavena"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Cas tlace"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "IP adr. tlaciarne:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1698,7 +1699,7 @@ msgstr ""
 "Tlac zrusena."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 "Motor remenice sa zasekol. Skontrolujte, ze sa remenica moze hybat a jej "
@@ -1711,37 +1712,37 @@ msgid "Pushing filament"
 msgstr "Tlacenie filamentu"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "QUEUE FULL"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Zadna str.[μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Obnovovanie tlace"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr "Vyberte stary filament a stlacte tlacidlo pre zavedenie noveho."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Premenovat"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
@@ -1750,29 +1751,29 @@ msgstr ""
 "nastroj mimo rozsah (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Reset"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Pokracovat"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Obnovenie tlace"
 
@@ -1783,7 +1784,7 @@ msgid "Retract from FINDA"
 msgstr "Vybrat z FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Znova"
 
@@ -1794,17 +1795,17 @@ msgid "Returning selector"
 msgstr "Navrat selektora"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Vpravo"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Prava str.[μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
@@ -1813,70 +1814,69 @@ msgstr ""
 "kalibracny proces od zaciatku. Pokracovat?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD karta"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "SELECTOR CANNOT HOME"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "SELECTOR CANNOT MOVE"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "ZASTAVENE."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Hladam kalibracny bod podlozky"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Vybrat"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr "Zvolte filament pre kalibraciu prvej vrstvy z nasledujuceho menu"
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Zvolte extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Zvolte filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Vyber jazyka"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr "Vyberte teplotu predohrevu trysky ktora zodpoveda vasmu materialu."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Zvolte teplotu, ktora odpoveda vasmu materialu."
 
@@ -1887,61 +1887,61 @@ msgid "Selecting fil. slot"
 msgstr "Vyber slotu fil."
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Samotest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Zaciatok testu"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Samotest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Chyba samotestu!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Samotest zlyhal"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr "Bude spusteny test pre kalibraciu presneho navratu."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Senzor info"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Senzor overeny, vyberte filament."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Nastavte teplotu:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Nastavenia"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Tazke skos."
 
@@ -1952,7 +1952,7 @@ msgid "Sheet"
 msgstr "Platna"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1965,18 +1965,18 @@ msgstr ""
 "%cReset"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Stav konc. spin."
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Tichy"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Lahke skos."
 
@@ -1990,13 +1990,13 @@ msgstr ""
 "zoradenie je 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Vyskytol sa problem, zarovnam os Z ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Triedit"
 
@@ -2007,70 +2007,70 @@ msgid "Sorting files"
 msgstr "Triedenie suborov"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Zvuk"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Rychlost"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Toci sa"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr "Je vyzadovana stabilna izbova teplota 21-26C a pevna podlozka."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Tichy"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Platne"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Zast."
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Zastavit tlac"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Prisne"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Podpora"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Prehodene"
 
@@ -2079,70 +2079,60 @@ msgstr "Prehodene"
 msgid "THERMAL ANOMALY"
 msgstr "THERMAL ANOMALY"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM autotune failed"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER ERROR"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER SHORTED"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC OVERHEAT ERROR"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNDERVOLTAGE ERR"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Autom. nast. teploty"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Teplota"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Teploty"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Kontrola filamentu"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 "Idler sa nemoze vratit na miesto. Skontrolujte ci nieco neblokuje jeho pohyb."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
@@ -2151,7 +2141,7 @@ msgstr ""
 "MMU firmwaru."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2159,7 +2149,7 @@ msgstr ""
 "pohyb."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2169,7 +2159,7 @@ msgstr ""
 "vysku. Postupujte podla obrazku v handbooku (kapitola Kalibracia)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2178,49 +2168,49 @@ msgstr ""
 "Zaciname, sekcia Postup kalibracie."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Cas"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Casovac"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Celkom"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Celkom zlyhani"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Filament celkom"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Celkovy cas tlace"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Ladit"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "UNLOAD MANUALLY"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
@@ -2229,20 +2219,20 @@ msgstr ""
 "selektor je volny. Skontrolujte pripojenie FINDA."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Vysuv"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Vybrat filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Vysuvanie filamentu"
 
@@ -2259,23 +2249,23 @@ msgid "Unloading to pulley"
 msgstr "Vysuv. do remenice"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Overenie zlyhalo, vyberte filament a skuste znovu."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Napatie"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "WARNING TMC TOO HOT"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2288,199 +2278,195 @@ msgstr ""
 "Tichom rezime"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Caka sa na uzivatela"
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Caka sa na ochladenie PINDA"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Cakanie na schladenie trysky a podlozky."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Varovat"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Varovanie: doslo k zmene typu tlaciarne a maticnej dosky."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Varovanie: doslo k zmene typu maticnej dosky."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Varovanie: doslo k zmene typu tlaciarne."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Bolo vysunutie filamentu uspesne?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Chyba zapojenia"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Sprievodca"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "Korekcia X:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "Detaily XYZ kal."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 "Kalibracia XYZ v poriadku. Skosenie bude automaticky vyrovnane pri tlaci."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "Kalibracia XYZ v poriadku. X/Y osi mierne skosene. Dobra praca!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "Kalibracia XYZ je nepresna. Predne kalibracne body su nedostupne."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr "Kalibracia XYZ je nepresna. Lavy predny bod je nedostupny."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr "Kalibracia XYZ je nepresna. Pravy predny bod je nedostupny."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "Kalibracia XYZ zlyhala. Kalibracny bod podlozky nenajdeny."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "Kalibracia XYZ zlyhala. Predne kalibracne body su nedostupne."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr "Kalibracia XYZ zlyhala. Lavy predny bod je nedostupny"
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Kalibracia XYZ zlyhala. Nahliadnite do manualu."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr "Kalibracia XYZ zlyhala. Pravy predny bod je nedostupny."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "Kalibracia XYZ v poradku. X/Y osi su kolme. Gratulujeme!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y vzdialenost od min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Korekcia Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Ano"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Sprievodcu mozete kedykolvek znovu spustit z menu Kalibracia -> Sprievodca"
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Korekcia Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Pocet merani Z"
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] odsadenie bodu"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "a stlacte tlacidlo"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "k zavedeniu filam."
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "k vybraniu filamentu"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "neznamy"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "neznamy stav"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Obnovit"
 
@@ -2546,6 +2532,19 @@ msgstr "🔃Obnovit"
 #~ msgid "Press the knob to resume nozzle temperature."
 #~ msgstr "Pre pokracovanie nahrievania trysky stlacte tlacidlo."
 
+#~ msgid "TM autotune failed"
+#~ msgstr "TM autotune failed"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Autom. nast. teploty"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr "Kalibracia XYZ je nepresna. Lavy predny bod je nedostupny."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr "Kalibracia XYZ zlyhala. Lavy predny bod je nedostupny"
+
 #~ msgid ""
 #~ "You are using firmware alpha version. This is development version. Using "
 #~ "this version is not recommended and may cause printer damage."

lang/po/Firmware_sl.po

@@ -16,94 +16,94 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr ""
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ""
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr ""
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr ""
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr ""
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr ""
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr ""
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
+#: ../../Firmware/ultralcd.cpp:2294
 msgid ""
 "Autoloading filament is active, just press the knob and insert filament..."
 msgstr ""
@@ -115,50 +115,50 @@ msgid "Avoiding grind"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr ""
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr ""
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr ""
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -168,209 +168,209 @@ msgid ""
 msgstr ""
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr ""
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr ""
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr ""
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr ""
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr ""
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr ""
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr ""
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr ""
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr ""
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr ""
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr ""
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr ""
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr ""
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr ""
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr ""
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr ""
 
@@ -380,7 +380,7 @@ msgid "Crash detected."
 msgstr ""
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -388,34 +388,34 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr ""
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr ""
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr ""
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr ""
 
@@ -427,7 +427,7 @@ msgid "Disengaging idler"
 msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -436,19 +436,19 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
 msgstr ""
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr ""
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr ""
 
@@ -477,13 +477,13 @@ msgid "ERR Wait for User"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr ""
 
@@ -495,17 +495,17 @@ msgid "Ejecting filament"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr ""
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr ""
 
@@ -517,121 +517,121 @@ msgid "Engaging idler"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr ""
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr ""
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr ""
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr ""
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr ""
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr ""
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr ""
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr ""
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr ""
 
@@ -660,109 +660,109 @@ msgid "Feeding to nozzle"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr ""
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
 msgstr ""
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr ""
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr ""
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
 msgstr ""
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr ""
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr ""
 
@@ -805,42 +805,42 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr ""
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr ""
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -848,7 +848,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -857,9 +857,9 @@ msgstr ""
 "skozi postopek nastavitve?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr ""
 
@@ -870,38 +870,38 @@ msgid "Homing"
 msgstr ""
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr ""
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
 msgstr ""
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr ""
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr ""
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
@@ -913,43 +913,43 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr ""
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr ""
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr ""
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
 msgstr ""
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
@@ -959,124 +959,124 @@ msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr ""
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr ""
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr ""
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr ""
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr ""
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr ""
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr ""
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr ""
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr ""
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr ""
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr ""
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr ""
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr ""
 
@@ -1087,133 +1087,134 @@ msgid "MMU SELFTEST FAILED"
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1187
-#: ../../Firmware/ultralcd.cpp:1215
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr ""
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
 msgstr ""
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr ""
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr ""
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr ""
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr ""
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr ""
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr ""
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr ""
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr ""
 
@@ -1225,10 +1226,10 @@ msgstr ""
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr ""
 
@@ -1238,75 +1239,75 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr ""
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr ""
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr ""
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr ""
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr ""
 
@@ -1318,88 +1319,88 @@ msgstr ""
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr ""
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr ""
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr ""
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr ""
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr ""
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr ""
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr ""
 
@@ -1410,13 +1411,13 @@ msgid "Parking selector"
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr ""
 
@@ -1427,97 +1428,97 @@ msgid "Performing cut"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
 msgstr ""
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr ""
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr ""
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
+#: ../../Firmware/ultralcd.cpp:3904
 msgid ""
 "Please insert filament into the extruder, then press the knob to load it."
 msgstr ""
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
 msgstr ""
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr ""
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr ""
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr ""
 
@@ -1527,51 +1528,51 @@ msgid "Please upgrade."
 msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr ""
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr ""
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr ""
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr ""
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr ""
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr ""
 
@@ -1582,48 +1583,48 @@ msgid "Preparing blade"
 msgstr ""
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr ""
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr ""
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr ""
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr ""
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1642,7 +1643,7 @@ msgid ""
 msgstr ""
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
 msgstr ""
 
@@ -1653,66 +1654,66 @@ msgid "Pushing filament"
 msgstr ""
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr ""
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr ""
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr ""
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
 msgstr ""
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr ""
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr ""
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr ""
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr ""
 
@@ -1723,7 +1724,7 @@ msgid "Retract from FINDA"
 msgstr ""
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr ""
 
@@ -1734,87 +1735,86 @@ msgid "Returning selector"
 msgstr ""
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr ""
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr ""
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr ""
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr ""
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr ""
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr ""
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr ""
 
@@ -1825,61 +1825,61 @@ msgid "Selecting fil. slot"
 msgstr ""
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr ""
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr ""
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr ""
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr ""
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
 msgstr ""
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr ""
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr ""
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr ""
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr ""
 
@@ -1890,7 +1890,7 @@ msgid "Sheet"
 msgstr ""
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1899,18 +1899,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr ""
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr ""
 
@@ -1922,13 +1922,13 @@ msgid ""
 msgstr ""
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr ""
 
@@ -1939,70 +1939,70 @@ msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr ""
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr ""
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr ""
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr ""
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr ""
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr ""
 
@@ -2011,82 +2011,72 @@ msgstr ""
 msgid "THERMAL ANOMALY"
 msgstr ""
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr ""
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr ""
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr ""
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr ""
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr ""
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr ""
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr ""
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr ""
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr ""
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2094,76 +2084,76 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr ""
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr ""
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr ""
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr ""
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr ""
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
 msgstr ""
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr ""
 
@@ -2180,23 +2170,23 @@ msgid "Unloading to pulley"
 msgstr ""
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr ""
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr ""
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr ""
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2205,196 +2195,192 @@ msgid ""
 msgstr ""
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr ""
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr ""
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr ""
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr ""
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr ""
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr ""
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr ""
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr ""
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr ""
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr ""
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr ""
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr ""
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr ""
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr ""
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr ""
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr ""
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr ""
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr ""
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr ""
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr ""
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_sv.po

@@ -16,95 +16,98 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/Filament_sensor.cpp:287
-#: ../../Firmware/Filament_sensor.cpp:362 ../../Firmware/messages.cpp:165
+#: ../../Firmware/Filament_sensor.cpp:289
+#: ../../Firmware/Filament_sensor.cpp:366 ../../Firmware/messages.cpp:165
 msgid " 0.3 or older"
 msgstr " 0.3 el äldre"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/Filament_sensor.cpp:289
-#: ../../Firmware/Filament_sensor.cpp:365 ../../Firmware/messages.cpp:164
+#: ../../Firmware/Filament_sensor.cpp:291
+#: ../../Firmware/Filament_sensor.cpp:369 ../../Firmware/messages.cpp:164
 msgid " 0.4 or newer"
 msgstr " 0.4 el nyare"
 
 #. MSG_SELFTEST_FS_LEVEL c=20
-#: ../../Firmware/ultralcd.cpp:7035
+#: ../../Firmware/ultralcd.cpp:7017
 msgid "%s level expected"
 msgstr "%s nivå förväntad"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1980
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1973
+#: ../../Firmware/ultralcd.cpp:3795
 msgid ">Cancel"
 msgstr ">Avbryt"
 
 #. MSG_BABYSTEPPING_Z c=15
 #. Beware: must include the ':' as its last character
-#: ../../Firmware/ultralcd.cpp:2668
+#: ../../Firmware/ultralcd.cpp:2661
 msgid "Adjusting Z:"
 msgstr "Justerar Z:"
 
 #. MSG_SELFTEST_CHECK_ALLCORRECT c=20
-#: ../../Firmware/ultralcd.cpp:7311
+#: ../../Firmware/ultralcd.cpp:7293
 msgid "All correct"
 msgstr "Allt korrekt"
+
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4133
-#: ../../Firmware/ultralcd.cpp:4142
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4122
+#: ../../Firmware/ultralcd.cpp:4131
 msgid "All is done. Happy printing!"
 msgstr "Allt är klart. God utskrift!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4402
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4781
 msgid "Alphabet"
 msgstr "Alfabet"
 
 #. MSG_ALWAYS c=6
-#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4287
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4276
 msgid "Always"
 msgstr "Alltid"
 
 #. MSG_AMBIENT c=14
-#: ../../Firmware/ultralcd.cpp:1406
+#: ../../Firmware/ultralcd.cpp:1399
 msgid "Ambient"
 msgstr "Omgivande"
 
 #. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2981
+#: ../../Firmware/ultralcd.cpp:2974
 msgid "Are left and right Z~carriages all up?"
 msgstr "Är båda Z-vagnarna helt uppe?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4457
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4415
 msgid "Assist"
 msgstr "Assist"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:161 ../../Firmware/ultralcd.cpp:5836
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3261 ../../Firmware/messages.cpp:9
-#: ../../Firmware/ultralcd.cpp:4871
+#: ../../Firmware/Marlin_main.cpp:3258 ../../Firmware/messages.cpp:9
+#: ../../Firmware/ultralcd.cpp:4842
 msgid "Auto home"
 msgstr "Auto hem"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:5777
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:5751
 msgid "Auto power"
 msgstr "Auto kraft"
 
 #. MSG_AUTOLOAD_FILAMENT c=18
-#: ../../Firmware/ultralcd.cpp:5584
+#: ../../Firmware/ultralcd.cpp:5558
 msgid "AutoLoad filament"
 msgstr "Autoladda filament"
 
 #. MSG_AUTOLOADING_ENABLED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2301
-msgid "Autoloading filament is active, just press the knob and insert filament..."
-msgstr "Autoladdning av filament är aktiv, tryck på knappen och sätt i filament."
+#: ../../Firmware/ultralcd.cpp:2294
+msgid ""
+"Autoloading filament is active, just press the knob and insert filament..."
+msgstr ""
+"Autoladdning av filament är aktiv, tryck på knappen och sätt i filament."
 
 #. MSG_PROGRESS_AVOID_GRIND c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:16
@@ -113,48 +116,50 @@ msgid "Avoiding grind"
 msgstr "Undviker slipning"
 
 #. MSG_SELFTEST_AXIS c=16
-#: ../../Firmware/ultralcd.cpp:7014
+#: ../../Firmware/ultralcd.cpp:6996
 msgid "Axis"
 msgstr "Axel"
 
 #. MSG_SELFTEST_AXIS_LENGTH c=20
-#: ../../Firmware/ultralcd.cpp:7013
+#: ../../Firmware/ultralcd.cpp:6995
 msgid "Axis length"
 msgstr "Axellängd"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2749
-#: ../../Firmware/ultralcd.cpp:4223 ../../Firmware/ultralcd.cpp:5859
-#: ../../Firmware/ultralcd.cpp:7826
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:2742
+#: ../../Firmware/ultralcd.cpp:4212 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/ultralcd.cpp:7812
 msgid "Back"
 msgstr "Tillbaka"
+
 #. MSG_BED c=13
-#: ../../Firmware/Marlin_main.cpp:2029 ../../Firmware/Marlin_main.cpp:4792
-#: ../../Firmware/Marlin_main.cpp:4844 ../../Firmware/messages.cpp:12
-#: ../../Firmware/ultralcd.cpp:1404 ../../Firmware/ultralcd.cpp:5734
-#: ../../Firmware/ultralcd.cpp:5889
+#: ../../Firmware/Marlin_main.cpp:2025 ../../Firmware/Marlin_main.cpp:4789
+#: ../../Firmware/Marlin_main.cpp:4841 ../../Firmware/messages.cpp:12
+#: ../../Firmware/ultralcd.cpp:1397 ../../Firmware/ultralcd.cpp:5708
+#: ../../Firmware/ultralcd.cpp:5863
 msgid "Bed"
 msgstr "Bädd"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6293 ../../Firmware/messages.cpp:14
-#: ../../Firmware/ultralcd.cpp:585
+#: ../../Firmware/Marlin_main.cpp:6290 ../../Firmware/messages.cpp:14
+#: ../../Firmware/ultralcd.cpp:569
 msgid "Bed Heating"
 msgstr "Bädden värms upp"
+
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6331 ../../Firmware/messages.cpp:13
-#: ../../Firmware/ultralcd.cpp:588
+#: ../../Firmware/Marlin_main.cpp:6328 ../../Firmware/messages.cpp:13
+#: ../../Firmware/ultralcd.cpp:572
 msgid "Bed done"
 msgstr "Bädd klar"
 
 #. MSG_BED_CORRECTION_MENU c=18
-#: ../../Firmware/ultralcd.cpp:4883
+#: ../../Firmware/ultralcd.cpp:4854
 msgid "Bed level correct"
 msgstr "Bäddnivå korrekt"
 
 #. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:2209 ../../Firmware/Marlin_main.cpp:2985
-#: ../../Firmware/Marlin_main.cpp:2995
+#: ../../Firmware/Marlin_main.cpp:2206 ../../Firmware/Marlin_main.cpp:2982
+#: ../../Firmware/Marlin_main.cpp:2992
 #: ../../Firmware/mesh_bed_calibration.cpp:2858
 #: ../../Firmware/mesh_bed_calibration.cpp:2866
 #: ../../Firmware/mesh_bed_calibration.cpp:2892 ../../Firmware/messages.cpp:15
@@ -162,70 +167,74 @@ msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
 msgstr ""
-"Bäddnivelleringen felade. Sensorn utlöstes inte. Skräp på munstycket? Väntar på återställning."
+"Bäddnivelleringen felade. Sensorn utlöstes inte. Skräp på munstycket? Väntar "
+"på återställning."
 
 #. MSG_SELFTEST_BEDHEATER c=20
-#: ../../Firmware/ultralcd.cpp:6971
+#: ../../Firmware/ultralcd.cpp:6953
 msgid "Bed/Heater"
 msgstr "Bädd/Värmare"
+
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1457
-#: ../../Firmware/ultralcd.cpp:1726
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1450
+#: ../../Firmware/ultralcd.cpp:1719
 msgid "Belt status"
 msgstr "Bält status"
 
 #. MSG_BELTTEST c=18
-#: ../../Firmware/ultralcd.cpp:4873
+#: ../../Firmware/ultralcd.cpp:4844
 msgid "Belt test"
 msgstr "Bält test"
 
 #. MSG_RECOVER_PRINT c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:1585 ../../Firmware/Marlin_main.cpp:1607
+#: ../../Firmware/Marlin_main.cpp:1581 ../../Firmware/Marlin_main.cpp:1603
 #: ../../Firmware/messages.cpp:81
 msgid "Blackout occurred. Recover print?"
 msgstr "Blackout inträffat. Återställa utskr?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:159 ../../Firmware/ultralcd.cpp:5836
 msgid "Bright"
 msgstr "Ljus"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4821
-#: ../../Firmware/ultralcd.cpp:5787
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:4792
+#: ../../Firmware/ultralcd.cpp:5761
 msgid "Brightness"
 msgstr "Ljusstyrka"
 
 #. MSG_TITLE_COMMUNICATION_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:147 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:154 ../../Firmware/mmu2/errors_list.h:195
 msgid "COMMUNICATION ERROR"
 msgstr "KOMMUNIKATIONSFEL"
 
 #. MSG_CALIBRATE_BED c=18
-#: ../../Firmware/ultralcd.cpp:4877
+#: ../../Firmware/ultralcd.cpp:4848
 msgid "Calibrate XYZ"
 msgstr "Kalibrera XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4879
+#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:4850
 msgid "Calibrate Z"
 msgstr "Kalibrera Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2944
+#: ../../Firmware/ultralcd.cpp:2937
 msgid ""
 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
 msgstr ""
-"Kalibrerar XYZ. Vrid vredet för att flytta Z-vagnarna upp till ändstoppen. Klicka när du är klar."
+"Kalibrerar XYZ. Vrid vredet för att flytta Z-vagnarna upp till ändstoppen. "
+"Klicka när du är klar."
+
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2166 ../../Firmware/messages.cpp:19
-#: ../../Firmware/ultralcd.cpp:633
+#: ../../Firmware/Marlin_main.cpp:2162 ../../Firmware/messages.cpp:19
+#: ../../Firmware/ultralcd.cpp:619
 msgid "Calibrating Z"
 msgstr "Kalibrerar Z"
 
 #. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
-#: ../../Firmware/ultralcd.cpp:2943
+#: ../../Firmware/ultralcd.cpp:2936
 msgid ""
 "Calibrating Z. Rotate the knob to move the Z carriage up to the end "
 "stoppers. Click when done."
@@ -234,140 +243,141 @@ msgstr ""
 "Klicka när du är klar."
 
 #. MSG_CALIBRATING_HOME c=20
-#: ../../Firmware/ultralcd.cpp:7313
+#: ../../Firmware/ultralcd.cpp:7295
 msgid "Calibrating home"
 msgstr "Kalibrerar hem"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5594
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:5568
 msgid "Calibration"
 msgstr "Kalibrering"
 
 #. MSG_HOMEYZ_DONE c=20
-#: ../../Firmware/ultralcd.cpp:644
+#: ../../Firmware/ultralcd.cpp:630
 msgid "Calibration done"
 msgstr "Kalibraring utförd"
 
 #. MSG_DESC_CANNOT_MOVE c=20 r=4
-#: ../../Firmware/mmu2/errors_list.h:203 ../../Firmware/mmu2/errors_list.h:243
-#: ../../Firmware/mmu2/errors_list.h:245
+#: ../../Firmware/mmu2/errors_list.h:213 ../../Firmware/mmu2/errors_list.h:253
+#: ../../Firmware/mmu2/errors_list.h:255
 msgid "Can't move Selector or Idler."
 msgstr "Kan inte flytta väljaren eller Idlern."
 
 #. MSG_DESC_FILAMENT_ALREADY_LOADED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:228 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:238 ../../Firmware/mmu2/errors_list.h:279
 msgid "Cannot perform the action, filament is already loaded. Unload it first."
 msgstr "Kan inte utföra åtgärden, filament är redan laddat. Ta bort det först."
 
 #. MSG_SD_REMOVED c=20
-#: ../../Firmware/ultralcd.cpp:7700
+#: ../../Firmware/ultralcd.cpp:7686
 msgid "Card removed"
 msgstr "Kort borttaget"
 
 #. MSG_CNG_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5547
+#: ../../Firmware/ultralcd.cpp:5521
 msgid "Change SD card"
 msgstr "Byt ut SD-kort"
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5506
-#: ../../Firmware/ultralcd.cpp:5743
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5480
+#: ../../Firmware/ultralcd.cpp:5717
 msgid "Change filament"
 msgstr "Ändra filament"
 
 #. MSG_CHANGE_SUCCESS c=20
-#: ../../Firmware/ultralcd.cpp:2179
+#: ../../Firmware/ultralcd.cpp:2172
 msgid "Change success!"
 msgstr "Ändring utförd!"
 
 #. MSG_CORRECTLY c=20
-#: ../../Firmware/ultralcd.cpp:2227
+#: ../../Firmware/ultralcd.cpp:2220
 msgid "Changed correctly?"
 msgstr "Ändring korrekt?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6187
-#: ../../Firmware/ultralcd.cpp:7303
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6169
+#: ../../Firmware/ultralcd.cpp:7285
 msgid "Checking X axis"
 msgstr "Kontroll X-axel"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6196
-#: ../../Firmware/ultralcd.cpp:7304
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6178
+#: ../../Firmware/ultralcd.cpp:7286
 msgid "Checking Y axis"
 msgstr "Kontroll Y-axel"
 
 #. MSG_SELFTEST_CHECK_Z c=20
-#: ../../Firmware/ultralcd.cpp:7305
+#: ../../Firmware/ultralcd.cpp:7287
 msgid "Checking Z axis"
 msgstr "Kontroll Z-axel"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7306
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:7288
 msgid "Checking bed"
 msgstr "Kontroll bädd"
 
 #. MSG_SELFTEST_CHECK_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:7302
+#: ../../Firmware/ultralcd.cpp:7284
 msgid "Checking endstops"
 msgstr "Kontroll ändlägen"
 
 #. MSG_CHECKING_FILE c=17
-#: ../../Firmware/ultralcd.cpp:7401
+#: ../../Firmware/ultralcd.cpp:7383
 msgid "Checking file"
 msgstr "Kontrollerar fil"
 
 #. MSG_SELFTEST_CHECK_HOTEND c=20
-#: ../../Firmware/ultralcd.cpp:7308
+#: ../../Firmware/ultralcd.cpp:7290
 msgid "Checking hotend"
 msgstr "Kontroll hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7309
-#: ../../Firmware/ultralcd.cpp:7310
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:7291
+#: ../../Firmware/ultralcd.cpp:7292
 msgid "Checking sensors"
 msgstr "Kontroll sensorer"
 
 #. MSG_CHECKS c=18
-#: ../../Firmware/ultralcd.cpp:4728
+#: ../../Firmware/ultralcd.cpp:4686
 msgid "Checks"
 msgstr "Kontroller"
 
 #. MSG_NOT_COLOR c=19
-#: ../../Firmware/ultralcd.cpp:2230
+#: ../../Firmware/ultralcd.cpp:2223
 msgid "Color not correct"
 msgstr "Färg ej korrekt"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3696
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3685
 msgid "Community made"
 msgstr "Allmänhetsgjord"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4245
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:4234
 msgid "Cont."
 msgstr "Frts."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2138
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2131
 msgid "Cooldown"
 msgstr "Kyla ner"
 
 #. MSG_COPY_SEL_LANG c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3634
+#: ../../Firmware/ultralcd.cpp:3623
 msgid "Copy selected language?"
 msgstr "Kopiera det valda språket?"
+
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1247
-#: ../../Firmware/ultralcd.cpp:1276
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1240
+#: ../../Firmware/ultralcd.cpp:1269
 msgid "Crash"
 msgstr "Krock"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4339
-#: ../../Firmware/ultralcd.cpp:4340 ../../Firmware/ultralcd.cpp:4342
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5765
-#: ../../Firmware/ultralcd.cpp:5769
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4328
+#: ../../Firmware/ultralcd.cpp:4329 ../../Firmware/ultralcd.cpp:4331
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5739
+#: ../../Firmware/ultralcd.cpp:5743
 msgid "Crash det."
 msgstr "Krockdetekt."
 
@@ -377,7 +387,7 @@ msgid "Crash detected."
 msgstr "Krock upptäckt."
 
 #. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3538
+#: ../../Firmware/ultralcd.cpp:3527
 msgid ""
 "Crash detection can\n"
 "be turned on only in\n"
@@ -388,34 +398,34 @@ msgstr ""
 "normalt läge"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5155
-#: ../../Firmware/ultralcd.cpp:5578
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:5129
+#: ../../Firmware/ultralcd.cpp:5552
 msgid "Cut filament"
 msgstr "Skär filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4287 ../../Firmware/ultralcd.cpp:4292
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4276 ../../Firmware/ultralcd.cpp:4281
 msgid "Cutter"
 msgstr "Skärare"
 
 #. MSG_DATE c=17
-#: ../../Firmware/ultralcd.cpp:1667
+#: ../../Firmware/ultralcd.cpp:1660
 msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:160 ../../Firmware/ultralcd.cpp:5836
 msgid "Dim"
 msgstr "Dim"
 
 #. MSG_BTN_DISABLE_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:286 ../../Firmware/mmu2/errors_list.h:296
+#: ../../Firmware/mmu2/errors_list.h:300 ../../Firmware/mmu2/errors_list.h:310
 msgid "Disable"
 msgstr "Inaktiver"
 
 #. MSG_DISABLE_STEPPERS c=18
-#: ../../Firmware/ultralcd.cpp:4764
+#: ../../Firmware/ultralcd.cpp:4722
 msgid "Disable steppers"
 msgstr "Inaktivera stepper"
 
@@ -427,7 +437,7 @@ msgid "Disengaging idler"
 msgstr "Kopplar ur Idler"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
-#: ../../Firmware/Marlin_main.cpp:1530 ../../Firmware/Marlin_main.cpp:3400
+#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/Marlin_main.cpp:3397
 #: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
@@ -438,7 +448,7 @@ msgstr ""
 "Vänligen följ manualen Första lagrets kalibrering."
 
 #. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:4107
+#: ../../Firmware/ultralcd.cpp:4096
 msgid ""
 "Do you want to repeat last step to readjust distance between nozzle and "
 "heatbed?"
@@ -447,12 +457,12 @@ msgstr ""
 "bädden?"
 
 #. MSG_BTN_CONTINUE c=8
-#: ../../Firmware/mmu2/errors_list.h:282 ../../Firmware/mmu2/errors_list.h:292
+#: ../../Firmware/mmu2/errors_list.h:296 ../../Firmware/mmu2/errors_list.h:306
 msgid "Done"
 msgstr "Klar"
 
 #. MSG_EXTRUDER_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4176
+#: ../../Firmware/ultralcd.cpp:4165
 msgid "E-correct:"
 msgstr "E-korrektion:"
 
@@ -481,13 +491,13 @@ msgid "ERR Wait for User"
 msgstr "FEL Inväntar anv"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2282
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2275
 msgid "ERROR:"
 msgstr "FEL:"
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5137
-#: ../../Firmware/ultralcd.cpp:5575
+#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:5111
+#: ../../Firmware/ultralcd.cpp:5549
 msgid "Eject filament"
 msgstr "Mata ut filament"
 
@@ -499,17 +509,17 @@ msgid "Ejecting filament"
 msgstr "Matar ut filament"
 
 #. MSG_SELFTEST_ENDSTOP c=16
-#: ../../Firmware/ultralcd.cpp:6984
+#: ../../Firmware/ultralcd.cpp:6966
 msgid "Endstop"
 msgstr "Ändläge"
 
 #. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
-#: ../../Firmware/ultralcd.cpp:6989
+#: ../../Firmware/ultralcd.cpp:6971
 msgid "Endstop not hit"
 msgstr "Ändlage inte nått"
 
 #. MSG_SELFTEST_ENDSTOPS c=20
-#: ../../Firmware/ultralcd.cpp:6975
+#: ../../Firmware/ultralcd.cpp:6957
 msgid "Endstops"
 msgstr "Ändlägen"
 
@@ -521,125 +531,125 @@ msgid "Engaging idler"
 msgstr "Koppla in Idler"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:30
-#: ../../Firmware/ultralcd.cpp:3512
+#: ../../Firmware/ultralcd.cpp:3501
 msgid "Extruder"
 msgstr "Extruder"
 
 #. MSG_INFO_EXTRUDER c=18
-#: ../../Firmware/ultralcd.cpp:1722
+#: ../../Firmware/ultralcd.cpp:1715
 msgid "Extruder info"
 msgstr "Extruder info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4230
-#: ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:4219
+#: ../../Firmware/ultralcd.cpp:4226
 msgid "F. autoload"
 msgstr "F. autoladdn"
 
 #. MSG_FSENSOR_JAM_DETECTION c=13
-#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:4239
+#: ../../Firmware/messages.cpp:46 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:4228
 msgid "F. jam detect"
 msgstr "F.stopp skett"
 
 #. MSG_FSENSOR_RUNOUT c=13
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4236
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4225
 msgid "F. runout"
 msgstr "F. slut"
 
 #. MSG_TITLE_FIL_ALREADY_LOADED c=20
-#: ../../Firmware/mmu2/errors_list.h:148 ../../Firmware/mmu2/errors_list.h:186
+#: ../../Firmware/mmu2/errors_list.h:155 ../../Firmware/mmu2/errors_list.h:196
 msgid "FILAMENT ALREADY LOA"
 msgstr "F. REDAN INLADDAT"
 
 #. MSG_TITLE_FINDA_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:118 ../../Firmware/mmu2/errors_list.h:156
+#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
 msgid "FINDA DIDNT TRIGGER"
 msgstr "FINDA TRIGGADES EJ"
 
 #. MSG_DESC_FINDA_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:197 ../../Firmware/mmu2/errors_list.h:237
+#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:247
 msgid ""
 "FINDA didn't switch off while unloading filament. Try unloading manually. "
 "Ensure filament can move and FINDA works."
 msgstr ""
-"FINDA stängdes inte av när filamentet ladddades ur. Försök att ladda ur manuellt. Se till att "
-"filamentet kan röra sig och att FINDA fungerar."
+"FINDA stängdes inte av när filamentet ladddades ur. Försök att ladda ur "
+"manuellt. Se till att filamentet kan röra sig och att FINDA fungerar."
 
 #. MSG_DESC_FINDA_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:196 ../../Firmware/mmu2/errors_list.h:236
+#: ../../Firmware/mmu2/errors_list.h:206 ../../Firmware/mmu2/errors_list.h:246
 msgid ""
 "FINDA didn't trigger while loading the filament. Ensure the filament can "
 "move and FINDA works."
 msgstr ""
-"FINDA triggades inte vid inladdning av filamment.Se till att filament kan röra sig och att FINDA "
-"fungerar."
+"FINDA triggades inte vid inladdning av filamment.Se till att filament kan "
+"röra sig och att FINDA fungerar."
 
 #. MSG_TITLE_FINDA_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:119 ../../Firmware/mmu2/errors_list.h:157
+#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:164
 msgid "FINDA: FILAM. STUCK"
 msgstr "FINDA: FILAM. STOPP"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4245
-#: ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:4234
+#: ../../Firmware/ultralcd.cpp:4237
 msgid "FS Action"
 msgstr "FS aktion"
 
 #. MSG_TITLE_FSENSOR_DIDNT_TRIGGER c=20
-#: ../../Firmware/mmu2/errors_list.h:120 ../../Firmware/mmu2/errors_list.h:158
+#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
 msgid "FSENSOR DIDNT TRIGG."
 msgstr "FSENSOR TRIGGADE EJ."
 
 #. MSG_TITLE_FSENSOR_TOO_EARLY c=20
-#: ../../Firmware/mmu2/errors_list.h:123 ../../Firmware/mmu2/errors_list.h:161
+#: ../../Firmware/mmu2/errors_list.h:129 ../../Firmware/mmu2/errors_list.h:168
 msgid "FSENSOR TOO EARLY"
 msgstr "FSENSOR FÖR TIDIG"
 
 #. MSG_TITLE_FSENSOR_DIDNT_GO_OFF c=20
-#: ../../Firmware/mmu2/errors_list.h:121 ../../Firmware/mmu2/errors_list.h:159
+#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:166
 msgid "FSENSOR: FIL. STUCK"
 msgstr "FSENSOR: FIL. STOPP"
 
 #. MSG_TITLE_FW_RUNTIME_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:152 ../../Firmware/mmu2/errors_list.h:190
+#: ../../Firmware/mmu2/errors_list.h:159 ../../Firmware/mmu2/errors_list.h:200
 msgid "FW RUNTIME ERROR"
 msgstr "FW RUNTIME FEL"
 
 #. MSG_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5602
+#: ../../Firmware/ultralcd.cpp:5576
 msgid "Fail stats"
 msgstr "Felstatistik"
 
 #. MSG_MMU_FAIL_STATS c=18
-#: ../../Firmware/ultralcd.cpp:5605
+#: ../../Firmware/ultralcd.cpp:5579
 msgid "Fail stats MMU"
 msgstr "Felstatistik MMU"
 
 #. MSG_FALSE_TRIGGERING c=20
-#: ../../Firmware/ultralcd.cpp:7030
+#: ../../Firmware/ultralcd.cpp:7012
 msgid "False triggering"
 msgstr "Felaktig triggning"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5736
-#: ../../Firmware/ultralcd.cpp:5891
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5710
+#: ../../Firmware/ultralcd.cpp:5865
 msgid "Fan speed"
 msgstr "Fläktfart"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7141
-#: ../../Firmware/ultralcd.cpp:7299 ../../Firmware/ultralcd.cpp:7300
-#: ../../Firmware/ultralcd.cpp:7301
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7123
+#: ../../Firmware/ultralcd.cpp:7281 ../../Firmware/ultralcd.cpp:7282
+#: ../../Firmware/ultralcd.cpp:7283
 msgid "Fan test"
 msgstr "Fläkttest"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:5754
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:5728
 msgid "Fans check"
 msgstr "Fläktcheck"
 
@@ -668,115 +678,117 @@ msgid "Feeding to nozzle"
 msgstr "Matar till munstycke"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1246
-#: ../../Firmware/ultralcd.cpp:1275 ../../Firmware/ultralcd.cpp:1329
-#: ../../Firmware/ultralcd.cpp:1331
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1239
+#: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1322
+#: ../../Firmware/ultralcd.cpp:1324
 msgid "Fil. runouts"
 msgstr "Fil. avbrott"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3473
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4768
-#: ../../Firmware/ultralcd.cpp:5747
+#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:3462
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4726
+#: ../../Firmware/ultralcd.cpp:5721
 msgid "Fil. sensor"
 msgstr "Fil. sensor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:33
-#: ../../Firmware/ultralcd.cpp:3806
+#: ../../Firmware/ultralcd.cpp:3795
 msgid "Filament"
 msgstr "Filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2290
-#: ../../Firmware/ultralcd.cpp:2294
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/ultralcd.cpp:2287
 msgid "Filament extruding & with correct color?"
 msgstr "Extruderas filament med rätt färg?"
 
 #. MSG_NOT_LOADED c=19
-#: ../../Firmware/ultralcd.cpp:2229
+#: ../../Firmware/ultralcd.cpp:2222
 msgid "Filament not loaded"
 msgstr "Filament ej laddat"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7025
-#: ../../Firmware/ultralcd.cpp:7029 ../../Firmware/ultralcd.cpp:7033
-#: ../../Firmware/ultralcd.cpp:7328
+#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7015
+#: ../../Firmware/ultralcd.cpp:7310
 msgid "Filament sensor"
 msgstr "Filament sensor"
 
 #. MSG_DESC_FSENSOR_DIDNT_GO_OFF c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:199 ../../Firmware/mmu2/errors_list.h:239
+#: ../../Firmware/mmu2/errors_list.h:209 ../../Firmware/mmu2/errors_list.h:249
 msgid ""
 "Filament sensor didn't switch off while unloading filament. Ensure filament "
 "can move and the sensor works."
 msgstr ""
-"Filamentsensorn triggades inte av när filamentet ladddades ur.Se till att filamentet kan röra sig och "
-"att sensornfungerar."
+"Filamentsensorn triggades inte av när filamentet ladddades ur.Se till att "
+"filamentet kan röra sig och att sensornfungerar."
 
 #. MSG_DESC_FSENSOR_DIDNT_TRIGGER c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:198 ../../Firmware/mmu2/errors_list.h:238
+#: ../../Firmware/mmu2/errors_list.h:208 ../../Firmware/mmu2/errors_list.h:248
 msgid ""
 "Filament sensor didn't trigger while loading the filament. Ensure the "
 "filament reached the fsensor and the sensor works."
 msgstr ""
-"Filamentsensorn triggades inte av när filamentet ladddades in.Se till att filamentet kan röra sig och "
-"att sensornfungerar."
+"Filamentsensorn triggades inte av när filamentet ladddades in.Se till att "
+"filamentet kan röra sig och att sensornfungerar."
 
 #. MSG_DESC_FSENSOR_TOO_EARLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:201 ../../Firmware/mmu2/errors_list.h:241
+#: ../../Firmware/mmu2/errors_list.h:211 ../../Firmware/mmu2/errors_list.h:251
 msgid ""
 "Filament sensor triggered too early while loading to extruder. Check there "
 "isn't anything stuck in PTFE tube. Check that sensor reads properly."
 msgstr ""
-"Filamentsensorn triggades för tidigt under laddning till extruder.Kontrollera PFFE-slang och att "
-"sensorn läser korrekt."
+"Filamentsensorn triggades för tidigt under laddning till extruder."
+"Kontrollera PFFE-slang och att sensorn läser korrekt."
 
 #. MSG_FILAMENT_USED c=19
-#: ../../Firmware/ultralcd.cpp:2363
+#: ../../Firmware/ultralcd.cpp:2356
 msgid "Filament used"
 msgstr "Använt filament"
 
 #. MSG_FILE_INCOMPLETE c=20 r=3
-#: ../../Firmware/ultralcd.cpp:7460
+#: ../../Firmware/ultralcd.cpp:7441
 msgid "File incomplete. Continue anyway?"
 msgstr "Filen är ofullständig. Fortsätta ändå?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
 #: ../../Firmware/messages.cpp:41 ../../Firmware/mmu2_progress_converter.cpp:43
-#: ../../Firmware/ultralcd.cpp:5323 ../../Firmware/ultralcd.cpp:5643
+#: ../../Firmware/ultralcd.cpp:5297 ../../Firmware/ultralcd.cpp:5617
 msgid "Finishing movements"
 msgstr "Avslutar flyttning"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4869
-#: ../../Firmware/ultralcd.cpp:5433
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4840
+#: ../../Firmware/ultralcd.cpp:5407
 msgid "First layer cal."
 msgstr "Förstalager kalib."
 
 #. MSG_WIZARD_SELFTEST c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4032
+#: ../../Firmware/ultralcd.cpp:4021
 msgid "First, I will run the selftest to check most common assembly problems."
-msgstr "Först kommer jag att utföra självtestet för att kontrollera de vanligaste monteringsproblemen."
+msgstr ""
+"Först kommer jag att utföra självtestet för att kontrollera de vanligaste "
+"monteringsproblemen."
 
 #. MSG_FLOW c=15
-#: ../../Firmware/ultralcd.cpp:5737
+#: ../../Firmware/ultralcd.cpp:5711
 msgid "Flow"
 msgstr "Flöde"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6995
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:6977
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Front print fan?"
 msgstr "Frontfläkt?"
 
 #. MSG_BED_CORRECTION_FRONT c=14
-#: ../../Firmware/ultralcd.cpp:2752
+#: ../../Firmware/ultralcd.cpp:2745
 msgid "Front side[μm]"
 msgstr "Frontsida[μm]"
 
 #. MSG_SELFTEST_FANS c=20
-#: ../../Firmware/ultralcd.cpp:7019
+#: ../../Firmware/ultralcd.cpp:7001
 msgid "Front/left fans"
 msgstr "Front/vänster fläkt"
 
@@ -791,8 +803,8 @@ msgid ""
 "G-code sliced for a different level. Please re-slice the model again. Print "
 "cancelled."
 msgstr ""
-"G-code genererad för en annan nivå. Vänligen re-generera modellen igen. Utskriften "
-"avbröts."
+"G-code genererad för en annan nivå. Vänligen re-generera modellen igen. "
+"Utskriften avbröts."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
 #: ../../Firmware/messages.cpp:135 ../../Firmware/util.cpp:323
@@ -807,8 +819,8 @@ msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
 "Print cancelled."
 msgstr ""
-"G-code genererad för en annan skrivartyp. Vänligen re-generera modellen igen. "
-"Utskriften avbröts."
+"G-code genererad för en annan skrivartyp. Vänligen re-generera modellen "
+"igen. Utskriften avbröts."
 
 #. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
 #: ../../Firmware/util.cpp:370
@@ -825,42 +837,42 @@ msgstr ""
 "Utskriften avbröts."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4653
-#: ../../Firmware/ultralcd.cpp:4656 ../../Firmware/ultralcd.cpp:4659
-#: ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4614 ../../Firmware/ultralcd.cpp:4617
+#: ../../Firmware/ultralcd.cpp:4620
 msgid "Gcode"
 msgstr "Gcode"
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4670
-#: ../../Firmware/ultralcd.cpp:4689 ../../Firmware/ultralcd.cpp:4789
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4628
+#: ../../Firmware/ultralcd.cpp:4647 ../../Firmware/ultralcd.cpp:4747
 msgid "HW Setup"
 msgstr "HW inställning"
 
 #. MSG_SELFTEST_HEATERTHERMISTOR c=20
-#: ../../Firmware/ultralcd.cpp:6967
+#: ../../Firmware/ultralcd.cpp:6949
 msgid "Heater/Thermistor"
 msgstr "Värmare/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6236 ../../Firmware/messages.cpp:48
-#: ../../Firmware/ultralcd.cpp:577
+#: ../../Firmware/Marlin_main.cpp:6233 ../../Firmware/messages.cpp:48
+#: ../../Firmware/ultralcd.cpp:561
 msgid "Heating"
 msgstr "Uppvärmning"
 
 #. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:9477
+#: ../../Firmware/Marlin_main.cpp:9474
 msgid "Heating disabled by safety timer."
 msgstr "Uppvärmning avaktiverad av säkerhetstimer."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6267 ../../Firmware/messages.cpp:49
-#: ../../Firmware/ultralcd.cpp:580
+#: ../../Firmware/Marlin_main.cpp:6264 ../../Firmware/messages.cpp:49
+#: ../../Firmware/ultralcd.cpp:564
 msgid "Heating done."
 msgstr "Uppvärmning klar."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=12
-#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4008
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:3997
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -871,7 +883,7 @@ msgstr ""
 "att skriva ut."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4011
+#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4000
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -880,9 +892,9 @@ msgstr ""
 "installationsprocessen?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5778
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5752
 msgid "High power"
 msgstr "Hög kraft"
 
@@ -893,44 +905,45 @@ msgid "Homing"
 msgstr "Flyttar till hempos"
 
 #. MSG_HOTEND_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7301
 msgid "Hotend fan:"
 msgstr "Hotend-fläkt:"
 
 #. MSG_WIZARD_XYZ_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4041
+#: ../../Firmware/ultralcd.cpp:4030
 msgid "I will run xyz calibration now. It will take approx. 12 mins."
-msgstr "Jag kommer att utföra en xyz-kalibrering nu. Det kommer att ta ca. 12 min."
+msgstr ""
+"Jag kommer att utföra en xyz-kalibrering nu. Det kommer att ta ca. 12 min."
 
 #. MSG_WIZARD_Z_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4049
+#: ../../Firmware/ultralcd.cpp:4038
 msgid "I will run z calibration now."
 msgstr "Jag kommer att utföra z-kalibrering nu."
 
 #. MSG_TITLE_IDLER_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:127 ../../Firmware/mmu2/errors_list.h:164
+#: ../../Firmware/mmu2/errors_list.h:133 ../../Firmware/mmu2/errors_list.h:171
 msgid "IDLER CANNOT HOME"
 msgstr "IDLER HEMPOS FEL"
 
 #. MSG_TITLE_IDLER_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:126 ../../Firmware/mmu2/errors_list.h:165
+#: ../../Firmware/mmu2/errors_list.h:132 ../../Firmware/mmu2/errors_list.h:172
 msgid "IDLER CANNOT MOVE"
 msgstr "IDLER KAN EJ FLYTTA"
 
 #. MSG_TITLE_INVALID_TOOL c=20
-#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:187
+#: ../../Firmware/mmu2/errors_list.h:156 ../../Firmware/mmu2/errors_list.h:197
 msgid "INVALID TOOL"
 msgstr "OGILTIGT VERKTYG"
 
 #. MSG_ADDITIONAL_SHEETS c=20 r=9
-#: ../../Firmware/ultralcd.cpp:4115
+#: ../../Firmware/ultralcd.cpp:4104
 msgid ""
 "If you have additional steel sheets, calibrate their presets in Settings - "
 "HW Setup - Steel sheets."
 msgstr ""
-"Om du har ytterligare metallskivor, kalibrera deras förinställningar i Inställningar - HW inställning "
-"- Metallskiva."
+"Om du har ytterligare metallskivor, kalibrera deras förinställningar i "
+"Inställningar - HW inställning - Metallskiva."
 
 #. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=20 r=4
 #: ../../Firmware/mesh_bed_calibration.cpp:2530
@@ -938,22 +951,22 @@ msgid "Improving bed calibration point"
 msgstr "Förbättrar bäddens kalibreringspunkt"
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5487
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:5461
 msgid "Info screen"
 msgstr "Infoskärm"
 
 #. MSG_INIT_SDCARD c=18
-#: ../../Firmware/ultralcd.cpp:5554
+#: ../../Firmware/ultralcd.cpp:5528
 msgid "Init. SD card"
 msgstr "Init. SD-kort"
 
 #. MSG_INSERT_FILAMENT c=20
-#: ../../Firmware/ultralcd.cpp:2165
+#: ../../Firmware/ultralcd.cpp:2158
 msgid "Insert filament"
 msgstr "Sätt i filament"
 
 #. MSG_INSERT_FIL c=20 r=6
-#: ../../Firmware/ultralcd.cpp:6233
+#: ../../Firmware/ultralcd.cpp:6215
 msgid ""
 "Insert the filament (do not load it) into the extruder and then press the "
 "knob."
@@ -961,23 +974,23 @@ msgstr ""
 "Infoga filamentet (ladda inte in det) i extrudern och tryck sedan på knappen."
 
 #. MSG_DESC_FW_RUNTIME_ERROR c=20 r=11
-#: ../../Firmware/mmu2/errors_list.h:232 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:242 ../../Firmware/mmu2/errors_list.h:283
 msgid ""
 "Internal runtime error. Try resetting the MMU unit or updating the firmware. "
 "If the issue persists, contact support."
 msgstr ""
-"Internt körtidsfel. Prova återställa MMU-enheten eller uppdatera firmware. Kontakta supporten om "
-"problemet kvarstår."
+"Internt körtidsfel. Prova återställa MMU-enheten eller uppdatera firmware. "
+"Kontakta supporten om problemet kvarstår."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3827
-#: ../../Firmware/ultralcd.cpp:4074
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3816
+#: ../../Firmware/ultralcd.cpp:4063
 msgid "Is filament loaded?"
 msgstr "Är filament laddat?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3301 ../../Firmware/Marlin_main.cpp:4911
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/Marlin_main.cpp:3298 ../../Firmware/Marlin_main.cpp:4908
+#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:4039
 msgid "Is steel sheet on heatbed?"
 msgstr "Ligger metallskiva på värmebädden?"
 
@@ -987,124 +1000,124 @@ msgid "Iteration"
 msgstr "Iteration"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1166
-#: ../../Firmware/ultralcd.cpp:1299
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:1159
+#: ../../Firmware/ultralcd.cpp:1292
 msgid "Last print"
 msgstr "Senaste utskrift"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1186
-#: ../../Firmware/ultralcd.cpp:1273 ../../Firmware/ultralcd.cpp:1328
+#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/ultralcd.cpp:1266 ../../Firmware/ultralcd.cpp:1321
 msgid "Last print failures"
 msgstr "Senaste utskriftsfel"
 
 #. MSG_LEFT c=10
-#: ../../Firmware/ultralcd.cpp:2494
+#: ../../Firmware/ultralcd.cpp:2487
 msgid "Left"
 msgstr "Vänster"
 
 #. MSG_SELFTEST_HOTEND_FAN c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7001
-#: ../../Firmware/ultralcd.cpp:7147 ../../Firmware/ultralcd.cpp:7152
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:6983
+#: ../../Firmware/ultralcd.cpp:7129 ../../Firmware/ultralcd.cpp:7134
 msgid "Left hotend fan?"
 msgstr "Vänst hotend fläkt?"
 
 #. MSG_BED_CORRECTION_LEFT c=14
-#: ../../Firmware/ultralcd.cpp:2750
+#: ../../Firmware/ultralcd.cpp:2743
 msgid "Left side [μm]"
 msgstr "Vänstsida [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5860
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5834
 msgid "Level Bright"
 msgstr "Ljusnivå"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5861
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5835
 msgid "Level Dimmed"
 msgstr "Nivå dämpad"
 
 #. MSG_LIN_CORRECTION c=18
-#: ../../Firmware/ultralcd.cpp:4797
+#: ../../Firmware/ultralcd.cpp:4755
 msgid "Lin. correction"
 msgstr "Linjär korrektion"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4809
-#: ../../Firmware/ultralcd.cpp:5502
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4767
+#: ../../Firmware/ultralcd.cpp:5476
 msgid "Live adjust Z"
 msgstr "Live justera Z"
 
 #. MSG_LOAD_ALL c=18
-#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5098
-#: ../../Firmware/ultralcd.cpp:5178
+#: ../../Firmware/messages.cpp:172 ../../Firmware/ultralcd.cpp:5072
+#: ../../Firmware/ultralcd.cpp:5152
 msgid "Load All"
 msgstr "Ladda alla"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5100
-#: ../../Firmware/ultralcd.cpp:5119 ../../Firmware/ultralcd.cpp:5180
-#: ../../Firmware/ultralcd.cpp:5571 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5074
+#: ../../Firmware/ultralcd.cpp:5093 ../../Firmware/ultralcd.cpp:5154
+#: ../../Firmware/ultralcd.cpp:5545 ../../Firmware/ultralcd.cpp:5563
 msgid "Load filament"
 msgstr "Ladda filament"
 
 #. MSG_LOAD_TO_EXTRUDER c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5546
 msgid "Load to extruder"
 msgstr "Ladd till extruder"
 
 #. MSG_LOAD_TO_NOZZLE c=18
-#: ../../Firmware/ultralcd.cpp:5573
+#: ../../Firmware/ultralcd.cpp:5547
 msgid "Load to nozzle"
 msgstr "Ladd till munstyck"
 
 #. MSG_LOADING_COLOR c=20
-#: ../../Firmware/ultralcd.cpp:2201
+#: ../../Firmware/ultralcd.cpp:2194
 msgid "Loading color"
 msgstr "Laddar färg"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3651 ../../Firmware/messages.cpp:58
-#: ../../Firmware/mmu2.cpp:438 ../../Firmware/mmu2.cpp:468
+#: ../../Firmware/Marlin_main.cpp:3648 ../../Firmware/messages.cpp:58
+#: ../../Firmware/mmu2.cpp:456 ../../Firmware/mmu2.cpp:486
 #: ../../Firmware/mmu2_progress_converter.cpp:51
-#: ../../Firmware/ultralcd.cpp:2212 ../../Firmware/ultralcd.cpp:3919
+#: ../../Firmware/ultralcd.cpp:2205 ../../Firmware/ultralcd.cpp:3908
 msgid "Loading filament"
 msgstr "Laddar filament"
 
 #. MSG_LOOSE_PULLEY c=20
-#: ../../Firmware/ultralcd.cpp:7007
+#: ../../Firmware/ultralcd.cpp:6989
 msgid "Loose pulley"
 msgstr "Lös pulley"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4418
 msgid "Loud"
 msgstr "Högt"
 
 #. MSG_TITLE_FW_UPDATE_NEEDED c=20
-#: ../../Firmware/mmu2/errors_list.h:151 ../../Firmware/mmu2/errors_list.h:189
+#: ../../Firmware/mmu2/errors_list.h:158 ../../Firmware/mmu2/errors_list.h:199
 msgid "MMU FW UPDATE NEEDED"
 msgstr "MMU FW UPDATE KRÄVS"
 
 #. MSG_DESC_QUEUE_FULL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:230 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:240 ../../Firmware/mmu2/errors_list.h:281
 msgid "MMU Firmware internal error, please reset the MMU."
 msgstr "MMU Firmware internt fel, vänligen återställ MMU."
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4379
-#: ../../Firmware/ultralcd.cpp:4380
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4368
+#: ../../Firmware/ultralcd.cpp:4369
 msgid "MMU Mode"
 msgstr "MMU-läge"
 
 #. MSG_TITLE_MMU_NOT_RESPONDING c=20
-#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:184
+#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:194
 msgid "MMU NOT RESPONDING"
 msgstr "MMU SVARAR INTE"
 
 #. MSG_MMU_RESTORE_TEMP c=20 r=4
-#: ../../Firmware/mmu2.cpp:598
+#: ../../Firmware/mmu2.cpp:619
 msgid "MMU Retry: Restoring temperature..."
 msgstr "MMU försök igen: Återställer temperatur..."
 
@@ -1115,137 +1128,138 @@ msgid "MMU SELFTEST FAILED"
 msgstr "MMU SJÄLVTEST FELADE"
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1161
-#: ../../Firmware/ultralcd.cpp:1189
+#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:1180
+#: ../../Firmware/ultralcd.cpp:1208
 msgid "MMU fails"
 msgstr "MMU felar"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1188
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:1181
 msgid "MMU load fails"
 msgstr "MMU-laddn felar"
 
 #. MSG_DESC_COMMUNICATION_ERROR c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:227 ../../Firmware/mmu2/errors_list.h:265
+#: ../../Firmware/mmu2/errors_list.h:237 ../../Firmware/mmu2/errors_list.h:278
 msgid ""
 "MMU unit not responding correctly. Check the wiring and connectors. If the "
 "issue persists, contact support."
 msgstr ""
-"MMU-enheten svarar inte korrekt. Kontrollera kablarna och kontakterna.Om problemet kvarstår, kontakta "
-"supporten."
+"MMU-enheten svarar inte korrekt. Kontrollera kablarna och kontakterna.Om "
+"problemet kvarstår, kontakta supporten."
 
 #. MSG_DESC_MMU_NOT_RESPONDING c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:226 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:236 ../../Firmware/mmu2/errors_list.h:277
 msgid ""
 "MMU unit not responding. Check the wiring and connectors. If the issue "
 "persists, contact support."
 msgstr ""
-"MMU-enheten svarar inte. Kontrollera kablarna och kontakterna.Om problemet kvarstår, kontakta "
-"supporten."
+"MMU-enheten svarar inte. Kontrollera kablarna och kontakterna.Om problemet "
+"kvarstår, kontakta supporten."
 
 #. MSG_MMU_CONNECTED c=18
-#: ../../Firmware/ultralcd.cpp:1679
+#: ../../Firmware/ultralcd.cpp:1672
 msgid "MMU2 connected"
 msgstr "MMU2 ansluten"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5808
 msgid "Magnets comp."
 msgstr "Magnets komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1165
-#: ../../Firmware/ultralcd.cpp:1298 ../../Firmware/ultralcd.cpp:1340
-#: ../../Firmware/ultralcd.cpp:1644 ../../Firmware/ultralcd.cpp:4757
-#: ../../Firmware/ultralcd.cpp:4863 ../../Firmware/ultralcd.cpp:5097
-#: ../../Firmware/ultralcd.cpp:5117 ../../Firmware/ultralcd.cpp:5135
-#: ../../Firmware/ultralcd.cpp:5153 ../../Firmware/ultralcd.cpp:5177
-#: ../../Firmware/ultralcd.cpp:5730
+#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:1158
+#: ../../Firmware/ultralcd.cpp:1291 ../../Firmware/ultralcd.cpp:1333
+#: ../../Firmware/ultralcd.cpp:1637 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/ultralcd.cpp:4834 ../../Firmware/ultralcd.cpp:5071
+#: ../../Firmware/ultralcd.cpp:5091 ../../Firmware/ultralcd.cpp:5109
+#: ../../Firmware/ultralcd.cpp:5127 ../../Firmware/ultralcd.cpp:5151
+#: ../../Firmware/ultralcd.cpp:5704
 msgid "Main"
 msgstr "Huvudmeny"
 
 #. MSG_MEASURED_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2535
+#: ../../Firmware/ultralcd.cpp:2528
 msgid "Measured skew"
 msgstr "Mätt skevhet"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3282
+#: ../../Firmware/Marlin_main.cpp:3279
 #: ../../Firmware/mesh_bed_calibration.cpp:2836 ../../Firmware/messages.cpp:66
 msgid "Measuring reference height of calibration point"
 msgstr "Mätning av referenshöjd för kalibreringspunkt"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5830
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:5804
 msgid "Mesh"
 msgstr "Nätverk"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4794
-#: ../../Firmware/ultralcd.cpp:4881
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4752
+#: ../../Firmware/ultralcd.cpp:4852
 msgid "Mesh Bed Leveling"
 msgstr "Bäddytsjustering"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4336 ../../Firmware/ultralcd.cpp:4356
-#: ../../Firmware/ultralcd.cpp:4359 ../../Firmware/ultralcd.cpp:4362
-#: ../../Firmware/ultralcd.cpp:4365 ../../Firmware/ultralcd.cpp:5761
-#: ../../Firmware/ultralcd.cpp:5768 ../../Firmware/ultralcd.cpp:5775
-#: ../../Firmware/ultralcd.cpp:5776 ../../Firmware/ultralcd.cpp:5777
-#: ../../Firmware/ultralcd.cpp:5778 ../../Firmware/ultralcd.cpp:5862
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4325 ../../Firmware/ultralcd.cpp:4345
+#: ../../Firmware/ultralcd.cpp:4348 ../../Firmware/ultralcd.cpp:4351
+#: ../../Firmware/ultralcd.cpp:4354 ../../Firmware/ultralcd.cpp:5735
+#: ../../Firmware/ultralcd.cpp:5742 ../../Firmware/ultralcd.cpp:5749
+#: ../../Firmware/ultralcd.cpp:5750 ../../Firmware/ultralcd.cpp:5751
+#: ../../Firmware/ultralcd.cpp:5752 ../../Firmware/ultralcd.cpp:5836
 msgid "Mode"
 msgstr "Mode"
 
 #. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:3587
+#: ../../Firmware/ultralcd.cpp:3576
 msgid "Mode change in progress..."
 msgstr "Lägesändring pågår..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4573
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4579
-#: ../../Firmware/ultralcd.cpp:4582
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4537
+#: ../../Firmware/ultralcd.cpp:4540
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_DESC_TMC c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:207 ../../Firmware/mmu2/errors_list.h:246
-#: ../../Firmware/mmu2/errors_list.h:247 ../../Firmware/mmu2/errors_list.h:248
-#: ../../Firmware/mmu2/errors_list.h:249 ../../Firmware/mmu2/errors_list.h:250
-#: ../../Firmware/mmu2/errors_list.h:251 ../../Firmware/mmu2/errors_list.h:252
-#: ../../Firmware/mmu2/errors_list.h:253 ../../Firmware/mmu2/errors_list.h:254
-#: ../../Firmware/mmu2/errors_list.h:255 ../../Firmware/mmu2/errors_list.h:256
+#: ../../Firmware/mmu2/errors_list.h:217 ../../Firmware/mmu2/errors_list.h:256
 #: ../../Firmware/mmu2/errors_list.h:257 ../../Firmware/mmu2/errors_list.h:258
 #: ../../Firmware/mmu2/errors_list.h:259 ../../Firmware/mmu2/errors_list.h:260
 #: ../../Firmware/mmu2/errors_list.h:261 ../../Firmware/mmu2/errors_list.h:262
-#: ../../Firmware/mmu2/errors_list.h:263
+#: ../../Firmware/mmu2/errors_list.h:263 ../../Firmware/mmu2/errors_list.h:264
+#: ../../Firmware/mmu2/errors_list.h:265 ../../Firmware/mmu2/errors_list.h:266
+#: ../../Firmware/mmu2/errors_list.h:267 ../../Firmware/mmu2/errors_list.h:268
+#: ../../Firmware/mmu2/errors_list.h:269 ../../Firmware/mmu2/errors_list.h:270
+#: ../../Firmware/mmu2/errors_list.h:271 ../../Firmware/mmu2/errors_list.h:272
+#: ../../Firmware/mmu2/errors_list.h:273 ../../Firmware/mmu2/errors_list.h:274
+#: ../../Firmware/mmu2/errors_list.h:275 ../../Firmware/mmu2/errors_list.h:276
 msgid "More details online."
 msgstr "Mera detaljer online."
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6981
-#: ../../Firmware/ultralcd.cpp:6990 ../../Firmware/ultralcd.cpp:7008
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:6963
+#: ../../Firmware/ultralcd.cpp:6972 ../../Firmware/ultralcd.cpp:6990
 msgid "Motor"
 msgstr "Motor"
 
 #. MSG_MOVE_X c=18
-#: ../../Firmware/ultralcd.cpp:3509
+#: ../../Firmware/ultralcd.cpp:3498
 msgid "Move X"
 msgstr "Flytta X"
 
 #. MSG_MOVE_Y c=18
-#: ../../Firmware/ultralcd.cpp:3510
+#: ../../Firmware/ultralcd.cpp:3499
 msgid "Move Y"
 msgstr "Flytta Y"
 
 #. MSG_MOVE_Z c=18
-#: ../../Firmware/ultralcd.cpp:3511
+#: ../../Firmware/ultralcd.cpp:3500
 msgid "Move Z"
 msgstr "Flytta Z"
 
 #. MSG_MOVE_AXIS c=18
-#: ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:4721
 msgid "Move axis"
 msgstr "Flytta axlar"
 
@@ -1257,10 +1271,10 @@ msgstr "Flyttar väljare"
 
 #. MSG_NA c=3
 #: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:128
-#: ../../Firmware/ultralcd.cpp:2500 ../../Firmware/ultralcd.cpp:2545
-#: ../../Firmware/ultralcd.cpp:3434 ../../Firmware/ultralcd.cpp:4229
-#: ../../Firmware/ultralcd.cpp:4230 ../../Firmware/ultralcd.cpp:4232
-#: ../../Firmware/ultralcd.cpp:5834
+#: ../../Firmware/ultralcd.cpp:2493 ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:3423 ../../Firmware/ultralcd.cpp:4218
+#: ../../Firmware/ultralcd.cpp:4219 ../../Firmware/ultralcd.cpp:4221
+#: ../../Firmware/ultralcd.cpp:5808
 msgid "N/A"
 msgstr "N/A"
 
@@ -1270,76 +1284,76 @@ msgid "New firmware version available:"
 msgstr "Ny firmware vers tillgänglig:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2802
-#: ../../Firmware/ultralcd.cpp:3170 ../../Firmware/ultralcd.cpp:4747
-#: ../../Firmware/ultralcd.cpp:5997
+#: ../../Firmware/messages.cpp:70 ../../Firmware/ultralcd.cpp:2795
+#: ../../Firmware/ultralcd.cpp:3163 ../../Firmware/ultralcd.cpp:4705
+#: ../../Firmware/ultralcd.cpp:5979
 msgid "No"
 msgstr "Nej"
 
 #. MSG_NO_CARD c=18
-#: ../../Firmware/ultralcd.cpp:5552
+#: ../../Firmware/ultralcd.cpp:5526
 msgid "No SD card"
 msgstr "Inget SD-kort"
 
 #. MSG_NO_MOVE c=20
-#: ../../Firmware/Marlin_main.cpp:5402
+#: ../../Firmware/Marlin_main.cpp:5399
 msgid "No move."
 msgstr "Ingen rörelse."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:4573 ../../Firmware/ultralcd.cpp:4582
-#: ../../Firmware/ultralcd.cpp:4612 ../../Firmware/ultralcd.cpp:4621
-#: ../../Firmware/ultralcd.cpp:4653 ../../Firmware/ultralcd.cpp:4662
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4449
+#: ../../Firmware/ultralcd.cpp:4458 ../../Firmware/ultralcd.cpp:4531
+#: ../../Firmware/ultralcd.cpp:4540 ../../Firmware/ultralcd.cpp:4570
+#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4611
+#: ../../Firmware/ultralcd.cpp:4620 ../../Firmware/ultralcd.cpp:4782
 msgid "None"
 msgstr "Ingen"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4334
-#: ../../Firmware/ultralcd.cpp:4379 ../../Firmware/ultralcd.cpp:4395
-#: ../../Firmware/ultralcd.cpp:4414 ../../Firmware/ultralcd.cpp:5761
+#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:4323
+#: ../../Firmware/ultralcd.cpp:4368 ../../Firmware/ultralcd.cpp:4777
+#: ../../Firmware/ultralcd.cpp:5735
 msgid "Normal"
 msgstr "Normal"
 
 #. MSG_SELFTEST_NOTCONNECTED c=20
-#: ../../Firmware/ultralcd.cpp:6968
+#: ../../Firmware/ultralcd.cpp:6950
 msgid "Not connected"
 msgstr "Inte ansluten"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7166
-#: ../../Firmware/ultralcd.cpp:7181 ../../Firmware/ultralcd.cpp:7189
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7148
+#: ../../Firmware/ultralcd.cpp:7163 ../../Firmware/ultralcd.cpp:7171
 msgid "Not spinning"
 msgstr "Roterar inte"
 
 #. MSG_WIZARD_V2_CAL c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3928
+#: ../../Firmware/ultralcd.cpp:3917
 msgid ""
 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
 msgstr ""
 "Nu ska jag kalibrera avståndet mellan munstyckets spets och värmebäddsytan."
 
 #. MSG_WIZARD_WILL_PREHEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4059
+#: ../../Firmware/ultralcd.cpp:4048
 msgid "Now I will preheat nozzle for PLA."
 msgstr "Nu ska jag förvärma munstycket för PLA."
 
 #. MSG_REMOVE_TEST_PRINT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:4048
+#: ../../Firmware/ultralcd.cpp:4037
 msgid "Now remove the test print from steel sheet."
 msgstr "Ta nu bort testutskriften från metallskivan."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1403
-#: ../../Firmware/ultralcd.cpp:4491 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4497 ../../Firmware/ultralcd.cpp:4500
-#: ../../Firmware/ultralcd.cpp:5733 ../../Firmware/ultralcd.cpp:5880
+#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1396
+#: ../../Firmware/ultralcd.cpp:4449 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4455 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/ultralcd.cpp:5707 ../../Firmware/ultralcd.cpp:5854
 msgid "Nozzle"
 msgstr "Munstycke"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4544
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4502
 msgid "Nozzle d."
 msgstr "Munst dia."
 
@@ -1351,90 +1365,91 @@ msgstr "OK"
 
 #. MSG_OFF c=3
 #: ../../Firmware/SpoolJoin.cpp:40 ../../Firmware/menu.cpp:467
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4225
-#: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4237
-#: ../../Firmware/ultralcd.cpp:4239 ../../Firmware/ultralcd.cpp:4264
-#: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4340
-#: ../../Firmware/ultralcd.cpp:4775 ../../Firmware/ultralcd.cpp:4782
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4805
-#: ../../Firmware/ultralcd.cpp:5657 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5765 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4214
+#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4226
+#: ../../Firmware/ultralcd.cpp:4228 ../../Firmware/ultralcd.cpp:4253
+#: ../../Firmware/ultralcd.cpp:4281 ../../Firmware/ultralcd.cpp:4329
+#: ../../Firmware/ultralcd.cpp:4733 ../../Firmware/ultralcd.cpp:4740
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4763
+#: ../../Firmware/ultralcd.cpp:5631 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5739 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "Off"
 msgstr "Av"
 
 #. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
-#: ../../Firmware/Marlin_main.cpp:1513
+#: ../../Firmware/Marlin_main.cpp:1509
 msgid "Old settings found. Default PID, Esteps etc. will be set."
-msgstr "Gamla inställningar funna. Standard PID, Esteps etc. kommer att ställas in."
+msgstr ""
+"Gamla inställningar funna. Standard PID, Esteps etc. kommer att ställas in."
 
 #. MSG_ON c=3
 #: ../../Firmware/SpoolJoin.cpp:38 ../../Firmware/messages.cpp:127
-#: ../../Firmware/ultralcd.cpp:4225 ../../Firmware/ultralcd.cpp:4236
-#: ../../Firmware/ultralcd.cpp:4237 ../../Firmware/ultralcd.cpp:4239
-#: ../../Firmware/ultralcd.cpp:4264 ../../Firmware/ultralcd.cpp:4282
-#: ../../Firmware/ultralcd.cpp:4339 ../../Firmware/ultralcd.cpp:4775
-#: ../../Firmware/ultralcd.cpp:4782 ../../Firmware/ultralcd.cpp:4801
-#: ../../Firmware/ultralcd.cpp:4805 ../../Firmware/ultralcd.cpp:5754
-#: ../../Firmware/ultralcd.cpp:5763 ../../Firmware/ultralcd.cpp:5834
-#: ../../Firmware/ultralcd.cpp:7829 ../../Firmware/ultralcd.cpp:7833
+#: ../../Firmware/ultralcd.cpp:4214 ../../Firmware/ultralcd.cpp:4225
+#: ../../Firmware/ultralcd.cpp:4226 ../../Firmware/ultralcd.cpp:4228
+#: ../../Firmware/ultralcd.cpp:4253 ../../Firmware/ultralcd.cpp:4271
+#: ../../Firmware/ultralcd.cpp:4328 ../../Firmware/ultralcd.cpp:4733
+#: ../../Firmware/ultralcd.cpp:4740 ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4763 ../../Firmware/ultralcd.cpp:5728
+#: ../../Firmware/ultralcd.cpp:5737 ../../Firmware/ultralcd.cpp:5808
+#: ../../Firmware/ultralcd.cpp:7815 ../../Firmware/ultralcd.cpp:7819
 msgid "On"
 msgstr "På"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4451
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:4409
 msgid "Once"
 msgstr "En gång"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9677 ../../Firmware/messages.cpp:168
+#: ../../Firmware/Marlin_main.cpp:9674 ../../Firmware/messages.cpp:168
 msgid "PAUSED THERMAL ERROR"
 msgstr "PAUSAT TERMISKT FEL"
 
 #. MSG_PID_RUNNING c=20
-#: ../../Firmware/ultralcd.cpp:1036
+#: ../../Firmware/ultralcd.cpp:1010
 msgid "PID cal."
 msgstr "PID kalibrering."
 
 #. MSG_PID_FINISHED c=20
-#: ../../Firmware/ultralcd.cpp:1041
+#: ../../Firmware/ultralcd.cpp:1015
 msgid "PID cal. finished"
 msgstr "PID kalibrering klar"
 
 #. MSG_PID_EXTRUDER c=17
-#: ../../Firmware/ultralcd.cpp:4884
+#: ../../Firmware/ultralcd.cpp:4855
 msgid "PID calibration"
 msgstr "PID kalibrering"
 
 #. MSG_PINDA_PREHEAT c=20
-#: ../../Firmware/ultralcd.cpp:666
+#: ../../Firmware/ultralcd.cpp:649
 msgid "PINDA Heating"
 msgstr "PINDA uppvärmning"
 
 #. MSG_PINDA_CALIBRATION c=13
-#: ../../Firmware/Marlin_main.cpp:4957 ../../Firmware/Marlin_main.cpp:5060
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:663
-#: ../../Firmware/ultralcd.cpp:4801 ../../Firmware/ultralcd.cpp:4891
+#: ../../Firmware/Marlin_main.cpp:4954 ../../Firmware/Marlin_main.cpp:5057
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:646
+#: ../../Firmware/ultralcd.cpp:4759 ../../Firmware/ultralcd.cpp:4862
 msgid "PINDA cal."
 msgstr "PINDA kal."
 
 #. MSG_PINDA_CAL_FAILED c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3384
+#: ../../Firmware/ultralcd.cpp:3373
 msgid "PINDA calibration failed"
 msgstr "PINDA-kalibrering misslyckades"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5137 ../../Firmware/messages.cpp:114
-#: ../../Firmware/ultralcd.cpp:3378
+#: ../../Firmware/Marlin_main.cpp:5134 ../../Firmware/messages.cpp:114
+#: ../../Firmware/ultralcd.cpp:3367
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
 "Settings->PINDA cal."
 msgstr ""
-"PINDA-kalibreringen är klar och aktiv. PINDA kalibrering kan inaktiveras i menyn Inställningar->PINDA "
-"kal."
+"PINDA-kalibreringen är klar och aktiv. PINDA kalibrering kan inaktiveras i "
+"menyn Inställningar->PINDA kal."
 
 #. MSG_TITLE_PULLEY_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:122 ../../Firmware/mmu2/errors_list.h:160
+#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:167
 msgid "PULLEY CANNOT MOVE"
 msgstr "REMSKIVA FASTNAT"
 
@@ -1445,13 +1460,13 @@ msgid "Parking selector"
 msgstr "Parkerar väljare"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4248
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:4237
 msgid "Pause"
 msgstr "Paus"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5516
-#: ../../Firmware/ultralcd.cpp:5518
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:5490
+#: ../../Firmware/ultralcd.cpp:5492
 msgid "Pause print"
 msgstr "Pausa utskrift"
 
@@ -1462,16 +1477,16 @@ msgid "Performing cut"
 msgstr "Utför skärning"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3306 ../../Firmware/messages.cpp:72
+#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/messages.cpp:72
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
-"Placera ett pappersark under munstycket under kalibreringen av de första 4 punkterna. Stäng av "
-"skrivaren omedelbart om munstycket rör vid pappret.."
+"Placera ett pappersark under munstycket under kalibreringen av de första 4 "
+"punkterna. Stäng av skrivaren omedelbart om munstycket rör vid pappret.."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4138
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4127
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1480,32 +1495,35 @@ msgstr ""
 "starta om skrivaren."
 
 #. MSG_CHECK_IR_CONNECTION c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6258
+#: ../../Firmware/ultralcd.cpp:6240
 msgid "Please check the IR sensor connection, unload filament if present."
 msgstr "Kontrollera IR-sensorns anslutning, mata ut eventuellt filament."
 
 #. MSG_SELFTEST_PLEASECHECK c=20
-#: ../../Firmware/ultralcd.cpp:6962
+#: ../../Firmware/ultralcd.cpp:6944
 msgid "Please check:"
 msgstr "Kontrollera:"
 
 #. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
-#: ../../Firmware/ultralcd.cpp:4110
+#: ../../Firmware/ultralcd.cpp:4099
 msgid "Please clean heatbed and then press the knob."
 msgstr "Rengör bädden och tryck sedan på knappen."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3280 ../../Firmware/messages.cpp:24
+#: ../../Firmware/Marlin_main.cpp:3277 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Rengör munstycket för kalibrering. Klicka när du är klar."
 
 #. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3915
-msgid "Please insert filament into the extruder, then press the knob to load it."
-msgstr "Vänligen sätt i filamentet i extrudern, tryck sedan på knappen för inladdning.."
+#: ../../Firmware/ultralcd.cpp:3904
+msgid ""
+"Please insert filament into the extruder, then press the knob to load it."
+msgstr ""
+"Vänligen sätt i filamentet i extrudern, tryck sedan på knappen för "
+"inladdning.."
 
 #. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3912
+#: ../../Firmware/ultralcd.cpp:3901
 msgid ""
 "Please insert filament into the first tube of the MMU, then press the knob "
 "to load it."
@@ -1514,50 +1532,50 @@ msgstr ""
 "knappen för inladdning."
 
 #. MSG_PLEASE_LOAD_PLA c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3835
+#: ../../Firmware/ultralcd.cpp:3824
 msgid "Please load filament first."
 msgstr "Vänligen ladda filament först."
 
 #. MSG_CHECK_IDLER c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3581
+#: ../../Firmware/Marlin_main.cpp:3578
 msgid "Please open idler and remove filament manually."
 msgstr "Öppna idler och ta bort filamentet manuellt."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
 #: ../../Firmware/mesh_bed_calibration.cpp:2795 ../../Firmware/messages.cpp:74
-#: ../../Firmware/ultralcd.cpp:4052
+#: ../../Firmware/ultralcd.cpp:4041
 msgid "Please place steel sheet on heatbed."
 msgstr "Placera metallskiva på värmebädden."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11532 ../../Firmware/Marlin_main.cpp:11585
+#: ../../Firmware/Marlin_main.cpp:11529 ../../Firmware/Marlin_main.cpp:11582
 #: ../../Firmware/messages.cpp:78
 msgid "Please press the knob to unload filament"
 msgstr "Vänligen tryck på knappen för att mata ut filament"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:5195
 msgid "Please pull out filament immediately"
 msgstr "Vänligen ta ut filamentet omedelbart"
 
 #. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
-#: ../../Firmware/ultralcd.cpp:4047
+#: ../../Firmware/ultralcd.cpp:4036
 msgid "Please remove shipping helpers first."
 msgstr "Vänligen ta bort fraktinsatserna först."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3303 ../../Firmware/Marlin_main.cpp:4921
+#: ../../Firmware/Marlin_main.cpp:3300 ../../Firmware/Marlin_main.cpp:4918
 #: ../../Firmware/messages.cpp:83
 msgid "Please remove steel sheet from heatbed."
 msgstr "Ta bort metallskivan från värmebädden."
 
 #. MSG_RUN_XYZ c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4897
+#: ../../Firmware/Marlin_main.cpp:4894
 msgid "Please run XYZ calibration first."
 msgstr "Utför XYZ-kalibrering först."
 
 #. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
-#: ../../Firmware/ultralcd.cpp:6255
+#: ../../Firmware/ultralcd.cpp:6237
 msgid "Please unload the filament first, then repeat this action."
 msgstr "Vänligen mata ut filamentet först och upprepa sedan denna åtgärd."
 
@@ -1567,51 +1585,51 @@ msgid "Please upgrade."
 msgstr "Vänligen uppgradera."
 
 #. MSG_PLEASE_WAIT c=20
-#: ../../Firmware/Marlin_main.cpp:3577 ../../Firmware/Marlin_main.cpp:3595
-#: ../../Firmware/Marlin_main.cpp:7957 ../../Firmware/messages.cpp:75
-#: ../../Firmware/ultralcd.cpp:2202 ../../Firmware/ultralcd.cpp:2213
+#: ../../Firmware/Marlin_main.cpp:3574 ../../Firmware/Marlin_main.cpp:3592
+#: ../../Firmware/Marlin_main.cpp:7954 ../../Firmware/messages.cpp:75
+#: ../../Firmware/ultralcd.cpp:2195 ../../Firmware/ultralcd.cpp:2206
 msgid "Please wait"
 msgstr "Vänligen vänta"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1245
-#: ../../Firmware/ultralcd.cpp:1274
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:1238
+#: ../../Firmware/ultralcd.cpp:1267
 msgid "Power failures"
 msgstr "Strömavbrott"
 
 #. MSG_PREHEAT c=18
-#: ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5485
 msgid "Preheat"
 msgstr "Förvärm"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2283
+#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:2276
 msgid "Preheat the nozzle!"
 msgstr "Förvärm munstycket!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2898
-#: ../../Firmware/ultralcd.cpp:3897 ../../Firmware/ultralcd.cpp:3899
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2891
+#: ../../Firmware/ultralcd.cpp:3886 ../../Firmware/ultralcd.cpp:3888
 msgid "Preheating nozzle. Please wait."
 msgstr "Förvärmer munstycke. Vänta."
 
 #. MSG_PREHEATING_TO_CUT c=20
-#: ../../Firmware/ultralcd.cpp:2001
+#: ../../Firmware/ultralcd.cpp:1994
 msgid "Preheating to cut"
 msgstr "Förvärmer för skära"
 
 #. MSG_PREHEATING_TO_EJECT c=20
-#: ../../Firmware/ultralcd.cpp:1998
+#: ../../Firmware/ultralcd.cpp:1991
 msgid "Preheating to eject"
 msgstr "Förvämer för utmatn"
 
 #. MSG_PREHEATING_TO_LOAD c=20
-#: ../../Firmware/ultralcd.cpp:1989
+#: ../../Firmware/ultralcd.cpp:1982
 msgid "Preheating to load"
 msgstr "Förvärmer för laddn"
 
 #. MSG_PREHEATING_TO_UNLOAD c=20
-#: ../../Firmware/ultralcd.cpp:1994
+#: ../../Firmware/ultralcd.cpp:1987
 msgid "Preheating to unload"
 msgstr "Förvärmer for utmatn"
 
@@ -1622,54 +1640,54 @@ msgid "Preparing blade"
 msgstr "Förbereder blad"
 
 #. MSG_PRESS_KNOB c=20
-#: ../../Firmware/ultralcd.cpp:1809
+#: ../../Firmware/ultralcd.cpp:1802
 msgid "Press the knob"
 msgstr "Tryck på knappen"
 
 #. MSG_PRESS_TO_PREHEAT c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:11563
+#: ../../Firmware/Marlin_main.cpp:11560
 msgid "Press the knob to preheat nozzle and continue."
 msgstr "Tryck på knappen för att förvärma munstycket och fortsätta."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:871
+#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:845
 msgid "Print aborted"
 msgstr "Utskriften avbröts"
 
 #. MSG_PRINT_FAN_SPEED c=15
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1144
-#: ../../Firmware/ultralcd.cpp:7322
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1137
+#: ../../Firmware/ultralcd.cpp:7304
 msgid "Print fan:"
 msgstr "Utskriftsfläkt:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5544
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5518
 msgid "Print from SD"
 msgstr "Skriv ut från SD"
 
 #. MSG_PRINT_PAUSED c=20
-#: ../../Firmware/ultralcd.cpp:885
+#: ../../Firmware/ultralcd.cpp:859
 msgid "Print paused"
 msgstr "Utskriften pausad"
 
 #. MSG_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2364
+#: ../../Firmware/ultralcd.cpp:2357
 msgid "Print time"
 msgstr "Utskriftstid"
 
 #. MSG_PRINTER_IP c=18
-#: ../../Firmware/ultralcd.cpp:1711
+#: ../../Firmware/ultralcd.cpp:1704
 msgid "Printer IP Addr:"
 msgstr "Skrivarens IP adr:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1526 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1522 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
 msgstr ""
-"Skrivaren har inte kalibrerats ännu. Vänligen följ manualen, kapitel Första stegen, avsnitt "
-"Kalibreringsflöde."
+"Skrivaren har inte kalibrerats ännu. Vänligen följ manualen, kapitel Första "
+"stegen, avsnitt Kalibreringsflöde."
 
 #. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
 #: ../../Firmware/util.cpp:289
@@ -1686,9 +1704,12 @@ msgstr ""
 "inställningarna. Utskriften avbröts."
 
 #. MSG_DESC_PULLEY_STALLED c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:200 ../../Firmware/mmu2/errors_list.h:240
+#: ../../Firmware/mmu2/errors_list.h:210 ../../Firmware/mmu2/errors_list.h:250
 msgid "Pulley motor stalled. Ensure the pulley can move and check the wiring."
-msgstr "Remskivans motor stannade. Se till att remskivan kan röra sig och kontrollera ledningarna."
+msgstr ""
+"Remskivans motor stannade. Se till att remskivan kan röra sig och "
+"kontrollera ledningarna."
+
 #. MSG_PROGRESS_PUSH_FILAMENT c=20
 #: ../../Firmware/mmu2_progress_converter.cpp:23
 #: ../../Firmware/mmu2_progress_converter.cpp:54
@@ -1696,68 +1717,70 @@ msgid "Pushing filament"
 msgstr "Pressar filament"
 
 #. MSG_TITLE_QUEUE_FULL c=20
-#: ../../Firmware/mmu2/errors_list.h:150 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:157 ../../Firmware/mmu2/errors_list.h:198
 msgid "QUEUE FULL"
 msgstr "KÖ FULL"
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4805
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4763
 msgid "RPi port"
 msgstr "RPi port"
 
 #. MSG_BED_CORRECTION_REAR c=14
-#: ../../Firmware/ultralcd.cpp:2753
+#: ../../Firmware/ultralcd.cpp:2746
 msgid "Rear side [μm]"
 msgstr "Baksida [μm]"
 
 #. MSG_RECOVERING_PRINT c=20
-#: ../../Firmware/Marlin_main.cpp:10899
+#: ../../Firmware/Marlin_main.cpp:10896
 msgid "Recovering print"
 msgstr "Återställer utskrift"
 
 #. MSG_REMOVE_OLD_FILAMENT c=20 r=5
-#: ../../Firmware/Marlin_main.cpp:3461
+#: ../../Firmware/Marlin_main.cpp:3458
 msgid "Remove old filament and press the knob to start loading new filament."
-msgstr "Ta bort det gamla filamentet och tryck på knappen för att börja ladda nytt filament."
+msgstr ""
+"Ta bort det gamla filamentet och tryck på knappen för att börja ladda nytt "
+"filament."
 
 #. MSG_RENAME c=18
-#: ../../Firmware/ultralcd.cpp:5435
+#: ../../Firmware/ultralcd.cpp:5409
 msgid "Rename"
 msgstr "Döp om"
 
 #. MSG_DESC_INVALID_TOOL c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:229 ../../Firmware/mmu2/errors_list.h:267
+#: ../../Firmware/mmu2/errors_list.h:239 ../../Firmware/mmu2/errors_list.h:280
 msgid ""
 "Requested filament tool is not available on this hardware. Check the G-code "
 "for tool index out of range (T0-T4)."
 msgstr ""
-"Begärt filamentverktyg är inte tillgängligt på denna hårdvara. Kontrollera G-codeen för verktygsindex "
-"utanför intervallet (T0-T4)."
+"Begärt filamentverktyg är inte tillgängligt på denna hårdvara. Kontrollera G-"
+"codeen för verktygsindex utanför intervallet (T0-T4)."
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2754
-#: ../../Firmware/ultralcd.cpp:5436
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:2747
+#: ../../Firmware/ultralcd.cpp:5410
 msgid "Reset"
 msgstr "Återställ"
 
 #. MSG_BTN_RESTART_MMU c=9
-#: ../../Firmware/mmu2/errors_list.h:283 ../../Firmware/mmu2/errors_list.h:293
+#: ../../Firmware/mmu2/errors_list.h:297 ../../Firmware/mmu2/errors_list.h:307
 msgid "Reset MMU"
 msgstr "Reset MMU"
 
 #. MSG_CALIBRATE_BED_RESET c=18
-#: ../../Firmware/ultralcd.cpp:4888
+#: ../../Firmware/ultralcd.cpp:4859
 msgid "Reset XYZ calibr."
 msgstr "Återställ XYZ-kal."
 
 #. MSG_RESUME_PRINT c=18
 #: ../../Firmware/Marlin_main.cpp:644 ../../Firmware/messages.cpp:85
-#: ../../Firmware/ultralcd.cpp:5530 ../../Firmware/ultralcd.cpp:5532
+#: ../../Firmware/ultralcd.cpp:5504 ../../Firmware/ultralcd.cpp:5506
 msgid "Resume print"
 msgstr "Återuppta utskrift"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:674
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:657
 msgid "Resuming print"
 msgstr "Återupptar utskrift"
 
@@ -1768,7 +1791,7 @@ msgid "Retract from FINDA"
 msgstr "Dra in från FINDA"
 
 #. MSG_BTN_RETRY c=8
-#: ../../Firmware/mmu2/errors_list.h:281 ../../Firmware/mmu2/errors_list.h:291
+#: ../../Firmware/mmu2/errors_list.h:295 ../../Firmware/mmu2/errors_list.h:305
 msgid "Retry"
 msgstr "Igen"
 
@@ -1779,59 +1802,58 @@ msgid "Returning selector"
 msgstr "Återvändande väljare"
 
 #. MSG_RIGHT c=10
-#: ../../Firmware/ultralcd.cpp:2495
+#: ../../Firmware/ultralcd.cpp:2488
 msgid "Right"
 msgstr "Höger"
 
 #. MSG_BED_CORRECTION_RIGHT c=14
-#: ../../Firmware/ultralcd.cpp:2751
+#: ../../Firmware/ultralcd.cpp:2744
 msgid "Right side[μm]"
 msgstr "Höger sida[μm]"
 
 #. MSG_WIZARD_RERUN c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3857
+#: ../../Firmware/ultralcd.cpp:3846
 msgid ""
 "Running Wizard will delete current calibration results and start from the "
 "beginning. Continue?"
 msgstr ""
-"Att utföra guiden kommer att radera aktuella kalibreringsinställningar och börja om från början. "
-"Fortsätta?"
+"Att utföra guiden kommer att radera aktuella kalibreringsinställningar och "
+"börja om från början. Fortsätta?"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4393
-#: ../../Firmware/ultralcd.cpp:4395 ../../Firmware/ultralcd.cpp:4412
-#: ../../Firmware/ultralcd.cpp:4414
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4775
+#: ../../Firmware/ultralcd.cpp:4777
 msgid "SD card"
 msgstr "SD-kort"
 
 #. MSG_TITLE_SELECTOR_CANNOT_HOME c=20
-#: ../../Firmware/mmu2/errors_list.h:125 ../../Firmware/mmu2/errors_list.h:162
+#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
 msgid "SELECTOR CANNOT HOME"
 msgstr "VÄLJARE FASTNAT"
 
 #. MSG_TITLE_SELECTOR_CANNOT_MOVE c=20
-#: ../../Firmware/mmu2/errors_list.h:124 ../../Firmware/mmu2/errors_list.h:163
+#: ../../Firmware/mmu2/errors_list.h:130 ../../Firmware/mmu2/errors_list.h:170
 msgid "SELECTOR CANNOT MOVE"
 msgstr "VÄLJARE FASTNAT"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9706 ../../Firmware/messages.cpp:112
+#: ../../Firmware/Marlin_main.cpp:9703 ../../Firmware/messages.cpp:112
 msgid "STOPPED."
 msgstr "STOPPAD."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
-#: ../../Firmware/Marlin_main.cpp:3286 ../../Firmware/Marlin_main.cpp:3308
+#: ../../Firmware/Marlin_main.cpp:3283 ../../Firmware/Marlin_main.cpp:3305
 #: ../../Firmware/mesh_bed_calibration.cpp:2233 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Söker efter kalibreringspunkt för bädden"
 
 #. MSG_SELECT c=18
-#: ../../Firmware/ultralcd.cpp:5428
+#: ../../Firmware/ultralcd.cpp:5402
 msgid "Select"
 msgstr "Välj"
 
 #. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
-#: ../../Firmware/ultralcd.cpp:3932
+#: ../../Firmware/ultralcd.cpp:3921
 msgid ""
 "Select a filament for the First Layer Calibration and select it in the on-"
 "screen menu."
@@ -1839,30 +1861,30 @@ msgstr ""
 "Välj ett filament för första lagrets kalibrering och välj det i skärmmenyn."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:3519 ../../Firmware/Tcodes.cpp:35
+#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/Tcodes.cpp:35
 #: ../../Firmware/Tcodes.cpp:51 ../../Firmware/messages.cpp:52
 msgid "Select extruder:"
 msgstr "Välj extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Tcodes.cpp:33 ../../Firmware/messages.cpp:53
-#: ../../Firmware/ultralcd.cpp:3805
+#: ../../Firmware/ultralcd.cpp:3794
 msgid "Select filament:"
 msgstr "Välj filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3650
-#: ../../Firmware/ultralcd.cpp:4812
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:3639
+#: ../../Firmware/ultralcd.cpp:4770
 msgid "Select language"
 msgstr "Välj språk"
 
 #. MSG_SEL_PREHEAT_TEMP c=20 r=6
-#: ../../Firmware/ultralcd.cpp:4084
+#: ../../Firmware/ultralcd.cpp:4073
 msgid "Select nozzle preheat temperature which matches your material."
 msgstr "Välj munstycksförvärmningstemperatur som passar ditt material."
 
 #. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3937
+#: ../../Firmware/ultralcd.cpp:3926
 msgid "Select temperature which matches your material."
 msgstr "Välj temperatur som passar ditt material."
 
@@ -1873,61 +1895,62 @@ msgid "Selecting fil. slot"
 msgstr "Välj fil. spår"
 
 #. MSG_SELFTEST_OK c=20
-#: ../../Firmware/ultralcd.cpp:6522
+#: ../../Firmware/ultralcd.cpp:6504
 msgid "Self test OK"
 msgstr "Självtest OK"
 
 #. MSG_SELFTEST_START c=20
-#: ../../Firmware/ultralcd.cpp:6295
+#: ../../Firmware/ultralcd.cpp:6277
 msgid "Self test start"
 msgstr "Självteststart"
 
 #. MSG_SELFTEST c=18
-#: ../../Firmware/ultralcd.cpp:4875
+#: ../../Firmware/ultralcd.cpp:4846
 msgid "Selftest"
 msgstr "Självtest"
 
 #. MSG_SELFTEST_ERROR c=20
-#: ../../Firmware/ultralcd.cpp:6961
+#: ../../Firmware/ultralcd.cpp:6943
 msgid "Selftest error!"
 msgstr "Självtestfel!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6526
-#: ../../Firmware/ultralcd.cpp:7048 ../../Firmware/ultralcd.cpp:7312
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:6508
+#: ../../Firmware/ultralcd.cpp:7030 ../../Firmware/ultralcd.cpp:7294
 msgid "Selftest failed"
 msgstr "Självtestet felade"
 
 #. MSG_FORCE_SELFTEST c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545
+#: ../../Firmware/Marlin_main.cpp:1541
 msgid "Selftest will be run to calibrate accurate sensorless rehoming."
-msgstr "Självtest kommer att utföras för att kalibrera exakt sensorlös hemposition."
+msgstr ""
+"Självtest kommer att utföras för att kalibrera exakt sensorlös hemposition."
 
 #. MSG_INFO_SENSORS c=18
-#: ../../Firmware/ultralcd.cpp:1723
+#: ../../Firmware/ultralcd.cpp:1716
 msgid "Sensor info"
 msgstr "Sensorinfo"
 
 #. MSG_FS_VERIFIED c=20 r=3
-#: ../../Firmware/ultralcd.cpp:6262
+#: ../../Firmware/ultralcd.cpp:6244
 msgid "Sensor verified, remove the filament now."
 msgstr "Sensor verifierad, ta bort filamentet nu."
 
 #. MSG_SET_TEMPERATURE c=20
-#: ../../Firmware/ultralcd.cpp:2771
+#: ../../Firmware/ultralcd.cpp:2764
 msgid "Set temperature:"
 msgstr "Sätt temperatur:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3508
-#: ../../Firmware/ultralcd.cpp:3667 ../../Firmware/ultralcd.cpp:4168
-#: ../../Firmware/ultralcd.cpp:5593 ../../Firmware/ultralcd.cpp:5825
-#: ../../Firmware/ultralcd.cpp:5878
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:3497
+#: ../../Firmware/ultralcd.cpp:3656 ../../Firmware/ultralcd.cpp:4157
+#: ../../Firmware/ultralcd.cpp:5567 ../../Firmware/ultralcd.cpp:5799
+#: ../../Firmware/ultralcd.cpp:5852
 msgid "Settings"
 msgstr "Inställningar"
 
 #. MSG_SEVERE_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2538
+#: ../../Firmware/ultralcd.cpp:2531
 msgid "Severe skew"
 msgstr "Hög skevhet"
 
@@ -1938,7 +1961,7 @@ msgid "Sheet"
 msgstr "Skiva"
 
 #. MSG_SHEET_OFFSET c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3795
+#: ../../Firmware/ultralcd.cpp:3784
 msgid ""
 "Sheet %.7s\n"
 "Z offset: %+1.3fmm\n"
@@ -1951,18 +1974,18 @@ msgstr ""
 "%cÅterställ"
 
 #. MSG_SHOW_END_STOPS c=18
-#: ../../Firmware/ultralcd.cpp:4886
+#: ../../Firmware/ultralcd.cpp:4857
 msgid "Show end stops"
 msgstr "Visa ändlägen"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4359
-#: ../../Firmware/ultralcd.cpp:4454 ../../Firmware/ultralcd.cpp:5776
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:4348
+#: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:5750
 msgid "Silent"
 msgstr "Tyst"
 
 #. MSG_SLIGHT_SKEW c=14
-#: ../../Firmware/ultralcd.cpp:2537
+#: ../../Firmware/ultralcd.cpp:2530
 msgid "Slight skew"
 msgstr "Låg skevhet"
 
@@ -1976,13 +1999,13 @@ msgstr ""
 "sortering är 100."
 
 #. MSG_ZLEVELING_ENFORCED c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:3052
+#: ../../Firmware/Marlin_main.cpp:3049
 msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Ett problem har uppstått, Z-nivellering utförs..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4401
-#: ../../Firmware/ultralcd.cpp:4402 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4780
+#: ../../Firmware/ultralcd.cpp:4781 ../../Firmware/ultralcd.cpp:4782
 msgid "Sort"
 msgstr "Sortera"
 
@@ -1991,71 +2014,72 @@ msgstr "Sortera"
 #: ../../Firmware/messages.cpp:100
 msgid "Sorting files"
 msgstr "Sorterar filer"
+
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4448
-#: ../../Firmware/ultralcd.cpp:4451 ../../Firmware/ultralcd.cpp:4454
-#: ../../Firmware/ultralcd.cpp:4457 ../../Firmware/ultralcd.cpp:4460
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4406
+#: ../../Firmware/ultralcd.cpp:4409 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/ultralcd.cpp:4415 ../../Firmware/ultralcd.cpp:4418
 msgid "Sound"
 msgstr "Ljud"
 
 #. MSG_SPEED c=15
-#: ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/ultralcd.cpp:5705
 msgid "Speed"
 msgstr "Fart"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7164
-#: ../../Firmware/ultralcd.cpp:7179 ../../Firmware/ultralcd.cpp:7187
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7146
+#: ../../Firmware/ultralcd.cpp:7161 ../../Firmware/ultralcd.cpp:7169
 msgid "Spinning"
 msgstr "Rotation"
 
 #. MSG_TEMP_CAL_WARNING c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:4910
+#: ../../Firmware/Marlin_main.cpp:4907
 msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
 msgstr "Stabil omgivningstemperatur 21-26C krävs samt ett styvt stativ."
 
 #. MSG_STATISTICS c=18
-#: ../../Firmware/ultralcd.cpp:5598
+#: ../../Firmware/ultralcd.cpp:5572
 msgid "Statistics"
 msgstr "Statistik"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4336
-#: ../../Firmware/ultralcd.cpp:4380 ../../Firmware/ultralcd.cpp:5768
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:4325
+#: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:5742
 msgid "Stealth"
 msgstr "Tyst"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4726
-#: ../../Firmware/ultralcd.cpp:5425
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:4684
+#: ../../Firmware/ultralcd.cpp:5399
 msgid "Steel sheets"
 msgstr "Metallskivor"
 
 #. MSG_BTN_STOP c=8
-#: ../../Firmware/mmu2/errors_list.h:285 ../../Firmware/mmu2/errors_list.h:295
+#: ../../Firmware/mmu2/errors_list.h:299 ../../Firmware/mmu2/errors_list.h:309
 msgid "Stop"
 msgstr "Stopp"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5537
-#: ../../Firmware/ultralcd.cpp:5996
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5511
+#: ../../Firmware/ultralcd.cpp:5978
 msgid "Stop print"
 msgstr "Stoppa utskriften"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4497
-#: ../../Firmware/ultralcd.cpp:4579 ../../Firmware/ultralcd.cpp:4618
-#: ../../Firmware/ultralcd.cpp:4659
+#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4455
+#: ../../Firmware/ultralcd.cpp:4537 ../../Firmware/ultralcd.cpp:4576
+#: ../../Firmware/ultralcd.cpp:4617
 msgid "Strict"
 msgstr "Strikt"
 
 #. MSG_SUPPORT c=18
-#: ../../Firmware/ultralcd.cpp:5607
+#: ../../Firmware/ultralcd.cpp:5581
 msgid "Support"
 msgstr "Support"
 
 #. MSG_SELFTEST_SWAPPED c=16
-#: ../../Firmware/ultralcd.cpp:7020
+#: ../../Firmware/ultralcd.cpp:7002
 msgid "Swapped"
 msgstr "Utbytt"
 
@@ -2064,63 +2088,53 @@ msgstr "Utbytt"
 msgid "THERMAL ANOMALY"
 msgstr "TERMISK ANOMALI"
 
-#. MSG_TM_AUTOTUNE_FAILED c=20
-#: ../../Firmware/temperature.cpp:2897
-msgid "TM autotune failed"
-msgstr "TM autoinst fallerad"
-
 #. MSG_TITLE_TMC_DRIVER_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:172
-#: ../../Firmware/mmu2/errors_list.h:173 ../../Firmware/mmu2/errors_list.h:174
+#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:179
+#: ../../Firmware/mmu2/errors_list.h:180 ../../Firmware/mmu2/errors_list.h:181
 msgid "TMC DRIVER ERROR"
 msgstr "TMC DRIVER FEL"
 
 #. MSG_TITLE_TMC_DRIVER_RESET c=20
-#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:175
-#: ../../Firmware/mmu2/errors_list.h:176 ../../Firmware/mmu2/errors_list.h:177
+#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:182
+#: ../../Firmware/mmu2/errors_list.h:183 ../../Firmware/mmu2/errors_list.h:184
 msgid "TMC DRIVER RESET"
 msgstr "TMC DRIVER RESET"
 
 #. MSG_TITLE_TMC_DRIVER_SHORTED c=20
-#: ../../Firmware/mmu2/errors_list.h:143 ../../Firmware/mmu2/errors_list.h:181
-#: ../../Firmware/mmu2/errors_list.h:182 ../../Firmware/mmu2/errors_list.h:183
+#: ../../Firmware/mmu2/errors_list.h:149 ../../Firmware/mmu2/errors_list.h:188
+#: ../../Firmware/mmu2/errors_list.h:189 ../../Firmware/mmu2/errors_list.h:190
 msgid "TMC DRIVER SHORTED"
 msgstr "TMC DRIVER KORTSLUTN"
 
 #. MSG_TITLE_TMC_OVERHEAT_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:131 ../../Firmware/mmu2/errors_list.h:169
-#: ../../Firmware/mmu2/errors_list.h:170 ../../Firmware/mmu2/errors_list.h:171
+#: ../../Firmware/mmu2/errors_list.h:137 ../../Firmware/mmu2/errors_list.h:176
+#: ../../Firmware/mmu2/errors_list.h:177 ../../Firmware/mmu2/errors_list.h:178
 msgid "TMC OVERHEAT ERROR"
 msgstr "TMC ÖVERHETTNINGSFEL"
 
 #. MSG_TITLE_TMC_UNDERVOLTAGE_ERROR c=20
-#: ../../Firmware/mmu2/errors_list.h:140 ../../Firmware/mmu2/errors_list.h:178
-#: ../../Firmware/mmu2/errors_list.h:179 ../../Firmware/mmu2/errors_list.h:180
+#: ../../Firmware/mmu2/errors_list.h:146 ../../Firmware/mmu2/errors_list.h:185
+#: ../../Firmware/mmu2/errors_list.h:186 ../../Firmware/mmu2/errors_list.h:187
 msgid "TMC UNDERVOLTAGE ERR"
 msgstr "TMC UNDERSPÄNNINGFEL"
 
-#. MSG_TEMP_MODEL_AUTOTUNE c=20
-#: ../../Firmware/temperature.cpp:2882
-msgid "Temp. model autotune"
-msgstr "Temp modell autoinst"
-
 #. MSG_TEMPERATURE c=18
-#: ../../Firmware/ultralcd.cpp:4759
+#: ../../Firmware/ultralcd.cpp:4717
 msgid "Temperature"
 msgstr "Temperatur"
 
 #. MSG_MENU_TEMPERATURES c=18
-#: ../../Firmware/ultralcd.cpp:1729
+#: ../../Firmware/ultralcd.cpp:1722
 msgid "Temperatures"
 msgstr "Temperaturer"
 
 #. MSG_TESTING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:426
+#: ../../Firmware/messages.cpp:59 ../../Firmware/mmu2.cpp:444
 msgid "Testing filament"
 msgstr "Testar filament"
 
 #. MSG_DESC_IDLER_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:205 ../../Firmware/mmu2/errors_list.h:244
+#: ../../Firmware/mmu2/errors_list.h:215 ../../Firmware/mmu2/errors_list.h:254
 msgid ""
 "The Idler cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2128,16 +2142,16 @@ msgstr ""
 "blockerar dess rörelse."
 
 #. MSG_DESC_FW_UPDATE_NEEDED c=20 r=9
-#: ../../Firmware/mmu2/errors_list.h:231 ../../Firmware/mmu2/errors_list.h:269
+#: ../../Firmware/mmu2/errors_list.h:241 ../../Firmware/mmu2/errors_list.h:282
 msgid ""
 "The MMU unit reports its FW version incompatible with the printer's "
 "firmware. Make sure the MMU firmware is up to date."
 msgstr ""
-"MMU-enheten rapporterar att FW-versionen är inkompatibelmed din skrivare. Säkerställ att MMU-"
-"firmwaren är aktuell."
+"MMU-enheten rapporterar att FW-versionen är inkompatibelmed din skrivare. "
+"Säkerställ att MMU-firmwaren är aktuell."
 
 #. MSG_DESC_SELECTOR_CANNOT_HOME c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:202 ../../Firmware/mmu2/errors_list.h:242
+#: ../../Firmware/mmu2/errors_list.h:212 ../../Firmware/mmu2/errors_list.h:252
 msgid ""
 "The Selector cannot home properly. Check for anything blocking its movement."
 msgstr ""
@@ -2145,7 +2159,7 @@ msgstr ""
 "blockerar dess rörelse."
 
 #. MSG_WIZARD_V2_CAL_2 c=20 r=12
-#: ../../Firmware/ultralcd.cpp:3940
+#: ../../Firmware/ultralcd.cpp:3929
 msgid ""
 "The printer will start printing a zig-zag line. Rotate the knob until you "
 "reach the optimal height. Check the pictures in the handbook (Calibration "
@@ -2155,7 +2169,7 @@ msgstr ""
 "optimal höjd. Kontrollera med bilderna i handboken (Kalibreringskapitlet)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1539 ../../Firmware/messages.cpp:43
+#: ../../Firmware/Marlin_main.cpp:1535 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -2164,71 +2178,71 @@ msgstr ""
 "kap Första stegen, avs Kalibreringsflöde."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4401
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4780
 msgid "Time"
 msgstr "Tid"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5863
+#: ../../Firmware/messages.cpp:158 ../../Firmware/ultralcd.cpp:5837
 msgid "Timeout"
 msgstr "Timeout"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1167
-#: ../../Firmware/ultralcd.cpp:1300
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:1160
+#: ../../Firmware/ultralcd.cpp:1293
 msgid "Total"
 msgstr "Total"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1214
-#: ../../Firmware/ultralcd.cpp:1244 ../../Firmware/ultralcd.cpp:1330
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:1207
+#: ../../Firmware/ultralcd.cpp:1237 ../../Firmware/ultralcd.cpp:1323
 msgid "Total failures"
 msgstr "Totala fel"
 
 #. MSG_TOTAL_FILAMENT c=19
-#: ../../Firmware/ultralcd.cpp:2385
+#: ../../Firmware/ultralcd.cpp:2378
 msgid "Total filament"
 msgstr "Total filament"
 
 #. MSG_TOTAL_PRINT_TIME c=19
-#: ../../Firmware/ultralcd.cpp:2386
+#: ../../Firmware/ultralcd.cpp:2379
 msgid "Total print time"
 msgstr "Tot utskriftstid"
 
 #. MSG_TUNE c=18
-#: ../../Firmware/ultralcd.cpp:5509
+#: ../../Firmware/ultralcd.cpp:5483
 msgid "Tune"
 msgstr "Ställ in"
 
 #. MSG_TITLE_UNLOAD_MANUALLY c=20
-#: ../../Firmware/mmu2/errors_list.h:153 ../../Firmware/mmu2/errors_list.h:191
+#: ../../Firmware/mmu2/errors_list.h:160 ../../Firmware/mmu2/errors_list.h:201
 msgid "UNLOAD MANUALLY"
 msgstr "LADDA UR MANUELLT"
 
 #. MSG_DESC_UNLOAD_MANUALLY c=20 r=8
-#: ../../Firmware/mmu2/errors_list.h:233 ../../Firmware/mmu2/errors_list.h:271
+#: ../../Firmware/mmu2/errors_list.h:243 ../../Firmware/mmu2/errors_list.h:284
 msgid ""
 "Unexpected FINDA reading. Ensure no filament is under FINDA and the selector "
 "is free. Check FINDA connection."
 msgstr ""
-"Oväntad FINDA-AVläsning. Se till att inget filament är under FINDA ochatt väljaren är fri. "
-"Kontrollera FINDA anslutninig."
+"Oväntad FINDA-AVläsning. Se till att inget filament är under FINDA ochatt "
+"väljaren är fri. Kontrollera FINDA anslutninig."
 
 #. MSG_BTN_UNLOAD c=8
-#: ../../Firmware/mmu2/errors_list.h:284 ../../Firmware/mmu2/errors_list.h:294
+#: ../../Firmware/mmu2/errors_list.h:298 ../../Firmware/mmu2/errors_list.h:308
 msgid "Unload"
 msgstr "Ladda ur"
 
 #. MSG_UNLOAD_FILAMENT c=16
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5574
-#: ../../Firmware/ultralcd.cpp:5591
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:5548
+#: ../../Firmware/ultralcd.cpp:5565
 msgid "Unload filament"
 msgstr "Ta bort filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3502 ../../Firmware/messages.cpp:116
+#: ../../Firmware/Marlin_main.cpp:3499 ../../Firmware/messages.cpp:116
 #: ../../Firmware/mmu2_progress_converter.cpp:50
-#: ../../Firmware/ultralcd.cpp:5193
+#: ../../Firmware/ultralcd.cpp:5167
 msgid "Unloading filament"
 msgstr "Tar bort filament"
 
@@ -2245,23 +2259,23 @@ msgid "Unloading to pulley"
 msgstr "Ladd ur t. remskiva"
 
 #. MSG_FIL_FAILED c=20 r=5
-#: ../../Firmware/ultralcd.cpp:6265
+#: ../../Firmware/ultralcd.cpp:6247
 msgid "Verification failed, remove the filament and try again."
 msgstr "Verifieringen felade, ta bort filamentet, försök igen."
 
 #. MSG_MENU_VOLTAGES c=18
-#: ../../Firmware/ultralcd.cpp:1732
+#: ../../Firmware/ultralcd.cpp:1725
 msgid "Voltages"
 msgstr "Spänning"
 
 #. MSG_TITLE_TMC_WARNING_TMC_TOO_HOT c=20
-#: ../../Firmware/mmu2/errors_list.h:128 ../../Firmware/mmu2/errors_list.h:166
-#: ../../Firmware/mmu2/errors_list.h:167 ../../Firmware/mmu2/errors_list.h:168
+#: ../../Firmware/mmu2/errors_list.h:134 ../../Firmware/mmu2/errors_list.h:173
+#: ../../Firmware/mmu2/errors_list.h:174 ../../Firmware/mmu2/errors_list.h:175
 msgid "WARNING TMC TOO HOT"
 msgstr "VARNING TMC FÖR VARM"
 
 #. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
-#: ../../Firmware/ultralcd.cpp:3551
+#: ../../Firmware/ultralcd.cpp:3540
 msgid ""
 "WARNING:\n"
 "Crash detection\n"
@@ -2274,198 +2288,194 @@ msgstr ""
 "tyst-läge"
 
 #. MSG_USERWAIT c=20
-#: ../../Firmware/Marlin_main.cpp:4115
+#: ../../Firmware/Marlin_main.cpp:4112
 msgid "Wait for user..."
 msgstr "Väntar på användare."
 
 #. MSG_WAITING_TEMP_PINDA c=20 r=3
-#: ../../Firmware/ultralcd.cpp:2879
+#: ../../Firmware/ultralcd.cpp:2872
 msgid "Waiting for PINDA probe cooling"
 msgstr "Väntar på PINDA-sondens kylning"
 
 #. MSG_WAITING_TEMP c=20 r=4
-#: ../../Firmware/ultralcd.cpp:2911
+#: ../../Firmware/ultralcd.cpp:2904
 msgid "Waiting for nozzle and bed cooling"
 msgstr "Väntar på munstycks- och bäddkylning"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4494
-#: ../../Firmware/ultralcd.cpp:4576 ../../Firmware/ultralcd.cpp:4615
-#: ../../Firmware/ultralcd.cpp:4656
+#: ../../Firmware/messages.cpp:131 ../../Firmware/ultralcd.cpp:4452
+#: ../../Firmware/ultralcd.cpp:4534 ../../Firmware/ultralcd.cpp:4573
+#: ../../Firmware/ultralcd.cpp:4614
 msgid "Warn"
 msgstr "Varna"
 
 #. MSG_CHANGED_BOTH c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1505
+#: ../../Firmware/Marlin_main.cpp:1501
 msgid "Warning: both printer type and motherboard type changed."
 msgstr "Varning: både skrivartyp och moderkortstyp har ändrats."
 
 #. MSG_CHANGED_MOTHERBOARD c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1497
+#: ../../Firmware/Marlin_main.cpp:1493
 msgid "Warning: motherboard type changed."
 msgstr "Varning: moderkortstyp ändrad."
 
 #. MSG_CHANGED_PRINTER c=20 r=4
-#: ../../Firmware/Marlin_main.cpp:1501
+#: ../../Firmware/Marlin_main.cpp:1497
 msgid "Warning: printer type changed."
 msgstr "Varning: skrivartyp ändrats."
 
 #. MSG_UNLOAD_SUCCESSFUL c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:3574
+#: ../../Firmware/Marlin_main.cpp:3571
 msgid "Was filament unload successful?"
 msgstr "Lyckades filamentutmatningen?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6972
-#: ../../Firmware/ultralcd.cpp:6976 ../../Firmware/ultralcd.cpp:6996
-#: ../../Firmware/ultralcd.cpp:7002 ../../Firmware/ultralcd.cpp:7026
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:6954
+#: ../../Firmware/ultralcd.cpp:6958 ../../Firmware/ultralcd.cpp:6978
+#: ../../Firmware/ultralcd.cpp:6984 ../../Firmware/ultralcd.cpp:7008
 msgid "Wiring error"
 msgstr "Kabelfel"
 
 #. MSG_WIZARD c=17
-#: ../../Firmware/ultralcd.cpp:4866
+#: ../../Firmware/ultralcd.cpp:4837
 msgid "Wizard"
 msgstr "Guide"
 
 #. MSG_X_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4172
+#: ../../Firmware/ultralcd.cpp:4161
 msgid "X-correct:"
 msgstr "X-korrektion:"
 
 #. MSG_XFLASH c=18
-#: ../../Firmware/ultralcd.cpp:5609
+#: ../../Firmware/ultralcd.cpp:5583
 msgid "XFLASH init"
 msgstr "XFLASH init"
 
 #. MSG_XYZ_DETAILS c=18
-#: ../../Firmware/ultralcd.cpp:1721
+#: ../../Firmware/ultralcd.cpp:1714
 msgid "XYZ cal. details"
 msgstr "XYZ kal. detaljer"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3356
+#: ../../Firmware/ultralcd.cpp:3345
 msgid "XYZ calibration all right. Skew will be corrected automatically."
 msgstr "XYZ-kalibrering ok. Skevhet kommer att korrigeras automatiskt."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3353
+#: ../../Firmware/ultralcd.cpp:3342
 msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
 msgstr "XYZ-kalibrering ok. X/Y-axlarna är mycket lite skeva. Bra jobbat!"
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3334
+#: ../../Firmware/ultralcd.cpp:3323
 msgid "XYZ calibration compromised. Front calibration points not reachable."
 msgstr "XYZ-kalibrering komprometterad. Främre kalibreringspunkt kan ej nås."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3340
-msgid ""
-"XYZ calibration compromised. Left front calibration point not reachable."
-msgstr "XYZ-kalibrering komprometterad. Främre vä kalibreringspunkt kan ej nås."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3337
+#: ../../Firmware/ultralcd.cpp:3326
 msgid ""
 "XYZ calibration compromised. Right front calibration point not reachable."
 msgstr ""
 "XYZ-kalibrering komprometterad. Främre hö kalibreringspunkter kan ej nås."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3316
+#: ../../Firmware/ultralcd.cpp:3305
 msgid "XYZ calibration failed. Bed calibration point was not found."
 msgstr "XYZ-kalibrering felade. Kalibreringspunkter ej funna."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3322
+#: ../../Firmware/ultralcd.cpp:3311
 msgid "XYZ calibration failed. Front calibration points not reachable."
 msgstr "XYZ-kalibrering felade. Främre kalibreringspunkt kan ej nås."
 
-#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3328
-msgid "XYZ calibration failed. Left front calibration point not reachable."
-msgstr "XYZ-kalibrering felade. Främre vä kalibreringspunkt kan ej nås."
-
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3319
-#: ../../Firmware/ultralcd.cpp:3347
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3308
+#: ../../Firmware/ultralcd.cpp:3336
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ-kalibrering felade. Se bruksanvisningen."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
-#: ../../Firmware/ultralcd.cpp:3325
+#: ../../Firmware/ultralcd.cpp:3314
 msgid "XYZ calibration failed. Right front calibration point not reachable."
 msgstr "XYZ-kalibrering felade. Höger främre kalibreringspunkt kan ej nås."
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
-#: ../../Firmware/ultralcd.cpp:3350
+#: ../../Firmware/ultralcd.cpp:3339
 msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
 msgstr "XYZ-kalibrering ok. X/Y-axlarna ar vinkelräta. Grattis!"
 
 #. MSG_Y_DIST_FROM_MIN c=20
-#: ../../Firmware/ultralcd.cpp:2492
+#: ../../Firmware/ultralcd.cpp:2485
 msgid "Y distance from min"
 msgstr "Y avstånd från min"
 
 #. MSG_Y_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4173
+#: ../../Firmware/ultralcd.cpp:4162
 msgid "Y-correct:"
 msgstr "Y-korrekt:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2228
-#: ../../Firmware/ultralcd.cpp:2798 ../../Firmware/ultralcd.cpp:3170
-#: ../../Firmware/ultralcd.cpp:4747 ../../Firmware/ultralcd.cpp:5998
+#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:2221
+#: ../../Firmware/ultralcd.cpp:2791 ../../Firmware/ultralcd.cpp:3163
+#: ../../Firmware/ultralcd.cpp:4705 ../../Firmware/ultralcd.cpp:5980
 msgid "Yes"
 msgstr "Ja"
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4149
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4138
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Du kan alltid återuppta guiden från Kalibrering -> Guide."
 
 #. MSG_Z_CORRECTION c=13
-#: ../../Firmware/ultralcd.cpp:4174
+#: ../../Firmware/ultralcd.cpp:4163
 msgid "Z-correct:"
 msgstr "Z-korrekt:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5833
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:5807
 msgid "Z-probe nr."
 msgstr "Z-sond nr."
 
 #. MSG_MEASURED_OFFSET c=20
-#: ../../Firmware/ultralcd.cpp:2563
+#: ../../Firmware/ultralcd.cpp:2556
 msgid "[0;0] point offset"
 msgstr "[0;0] punktförskjutn"
 
 #. MSG_PRESS c=20 r=2
-#: ../../Firmware/ultralcd.cpp:2170
+#: ../../Firmware/ultralcd.cpp:2163
 msgid "and press the knob"
 msgstr "och tryck på knapp"
 
 #. MSG_TO_LOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1817
+#: ../../Firmware/ultralcd.cpp:1810
 msgid "to load filament"
 msgstr "att ladda filament"
 
 #. MSG_TO_UNLOAD_FIL c=20
-#: ../../Firmware/ultralcd.cpp:1821
+#: ../../Firmware/ultralcd.cpp:1814
 msgid "to unload filament"
 msgstr "att ta bort filament"
 
 #. MSG_UNKNOWN c=13
-#: ../../Firmware/ultralcd.cpp:1688
+#: ../../Firmware/ultralcd.cpp:1681
 msgid "unknown"
 msgstr "okänd"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/Filament_sensor.cpp:291 ../../Firmware/messages.cpp:166
+#: ../../Firmware/Filament_sensor.cpp:293 ../../Firmware/messages.cpp:166
 msgid "unknown state"
 msgstr "okänt stat"
 
+#. MSG_BTN_MORE c=8
+#. @todo convert to PROGMEM_N1
+#: ../../Firmware/mmu2/errors_list.h:301
+#: ../../Firmware/mmu2_error_converter.cpp:167
+msgid "⏬"
+msgstr "⏬"
+
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6086
-#: ../../Firmware/ultralcd.cpp:6089
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:6068
+#: ../../Firmware/ultralcd.cpp:6071
 msgid "🔃Refresh"
 msgstr "🔃Uppdatera"
 
@@ -2532,3 +2542,17 @@ msgstr "🔃Uppdatera"
 
 #~ msgid "Runouts"
 #~ msgstr "Avbrott"
+
+#~ msgid "TM autotune failed"
+#~ msgstr "TM autoinst fallerad"
+
+#~ msgid "Temp. model autotune"
+#~ msgstr "Temp modell autoinst"
+
+#~ msgid ""
+#~ "XYZ calibration compromised. Left front calibration point not reachable."
+#~ msgstr ""
+#~ "XYZ-kalibrering komprometterad. Främre vä kalibreringspunkt kan ej nås."
+
+#~ msgid "XYZ calibration failed. Left front calibration point not reachable."
+#~ msgstr "XYZ-kalibrering felade. Främre vä kalibreringspunkt kan ej nås."