Isolate farm preheat config

Firmware/Prusa_farm.h

@@ -3,6 +3,9 @@
 #include <inttypes.h>
 #include "Configuration.h"
 
+#define FARM_PREHEAT_HOTEND_TEMP 250
+#define FARM_PREHEAT_HPB_TEMP 80
+
 #define FARM_DEFAULT_SAFETYTIMER_TIME_ms (45*60*1000ul)
 #define NC_TIME 10 //time in s for periodic important status messages sending which needs reponse from monitoring
 #define NC_BUTTON_LONG_PRESS 15 //time in s

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -378,9 +378,6 @@
  PREHEAT SETTINGS
  *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
 

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -379,9 +379,6 @@
  PREHEAT SETTINGS
  *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
 

Firmware/variants/1_75mm_MK25S-RAMBo10a-E3Dv6full.h

@@ -378,9 +378,6 @@
  PREHEAT SETTINGS
  *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
 

Firmware/variants/1_75mm_MK25S-RAMBo13a-E3Dv6full.h

@@ -379,9 +379,6 @@
  PREHEAT SETTINGS
  *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
 

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -533,9 +533,6 @@
  PREHEAT SETTINGS
  *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
 

Firmware/variants/1_75mm_MK3S-EINSy10a-E3Dv6full.h

@@ -537,9 +537,6 @@
  PREHEAT SETTINGS
  *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 60
 

Firmware/variants/obsolete/1_75mm_MK2-RAMBo13a-E3Dv6full.h

@@ -299,9 +299,6 @@ BED SETTINGS
 PREHEAT SETTINGS
 *------------------------------------*/
 
-#define FARM_PREHEAT_HOTEND_TEMP 250
-#define FARM_PREHEAT_HPB_TEMP 80
-
 #define PLA_PREHEAT_HOTEND_TEMP 215
 #define PLA_PREHEAT_HPB_TEMP 55