|
|
@@ -1,4 +1,5 @@
|
|
|
#include "mmu2.h"
|
|
|
+#include "mmu2_config.h"
|
|
|
#include "mmu2_error_converter.h"
|
|
|
#include "mmu2_fsensor.h"
|
|
|
#include "mmu2_log.h"
|
|
|
@@ -17,76 +18,6 @@
|
|
|
#include "cardreader.h" // for IS_SD_PRINTING
|
|
|
#include "SpoolJoin.h"
|
|
|
|
|
|
-// As of FW 3.12 we only support building the FW with only one extruder, all the multi-extruder infrastructure will be removed.
|
|
|
-// Saves at least 800B of code size
|
|
|
-static_assert(EXTRUDERS==1);
|
|
|
-
|
|
|
-// Settings for filament load / unload from the LCD menu.
|
|
|
-// This is for Prusa MK3-style extruders. Customize for your hardware.
|
|
|
-#define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
|
|
|
-
|
|
|
-#define NOZZLE_PARK_XY_FEEDRATE 50
|
|
|
-#define NOZZLE_PARK_Z_FEEDRATE 15
|
|
|
-
|
|
|
-// Nominal distance from the extruder gear to the nozzle tip is 87mm
|
|
|
-// However, some slipping may occur and we need separate distances for
|
|
|
-// LoadToNozzle and ToolChange.
|
|
|
-// - +5mm seemed good for LoadToNozzle,
|
|
|
-// - but too much (made blobs) for a ToolChange
|
|
|
-static constexpr float MMU2_LOAD_TO_NOZZLE_LENGTH = 87.0F + 5.0F;
|
|
|
-
|
|
|
-// As discussed with our PrusaSlicer profile specialist
|
|
|
-// - ToolChange shall not try to push filament into the very tip of the nozzle
|
|
|
-// to have some space for additional G-code to tune the extruded filament length
|
|
|
-// in the profile
|
|
|
-// Beware - this value is used to initialize the MMU logic layer - it will be sent to the MMU upon line up (written into its 8bit register 0x0b)
|
|
|
-// However - in the G-code we can get a request to set the extra load distance at runtime to something else (M708 A0xb Xsomething).
|
|
|
-// The printer intercepts such a call and sets its extra load distance to match the new value as well.
|
|
|
-static constexpr uint8_t MMU2_TOOL_CHANGE_LOAD_LENGTH = 5; // mm
|
|
|
-
|
|
|
-static constexpr float MMU2_EXTRUDER_PTFE_LENGTH = 42.3f; // mm
|
|
|
-static constexpr float MMU2_EXTRUDER_HEATBREAK_LENGTH = 17.7f; // mm
|
|
|
-
|
|
|
-static constexpr float MMU2_LOAD_TO_NOZZLE_FEED_RATE = 20.0F; // mm/s
|
|
|
-static constexpr float MMU2_UNLOAD_TO_FINDA_FEED_RATE = 120.0F; // mm/s
|
|
|
-
|
|
|
-// The first the MMU does is initialise its axis. Meanwhile the E-motor will unload 20mm of filament in approx. 1 second.
|
|
|
-static constexpr float MMU2_RETRY_UNLOAD_TO_FINDA_LENGTH = 80.0f; // mm
|
|
|
-static constexpr float MMU2_RETRY_UNLOAD_TO_FINDA_FEED_RATE = 80.0f; // mm/s
|
|
|
-
|
|
|
-static constexpr uint8_t MMU2_NO_TOOL = 99;
|
|
|
-static constexpr uint32_t MMU_BAUD = 115200;
|
|
|
-
|
|
|
-struct E_Step {
|
|
|
- float extrude; ///< extrude distance in mm
|
|
|
- float feedRate; ///< feed rate in mm/s
|
|
|
-};
|
|
|
-
|
|
|
-static constexpr E_Step ramming_sequence[] PROGMEM = {
|
|
|
- { 0.2816F, 1339.0F / 60.F},
|
|
|
- { 0.3051F, 1451.0F / 60.F},
|
|
|
- { 0.3453F, 1642.0F / 60.F},
|
|
|
- { 0.3990F, 1897.0F / 60.F},
|
|
|
- { 0.4761F, 2264.0F / 60.F},
|
|
|
- { 0.5767F, 2742.0F / 60.F},
|
|
|
- { 0.5691F, 3220.0F / 60.F},
|
|
|
- { 0.1081F, 3220.0F / 60.F},
|
|
|
- { 0.7644F, 3635.0F / 60.F},
|
|
|
- { 0.8248F, 3921.0F / 60.F},
|
|
|
- { 0.8483F, 4033.0F / 60.F},
|
|
|
- { -15.0F, 6000.0F / 60.F},
|
|
|
- { -24.5F, 1200.0F / 60.F},
|
|
|
- { -7.0F, 600.0F / 60.F},
|
|
|
- { -3.5F, 360.0F / 60.F},
|
|
|
- { 20.0F, 454.0F / 60.F},
|
|
|
- { -20.0F, 303.0F / 60.F},
|
|
|
- { -35.0F, 2000.0F / 60.F},
|
|
|
-};
|
|
|
-
|
|
|
-static constexpr E_Step load_to_nozzle_sequence[] PROGMEM = {
|
|
|
- { 10.0F, 810.0F / 60.F}, // feed rate = 13.5mm/s - Load fast until filament reach end of nozzle
|
|
|
- { 25.0F, 198.0F / 60.F}, // feed rate = 3.3mm/s - Load slower once filament is out of the nozzle
|
|
|
-};
|
|
|
|
|
|
namespace MMU2 {
|
|
|
|
Alex Voinea