minTemp

more user-proof solution

Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h

@@ -1,6 +1,7 @@
 #ifndef CONFIGURATION_PRUSA_H
 #define CONFIGURATION_PRUSA_H
 
+#include <limits.h>
 /*------------------------------------
 GENERAL SETTINGS
 *------------------------------------*/
@@ -102,10 +103,18 @@ EXTRUDER SETTINGS
 *------------------------------------*/
 
 // Mintemps
-#define HEATER_0_MINTEMP 15
+#define HEATER_0_MINTEMP 30
 #define HEATER_1_MINTEMP 5
 #define HEATER_2_MINTEMP 5
-#define BED_MINTEMP 15
+#define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
+#define BED_MINTEMP 30
+#define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)

Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h

@@ -1,6 +1,7 @@
 #ifndef CONFIGURATION_PRUSA_H
 #define CONFIGURATION_PRUSA_H
 
+#include <limits.h>
 /*------------------------------------
 GENERAL SETTINGS
 *------------------------------------*/
@@ -102,10 +103,18 @@ EXTRUDER SETTINGS
 *------------------------------------*/
 
 // Mintemps
-#define HEATER_0_MINTEMP 15
+#define HEATER_0_MINTEMP 30
 #define HEATER_1_MINTEMP 5
 #define HEATER_2_MINTEMP 5
-#define BED_MINTEMP 15
+#define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
+#define BED_MINTEMP 30
+#define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -1,6 +1,7 @@
 #ifndef CONFIGURATION_PRUSA_H
 #define CONFIGURATION_PRUSA_H
 
+#include <limits.h>
 /*------------------------------------
  GENERAL SETTINGS
  *------------------------------------*/
@@ -157,8 +158,14 @@
 #define HEATER_1_MINTEMP 5
 #define HEATER_2_MINTEMP 5
 #define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
 #define BED_MINTEMP 30
 #define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -1,6 +1,7 @@
 #ifndef CONFIGURATION_PRUSA_H
 #define CONFIGURATION_PRUSA_H
 
+#include <limits.h>
 /*------------------------------------
  GENERAL SETTINGS
  *------------------------------------*/
@@ -158,8 +159,14 @@
 #define HEATER_1_MINTEMP 5
 #define HEATER_2_MINTEMP 5
 #define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
 #define BED_MINTEMP 30
 #define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -1,6 +1,7 @@
 #ifndef CONFIGURATION_PRUSA_H
 #define CONFIGURATION_PRUSA_H
 
+#include <limits.h>
 /*------------------------------------
  GENERAL SETTINGS
  *------------------------------------*/
@@ -277,8 +278,14 @@
 #define HEATER_1_MINTEMP 5
 #define HEATER_2_MINTEMP 5
 #define HEATER_MINTEMP_DELAY 15000                // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if HEATER_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see HEATER_MINTEMP_DELAY definition)"
+#endif
 #define BED_MINTEMP 15
 #define BED_MINTEMP_DELAY 50000                   // [ms] ! if changed, check maximal allowed value @ ShortTimer
+#if BED_MINTEMP_DELAY>USHRT_MAX
+#error "Check maximal allowed value @ ShortTimer (see BED_MINTEMP_DELAY definition)"
+#endif
 
 // Maxtemps
 #if defined(E3D_PT100_EXTRUDER_WITH_AMP) || defined(E3D_PT100_EXTRUDER_NO_AMP)