Italian bed correction messages corrected

Firmware/Marlin_main.cpp

@@ -1892,7 +1892,7 @@ void trace() {
     noTone(BEEPER);
     delay(20);
 }
-
+/*
 void ramming() {
 //	  float tmp[4] = DEFAULT_MAX_FEEDRATE;
 	if (current_temperature[0] < 230) {
@@ -1947,10 +1947,10 @@ void ramming() {
 		current_position[E_AXIS] += 4;
 		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 3000 / 60, active_extruder);
 		st_synchronize();
-		/*current_position[X_AXIS] += 23; //delay
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600/60, active_extruder); //delay
-		current_position[X_AXIS] -= 23; //delay
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600/60, active_extruder); //delay*/
+		//current_position[X_AXIS] += 23; //delay
+		//plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600/60, active_extruder); //delay
+		//current_position[X_AXIS] -= 23; //delay
+		//plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 600/60, active_extruder); //delay
 		delay(4700);
 		max_feedrate[E_AXIS] = 80;
 		current_position[E_AXIS] -= 92;
@@ -1975,7 +1975,7 @@ void ramming() {
 
 	}
   }
-
+*/
 void process_commands()
 {
   #ifdef FILAMENT_RUNOUT_SUPPORT

Firmware/language_all.cpp

@@ -123,7 +123,7 @@ const char * const MSG_BED_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_BED_CORRECTION_FRONT_EN[] PROGMEM = "Front side[um]";
 const char MSG_BED_CORRECTION_FRONT_CZ[] PROGMEM = "Vpredu [um]";
-const char MSG_BED_CORRECTION_FRONT_IT[] PROGMEM = "Lato ateriore";
+const char MSG_BED_CORRECTION_FRONT_IT[] PROGMEM = "Fronte    [um]";
 const char MSG_BED_CORRECTION_FRONT_ES[] PROGMEM = "Adelante  [um]";
 const char MSG_BED_CORRECTION_FRONT_PL[] PROGMEM = "Do przodu [um]";
 const char MSG_BED_CORRECTION_FRONT_DE[] PROGMEM = "Vorne     [um]";
@@ -138,7 +138,7 @@ const char * const MSG_BED_CORRECTION_FRONT_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_BED_CORRECTION_LEFT_EN[] PROGMEM = "Left side [um]";
 const char MSG_BED_CORRECTION_LEFT_CZ[] PROGMEM = "Vlevo  [um]";
-const char MSG_BED_CORRECTION_LEFT_IT[] PROGMEM = "Lato sinistro";
+const char MSG_BED_CORRECTION_LEFT_IT[] PROGMEM = "Sinistra  [um]";
 const char MSG_BED_CORRECTION_LEFT_ES[] PROGMEM = "Izquierda [um]";
 const char MSG_BED_CORRECTION_LEFT_PL[] PROGMEM = "W lewo  [um]";
 const char MSG_BED_CORRECTION_LEFT_DE[] PROGMEM = "Links     [um]";
@@ -168,7 +168,7 @@ const char * const MSG_BED_CORRECTION_MENU_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_BED_CORRECTION_REAR_EN[] PROGMEM = "Rear side [um]";
 const char MSG_BED_CORRECTION_REAR_CZ[] PROGMEM = "Vzadu  [um]";
-const char MSG_BED_CORRECTION_REAR_IT[] PROGMEM = "Lato posteriore";
+const char MSG_BED_CORRECTION_REAR_IT[] PROGMEM = "Retro     [um]";
 const char MSG_BED_CORRECTION_REAR_ES[] PROGMEM = "Atras     [um]";
 const char MSG_BED_CORRECTION_REAR_PL[] PROGMEM = "Do tylu  [um]";
 const char MSG_BED_CORRECTION_REAR_DE[] PROGMEM = "Hinten    [um]";
@@ -194,7 +194,7 @@ const char * const MSG_BED_CORRECTION_RESET_LANG_TABLE[LANG_NUM] PROGMEM = {
 
 const char MSG_BED_CORRECTION_RIGHT_EN[] PROGMEM = "Right side[um]";
 const char MSG_BED_CORRECTION_RIGHT_CZ[] PROGMEM = "Vpravo [um]";
-const char MSG_BED_CORRECTION_RIGHT_IT[] PROGMEM = "Lato destro";
+const char MSG_BED_CORRECTION_RIGHT_IT[] PROGMEM = "Destra    [um]";
 const char MSG_BED_CORRECTION_RIGHT_ES[] PROGMEM = "Derecha   [um]";
 const char MSG_BED_CORRECTION_RIGHT_PL[] PROGMEM = "W prawo [um]";
 const char MSG_BED_CORRECTION_RIGHT_DE[] PROGMEM = "Rechts    [um]";

Firmware/language_it.h

@@ -221,10 +221,10 @@
 #define MSG_BABYSTEP_Z_NOT_SET							"Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration."
 
 #define MSG_BED_CORRECTION_MENU							"Correz. liv.letto"
-#define MSG_BED_CORRECTION_LEFT							"Lato sinistro"
-#define MSG_BED_CORRECTION_RIGHT						"Lato destro"
-#define MSG_BED_CORRECTION_FRONT						"Lato ateriore"
-#define MSG_BED_CORRECTION_REAR							"Lato posteriore"
+#define MSG_BED_CORRECTION_LEFT							"Sinistra  [um]"
+#define MSG_BED_CORRECTION_RIGHT						"Destra    [um]"
+#define MSG_BED_CORRECTION_FRONT						"Fronte    [um]"
+#define MSG_BED_CORRECTION_REAR							"Retro     [um]"
 #define MSG_BED_CORRECTION_RESET						"Reset"			
 
 #define MSG_MESH_BED_LEVELING							"Mesh livel. letto"