Serial port ECHO bug fix - for clear eerpom farm_mode will be set to false. In farm_mode is second serial port the main port and data received from this port is send to serial port 0 (debuging feature).

Firmware/Dcodes.cpp

@@ -1,7 +1,7 @@
-#include "Dcodes.h"
-#include "Marlin.h"
-#include "cmdqueue.h"
-
+#include "Dcodes.h"
+#include "Marlin.h"
+#include "cmdqueue.h"
+
 inline void serial_print_hex_nibble(uint8_t val)
 {
 	MYSERIAL.write((val > 9)?(val - 10 + 'a'):(val + '0'));
@@ -42,8 +42,8 @@ int parse_hex(char* hex, uint8_t* data, int count)
 	return parsed;
 }
 
-void dcode_0()
-{
+void dcode_0()
+{
 	if (*(strchr_pointer + 1) == 0) return;
 	MYSERIAL.println("D0 - Reset");
 	if (code_seen('B')) //bootloader
@@ -57,19 +57,19 @@ void dcode_0()
 	WDTCSR = (1<<WDE) | (1<<WDP0); //30ms prescaler
 	while(1); //wait for reset
 */
-}
-
-void dcode_1()
-{
+}
+
+void dcode_1()
+{
 	MYSERIAL.println("D1 - Clear EEPROM");
 	cli();
 	for (int i = 0; i < 4096; i++)
 		eeprom_write_byte((unsigned char*)i, (unsigned char)0);
 	sei();
-}
-
-void dcode_2()
-{
+}
+
+void dcode_2()
+{
 	MYSERIAL.println("D2 - Read/Write RAM");
 	uint16_t address = 0x0000; //default 0x0000
 	uint16_t count = 0x2000; //default 0x2000 (entire ram)
@@ -111,9 +111,9 @@ void dcode_2()
 		}
 		MYSERIAL.write('\n');
 	}
-}
-void dcode_3()
-{
+}
+void dcode_3()
+{
 	MYSERIAL.println("D3 - Read/Write EEPROM");
 	uint16_t address = 0x0000; //default 0x0000
 	uint16_t count = 0x2000; //default 0x2000 (entire eeprom)
@@ -155,10 +155,10 @@ void dcode_3()
 		}
 		MYSERIAL.write('\n');
 	}
-}
-
-void dcode_4()
-{
+}
+
+void dcode_4()
+{
 	MYSERIAL.println("D4 - Read/Write PIN");
 	if (code_seen('P')) // Pin (0-255)
 	{

Firmware/MarlinSerial.cpp

@@ -23,7 +23,7 @@
 #include "Marlin.h"
 #include "MarlinSerial.h"
 
-int selectedSerialPort; 
+int selectedSerialPort = 0; 
 
 #ifndef AT90USB
 // this next line disables the entire HardwareSerial.cpp, 

Firmware/Marlin_main.cpp

@@ -57,7 +57,7 @@
 
 #include <avr/wdt.h>
 
-#include "Dcodes.h"
+#include "Dcodes.h"
 
 
 #ifdef SWSPI
@@ -759,16 +759,16 @@ void setup()
 	setup_killpin();
 	setup_powerhold();
 	farm_mode = eeprom_read_byte((uint8_t*)EEPROM_FARM_MODE); 
-	EEPROM_read_B(EEPROM_FARM_NUMBER, &farm_no); 
-	//if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == 0xFFFF)) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode  
-	if (farm_no == 0xFFFF) farm_no = 0; 
-	if (farm_mode) 
+	EEPROM_read_B(EEPROM_FARM_NUMBER, &farm_no);
+	if ((farm_mode == 0xFF && farm_no == 0) || (farm_no == 0xFFFF)) farm_mode = false; //if farm_mode has not been stored to eeprom yet and farm number is set to zero or EEPROM is fresh, deactivate farm mode
+	if (farm_no == 0xFFFF) farm_no = 0;
+	if (farm_mode)
 	{ 
-		prusa_statistics(8); 
-		selectedSerialPort = 1; 
+		prusa_statistics(8);
+		selectedSerialPort = 1;
 	}
 	else
-		selectedSerialPort = 0; 
+		selectedSerialPort = 0;
 	MYSERIAL.begin(BAUDRATE);
 	SERIAL_PROTOCOLLNPGM("start");
 	SERIAL_ECHO_START;
@@ -5582,6 +5582,13 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
 		dcode_3(); break;
 	case 4: // D4 - Read/Write PIN
 		dcode_4(); break;
+	case 5:
+		MYSERIAL.println("D5 - Test");
+		if (code_seen('P'))
+			selectedSerialPort = (int)code_value();
+		MYSERIAL.print("selectedSerialPort = ");
+		MYSERIAL.println(selectedSerialPort, DEC);
+		break;
 /*	case 4:
 		{
 			MYSERIAL.println("D4 - Test");
@@ -5619,14 +5626,14 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
 #endif            
 		break;*/
 //		break;
-	case 5:
+/*	case 5:
 		{
-/*			MYSERIAL.print("tmc2130_rd_MSCNT(0)=");
+			MYSERIAL.print("tmc2130_rd_MSCNT(0)=");
 			int val = tmc2130_rd_MSCNT(tmc2130_cs[0]);
-			MYSERIAL.println(val);*/
+			MYSERIAL.println(val);
 			homeaxis(0);
 		}
-		break;
+		break;*/
 	case 6:
 		{
 /*			MYSERIAL.print("tmc2130_rd_MSCNT(1)=");
@@ -6691,7 +6698,7 @@ void serialecho_temperatures() {
 
 
 void uvlo_() {
-		//SERIAL_ECHOLNPGM("UVLO");
+		SERIAL_ECHOLNPGM("UVLO");
 		save_print_to_eeprom();
 		float current_position_bckp[2];
 		int feedrate_bckp = feedrate;

Firmware/cmdqueue.cpp

@@ -356,7 +356,7 @@ void get_command()
 	if (selectedSerialPort == 1)
 	{
 		selectedSerialPort = 0; 
-		MYSERIAL.write(serial_char); 
+		MYSERIAL.write(serial_char); // for debuging serial line 2 in farm_mode
 		selectedSerialPort = 1; 
 	} 
       TimeSent = millis();