Support menu translated and fixes, snmm M600 long beep fix

Firmware/Marlin_main.cpp

@@ -5288,6 +5288,7 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
           }
 
         }
+		WRITE(BEEPER, LOW);
 #ifdef SNMM
 		display_loading();
 		do {
@@ -5300,14 +5301,9 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
 			target[E_AXIS] += 0.001;
 			plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 1000, active_extruder);
 		}*/
-#endif
-        //Filament inserted
-        
-        WRITE(BEEPER,LOW);
 
-		//Feed the filament to the end of nozzle quickly        
-#ifdef SNMM
-		
+        //Filament inserted     
+		//Feed the filament to the end of nozzle quickly   		
 		st_synchronize();
 		target[E_AXIS] += bowden_length[snmm_extruder];
 		plan_buffer_line(target[X_AXIS], target[Y_AXIS], target[Z_AXIS], target[E_AXIS], 3000, active_extruder);

Firmware/language_all.cpp

@@ -765,6 +765,20 @@ const char * const MSG_CURRENT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_CURRENT_DE
 };
 
+const char MSG_DATE_EN[] PROGMEM = "Date:";
+const char MSG_DATE_CZ[] PROGMEM = "Datum:";
+const char MSG_DATE_IT[] PROGMEM = "Data";
+const char MSG_DATE_PL[] PROGMEM = "Data:";
+const char MSG_DATE_DE[] PROGMEM = "Datum";
+const char * const MSG_DATE_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_DATE_EN,
+	MSG_DATE_CZ,
+	MSG_DATE_IT,
+	MSG_DATE_EN,
+	MSG_DATE_PL,
+	MSG_DATE_DE
+};
+
 const char MSG_DISABLE_STEPPERS_EN[] PROGMEM = "Disable steppers";
 const char MSG_DISABLE_STEPPERS_CZ[] PROGMEM = "Vypnout motory";
 const char MSG_DISABLE_STEPPERS_IT[] PROGMEM = "Disabilit motori";
@@ -1424,6 +1438,20 @@ const char * const MSG_LANGUAGE_SELECT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_LANGUAGE_SELECT_DE
 };
 
+const char MSG_LEFT_EN[] PROGMEM = "Left:";
+const char MSG_LEFT_CZ[] PROGMEM = "Levy:";
+const char MSG_LEFT_IT[] PROGMEM = "Sinistra:";
+const char MSG_LEFT_PL[] PROGMEM = "Lewy:";
+const char MSG_LEFT_DE[] PROGMEM = "Links:";
+const char * const MSG_LEFT_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_LEFT_EN,
+	MSG_LEFT_CZ,
+	MSG_LEFT_IT,
+	MSG_LEFT_EN,
+	MSG_LEFT_PL,
+	MSG_LEFT_DE
+};
+
 const char MSG_LOADING_COLOR_EN[] PROGMEM = "Loading color";
 const char MSG_LOADING_COLOR_CZ[] PROGMEM = "Cisteni barvy";
 const char MSG_LOADING_COLOR_IT[] PROGMEM = "Caricando colore";
@@ -1654,6 +1682,20 @@ const char * const MSG_MAX_LANG_TABLE[1] PROGMEM = {
 	MSG_MAX_EN
 };
 
+const char MSG_MEASURED_SKEW_EN[] PROGMEM = "Measured skew:";
+const char MSG_MEASURED_SKEW_CZ[] PROGMEM = "Merene zkoseni:";
+const char MSG_MEASURED_SKEW_IT[] PROGMEM = "Incl. misurata:";
+const char MSG_MEASURED_SKEW_PL[] PROGMEM = "Zmier. sciecie:";
+const char MSG_MEASURED_SKEW_DE[] PROGMEM = "Schraeglauf:";
+const char * const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_MEASURED_SKEW_EN,
+	MSG_MEASURED_SKEW_CZ,
+	MSG_MEASURED_SKEW_IT,
+	MSG_MEASURED_SKEW_EN,
+	MSG_MEASURED_SKEW_PL,
+	MSG_MEASURED_SKEW_DE
+};
+
 const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_EN[] PROGMEM = "Measuring reference height of calibration point";
 const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_CZ[] PROGMEM = "Merim referencni vysku kalibracniho bodu";
 const char MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_IT[] PROGMEM = "Misurare l'altezza di riferimento del punto di calibrazione";
@@ -2393,6 +2435,20 @@ const char * const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_RESUMING_PRINT_DE
 };
 
+const char MSG_RIGHT_EN[] PROGMEM = "Right:";
+const char MSG_RIGHT_CZ[] PROGMEM = "Pravy:";
+const char MSG_RIGHT_IT[] PROGMEM = "Destra:";
+const char MSG_RIGHT_PL[] PROGMEM = "Prawy:";
+const char MSG_RIGHT_DE[] PROGMEM = "Rechts:";
+const char * const MSG_RIGHT_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_RIGHT_EN,
+	MSG_RIGHT_CZ,
+	MSG_RIGHT_IT,
+	MSG_RIGHT_EN,
+	MSG_RIGHT_PL,
+	MSG_RIGHT_DE
+};
+
 const char MSG_SD_CANT_ENTER_SUBDIR_EN[] PROGMEM = "Cannot enter subdir: ";
 const char * const MSG_SD_CANT_ENTER_SUBDIR_LANG_TABLE[1] PROGMEM = {
 	MSG_SD_CANT_ENTER_SUBDIR_EN
@@ -2918,6 +2974,20 @@ const char * const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SET_TEMPERATURE_DE
 };
 
+const char MSG_SEVERE_SKEW_EN[] PROGMEM = "Severe skew:";
+const char MSG_SEVERE_SKEW_CZ[] PROGMEM = "Tezke zkoseni:";
+const char MSG_SEVERE_SKEW_IT[] PROGMEM = "Inc. rilevante:";
+const char MSG_SEVERE_SKEW_PL[] PROGMEM = "Ostre sciecie:";
+const char MSG_SEVERE_SKEW_DE[] PROGMEM = "Schwerer Schr.:";
+const char * const MSG_SEVERE_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_SEVERE_SKEW_EN,
+	MSG_SEVERE_SKEW_CZ,
+	MSG_SEVERE_SKEW_IT,
+	MSG_SEVERE_SKEW_EN,
+	MSG_SEVERE_SKEW_PL,
+	MSG_SEVERE_SKEW_DE
+};
+
 const char MSG_SHOW_END_STOPS_EN[] PROGMEM = "Show end stops";
 const char MSG_SHOW_END_STOPS_CZ[] PROGMEM = "Stav konc. spin.";
 const char MSG_SHOW_END_STOPS_IT[] PROGMEM = "Stato finecorsa";
@@ -2963,6 +3033,20 @@ const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SILENT_MODE_ON_DE
 };
 
+const char MSG_SLIGHT_SKEW_EN[] PROGMEM = "Slight skew:";
+const char MSG_SLIGHT_SKEW_CZ[] PROGMEM = "Lehke zkoseni:";
+const char MSG_SLIGHT_SKEW_IT[] PROGMEM = "Incl. leggera:";
+const char MSG_SLIGHT_SKEW_PL[] PROGMEM = "Lekkie sciecie:";
+const char MSG_SLIGHT_SKEW_DE[] PROGMEM = "Leichter Schr.:";
+const char * const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_SLIGHT_SKEW_EN,
+	MSG_SLIGHT_SKEW_CZ,
+	MSG_SLIGHT_SKEW_IT,
+	MSG_SLIGHT_SKEW_EN,
+	MSG_SLIGHT_SKEW_PL,
+	MSG_SLIGHT_SKEW_DE
+};
+
 const char MSG_SOFTWARE_RESET_EN[] PROGMEM = " Software Reset";
 const char * const MSG_SOFTWARE_RESET_LANG_TABLE[1] PROGMEM = {
 	MSG_SOFTWARE_RESET_EN
@@ -3772,6 +3856,20 @@ const char * const MSG_WIZARD_Z_CAL_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_WIZARD_Z_CAL_DE
 };
 
+const char MSG_XYZ_DETAILS_EN[] PROGMEM = "XYZ cal. details";
+const char MSG_XYZ_DETAILS_CZ[] PROGMEM = "Detaily XYZ kal.";
+const char MSG_XYZ_DETAILS_IT[] PROGMEM = "XYZ Cal. dettagli";
+const char MSG_XYZ_DETAILS_PL[] PROGMEM = "Szczegoly kal.XYZ";
+const char MSG_XYZ_DETAILS_DE[] PROGMEM = "XYZ Kal. Details";
+const char * const MSG_XYZ_DETAILS_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_XYZ_DETAILS_EN,
+	MSG_XYZ_DETAILS_CZ,
+	MSG_XYZ_DETAILS_IT,
+	MSG_XYZ_DETAILS_EN,
+	MSG_XYZ_DETAILS_PL,
+	MSG_XYZ_DETAILS_DE
+};
+
 const char MSG_X_MAX_EN[] PROGMEM = "x_max: ";
 const char * const MSG_X_MAX_LANG_TABLE[1] PROGMEM = {
 	MSG_X_MAX_EN
@@ -3797,6 +3895,20 @@ const char * const MSG_YES_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_YES_DE
 };
 
+const char MSG_Y_DISTANCE_FROM_MIN_EN[] PROGMEM = "Y distance from min:";
+const char MSG_Y_DISTANCE_FROM_MIN_CZ[] PROGMEM = "Y vzdalenost od min:";
+const char MSG_Y_DISTANCE_FROM_MIN_IT[] PROGMEM = "Distanza Y da min:";
+const char MSG_Y_DISTANCE_FROM_MIN_PL[] PROGMEM = "Odleglosc Y od min.:";
+const char MSG_Y_DISTANCE_FROM_MIN_DE[] PROGMEM = "Y Entfernung vom min";
+const char * const MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_Y_DISTANCE_FROM_MIN_EN,
+	MSG_Y_DISTANCE_FROM_MIN_CZ,
+	MSG_Y_DISTANCE_FROM_MIN_IT,
+	MSG_Y_DISTANCE_FROM_MIN_EN,
+	MSG_Y_DISTANCE_FROM_MIN_PL,
+	MSG_Y_DISTANCE_FROM_MIN_DE
+};
+
 const char MSG_Y_MAX_EN[] PROGMEM = "y_max: ";
 const char * const MSG_Y_MAX_LANG_TABLE[1] PROGMEM = {
 	MSG_Y_MAX_EN

Firmware/language_all.h

@@ -154,6 +154,8 @@ extern const char* const MSG_CRASH_DETECTED_LANG_TABLE[1];
 #define MSG_CRASH_DETECTED LANG_TABLE_SELECT_EXPLICIT(MSG_CRASH_DETECTED_LANG_TABLE, 0)
 extern const char* const MSG_CURRENT_LANG_TABLE[LANG_NUM];
 #define MSG_CURRENT LANG_TABLE_SELECT(MSG_CURRENT_LANG_TABLE)
+extern const char* const MSG_DATE_LANG_TABLE[LANG_NUM];
+#define MSG_DATE LANG_TABLE_SELECT(MSG_DATE_LANG_TABLE)
 extern const char* const MSG_DISABLE_STEPPERS_LANG_TABLE[LANG_NUM];
 #define MSG_DISABLE_STEPPERS LANG_TABLE_SELECT(MSG_DISABLE_STEPPERS_LANG_TABLE)
 extern const char* const MSG_DWELL_LANG_TABLE[LANG_NUM];
@@ -290,6 +292,8 @@ extern const char* const MSG_LANGUAGE_NAME_LANG_TABLE[LANG_NUM];
 extern const char* const MSG_LANGUAGE_SELECT_LANG_TABLE[LANG_NUM];
 #define MSG_LANGUAGE_SELECT LANG_TABLE_SELECT(MSG_LANGUAGE_SELECT_LANG_TABLE)
 #define MSG_LANGUAGE_SELECT_EXPLICIT(LANG) LANG_TABLE_SELECT_EXPLICIT(MSG_LANGUAGE_SELECT_LANG_TABLE, LANG)
+extern const char* const MSG_LEFT_LANG_TABLE[LANG_NUM];
+#define MSG_LEFT LANG_TABLE_SELECT(MSG_LEFT_LANG_TABLE)
 extern const char* const MSG_LOADING_COLOR_LANG_TABLE[LANG_NUM];
 #define MSG_LOADING_COLOR LANG_TABLE_SELECT(MSG_LOADING_COLOR_LANG_TABLE)
 extern const char* const MSG_LOADING_FILAMENT_LANG_TABLE[LANG_NUM];
@@ -334,6 +338,8 @@ extern const char* const MSG_MARK_FIL_LANG_TABLE[LANG_NUM];
 #define MSG_MARK_FIL LANG_TABLE_SELECT(MSG_MARK_FIL_LANG_TABLE)
 extern const char* const MSG_MAX_LANG_TABLE[1];
 #define MSG_MAX LANG_TABLE_SELECT_EXPLICIT(MSG_MAX_LANG_TABLE, 0)
+extern const char* const MSG_MEASURED_SKEW_LANG_TABLE[LANG_NUM];
+#define MSG_MEASURED_SKEW LANG_TABLE_SELECT(MSG_MEASURED_SKEW_LANG_TABLE)
 extern const char* const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE[LANG_NUM];
 #define MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 LANG_TABLE_SELECT(MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1_LANG_TABLE)
 extern const char* const MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2_LANG_TABLE[LANG_NUM];
@@ -466,6 +472,8 @@ extern const char* const MSG_RESUMING_LANG_TABLE[LANG_NUM];
 #define MSG_RESUMING LANG_TABLE_SELECT(MSG_RESUMING_LANG_TABLE)
 extern const char* const MSG_RESUMING_PRINT_LANG_TABLE[LANG_NUM];
 #define MSG_RESUMING_PRINT LANG_TABLE_SELECT(MSG_RESUMING_PRINT_LANG_TABLE)
+extern const char* const MSG_RIGHT_LANG_TABLE[LANG_NUM];
+#define MSG_RIGHT LANG_TABLE_SELECT(MSG_RIGHT_LANG_TABLE)
 extern const char* const MSG_SD_CANT_ENTER_SUBDIR_LANG_TABLE[1];
 #define MSG_SD_CANT_ENTER_SUBDIR LANG_TABLE_SELECT_EXPLICIT(MSG_SD_CANT_ENTER_SUBDIR_LANG_TABLE, 0)
 extern const char* const MSG_SD_CANT_OPEN_SUBDIR_LANG_TABLE[1];
@@ -566,12 +574,16 @@ extern const char* const MSG_SET_ORIGIN_LANG_TABLE[1];
 #define MSG_SET_ORIGIN LANG_TABLE_SELECT_EXPLICIT(MSG_SET_ORIGIN_LANG_TABLE, 0)
 extern const char* const MSG_SET_TEMPERATURE_LANG_TABLE[LANG_NUM];
 #define MSG_SET_TEMPERATURE LANG_TABLE_SELECT(MSG_SET_TEMPERATURE_LANG_TABLE)
+extern const char* const MSG_SEVERE_SKEW_LANG_TABLE[LANG_NUM];
+#define MSG_SEVERE_SKEW LANG_TABLE_SELECT(MSG_SEVERE_SKEW_LANG_TABLE)
 extern const char* const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM];
 #define MSG_SHOW_END_STOPS LANG_TABLE_SELECT(MSG_SHOW_END_STOPS_LANG_TABLE)
 extern const char* const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM];
 #define MSG_SILENT_MODE_OFF LANG_TABLE_SELECT(MSG_SILENT_MODE_OFF_LANG_TABLE)
 extern const char* const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM];
 #define MSG_SILENT_MODE_ON LANG_TABLE_SELECT(MSG_SILENT_MODE_ON_LANG_TABLE)
+extern const char* const MSG_SLIGHT_SKEW_LANG_TABLE[LANG_NUM];
+#define MSG_SLIGHT_SKEW LANG_TABLE_SELECT(MSG_SLIGHT_SKEW_LANG_TABLE)
 extern const char* const MSG_SOFTWARE_RESET_LANG_TABLE[1];
 #define MSG_SOFTWARE_RESET LANG_TABLE_SELECT_EXPLICIT(MSG_SOFTWARE_RESET_LANG_TABLE, 0)
 extern const char* const MSG_SPEED_LANG_TABLE[LANG_NUM];
@@ -698,12 +710,16 @@ extern const char* const MSG_WIZARD_XYZ_CAL_LANG_TABLE[LANG_NUM];
 #define MSG_WIZARD_XYZ_CAL LANG_TABLE_SELECT(MSG_WIZARD_XYZ_CAL_LANG_TABLE)
 extern const char* const MSG_WIZARD_Z_CAL_LANG_TABLE[LANG_NUM];
 #define MSG_WIZARD_Z_CAL LANG_TABLE_SELECT(MSG_WIZARD_Z_CAL_LANG_TABLE)
+extern const char* const MSG_XYZ_DETAILS_LANG_TABLE[LANG_NUM];
+#define MSG_XYZ_DETAILS LANG_TABLE_SELECT(MSG_XYZ_DETAILS_LANG_TABLE)
 extern const char* const MSG_X_MAX_LANG_TABLE[1];
 #define MSG_X_MAX LANG_TABLE_SELECT_EXPLICIT(MSG_X_MAX_LANG_TABLE, 0)
 extern const char* const MSG_X_MIN_LANG_TABLE[1];
 #define MSG_X_MIN LANG_TABLE_SELECT_EXPLICIT(MSG_X_MIN_LANG_TABLE, 0)
 extern const char* const MSG_YES_LANG_TABLE[LANG_NUM];
 #define MSG_YES LANG_TABLE_SELECT(MSG_YES_LANG_TABLE)
+extern const char* const MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE[LANG_NUM];
+#define MSG_Y_DISTANCE_FROM_MIN LANG_TABLE_SELECT(MSG_Y_DISTANCE_FROM_MIN_LANG_TABLE)
 extern const char* const MSG_Y_MAX_LANG_TABLE[1];
 #define MSG_Y_MAX LANG_TABLE_SELECT_EXPLICIT(MSG_Y_MAX_LANG_TABLE, 0)
 extern const char* const MSG_Y_MIN_LANG_TABLE[1];

Firmware/language_cz.h

@@ -325,4 +325,13 @@
 #define MSG_PLA_FILAMENT_LOADED				"Je PLA filament zaveden?"
 #define MSG_PLEASE_LOAD_PLA					"Nejdrive zavedte PLA filament prosim."
 #define MSG_WIZARD_HEATING					"Predehrivam trysku. Prosim cekejte."
-#define MSG_M117_V2_CALIBRATION				"M117 Kal. prvni vrstvy"
+#define MSG_M117_V2_CALIBRATION				"M117 Kal. prvni vrstvy"
+
+#define MSG_DATE							"Datum:"
+#define MSG_XYZ_DETAILS						"Detaily XYZ kal."
+#define	MSG_Y_DISTANCE_FROM_MIN				"Y vzdalenost od min:"
+#define	MSG_LEFT							"Levy:"
+#define MSG_RIGHT							"Pravy:"
+#define MSG_MEASURED_SKEW					"Merene zkoseni:"
+#define MSG_SLIGHT_SKEW						"Lehke zkoseni:"
+#define MSG_SEVERE_SKEW						"Tezke zkoseni:"

Firmware/language_de.h

@@ -338,4 +338,13 @@
 #define MSG_PLA_FILAMENT_LOADED				"Ist PLA Filament geladen?"
 #define MSG_PLEASE_LOAD_PLA					"Bitte laden Sie zuerst PLA Filament."
 #define MSG_WIZARD_HEATING					"Vorheizen der Duese. Bitte warten."
-#define MSG_M117_V2_CALIBRATION				"M117 Erste-Schicht Kal."
+#define MSG_M117_V2_CALIBRATION				"M117 Erste-Schicht Kal."
+
+#define MSG_DATE							"Datum"
+#define MSG_XYZ_DETAILS						"XYZ Kal. Details"
+#define	MSG_Y_DISTANCE_FROM_MIN				"Y Entfernung vom min"
+#define	MSG_LEFT							"Links:"
+#define MSG_RIGHT							"Rechts:"
+#define MSG_MEASURED_SKEW					"Schraeglauf:"
+#define MSG_SLIGHT_SKEW						"Leichter Schr.:"
+#define MSG_SEVERE_SKEW						"Schwerer Schr.:"

Firmware/language_en.h

@@ -340,6 +340,16 @@
 #define(lenght=20, lines=2) MSG_PLA_FILAMENT_LOADED				"Is PLA filament loaded?"
 #define(lenght=20, lines=4) MSG_PLEASE_LOAD_PLA					"Please load PLA filament first."
 #define(length=25, lines=1) MSG_M117_V2_CALIBRATION				"M117 First layer cal."
+
+#define(length=17, lines=1) MSG_DATE							"Date:"
+#define(length=19, lines=1) MSG_XYZ_DETAILS						"XYZ cal. details"
+#define(length=20, lines=1)	MSG_Y_DISTANCE_FROM_MIN				"Y distance from min:"
+#define(length=12, lines=1)	MSG_LEFT							"Left:"
+#define(length=12, lines=1) MSG_RIGHT							"Right:"
+#define(length=15, lines=1) MSG_MEASURED_SKEW					"Measured skew:"
+#define(length=15, lines=1) MSG_SLIGHT_SKEW						"Slight skew:"
+#define(length=15, lines=1) MSG_SEVERE_SKEW						"Severe skew:"
+
 //messages bellow has no translation yet
 
 #define MSG_CRASHDETECT_OFF										"Crash det.  [off]"

Firmware/language_it.h

@@ -310,4 +310,13 @@
 #define MSG_PLA_FILAMENT_LOADED				"Il PLA e stato caricato?"
 #define MSG_PLEASE_LOAD_PLA					"Per favore prima caricare filamento di PLA."
 #define MSG_WIZARD_HEATING					"Sto preriscaldando l'ugello. Per favore attendi."
-#define MSG_M117_V2_CALIBRATION				"M117 Cal. primo layer."
+#define MSG_M117_V2_CALIBRATION				"M117 Cal. primo layer."
+
+#define MSG_DATE							"Data"
+#define MSG_XYZ_DETAILS						"XYZ Cal. dettagli"
+#define	MSG_Y_DISTANCE_FROM_MIN				"Distanza Y da min:"
+#define	MSG_LEFT							"Sinistra:"
+#define MSG_RIGHT							"Destra:"
+#define MSG_MEASURED_SKEW					"Incl. misurata:"
+#define MSG_SLIGHT_SKEW						"Incl. leggera:"
+#define MSG_SEVERE_SKEW						"Inc. rilevante:"

Firmware/language_pl.h

@@ -322,4 +322,13 @@
 #define MSG_PLA_FILAMENT_LOADED				"Fialment PLA jest zaladowany?"
 #define MSG_PLEASE_LOAD_PLA					"Prosze, najpierw zaladuj filament PLA."
 #define MSG_WIZARD_HEATING					"Nagrzewanie dyszy. Prosze czekac."
-#define MSG_M117_V2_CALIBRATION				"M117 Kal. 1. warstwy"
+#define MSG_M117_V2_CALIBRATION				"M117 Kal. 1. warstwy"
+
+#define MSG_DATE							"Data:"
+#define MSG_XYZ_DETAILS						"Szczegoly kal.XYZ"
+#define	MSG_Y_DISTANCE_FROM_MIN				"Odleglosc Y od min.:"
+#define	MSG_LEFT							"Lewy:"
+#define MSG_RIGHT							"Prawy:"
+#define MSG_MEASURED_SKEW					"Zmier. sciecie:"
+#define MSG_SLIGHT_SKEW						"Lekkie sciecie:"
+#define MSG_SEVERE_SKEW						"Ostre sciecie:"

Firmware/ultralcd.cpp

@@ -1611,7 +1611,7 @@ static void lcd_support_menu()
   MENU_ITEM(back, PSTR(ELECTRONICS),lcd_main_menu);
   MENU_ITEM(back, PSTR(NOZZLE_TYPE),lcd_main_menu);
   MENU_ITEM(back, PSTR("------------"), lcd_main_menu);
-  MENU_ITEM(back, PSTR("Date: "), lcd_main_menu);
+  MENU_ITEM(back, MSG_DATE, lcd_main_menu);
   MENU_ITEM(back, PSTR(__DATE__), lcd_main_menu);
 
   // Show the FlashAir IP address, if the card is available.
@@ -1622,10 +1622,7 @@ static void lcd_support_menu()
   }
   #ifndef MK1BP
   MENU_ITEM(back, PSTR("------------"), lcd_main_menu);
-    if (!IS_SD_PRINTING)
-    {
-  MENU_ITEM(function, PSTR("XYZ cal. details"), lcd_service_mode_show_result);
-    }
+  if (!IS_SD_PRINTING && !is_usb_printing) MENU_ITEM(function, MSG_XYZ_DETAILS, lcd_service_mode_show_result);
   MENU_ITEM(submenu, MSG_INFO_EXTRUDER, lcd_menu_extruder_info);
     
     
@@ -2058,15 +2055,16 @@ void lcd_service_mode_show_result() {
 	angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW));
 	lcd_update_enable(false);
 	lcd_implementation_clear();
-	lcd_printPGM(PSTR("Y distance from min:"));
-	lcd_print_at_PGM(0, 1, PSTR("Left:"));
-	lcd_print_at_PGM(0, 3, PSTR("Right:"));
+	lcd_printPGM(MSG_Y_DISTANCE_FROM_MIN);
+	lcd_print_at_PGM(0, 1, MSG_LEFT);
+	lcd_print_at_PGM(0, 2, MSG_RIGHT);
+
 	for (int i = 0; i < 2; i++) {
 		if(distance_from_min[i] < 200) {
-			lcd_print_at_PGM(8, i + 1, PSTR(""));
+			lcd_print_at_PGM(11, i + 1, PSTR(""));
 			lcd.print(distance_from_min[i]);
-			lcd_print_at_PGM((distance_from_min[i] < 0) ? 14 : 13, i + 1, PSTR("mm"));
-		} else lcd_print_at_PGM(8, i + 1, PSTR("N/A"));
+			lcd_print_at_PGM((distance_from_min[i] < 0) ? 17 : 16, i + 1, PSTR("mm"));		
+		} else lcd_print_at_PGM(11, i + 1, PSTR("N/A"));
 	}
 	delay_keep_alive(500);
 	while (!lcd_clicked()) {
@@ -2076,7 +2074,7 @@ void lcd_service_mode_show_result() {
 	lcd_implementation_clear();
 	
 
-	lcd_printPGM(PSTR("Measured skew: "));
+	lcd_printPGM(MSG_MEASURED_SKEW);
 	if (angleDiff < 100) {
 		lcd.print(angleDiff * 180 / M_PI);
 		lcd.print(LCD_STR_DEGREE);