unload changes reverted back

Firmware/Marlin_main.cpp

@@ -6072,7 +6072,7 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
 
 //		extr_unload2();
 
-		/*current_position[E_AXIS] -= 45;
+		current_position[E_AXIS] -= 45;
 		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 5200 / 60, active_extruder);
         st_synchronize();
         current_position[E_AXIS] -= 15;
@@ -6080,36 +6080,7 @@ case 404:  //M404 Enter the nominal filament width (3mm, 1.75mm ) N<3.0> or disp
         st_synchronize();
         current_position[E_AXIS] -= 20;
         plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 5000 / 60, active_extruder);
-		st_synchronize();*/
-
-		/*current_position[E_AXIS] -= 62;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 5000 / 60, active_extruder);
-		current_position[E_AXIS] -= 15;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 160 / 60, active_extruder);
-		*/
-		current_position[E_AXIS] -= 35;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 5000 / 60, active_extruder);
-		current_position[E_AXIS] -= 10;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 300 / 60, active_extruder);
-		current_position[E_AXIS] += 20;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200 / 60, active_extruder);
-		current_position[E_AXIS] -= 20;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200 / 60, active_extruder);
-		current_position[E_AXIS] += 20;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200 / 60, active_extruder);
-		current_position[E_AXIS] -= 20;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200 / 60, active_extruder);
-		current_position[E_AXIS] += 20;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200 / 60, active_extruder);
-		current_position[E_AXIS] -= 60;
-		plan_buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], 200 / 60, active_extruder);
-
-		st_synchronize();
-		disable_e0();
-		disable_e1();
-		disable_e2();
-
-
+		st_synchronize();		
 		lcd_setstatuspgm(WELCOME_MSG);
 		custom_message = false;
 		custom_message_type = 0;