lang - dictionaries updated and fixed

lang/lang_en.txt

@@ -118,6 +118,9 @@
 #MSG_MENU_CALIBRATION c=0 r=0
 "Calibration"
 
+#
+"Cancel"
+
 #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
 "Cannot enter subdir: "
 
@@ -133,6 +136,9 @@
 #MSG_COOLDOWN c=0 r=0
 "Cooldown"
 
+#
+"Copy selected language from XFLASH?"
+
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
 
@@ -184,6 +190,9 @@
 #MSG_EJECT_FILAMENT5 c=17 r=1
 "Eject filament 5"
 
+#
+"Eject"
+
 #MSG_EJECTING_FILAMENT c=20 r=1
 "Ejecting filament"
 
@@ -214,6 +223,21 @@
 #MSG_ERROR c=0 r=0
 "ERROR:"
 
+#
+"External SPI flash W25X20CL not responding."
+
+#
+"Extruder 1"
+
+#
+"Extruder 2"
+
+#
+"Extruder 3"
+
+#
+"Extruder 4"
+
 #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
 "Extruder fan:"
 
@@ -319,6 +343,9 @@
 #MSG_PRUSA3D_HOWTO c=0 r=0
 "howto.prusa3d.com"
 
+#
+"Change extruder"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 
@@ -388,6 +415,9 @@
 #MSG_FILAMENT_LOADING_T3 c=20 r=4
 "Insert filament into extruder 4. Click when done."
 
+#
+"Is filament 1 loaded?"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 
@@ -412,6 +442,9 @@
 #MSG_SELFTEST_EXTRUDER_FAN c=20 r=0
 "Left hotend fan?"
 
+#
+"Left"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 
@@ -472,6 +505,9 @@
 #MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
 "MMU OK. Resuming temperature..."
 
+#
+"Measured skew"
+
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 
@@ -520,6 +556,9 @@
 #MSG_SELFTEST_NOTCONNECTED c=0 r=0
 "Not connected"
 
+#
+"New firmware version available:"
+
 #MSG_SELFTEST_FAN_NO c=19 r=0
 "Not spinning"
 
@@ -595,6 +634,9 @@
 #MSG_PRESS_TO_UNLOAD c=20 r=4
 "Please press the knob to unload filament"
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+
 #MSG_PULL_OUT_FILAMENT c=20 r=4
 "Please pull out filament immediately"
 
@@ -625,6 +667,9 @@
 #MSG_WIZARD_HEATING c=20 r=3
 "Preheating nozzle. Please wait."
 
+#
+"Please upgrade."
+
 #MSG_PRESS_TO_PREHEAT c=20 r=4
 "Press knob to preheat nozzle and continue."
 
@@ -685,6 +730,9 @@
 #MSG_SECOND_SERIAL_ON c=17 r=1
 "RPi port     [on]"
 
+#
+"Resend"
+
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
 
@@ -700,6 +748,9 @@
 #MSG_SD_CARD_OK c=0 r=0
 "SD card ok"
 
+#
+"Right"
+
 #MSG_SD_INIT_FAIL c=0 r=0
 "SD init fail"
 
@@ -727,6 +778,12 @@
 #MSG_FORCE_SELFTEST c=20 r=8
 "Selftest will be run to calibrate accurate sensorless rehoming."
 
+#
+"Select nozzle preheat temperature which matches your material."
+
+#
+"Select PLA filament:"
+
 #MSG_SET_TEMPERATURE c=19 r=1
 "Set temperature:"
 
@@ -751,6 +808,9 @@
 #MSG_SORT_TIME c=17 r=1
 "Sort:      [time]"
 
+#
+"Severe skew"
+
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
 
@@ -760,6 +820,9 @@
 #MSG_SOUND_LOUD c=17 r=1
 "Sound      [loud]"
 
+#
+"Slight skew"
+
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
 
@@ -832,6 +895,12 @@
 #MSG_TUNE c=0 r=0
 "Tune"
 
+#
+"Unload"
+
+#
+"Unload all"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 
@@ -874,9 +943,6 @@
 #MSG_WIZARD c=17 r=1
 "Wizard"
 
-#MSG_SD_WORKDIR_FAIL c=0 r=0
-"workDir open failed"
-
 #MSG_XYZ_DETAILS c=19 r=1
 "XYZ cal. details"
 

lang/lang_en_cz.txt

@@ -158,6 +158,10 @@
 "Calibration"
 "Kalibrace"
 
+#
+"Cancel"
+"\x00"
+
 #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
 "Cannot enter subdir: "
 "\x00"
@@ -178,6 +182,10 @@
 "Cooldown"
 "Zchladit"
 
+#
+"Copy selected language from XFLASH?"
+"\x00"
+
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
 "Crash det.  [zap]"
@@ -246,6 +254,10 @@
 "Eject filament 5"
 "Vysunout filament 5"
 
+#
+"Eject"
+"\x00"
+
 #MSG_EJECTING_FILAMENT c=20 r=1
 "Ejecting filament"
 "Vysouvam filament"
@@ -286,6 +298,26 @@
 "ERROR:"
 "CHYBA:"
 
+#
+"External SPI flash W25X20CL not responding."
+"\x00"
+
+#
+"Extruder 1"
+"\x00"
+
+#
+"Extruder 2"
+"\x00"
+
+#
+"Extruder 3"
+"\x00"
+
+#
+"Extruder 4"
+"\x00"
+
 #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
 "Extruder fan:"
 "Levy vent.:"
@@ -426,6 +458,10 @@
 "howto.prusa3d.com"
 "\x00"
 
+#
+"Change extruder"
+"\x00"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 "Vymenit filament"
@@ -518,6 +554,10 @@
 "Insert filament into extruder 4. Click when done."
 "Vlozte filament do extruderu 4. Potvrdte tlacitkem."
 
+#
+"Is filament 1 loaded?"
+"\x00"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 "Vlozte filament"
@@ -550,6 +590,10 @@
 "Left hotend fan?"
 "Levy vent na trysce?"
 
+#
+"Left"
+"\x00"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 "Vlevo [um]"
@@ -630,6 +674,10 @@
 "MMU OK. Resuming temperature..."
 "MMU OK. Pokracuji v nahrivani..."
 
+#
+"Measured skew"
+"\x00"
+
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 "MMU OK. Pokracuji..."
@@ -694,6 +742,10 @@
 "Not connected"
 "Nezapojeno "
 
+#
+"New firmware version available:"
+"\x00"
+
 #MSG_SELFTEST_FAN_NO c=19 r=0
 "Not spinning"
 "Netoci se"
@@ -794,6 +846,10 @@
 "Please press the knob to unload filament"
 "Pro vysunuti filamentu stisknete prosim tlacitko"
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+"\x00"
+
 #MSG_PULL_OUT_FILAMENT c=20 r=4
 "Please pull out filament immediately"
 "Prosim vyjmete urychlene filament"
@@ -834,6 +890,10 @@
 "Preheating nozzle. Please wait."
 "Predehrivam trysku. Prosim cekejte."
 
+#
+"Please upgrade."
+"\x00"
+
 #MSG_PRESS_TO_PREHEAT c=20 r=4
 "Press knob to preheat nozzle and continue."
 "Pro nahrati trysky a pokracovani stisknete tlacitko."
@@ -914,6 +974,10 @@
 "RPi port     [on]"
 "RPi port    [zap]"
 
+#
+"Resend"
+"\x00"
+
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
 "RPi port    [vyp]"
@@ -934,6 +998,10 @@
 "SD card ok"
 "\x00"
 
+#
+"Right"
+"\x00"
+
 #MSG_SD_INIT_FAIL c=0 r=0
 "SD init fail"
 "\x00"
@@ -970,6 +1038,14 @@
 "Selftest will be run to calibrate accurate sensorless rehoming."
 "Pro kalibraci presneho rehomovani bude nyni spusten selftest."
 
+#
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#
+"Select PLA filament:"
+"\x00"
+
 #MSG_SET_TEMPERATURE c=19 r=1
 "Set temperature:"
 "Nastavte teplotu:"
@@ -1002,6 +1078,10 @@
 "Sort:      [time]"
 "Trideni     [Cas]"
 
+#
+"Severe skew"
+"\x00"
+
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
 "Trideni [Abeceda]"
@@ -1014,6 +1094,10 @@
 "Sound      [loud]"
 "Zvuk    [hlasity]"
 
+#
+"Slight skew"
+"\x00"
+
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
 "Zvuk    [vypnuto]"
@@ -1110,6 +1194,14 @@
 "Tune"
 "Ladit"
 
+#
+"Unload"
+"\x00"
+
+#
+"Unload all"
+"\x00"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 "Vyjmout filament"

lang/lang_en_de.txt

@@ -158,6 +158,10 @@
 "Calibration"
 "Kalibrierung"
 
+#
+"Cancel"
+"\x00"
+
 #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
 "Cannot enter subdir: "
 "Kann Unterverzeichnis nicht oeffnen: "
@@ -178,6 +182,10 @@
 "Cooldown"
 "Abkuehlen"
 
+#
+"Copy selected language from XFLASH?"
+"\x00"
+
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
 "Crash Erk.   [an]"
@@ -246,6 +254,10 @@
 "Eject filament 5"
 "Filamentauswurf 5"
 
+#
+"Eject"
+"\x00"
+
 #MSG_EJECTING_FILAMENT c=20 r=1
 "Ejecting filament"
 "Werfe Filament aus"
@@ -286,6 +298,26 @@
 "ERROR:"
 "FEHLER:"
 
+#
+"External SPI flash W25X20CL not responding."
+"\x00"
+
+#
+"Extruder 1"
+"\x00"
+
+#
+"Extruder 2"
+"\x00"
+
+#
+"Extruder 3"
+"\x00"
+
+#
+"Extruder 4"
+"\x00"
+
 #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
 "Extruder fan:"
 "Extruder Luefter:"
@@ -426,6 +458,10 @@
 "howto.prusa3d.com"
 "\x00"
 
+#
+"Change extruder"
+"\x00"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 "Filament-Wechsel"
@@ -518,6 +554,10 @@
 "Insert filament into extruder 4. Click when done."
 "Filament in Extruder 4 einlegen. Klicken wenn fertig."
 
+#
+"Is filament 1 loaded?"
+"\x00"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 "Filament einlegen"
@@ -550,6 +590,10 @@
 "Left hotend fan?"
 "Linker Luefter?"
 
+#
+"Left"
+"\x00"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 "Links [um]"
@@ -630,6 +674,10 @@
 "MMU OK. Resuming temperature..."
 "MMU OK. Temperatur wiederherstellen..."
 
+#
+"Measured skew"
+"\x00"
+
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 "MMU OK.  Weiterdrucken..."
@@ -694,6 +742,10 @@
 "Not connected"
 "Nicht angeschlossen"
 
+#
+"New firmware version available:"
+"\x00"
+
 #MSG_SELFTEST_FAN_NO c=19 r=0
 "Not spinning"
 "Dreht sich nicht"
@@ -794,6 +846,10 @@
 "Please press the knob to unload filament"
 "Bitte druecken Sie den Knopf um das  Filament zu entladen."
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+"\x00"
+
 #MSG_PULL_OUT_FILAMENT c=20 r=4
 "Please pull out filament immediately"
 "Bitte ziehen Sie das Filament sofort heraus"
@@ -834,6 +890,10 @@
 "Preheating nozzle. Please wait."
 "Vorheizen der Duese. Bitte warten."
 
+#
+"Please upgrade."
+"\x00"
+
 #MSG_PRESS_TO_PREHEAT c=20 r=4
 "Press knob to preheat nozzle and continue."
 "Bitte druecken Sie den Knopf um die  Duese vorzuheizen und fortzufahren."
@@ -914,6 +974,10 @@
 "RPi port     [on]"
 "RPi Port     [an]"
 
+#
+"Resend"
+"\x00"
+
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
 "RPi Port    [aus]"
@@ -934,6 +998,10 @@
 "SD card ok"
 "SD Karte ok"
 
+#
+"Right"
+"\x00"
+
 #MSG_SD_INIT_FAIL c=0 r=0
 "SD init fail"
 "SD Init fehlerhaft"
@@ -970,6 +1038,14 @@
 "Selftest will be run to calibrate accurate sensorless rehoming."
 "Selbsttest im Gang, um die genaue Rueck- kehr zum Nullpunkt ohne Sensor zu kalibrieren"
 
+#
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#
+"Select PLA filament:"
+"\x00"
+
 #MSG_SET_TEMPERATURE c=19 r=1
 "Set temperature:"
 "Temp. einstellen:"
@@ -1002,6 +1078,10 @@
 "Sort:      [time]"
 "Sort.:     [Zeit]"
 
+#
+"Severe skew"
+"\x00"
+
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
 "Sort.: [Alphabet]"
@@ -1014,6 +1094,10 @@
 "Sound      [loud]"
 "Sound      [laut]"
 
+#
+"Slight skew"
+"\x00"
+
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
 "Sound     [stumm]"
@@ -1110,6 +1194,14 @@
 "Tune"
 "Feineinstellung"
 
+#
+"Unload"
+"\x00"
+
+#
+"Unload all"
+"\x00"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 "Filament entladen"

lang/lang_en_es.txt

@@ -158,6 +158,10 @@
 "Calibration"
 "Calibracion"
 
+#
+"Cancel"
+"\x00"
+
 #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
 "Cannot enter subdir: "
 "Sin acceso subdir: "
@@ -178,6 +182,10 @@
 "Cooldown"
 "Enfriar"
 
+#
+"Copy selected language from XFLASH?"
+"\x00"
+
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
 "Det. choque [act]"
@@ -246,6 +254,10 @@
 "Eject filament 5"
 "Expulsar filam. 5"
 
+#
+"Eject"
+"\x00"
+
 #MSG_EJECTING_FILAMENT c=20 r=1
 "Ejecting filament"
 "Expulsando filamento"
@@ -286,6 +298,26 @@
 "ERROR:"
 "\x00"
 
+#
+"External SPI flash W25X20CL not responding."
+"\x00"
+
+#
+"Extruder 1"
+"\x00"
+
+#
+"Extruder 2"
+"\x00"
+
+#
+"Extruder 3"
+"\x00"
+
+#
+"Extruder 4"
+"\x00"
+
 #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
 "Extruder fan:"
 "Ventilador del extrusor:"
@@ -426,6 +458,10 @@
 "howto.prusa3d.com"
 "\x00"
 
+#
+"Change extruder"
+"\x00"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 "Cambiar filamento"
@@ -518,6 +554,10 @@
 "Insert filament into extruder 4. Click when done."
 "Insertar filamento en el extrusor 4. Haz clic una vez terminado."
 
+#
+"Is filament 1 loaded?"
+"\x00"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 "Introducir filamento"
@@ -550,6 +590,10 @@
 "Left hotend fan?"
 "Vent. izquierdo?"
 
+#
+"Left"
+"\x00"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 "Izquierda [um]"
@@ -630,6 +674,10 @@
 "MMU OK. Resuming temperature..."
 "MMU OK. Restaurando temperatura..."
 
+#
+"Measured skew"
+"\x00"
+
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 "MMU OK. Resumiendo..."
@@ -694,6 +742,10 @@
 "Not connected"
 "No hay conexion"
 
+#
+"New firmware version available:"
+"\x00"
+
 #MSG_SELFTEST_FAN_NO c=19 r=0
 "Not spinning"
 "Ventilador no gira"
@@ -794,6 +846,10 @@
 "Please press the knob to unload filament"
 "Por favor, pulsa el dial para descargar el filamento"
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+"\x00"
+
 #MSG_PULL_OUT_FILAMENT c=20 r=4
 "Please pull out filament immediately"
 "Por favor retire el filamento de inmediato"
@@ -834,6 +890,10 @@
 "Preheating nozzle. Please wait."
 "Precalentando nozzle. Espera por favor."
 
+#
+"Please upgrade."
+"\x00"
+
 #MSG_PRESS_TO_PREHEAT c=20 r=4
 "Press knob to preheat nozzle and continue."
 "Pulsa el dial para precalentar la boquilla y continue."
@@ -914,6 +974,10 @@
 "RPi port     [on]"
 "Puerto RPi  [act]"
 
+#
+"Resend"
+"\x00"
+
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
 "Puerto RPi  [ina]"
@@ -934,6 +998,10 @@
 "SD card ok"
 "Tarj. SD ok"
 
+#
+"Right"
+"\x00"
+
 #MSG_SD_INIT_FAIL c=0 r=0
 "SD init fail"
 "Error init SD"
@@ -970,6 +1038,14 @@
 "Selftest will be run to calibrate accurate sensorless rehoming."
 "Se realizara el auto-test para calibrar con precision la vuelta a la posicion inicial sin sensores."
 
+#
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#
+"Select PLA filament:"
+"\x00"
+
 #MSG_SET_TEMPERATURE c=19 r=1
 "Set temperature:"
 "Establecer temp.:"
@@ -1002,6 +1078,10 @@
 "Sort:      [time]"
 "Orden:    [Fecha]"
 
+#
+"Severe skew"
+"\x00"
+
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
 "Orden: [Alfabet.]"
@@ -1014,6 +1094,10 @@
 "Sound      [loud]"
 "Sonido     [alto]"
 
+#
+"Slight skew"
+"\x00"
+
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
 "Sonido  [silenc.]"
@@ -1110,6 +1194,14 @@
 "Tune"
 "Ajustar"
 
+#
+"Unload"
+"\x00"
+
+#
+"Unload all"
+"\x00"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 "Soltar filamento"

lang/lang_en_fr.txt

@@ -154,6 +154,10 @@
 "Calibration done"
 "Calibration terminee"
 
+#
+"Cancel"
+"\x00"
+
 #MSG_MENU_CALIBRATION c=0 r=0
 "Calibration"
 "\x00"
@@ -174,6 +178,10 @@
 "Color not correct"
 "Couleur incorrecte"
 
+#
+"Copy selected language from XFLASH?"
+"\x00"
+
 #MSG_COOLDOWN c=0 r=0
 "Cooldown"
 "Refroidissement"
@@ -194,6 +202,10 @@
 "Crash detected."
 "Crash detecte."
 
+#
+"Crash detected. Resume print?"
+"\x00"
+
 #MSG_CURRENT c=19 r=1
 "Current"
 "Actuel"
@@ -238,6 +250,10 @@
 "Eject filament 4"
 "Ejecter le fil. 4"
 
+#
+"Eject"
+"\x00"
+
 #MSG_EJECT_FILAMENT5 c=17 r=1
 "Eject filament 5"
 "Ejecter le fil. 5"
@@ -278,6 +294,26 @@
 "ERROR: Filament sensor is not responding, please check connection."
 "ERREUR : Le capteur de filament ne repond pas, verifiez la connexion."
 
+#
+"External SPI flash W25X20CL not responding."
+"\x00"
+
+#
+"Extruder 1"
+"\x00"
+
+#
+"Extruder 2"
+"\x00"
+
+#
+"Extruder 3"
+"\x00"
+
+#
+"Extruder 4"
+"\x00"
+
 #MSG_ERROR c=0 r=0
 "ERROR:"
 "ERREUR :"
@@ -358,6 +394,10 @@
 "Filament used"
 "Filament utilise"
 
+#MSG_PRINT_TIME c=19 r=1
+"Print time"
+"\x00"
+
 #MSG_FILE_INCOMPLETE c=20 r=2
 "File incomplete. Continue anyway?"
 "Fichier incomplet. Continuer qd meme ?"
@@ -418,6 +458,10 @@
 "howto.prusa3d.com"
 "\x00"
 
+#
+"Change extruder"
+"\x00"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 "Changer filament"
@@ -510,6 +554,10 @@
 "Insert filament into extruder 4. Click when done."
 "Inserez le filament dans l'extrudeur 4. Cliquez une fois fait."
 
+#
+"Is filament 1 loaded?"
+"\x00"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 "Inserez le filament"
@@ -542,10 +590,18 @@
 "Left hotend fan?"
 "Ventilo tete gauche?"
 
+#
+"Left"
+"\x00"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 "Gauche [um]"
 
+#
+"Lin. correction"
+"Korekce lin."
+
 #MSG_BABYSTEP_Z c=0 r=0
 "Live adjust Z"
 "Ajustement Z en direct"
@@ -594,6 +650,10 @@
 "M221 Invalid extruder "
 "M221 extrudeur invalide "
 
+#
+"Measured skew"
+"\x00"
+
 #MSG_MAIN c=0 r=0
 "Main"
 "Principal"
@@ -658,6 +718,10 @@
 "Move Y"
 "Deplacer Y"
 
+#
+"New firmware version available:"
+"\x00"
+
 #MSG_MOVE_Z c=0 r=0
 "Move Z"
 "Deplacer Z"
@@ -758,6 +822,10 @@
 "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
 "Merci de verifier notre manuel et de corriger le  probleme. Poursuivez alors l'assistant en redemarrant l'imprimante."
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+"\x00"
+
 #MSG_WIZARD_LOAD_FILAMENT c=20 r=8
 "Please insert PLA filament to the extruder, then press knob to load it."
 "Inserez du filament PLA dans l'extrudeur, puis appuyez sur le bouton pour le charger."
@@ -798,6 +866,10 @@
 "Please run XYZ calibration first."
 "Veuillez d'abord lancer la calibration XYZ."
 
+#
+"Please upgrade."
+"\x00"
+
 #MSG_UPDATE_MMU2_FW c=20 r=4
 "Please update firmware in your MMU2. Waiting for reset."
 "Veuillez mettre a jour le firmware de votre MMU2. En attente d'un reset."
@@ -854,6 +926,10 @@
 "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
 "Imprimante arretee a cause d'erreurs. Corrigez l'erreur et utilisez M999 pour redemarrer. (La temperature est reinitilisee. Parametrez la apres le redemarrage)"
 
+#WELCOME_MSG c=20 r=0
+"Prusa i3 MK2.5 ready."
+"Prusa i3 MK2.5 prete."
+
 #WELCOME_MSG c=20 r=0
 "Prusa i3 MK3 ready."
 "Prusa i3 MK3 prete."
@@ -870,6 +946,10 @@
 "Recovering print    "
 "Recup. impression    "
 
+#
+"Resend"
+"\x00"
+
 #MSG_REMOVE_OLD_FILAMENT c=20 r=4
 "Remove old filament and press the knob to start loading new filament."
 "Retirez l'ancien filament puis appuyez sur le bouton pour charger le nouveau."
@@ -890,6 +970,10 @@
 "Resuming print"
 "Reprise de l'impr."
 
+#
+"Right"
+"\x00"
+
 #MSG_BED_CORRECTION_RIGHT c=14 r=1
 "Right side[um]"
 "Droite [um]"
@@ -926,6 +1010,14 @@
 "Searching bed calibration point"
 "Recherche du point de calibration du lit"
 
+#
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#
+"Select PLA filament:"
+"\x00"
+
 #MSG_LANGUAGE_SELECT c=0 r=0
 "Select language"
 "Choisir langue"
@@ -958,6 +1050,10 @@
 "Set temperature:"
 "Regler temp. :"
 
+#
+"Severe skew"
+"\x00"
+
 #MSG_SETTINGS c=0 r=0
 "Settings"
 "Reglages"
@@ -966,6 +1062,14 @@
 "Show end stops"
 "Afficher butees"
 
+#
+"Show pinda state"
+"\x00"
+
+#
+"Slight skew"
+"\x00"
+
 #MSG_DWELL c=0 r=0
 "Sleep..."
 "Repos..."
@@ -1074,6 +1178,14 @@
 "There is still a need to make Z calibration. Please follow the manual, chapter First steps, section Calibration flow."
 "Il y a encore besoin d'effectuer la calibration Z. Veuillez suivre le manuel, chapitre Premiers pas, section Processus de calibration."
 
+#
+"Total filament"
+"\x00"
+
+#
+"Total print time"
+"\x00"
+
 #MSG_ENDSTOP_HIT c=0 r=0
 "TRIGGERED"
 "ACTIVE"
@@ -1082,6 +1194,14 @@
 "Tune"
 "Regler"
 
+#
+"Unload"
+"\x00"
+
+#
+"Unload all"
+"\x00"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 "Decharger fil."
@@ -1156,24 +1276,52 @@
 
 #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
 "XYZ calibration all right. Skew will be corrected automatically."
+"\x00"
 
 #MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
 "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
+"\x00"
 
 #MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
 "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
+"\x00"
 
 #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
 "XYZ calibration compromised. Front calibration points not reachable."
+"\x00"
 
 #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
 "XYZ calibration compromised. Right front calibration point not reachable."
+"\x00"
 
 #MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
 "XYZ calibration compromised. Left front calibration point not reachable."
+"\x00"
 
-#MSG_UNLOAD_ALL c=17 r=0
-"Unload all"
+#MSG_LOAD_ALL c=17 r=0
+"Load all"
+"\x00"
+
+#MSG_LOAD_FILAMENT_1 c=17 r=0
+"Load filament 1"
+"\x00"
 
-#MSG_UNLOAD_FILAMENT_1 c=17 r=0
-"Unload filament 1"
+#MSG_LOAD_FILAMENT_2 c=17 r=0
+"Load filament 2"
+"\x00"
+
+#MSG_LOAD_FILAMENT_3 c=17 r=0
+"Load filament 3"
+"\x00"
+
+#MSG_LOAD_FILAMENT_4 c=17 r=0
+"Load filament 4"
+"\x00"
+
+#MSG_LOAD_FILAMENT_5 c=17 r=0
+"Load filament 5"
+"\x00"
+
+#MSG_OFF c=0 r=0
+" [off]"
+"\x00"

lang/lang_en_it.txt

@@ -158,6 +158,10 @@
 "Calibration"
 "Calibrazione"
 
+#
+"Cancel"
+"\x00"
+
 #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
 "Cannot enter subdir: "
 "Impossibile accedere alla sottocartella: "
@@ -178,6 +182,10 @@
 "Cooldown"
 "Raffredda"
 
+#
+"Copy selected language from XFLASH?"
+"\x00"
+
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
 "Rilevam.imp. [on]"
@@ -246,6 +254,10 @@
 "Eject filament 5"
 "Espelli filamento 5"
 
+#
+"Eject"
+"\x00"
+
 #MSG_EJECTING_FILAMENT c=20 r=1
 "Ejecting filament"
 "Espellendo filamento"
@@ -286,6 +298,26 @@
 "ERROR:"
 "ERRORE:"
 
+#
+"External SPI flash W25X20CL not responding."
+"\x00"
+
+#
+"Extruder 1"
+"\x00"
+
+#
+"Extruder 2"
+"\x00"
+
+#
+"Extruder 3"
+"\x00"
+
+#
+"Extruder 4"
+"\x00"
+
 #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
 "Extruder fan:"
 "Ventola estrusore:"
@@ -426,6 +458,10 @@
 "howto.prusa3d.com"
 "\x00"
 
+#
+"Change extruder"
+"\x00"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 "Cambia filamento"
@@ -518,6 +554,10 @@
 "Insert filament into extruder 4. Click when done."
 "Inserire filamento nell'estrusore 4. Click per continuare"
 
+#
+"Is filament 1 loaded?"
+"\x00"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 "Inserire filamento"
@@ -550,6 +590,10 @@
 "Left hotend fan?"
 "Vent SX hotend?"
 
+#
+"Left"
+"\x00"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 "Lato sinistro [um]"
@@ -630,6 +674,10 @@
 "MMU OK. Resuming temperature..."
 "MMU OK. Ripristino temperatura..."
 
+#
+"Measured skew"
+"\x00"
+
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 "MMU OK. Riprendendo..."
@@ -694,6 +742,10 @@
 "Not connected"
 "Non connesso"
 
+#
+"New firmware version available:"
+"\x00"
+
 #MSG_SELFTEST_FAN_NO c=19 r=0
 "Not spinning"
 "Non gira"
@@ -794,6 +846,10 @@
 "Please press the knob to unload filament"
 "Premete la manopola per scaricare il filamento"
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+"\x00"
+
 #MSG_PULL_OUT_FILAMENT c=20 r=4
 "Please pull out filament immediately"
 "Estrarre il filamento immediatamente"
@@ -834,6 +890,10 @@
 "Preheating nozzle. Please wait."
 "Preriscaldando l'ugello. Attendere prego."
 
+#
+"Please upgrade."
+"\x00"
+
 #MSG_PRESS_TO_PREHEAT c=20 r=4
 "Press knob to preheat nozzle and continue."
 "Premete la manopola per preriscaldare l'ugello e continuare."
@@ -914,6 +974,10 @@
 "RPi port     [on]"
 "Porta RPi    [on]"
 
+#
+"Resend"
+"\x00"
+
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
 "Porta RPi   [off]"
@@ -934,6 +998,10 @@
 "SD card ok"
 "Memoria SD ok"
 
+#
+"Right"
+"\x00"
+
 #MSG_SD_INIT_FAIL c=0 r=0
 "SD init fail"
 "Inizializzazione Memoria SD Fallita"
@@ -970,6 +1038,14 @@
 "Selftest will be run to calibrate accurate sensorless rehoming."
 "Verra effettuato un self test per calibrare l'homing senza sensori."
 
+#
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#
+"Select PLA filament:"
+"\x00"
+
 #MSG_SET_TEMPERATURE c=19 r=1
 "Set temperature:"
 "Imposta temperatura:"
@@ -1002,6 +1078,10 @@
 "Sort:      [time]"
 "Ordine:   [Tempo]"
 
+#
+"Severe skew"
+"\x00"
+
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
 "Ordine:[Alfabet.]"
@@ -1014,6 +1094,10 @@
 "Sound      [loud]"
 "Suono     [forte]"
 
+#
+"Slight skew"
+"\x00"
+
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
 "Suono      [mute]"
@@ -1110,6 +1194,14 @@
 "Tune"
 "Regola"
 
+#
+"Unload"
+"\x00"
+
+#
+"Unload all"
+"\x00"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 "Scarica filam."

lang/lang_en_pl.txt

@@ -158,6 +158,10 @@
 "Calibration"
 "Kalibracja"
 
+#
+"Cancel"
+"\x00"
+
 #MSG_SD_CANT_ENTER_SUBDIR c=0 r=0
 "Cannot enter subdir: "
 "Brak dostepu do subdir: "
@@ -178,6 +182,10 @@
 "Cooldown"
 "Chlodzenie"
 
+#
+"Copy selected language from XFLASH?"
+"\x00"
+
 #MSG_CRASHDETECT_ON c=0 r=0
 "Crash det.   [on]"
 "Wykr. zderzen[wl]"
@@ -246,6 +254,10 @@
 "Eject filament 5"
 "Wysun filament 5"
 
+#
+"Eject"
+"\x00"
+
 #MSG_EJECTING_FILAMENT c=20 r=1
 "Ejecting filament"
 "Wysuwanie filamentu"
@@ -286,6 +298,26 @@
 "ERROR:"
 "BLAD:"
 
+#
+"External SPI flash W25X20CL not responding."
+"\x00"
+
+#
+"Extruder 1"
+"\x00"
+
+#
+"Extruder 2"
+"\x00"
+
+#
+"Extruder 3"
+"\x00"
+
+#
+"Extruder 4"
+"\x00"
+
 #MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0
 "Extruder fan:"
 "Went. ekstrudera:"
@@ -426,6 +458,10 @@
 "howto.prusa3d.com"
 "\x00"
 
+#
+"Change extruder"
+"\x00"
+
 #MSG_FILAMENTCHANGE c=0 r=0
 "Change filament"
 "Wymiana filamentu"
@@ -518,6 +554,10 @@
 "Insert filament into extruder 4. Click when done."
 "Wloz filament do ekstrudera 4. Potwierdz naciskajac pokretlo."
 
+#
+"Is filament 1 loaded?"
+"\x00"
+
 #MSG_INSERT_FILAMENT c=20 r=0
 "Insert filament"
 "Wprowadz filament"
@@ -550,6 +590,10 @@
 "Left hotend fan?"
 "Lewy went hotendu?"
 
+#
+"Left"
+"\x00"
+
 #MSG_BED_CORRECTION_LEFT c=14 r=1
 "Left side [um]"
 "Lewo [um]"
@@ -630,6 +674,10 @@
 "MMU OK. Resuming temperature..."
 "MMU OK. Wznawiam nagrzewanie..."
 
+#
+"Measured skew"
+"\x00"
+
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 "MMU OK. Wznawianie..."
@@ -694,6 +742,10 @@
 "Not connected"
 "Nie podlaczono"
 
+#
+"New firmware version available:"
+"\x00"
+
 #MSG_SELFTEST_FAN_NO c=19 r=0
 "Not spinning"
 "Nie kreci sie"
@@ -794,6 +846,10 @@
 "Please press the knob to unload filament"
 "Nacisnij pokretlo aby rozladowac filament"
 
+#
+"Please insert PLA filament to the first tube of MMU, then press the knob to load it."
+"\x00"
+
 #MSG_PULL_OUT_FILAMENT c=20 r=4
 "Please pull out filament immediately"
 "Wyciagnij filament teraz"
@@ -834,6 +890,10 @@
 "Preheating nozzle. Please wait."
 "Nagrzewanie dyszy. Prosze czekac."
 
+#
+"Please upgrade."
+"\x00"
+
 #MSG_PRESS_TO_PREHEAT c=20 r=4
 "Press knob to preheat nozzle and continue."
 "Wcisnij pokretlo aby rozgrzac dysze i kontynuowac."
@@ -914,6 +974,10 @@
 "RPi port     [on]"
 "Port RPi     [wl]"
 
+#
+"Resend"
+"\x00"
+
 #MSG_SECOND_SERIAL_OFF c=17 r=1
 "RPi port    [off]"
 "Port RPi    [wyl]"
@@ -934,6 +998,10 @@
 "SD card ok"
 "Karta SD OK"
 
+#
+"Right"
+"\x00"
+
 #MSG_SD_INIT_FAIL c=0 r=0
 "SD init fail"
 "Inicjalizacja karty SD nieudana"
@@ -970,6 +1038,14 @@
 "Selftest will be run to calibrate accurate sensorless rehoming."
 "Zostanie uruchomiony Selftest aby dokladnie skalibrowac punkt bazowy bez krancowek."
 
+#
+"Select nozzle preheat temperature which matches your material."
+"\x00"
+
+#
+"Select PLA filament:"
+"\x00"
+
 #MSG_SET_TEMPERATURE c=19 r=1
 "Set temperature:"
 "Ustaw. temperatury:"
@@ -1002,6 +1078,10 @@
 "Sort:      [time]"
 "Sortowanie:[czas]"
 
+#
+"Severe skew"
+"\x00"
+
 #MSG_SORT_ALPHA c=17 r=1
 "Sort:  [alphabet]"
 "Sort.:  [alfabet]"
@@ -1014,6 +1094,10 @@
 "Sound      [loud]"
 "Dzwiek   [Glosny]"
 
+#
+"Slight skew"
+"\x00"
+
 #MSG_SOUND_MUTE c=17 r=1
 "Sound      [mute]"
 "Dzwiek[Wylaczony]"
@@ -1110,6 +1194,14 @@
 "Tune"
 "Strojenie"
 
+#
+"Unload"
+"\x00"
+
+#
+"Unload all"
+"\x00"
+
 #MSG_UNLOAD_FILAMENT c=17 r=0
 "Unload filament"
 "Wyladowanie filamentu"