Handle CALIBRATION_STATUS_LIVE_ADJUST

Firmware/Marlin_main.cpp

@@ -3362,8 +3362,9 @@ bool gcode_M45(bool onlyZ, int8_t verbosity_level)
 			else
 			{
 				// Reset the baby step value and the baby step applied flag.
-				calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION);
-                    eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)),0);
+				calibration_status_clear(CALIBRATION_STATUS_LIVE_ADJUST);
+				eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)),0);
+
 				// Complete XYZ calibration.
 				uint8_t point_too_far_mask = 0;
 				BedSkewOffsetDetectionResultType result = find_bed_offset_and_skew(verbosity_level, point_too_far_mask);
@@ -5142,7 +5143,7 @@ void process_commands()
         (Prusa3D specific)
         */
         case 86:
-            calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
+            calibration_status_clear(CALIBRATION_STATUS_LIVE_ADJUST);
             break;
            
 
@@ -5153,7 +5154,7 @@ void process_commands()
         (Prusa3D specific)
         */
         case 87:
-			calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
+            calibration_status_set(CALIBRATION_STATUS_LIVE_ADJUST);
             break;
 
         /*!
@@ -5605,9 +5606,9 @@ void process_commands()
     */
     case 44: // M44: Prusa3D: Reset the bed skew and offset calibration.
 
-		// Reset the baby step value and the baby step applied flag.
-		calibration_status_store(CALIBRATION_STATUS_ASSEMBLED);
-          eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)),0);
+        // Reset the baby step value and the baby step applied flag.
+        calibration_status_clear(CALIBRATION_STATUS_LIVE_ADJUST);
+        eeprom_update_word(reinterpret_cast<uint16_t *>(&(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)),0);
 
         // Reset the skew and offset in both RAM and EEPROM.
         reset_bed_offset_and_skew();

Firmware/mesh_bed_calibration.cpp

@@ -1,5 +1,6 @@
 #include "Configuration.h"
 #include "ConfigurationStore.h"
+#include "util.h"
 #include "language.h"
 #include "mesh_bed_calibration.h"
 #include "mesh_bed_leveling.h"
@@ -3040,7 +3041,7 @@ void babystep_load()
 {
 	babystepLoadZ = 0;
     // Apply Z height correction aka baby stepping before mesh bed leveling gets activated.
-    if (calibration_status() < CALIBRATION_STATUS_LIVE_ADJUST)
+    if (calibration_status_get(CALIBRATION_STATUS_LIVE_ADJUST))
     {
         check_babystep(); //checking if babystep is in allowed range, otherwise setting babystep to 0
         

Firmware/ultralcd.cpp

@@ -2702,7 +2702,7 @@ static void lcd_babystep_z()
 		}
 
 		// same logic as in babystep_load
-	    if (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST)
+	    if (!calibration_status_get(CALIBRATION_STATUS_LIVE_ADJUST))
 			_md->babystepMemZ = 0;
 
 		_md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS];
@@ -2744,7 +2744,7 @@ static void lcd_babystep_z()
 #ifdef PINDA_THERMISTOR        
 		eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].pinda_temp),current_temperature_pinda);
 #endif //PINDA_THERMISTOR
-		calibration_status_store(CALIBRATION_STATUS_CALIBRATED);
+		calibration_status_set(CALIBRATION_STATUS_LIVE_ADJUST);
 	}
 	if (LCD_CLICKED) menu_back();
 }
@@ -3740,7 +3740,7 @@ void lcd_first_layer_calibration_reset()
     MenuData* menuData = (MenuData*)&(menu_data[0]);
 
     if(LCD_CLICKED || !eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet))) ||
-            (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST) ||
+            (!calibration_status_get(CALIBRATION_STATUS_LIVE_ADJUST)) ||
             (0 == static_cast<int16_t>(eeprom_read_word(reinterpret_cast<uint16_t*>
             (&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))))
     {
@@ -5344,10 +5344,8 @@ static void lcd_reset_sheet()
 	if (selected_sheet == eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))
 	{
         eeprom_switch_to_next_sheet();
-        if((-1 == eeprom_next_initialized_sheet(0)) && (CALIBRATION_STATUS_CALIBRATED == calibration_status()))
-        {
-            calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST);
-        }
+        if (-1 == eeprom_next_initialized_sheet(0))
+            calibration_status_clear(CALIBRATION_STATUS_LIVE_ADJUST);
 	}
 
 	menu_back();