Toggle Mode (stepper power)

Firmware/messages.c

@@ -9,7 +9,6 @@
 
 //internationalized messages
 const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////
-const char MSG_AUTO_MODE_ON[] PROGMEM_I1 = ISTR("Mode [auto power]"); ////
 const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); //// c=18
 const char MSG_BABYSTEP_Z_NOT_SET[] PROGMEM_I1 = ISTR("Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."); ////c=20 r=12
 const char MSG_BED[] PROGMEM_I1 = ISTR("Bed"); ////
@@ -82,10 +81,12 @@ const char MSG_SELFTEST_FILAMENT_SENSOR[] PROGMEM_I1 = ISTR("Filament sensor");
 const char MSG_SELFTEST_WIRINGERROR[] PROGMEM_I1 = ISTR("Wiring error"); ////
 const char MSG_SETTINGS[] PROGMEM_I1 = ISTR("Settings"); ////
 const char MSG_HW_SETUP[] PROGMEM_I1 = ISTR("HW Setup"); ////
-const char MSG_SILENT_MODE_OFF[] PROGMEM_I1 = ISTR("Mode [high power]"); ////
-const char MSG_SILENT_MODE_ON[] PROGMEM_I1 = ISTR("Mode     [silent]"); ////
-const char MSG_STEALTH_MODE_OFF[] PROGMEM_I1 = ISTR("Mode     [Normal]"); ////
-const char MSG_STEALTH_MODE_ON[] PROGMEM_I1 = ISTR("Mode    [Stealth]"); ////
+const char MSG_MODE[] PROGMEM_I1 = ISTR("Mode"); ////
+const char MSG_HIGH_POWER[] PROGMEM_I1 = ISTR("High power"); ////
+const char MSG_AUTO_POWER[] PROGMEM_I1 = ISTR("Auto power"); ////
+const char MSG_SILENT[] PROGMEM_I1 = ISTR("Silent"); ////
+const char MSG_NORMAL[] PROGMEM_I1 = ISTR("Normal"); ////
+const char MSG_STEALTH[] PROGMEM_I1 = ISTR("Stealth"); ////
 const char MSG_STEEL_SHEET_CHECK[] PROGMEM_I1 = ISTR("Is steel sheet on heatbed?"); ////c=20 r=2
 const char MSG_STOP_PRINT[] PROGMEM_I1 = ISTR("Stop print"); ////
 const char MSG_STOPPED[] PROGMEM_I1 = ISTR("STOPPED. "); ////

Firmware/messages.h

@@ -10,7 +10,6 @@ extern "C" {
 // LCD Menu Messages
 //internationalized messages
 extern const char MSG_AUTO_HOME[];
-extern const char MSG_AUTO_MODE_ON[];
 extern const char MSG_BABYSTEP_Z[];
 extern const char MSG_BABYSTEP_Z_NOT_SET[];
 extern const char MSG_BED[];
@@ -82,10 +81,12 @@ extern const char MSG_SELFTEST_FILAMENT_SENSOR[];
 extern const char MSG_SELFTEST_WIRINGERROR[];
 extern const char MSG_SETTINGS[];
 extern const char MSG_HW_SETUP[];
-extern const char MSG_SILENT_MODE_OFF[];
-extern const char MSG_SILENT_MODE_ON[];
-extern const char MSG_STEALTH_MODE_OFF[];
-extern const char MSG_STEALTH_MODE_ON[];
+extern const char MSG_MODE[];
+extern const char MSG_HIGH_POWER[];
+extern const char MSG_AUTO_POWER[];
+extern const char MSG_SILENT[];
+extern const char MSG_NORMAL[];
+extern const char MSG_STEALTH[];
 extern const char MSG_STEEL_SHEET_CHECK[];
 extern const char MSG_STOP_PRINT[];
 extern const char MSG_STOPPED[];

Firmware/ultralcd.cpp

@@ -5172,9 +5172,9 @@ do\
     {\
         if (SilentModeMenu == SILENT_MODE_NORMAL)\
         {\
-            MENU_ITEM_FUNCTION_P(_T(MSG_STEALTH_MODE_OFF), lcd_silent_mode_set);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);\
         }\
-        else MENU_ITEM_FUNCTION_P(_T(MSG_STEALTH_MODE_ON), lcd_silent_mode_set);\
+        else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);\
         if (SilentModeMenu == SILENT_MODE_NORMAL)\
         {\
             if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);\
@@ -5194,16 +5194,16 @@ do\
         switch (SilentModeMenu)\
         {\
         case SILENT_MODE_POWER:\
-            MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_OFF), lcd_silent_mode_set);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
             break;\
         case SILENT_MODE_SILENT:\
-            MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_ON), lcd_silent_mode_set);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set);\
             break;\
         case SILENT_MODE_AUTO:\
-            MENU_ITEM_FUNCTION_P(_T(MSG_AUTO_MODE_ON), lcd_silent_mode_set);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set);\
             break;\
         default:\
-            MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_OFF), lcd_silent_mode_set);\
+            MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\
             break; /* (probably) not needed*/\
         }\
     }\
@@ -6887,8 +6887,8 @@ static void lcd_tune_menu()
 #ifdef TMC2130
      if(!farm_mode)
      {
-          if (SilentModeMenu == SILENT_MODE_NORMAL) MENU_ITEM_FUNCTION_P(_T(MSG_STEALTH_MODE_OFF), lcd_silent_mode_set);
-          else MENU_ITEM_FUNCTION_P(_T(MSG_STEALTH_MODE_ON), lcd_silent_mode_set);
+          if (SilentModeMenu == SILENT_MODE_NORMAL) MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);
+          else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);
 
           if (SilentModeMenu == SILENT_MODE_NORMAL)
           {
@@ -6900,10 +6900,10 @@ static void lcd_tune_menu()
 #else //TMC2130
 	if (!farm_mode) { //dont show in menu if we are in farm mode
 		switch (SilentModeMenu) {
-		case SILENT_MODE_POWER: MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_OFF), lcd_silent_mode_set); break;
-		case SILENT_MODE_SILENT: MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_ON), lcd_silent_mode_set); break;
-		case SILENT_MODE_AUTO: MENU_ITEM_FUNCTION_P(_T(MSG_AUTO_MODE_ON), lcd_silent_mode_set); break;
-		default: MENU_ITEM_FUNCTION_P(_T(MSG_SILENT_MODE_OFF), lcd_silent_mode_set); break; // (probably) not needed
+		case SILENT_MODE_POWER: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break;
+		case SILENT_MODE_SILENT: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set); break;
+		case SILENT_MODE_AUTO: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set); break;
+		default: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break; // (probably) not needed
 		}
 	}
 #endif //TMC2130

lang/lang_en.txt

@@ -412,11 +412,14 @@
 #MSG_MMU_OK_RESUMING c=20 r=4
 "MMU OK. Resuming..."
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
+#MSG_MODE
+"Mode"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
+#MSG_NORMAL
+"Normal"
+
+#MSG_SILENT
+"Silent"
 
 #
 "MMU needs user attention."
@@ -424,14 +427,14 @@
 #
 "MMU power fails"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
+#MSG_STEALTH
+"Stealth"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
+#MSG_AUTO_POWER
+"Auto power"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
+#MSG_HIGH_POWER
+"High power"
 
 #
 "MMU2 connected"

lang/lang_en_cz.txt

@@ -550,13 +550,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Pokracuji..."
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
-"Mod      [Normal]"
+#MSG_MODE
+"Mode"
+"Mod"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
-"Mod       [tichy]"
+#MSG_NORMAL
+"Normal"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Tichy"
 
 #
 "MMU needs user attention."
@@ -566,17 +570,17 @@
 "MMU power fails"
 "MMU vypadky proudu"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
-"Mod       [tichy]"
+#MSG_STEALTH
+"Stealth"
+"Tichy"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
-"Mod [automaticky]"
+#MSG_AUTO_POWER
+"Auto power"
+"Automaticky"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
-"Mod  [vys. vykon]"
+#MSG_HIGH_POWER
+"High power"
+"Vys. vykon"
 
 #
 "MMU2 connected"

lang/lang_en_de.txt

@@ -550,13 +550,17 @@
 "MMU OK. Resuming..."
 "MMU OK.  Weiterdrucken..."
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
-"Modus    [Normal]"
+#MSG_MODE
+"Mode"
+"Modus"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
-"Modus     [leise]"
+#MSG_NORMAL
+"Normal"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Leise"
 
 #
 "MMU needs user attention."
@@ -566,17 +570,17 @@
 "MMU power fails"
 "MMU Netzfehler"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
-"Modus   [Stealth]"
+#MSG_STEALTH
+"Stealth"
+"\x00"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
-"Modus[Auto Power]"
+#MSG_AUTO_POWER
+"Auto power"
+"\x00"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
-"Modus[Hohe Leist]"
+#MSG_HIGH_POWER
+"High power"
+"Hohe leist"
 
 #
 "MMU2 connected"

lang/lang_en_es.txt

@@ -550,13 +550,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Resumiendo..."
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
-"Modo     [Normal]"
+#MSG_MODE
+"Mode"
+"Modo"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
-"Modo   [silencio]"
+#MSG_NORMAL
+"Normal"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Silencio"
 
 #
 "MMU needs user attention."
@@ -566,17 +570,17 @@
 "MMU power fails"
 "Fallo de energia en MMU"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
-"Modo   [Silencio]"
+#MSG_STEALTH
+"Stealth"
+"Silencio"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
-"Modo[fuerza auto]"
+#MSG_AUTO_POWER
+"Auto power"
+"Fuerza auto"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
-"Modo [rend.pleno]"
+#MSG_HIGH_POWER
+"High power"
+"Rend.pleno"
 
 #
 "MMU2 connected"

lang/lang_en_fr.txt

@@ -550,13 +550,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Reprise ..."
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
+#MSG_MODE
+"Mode"
 "\x00"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
-"Mode [silencieux]"
+#MSG_NORMAL
+"Normal"
+"\x00"
+
+#MSG_SILENT
+"Silent"
+"Silencieux"
 
 #
 "MMU needs user attention."
@@ -566,17 +570,17 @@
 "MMU power fails"
 "Echecs alim. MMU"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
-"Mode [Furtif]"
+#MSG_STEALTH
+"Stealth"
+"Furtif"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
-"Mode [puiss.auto]"
+#MSG_AUTO_POWER
+"Auto power"
+"Puiss.auto"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
-"Mode [haute puiss]"
+#MSG_HIGH_POWER
+"High power"
+"Haute puiss"
 
 #
 "MMU2 connected"

lang/lang_en_it.txt

@@ -550,13 +550,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Riprendendo... "
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
-"Modo    [normale]"
+#MSG_MODE
+"Mode"
+"Modo"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
-"Modo [silenzioso]"
+#MSG_NORMAL
+"Normal"
+"Normale"
+
+#MSG_SILENT
+"Silent"
+"Silenzioso"
 
 #
 "MMU needs user attention."
@@ -566,17 +570,17 @@
 "MMU power fails"
 "Mancanza corrente MMU"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
-"Modo [Silenziosa]"
+#MSG_STEALTH
+"Stealth"
+"Silenziosa"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
-"Modo       [auto]"
+#MSG_AUTO_POWER
+"Auto power"
+"Auto"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
-"Mode      [forte]"
+#MSG_HIGH_POWER
+"High power"
+"Forte"
 
 #
 "MMU2 connected"

lang/lang_en_pl.txt

@@ -550,13 +550,17 @@
 "MMU OK. Resuming..."
 "MMU OK. Wznawianie..."
 
-#MSG_STEALTH_MODE_OFF
-"Mode     [Normal]"
-"Tryb   [normalny]"
+#MSG_MODE
+"Mode"
+"Tryb"
 
-#MSG_SILENT_MODE_ON
-"Mode     [silent]"
-"Tryb      [cichy]"
+#MSG_NORMAL
+"Normal"
+"Normalny"
+
+#MSG_SILENT
+"Silent"
+"Cichy"
 
 #
 "MMU needs user attention."
@@ -566,17 +570,17 @@
 "MMU power fails"
 "Zaniki zasil. MMU"
 
-#MSG_STEALTH_MODE_ON
-"Mode    [Stealth]"
-"Tryb    [Stealth]"
+#MSG_STEALTH
+"Stealth"
+"\x00"
 
-#MSG_AUTO_MODE_ON
-"Mode [auto power]"
-"Tryb [automatycz]"
+#MSG_AUTO_POWER
+"Auto power"
+"Automatycz"
 
-#MSG_SILENT_MODE_OFF
-"Mode [high power]"
-"Tryb[wysoka wyd.]"
+#MSG_HIGH_POWER
+"High power"
+"Wysoka wyd."
 
 #
 "MMU2 connected"