New ML support - migration - generated files

lang_upgrade/make_msgs.out

@@ -0,0 +1,7 @@
+ processing language_common.h ...ok (26 messages, 410 characters)
+ processing language_en.h ...ok (373 messages, 9704 characters)
+ processing language_cz.h ...ok (365 messages, 9639 characters)
+ processing language_de.h ...ok (67 messages, 2352 characters)
+ processing language_it.h ...ok (294 messages, 7808 characters)
+ processing language_pl.h ...ok (295 messages, 7308 characters)
+ processing language_es.h ...ok (289 messages, 7516 characters)

lang_upgrade/msgs_common.txt

@@ -0,0 +1,26 @@
+MSG_ACTIVE_EXTRUDER c=0 r=0 "Active Extruder: "
+MSG_AUTHOR c=0 r=0 " | Author: "
+MSG_BROWNOUT_RESET c=0 r=0 " Brown out Reset"
+MSG_COUNT_X c=0 r=0 " Count X: "
+MSG_ERR_LINE_NO c=0 r=0 "Line Number is not Last Line Number+1, Last Line: "
+MSG_ERR_LONG_EXTRUDE_STOP c=0 r=0 " too long extrusion prevented"
+MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM c=0 r=0 "No Line Number with checksum, Last Line: "
+MSG_EXTERNAL_RESET c=0 r=0 " External Reset"
+MSG_FILE_PRINTED c=0 r=0 "Done printing file"
+MSG_FILE_SAVED c=0 r=0 "Done saving file."
+MSG_INVALID_EXTRUDER c=0 r=0 "Invalid extruder"
+MSG_OFF c=0 r=0 "Off"
+MSG_ON c=0 r=0 "On "
+MSG_POSITION_UNKNOWN c=0 r=0 "Home X/Y before Z"
+MSG_SD_SIZE c=0 r=0 " Size: "
+MSG_SOFTWARE_RESET c=0 r=0 " Software Reset"
+MSG_UNKNOWN_COMMAND c=0 r=0 "Unknown command: \""
+MSG_WATCHDOG_RESET c=0 r=0 " Watchdog Reset"
+MSG_X_MAX c=0 r=0 "x_max: "
+MSG_X_MIN c=0 r=0 "x_min: "
+MSG_Y_MAX c=0 r=0 "y_max: "
+MSG_Y_MIN c=0 r=0 "y_min: "
+MSG_Z_MAX c=0 r=0 "z_max: "
+MSG_Z_MIN c=0 r=0 "z_min: "
+MSG_ZPROBE_OUT c=0 r=0 "Z probe out. bed"
+MSG_ZPROBE_ZOFFSET c=0 r=0 "Z Offset"

lang_upgrade/msgs_common_used_more.txt

@@ -0,0 +1,13 @@
+MSG_BROWNOUT_RESET c=0 r=0 " Brown out Reset"
+MSG_EXTERNAL_RESET c=0 r=0 " External Reset"
+MSG_FILE_SAVED c=0 r=0 "Done saving file."
+MSG_OFF c=0 r=0 "Off"
+MSG_ON c=0 r=0 "On "
+MSG_POSITION_UNKNOWN c=0 r=0 "Home X/Y before Z"
+MSG_SOFTWARE_RESET c=0 r=0 " Software Reset"
+MSG_UNKNOWN_COMMAND c=0 r=0 "Unknown command: \""
+MSG_WATCHDOG_RESET c=0 r=0 " Watchdog Reset"
+MSG_Z_MAX c=0 r=0 "z_max: "
+MSG_Z_MIN c=0 r=0 "z_min: "
+MSG_ZPROBE_OUT c=0 r=0 "Z probe out. bed"
+MSG_ZPROBE_ZOFFSET c=0 r=0 "Z Offset"

lang_upgrade/msgs_common_used_once.txt

@@ -0,0 +1,13 @@
+MSG_ACTIVE_EXTRUDER c=0 r=0 "Active Extruder: "
+MSG_AUTHOR c=0 r=0 " | Author: "
+MSG_COUNT_X c=0 r=0 " Count X: "
+MSG_ERR_LINE_NO c=0 r=0 "Line Number is not Last Line Number+1, Last Line: "
+MSG_ERR_LONG_EXTRUDE_STOP c=0 r=0 " too long extrusion prevented"
+MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM c=0 r=0 "No Line Number with checksum, Last Line: "
+MSG_FILE_PRINTED c=0 r=0 "Done printing file"
+MSG_INVALID_EXTRUDER c=0 r=0 "Invalid extruder"
+MSG_SD_SIZE c=0 r=0 " Size: "
+MSG_X_MAX c=0 r=0 "x_max: "
+MSG_X_MIN c=0 r=0 "x_min: "
+MSG_Y_MAX c=0 r=0 "y_max: "
+MSG_Y_MIN c=0 r=0 "y_min: "

lang_upgrade/msgs_cz.txt

@@ -0,0 +1,365 @@
+MSG_ADJUSTZ "Auto doladit Z ?"
+MSG_ALL "Vse"
+MSG_AUTO_HOME "Auto home"
+MSG_AUTO_MODE_ON "Mod [automaticky]"
+MSG_AUTOLOAD_FILAMENT "AutoZavedeni fil."
+MSG_AUTOLOADING_ENABLED "Automaticke zavadeni filamentu aktivni, stisknete tlacitko a vlozte filament..."
+MSG_AUTOLOADING_ONLY_IF_FSENS_ON "Automaticke zavadeni filamentu dostupne pouze pri zapnutem filament senzoru..."
+MSG_BABYSTEP_X "Babystep X"
+MSG_BABYSTEP_Y "Babystep Y"
+MSG_BABYSTEP_Z "Doladeni osy Z"
+MSG_BABYSTEP_Z_NOT_SET "Neni zkalibrovana vzdalenost trysky od tiskove podlozky. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Nastaveni prvni vrstvy."
+MSG_BABYSTEPPING_X "Babystepping X"
+MSG_BABYSTEPPING_Y "Babystepping Y"
+MSG_BABYSTEPPING_Z "Dostavovani Z"
+MSG_BED "Bed"
+MSG_BED_CORRECTION_FRONT "Vpredu [um]"
+MSG_BED_CORRECTION_LEFT "Vlevo  [um]"
+MSG_BED_CORRECTION_MENU "Korekce podlozky"
+MSG_BED_CORRECTION_REAR "Vzadu  [um]"
+MSG_BED_CORRECTION_RESET "Reset"
+MSG_BED_CORRECTION_RIGHT "Vpravo [um]"
+MSG_BED_DONE "Bed OK."
+MSG_BED_HEATING "Zahrivani bed"
+MSG_BED_HEATING_SAFETY_DISABLED "Zahrivani preruseno bezpecnostnim casovacem."
+MSG_BED_LEVELING_FAILED_POINT_HIGH "Kalibrace Z selhala. Sensor sepnul prilis vysoko. Cekam na reset."
+MSG_BED_LEVELING_FAILED_POINT_LOW "Kalibrace Z selhala. Sensor nesepnul. Znecistena tryska? Cekam na reset."
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Kalibrace Z selhala. Sensor je odpojeny nebo preruseny kabel. Cekam na reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Kalibrace XYZ selhala. Predni kalibracni body moc vpredu. Srovnejte tiskarnu."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Kalibrace XYZ selhala. Levy predni bod moc vpredu. Srovnejte tiskarnu."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Kalibrace XYZ selhala. Pravy predni bod moc vpredu. Srovnejte tiskarnu."
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibrace XYZ selhala. Nahlednete do manualu."
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Kalibrace XYZ v poradku. X/Y osy jsou kolme. Gratuluji!"
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibrace XYZ selhala. Kalibracni bod podlozky nenalezen."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Kalibrace XYZ v poradku. Zkoseni bude automaticky vyrovnano pri tisku."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Kalibrace XYZ v poradku. X/Y osy mirne zkosene. Dobra prace!"
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Kalibrace XYZ nepresna. Predni kalibracni body moc vpredu."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Kalibrace XYZ nepresna. Levy predni bod moc vpredu."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Kalibrace XYZ nepresna. Pravy predni bod moc vpredu."
+MSG_BEGIN_FILE_LIST "Begin file list"
+MSG_CALIBRATE_BED "Kalibrace XYZ"
+MSG_CALIBRATE_BED_RESET "Reset XYZ kalibr."
+MSG_CALIBRATE_E "Kalibrovat E"
+MSG_CALIBRATE_PINDA "Zkalibrovat"
+MSG_CALIBRATE_Z_AUTO "Kalibruji Z"
+MSG_CALIBRATION_PINDA_MENU "Teplot. kalibrace"
+MSG_CARD_MENU "Tisk z SD"
+MSG_CLEAN_NOZZLE_E "E kalibrace ukoncena. Prosim ocistete trysku. Po te potvrdte tlacitkem."
+MSG_CNG_SDCARD "Vymenit SD"
+MSG_CONFIGURATION_VER " Last Updated: "
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Dojely oba Z voziky k~hornimu dorazu?"
+MSG_CONFIRM_NOZZLE_CLEAN "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem."
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamenty jsou srovnany. Pro uspesnou kalibraci prosim ocistete trysku. Po te potvrdte tlacitkem."
+MSG_CONTROL "Kontrola"
+MSG_COOLDOWN "Zchladit"
+MSG_CORRECTLY "Vymena ok?"
+MSG_CRASH_DET_ONLY_IN_NORMAL "\x1b[2JCrash detekce muze\x1b[1;0Hbyt zapnuta pouze v\x1b[2;0HNormal modu"
+MSG_CRASH_DET_STEALTH_FORCE_OFF "\x1b[2JPOZOR:\x1b[1;0HCrash detekce\x1b[2;0Hdeaktivovana ve\x1b[3;0HStealth modu"
+MSG_CRASH_DETECTED "Detekovan naraz."
+MSG_CRASH_DETECTED2 "Naraz detekovan, pokracovat v tisku?"
+MSG_CRASHDETECT_NA "Crash det.  [N/A]"
+MSG_CRASHDETECT_OFF "Crash det.  [vyp]"
+MSG_CRASHDETECT_ON "Crash det.  [zap]"
+MSG_CURRENT "Pouze aktualni"
+MSG_DATE "Datum:"
+MSG_DEFAULT_SETTINGS_LOADED "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
+MSG_DISABLE_STEPPERS "Vypnout motory"
+MSG_DWELL "Sleep..."
+MSG_E_CAL_KNOB "Otacejte tlacitkem dokud znacka nedosahne tela extruderu. Potvrdte tlacitkem."
+MSG_END_FILE_LIST "End file list"
+MSG_ENDSTOP_HIT "TRIGGERED"
+MSG_ENDSTOP_OPEN "open"
+MSG_ENDSTOPS_HIT "endstops hit: "
+MSG_Enqueing "enqueing \""
+MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
+MSG_ERR_KILLED "Printer halted. kill() called!"
+MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
+MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
+MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+MSG_ERROR "CHYBA:"
+MSG_EXTRUDER "Extruder"
+MSG_EXTRUDER_1 "Extruder 1"
+MSG_EXTRUDER_2 "Extruder 2"
+MSG_EXTRUDER_3 "Extruder 3"
+MSG_EXTRUDER_4 "Extruder 4"
+MSG_FACTOR " \002 Fact"
+MSG_FAN_SPEED "Rychlost vent."
+MSG_FANS_CHECK_OFF "Kontr. vent.[vyp]"
+MSG_FANS_CHECK_ON "Kontr. vent.[zap]"
+MSG_FIL_ADJUSTING "Probiha srovnani filamentu. Prosim cekejte."
+MSG_FILAMENT_CLEAN "Filament vytlacen a spravne barvy?" 
+MSG_FILAMENT_LOADING_T0 "Vlozte filament do extruderu 1. Potvrdte tlacitkem."
+MSG_FILAMENT_LOADING_T1 "Vlozte filament do extruderu 2. Potvrdte tlacitkem."
+MSG_FILAMENT_LOADING_T2 "Vlozte filament do extruderu 3. Potvrdte tlacitkem."
+MSG_FILAMENT_LOADING_T3 "Vlozte filament do extruderu 4. Potvrdte tlacitkem."
+MSG_FILAMENT_SENSOR "Senzor filamentu"
+MSG_FILAMENTCHANGE "Vymenit filament"
+MSG_FILE_CNT "Nektere soubory nebudou setrideny. Maximalni pocet souboru pro setrideni je 100."
+MSG_FILE_INCOMPLETE "Soubor nekompletni. Pokracovat?"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iterace "
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Hledam kalibracni bod podlozky"
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " z 4"
+MSG_FINISHING_MOVEMENTS "Dokoncovani pohybu"
+MSG_FLOW "Prutok"
+MSG_FLOW0 "Prutok 0"
+MSG_FLOW1 "Prutok 1"
+MSG_FLOW2 "Prutok 2"
+MSG_FOLLOW_CALIBRATION_FLOW "Tiskarna nebyla jeste zkalibrovana. Postupujte prosim podle manualu, kapitola Zaciname, odstavec Postup kalibrace."
+MSG_FORCE_SELFTEST "Pro kalibraci presneho rehomovani bude nyni spusten selftest."
+MSG_FREE_MEMORY " Free Memory: "
+MSG_FSENS_AUTOLOAD_NA "F. autozav. [N/A]"
+MSG_FSENS_AUTOLOAD_OFF "F. autozav. [vyp]"
+MSG_FSENS_AUTOLOAD_ON "F. autozav. [zap]"
+MSG_FSENS_NOT_RESPONDING "CHYBA: Filament senzor nereaguje, zkontrolujte zapojeni."
+MSG_FSENSOR_NA "Fil. senzor [N/A]"
+MSG_FSENSOR_OFF "Fil. senzor [vyp]"
+MSG_FSENSOR_ON "Fil. senzor [zap]" 
+MSG_FW_VERSION_ALPHA "Pouzivate alpha verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny." 
+MSG_FW_VERSION_BETA "Pouzivate beta verzi firmwaru. Jedna se o vyvojovou verzi. Pouzivani teto verze firmware neni doporuceno a muze zpusobit poskozeni tiskarny."
+MSG_FW_VERSION_RC "Tato verze firmware je release candidate. Nektere z funkci nemusi pracovat spolehlive."
+MSG_FW_VERSION_UNKNOWN "VAROVANI: Neznama, nepodporovana verze firmware. Pouziti na vlastni nebezpeci!"
+MSG_HEATING "Zahrivani"
+MSG_HEATING_COMPLETE "Zahrivani OK."
+MSG_HOMEYZ "Kalibrovat Z"
+MSG_HOMEYZ "Kalibrovat Z"
+MSG_HOMEYZ_DONE "Kalibrace OK"
+MSG_HOMEYZ_DONE "Kalibrace OK"
+MSG_HOMEYZ_PROGRESS "Kalibruji Z"
+MSG_HOMEYZ_PROGRESS "Kalibruji Z"
+MSG_CHANGE_EXTR "Zmenit extruder"
+MSG_CHANGE_SUCCESS "Zmena uspesna!"
+MSG_CHANGED_BOTH "Varovani: doslo ke zmene typu tiskarny a motherboardu."
+MSG_CHANGED_MOTHERBOARD "Varovani: doslo ke zmene typu motherboardu."
+MSG_CHANGED_PRINTER "Varovani: doslo ke zmene typu tiskarny."
+MSG_CHANGING_FILAMENT "Vymena filamentu!"
+MSG_CHECK_IDLER "Prosim otevrete idler a manualne odstrante filament."
+MSG_CHOOSE_EXTRUDER "Vyberte extruder:"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Zlepsuji presnost kalibracniho bodu"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " z 4"
+MSG_INFO_EXTRUDER "Extruder info"
+MSG_INFO_NOZZLE_FAN "Trysk. vent:"
+MSG_INFO_PRINT_FAN "Tisk. vent:"
+MSG_INIT_SDCARD "Inic. SD"
+MSG_INSERT_FILAMENT "Vlozte filament"
+MSG_KILLED "KILLED. "
+MSG_LANGUAGE_NAME "Cestina"
+MSG_LANGUAGE_SELECT "Vyber jazyka"
+MSG_LEFT "Levy:"
+MSG_LOAD_ALL "Zavest vse"
+MSG_LOAD_EPROM "Ulozit pamet"
+MSG_LOAD_FILAMENT "Zavest filament"
+MSG_LOAD_FILAMENT_1 "Zavest filament 1"
+MSG_LOAD_FILAMENT_2 "Zavest filament 2"
+MSG_LOAD_FILAMENT_3 "Zavest filament 3"
+MSG_LOAD_FILAMENT_4 "Zavest filament 4"
+MSG_LOADING_COLOR "Cisteni barvy"
+MSG_LOADING_FILAMENT "Zavadeni filamentu"
+MSG_LOOSE_PULLEY "Uvolnena remenicka"
+MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+MSG_M117_V2_CALIBRATION "M117 Kal. prvni vrstvy"
+MSG_M119_REPORT "Reporting endstop status"
+MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
+MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
+MSG_MAIN "Hlavni nabidka"
+MSG_MARK_FIL "Oznacte filament 100 mm od tela extruderu a po te potvrdte tlacitkem."
+MSG_MAX " \002 Max"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Merim referencni vysku kalibracniho bodu"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " z 9"
+MSG_MEASURED_SKEW "Merene zkoseni:"
+MSG_MENU_BELT_STATUS "Stav remenu"
+MSG_MENU_CALIBRATION "Kalibrace"
+MSG_MENU_TEMPERATURES "Teploty"
+MSG_MENU_VOLTAGES "Napeti"
+MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
+MSG_MIN " \002 Min"
+MSG_MOTION "Pohyb"
+MSG_MOVE_AXIS "Posunout osu"
+MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibrace XYZ. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibrace Z. Otacenim tlacitka posunte Z osu az k~hornimu dorazu. Potvrdte tlacitkem."
+MSG_MOVE_E "Extruder"
+MSG_MOVE_X "Posunout X"
+MSG_MOVE_Y "Posunout Y"
+MSG_MOVE_Z "Posunout Z"
+MSG_NEW_FIRMWARE_AVAILABLE "Vysla nova verze firmware:"
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosim aktualizujte."
+MSG_NO "Ne"
+MSG_NO_CARD "Zadna SD karta"
+MSG_NO_MOVE "No move."
+MSG_NOT_COLOR "Barva neni cista"
+MSG_NOT_LOADED "Filament nezaveden"
+MSG_NOZZLE "Tryska"
+MSG_NOZZLE1 "Tryska2"
+MSG_NOZZLE2 "Tryska3"
+MSG_OK "ok"
+MSG_PAPER "Umistete list papiru na podlozku a udrzujte jej pod tryskou behem mereni prvnich 4 bodu. Pokud tryska zachyti papir, vypnete tiskarnu."
+MSG_PAUSE_PRINT "Pozastavit tisk"
+MSG_PICK_Z "Vyberte vytisk"
+MSG_PID_EXTRUDER "PID kalibrace"
+MSG_PID_FINISHED "PID kal. ukoncena"
+MSG_PID_RUNNING "PID kal.           "
+MSG_PINDA_NOT_CALIBRATED "Tiskarna nebyla teplotne zkalibrovana"
+MSG_PINDA_PREHEAT "Nahrivani PINDA"
+MSG_PLA_FILAMENT_LOADED "Je PLA filament zaveden?"
+MSG_PLACE_STEEL_SHEET "Umistete prosim tiskovy plat na heatbed"
+MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+MSG_PLEASE_LOAD_PLA "Nejdrive zavedte PLA filament prosim."
+MSG_PLEASE_WAIT "Prosim cekejte"
+MSG_POWERUP "PowerUp"
+MSG_PREHEAT "Predehrev"
+MSG_PREHEAT_NOZZLE "Predehrejte trysku!"
+MSG_PREPARE_FILAMENT "Pripravte filament"
+MSG_PRESS "a stisknete tlacitko"
+MSG_PRESS_TO_PREHEAT "Pro nahrati trysky a pokracovani stisknete tlacitko."
+MSG_PRESS_TO_UNLOAD "Pro vysunuti filamentu stisknete prosim tlacitko"	
+MSG_PRINT_ABORTED "Tisk prerusen"
+MSG_PRINT_PAUSED "Tisk pozastaven"
+MSG_PULL_OUT_FILAMENT "Prosim vyjmete urychlene filament"
+MSG_REBOOT "Restartujte tiskarnu"
+MSG_RECOVER_PRINT "Detekovan vypadek proudu.Obnovit tisk?"
+MSG_RECOVERING_PRINT "Obnovovani tisku    "
+MSG_RECTRACT "Rectract"
+MSG_REFRESH "\xF8" "Obnovit"
+MSG_REMOVE_STEEL_SHEET "Odstrante tiskovy plat z heatbed prosim."
+MSG_RESEND "Resend: "
+MSG_RESTORE_FAILSAFE "Obnovit vychozi"
+MSG_RESUME_PRINT "Pokracovat"
+MSG_RESUMING "Obnoveni tisku"
+MSG_RESUMING_PRINT "Obnovovani tisku"
+MSG_RIGHT "Pravy:"
+MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
+MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+MSG_SD_CARD_OK "SD card ok"
+MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+MSG_SD_FILE_OPENED "File opened: "
+MSG_SD_FILE_SELECTED "File selected"
+MSG_SD_INIT_FAIL "SD init fail"
+MSG_SD_INSERTED "Karta vlozena"
+MSG_SD_NOT_PRINTING "Not SD printing"
+MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+MSG_SD_OPENROOT_FAIL "openRoot failed"
+MSG_SD_PRINTING_BYTE "SD printing byte "
+MSG_SD_REMOVED "Karta vyjmuta"
+MSG_SD_VOL_INIT_FAIL "volume.init failed"
+MSG_SD_WORKDIR_FAIL "workDir open failed"
+MSG_SD_WRITE_TO_FILE "Writing to file: "
+MSG_SECOND_SERIAL_OFF "RPi port    [vyp]"
+MSG_SECOND_SERIAL_ON "RPi port    [zap]"
+MSG_SELFTEST "Selftest         "
+MSG_SELFTEST_AXIS "Osa"
+MSG_SELFTEST_AXIS_LENGTH "Delka osy"
+MSG_SELFTEST_BEDHEATER "Bed / Heater"
+MSG_SELFTEST_COOLING_FAN "Predni tiskovy vent?"
+MSG_SELFTEST_ENDSTOP "Endstop"
+MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
+MSG_SELFTEST_ENDSTOPS "Endstops"
+MSG_SELFTEST_ERROR "Selftest error !"
+MSG_SELFTEST_EXTRUDER_FAN "Levy vent na trysce?"
+MSG_SELFTEST_EXTRUDER_FAN_SPEED "Levy vent.:"
+MSG_SELFTEST_FAILED "Selftest selhal  "
+MSG_SELFTEST_FAN "Test ventilatoru"
+MSG_SELFTEST_FAN_NO "Netoci se"
+MSG_SELFTEST_FAN_YES "Toci se"
+MSG_SELFTEST_FANS "Predni/levy vent."
+MSG_SELFTEST_FILAMENT_SENSOR "Senzor filamentu:"
+MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
+MSG_SELFTEST_CHECK_ALLCORRECT "Vse OK           "
+MSG_SELFTEST_CHECK_BED "Kontrola bed     "
+MSG_SELFTEST_CHECK_ENDSTOPS "Kontrola endstops"
+MSG_SELFTEST_CHECK_FSENSOR "Kontrola senzoru"
+MSG_SELFTEST_CHECK_HOTEND "Kontrola hotend  "  
+MSG_SELFTEST_CHECK_X "Kontrola X axis  "
+MSG_SELFTEST_CHECK_Y "Kontrola Y axis  "
+MSG_SELFTEST_CHECK_Z "Kontrola Z axis  "
+MSG_SELFTEST_MOTOR "Motor"
+MSG_SELFTEST_NOTCONNECTED "Nezapojeno    "
+MSG_SELFTEST_OK "Self test OK"
+MSG_SELFTEST_PLEASECHECK "Zkontrolujte :"	
+MSG_SELFTEST_PRINT_FAN_SPEED "Tiskovy vent.:"
+MSG_SELFTEST_START "Self test start  "
+MSG_SELFTEST_SWAPPED "Prohozene"
+MSG_SELFTEST_WIRINGERROR "Chyba zapojeni"
+MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
+MSG_SET_HOME_OFFSETS "Nastav pocatek home"
+MSG_SET_ORIGIN "Nastav pocatek"
+MSG_SET_TEMPERATURE "Nastavte teplotu:"
+MSG_SETTINGS "Nastaveni"
+MSG_SEVERE_SKEW "Tezke zkoseni:"
+MSG_SHOW_END_STOPS "Stav konc. spin."
+MSG_SILENT_MODE_OFF "Mod  [vys. vykon]" 
+MSG_SILENT_MODE_ON "Mod       [tichy]"
+MSG_SLIGHT_SKEW "Lehke zkoseni:"
+MSG_SORT_ALPHA "Trideni [Abeceda]"
+MSG_SORT_NONE "Trideni   [Zadne]"
+MSG_SORT_TIME "Trideni     [Cas]"
+MSG_SORTING "Trideni souboru"
+MSG_SPEED "Rychlost"
+MSG_STACK_ERROR "Chyba - Doslo k prepisu staticke pameti!"
+MSG_STATISTICS "Statistika  "
+MSG_STATS_FILAMENTUSED "Filament :  "
+MSG_STATS_PRINTTIME "Cas tisku :  "
+MSG_STATS_TOTALFILAMENT "Filament celkem :"
+MSG_STATS_TOTALPRINTTIME "Celkovy cas :"
+MSG_STEALTH_MODE_OFF "Mod      [Normal]"
+MSG_STEALTH_MODE_ON "Mod     [Stealth]"
+MSG_STEEL_SHEET_CHECK "Je tiskovy plat na heatbed?"
+MSG_STEPPER_TOO_HIGH "Steprate too high: "
+MSG_STOP_PRINT "Zastavit tisk"
+MSG_STOPPED "STOPPED. "
+MSG_STORE_EPROM "Store memory"
+MSG_SUPPORT "Podpora"
+MSG_SWITCH_PS_OFF "Zapnout zdroj"
+MSG_SWITCH_PS_ON "Vypnout zdroj"
+MSG_TAKE_EFFECT " pro projeveni zmen"	
+MSG_TEMP_CAL_FAILED "Teplotni kalibrace selhala"
+MSG_TEMP_CALIBRATION "Tepl. kal.          "
+MSG_TEMP_CALIBRATION_DONE "Teplotni kalibrace dokoncena a je nyni aktivni. Teplotni kalibraci je mozno deaktivovat v menu Nastaveni->Tepl. kal."
+MSG_TEMP_CALIBRATION_OFF "Tepl. kal.  [vyp]"
+MSG_TEMP_CALIBRATION_ON "Tepl. kal.  [zap]"
+MSG_TEMPERATURE "Teplota"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card  [normal]"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
+MSG_TUNE "Ladit"
+MSG_UNLOAD_ALL "Vyjmout vse"
+MSG_UNLOAD_FILAMENT "Vyjmout filament"
+MSG_UNLOAD_FILAMENT_1 "Vyjmout filam. 1"
+MSG_UNLOAD_FILAMENT_2 "Vyjmout filam. 2"
+MSG_UNLOAD_FILAMENT_3 "Vyjmout filam. 3"
+MSG_UNLOAD_FILAMENT_4 "Vyjmout filam. 4"
+MSG_UNLOAD_SUCCESSFUL "Bylo vysunuti filamentu uspesne?"
+MSG_UNLOADING_FILAMENT "Vysouvam filament"
+MSG_USB_PRINTING "Tisk z USB  "
+MSG_USED "Pouzite behem tisku"
+MSG_USERWAIT "Wait for user..."
+MSG_V2_CALIBRATION "Kal. prvni vrstvy"
+MSG_VOLUMETRIC "Filament"
+MSG_VOLUMETRIC_ENABLED "E in mm3"
+MSG_WAITING_TEMP "Cekani na zchladnuti trysky a podlozky."
+MSG_WAITING_TEMP_PINDA "Cekani na zchladnuti PINDA"
+MSG_WATCH "Informace"
+MSG_WIZARD "Wizard"
+MSG_WIZARD_CALIBRATION_FAILED "Prosim nahlednete do manualu a opravte problem. Po te obnovte Wizarda rebootovanim tiskarny."
+MSG_WIZARD_CLEAN_HEATBED "Prosim ocistete heatbed a stisknete tlacitko."
+MSG_WIZARD_DONE "Vse je hotovo."
+MSG_WIZARD_FILAMENT_LOADED "Je filament zaveden?"
+MSG_WIZARD_HEATING "Predehrivam trysku. Prosim cekejte."
+MSG_WIZARD_INSERT_CORRECT_FILAMENT "Prosim zavedte PLA filament a po te obnovte Wizarda stisknutim reset tlacitka."
+MSG_WIZARD_LOAD_FILAMENT "Prosim vlozte PLA filament do extruderu, po te stisknete tlacitko pro zavedeni filamentu."
+MSG_WIZARD_PLA_FILAMENT "Je to PLA filament?"		
+MSG_WIZARD_QUIT "Wizarda muzete kdykoliv znovu spustit z menu Calibration -> Wizard"
+MSG_WIZARD_REPEAT_V2_CAL "Chcete opakovat posledni krok a pozmenit vzdalenost mezi tryskou a heatbed?"
+MSG_WIZARD_RERUN "Spusteni Wizarda vymaze ulozene vysledky vsech kalibraci a spusti kalibracni proces od zacatku. Pokracovat?"
+MSG_WIZARD_SELFTEST "Nejdriv pomoci selftestu zkontoluji nejcastejsi chyby vznikajici pri sestaveni tiskarny."
+MSG_WIZARD_V2_CAL "Nyni zkalibruji vzdalenost mezi koncem trysky a povrchem heatbedu."
+MSG_WIZARD_V2_CAL_2 "Zacnu tisknout linku a Vy budete postupne snizovat trysku otacenim tlacitka dokud nedosahnete optimalni vysky. Prohlednete si obrazky v nasi prirucce v kapitole Kalibrace"
+MSG_WIZARD_WELCOME "Dobry den, jsem vase tiskarna Original Prusa i3. Chcete abych Vas provedla kalibracnim procesem?"
+MSG_WIZARD_WILL_PREHEAT "Nyni predehreji trysku pro PLA."
+MSG_WIZARD_XYZ_CAL "Nyni provedu xyz kalibraci. Zabere to priblizne 12 min."
+MSG_WIZARD_Z_CAL "Nyni provedu z kalibraci."
+MSG_XYZ_DETAILS "Detaily XYZ kal."
+MSG_Y_DISTANCE_FROM_MIN "Y vzdalenost od min:"
+MSG_YES "Ano"
+WELCOME_MSG CUSTOM_MENDEL_NAME " ok"

lang_upgrade/msgs_de.txt

@@ -0,0 +1,67 @@
+MSG_ALL "Alle"
+MSG_CALIBRATE_PINDA "Kalibrieren"
+MSG_CALIBRATION_PINDA_MENU "Temp. kalibrieren"
+MSG_CURRENT "Aktuelles"
+MSG_DATE "Datum"
+MSG_EXTRUDER "Extruder"
+MSG_EXTRUDER_1 "Extruder 1"
+MSG_EXTRUDER_2 "Extruder 2"
+MSG_EXTRUDER_3 "Extruder 3"
+MSG_EXTRUDER_4 "Extruder 4"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteration "
+MSG_FINISHING_MOVEMENTS "Bewegung beenden"
+MSG_CHOOSE_EXTRUDER "Waehlen Sie Extruder"
+MSG_LEFT "Links:"
+MSG_LOAD_ALL "Alle laden"
+MSG_LOAD_FILAMENT_1 "Filament 1 laden"
+MSG_LOAD_FILAMENT_2 "Filament 2 laden"
+MSG_LOAD_FILAMENT_3 "Filament 3 laden"
+MSG_LOAD_FILAMENT_4 "Filament 4 laden"
+MSG_M117_V2_CALIBRATION "M117 Erste-Schicht Kal."
+MSG_MEASURED_SKEW "Schraeglauf:"
+MSG_PID_EXTRUDER "PID Kalibrierung"
+MSG_PID_FINISHED "PID Kalib. fertig"
+MSG_PID_RUNNING "PID Kalib."
+MSG_PINDA_NOT_CALIBRATED "Temperatur wurde nicht kalibriert"
+MSG_PINDA_PREHEAT "PINDA erwaermen"
+MSG_PLA_FILAMENT_LOADED "Ist PLA Filament geladen?"
+MSG_PLEASE_LOAD_PLA "Bitte laden Sie zuerst PLA Filament."
+MSG_PREPARE_FILAMENT "Filam. bereithalten"
+MSG_PRINT_PAUSED "Druck pausiert"
+MSG_RESUMING_PRINT "Druck weitergehen"
+MSG_RIGHT "Rechts:"
+MSG_SET_TEMPERATURE "Temp. einsetzen"
+MSG_SEVERE_SKEW "Schwerer Schr.:"
+MSG_SLIGHT_SKEW "Leichter Schr.:"
+MSG_TEMP_CALIBRATION "Temp Kalib.         "
+MSG_TEMP_CALIBRATION_DONE "Temp. Kalibrierung fertig. Klicken um weiter zu gehen."
+MSG_TEMP_CALIBRATION_OFF "Temp. Kal. [OFF]"
+MSG_TEMP_CALIBRATION_ON "Temp. Kal. [ON]"
+MSG_UNLOAD_ALL "Alles entladen"
+MSG_UNLOAD_FILAMENT_1 "Filam. 1 entladen"
+MSG_UNLOAD_FILAMENT_2 "Filam. 2 entladen"
+MSG_UNLOAD_FILAMENT_3 "Filam. 3 entladen"
+MSG_UNLOAD_FILAMENT_4 "Filam. 4 entladen"
+MSG_USED "Beim Druck benutzte"
+MSG_V2_CALIBRATION "Erste-Schicht Kal"
+MSG_WIZARD "Wizard"
+MSG_WIZARD_CALIBRATION_FAILED "Bitte ueberpruefen Sie unser Handbuch und beheben Sie das Problem. Fahren Sie dann mit dem Assistenten fort, indem Sie den Drucker neu starten."
+MSG_WIZARD_CLEAN_HEATBED "Bitte reinigen Sie das Heizbett und druecken Sie dann den Knopf."
+MSG_WIZARD_DONE "Alles wurde getan. Viel Spass beim Drucken!"
+MSG_WIZARD_FILAMENT_LOADED "Ist das Filament geladen?"
+MSG_WIZARD_HEATING "Vorheizen der Duese. Bitte warten."
+MSG_WIZARD_INSERT_CORRECT_FILAMENT "Bitte laden Sie PLA-Filament und fahren Sie mit dem Assistenten fort, indem Sie den Drucker neu starten."
+MSG_WIZARD_LOAD_FILAMENT "Fuehren Sie bitte PLA Filament in den Extruder und bestaetigen Sie den Knopf um es zu laden."
+MSG_WIZARD_PLA_FILAMENT "Ist es wirklich PLA Filament?"
+MSG_WIZARD_QUIT "Sie koennen immer den Asistenten im Menu neu aufrufen: Kalibrierung -> Assistant"
+MSG_WIZARD_REPEAT_V2_CAL "Moechten Sie den letzten Schritt wiederholen um den Abstand zwischen Duese und Druckbett neu einzustellen?"
+MSG_WIZARD_RERUN "Der laufende Assistent loescht die aktuelle Kalibrierergebnisse und wird von Anfang an beginnen. Fortsetzen?"
+MSG_WIZARD_SELFTEST "Zunaechst fuehre ich den Selbsttest durch um die haeufigsten Probleme bei der Aufbau zu ueberpruefen."
+MSG_WIZARD_V2_CAL "Jetzt werde ich den Abstand zwischen Duesenspitze und Druckbett kalibrieren."
+MSG_WIZARD_V2_CAL_2 "Ich werde jetzt erste Linie drucken. Waehrend des Druckes koennen Sie die Duese allmaehlich senken indem Sie den Knopf drehen, bis Sie die optimale Hoehe erreichen. Ueberpruefen Sie die Bilder in unserem Handbuch im Kapitel Kalibrierung"
+MSG_WIZARD_WELCOME "Hallo, ich bin dein Original Prusa i3 Drucker. Moechten Sie meine Hilfe durch den Setup-Prozess?"
+MSG_WIZARD_WILL_PREHEAT "Jetzt werde ich die Duese fuer PLA vorheizen. "
+MSG_WIZARD_XYZ_CAL "Ich werde jetzt die XYZ-Kalibrierung durchfuehren. Es wird ca. 12 Minuten dauern"
+MSG_WIZARD_Z_CAL "Ich werde jetzt die Z Kalibrierung durchfuehren."
+MSG_XYZ_DETAILS "XYZ Kal. Details"
+MSG_Y_DISTANCE_FROM_MIN "Y Entfernung vom min"

lang_upgrade/msgs_en.txt

@@ -0,0 +1,373 @@
+MSG_ADJUSTZ c=0 r=0 "Auto adjust Z?"
+MSG_ALL c=19 r=1 "All"
+MSG_AUTO_HOME c=0 r=0 "Auto home"
+MSG_AUTO_MODE_ON c=0 r=0 "Mode [auto power]"
+MSG_AUTOLOAD_FILAMENT c=17 r=0 "AutoLoad filament"
+MSG_AUTOLOADING_ENABLED c=20 r=4 "Autoloading filament is active, just press the knob and insert filament..."
+MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 "Autoloading filament available only when filament sensor is turned on..."
+MSG_BABYSTEP_X c=0 r=0 "Babystep X"
+MSG_BABYSTEP_Y c=0 r=0 "Babystep Y"
+MSG_BABYSTEP_Z c=0 r=0 "Live adjust Z"
+MSG_BABYSTEP_Z_NOT_SET c=20 r=12 "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
+MSG_BABYSTEPPING_X c=0 r=0 "Babystepping X"
+MSG_BABYSTEPPING_Y c=0 r=0 "Babystepping Y"
+MSG_BABYSTEPPING_Z c=20 r=0 "Adjusting Z"
+MSG_BED c=0 r=0 "Bed"
+MSG_BED_CORRECTION_FRONT c=14 r=1 "Front side[um]"
+MSG_BED_CORRECTION_LEFT c=14 r=1 "Left side [um]"
+MSG_BED_CORRECTION_MENU c=0 r=0 "Bed level correct"
+MSG_BED_CORRECTION_REAR c=14 r=1 "Rear side [um]"
+MSG_BED_CORRECTION_RESET c=0 r=0 "Reset"
+MSG_BED_CORRECTION_RIGHT c=14 r=1 "Right side[um]"
+MSG_BED_DONE c=0 r=0 "Bed done"
+MSG_BED_HEATING c=0 r=0 "Bed Heating"
+MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0 "Heating disabled by safety timer."
+MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 "Bed leveling failed. Sensor triggered too high. Waiting for reset."
+MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration failed. Front calibration points not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration failed. Left front calibration point not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration failed. Right front calibration point not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 "XYZ calibration failed. Please consult the manual."
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 "XYZ calibration failed. Bed calibration point was not found."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 "XYZ calibration all right. Skew will be corrected automatically."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration compromised. Front calibration points not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration compromised. Left front calibration point not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration compromised. Right front calibration point not reachable."
+MSG_BEGIN_FILE_LIST c=0 r=0 "Begin file list"
+MSG_CALIBRATE_BED c=0 r=0 "Calibrate XYZ"
+MSG_CALIBRATE_BED_RESET c=0 r=0 "Reset XYZ calibr."
+MSG_CALIBRATE_E c=20 r=1 "Calibrate E"
+MSG_CALIBRATE_PINDA c=17 r=1 "Calibrate"
+MSG_CALIBRATE_Z_AUTO c=20 r=2 "Calibrating Z"
+MSG_CALIBRATION_PINDA_MENU c=17 r=1 "Temp. calibration"
+MSG_CARD_MENU c=0 r=0 "Print from SD"
+MSG_CLEAN_NOZZLE_E c=20 r=8 "E calibration finished. Please clean the nozzle. Click when done."
+MSG_CNG_SDCARD c=0 r=0 "Change SD card"
+MSG_CONFIGURATION_VER c=0 r=0 " Last Updated: "
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 "Are left and right Z~carriages all up?"
+MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 "Please clean the nozzle for calibration. Click when done."
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ c=20 r=8 "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
+MSG_CONTROL c=0 r=0 "Control"
+MSG_COOLDOWN c=0 r=0 "Cooldown"
+MSG_CORRECTLY c=20 r=0 "Changed correctly?"
+MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
+MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
+MSG_CRASH_DETECTED c=20 r=1 "Crash detected."
+MSG_CRASH_DETECTED2 c=20 r=2 "Crash detected. Continue printing?"
+MSG_CRASHDETECT_NA c=0 r=0 "Crash det.  [N/A]"
+MSG_CRASHDETECT_OFF c=0 r=0 "Crash det.  [off]"
+MSG_CRASHDETECT_ON c=0 r=0 "Crash det.   [on]"
+MSG_CURRENT c=19 r=1 "Current"
+MSG_DATE c=17 r=1 "Date:"
+MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 "Old settings found. Default PID, Esteps etc. will be set."
+MSG_DISABLE_STEPPERS c=0 r=0 "Disable steppers"
+MSG_DWELL c=0 r=0 "Sleep..."
+MSG_E_CAL_KNOB c=20 r=8 "Rotate knob until mark reaches extruder body. Click when done."
+MSG_END_FILE_LIST c=0 r=0 "End file list"
+MSG_ENDSTOP_HIT c=0 r=0 "TRIGGERED"
+MSG_ENDSTOP_OPEN c=0 r=0 "open"
+MSG_ENDSTOPS_HIT c=0 r=0 "endstops hit: "
+MSG_Enqueing c=0 r=0 "enqueing \""
+MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0 " cold extrusion prevented"
+MSG_ERR_CHECKSUM_MISMATCH c=0 r=0 "checksum mismatch, Last Line: "
+MSG_ERR_KILLED c=0 r=0 "Printer halted. kill() called!"
+MSG_ERR_NO_CHECKSUM c=0 r=0 "No Checksum with line number, Last Line: "
+MSG_ERR_NO_THERMISTORS c=0 r=0 "No thermistors - no temperature"
+MSG_ERR_STOPPED c=0 r=0 "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+MSG_ERROR c=0 r=0 "ERROR:"
+MSG_EXTRUDER c=17 r=1 "Extruder"
+MSG_EXTRUDER_1 c=17 r=1 "Extruder 1"
+MSG_EXTRUDER_2 c=17 r=1 "Extruder 2"
+MSG_EXTRUDER_3 c=17 r=1 "Extruder 3"
+MSG_EXTRUDER_4 c=17 r=1 "Extruder 4"
+MSG_EXTRUDER_CORRECTION c=9 r=0 "E-correct"
+MSG_EXTRUDER_CORRECTION_OFF c=6 r=0 "  [off"
+MSG_FACTOR c=0 r=0 " \002 Fact"
+MSG_FAN_SPEED c=14 r=0 "Fan speed"
+MSG_FANS_CHECK_OFF c=17 r=1 "Fans check  [off]"
+MSG_FANS_CHECK_ON c=17 r=1 "Fans check   [on]"
+MSG_FIL_ADJUSTING c=20 r=4 "Adjusting filaments. Please wait."
+MSG_FILAMENT_CLEAN c=20 r=2 "Filament extruding & with correct color?"
+MSG_FILAMENT_LOADING_T0 c=20 r=4 "Insert filament into extruder 1. Click when done."
+MSG_FILAMENT_LOADING_T1 c=20 r=4 "Insert filament into extruder 2. Click when done."
+MSG_FILAMENT_LOADING_T2 c=20 r=4 "Insert filament into extruder 3. Click when done."
+MSG_FILAMENT_LOADING_T3 c=20 r=4 "Insert filament into extruder 4. Click when done."
+MSG_FILAMENT_SENSOR c=20 r=0 "Filament sensor"
+MSG_FILAMENTCHANGE c=0 r=0 "Change filament"
+MSG_FILE_CNT c=20 r=4 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
+MSG_FILE_INCOMPLETE c=20 r=2 "File incomplete. Continue anyway?"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0 "Iteration "
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Searching bed calibration point"
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
+MSG_FINISHING_MOVEMENTS c=20 r=1 "Finishing movements"
+MSG_FLOW c=0 r=0 "Flow"
+MSG_FLOW0 c=0 r=0 "Flow 0"
+MSG_FLOW1 c=0 r=0 "Flow 1"
+MSG_FLOW2 c=0 r=0 "Flow 2"
+MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
+MSG_FORCE_SELFTEST c=20 r=8 "Selftest will be run to calibrate accurate sensorless rehoming."
+MSG_FREE_MEMORY c=0 r=0 " Free Memory: "
+MSG_FSENS_AUTOLOAD_NA c=17 r=1 "F. autoload [N/A]"
+MSG_FSENS_AUTOLOAD_OFF c=17 r=1 "F. autoload [off]"
+MSG_FSENS_AUTOLOAD_ON c=17 r=1 "F. autoload  [on]"
+MSG_FSENS_NOT_RESPONDING c=20 r=4 "ERROR: Filament sensor is not responding, please check connection."
+MSG_FSENSOR_NA c=0 r=0 "Fil. sensor [N/A]"
+MSG_FSENSOR_OFF c=0 r=0 "Fil. sensor [off]"
+MSG_FSENSOR_ON c=0 r=0 "Fil. sensor  [on]"
+MSG_FW_VERSION_ALPHA c=20 r=8 "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage." 
+MSG_FW_VERSION_BETA c=20 r=8 "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
+MSG_FW_VERSION_RC c=20 r=8 "This firmware version is release candidate. Some of the features may not work properly."
+MSG_FW_VERSION_UNKNOWN c=20 r=8 "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
+MSG_HEATING c=0 r=0 "Heating"
+MSG_HEATING_COMPLETE c=20 r=0 "Heating done."
+MSG_HOMEYZ c=0 r=0 "Calibrate Z"
+MSG_HOMEYZ_DONE c=0 r=0 "Calibration done"
+MSG_HOMEYZ_PROGRESS c=0 r=0 "Calibrating Z"
+MSG_CHANGE_EXTR c=20 r=1 "Change extruder"
+MSG_CHANGE_SUCCESS c=0 r=0 "Change success!"
+MSG_CHANGED_BOTH c=20 r=4 "Warning: both printer type and motherboard type changed."
+MSG_CHANGED_MOTHERBOARD c=20 r=4 "Warning: motherboard type changed."
+MSG_CHANGED_PRINTER c=20 r=4 "Warning: printer type changed."
+MSG_CHANGING_FILAMENT c=20 r=0 "Changing filament!"
+MSG_CHECK_IDLER c=20 r=4 "Please open idler and remove filament manually."
+MSG_CHOOSE_EXTRUDER c=20 r=1 "Choose extruder:"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Improving bed calibration point"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
+MSG_INFO_EXTRUDER c=15 r=1 "Extruder info"
+MSG_INFO_FILAMENT_XDIFF c=11 r=1 "Fil. Xd:"
+MSG_INFO_FILAMENT_YDIFF c=11 r=1 "Fil. Ydiff:"
+MSG_INFO_NOZZLE_FAN c=11 r=1 "Nozzle FAN:"
+MSG_INFO_PRINT_FAN c=11 r=1 "Print FAN: "
+MSG_INIT_SDCARD c=0 r=0 "Init. SD card"
+MSG_INSERT_FILAMENT c=20 r=0 "Insert filament"
+MSG_KILLED c=0 r=0 "KILLED. "
+MSG_LANGUAGE_NAME c=0 r=0 "English"
+MSG_LANGUAGE_SELECT c=0 r=0 "Select language"
+MSG_LEFT c=12 r=1 "Left:"
+MSG_LOAD_ALL c=0 r=0 "Load all"
+MSG_LOAD_EPROM c=0 r=0 "Load memory"
+MSG_LOAD_FILAMENT c=17 r=0 "Load filament"
+MSG_LOAD_FILAMENT_1 c=17 r=0 "Load filament 1"
+MSG_LOAD_FILAMENT_2 c=17 r=0 "Load filament 2"
+MSG_LOAD_FILAMENT_3 c=17 r=0 "Load filament 3"
+MSG_LOAD_FILAMENT_4 c=17 r=0 "Load filament 4"
+MSG_LOADING_COLOR c=0 r=0 "Loading color"
+MSG_LOADING_FILAMENT c=20 r=0 "Loading filament"
+MSG_LOOSE_PULLEY c=20 r=1 "Loose pulley"
+MSG_M104_INVALID_EXTRUDER c=0 r=0 "M104 Invalid extruder "
+MSG_M105_INVALID_EXTRUDER c=0 r=0 "M105 Invalid extruder "
+MSG_M109_INVALID_EXTRUDER c=0 r=0 "M109 Invalid extruder "
+MSG_M117_V2_CALIBRATION c=25 r=1 "M117 First layer cal."
+MSG_M119_REPORT c=0 r=0 "Reporting endstop status"
+MSG_M200_INVALID_EXTRUDER c=0 r=0 "M200 Invalid extruder "
+MSG_M218_INVALID_EXTRUDER c=0 r=0 "M218 Invalid extruder "
+MSG_M221_INVALID_EXTRUDER c=0 r=0 "M221 Invalid extruder "
+MSG_MAIN c=0 r=0 "Main"
+MSG_MARK_FIL c=20 r=8 "Mark filament 100mm from extruder body. Click when done."
+MSG_MAX c=0 r=0 " \002 Max"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0 "Measuring reference height of calibration point"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0 " of 9"
+MSG_MEASURED_OFFSET c=0 r=0 "[0;0] point offset"
+MSG_MEASURED_SKEW c=15 r=1 "Measured skew:"
+MSG_MENU_BELT_STATUS c=15 r=1 "Belt status"
+MSG_MENU_CALIBRATION c=0 r=0 "Calibration"
+MSG_MENU_TEMPERATURES c=15 r=1 "Temperatures"
+MSG_MENU_VOLTAGES c=15 r=1 "Voltages"
+MSG_MESH_BED_LEVELING c=0 r=0 "Mesh Bed Leveling"
+MSG_MIN c=0 r=0 " \002 Min"
+MSG_MOTION c=0 r=0 "Motion"
+MSG_MOVE_AXIS c=0 r=0 "Move axis"
+MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+MSG_MOVE_E c=0 r=0 "Extruder"
+MSG_MOVE_X c=0 r=0 "Move X"
+MSG_MOVE_Y c=0 r=0 "Move Y"
+MSG_MOVE_Z c=0 r=0 "Move Z"
+MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 "New firmware version available:"
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0 "Please upgrade."
+MSG_NO c=0 r=0 "No"
+MSG_NO_CARD c=0 r=0 "No SD card"
+MSG_NO_MOVE c=0 r=0 "No move."
+MSG_NOT_COLOR c=0 r=0 "Color not correct"
+MSG_NOT_LOADED c=19 r=0 "Filament not loaded"
+MSG_NOZZLE c=0 r=0 "Nozzle"
+MSG_NOZZLE1 c=0 r=0 "Nozzle2"
+MSG_NOZZLE2 c=0 r=0 "Nozzle3"
+MSG_OK c=0 r=0 "ok"
+MSG_PAPER c=20 r=8 "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
+MSG_PAUSE_PRINT c=0 r=0 "Pause print"
+MSG_PICK_Z c=0 r=0 "Pick print"
+MSG_PID_EXTRUDER c=17 r=1 "PID calibration"
+MSG_PID_FINISHED c=20 r=1 "PID cal. finished"
+MSG_PID_RUNNING c=20 r=1 "PID cal.           "
+MSG_PINDA_NOT_CALIBRATED c=20 r=4 "Temperature calibration has not been run yet"
+MSG_PINDA_PREHEAT c=20 r=1 "PINDA Heating"
+MSG_PLA_FILAMENT_LOADED c=20 r=2 "Is PLA filament loaded?"
+MSG_PLACE_STEEL_SHEET c=20 r=4 "Please place steel sheet on heatbed."
+MSG_PLANNER_BUFFER_BYTES c=0 r=0 "  PlannerBufferBytes: "
+MSG_PLEASE_LOAD_PLA c=20 r=4 "Please load PLA filament first."
+MSG_PLEASE_WAIT c=20 r=0 "Please wait"
+MSG_POWERUP c=0 r=0 "PowerUp"
+MSG_PREHEAT c=0 r=0 "Preheat"
+MSG_PREHEAT_NOZZLE c=20 r=0 "Preheat the nozzle!"
+MSG_PREPARE_FILAMENT c=20 r=1 "Prepare new filament"
+MSG_PRESS c=20 r=0 "and press the knob"
+MSG_PRESS_TO_PREHEAT c=20 r=4 "Press knob to preheat nozzle and continue."
+MSG_PRESS_TO_UNLOAD c=20 r=4 "Please press the knob to unload filament"
+MSG_PRINT_ABORTED c=20 r=0 "Print aborted"
+MSG_PRINT_PAUSED c=20 r=1 "Print paused"
+MSG_PRINTER_DISCONNECTED c=20 r=1 "Printer disconnected"
+MSG_PRUSA3D c=0 r=0 "prusa3d.com"
+MSG_PRUSA3D_FORUM c=0 r=0 "forum.prusa3d.com"
+MSG_PRUSA3D_HOWTO c=0 r=0 "howto.prusa3d.com"
+MSG_PULL_OUT_FILAMENT c=20 r=4 "Please pull out filament immediately"
+MSG_REBOOT c=20 r=0 "Reboot the printer"
+MSG_RECOVER_PRINT c=20 r=2 "Blackout occurred. Recover print?"
+MSG_RECOVERING_PRINT c=20 r=1 "Recovering print    "
+MSG_RECTRACT c=0 r=0 "Rectract"
+MSG_REFRESH c=0 r=0 "\xF8" "Refresh"
+MSG_REMOVE_STEEL_SHEET c=20 r=4 "Please remove steel sheet from heatbed."
+MSG_RESEND c=0 r=0 "Resend: "
+MSG_RESTORE_FAILSAFE c=0 r=0 "Restore failsafe"
+MSG_RESUME_PRINT c=0 r=0 "Resume print"
+MSG_RESUMING c=0 r=0 "Resuming print"
+MSG_RESUMING_PRINT c=20 r=1 "Resuming print"
+MSG_RIGHT c=12 r=1 "Right:"
+MSG_SD_CANT_ENTER_SUBDIR c=0 r=0 "Cannot enter subdir: "
+MSG_SD_CANT_OPEN_SUBDIR c=0 r=0 "Cannot open subdir"
+MSG_SD_CARD_OK c=0 r=0 "SD card ok"
+MSG_SD_ERR_WRITE_TO_FILE c=0 r=0 "error writing to file"
+MSG_SD_FILE_OPENED c=0 r=0 "File opened: "
+MSG_SD_FILE_SELECTED c=0 r=0 "File selected"
+MSG_SD_INIT_FAIL c=0 r=0 "SD init fail"
+MSG_SD_INSERTED c=0 r=0 "Card inserted"
+MSG_SD_NOT_PRINTING c=0 r=0 "Not SD printing"
+MSG_SD_OPEN_FILE_FAIL c=0 r=0 "open failed, File: "
+MSG_SD_OPENROOT_FAIL c=0 r=0 "openRoot failed"
+MSG_SD_PRINTING_BYTE c=0 r=0 "SD printing byte "
+MSG_SD_REMOVED c=0 r=0 "Card removed"
+MSG_SD_VOL_INIT_FAIL c=0 r=0 "volume.init failed"
+MSG_SD_WORKDIR_FAIL c=0 r=0 "workDir open failed"
+MSG_SD_WRITE_TO_FILE c=0 r=0 "Writing to file: "
+MSG_SECOND_SERIAL_OFF c=17 r=1 "RPi port    [off]"
+MSG_SECOND_SERIAL_ON c=17 r=1 "RPi port     [on]"
+MSG_SELFTEST c=0 r=0 "Selftest         "
+MSG_SELFTEST_AXIS c=0 r=0 "Axis"
+MSG_SELFTEST_AXIS_LENGTH c=0 r=0 "Axis length"
+MSG_SELFTEST_BEDHEATER c=0 r=0 "Bed / Heater"
+MSG_SELFTEST_COOLING_FAN c=20 r=0 "Front print fan?"
+MSG_SELFTEST_ENDSTOP c=0 r=0 "Endstop"
+MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 "Endstop not hit"
+MSG_SELFTEST_ENDSTOPS c=0 r=0 "Endstops"
+MSG_SELFTEST_ERROR c=0 r=0 "Selftest error !"
+MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 "Left hotend fan?"
+MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0 "Extruder fan:"
+MSG_SELFTEST_FAILED c=20 r=0 "Selftest failed  "
+MSG_SELFTEST_FAN c=20 r=0 "Fan test"
+MSG_SELFTEST_FAN_NO c=19 r=0 "Not spinning"
+MSG_SELFTEST_FAN_YES c=19 r=0 "Spinning"
+MSG_SELFTEST_FANS c=0 r=0 "Front/left fans"
+MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0 "Filament sensor:"
+MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0 "Heater/Thermistor"
+MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0 "All correct      "
+MSG_SELFTEST_CHECK_BED c=20 r=0 "Checking bed     "
+MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0 "Checking endstops"
+MSG_SELFTEST_CHECK_FSENSOR c=20 r=0 "Checking sensors "
+MSG_SELFTEST_CHECK_HOTEND c=20 r=0 "Checking hotend  "  
+MSG_SELFTEST_CHECK_X c=20 r=0 "Checking X axis  "
+MSG_SELFTEST_CHECK_Y c=20 r=0 "Checking Y axis  "
+MSG_SELFTEST_CHECK_Z c=20 r=0 "Checking Z axis  "
+MSG_SELFTEST_MOTOR c=0 r=0 "Motor"
+MSG_SELFTEST_NOTCONNECTED c=0 r=0 "Not connected"
+MSG_SELFTEST_OK c=0 r=0 "Self test OK"
+MSG_SELFTEST_PLEASECHECK c=0 r=0 "Please check :"	
+MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 "Print fan:"
+MSG_SELFTEST_START c=20 r=0 "Self test start  "
+MSG_SELFTEST_SWAPPED c=0 r=0 "Swapped"
+MSG_SELFTEST_WIRINGERROR c=0 r=0 "Wiring error"
+MSG_SERIAL_ERROR_MENU_STRUCTURE c=0 r=0 "Error in menu structure"
+MSG_SET_HOME_OFFSETS c=0 r=0 "Set home offsets"
+MSG_SET_ORIGIN c=0 r=0 "Set origin"
+MSG_SET_TEMPERATURE c=19 r=1 "Set temperature:"
+MSG_SETTINGS c=0 r=0 "Settings"
+MSG_SEVERE_SKEW c=15 r=1 "Severe skew:"
+MSG_SHOW_END_STOPS c=17 r=1 "Show end stops"
+MSG_SILENT_MODE_OFF c=0 r=0 "Mode [high power]" 
+MSG_SILENT_MODE_ON c=0 r=0 "Mode     [silent]"
+MSG_SLIGHT_SKEW c=15 r=1 "Slight skew:"
+MSG_SORT_ALPHA c=17 r=1 "Sort:  [Alphabet]"
+MSG_SORT_NONE c=17 r=1 "Sort:      [None]"
+MSG_SORT_TIME c=17 r=1 "Sort:      [Time]"
+MSG_SORTING c=20 r=1 "Sorting files"
+MSG_SPEED c=0 r=0 "Speed"
+MSG_STACK_ERROR c=20 r=4 "Error - static memory has been overwritten"
+MSG_STATISTICS c=0 r=0 "Statistics  "
+MSG_STATS_FILAMENTUSED c=20 r=0 "Filament used:  "
+MSG_STATS_PRINTTIME c=20 r=0 "Print time:  "
+MSG_STATS_TOTALFILAMENT c=20 r=0 "Total filament :"
+MSG_STATS_TOTALPRINTTIME c=20 r=0 "Total print time :"
+MSG_STEALTH_MODE_OFF c=0 r=0 "Mode     [Normal]"
+MSG_STEALTH_MODE_ON c=0 r=0 "Mode    [Stealth]"
+MSG_STEEL_SHEET_CHECK c=20 r=2 "Is steel sheet on heatbed?"
+MSG_STEPPER_TIMER_OVERFLOW_ERROR c=20 r=4 "Error - stepper timer overflow"
+MSG_STEPPER_TOO_HIGH c=0 r=0 "Steprate too high: "
+MSG_STOP_PRINT c=0 r=0 "Stop print"
+MSG_STOPPED c=0 r=0 "STOPPED. "
+MSG_STORE_EPROM c=0 r=0 "Store memory"
+MSG_SUPPORT c=0 r=0 "Support"
+MSG_SWITCH_PS_OFF c=0 r=0 "Switch power off"
+MSG_SWITCH_PS_ON c=0 r=0 "Switch power on"
+MSG_TAKE_EFFECT c=20 r=0 " for take effect"											
+MSG_TEMP_CAL_FAILED c=20 r=8 "Temperature calibration failed"
+MSG_TEMP_CAL_WARNING c=20 r=4 "Stable ambient temperature 21-26C is needed a rigid stand is required."
+MSG_TEMP_CALIBRATION c=20 r=1 "Temp. cal.          "
+MSG_TEMP_CALIBRATION_DONE c=20 r=12 "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
+MSG_TEMP_CALIBRATION_OFF c=20 r=1 "Temp. cal.  [off]"
+MSG_TEMP_CALIBRATION_ON c=20 r=1 "Temp. cal.   [on]"
+MSG_TEMPERATURE c=0 r=0 "Temperature"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 "SD card  [normal]"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 "SD card [FlshAir]"
+MSG_TUNE c=0 r=0 "Tune"
+MSG_UNLOAD_ALL c=0 r=0 "Unload all"
+MSG_UNLOAD_FILAMENT c=17 r=0 "Unload filament"
+MSG_UNLOAD_FILAMENT_1 c=17 r=0 "Unload filament 1"
+MSG_UNLOAD_FILAMENT_2 c=17 r=0 "Unload filament 2"
+MSG_UNLOAD_FILAMENT_3 c=17 r=0 "Unload filament 3"
+MSG_UNLOAD_FILAMENT_4 c=17 r=0 "Unload filament 4"
+MSG_UNLOAD_SUCCESSFUL c=20 r=2 "Was filament unload successful?"
+MSG_UNLOADING_FILAMENT c=20 r=1 "Unloading filament"
+MSG_USB_PRINTING c=0 r=0 "USB printing  "
+MSG_USED c=19 r=1 "Used during print"
+MSG_USERWAIT c=0 r=0 "Wait for user..."
+MSG_V2_CALIBRATION c=17 r=1 "First layer cal."
+MSG_VOLUMETRIC c=0 r=0 "Filament"
+MSG_VOLUMETRIC_ENABLED c=0 r=0 "E in mm3"
+MSG_WAITING_TEMP c=20 r=3 "Waiting for nozzle and bed cooling"
+MSG_WAITING_TEMP_PINDA c=20 r=3 "Waiting for PINDA probe cooling"
+MSG_WATCH c=0 r=0 "Info screen"
+MSG_WIZARD c=17 r=1 "Wizard"
+MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
+MSG_WIZARD_CLEAN_HEATBED c=20 r=8 "Please clean heatbed and then press the knob."
+MSG_WIZARD_DONE c=20 r=8 "All is done. Happy printing!"
+MSG_WIZARD_FILAMENT_LOADED c=20 r=2 "Is filament loaded?"
+MSG_WIZARD_HEATING c=20 r=3 "Preheating nozzle. Please wait."
+MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8 "Please load PLA filament and then resume Wizard by rebooting the printer."
+MSG_WIZARD_LOAD_FILAMENT c=20 r=8 "Please insert PLA filament to the extruder, then press knob to load it."
+MSG_WIZARD_PLA_FILAMENT c=20 r=2 "Is it PLA filament?"
+MSG_WIZARD_QUIT c=20 r=8 "You can always resume the Wizard from Calibration -> Wizard."
+MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
+MSG_WIZARD_RERUN c=20 r=7 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
+MSG_WIZARD_SELFTEST c=20 r=8 "First, I will run the selftest to check most common assembly problems."
+MSG_WIZARD_V2_CAL c=20 r=8 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
+MSG_WIZARD_V2_CAL_2 c=20 r=12 "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
+MSG_WIZARD_WELCOME c=20 r=7 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
+MSG_WIZARD_WILL_PREHEAT c=20 r=4 "Now I will preheat nozzle for PLA."
+MSG_WIZARD_XYZ_CAL c=20 r=8 "I will run xyz calibration now. It will take approx. 12 mins."
+MSG_WIZARD_Z_CAL c=20 r=8 "I will run z calibration now."
+MSG_XYZ_DETAILS c=19 r=1 "XYZ cal. details"
+MSG_Y_DISTANCE_FROM_MIN c=20 r=1 "Y distance from min:"
+MSG_YES c=0 r=0 "Yes"
+WELCOME_MSG c=20 r=0 CUSTOM_MENDEL_NAME " ready."

lang_upgrade/msgs_en_unused.txt

@@ -0,0 +1,30 @@
+MSG_BABYSTEP_X c=0 r=0 "Babystep X"
+MSG_BABYSTEP_Y c=0 r=0 "Babystep Y"
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ c=20 r=8 "Filaments are now adjusted. Please clean the nozzle for calibration. Click when done."
+MSG_CONTROL c=0 r=0 "Control"
+MSG_CRASH_DETECTED2 c=20 r=2 "Crash detected. Continue printing?"
+MSG_FIL_ADJUSTING c=20 r=4 "Adjusting filaments. Please wait."
+MSG_FLOW0 c=0 r=0 "Flow 0"
+MSG_FLOW1 c=0 r=0 "Flow 1"
+MSG_FLOW2 c=0 r=0 "Flow 2"
+MSG_FW_VERSION_RC c=20 r=8 "This firmware version is release candidate. Some of the features may not work properly."
+MSG_INFO_FILAMENT_XDIFF c=11 r=1 "Fil. Xd:"
+MSG_INFO_FILAMENT_YDIFF c=11 r=1 "Fil. Ydiff:"
+MSG_LANGUAGE_NAME c=0 r=0 "English"
+MSG_LOAD_EPROM c=0 r=0 "Load memory"
+MSG_MOTION c=0 r=0 "Motion"
+MSG_REBOOT c=20 r=0 "Reboot the printer"
+MSG_RECTRACT c=0 r=0 "Rectract"
+MSG_RESTORE_FAILSAFE c=0 r=0 "Restore failsafe"
+MSG_SD_NOT_PRINTING c=0 r=0 "Not SD printing"
+MSG_SERIAL_ERROR_MENU_STRUCTURE c=0 r=0 "Error in menu structure"
+MSG_SET_HOME_OFFSETS c=0 r=0 "Set home offsets"
+MSG_SET_ORIGIN c=0 r=0 "Set origin"
+MSG_STEPPER_TIMER_OVERFLOW_ERROR c=20 r=4 "Error - stepper timer overflow"
+MSG_STORE_EPROM c=0 r=0 "Store memory"
+MSG_SWITCH_PS_OFF c=0 r=0 "Switch power off"
+MSG_SWITCH_PS_ON c=0 r=0 "Switch power on"
+MSG_TAKE_EFFECT c=20 r=0 " for take effect"											
+MSG_USB_PRINTING c=0 r=0 "USB printing  "
+MSG_VOLUMETRIC c=0 r=0 "Filament"
+MSG_VOLUMETRIC_ENABLED c=0 r=0 "E in mm3"

lang_upgrade/msgs_en_used_more.txt

@@ -0,0 +1,96 @@
+MSG_ALL c=19 r=1 "All"
+MSG_AUTO_HOME c=0 r=0 "Auto home"
+MSG_AUTO_MODE_ON c=0 r=0 "Mode [auto power]"
+MSG_BABYSTEP_Z c=0 r=0 "Live adjust Z"
+MSG_BABYSTEP_Z_NOT_SET c=20 r=12 "Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."
+MSG_BED c=0 r=0 "Bed"
+MSG_BED_DONE c=0 r=0 "Bed done"
+MSG_BED_HEATING c=0 r=0 "Bed Heating"
+MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=4 "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8 "XYZ calibration failed. Please consult the manual."
+MSG_CALIBRATE_Z_AUTO c=20 r=2 "Calibrating Z"
+MSG_CARD_MENU c=0 r=0 "Print from SD"
+MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8 "Please clean the nozzle for calibration. Click when done."
+MSG_COOLDOWN c=0 r=0 "Cooldown"
+MSG_CRASH_DETECTED c=20 r=1 "Crash detected."
+MSG_CRASHDETECT_NA c=0 r=0 "Crash det.  [N/A]"
+MSG_CRASHDETECT_OFF c=0 r=0 "Crash det.  [off]"
+MSG_CRASHDETECT_ON c=0 r=0 "Crash det.   [on]"
+MSG_ENDSTOP_HIT c=0 r=0 "TRIGGERED"
+MSG_ENDSTOP_OPEN c=0 r=0 "open"
+MSG_ENDSTOPS_HIT c=0 r=0 "endstops hit: "
+MSG_Enqueing c=0 r=0 "enqueing \""
+MSG_ERR_STOPPED c=0 r=0 "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+MSG_ERROR c=0 r=0 "ERROR:"
+MSG_EXTRUDER c=17 r=1 "Extruder"
+MSG_FAN_SPEED c=14 r=0 "Fan speed"
+MSG_FILAMENT_CLEAN c=20 r=2 "Filament extruding & with correct color?"
+MSG_FILAMENT_LOADING_T0 c=20 r=4 "Insert filament into extruder 1. Click when done."
+MSG_FILAMENT_LOADING_T1 c=20 r=4 "Insert filament into extruder 2. Click when done."
+MSG_FILAMENT_LOADING_T2 c=20 r=4 "Insert filament into extruder 3. Click when done."
+MSG_FILAMENT_LOADING_T3 c=20 r=4 "Insert filament into extruder 4. Click when done."
+MSG_FILAMENTCHANGE c=0 r=0 "Change filament"
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Searching bed calibration point"
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
+MSG_FINISHING_MOVEMENTS c=20 r=1 "Finishing movements"
+MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8 "Printer has not been calibrated yet. Please follow the manual, chapter First steps, section Calibration flow."
+MSG_FSENS_AUTOLOAD_NA c=17 r=1 "F. autoload [N/A]"
+MSG_FSENSOR_OFF c=0 r=0 "Fil. sensor [off]"
+MSG_FSENSOR_ON c=0 r=0 "Fil. sensor  [on]"
+MSG_HEATING c=0 r=0 "Heating"
+MSG_HEATING_COMPLETE c=20 r=0 "Heating done."
+MSG_HOMEYZ c=0 r=0 "Calibrate Z"
+MSG_CHOOSE_EXTRUDER c=20 r=1 "Choose extruder:"
+MSG_LOAD_FILAMENT c=17 r=0 "Load filament"
+MSG_LOADING_FILAMENT c=20 r=0 "Loading filament"
+MSG_M117_V2_CALIBRATION c=25 r=1 "M117 First layer cal."
+MSG_MAIN c=0 r=0 "Main"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=60 r=0 "Measuring reference height of calibration point"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 c=14 r=0 " of 9"
+MSG_MENU_CALIBRATION c=0 r=0 "Calibration"
+MSG_NO c=0 r=0 "No"
+MSG_NOZZLE c=0 r=0 "Nozzle"
+MSG_OK c=0 r=0 "ok"
+MSG_PAPER c=20 r=8 "Place a sheet of paper under the nozzle during the calibration of first 4 points. If the nozzle catches the paper, power off the printer immediately."
+MSG_PLACE_STEEL_SHEET c=20 r=4 "Please place steel sheet on heatbed."
+MSG_PLEASE_WAIT c=20 r=0 "Please wait"
+MSG_POWERUP c=0 r=0 "PowerUp"
+MSG_PREHEAT_NOZZLE c=20 r=0 "Preheat the nozzle!"
+MSG_PRESS_TO_UNLOAD c=20 r=4 "Please press the knob to unload filament"
+MSG_PRINT_ABORTED c=20 r=0 "Print aborted"
+MSG_PULL_OUT_FILAMENT c=20 r=4 "Please pull out filament immediately"
+MSG_RECOVER_PRINT c=20 r=2 "Blackout occurred. Recover print?"
+MSG_REFRESH c=0 r=0 "\xF8" "Refresh"
+MSG_REMOVE_STEEL_SHEET c=20 r=4 "Please remove steel sheet from heatbed."
+MSG_SD_ERR_WRITE_TO_FILE c=0 r=0 "error writing to file"
+MSG_SD_OPEN_FILE_FAIL c=0 r=0 "open failed, File: "
+MSG_SD_WORKDIR_FAIL c=0 r=0 "workDir open failed"
+MSG_SELFTEST_COOLING_FAN c=20 r=0 "Front print fan?"
+MSG_SELFTEST_EXTRUDER_FAN c=20 r=0 "Left hotend fan?"
+MSG_SELFTEST_FAILED c=20 r=0 "Selftest failed  "
+MSG_SELFTEST_FAN c=20 r=0 "Fan test"
+MSG_SELFTEST_FAN_NO c=19 r=0 "Not spinning"
+MSG_SELFTEST_FAN_YES c=19 r=0 "Spinning"
+MSG_SELFTEST_CHECK_BED c=20 r=0 "Checking bed     "
+MSG_SELFTEST_CHECK_FSENSOR c=20 r=0 "Checking sensors "
+MSG_SELFTEST_MOTOR c=0 r=0 "Motor"
+MSG_SELFTEST_WIRINGERROR c=0 r=0 "Wiring error"
+MSG_SETTINGS c=0 r=0 "Settings"
+MSG_SILENT_MODE_OFF c=0 r=0 "Mode [high power]" 
+MSG_SILENT_MODE_ON c=0 r=0 "Mode     [silent]"
+MSG_STEALTH_MODE_OFF c=0 r=0 "Mode     [Normal]"
+MSG_STEALTH_MODE_ON c=0 r=0 "Mode    [Stealth]"
+MSG_STEEL_SHEET_CHECK c=20 r=2 "Is steel sheet on heatbed?"
+MSG_STOP_PRINT c=0 r=0 "Stop print"
+MSG_STOPPED c=0 r=0 "STOPPED. "
+MSG_TEMP_CALIBRATION c=20 r=1 "Temp. cal.          "
+MSG_TEMP_CALIBRATION_DONE c=20 r=12 "Temperature calibration is finished and active. Temp. calibration can be disabled in menu Settings->Temp. cal."
+MSG_UNLOAD_FILAMENT c=17 r=0 "Unload filament"
+MSG_UNLOADING_FILAMENT c=20 r=1 "Unloading filament"
+MSG_WATCH c=0 r=0 "Info screen"
+MSG_WIZARD_CALIBRATION_FAILED c=20 r=8 "Please check our handbook and fix the problem. Then resume the Wizard by rebooting the printer."
+MSG_WIZARD_DONE c=20 r=8 "All is done. Happy printing!"
+MSG_WIZARD_HEATING c=20 r=3 "Preheating nozzle. Please wait."
+MSG_WIZARD_QUIT c=20 r=8 "You can always resume the Wizard from Calibration -> Wizard."
+MSG_YES c=0 r=0 "Yes"
+WELCOME_MSG c=20 r=0 CUSTOM_MENDEL_NAME " ready."

lang_upgrade/msgs_en_used_once.txt

@@ -0,0 +1,247 @@
+MSG_ADJUSTZ c=0 r=0 "Auto adjust Z?"
+MSG_AUTOLOAD_FILAMENT c=17 r=0 "AutoLoad filament"
+MSG_AUTOLOADING_ENABLED c=20 r=4 "Autoloading filament is active, just press the knob and insert filament..."
+MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 "Autoloading filament available only when filament sensor is turned on..."
+MSG_BABYSTEPPING_X c=0 r=0 "Babystepping X"
+MSG_BABYSTEPPING_Y c=0 r=0 "Babystepping Y"
+MSG_BABYSTEPPING_Z c=20 r=0 "Adjusting Z"
+MSG_BED_CORRECTION_FRONT c=14 r=1 "Front side[um]"
+MSG_BED_CORRECTION_LEFT c=14 r=1 "Left side [um]"
+MSG_BED_CORRECTION_MENU c=0 r=0 "Bed level correct"
+MSG_BED_CORRECTION_REAR c=14 r=1 "Rear side [um]"
+MSG_BED_CORRECTION_RESET c=0 r=0 "Reset"
+MSG_BED_CORRECTION_RIGHT c=14 r=1 "Right side[um]"
+MSG_BED_HEATING_SAFETY_DISABLED c=0 r=0 "Heating disabled by safety timer."
+MSG_BED_LEVELING_FAILED_POINT_HIGH c=20 r=4 "Bed leveling failed. Sensor triggered too high. Waiting for reset."
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED c=20 r=4 "Bed leveling failed. Sensor disconnected or cable broken. Waiting for reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration failed. Front calibration points not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration failed. Left front calibration point not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration failed. Right front calibration point not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 "XYZ calibration failed. Bed calibration point was not found."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 "XYZ calibration all right. Skew will be corrected automatically."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 "XYZ calibration compromised. Front calibration points not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 "XYZ calibration compromised. Left front calibration point not reachable."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 "XYZ calibration compromised. Right front calibration point not reachable."
+MSG_BEGIN_FILE_LIST c=0 r=0 "Begin file list"
+MSG_CALIBRATE_BED c=0 r=0 "Calibrate XYZ"
+MSG_CALIBRATE_BED_RESET c=0 r=0 "Reset XYZ calibr."
+MSG_CALIBRATE_E c=20 r=1 "Calibrate E"
+MSG_CALIBRATE_PINDA c=17 r=1 "Calibrate"
+MSG_CALIBRATION_PINDA_MENU c=17 r=1 "Temp. calibration"
+MSG_CLEAN_NOZZLE_E c=20 r=8 "E calibration finished. Please clean the nozzle. Click when done."
+MSG_CNG_SDCARD c=0 r=0 "Change SD card"
+MSG_CONFIGURATION_VER c=0 r=0 " Last Updated: "
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 "Are left and right Z~carriages all up?"
+MSG_CORRECTLY c=20 r=0 "Changed correctly?"
+MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 "\x1b[2JCrash detection can\x1b[1;0Hbe turned on only in\x1b[2;0HNormal mode"
+MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 "\x1b[2JWARNING:\x1b[1;0HCrash detection\x1b[2;0Hdisabled in\x1b[3;0HStealth mode"
+MSG_CURRENT c=19 r=1 "Current"
+MSG_DATE c=17 r=1 "Date:"
+MSG_DEFAULT_SETTINGS_LOADED c=20 r=4 "Old settings found. Default PID, Esteps etc. will be set."
+MSG_DISABLE_STEPPERS c=0 r=0 "Disable steppers"
+MSG_DWELL c=0 r=0 "Sleep..."
+MSG_E_CAL_KNOB c=20 r=8 "Rotate knob until mark reaches extruder body. Click when done."
+MSG_END_FILE_LIST c=0 r=0 "End file list"
+MSG_ERR_COLD_EXTRUDE_STOP c=0 r=0 " cold extrusion prevented"
+MSG_ERR_CHECKSUM_MISMATCH c=0 r=0 "checksum mismatch, Last Line: "
+MSG_ERR_KILLED c=0 r=0 "Printer halted. kill() called!"
+MSG_ERR_NO_CHECKSUM c=0 r=0 "No Checksum with line number, Last Line: "
+MSG_ERR_NO_THERMISTORS c=0 r=0 "No thermistors - no temperature"
+MSG_EXTRUDER_1 c=17 r=1 "Extruder 1"
+MSG_EXTRUDER_2 c=17 r=1 "Extruder 2"
+MSG_EXTRUDER_3 c=17 r=1 "Extruder 3"
+MSG_EXTRUDER_4 c=17 r=1 "Extruder 4"
+MSG_EXTRUDER_CORRECTION c=9 r=0 "E-correct"
+MSG_EXTRUDER_CORRECTION_OFF c=6 r=0 "  [off"
+MSG_FACTOR c=0 r=0 " \002 Fact"
+MSG_FANS_CHECK_OFF c=17 r=1 "Fans check  [off]"
+MSG_FANS_CHECK_ON c=17 r=1 "Fans check   [on]"
+MSG_FILAMENT_SENSOR c=20 r=0 "Filament sensor"
+MSG_FILE_CNT c=20 r=4 "Some files will not be sorted. Max. No. of files in 1 folder for sorting is 100."
+MSG_FILE_INCOMPLETE c=20 r=2 "File incomplete. Continue anyway?"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION c=20 r=0 "Iteration "
+MSG_FLOW c=0 r=0 "Flow"
+MSG_FORCE_SELFTEST c=20 r=8 "Selftest will be run to calibrate accurate sensorless rehoming."
+MSG_FREE_MEMORY c=0 r=0 " Free Memory: "
+MSG_FSENS_AUTOLOAD_OFF c=17 r=1 "F. autoload [off]"
+MSG_FSENS_AUTOLOAD_ON c=17 r=1 "F. autoload  [on]"
+MSG_FSENS_NOT_RESPONDING c=20 r=4 "ERROR: Filament sensor is not responding, please check connection."
+MSG_FSENSOR_NA c=0 r=0 "Fil. sensor [N/A]"
+MSG_FW_VERSION_ALPHA c=20 r=8 "You are using firmware alpha version. This is development version. Using this version is not recommended and may cause printer damage." 
+MSG_FW_VERSION_BETA c=20 r=8 "You are using firmware beta version. This is development version. Using this version is not recommended and may cause printer damage."
+MSG_FW_VERSION_UNKNOWN c=20 r=8 "WARNING: This is an unofficial, unsupported build. Use at your own risk!"
+MSG_HOMEYZ_DONE c=0 r=0 "Calibration done"
+MSG_HOMEYZ_PROGRESS c=0 r=0 "Calibrating Z"
+MSG_CHANGE_EXTR c=20 r=1 "Change extruder"
+MSG_CHANGE_SUCCESS c=0 r=0 "Change success!"
+MSG_CHANGED_BOTH c=20 r=4 "Warning: both printer type and motherboard type changed."
+MSG_CHANGED_MOTHERBOARD c=20 r=4 "Warning: motherboard type changed."
+MSG_CHANGED_PRINTER c=20 r=4 "Warning: printer type changed."
+MSG_CHANGING_FILAMENT c=20 r=0 "Changing filament!"
+MSG_CHECK_IDLER c=20 r=4 "Please open idler and remove filament manually."
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60 r=0 "Improving bed calibration point"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 c=14 r=0 " of 4"
+MSG_INFO_EXTRUDER c=15 r=1 "Extruder info"
+MSG_INFO_NOZZLE_FAN c=11 r=1 "Nozzle FAN:"
+MSG_INFO_PRINT_FAN c=11 r=1 "Print FAN: "
+MSG_INIT_SDCARD c=0 r=0 "Init. SD card"
+MSG_INSERT_FILAMENT c=20 r=0 "Insert filament"
+MSG_KILLED c=0 r=0 "KILLED. "
+MSG_LANGUAGE_SELECT c=0 r=0 "Select language"
+MSG_LEFT c=12 r=1 "Left:"
+MSG_LOAD_ALL c=0 r=0 "Load all"
+MSG_LOAD_FILAMENT_1 c=17 r=0 "Load filament 1"
+MSG_LOAD_FILAMENT_2 c=17 r=0 "Load filament 2"
+MSG_LOAD_FILAMENT_3 c=17 r=0 "Load filament 3"
+MSG_LOAD_FILAMENT_4 c=17 r=0 "Load filament 4"
+MSG_LOADING_COLOR c=0 r=0 "Loading color"
+MSG_LOOSE_PULLEY c=20 r=1 "Loose pulley"
+MSG_M104_INVALID_EXTRUDER c=0 r=0 "M104 Invalid extruder "
+MSG_M105_INVALID_EXTRUDER c=0 r=0 "M105 Invalid extruder "
+MSG_M109_INVALID_EXTRUDER c=0 r=0 "M109 Invalid extruder "
+MSG_M119_REPORT c=0 r=0 "Reporting endstop status"
+MSG_M200_INVALID_EXTRUDER c=0 r=0 "M200 Invalid extruder "
+MSG_M218_INVALID_EXTRUDER c=0 r=0 "M218 Invalid extruder "
+MSG_M221_INVALID_EXTRUDER c=0 r=0 "M221 Invalid extruder "
+MSG_MARK_FIL c=20 r=8 "Mark filament 100mm from extruder body. Click when done."
+MSG_MAX c=0 r=0 " \002 Max"
+MSG_MEASURED_OFFSET c=0 r=0 "[0;0] point offset"
+MSG_MEASURED_SKEW c=15 r=1 "Measured skew:"
+MSG_MENU_BELT_STATUS c=15 r=1 "Belt status"
+MSG_MENU_TEMPERATURES c=15 r=1 "Temperatures"
+MSG_MENU_VOLTAGES c=15 r=1 "Voltages"
+MSG_MESH_BED_LEVELING c=0 r=0 "Mesh Bed Leveling"
+MSG_MIN c=0 r=0 " \002 Min"
+MSG_MOVE_AXIS c=0 r=0 "Move axis"
+MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8 "Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 "Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done."
+MSG_MOVE_E c=0 r=0 "Extruder"
+MSG_MOVE_X c=0 r=0 "Move X"
+MSG_MOVE_Y c=0 r=0 "Move Y"
+MSG_MOVE_Z c=0 r=0 "Move Z"
+MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2 "New firmware version available:"
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20 r=0 "Please upgrade."
+MSG_NO_CARD c=0 r=0 "No SD card"
+MSG_NO_MOVE c=0 r=0 "No move."
+MSG_NOT_COLOR c=0 r=0 "Color not correct"
+MSG_NOT_LOADED c=19 r=0 "Filament not loaded"
+MSG_NOZZLE1 c=0 r=0 "Nozzle2"
+MSG_NOZZLE2 c=0 r=0 "Nozzle3"
+MSG_PAUSE_PRINT c=0 r=0 "Pause print"
+MSG_PICK_Z c=0 r=0 "Pick print"
+MSG_PID_EXTRUDER c=17 r=1 "PID calibration"
+MSG_PID_FINISHED c=20 r=1 "PID cal. finished"
+MSG_PID_RUNNING c=20 r=1 "PID cal.           "
+MSG_PINDA_NOT_CALIBRATED c=20 r=4 "Temperature calibration has not been run yet"
+MSG_PINDA_PREHEAT c=20 r=1 "PINDA Heating"
+MSG_PLA_FILAMENT_LOADED c=20 r=2 "Is PLA filament loaded?"
+MSG_PLANNER_BUFFER_BYTES c=0 r=0 "  PlannerBufferBytes: "
+MSG_PLEASE_LOAD_PLA c=20 r=4 "Please load PLA filament first."
+MSG_PREHEAT c=0 r=0 "Preheat"
+MSG_PREPARE_FILAMENT c=20 r=1 "Prepare new filament"
+MSG_PRESS c=20 r=0 "and press the knob"
+MSG_PRESS_TO_PREHEAT c=20 r=4 "Press knob to preheat nozzle and continue."
+MSG_PRINT_PAUSED c=20 r=1 "Print paused"
+MSG_PRINTER_DISCONNECTED c=20 r=1 "Printer disconnected"
+MSG_PRUSA3D c=0 r=0 "prusa3d.com"
+MSG_PRUSA3D_FORUM c=0 r=0 "forum.prusa3d.com"
+MSG_PRUSA3D_HOWTO c=0 r=0 "howto.prusa3d.com"
+MSG_RECOVERING_PRINT c=20 r=1 "Recovering print    "
+MSG_RESEND c=0 r=0 "Resend: "
+MSG_RESUME_PRINT c=0 r=0 "Resume print"
+MSG_RESUMING c=0 r=0 "Resuming print"
+MSG_RESUMING_PRINT c=20 r=1 "Resuming print"
+MSG_RIGHT c=12 r=1 "Right:"
+MSG_SD_CANT_ENTER_SUBDIR c=0 r=0 "Cannot enter subdir: "
+MSG_SD_CANT_OPEN_SUBDIR c=0 r=0 "Cannot open subdir"
+MSG_SD_CARD_OK c=0 r=0 "SD card ok"
+MSG_SD_FILE_OPENED c=0 r=0 "File opened: "
+MSG_SD_FILE_SELECTED c=0 r=0 "File selected"
+MSG_SD_INIT_FAIL c=0 r=0 "SD init fail"
+MSG_SD_INSERTED c=0 r=0 "Card inserted"
+MSG_SD_OPENROOT_FAIL c=0 r=0 "openRoot failed"
+MSG_SD_PRINTING_BYTE c=0 r=0 "SD printing byte "
+MSG_SD_REMOVED c=0 r=0 "Card removed"
+MSG_SD_VOL_INIT_FAIL c=0 r=0 "volume.init failed"
+MSG_SD_WRITE_TO_FILE c=0 r=0 "Writing to file: "
+MSG_SECOND_SERIAL_OFF c=17 r=1 "RPi port    [off]"
+MSG_SECOND_SERIAL_ON c=17 r=1 "RPi port     [on]"
+MSG_SELFTEST c=0 r=0 "Selftest         "
+MSG_SELFTEST_AXIS c=0 r=0 "Axis"
+MSG_SELFTEST_AXIS_LENGTH c=0 r=0 "Axis length"
+MSG_SELFTEST_BEDHEATER c=0 r=0 "Bed / Heater"
+MSG_SELFTEST_ENDSTOP c=0 r=0 "Endstop"
+MSG_SELFTEST_ENDSTOP_NOTHIT c=20 r=1 "Endstop not hit"
+MSG_SELFTEST_ENDSTOPS c=0 r=0 "Endstops"
+MSG_SELFTEST_ERROR c=0 r=0 "Selftest error !"
+MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 r=0 "Extruder fan:"
+MSG_SELFTEST_FANS c=0 r=0 "Front/left fans"
+MSG_SELFTEST_FILAMENT_SENSOR c=18 r=0 "Filament sensor:"
+MSG_SELFTEST_HEATERTHERMISTOR c=0 r=0 "Heater/Thermistor"
+MSG_SELFTEST_CHECK_ALLCORRECT c=20 r=0 "All correct      "
+MSG_SELFTEST_CHECK_ENDSTOPS c=20 r=0 "Checking endstops"
+MSG_SELFTEST_CHECK_HOTEND c=20 r=0 "Checking hotend  "  
+MSG_SELFTEST_CHECK_X c=20 r=0 "Checking X axis  "
+MSG_SELFTEST_CHECK_Y c=20 r=0 "Checking Y axis  "
+MSG_SELFTEST_CHECK_Z c=20 r=0 "Checking Z axis  "
+MSG_SELFTEST_NOTCONNECTED c=0 r=0 "Not connected"
+MSG_SELFTEST_OK c=0 r=0 "Self test OK"
+MSG_SELFTEST_PLEASECHECK c=0 r=0 "Please check :"	
+MSG_SELFTEST_PRINT_FAN_SPEED c=18 r=0 "Print fan:"
+MSG_SELFTEST_START c=20 r=0 "Self test start  "
+MSG_SELFTEST_SWAPPED c=0 r=0 "Swapped"
+MSG_SET_TEMPERATURE c=19 r=1 "Set temperature:"
+MSG_SEVERE_SKEW c=15 r=1 "Severe skew:"
+MSG_SHOW_END_STOPS c=17 r=1 "Show end stops"
+MSG_SLIGHT_SKEW c=15 r=1 "Slight skew:"
+MSG_SORT_ALPHA c=17 r=1 "Sort:  [Alphabet]"
+MSG_SORT_NONE c=17 r=1 "Sort:      [None]"
+MSG_SORT_TIME c=17 r=1 "Sort:      [Time]"
+MSG_SORTING c=20 r=1 "Sorting files"
+MSG_SPEED c=0 r=0 "Speed"
+MSG_STACK_ERROR c=20 r=4 "Error - static memory has been overwritten"
+MSG_STATISTICS c=0 r=0 "Statistics  "
+MSG_STATS_FILAMENTUSED c=20 r=0 "Filament used:  "
+MSG_STATS_PRINTTIME c=20 r=0 "Print time:  "
+MSG_STATS_TOTALFILAMENT c=20 r=0 "Total filament :"
+MSG_STATS_TOTALPRINTTIME c=20 r=0 "Total print time :"
+MSG_STEPPER_TOO_HIGH c=0 r=0 "Steprate too high: "
+MSG_SUPPORT c=0 r=0 "Support"
+MSG_TEMP_CAL_FAILED c=20 r=8 "Temperature calibration failed"
+MSG_TEMP_CAL_WARNING c=20 r=4 "Stable ambient temperature 21-26C is needed a rigid stand is required."
+MSG_TEMP_CALIBRATION_OFF c=20 r=1 "Temp. cal.  [off]"
+MSG_TEMP_CALIBRATION_ON c=20 r=1 "Temp. cal.   [on]"
+MSG_TEMPERATURE c=0 r=0 "Temperature"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF c=19 r=1 "SD card  [normal]"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON c=19 r=1 "SD card [FlshAir]"
+MSG_TUNE c=0 r=0 "Tune"
+MSG_UNLOAD_ALL c=0 r=0 "Unload all"
+MSG_UNLOAD_FILAMENT_1 c=17 r=0 "Unload filament 1"
+MSG_UNLOAD_FILAMENT_2 c=17 r=0 "Unload filament 2"
+MSG_UNLOAD_FILAMENT_3 c=17 r=0 "Unload filament 3"
+MSG_UNLOAD_FILAMENT_4 c=17 r=0 "Unload filament 4"
+MSG_UNLOAD_SUCCESSFUL c=20 r=2 "Was filament unload successful?"
+MSG_USED c=19 r=1 "Used during print"
+MSG_USERWAIT c=0 r=0 "Wait for user..."
+MSG_V2_CALIBRATION c=17 r=1 "First layer cal."
+MSG_WAITING_TEMP c=20 r=3 "Waiting for nozzle and bed cooling"
+MSG_WAITING_TEMP_PINDA c=20 r=3 "Waiting for PINDA probe cooling"
+MSG_WIZARD c=17 r=1 "Wizard"
+MSG_WIZARD_CLEAN_HEATBED c=20 r=8 "Please clean heatbed and then press the knob."
+MSG_WIZARD_FILAMENT_LOADED c=20 r=2 "Is filament loaded?"
+MSG_WIZARD_INSERT_CORRECT_FILAMENT c=20 r=8 "Please load PLA filament and then resume Wizard by rebooting the printer."
+MSG_WIZARD_LOAD_FILAMENT c=20 r=8 "Please insert PLA filament to the extruder, then press knob to load it."
+MSG_WIZARD_PLA_FILAMENT c=20 r=2 "Is it PLA filament?"
+MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 "Do you want to repeat last step to readjust distance between nozzle and heatbed?"
+MSG_WIZARD_RERUN c=20 r=7 "Running Wizard will delete current calibration results and start from the beginning. Continue?"
+MSG_WIZARD_SELFTEST c=20 r=8 "First, I will run the selftest to check most common assembly problems."
+MSG_WIZARD_V2_CAL c=20 r=8 "Now I will calibrate distance between tip of the nozzle and heatbed surface."
+MSG_WIZARD_V2_CAL_2 c=20 r=12 "I will start to print line and you will gradually lower the nozzle by rotating the knob, until you reach optimal height. Check the pictures in our handbook in chapter Calibration."
+MSG_WIZARD_WELCOME c=20 r=7 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"
+MSG_WIZARD_WILL_PREHEAT c=20 r=4 "Now I will preheat nozzle for PLA."
+MSG_WIZARD_XYZ_CAL c=20 r=8 "I will run xyz calibration now. It will take approx. 12 mins."
+MSG_WIZARD_Z_CAL c=20 r=8 "I will run z calibration now."
+MSG_XYZ_DETAILS c=19 r=1 "XYZ cal. details"
+MSG_Y_DISTANCE_FROM_MIN c=20 r=1 "Y distance from min:"

lang_upgrade/msgs_es.txt

@@ -0,0 +1,289 @@
+MSG_ADJUSTZ "Ajustar Eje Z"			
+MSG_ALL "Todos"
+MSG_AUTO_HOME "Llevar al origen"
+MSG_BABYSTEP_X "Babystep X"
+MSG_BABYSTEP_Y "Babystep Y"
+MSG_BABYSTEP_Z "Micropaso Eje Z"
+MSG_BABYSTEP_Z_NOT_SET "Distancia entre la punta del nozzle y la superficie de la heatbed aun no fijada. Por favor siga el manual, capitulo First steps, First layer calibration."
+MSG_BABYSTEPPING_X "Babystepping X"
+MSG_BABYSTEPPING_Y "Babystepping Y"
+MSG_BABYSTEPPING_Z "Ajustar Z"
+MSG_BED "Heatbed"
+MSG_BED_CORRECTION_FRONT "Frontal   [um]"
+MSG_BED_CORRECTION_LEFT "Izquierda [um]"
+MSG_BED_CORRECTION_MENU "Corr. de la cama"
+MSG_BED_CORRECTION_REAR "Trasera   [um]"
+MSG_BED_CORRECTION_RESET "Reset"
+MSG_BED_CORRECTION_RIGHT "Derecha   [um]"
+MSG_BED_DONE "Base preparada"
+MSG_BED_HEATING "Calentando Base"
+MSG_BED_LEVELING_FAILED_POINT_HIGH "Nivelacion fallada. Sensor funciona demasiado temprano. Esperando reset."
+MSG_BED_LEVELING_FAILED_POINT_LOW "Nivelacion fallada. Sensor no funciona. Escombros en nozzle? Esperando reset."
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Nivelacion fallada. Sensor desconectado o cables danados. Esperando reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibracion XYZ fallada. Puntos frontales no alcanzables."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibracion XYZ fallada. Punto frontal izquierdo no alcanzable."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibracion XYZ fallad. Punto frontal derecho no alcanzable."
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibracion XYZ fallada. Consulta el manual por favor."
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibracion XYZ ok. Ejes X/Y perpendiculares. Enhorabuena!"
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibracion XYZ fallada. Puntos de calibracion en heatbed no encontrados."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibracion XYZ correcta. La inclinacion se corregira automaticamente."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibracion XYZ correcta. Los ejes X / Y estan ligeramente inclinados. Buen trabajo!"
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazion XYZ comprometida. Puntos frontales no alcanzables."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazion XYZ comprometida. Punto frontal izquierdo no alcanzable."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazion XYZ comprometida. Punto frontal derecho no alcanzable."
+MSG_BEGIN_FILE_LIST "Begin file list"
+MSG_CALIBRATE_BED "Calibra XYZ"
+MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
+MSG_CALIBRATE_E "Calibrar E"
+MSG_CALIBRATE_PINDA "Calibrar"
+MSG_CALIBRATION_PINDA_MENU "Calibracion temp."
+MSG_CARD_MENU "Menu tarjeta SD"
+MSG_CLEAN_NOZZLE_E "E calibrado. Limpia nozzle. Haz clic una vez terminado."
+MSG_CNG_SDCARD "Change SD card"
+MSG_CONFIGURATION_VER " Last Updated: "
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Carros Z izq./der. estan arriba maximo?"
+MSG_CONFIRM_NOZZLE_CLEAN "Limpia nozzle para calibracion. Click cuando acabes."
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Filamentos ajustados. Limpia nozzle para calibracion. Haz clic una vez terminado."
+MSG_CONTROL "Control"
+MSG_COOLDOWN "Enfriar"
+MSG_CORRECTLY "Cambiado correct.?"
+MSG_CURRENT "Actual"
+MSG_DISABLE_STEPPERS "Apagar motores"
+MSG_DWELL "En espera"
+MSG_E_CAL_KNOB "Rotar el mando hasta que la marca llegue al cuerpo del extrusor. Haz clic una vez terminado."
+MSG_END_FILE_LIST "End file list"
+MSG_ENDSTOP_HIT "TRIGGERED"
+MSG_ENDSTOP_OPEN "open"
+MSG_ENDSTOPS_HIT "endstops hit: "
+MSG_Enqueing "enqueing \""
+MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
+MSG_ERR_KILLED "Printer halted. kill() called!"
+MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
+MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
+MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+MSG_ERROR "ERROR:"
+MSG_EXTRUDER "Extrusor"
+MSG_EXTRUDER_1 "Extrusor 1"
+MSG_EXTRUDER_2 "Extrusor 2"
+MSG_EXTRUDER_3 "Extrusor 3"
+MSG_EXTRUDER_4 "Extrusor 4"
+MSG_FACTOR " \002 Fact"
+MSG_FAN_SPEED "Velocidad Vent."
+MSG_FIL_ADJUSTING "Ajustando filamentos. Espera por favor."
+MSG_FILAMENT_CLEAN "Es el nuevo color nitido?"
+MSG_FILAMENT_LOADING_T0 "Insertar filamento en el extrusor 1. Haz clic una vez terminado."
+MSG_FILAMENT_LOADING_T1 "Insertar filamento en el extrusor 2. Haz clic una vez terminado."
+MSG_FILAMENT_LOADING_T2 "Insertar filamento en el extrusor 3. Haz clic una vez terminado."
+MSG_FILAMENT_LOADING_T3 "Insertar filamento en el extrusor 4. Haz clic una vez terminado."
+MSG_FILAMENTCHANGE "Cambiar filamento"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiteracion "
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Buscando punto de calibracion heatbed"
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " de 4"
+MSG_FINISHING_MOVEMENTS "Term. movimientos"
+MSG_FLOW "Flujo"
+MSG_FLOW0 "Flow 0"
+MSG_FLOW1 "Flow 1"
+MSG_FLOW2 "Flow 2"
+MSG_FOLLOW_CALIBRATION_FLOW "Impresora no esta calibrada todavia. Por favor usa el manual, capitulo First steps, Calibration flow."
+MSG_FREE_MEMORY " Free Memory: "
+MSG_HEATING "Calentando..."
+MSG_HEATING_COMPLETE "Calentamiento final."
+MSG_HOMEYZ "Calibrar Z"
+MSG_HOMEYZ_DONE "Calibracion OK"
+MSG_HOMEYZ_PROGRESS "Calibrando Z"
+MSG_CHANGE_EXTR "Cambiar extrusor."
+MSG_CHANGE_SUCCESS "Cambio correcto"
+MSG_CHANGING_FILAMENT "Cambiando filamento"
+MSG_CHOOSE_EXTRUDER "Elegir extrusor:"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Mejorando punto de calibracion heatbed"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " de 4"
+MSG_INIT_SDCARD "Init. SD card"
+MSG_INSERT_FILAMENT "Introducir filamento"
+MSG_KILLED "PARADA DE EMERGENCIA"
+MSG_LANGUAGE_NAME "Espanol"
+MSG_LANGUAGE_SELECT "Cambiae el idioma"
+MSG_LOAD_ALL "Intr. todos fil."
+MSG_LOAD_EPROM "Load memory"
+MSG_LOAD_FILAMENT "Introducir filam."
+MSG_LOAD_FILAMENT_1 "Introducir fil. 1"
+MSG_LOAD_FILAMENT_2 "Introducir fil. 2"
+MSG_LOAD_FILAMENT_3 "Introducir fil. 3"
+MSG_LOAD_FILAMENT_4 "Introducir fil. 4"
+MSG_LOADING_COLOR "Cambiando color" 
+MSG_LOADING_FILAMENT "Introduciendo filam."
+MSG_LOOSE_PULLEY "Polea suelta"
+MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+MSG_M117_V2_CALIBRATION "M117 Cal. primera cap."
+MSG_M119_REPORT "Reporting endstop status"
+MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
+MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
+MSG_MAIN "Menu principal"
+MSG_MARK_FIL "Marque el filamento 100 mm por encima del final del extrusor. Haz clic una vez terminado."
+MSG_MAX " \002 Max"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Midiendo altura del punto de calibracion"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " de 9"
+MSG_MENU_CALIBRATION "Calibracion"
+MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
+MSG_MIN " \002 Min"
+MSG_MOTION "Motion"
+MSG_MOVE_AXIS "Mover ejes"
+MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrando XYZ. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrando Z. Gira el boton para subir el extrusor hasta tocar los topes superiores. Despues haz clic."
+MSG_MOVE_E "Extruir"
+MSG_MOVE_X "Mover X"
+MSG_MOVE_Y "Mover Y"
+MSG_MOVE_Z "Mover Z"
+MSG_NEW_FIRMWARE_AVAILABLE "Nuevo firmware disponible:"
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Actualizar por favor"
+MSG_NO "No"
+MSG_NO_CARD "No hay tarjeta SD"
+MSG_NO_MOVE "Sin movimiento"
+MSG_NOT_COLOR "Color no homogeneo"
+MSG_NOT_LOADED "Fil. no introducido"
+MSG_NOZZLE "Nozzle"
+MSG_NOZZLE1 "Nozzle2"
+MSG_NOZZLE2 "Nozzle3"
+MSG_OK "ok"
+MSG_PAPER "Colocar una hoja de papel sobre la superficie de impresion durante la calibracion de los primeros 4 puntos. Si la boquilla mueve el papel, apagar impresora inmediatamente."
+MSG_PAUSE_PRINT "Pausar impresion"
+MSG_PICK_Z "Esc. Modelo Adecuado"
+MSG_PID_EXTRUDER "Calibracion PID"
+MSG_PID_FINISHED "Cal. PID terminada"
+MSG_PID_RUNNING "Cal. PID           "
+MSG_PINDA_NOT_CALIBRATED "La temperatura de calibracion no ha sido ajustada"
+MSG_PINDA_PREHEAT "Calentando PINDA"
+MSG_PLA_FILAMENT_LOADED "Esta el filamento PLA cargado?"
+MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+MSG_PLEASE_LOAD_PLA "Carga el filamento PLA primero por favor."
+MSG_PLEASE_WAIT "Por Favor Esperar"
+MSG_POWERUP "PowerUp"
+MSG_PREHEAT "Precalentar"
+MSG_PREHEAT_NOZZLE "Precalentar extrusor"
+MSG_PREPARE_FILAMENT "Preparar filamento"
+MSG_PREPARE_FILAMENT "Preparar filamento"
+MSG_PRESS "Haz clic"
+MSG_PRINT_ABORTED "Impresion cancelada" 
+MSG_PRINT_PAUSED "Impresion en pausa"
+MSG_PRUSA3D "prusa3d.com"
+MSG_PRUSA3D_FORUM "forum.prusa3d.com"
+MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
+MSG_REBOOT "Reiniciar impresora"
+MSG_RECTRACT "Rectract"
+MSG_REFRESH "\xF8" "Refresh"
+MSG_RESEND "Resend: "
+MSG_RESTORE_FAILSAFE "Restore failsafe"
+MSG_RESUME_PRINT "Reanudar impres."
+MSG_RESUMING "Resumiendo impresion"
+MSG_RESUMING_PRINT "Reanudar impresion"
+MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
+MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+MSG_SD_CARD_OK "SD card ok"
+MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+MSG_SD_FILE_OPENED "File opened: "
+MSG_SD_FILE_SELECTED "File selected"
+MSG_SD_INIT_FAIL "SD init fail"
+MSG_SD_INSERTED "Tarjeta insertada"
+MSG_SD_NOT_PRINTING "Not SD printing"
+MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+MSG_SD_OPENROOT_FAIL "openRoot failed"
+MSG_SD_PRINTING_BYTE "SD printing byte "
+MSG_SD_REMOVED "Tarjeta retirada"
+MSG_SD_VOL_INIT_FAIL "volume.init failed"
+MSG_SD_WORKDIR_FAIL "workDir open failed"
+MSG_SD_WRITE_TO_FILE "Writing to file: "
+MSG_SELFTEST "Selftest"
+MSG_SELFTEST_BEDHEATER "Heatbed"
+MSG_SELFTEST_COOLING_FAN "Vent. frontal?"
+MSG_SELFTEST_ENDSTOP "Tope final"
+MSG_SELFTEST_ENDSTOP_NOTHIT "Tope no alcanzado"
+MSG_SELFTEST_ENDSTOPS "Topes finales"
+MSG_SELFTEST_ERROR "Autotest error!"
+MSG_SELFTEST_EXTRUDER_FAN "Vent. izquierdo?"
+MSG_SELFTEST_FAILED "Fallo Selftest"
+MSG_SELFTEST_FAN "Test ventiladores"
+MSG_SELFTEST_FAN_NO "Ventilador no gira"
+MSG_SELFTEST_FAN_YES "Ventilador gira"
+MSG_SELFTEST_HEATERTHERMISTOR "Hotend"
+MSG_SELFTEST_CHECK_ALLCORRECT "Todo bien"
+MSG_SELFTEST_CHECK_BED "Control heatbed"
+MSG_SELFTEST_CHECK_ENDSTOPS "Control topes"
+MSG_SELFTEST_CHECK_HOTEND "Control hotend " 
+MSG_SELFTEST_CHECK_X "Control tope X"
+MSG_SELFTEST_CHECK_Y "Control tope Y"
+MSG_SELFTEST_CHECK_Z "Control tope Z"
+MSG_SELFTEST_MOTOR "Motor"
+MSG_SELFTEST_NOTCONNECTED "No hay conexion  "
+MSG_SELFTEST_OK "Self test OK"
+MSG_SELFTEST_PLEASECHECK "Controla :"   
+MSG_SELFTEST_START "Inicio Selftest"
+MSG_SELFTEST_WIRINGERROR "Error de conexion"
+MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
+MSG_SET_HOME_OFFSETS "Set home offsets"
+MSG_SET_ORIGIN "Set origin"
+MSG_SET_TEMPERATURE "Establecer temp.:"
+MSG_SETTINGS "Configuracion"
+MSG_SHOW_END_STOPS "Ensena tope final"
+MSG_SILENT_MODE_OFF "Modo [rend.pleno]" 
+MSG_SILENT_MODE_ON "Modo   [silencio]"
+MSG_SPEED "Velocidad"
+MSG_STATISTICS "Estadisticas  "
+MSG_STATS_FILAMENTUSED "Filamento usado:  "
+MSG_STATS_PRINTTIME "Tiempo de imp.:"
+MSG_STATS_TOTALFILAMENT "Filamento total:"
+MSG_STATS_TOTALPRINTTIME "Tiempo total :"
+MSG_STEPPER_TOO_HIGH "Steprate too high: "
+MSG_STOP_PRINT "Detener impresion"
+MSG_STOPPED "PARADA"
+MSG_STORE_EPROM "Store memory"
+MSG_SUPPORT "Soporte"
+MSG_SWITCH_PS_OFF "Switch power off"
+MSG_SWITCH_PS_ON "Switch power on"
+MSG_TAKE_EFFECT " para aplicar cambios" 
+MSG_TEMP_CALIBRATION "Cal. temp.          "
+MSG_TEMP_CALIBRATION_DONE "Calibracon temperatura terminada. Haz clic para continuar."
+MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
+MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
+MSG_TEMPERATURE "Temperatura"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
+MSG_TUNE "Ajustar"
+MSG_UNLOAD_ALL "Soltar todos fil."
+MSG_UNLOAD_FILAMENT "Soltar filamento"
+MSG_UNLOAD_FILAMENT_1 "Soltar fil. 1"
+MSG_UNLOAD_FILAMENT_2 "Soltar fil. 2"
+MSG_UNLOAD_FILAMENT_3 "Soltar fil. 3"
+MSG_UNLOAD_FILAMENT_4 "Soltar fil. 4"
+MSG_UNLOADING_FILAMENT "Soltando filamento"
+MSG_USB_PRINTING "Impresion con USB "
+MSG_USED "Usado en impresion"
+MSG_USERWAIT "Esperando ordenes"
+MSG_V2_CALIBRATION "Cal. primera cap."
+MSG_VOLUMETRIC "Filament"
+MSG_VOLUMETRIC_ENABLED "E in mm3"
+MSG_WAITING_TEMP "Esperando enfriamiento de heatbed y extrusor."
+MSG_WATCH "Monitorizar"
+MSG_WIZARD "Wizard"
+MSG_WIZARD_CALIBRATION_FAILED "Lee el manual y resuelve el problema. Despues, reinicia la impresora y continua con el Wizard"
+MSG_WIZARD_CLEAN_HEATBED "Limpia la superficie de la heatbed, por favor, y haz clic"
+MSG_WIZARD_DONE "Terminado! Feliz impresion!"
+MSG_WIZARD_FILAMENT_LOADED "Esta el filamento cargado?"
+MSG_WIZARD_HEATING "Precalentando nozzle. Espera por favor."
+MSG_WIZARD_INSERT_CORRECT_FILAMENT "Carga filamento PLA, por favor, y reinicia la impresora para continuar con el Wizard"
+MSG_WIZARD_LOAD_FILAMENT "Inserta, por favor, filamento PLA en el extrusor. Despues haz clic para cargarlo."
+MSG_WIZARD_PLA_FILAMENT "Es el filamento PLA?"
+MSG_WIZARD_QUIT "Siempre puedes acceder al asistente desde Calibracion -> Wizard"
+MSG_WIZARD_REPEAT_V2_CAL "Quieres repetir el ultimo paso para reajustar la distancia nozzle-heatbed?"
+MSG_WIZARD_RERUN "Ejecutar el Wizard borrara los valores de calibracion actuales y comenzara de nuevo. Continuar?"
+MSG_WIZARD_SELFTEST "Primero, hare el Selftest para comprobar los problemas de montaje mas comunes."
+MSG_WIZARD_V2_CAL "Voy a calibrar la distancia entre la punta del nozzle y la superficie de la heatbed."
+MSG_WIZARD_V2_CAL_2 "Voy a comenzar a imprimir la linea y tu bajaras el nozzle gradualmente al rotar el mando, hasta que llegues a la altura optima. Mira las imagenes del capitulo Calibracion en el manual."
+MSG_WIZARD_WELCOME "Hola, soy tu impresora Original Prusa i3. Quieres que te guie a traves de la configuracion?"
+MSG_WIZARD_WILL_PREHEAT "Voy a precalentar el nozzle para PLA ahora."
+MSG_WIZARD_XYZ_CAL "Hare la calibracion XYZ. Tardara 12 min. aproximadamente."
+MSG_WIZARD_Z_CAL "Voy a hacer Calibracion Z ahora."
+MSG_YES "Si"
+WELCOME_MSG CUSTOM_MENDEL_NAME " prep."

lang_upgrade/msgs_it.txt

@@ -0,0 +1,294 @@
+MSG_ADJUSTZ "Autoregolare Z?"
+MSG_ALL "Tutti"
+MSG_AUTO_HOME "Trova origine"
+MSG_BABYSTEP_X "Babystep X"
+MSG_BABYSTEP_Y "Babystep Y"
+MSG_BABYSTEP_Z "Compensazione Z"
+MSG_BABYSTEP_Z_NOT_SET "Distanza tra la punta dell'ugello e la superficie del letto non ancora imposta. Si prega di seguire il manuale, capitolo First steps, sezione First layer calibration."
+MSG_BABYSTEPPING_X "Babystepping X"
+MSG_BABYSTEPPING_Y "Babystepping Y"
+MSG_BABYSTEPPING_Z "Compensazione Z"
+MSG_BED "Letto"
+MSG_BED_CORRECTION_FRONT "Fronte    [um]"
+MSG_BED_CORRECTION_LEFT "Sinistra  [um]"
+MSG_BED_CORRECTION_MENU "Correz. liv.letto"
+MSG_BED_CORRECTION_REAR "Retro     [um]"
+MSG_BED_CORRECTION_RESET "Reset"			
+MSG_BED_CORRECTION_RIGHT "Destra    [um]"
+MSG_BED_DONE "Piatto fatto."
+MSG_BED_HEATING "Riscald. letto"
+MSG_BED_LEVELING_FAILED_POINT_HIGH "Livellamento letto fallito.Risp sensore troppo prestoIn attesa di reset."
+MSG_BED_LEVELING_FAILED_POINT_LOW "Livellamento letto fallito.NoRispSensor Residui su ugello? In attesa di reset."
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Livellamento letto fallito. Sensore discon. o Cavo Dann. In attesa di reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Calibrazione XYZ fallita. Punti anteriori non raggiungibili."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Calibrazione XYZ fallita. Punto anteriore sinistro non raggiungibile."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Calibrazione XYZ fallita. Punto anteriore destro non raggiungibile."
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Calibrazione XYZ fallita. Si prega di consultare il manuale."
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Calibrazione XYZ OK. Gli assi X/Y sono perpendicolari. Complimenti!"
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Calibrazione XYZ fallita. Il punto di calibrazione sul letto non e' stato trovato."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Calibrazion XYZ corretta. La distorsione verra' automaticamente compensata."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Calibrazion XYZ corretta. Assi X/Y leggermente storti. Ben fatto!"
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Calibrazione XYZ compromessa. Punti anteriori non raggiungibili."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Calibrazione XYZ compromessa. Punto anteriore sinistro non raggiungibile."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Calibrazione XYZ compromessa. Punto anteriore destro non raggiungibile."
+MSG_BEGIN_FILE_LIST "Begin file list"
+MSG_CALIBRATE_BED "Calibra XYZ"
+MSG_CALIBRATE_BED_RESET "Reset XYZ calibr."
+MSG_CALIBRATE_E "Calibra E"
+MSG_CALIBRATE_PINDA "Calibrare"
+MSG_CALIBRATION_PINDA_MENU "Taratura temp."
+MSG_CARD_MENU "Stampa da SD"
+MSG_CLEAN_NOZZLE_E "Calibrazione E terminata. Si prega di pulire l'ugello. Click per continuare."
+MSG_CNG_SDCARD "Change SD card"
+MSG_CONFIGURATION_VER " Last Updated: "
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP "I carrelli Z sin/des sono altezza max?"
+MSG_CONFIRM_NOZZLE_CLEAN "Pulire l'ugello per la calibrazione, poi fare click."
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "I filamenti sono regolati. Si prega di pulire l'ugello per la calibrazione. Click per continuare."
+MSG_COOLDOWN "Raffredda"
+MSG_CORRECTLY "Cambiato corr.?"
+MSG_CURRENT "Attuale"
+MSG_DATE "Data"
+MSG_DISABLE_STEPPERS "Disabilit motori"
+MSG_DWELL "Sospensione..."
+MSG_E_CAL_KNOB "Girare la manopola affinche' il segno raggiunga il corpo dell'estrusore. Click per continuare."
+MSG_END_FILE_LIST "End file list"
+MSG_ENDSTOP_HIT "TRIGGERED"
+MSG_ENDSTOP_OPEN "open"
+MSG_ENDSTOPS_HIT "endstops hit: "
+MSG_Enqueing "enqueing \""
+MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
+MSG_ERR_KILLED "Printer halted. kill() called!"
+MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
+MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
+MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+MSG_ERROR "ERRORE:"
+MSG_EXTRUDER "Estrusore"
+MSG_EXTRUDER_1 "Estrusore 1"
+MSG_EXTRUDER_2 "Estrusore 2"
+MSG_EXTRUDER_3 "Estrusore 3"
+MSG_EXTRUDER_4 "Estrusore 4"
+MSG_FAN_SPEED "Velocita vent."
+MSG_FIL_ADJUSTING "Filamento in fase di regolazione. Attendere prego."
+MSG_FILAMENT_CLEAN "Il colore e' nitido?"
+MSG_FILAMENT_LOADING_T0 "Inserire filamento nell'estrusore 1. Click per continuare."
+MSG_FILAMENT_LOADING_T1 "Inserire filamento nell'estrusore 2. Click per continuare."
+MSG_FILAMENT_LOADING_T2 "Inserire filamento nell'estrusore 3. Click per continuare."
+MSG_FILAMENT_LOADING_T3 "Inserire filamento nell'estrusore 4. Click per continuare."
+MSG_FILAMENTCHANGE "Camb. filamento"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Reiterazione "
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Ricerca del letto punto di calibraz."
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " su 4"
+MSG_FINISHING_MOVEMENTS "Arresto in corso"
+MSG_FLOW "Flusso"
+MSG_FOLLOW_CALIBRATION_FLOW "Stampante ancora non calibrata. Si prega di seguire il manuale, capitolo PRIMI PASSI, sezione della calibrazione."
+MSG_FREE_MEMORY " Free Memory: "
+MSG_HEATING "Riscaldamento..."
+MSG_HEATING_COMPLETE "Riscald. completo"
+MSG_HOMEYZ "Calibra Z"
+MSG_HOMEYZ_DONE "Calibrazione OK"
+MSG_HOMEYZ_PROGRESS "Calibrando Z"
+MSG_CHANGE_EXTR "Cambio estrusore."
+MSG_CHANGE_SUCCESS "Cambio riuscito!"
+MSG_CHANGING_FILAMENT "Cambiando filam."
+MSG_CHOOSE_EXTRUDER "Seleziona estrusore:"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Perfezion. il letto punto di calibraz."
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " su 4"
+MSG_INIT_SDCARD "Init. SD card"
+MSG_INSERT_FILAMENT "Inserire filamento"
+MSG_KILLED "IN TILT."
+MSG_LANGUAGE_NAME "Italiano"
+MSG_LANGUAGE_SELECT "Seleziona lingua"
+MSG_LEFT "Sinistra:"
+MSG_LOAD_ALL "Caricare tutti"
+MSG_LOAD_EPROM "Load memory"
+MSG_LOAD_FILAMENT "Carica filamento"
+MSG_LOAD_FILAMENT_1 "Caricare fil. 1"
+MSG_LOAD_FILAMENT_2 "Caricare fil. 2"
+MSG_LOAD_FILAMENT_3 "Caricare fil. 3"
+MSG_LOAD_FILAMENT_4 "Caricare fil. 4"
+MSG_LOADING_COLOR "Caricando colore"
+MSG_LOADING_FILAMENT "Caricando filam."
+MSG_LOOSE_PULLEY "Puleggia lenta"
+MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+MSG_M117_V2_CALIBRATION "M117 Cal. primo layer."
+MSG_M119_REPORT "Reporting endstop status"
+MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
+MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
+MSG_MAIN "Menu principale"
+MSG_MARK_FIL "Segnare il filamento a 100 mm di distanza dal corpo dell'estrusore. Click per continuare."
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Misurare l'altezza di riferimento del punto di calibrazione"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " su 9"
+MSG_MEASURED_SKEW "Incl. misurata:"
+MSG_MENU_CALIBRATION "Calibrazione"
+MSG_MESH_BED_LEVELING "Mesh livel. letto"
+MSG_MOTION "Motion"
+MSG_MOVE_01MM "Move 0.1mm"
+MSG_MOVE_10MM "Move 10mm"
+MSG_MOVE_1MM "Move 1mm"
+MSG_MOVE_AXIS "Muovi asse"
+MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrazione XYZ. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Calibrazione Z. Ruotare la manopola per alzare il carrello Z fino all'altezza massima. Click per terminare."
+MSG_MOVE_E "Muovi Estrusore"
+MSG_MOVE_X "Muovi X"
+MSG_MOVE_Y "Muovi Y"
+MSG_MOVE_Z "Muovi Z"
+MSG_NEW_FIRMWARE_AVAILABLE "Nuova versione del firmware disponibile"
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prega aggiorna."
+MSG_NO "No"
+MSG_NO_CARD "Nessuna SD"
+MSG_NO_MOVE "Nessun movimento."
+MSG_NOT_COLOR "Colore non puro"
+MSG_NOT_LOADED "Fil. non caricato"
+MSG_NOZZLE "Ugello"
+MSG_NOZZLE1 "Nozzle2"
+MSG_NOZZLE2 "Nozzle3"
+MSG_OK "ok"
+MSG_PAPER "Porre un foglio sotto l'ugello durante la calibrazione dei primi 4 punti. In caso l'ugello muova il foglio spegnere prontamente la stampante."
+MSG_PAUSE_PRINT "Metti in pausa"
+MSG_PICK_Z "Pick print"
+MSG_PID_EXTRUDER "Calibrazione PID"
+MSG_PID_FINISHED "Cal. PID completa"
+MSG_PID_RUNNING "Cal. PID"
+MSG_PINDA_NOT_CALIBRATED "Taratura della temperatura non ancora eseguita"
+MSG_PINDA_PREHEAT "Riscald. PINDA"
+MSG_PLA_FILAMENT_LOADED "Il PLA e stato caricato?"
+MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+MSG_PLEASE_LOAD_PLA "Per favore prima caricare filamento di PLA."
+MSG_PLEASE_WAIT "Aspetta"
+MSG_POSITION_UNKNOWN "Home X/Y before Z"
+MSG_POWERUP "PowerUp"
+MSG_PREHEAT "Preriscalda"
+MSG_PREHEAT_NOZZLE "Preris. ugello!"
+MSG_PREPARE_FILAMENT "Preparare filamento"
+MSG_PRESS "e cliccare manopola"
+MSG_PRINT_ABORTED "Stampa abortita"
+MSG_PRINT_PAUSED "Stampa in pausa"
+MSG_PRUSA3D "prusa3d.com"
+MSG_PRUSA3D_FORUM "forum.prusa3d.com"
+MSG_PRUSA3D_HOWTO "howto.prusa3d.com"
+MSG_REBOOT "Riavvia stampante"
+MSG_REFRESH "\xF8" "Refresh"
+MSG_RESEND "Resend: "
+MSG_RESTORE_FAILSAFE "Restore failsafe"
+MSG_RESUME_PRINT "Riprendi stampa"
+MSG_RESUMING "Riprendi stampa"
+MSG_RESUMING_PRINT "Stampa in ripresa"
+MSG_RIGHT "Destra:"
+MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
+MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+MSG_SD_CARD_OK "SD card ok"
+MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+MSG_SD_FILE_OPENED "File opened: "
+MSG_SD_FILE_SELECTED "File selected"
+MSG_SD_INIT_FAIL "SD init fail"
+MSG_SD_INSERTED "SD inserita"
+MSG_SD_NOT_PRINTING "Not SD printing"
+MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+MSG_SD_OPENROOT_FAIL "openRoot failed"
+MSG_SD_PRINTING_BYTE "SD printing byte "
+MSG_SD_REMOVED "SD rimossa"
+MSG_SD_VOL_INIT_FAIL "volume.init failed"
+MSG_SD_WORKDIR_FAIL "workDir open failed"
+MSG_SD_WRITE_TO_FILE "Writing to file: "
+MSG_SELFTEST "Autotest"
+MSG_SELFTEST_BEDHEATER "Letto/Riscald."
+MSG_SELFTEST_COOLING_FAN "Vent di stampa ant.?"
+MSG_SELFTEST_ENDSTOP "Finecorsa"
+MSG_SELFTEST_ENDSTOP_NOTHIT "Finec. fuori por."
+MSG_SELFTEST_ENDSTOPS "Finecorsa (2)"
+MSG_SELFTEST_ERROR "Autotest negativo"
+MSG_SELFTEST_EXTRUDER_FAN "Vent SX sull'ugello?"
+MSG_SELFTEST_FAILED "Autotest fallito"
+MSG_SELFTEST_FAN "Prova del ventilator"
+MSG_SELFTEST_FAN_NO "Non si gira"
+MSG_SELFTEST_FAN_YES "Gira"
+MSG_SELFTEST_HEATERTHERMISTOR "Riscald./Termist."
+MSG_SELFTEST_CHECK_ALLCORRECT "Nessun errore"
+MSG_SELFTEST_CHECK_BED "Verifica letto"
+MSG_SELFTEST_CHECK_ENDSTOPS "Verifica finecorsa"
+MSG_SELFTEST_CHECK_HOTEND "Verifica ugello"  
+MSG_SELFTEST_CHECK_X "Verifica asse X"
+MSG_SELFTEST_CHECK_Y "Verifica asse Y"
+MSG_SELFTEST_CHECK_Z "Verifica asse Z"
+MSG_SELFTEST_MOTOR "Motore"
+MSG_SELFTEST_NOTCONNECTED "Non connesso"
+MSG_SELFTEST_OK "Autotest OK"
+MSG_SELFTEST_PLEASECHECK "Verificare:"	
+MSG_SELFTEST_START "Avvia autotest"
+MSG_SELFTEST_WIRINGERROR "Errore cablaggio"
+MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
+MSG_SET_HOME_OFFSETS "Set home offsets"
+MSG_SET_ORIGIN "Set origin"
+MSG_SET_TEMPERATURE "Imposta temperatura"
+MSG_SETTINGS "Impostazioni"
+MSG_SEVERE_SKEW "Inc. rilevante:"
+MSG_SHOW_END_STOPS "Stato finecorsa"
+MSG_SILENT_MODE_OFF "Mode      [forte]" 
+MSG_SILENT_MODE_ON "Modo [silenzioso]"
+MSG_SLIGHT_SKEW "Incl. leggera:"
+MSG_SPEED "Velocita"
+MSG_STATISTICS "Statistiche"
+MSG_STATS_FILAMENTUSED "Filamento usato:"
+MSG_STATS_PRINTTIME "Tempo di stampa:"
+MSG_STATS_TOTALFILAMENT "Filamento tot:"
+MSG_STATS_TOTALPRINTTIME "Tempo stampa tot:"
+MSG_STEPPER_TOO_HIGH "Steprate too high: "
+MSG_STOP_PRINT "Arresta stampa"
+MSG_STOPPED "ARRESTATO."
+MSG_STORE_EPROM "Store memory"
+MSG_SUPPORT "Support"
+MSG_SWITCH_PS_OFF "Switch power off"
+MSG_SWITCH_PS_ON "Switch power on"
+MSG_TAKE_EFFECT " per attualizzare"
+MSG_TEMP_CALIBRATION "Cal. temp.          "
+MSG_TEMP_CALIBRATION_DONE "Taratura temperatura terminata. Fare click per continuare."
+MSG_TEMP_CALIBRATION_OFF "Cal. temp. [OFF]"
+MSG_TEMP_CALIBRATION_ON "Cal. temp. [ON]"
+MSG_TEMPERATURE "Temperatura"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "SD card [normal]"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "SD card [FlshAir]"
+MSG_TUNE "Regola"
+MSG_UNLOAD_ALL "Rilasciare tutti"
+MSG_UNLOAD_FILAMENT "Scarica filamento"
+MSG_UNLOAD_FILAMENT_1 "Rilasciare fil. 1"
+MSG_UNLOAD_FILAMENT_2 "Rilasciare fil. 1"
+MSG_UNLOAD_FILAMENT_3 "Rilasciare fil. 1"
+MSG_UNLOAD_FILAMENT_4 "Rilasciare fil. 1"
+MSG_UNLOADING_FILAMENT "Rilasc. filamento"
+MSG_USB_PRINTING "Stampa da USB"
+MSG_USED "Usati nella stampa"
+MSG_USERWAIT "Attendendo utente"
+MSG_V2_CALIBRATION "Cal. primo layer."
+MSG_VOLUMETRIC "Filament"
+MSG_VOLUMETRIC_ENABLED "E in mm3"
+MSG_WAITING_TEMP "In attesa del raffreddamento della testina e del piatto"
+MSG_WATCH "Schermata info"
+MSG_WIZARD "Wizard"
+MSG_WIZARD_CALIBRATION_FAILED "Per favore consulta il nostro manuale per risolvere il problema. Poi riprendi il Wizard dopo aver riavviato la stampante."
+MSG_WIZARD_CLEAN_HEATBED "Per favore pulisci il piatto, poi premi la manopola."
+MSG_WIZARD_DONE "Ben fatto. Buona stampa!"
+MSG_WIZARD_FILAMENT_LOADED "Il filamento e stato caricato?"
+MSG_WIZARD_HEATING "Sto preriscaldando l'ugello. Per favore attendi."
+MSG_WIZARD_INSERT_CORRECT_FILAMENT "Per favore carica filamento di PLA e riprendi il Wizard dopo aver riavviato la stampante."
+MSG_WIZARD_LOAD_FILAMENT "Per favore inserisci il filamento di PLA nell'estrusore, poi premi la manopola per caricare."
+MSG_WIZARD_PLA_FILAMENT "E questo un filamento di PLA?"
+MSG_WIZARD_QUIT "E possibile proseguire la guide Wizard in qualsiasi momento attraverso Calibrazione -> Wizard."
+MSG_WIZARD_REPEAT_V2_CAL "Desideri ripetere l'ultimo passaggio per migliorare la distanza fra ugello e piatto?"
+MSG_WIZARD_RERUN "Se avvi il Wizard perderai la calibrazione preesistente e dovrai ricominciare dall'inizio. Continuare?"
+MSG_WIZARD_SELFTEST "Anzitutto avviero il Self Test per controllare gli errori di assemblaggio piu comuni."
+MSG_WIZARD_V2_CAL "Adesso tarero lo stacco fra ugello e superfice del piatto."
+MSG_WIZARD_V2_CAL_2 "Adesso iniziero a stampare una linea e tu dovrai abbassare l'ugello poco per volta ruotando la manopola sino a raggiungere una altezza ottimale. Per favore dai uno sguardo all'immagine del nostro manuale, cap.Calibrazione."
+MSG_WIZARD_WELCOME "Ciao, sono la tua stampante Original Prusa i3. Gradiresti aiuto attraverso il processo di configurazione?"
+MSG_WIZARD_WILL_PREHEAT "Adesso preriscaldero l'ugello per PLA."
+MSG_WIZARD_XYZ_CAL "Adesso avviero una Calibrazione XYZ. Puo durare circa 12 min."
+MSG_WIZARD_Z_CAL "Adesso avviero una Calibrazione Z."
+MSG_XYZ_DETAILS "XYZ Cal. dettagli"
+MSG_Y_DISTANCE_FROM_MIN "Distanza Y da min:"
+MSG_YES "Si"
+MSG_ZPROBE_OUT "Z probe out. bed"
+MSG_ZPROBE_ZOFFSET "Z Offset"
+WELCOME_MSG CUSTOM_MENDEL_NAME " pronta."

lang_upgrade/msgs_pl.txt

@@ -0,0 +1,295 @@
+MSG_ADJUSTZ "Autodostroic Z?"
+MSG_ALL "Wszystko"
+MSG_AUTO_HOME "Auto home"
+MSG_BABYSTEP_X "Babystep X"
+MSG_BABYSTEP_Y "Babystep Y"
+MSG_BABYSTEP_Z "Dostrojenie osy Z" 
+MSG_BABYSTEP_Z_NOT_SET "Odleglosc dyszy od podkladki nie jest skalibrowana. Postepuj zgodnie z instrukcja rozdzial Zaczynamy, podrozdzial Kalibracja pierwszej warstwy."
+MSG_BABYSTEPPING_X "Babystepping X"
+MSG_BABYSTEPPING_Y "Babystepping Y"
+MSG_BABYSTEPPING_Z "Dostrojenie Z"
+MSG_BED "Stolik"
+MSG_BED_CORRECTION_FRONT "Do przodu [um]"
+MSG_BED_CORRECTION_LEFT "W lewo  [um]"
+MSG_BED_CORRECTION_MENU "Korekta podkladki"
+MSG_BED_CORRECTION_REAR "Do tylu  [um]"
+MSG_BED_CORRECTION_RESET "Reset"
+MSG_BED_CORRECTION_RIGHT "W prawo [um]"
+MSG_BED_DONE "Stolik OK."
+MSG_BED_HEATING "Grzanie stolika.."
+MSG_BED_LEVELING_FAILED_POINT_HIGH "Kalibracja Z nieudana. Sensor dotk. za wysoko. Czekam na reset."
+MSG_BED_LEVELING_FAILED_POINT_LOW "Kalibracja nieudana. Sensor nie dotknal. Zanieczysz. dysza? Czekam na reset."
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED "Kalibracja nieudana. Sensor odlaczony lub uszkodz. kabel. Czekam na reset."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "Kalibr. XYZ nieudana. Przed. punkty kalibr. zbyt do przodu. Wyrownac drukarke."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "Kalibr. XYZ nieudana. Lewy przedni punkt zbyt do przodu. Wyrownac drukarke."
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "Kalibr. XYZ nieudana. Prawy przedni punkt zbyt do przodu. Wyrownac drukarke."
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "Kalibracja XYZ niepowiedziona. Sprawdzic w instrukcji."
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "Kalibracja XYZ ok. Osie X/Y sa prostopadle. Gratulacje!"
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "Kalibr. XYZ nieudana. Kalibracyjny punkt podkladki nieznaleziony."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "Kalibracja XYZ prawidlowa. Skosy beda automatycznie wyrownane przy druku."
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "Kalibracja XYZ prawidlowa. Osie X/Y lekko skosne. Dobra robota!"
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "Kalibr. XYZ niedokladna. Przednie punkty kalibr. Zbyt wys. do przodu."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "Kalibracja XYZ niedokladna. Lewy przedni punkt zbyt wysuniety do przodu."
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "Kalibracja XYZ niedokladna. Prawy przedni punkt zbyt wysuniety do przodu."
+MSG_BEGIN_FILE_LIST "Begin file list"
+MSG_CALIBRATE_BED "Kalibracja XYZ"
+MSG_CALIBRATE_BED_RESET "Reset kalibr. XYZ"
+MSG_CALIBRATE_E "Kalibruj E"
+MSG_CALIBRATE_PINDA "Skalibrowac"
+MSG_CALIBRATION_PINDA_MENU "Cieplna kalibr."
+MSG_CARD_MENU "Druk z SD"
+MSG_CLEAN_NOZZLE_E "Kalibracja E skonczona. Prosze oczyscic dysze. Potem potwierdzic przyciskiem. "
+MSG_CNG_SDCARD "Vymenit SD"
+MSG_CONFIGURATION_VER " Last Updated: "
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Oba wozki dojechaly do gornej ramy?"
+MSG_CONFIRM_NOZZLE_CLEAN "Dla prawidl. kalibracji prosze oczyscic dysze. Potw. guzikiem."
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ "Dla prawidlowej kalibracji prosze oczyscic dysze. Potem potwierdzic przyciskiem."
+MSG_CONTROL "Kontrola"
+MSG_COOLDOWN "Wychlodzic" 
+MSG_CORRECTLY "Wymiana ok?"
+MSG_CURRENT "Tylko aktualne"
+MSG_DATE "Data:"
+MSG_DISABLE_STEPPERS "Wylaczyc silniki"
+MSG_DWELL "Sleep..."
+MSG_E_CAL_KNOB "Prosze otaczac przycisk poki znacznik nie dosiegnie ciala ekstrudera. Potwierdzic przyciskiem."
+MSG_END_FILE_LIST "End file list"
+MSG_ENDSTOP_HIT "TRIGGERED"
+MSG_ENDSTOP_OPEN "open"
+MSG_ENDSTOPS_HIT "endstops hit: "
+MSG_Enqueing "enqueing \""
+MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: "
+MSG_ERR_KILLED "Printer halted. kill() called!"
+MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: "
+MSG_ERR_NO_THERMISTORS "No thermistors - no temperature"
+MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)"
+MSG_ERROR "BLAD:"
+MSG_EXTRUDER "Ekstruder"
+MSG_EXTRUDER_1 "Ekstruder 1"
+MSG_EXTRUDER_2 "Ekstruder 2"
+MSG_EXTRUDER_3 "Ekstruder 3"
+MSG_EXTRUDER_4 "Ekstruder 4"
+MSG_FACTOR " \002 Fact"
+MSG_FAN_SPEED "Predkosc went."
+MSG_FIL_ADJUSTING "Przebiega wyrownanie filamentow. Prosze czekac."
+MSG_FILAMENT_CLEAN "Czy kolor jest czysty?"
+MSG_FILAMENT_LOADING_T0 "Wloz filament do ekstrudera 1. Potwierdz przyciskiem."
+MSG_FILAMENT_LOADING_T1 "Wloz filament do ekstrudera 2. Potwierdz przyciskiem."
+MSG_FILAMENT_LOADING_T2 "Wloz filament do ekstrudera 3. Potwierdz przyciskiem."
+MSG_FILAMENT_LOADING_T3 "Wloz filament do ekstrudera 4. Potwierdz przyciskiem."
+MSG_FILAMENTCHANGE "Wymienic filament"
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION "Iteracja "
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Szukam punktu kalibracyjnego podkladki"
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 " z 4"
+MSG_FINISHING_MOVEMENTS "Konczenie druku"
+MSG_FLOW "Przeplyw"
+MSG_FLOW0 "Prutok 0"
+MSG_FLOW1 "Prutok 1"
+MSG_FLOW2 "Prutok 2"
+MSG_FOLLOW_CALIBRATION_FLOW "Drukarka nie zostala jeszcze skalibrowana. Prosze kierowac sie instrukcja, rozdzial Zaczynamy, podrozdzial Selftest."
+MSG_FREE_MEMORY " Free Memory: "
+MSG_HEATING "Grzanie..."
+MSG_HEATING_COMPLETE "Grzanie OK."
+MSG_HOMEYZ "Kalibruj Z"
+MSG_HOMEYZ_DONE "Kalibracja OK"
+MSG_HOMEYZ_PROGRESS "Kalibruje Z"
+MSG_CHANGE_EXTR "Zmienic ekstruder"
+MSG_CHANGE_SUCCESS "Wymiana ok!"
+MSG_CHANGING_FILAMENT "Wymiana filamentu"
+MSG_CHOOSE_EXTRUDER "Wybierz ekstruder"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Poprawiam precyzyjnosc punktu kalibracyjnego"
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 " z 4"
+MSG_INIT_SDCARD "Inic. SD"
+MSG_INSERT_FILAMENT "Wprowadz filament"
+MSG_KILLED "KILLED. "
+MSG_LANGUAGE_NAME "Polski"
+MSG_LANGUAGE_SELECT "Wybor jezyka"
+MSG_LEFT "Lewy:"
+MSG_LOAD_ALL "Zalad. wszystkie"
+MSG_LOAD_EPROM "Ulozit pamet"
+MSG_LOAD_FILAMENT "Wprowadz filament"
+MSG_LOAD_FILAMENT_1 "Zaladowac fil. 1"
+MSG_LOAD_FILAMENT_2 "Zaladowac fil. 2"
+MSG_LOAD_FILAMENT_3 "Zaladowac fil. 3"
+MSG_LOAD_FILAMENT_4 "Zaladowac fil. 4"
+MSG_LOADING_COLOR "Czyszcz. koloru"
+MSG_LOADING_FILAMENT "Wprow. filamentu"
+MSG_LOOSE_PULLEY "Kolo pasowe"
+MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+MSG_M117_V2_CALIBRATION "M117 Kal. 1. warstwy"
+MSG_M119_REPORT "Reporting endstop status"
+MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder "
+MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder "
+MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder "
+MSG_MAIN "Menu glowne" 
+MSG_MARK_FIL "Prosze oznaczyc filament 100 mm od ciala ekstrudera. Potwierdzic przyciskiem."
+MSG_MAX " \002 Max"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 "Okreslam wysokosc odniesienia punktu kalibracyjnego"
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 " z 9"
+MSG_MEASURED_SKEW "Zmier. sciecie:"
+MSG_MENU_CALIBRATION "Kalibracja"
+MSG_MESH_BED_LEVELING "Mesh Bed Leveling"
+MSG_MIN " \002 Min"
+MSG_MOVE_AXIS "Ruch osi"
+MSG_MOVE_CARRIAGE_TO_THE_TOP "Kalibracja XYZ. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z "Kalibracja Z. Przekrec galke, aby przesunac os Z do gornych krancowek. Nacisnij, by potwierdzic."
+MSG_MOVE_E "Extruder"
+MSG_MOVE_X "Przesunac X"
+MSG_MOVE_Y "Przesunac Y"
+MSG_MOVE_Z "Przesunac Z"
+MSG_NEW_FIRMWARE_AVAILABLE "Wyszla nowa wersja firmware:"
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE "Prosze zaktualizowac"
+MSG_NO "Nie"
+MSG_NO_CARD "Brak karty SD"
+MSG_NO_MOVE "No move."
+MSG_NOT_COLOR "Kolor zanieczysz."
+MSG_NOT_LOADED "Brak filamentu"
+MSG_NOZZLE "Dysza"
+MSG_NOZZLE1 "Tryska2"
+MSG_NOZZLE2 "Tryska3"
+MSG_OK "ok"
+MSG_PAPER "Umiesc kartke papieru na podkladce i trzymaj pod dysza podczas pomiaru pierwszych 4 punktow. Jesli dysza zahaczy o papier, wylacz drukarke."
+MSG_PAUSE_PRINT "Przerwac druk"
+MSG_PICK_Z "Vyberte vytisk"
+MSG_PID_EXTRUDER "Kalibracja PID"
+MSG_PID_FINISHED "Kal. PID zakonczona"
+MSG_PID_RUNNING "Kal. PID"
+MSG_PINDA_NOT_CALIBRATED "Cieplna kalibracja nie byla przeprowadzona"
+MSG_PINDA_PREHEAT "Grzanie PINDA"
+MSG_PLA_FILAMENT_LOADED "Fialment PLA jest zaladowany?"
+MSG_PLANNER_BUFFER_BYTES "  PlannerBufferBytes: "
+MSG_PLEASE_LOAD_PLA "Prosze, najpierw zaladuj filament PLA."
+MSG_PLEASE_WAIT "Prosze czekac"
+MSG_POWERUP "PowerUp"
+MSG_PREHEAT "Grzanie"
+MSG_PREHEAT_NOZZLE "Nagrzej dysze!"
+MSG_PREPARE_FILAMENT "Przygotuj filament"
+MSG_PREPARE_FILAMENT "Przygotuj filament"
+MSG_PRESS "Nacisnij przycisk"
+MSG_PRINT_ABORTED "Druk przerwany"
+MSG_PRINT_PAUSED "Druk zatrzymany"
+MSG_PRUSA3D "prusa3d.cz"
+MSG_PRUSA3D_FORUM "forum.prusa3d.cz"
+MSG_PRUSA3D_HOWTO "howto.prusa3d.cz"
+MSG_REBOOT "Restart drukarki"
+MSG_REFRESH "\xF8" "Obnovit"
+MSG_RESEND "Resend: "
+MSG_RESTORE_FAILSAFE "Obnovit vychozi"
+MSG_RESUME_PRINT "Kontynuowac"
+MSG_RESUMING "Wznowienie druku"
+MSG_RESUMING_PRINT "Wznawianie druku"
+MSG_RIGHT "Prawy:"
+MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: "
+MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+MSG_SD_CARD_OK "SD card ok"
+MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+MSG_SD_FILE_OPENED "File opened: "
+MSG_SD_FILE_SELECTED "File selected"
+MSG_SD_INIT_FAIL "SD init fail"
+MSG_SD_INSERTED "Karta wlozona"
+MSG_SD_NOT_PRINTING "Not SD printing"
+MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+MSG_SD_OPENROOT_FAIL "openRoot failed"
+MSG_SD_PRINTING_BYTE "SD printing byte "
+MSG_SD_REMOVED "Karta wyjeta"
+MSG_SD_VOL_INIT_FAIL "volume.init failed"
+MSG_SD_WORKDIR_FAIL "workDir open failed"
+MSG_SD_WRITE_TO_FILE "Writing to file: "
+MSG_SELFTEST "Selftest         "
+MSG_SELFTEST_BEDHEATER "Bed / Heater"
+MSG_SELFTEST_COOLING_FAN "Przedni went. druku?"
+MSG_SELFTEST_ENDSTOP "Endstop"
+MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit"
+MSG_SELFTEST_ENDSTOPS "Endstops"
+MSG_SELFTEST_ERROR "Selftest error !"
+MSG_SELFTEST_EXTRUDER_FAN "Lewy went na dysze?"
+MSG_SELFTEST_FAILED "Selftest nieudany"
+MSG_SELFTEST_FAN "Test wentylatora"
+MSG_SELFTEST_FAN_NO "Nie kreci sie"
+MSG_SELFTEST_FAN_YES "Kreci sie"
+MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor"
+MSG_SELFTEST_CHECK_ALLCORRECT "Wszystko OK      "
+MSG_SELFTEST_CHECK_BED "Kontrola bed     "
+MSG_SELFTEST_CHECK_ENDSTOPS "Kontrola endstops"
+MSG_SELFTEST_CHECK_HOTEND "Kontrola hotend  " 
+MSG_SELFTEST_CHECK_X "Kontrola X axis  "
+MSG_SELFTEST_CHECK_Y "Kontrola Y axis  "
+MSG_SELFTEST_CHECK_Z "Kontrola Z axis  "
+MSG_SELFTEST_MOTOR "Silnik"
+MSG_SELFTEST_NOTCONNECTED "Nie podlaczono   "
+MSG_SELFTEST_OK "Self test OK"
+MSG_SELFTEST_PLEASECHECK "Skontroluj :"   
+MSG_SELFTEST_START "Self test start  "
+MSG_SELFTEST_WIRINGERROR "Blad polaczenia"
+MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure"
+MSG_SET_HOME_OFFSETS "Nastav pocatek home"
+MSG_SET_ORIGIN "Nastav pocatek"
+MSG_SET_TEMPERATURE "Ustawic temperature"
+MSG_SETTINGS "Ustawienia"
+MSG_SEVERE_SKEW "Ostre sciecie:"
+MSG_SHOW_END_STOPS "Pokaz krancowki"
+MSG_SILENT_MODE_OFF "Tryb[w wydajnosc]"
+MSG_SILENT_MODE_ON "Tryb      [cichy]"
+MSG_SLIGHT_SKEW "Lekkie sciecie:"
+MSG_SPEED "Predkosc"
+MSG_STATISTICS "Statystyka  "
+MSG_STATS_FILAMENTUSED "Filament :  "
+MSG_STATS_PRINTTIME "Czas druku :  "
+MSG_STATS_TOTALFILAMENT "Filament lacznie :"
+MSG_STATS_TOTALPRINTTIME "Czas calkowity :"
+MSG_STEPPER_TOO_HIGH "Steprate too high: "
+MSG_STOP_PRINT "Zatrzymac druk"
+MSG_STOPPED "STOPPED. "
+MSG_STORE_EPROM "Store memory"
+MSG_SUPPORT "Pomoc" 
+MSG_SWITCH_PS_OFF "Zapnout zdroj"
+MSG_SWITCH_PS_ON "Vypnout zdroj"
+MSG_TAKE_EFFECT " wprow. zmian"   
+MSG_TEMP_CALIBRATION "Ciepl. kal.         "
+MSG_TEMP_CALIBRATION_DONE "Cieplna kalibracja zakonczona. Kontynuuj przyciskiem"
+MSG_TEMP_CALIBRATION_OFF "Ciepl. kal. [OFF]"
+MSG_TEMP_CALIBRATION_ON "Ciepl. kal. [ON]"
+MSG_TEMPERATURE "Temperatura"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF "karta SD [normal]"
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON "karta SD[FlshAir]"
+MSG_TUNE "Nastroic"
+MSG_UNLOAD_ALL "Wyjac wszystkie"
+MSG_UNLOAD_FILAMENT "Wyjac filament"
+MSG_UNLOAD_FILAMENT_1 "Wyjac filament 1"
+MSG_UNLOAD_FILAMENT_2 "Wyjac filament 2"
+MSG_UNLOAD_FILAMENT_3 "Wyjac filament 3"
+MSG_UNLOAD_FILAMENT_4 "Wyjac filament 4"
+MSG_UNLOADING_FILAMENT "Wysuwam filament"
+MSG_USB_PRINTING "Druk z USB  "
+MSG_USED "Uzyte przy druku"
+MSG_USERWAIT "Wait for user..."
+MSG_V2_CALIBRATION "Kal. 1. warstwy"
+MSG_VOLUMETRIC "Filament"
+MSG_VOLUMETRIC_ENABLED "E in mm3"
+MSG_WAITING_TEMP "Oczekiwanie na wychlodzenie dyszy i podkladki."
+MSG_WATCH "Informacje"
+MSG_WIZARD "Wizard"
+MSG_WIZARD_CALIBRATION_FAILED "Prosze sprawdz nasz poradnik i napraw problem. Potem przywroc Wizard restartujac drukarke."
+MSG_WIZARD_CLEAN_HEATBED "Prosze oczysc stolik i nacisnij guzik."
+MSG_WIZARD_DONE "Gotowe. Udanego druku!"
+MSG_WIZARD_FILAMENT_LOADED "Filament jest zaladowany?"
+MSG_WIZARD_HEATING "Nagrzewanie dyszy. Prosze czekac."
+MSG_WIZARD_INSERT_CORRECT_FILAMENT "Prosze zaladuj filament PLA i przywroc Wizard przez restart drukarki."
+MSG_WIZARD_LOAD_FILAMENT "Prosze umiesc filament PLA w ekstruderze i nacisnij przycisk by zaladowac."
+MSG_WIZARD_PLA_FILAMENT "Czy to filament PLA?"
+MSG_WIZARD_QUIT "Zawsze mozesz przywrocic Wizard przez Kalibracja -> Wizard."
+MSG_WIZARD_REPEAT_V2_CAL "Chcesz powtorzyc ostatni krok i przestawic odleglosc miedzy dysza a stolikiem?"
+MSG_WIZARD_RERUN "Wlaczenie Wizard usunie obecne dane kalibracyjne i zacznie od nowa. Kontynuowac?"
+MSG_WIZARD_SELFTEST "Najpierw wlacze autotest w celu kontrolli najczestszych problemow z montazem."
+MSG_WIZARD_V2_CAL "Kalibruje odleglosc miedzy koncowka dyszy a stolikiem."
+MSG_WIZARD_V2_CAL_2 "Zaczne drukowac linie. Stopniowo opuszczaj dysze przekrecajac guzik, poki nie uzyskasz optymalnej wysokosci. Sprawdz obrazki w naszym poradniku w rozdz. Kalibracja"
+MSG_WIZARD_WELCOME "Czesc, jestem Twoja drukarka Original Prusa i3. Czy potrzebujesz pomocy z instalacja?"
+MSG_WIZARD_WILL_PREHEAT "Nagrzewam dysze dla PLA."
+MSG_WIZARD_XYZ_CAL "Wlaczam kalibracje xyz. Zajmie to ok. 12 min."
+MSG_WIZARD_Z_CAL "Wlaczam kalibracje z."
+MSG_XYZ_DETAILS "Szczegoly kal.XYZ"
+MSG_Y_DISTANCE_FROM_MIN "Odleglosc Y od min.:"
+MSG_YES "Tak"
+WELCOME_MSG CUSTOM_MENDEL_NAME " gotowa"

lang_upgrade/msgs_usage.txt

@@ -0,0 +1,399 @@
+MSG_BABYSTEP_X 0
+MSG_BABYSTEP_Y 0
+MSG_CONFIRM_NOZZLE_CLEAN_FIL_ADJ 0
+MSG_CONTROL 0
+MSG_CRASH_DETECTED2 0
+MSG_FIL_ADJUSTING 0
+MSG_FLOW0 0
+MSG_FLOW1 0
+MSG_FLOW2 0
+MSG_FW_VERSION_RC 0
+MSG_INFO_FILAMENT_XDIFF 0
+MSG_INFO_FILAMENT_YDIFF 0
+MSG_LANGUAGE_NAME 0
+MSG_LOAD_EPROM 0
+MSG_MOTION 0
+MSG_REBOOT 0
+MSG_RECTRACT 0
+MSG_RESTORE_FAILSAFE 0
+MSG_SD_NOT_PRINTING 0
+MSG_SERIAL_ERROR_MENU_STRUCTURE 0
+MSG_SET_HOME_OFFSETS 0
+MSG_SET_ORIGIN 0
+MSG_STEPPER_TIMER_OVERFLOW_ERROR 0
+MSG_STORE_EPROM 0
+MSG_SWITCH_PS_OFF 0
+MSG_SWITCH_PS_ON 0
+MSG_TAKE_EFFECT 0
+MSG_USB_PRINTING 0
+MSG_VOLUMETRIC 0
+MSG_VOLUMETRIC_ENABLED 0
+MSG_ACTIVE_EXTRUDER 1
+MSG_ADJUSTZ 1
+MSG_AUTHOR 1
+MSG_AUTOLOAD_FILAMENT 1
+MSG_AUTOLOADING_ENABLED 1
+MSG_AUTOLOADING_ONLY_IF_FSENS_ON 1
+MSG_BABYSTEPPING_X 1
+MSG_BABYSTEPPING_Y 1
+MSG_BABYSTEPPING_Z 1
+MSG_BED_CORRECTION_FRONT 1
+MSG_BED_CORRECTION_LEFT 1
+MSG_BED_CORRECTION_MENU 1
+MSG_BED_CORRECTION_REAR 1
+MSG_BED_CORRECTION_RESET 1
+MSG_BED_CORRECTION_RIGHT 1
+MSG_BED_HEATING_SAFETY_DISABLED 1
+MSG_BED_LEVELING_FAILED_POINT_HIGH 1
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED 1
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR 1
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR 1
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR 1
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT 1
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND 1
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME 1
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD 1
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR 1
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR 1
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR 1
+MSG_BEGIN_FILE_LIST 1
+MSG_CALIBRATE_BED 1
+MSG_CALIBRATE_BED_RESET 1
+MSG_CALIBRATE_E 1
+MSG_CALIBRATE_PINDA 1
+MSG_CALIBRATION_PINDA_MENU 1
+MSG_CLEAN_NOZZLE_E 1
+MSG_CNG_SDCARD 1
+MSG_CONFIGURATION_VER 1
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP 1
+MSG_CORRECTLY 1
+MSG_COUNT_X 1
+MSG_CRASH_DET_ONLY_IN_NORMAL 1
+MSG_CRASH_DET_STEALTH_FORCE_OFF 1
+MSG_CURRENT 1
+MSG_DATE 1
+MSG_DEFAULT_SETTINGS_LOADED 1
+MSG_DISABLE_STEPPERS 1
+MSG_DWELL 1
+MSG_E_CAL_KNOB 1
+MSG_END_FILE_LIST 1
+MSG_ERR_COLD_EXTRUDE_STOP 1
+MSG_ERR_CHECKSUM_MISMATCH 1
+MSG_ERR_KILLED 1
+MSG_ERR_LINE_NO 1
+MSG_ERR_LONG_EXTRUDE_STOP 1
+MSG_ERR_NO_CHECKSUM 1
+MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM 1
+MSG_ERR_NO_THERMISTORS 1
+MSG_EXTRUDER_1 1
+MSG_EXTRUDER_2 1
+MSG_EXTRUDER_3 1
+MSG_EXTRUDER_4 1
+MSG_EXTRUDER_CORRECTION 1
+MSG_EXTRUDER_CORRECTION_OFF 1
+MSG_FACTOR 1
+MSG_FANS_CHECK_OFF 1
+MSG_FANS_CHECK_ON 1
+MSG_FILAMENT_SENSOR 1
+MSG_FILE_CNT 1
+MSG_FILE_INCOMPLETE 1
+MSG_FILE_PRINTED 1
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION 1
+MSG_FLOW 1
+MSG_FORCE_SELFTEST 1
+MSG_FREE_MEMORY 1
+MSG_FSENS_AUTOLOAD_OFF 1
+MSG_FSENS_AUTOLOAD_ON 1
+MSG_FSENS_NOT_RESPONDING 1
+MSG_FSENSOR_NA 1
+MSG_FW_VERSION_ALPHA 1
+MSG_FW_VERSION_BETA 1
+MSG_FW_VERSION_UNKNOWN 1
+MSG_HOMEYZ_DONE 1
+MSG_HOMEYZ_PROGRESS 1
+MSG_CHANGE_EXTR 1
+MSG_CHANGE_SUCCESS 1
+MSG_CHANGED_BOTH 1
+MSG_CHANGED_MOTHERBOARD 1
+MSG_CHANGED_PRINTER 1
+MSG_CHANGING_FILAMENT 1
+MSG_CHECK_IDLER 1
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 1
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 1
+MSG_INFO_EXTRUDER 1
+MSG_INFO_NOZZLE_FAN 1
+MSG_INFO_PRINT_FAN 1
+MSG_INIT_SDCARD 1
+MSG_INSERT_FILAMENT 1
+MSG_INVALID_EXTRUDER 1
+MSG_KILLED 1
+MSG_LANGUAGE_SELECT 1
+MSG_LEFT 1
+MSG_LOAD_ALL 1
+MSG_LOAD_FILAMENT_1 1
+MSG_LOAD_FILAMENT_2 1
+MSG_LOAD_FILAMENT_3 1
+MSG_LOAD_FILAMENT_4 1
+MSG_LOADING_COLOR 1
+MSG_LOOSE_PULLEY 1
+MSG_M104_INVALID_EXTRUDER 1
+MSG_M105_INVALID_EXTRUDER 1
+MSG_M109_INVALID_EXTRUDER 1
+MSG_M119_REPORT 1
+MSG_M200_INVALID_EXTRUDER 1
+MSG_M218_INVALID_EXTRUDER 1
+MSG_M221_INVALID_EXTRUDER 1
+MSG_MARK_FIL 1
+MSG_MAX 1
+MSG_MEASURED_OFFSET 1
+MSG_MEASURED_SKEW 1
+MSG_MENU_BELT_STATUS 1
+MSG_MENU_TEMPERATURES 1
+MSG_MENU_VOLTAGES 1
+MSG_MESH_BED_LEVELING 1
+MSG_MIN 1
+MSG_MOVE_AXIS 1
+MSG_MOVE_CARRIAGE_TO_THE_TOP 1
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z 1
+MSG_MOVE_E 1
+MSG_MOVE_X 1
+MSG_MOVE_Y 1
+MSG_MOVE_Z 1
+MSG_NEW_FIRMWARE_AVAILABLE 1
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE 1
+MSG_NO_CARD 1
+MSG_NO_MOVE 1
+MSG_NOT_COLOR 1
+MSG_NOT_LOADED 1
+MSG_NOZZLE1 1
+MSG_NOZZLE2 1
+MSG_PAUSE_PRINT 1
+MSG_PICK_Z 1
+MSG_PID_EXTRUDER 1
+MSG_PID_FINISHED 1
+MSG_PID_RUNNING 1
+MSG_PINDA_NOT_CALIBRATED 1
+MSG_PINDA_PREHEAT 1
+MSG_PLA_FILAMENT_LOADED 1
+MSG_PLANNER_BUFFER_BYTES 1
+MSG_PLEASE_LOAD_PLA 1
+MSG_PREHEAT 1
+MSG_PREPARE_FILAMENT 1
+MSG_PRESS 1
+MSG_PRESS_TO_PREHEAT 1
+MSG_PRINT_PAUSED 1
+MSG_PRINTER_DISCONNECTED 1
+MSG_PRUSA3D 1
+MSG_PRUSA3D_FORUM 1
+MSG_PRUSA3D_HOWTO 1
+MSG_RECOVERING_PRINT 1
+MSG_RESEND 1
+MSG_RESUME_PRINT 1
+MSG_RESUMING 1
+MSG_RESUMING_PRINT 1
+MSG_RIGHT 1
+MSG_SD_CANT_ENTER_SUBDIR 1
+MSG_SD_CANT_OPEN_SUBDIR 1
+MSG_SD_CARD_OK 1
+MSG_SD_FILE_OPENED 1
+MSG_SD_FILE_SELECTED 1
+MSG_SD_INIT_FAIL 1
+MSG_SD_INSERTED 1
+MSG_SD_OPENROOT_FAIL 1
+MSG_SD_PRINTING_BYTE 1
+MSG_SD_REMOVED 1
+MSG_SD_SIZE 1
+MSG_SD_VOL_INIT_FAIL 1
+MSG_SD_WRITE_TO_FILE 1
+MSG_SECOND_SERIAL_OFF 1
+MSG_SECOND_SERIAL_ON 1
+MSG_SELFTEST 1
+MSG_SELFTEST_AXIS 1
+MSG_SELFTEST_AXIS_LENGTH 1
+MSG_SELFTEST_BEDHEATER 1
+MSG_SELFTEST_ENDSTOP 1
+MSG_SELFTEST_ENDSTOP_NOTHIT 1
+MSG_SELFTEST_ENDSTOPS 1
+MSG_SELFTEST_ERROR 1
+MSG_SELFTEST_EXTRUDER_FAN_SPEED 1
+MSG_SELFTEST_FANS 1
+MSG_SELFTEST_FILAMENT_SENSOR 1
+MSG_SELFTEST_HEATERTHERMISTOR 1
+MSG_SELFTEST_CHECK_ALLCORRECT 1
+MSG_SELFTEST_CHECK_ENDSTOPS 1
+MSG_SELFTEST_CHECK_HOTEND 1
+MSG_SELFTEST_CHECK_X 1
+MSG_SELFTEST_CHECK_Y 1
+MSG_SELFTEST_CHECK_Z 1
+MSG_SELFTEST_NOTCONNECTED 1
+MSG_SELFTEST_OK 1
+MSG_SELFTEST_PLEASECHECK 1
+MSG_SELFTEST_PRINT_FAN_SPEED 1
+MSG_SELFTEST_START 1
+MSG_SELFTEST_SWAPPED 1
+MSG_SET_TEMPERATURE 1
+MSG_SEVERE_SKEW 1
+MSG_SHOW_END_STOPS 1
+MSG_SLIGHT_SKEW 1
+MSG_SORT_ALPHA 1
+MSG_SORT_NONE 1
+MSG_SORT_TIME 1
+MSG_SORTING 1
+MSG_SPEED 1
+MSG_STACK_ERROR 1
+MSG_STATISTICS 1
+MSG_STATS_FILAMENTUSED 1
+MSG_STATS_PRINTTIME 1
+MSG_STATS_TOTALFILAMENT 1
+MSG_STATS_TOTALPRINTTIME 1
+MSG_STEPPER_TOO_HIGH 1
+MSG_SUPPORT 1
+MSG_TEMP_CAL_FAILED 1
+MSG_TEMP_CAL_WARNING 1
+MSG_TEMP_CALIBRATION_OFF 1
+MSG_TEMP_CALIBRATION_ON 1
+MSG_TEMPERATURE 1
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF 1
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON 1
+MSG_TUNE 1
+MSG_UNLOAD_ALL 1
+MSG_UNLOAD_FILAMENT_1 1
+MSG_UNLOAD_FILAMENT_2 1
+MSG_UNLOAD_FILAMENT_3 1
+MSG_UNLOAD_FILAMENT_4 1
+MSG_UNLOAD_SUCCESSFUL 1
+MSG_USED 1
+MSG_USERWAIT 1
+MSG_V2_CALIBRATION 1
+MSG_WAITING_TEMP 1
+MSG_WAITING_TEMP_PINDA 1
+MSG_WIZARD 1
+MSG_WIZARD_CLEAN_HEATBED 1
+MSG_WIZARD_FILAMENT_LOADED 1
+MSG_WIZARD_INSERT_CORRECT_FILAMENT 1
+MSG_WIZARD_LOAD_FILAMENT 1
+MSG_WIZARD_PLA_FILAMENT 1
+MSG_WIZARD_REPEAT_V2_CAL 1
+MSG_WIZARD_RERUN 1
+MSG_WIZARD_SELFTEST 1
+MSG_WIZARD_V2_CAL 1
+MSG_WIZARD_V2_CAL_2 1
+MSG_WIZARD_WELCOME 1
+MSG_WIZARD_WILL_PREHEAT 1
+MSG_WIZARD_XYZ_CAL 1
+MSG_WIZARD_Z_CAL 1
+MSG_X_MAX 1
+MSG_X_MIN 1
+MSG_XYZ_DETAILS 1
+MSG_Y_DISTANCE_FROM_MIN 1
+MSG_Y_MAX 1
+MSG_Y_MIN 1
+MSG_AUTO_HOME 2
+MSG_AUTO_MODE_ON 2
+MSG_BABYSTEP_Z 2
+MSG_BABYSTEP_Z_NOT_SET 2
+MSG_BED_DONE 2
+MSG_BED_HEATING 2
+MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED 2
+MSG_BROWNOUT_RESET 2
+MSG_CALIBRATE_Z_AUTO 2
+MSG_CONFIRM_NOZZLE_CLEAN 2
+MSG_COOLDOWN 2
+MSG_CRASH_DETECTED 2
+MSG_CRASHDETECT_NA 2
+MSG_CRASHDETECT_OFF 2
+MSG_CRASHDETECT_ON 2
+MSG_Enqueing 2
+MSG_ERR_STOPPED 2
+MSG_EXTERNAL_RESET 2
+MSG_FAN_SPEED 2
+MSG_FILAMENT_CLEAN 2
+MSG_FILAMENT_LOADING_T0 2
+MSG_FILAMENT_LOADING_T1 2
+MSG_FILAMENT_LOADING_T2 2
+MSG_FILAMENT_LOADING_T3 2
+MSG_FILAMENTCHANGE 2
+MSG_FILE_SAVED 2
+MSG_FINISHING_MOVEMENTS 2
+MSG_FOLLOW_CALIBRATION_FLOW 2
+MSG_FSENS_AUTOLOAD_NA 2
+MSG_FSENSOR_OFF 2
+MSG_FSENSOR_ON 2
+MSG_HEATING 2
+MSG_HEATING_COMPLETE 2
+MSG_HOMEYZ 2
+MSG_LOAD_FILAMENT 2
+MSG_M117_V2_CALIBRATION 2
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 2
+MSG_MENU_CALIBRATION 2
+MSG_NOZZLE 2
+MSG_PAPER 2
+MSG_PLACE_STEEL_SHEET 2
+MSG_POWERUP 2
+MSG_PRESS_TO_UNLOAD 2
+MSG_PULL_OUT_FILAMENT 2
+MSG_RECOVER_PRINT 2
+MSG_REMOVE_STEEL_SHEET 2
+MSG_SD_ERR_WRITE_TO_FILE 2
+MSG_SD_WORKDIR_FAIL 2
+MSG_SELFTEST_CHECK_BED 2
+MSG_SELFTEST_CHECK_FSENSOR 2
+MSG_SILENT_MODE_ON 2
+MSG_SOFTWARE_RESET 2
+MSG_STEALTH_MODE_OFF 2
+MSG_STEALTH_MODE_ON 2
+MSG_STOPPED 2
+MSG_TEMP_CALIBRATION_DONE 2
+MSG_UNKNOWN_COMMAND 2
+MSG_WATCH 2
+MSG_WATCHDOG_RESET 2
+MSG_WIZARD_DONE 2
+MSG_WIZARD_QUIT 2
+MSG_Z_MAX 2
+MSG_Z_MIN 2
+MSG_ZPROBE_OUT 2
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 3
+MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 3
+MSG_CHOOSE_EXTRUDER 3
+MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE2 3
+MSG_PRINT_ABORTED 3
+MSG_REFRESH 3
+MSG_SD_OPEN_FILE_FAIL 3
+MSG_SELFTEST_COOLING_FAN 3
+MSG_SELFTEST_EXTRUDER_FAN 3
+MSG_SELFTEST_FAILED 3
+MSG_SELFTEST_FAN_NO 3
+MSG_SELFTEST_FAN_YES 3
+MSG_SELFTEST_MOTOR 3
+MSG_STEEL_SHEET_CHECK 3
+MSG_STOP_PRINT 3
+MSG_TEMP_CALIBRATION 3
+MSG_UNLOAD_FILAMENT 3
+MSG_WIZARD_CALIBRATION_FAILED 3
+MSG_WIZARD_HEATING 3
+MSG_ZPROBE_ZOFFSET 3
+MSG_ENDSTOPS_HIT 4
+MSG_EXTRUDER 4
+MSG_ON 4
+MSG_POSITION_UNKNOWN 4
+MSG_SELFTEST_FAN 4
+MSG_SILENT_MODE_OFF 4
+MSG_UNLOADING_FILAMENT 4
+MSG_BED 5
+MSG_BED_LEVELING_FAILED_POINT_LOW 5
+MSG_LOADING_FILAMENT 5
+MSG_OFF 5
+MSG_SELFTEST_WIRINGERROR 5
+MSG_SETTINGS 5
+MSG_ALL 6
+MSG_ENDSTOP_HIT 6
+MSG_ENDSTOP_OPEN 6
+MSG_NO 6
+MSG_CARD_MENU 7
+MSG_PLEASE_WAIT 7
+MSG_YES 7
+MSG_OK 8
+MSG_ERROR 9
+MSG_PREHEAT_NOZZLE 9
+MSG_MAIN 12
+WELCOME_MSG 17

lang_upgrade/replace_common.out

@@ -0,0 +1,13 @@
+MSG_ACTIVE_EXTRUDER OK
+MSG_AUTHOR OK
+MSG_COUNT_X OK
+MSG_ERR_LINE_NO OK
+MSG_ERR_LONG_EXTRUDE_STOP OK
+MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM OK
+MSG_FILE_PRINTED OK
+MSG_INVALID_EXTRUDER OK
+MSG_SD_SIZE OK
+MSG_X_MAX OK
+MSG_X_MIN OK
+MSG_Y_MAX OK
+MSG_Y_MIN OK

lang_upgrade/replace_en.out

@@ -0,0 +1,247 @@
+MSG_ADJUSTZ OK
+MSG_AUTOLOAD_FILAMENT OK
+MSG_AUTOLOADING_ENABLED OK
+MSG_AUTOLOADING_ONLY_IF_FSENS_ON OK
+MSG_BABYSTEPPING_X OK
+MSG_BABYSTEPPING_Y OK
+MSG_BABYSTEPPING_Z OK
+MSG_BED_CORRECTION_FRONT OK
+MSG_BED_CORRECTION_LEFT OK
+MSG_BED_CORRECTION_MENU OK
+MSG_BED_CORRECTION_REAR OK
+MSG_BED_CORRECTION_RESET OK
+MSG_BED_CORRECTION_RIGHT OK
+MSG_BED_HEATING_SAFETY_DISABLED OK
+MSG_BED_LEVELING_FAILED_POINT_HIGH OK
+MSG_BED_LEVELING_FAILED_PROBE_DISCONNECTED OK
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR OK
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR OK
+MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR OK
+MSG_BED_SKEW_OFFSET_DETECTION_PERFECT OK
+MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND OK
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME OK
+MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD OK
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR OK
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR OK
+MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR OK
+MSG_BEGIN_FILE_LIST OK
+MSG_CALIBRATE_BED OK
+MSG_CALIBRATE_BED_RESET OK
+MSG_CALIBRATE_E OK
+MSG_CALIBRATE_PINDA OK
+MSG_CALIBRATION_PINDA_MENU OK
+MSG_CLEAN_NOZZLE_E OK
+MSG_CNG_SDCARD OK
+MSG_CONFIGURATION_VER OK
+MSG_CONFIRM_CARRIAGE_AT_THE_TOP OK
+MSG_CORRECTLY OK
+MSG_CRASH_DET_ONLY_IN_NORMAL OK
+MSG_CRASH_DET_STEALTH_FORCE_OFF OK
+MSG_CURRENT OK
+MSG_DATE OK
+MSG_DEFAULT_SETTINGS_LOADED OK
+MSG_DISABLE_STEPPERS OK
+MSG_DWELL OK
+MSG_E_CAL_KNOB OK
+MSG_END_FILE_LIST OK
+MSG_ERR_COLD_EXTRUDE_STOP OK
+MSG_ERR_CHECKSUM_MISMATCH OK
+MSG_ERR_KILLED OK
+MSG_ERR_NO_CHECKSUM OK
+MSG_ERR_NO_THERMISTORS OK
+MSG_EXTRUDER_1 OK
+MSG_EXTRUDER_2 OK
+MSG_EXTRUDER_3 OK
+MSG_EXTRUDER_4 OK
+MSG_EXTRUDER_CORRECTION OK
+MSG_EXTRUDER_CORRECTION_OFF OK
+MSG_FACTOR OK
+MSG_FANS_CHECK_OFF OK
+MSG_FANS_CHECK_ON OK
+MSG_FILAMENT_SENSOR OK
+MSG_FILE_CNT OK
+MSG_FILE_INCOMPLETE OK
+MSG_FIND_BED_OFFSET_AND_SKEW_ITERATION OK
+MSG_FLOW OK
+MSG_FORCE_SELFTEST OK
+MSG_FREE_MEMORY OK
+MSG_FSENS_AUTOLOAD_OFF OK
+MSG_FSENS_AUTOLOAD_ON OK
+MSG_FSENS_NOT_RESPONDING OK
+MSG_FSENSOR_NA OK
+MSG_FW_VERSION_ALPHA OK
+MSG_FW_VERSION_BETA OK
+MSG_FW_VERSION_UNKNOWN OK
+MSG_HOMEYZ_DONE OK
+MSG_HOMEYZ_PROGRESS OK
+MSG_CHANGE_EXTR OK
+MSG_CHANGE_SUCCESS OK
+MSG_CHANGED_BOTH OK
+MSG_CHANGED_MOTHERBOARD OK
+MSG_CHANGED_PRINTER OK
+MSG_CHANGING_FILAMENT OK
+MSG_CHECK_IDLER OK
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 OK
+MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 OK
+MSG_INFO_EXTRUDER OK
+MSG_INFO_NOZZLE_FAN OK
+MSG_INFO_PRINT_FAN OK
+MSG_INIT_SDCARD OK
+MSG_INSERT_FILAMENT OK
+MSG_KILLED OK
+MSG_LANGUAGE_SELECT OK
+MSG_LEFT OK
+MSG_LOAD_ALL OK
+MSG_LOAD_FILAMENT_1 OK
+MSG_LOAD_FILAMENT_2 OK
+MSG_LOAD_FILAMENT_3 OK
+MSG_LOAD_FILAMENT_4 OK
+MSG_LOADING_COLOR OK
+MSG_LOOSE_PULLEY OK
+MSG_M104_INVALID_EXTRUDER OK
+MSG_M105_INVALID_EXTRUDER OK
+MSG_M109_INVALID_EXTRUDER OK
+MSG_M119_REPORT OK
+MSG_M200_INVALID_EXTRUDER OK
+MSG_M218_INVALID_EXTRUDER OK
+MSG_M221_INVALID_EXTRUDER OK
+MSG_MARK_FIL OK
+MSG_MAX OK
+MSG_MEASURED_OFFSET OK
+MSG_MEASURED_SKEW OK
+MSG_MENU_BELT_STATUS OK
+MSG_MENU_TEMPERATURES OK
+MSG_MENU_VOLTAGES OK
+MSG_MESH_BED_LEVELING OK
+MSG_MIN OK
+MSG_MOVE_AXIS OK
+MSG_MOVE_CARRIAGE_TO_THE_TOP OK
+MSG_MOVE_CARRIAGE_TO_THE_TOP_Z OK
+MSG_MOVE_E OK
+MSG_MOVE_X OK
+MSG_MOVE_Y OK
+MSG_MOVE_Z OK
+MSG_NEW_FIRMWARE_AVAILABLE OK
+MSG_NEW_FIRMWARE_PLEASE_UPGRADE OK
+MSG_NO_CARD OK
+MSG_NO_MOVE OK
+MSG_NOT_COLOR OK
+MSG_NOT_LOADED OK
+MSG_NOZZLE1 OK
+MSG_NOZZLE2 OK
+MSG_PAUSE_PRINT OK
+MSG_PICK_Z OK
+MSG_PID_EXTRUDER OK
+MSG_PID_FINISHED OK
+MSG_PID_RUNNING OK
+MSG_PINDA_NOT_CALIBRATED OK
+MSG_PINDA_PREHEAT OK
+MSG_PLA_FILAMENT_LOADED OK
+MSG_PLANNER_BUFFER_BYTES OK
+MSG_PLEASE_LOAD_PLA OK
+MSG_PREHEAT OK
+MSG_PREPARE_FILAMENT OK
+MSG_PRESS OK
+MSG_PRESS_TO_PREHEAT OK
+MSG_PRINT_PAUSED OK
+MSG_PRINTER_DISCONNECTED OK
+MSG_PRUSA3D OK
+MSG_PRUSA3D_FORUM OK
+MSG_PRUSA3D_HOWTO OK
+MSG_RECOVERING_PRINT OK
+MSG_RESEND OK
+MSG_RESUME_PRINT OK
+MSG_RESUMING OK
+MSG_RESUMING_PRINT OK
+MSG_RIGHT OK
+MSG_SD_CANT_ENTER_SUBDIR OK
+MSG_SD_CANT_OPEN_SUBDIR OK
+MSG_SD_CARD_OK OK
+MSG_SD_FILE_OPENED OK
+MSG_SD_FILE_SELECTED OK
+MSG_SD_INIT_FAIL OK
+MSG_SD_INSERTED OK
+MSG_SD_OPENROOT_FAIL OK
+MSG_SD_PRINTING_BYTE OK
+MSG_SD_REMOVED OK
+MSG_SD_VOL_INIT_FAIL OK
+MSG_SD_WRITE_TO_FILE OK
+MSG_SECOND_SERIAL_OFF OK
+MSG_SECOND_SERIAL_ON OK
+MSG_SELFTEST OK
+MSG_SELFTEST_AXIS OK
+MSG_SELFTEST_AXIS_LENGTH OK
+MSG_SELFTEST_BEDHEATER OK
+MSG_SELFTEST_ENDSTOP OK
+MSG_SELFTEST_ENDSTOP_NOTHIT OK
+MSG_SELFTEST_ENDSTOPS OK
+MSG_SELFTEST_ERROR OK
+MSG_SELFTEST_EXTRUDER_FAN_SPEED OK
+MSG_SELFTEST_FANS OK
+MSG_SELFTEST_FILAMENT_SENSOR OK
+MSG_SELFTEST_HEATERTHERMISTOR OK
+MSG_SELFTEST_CHECK_ALLCORRECT OK
+MSG_SELFTEST_CHECK_ENDSTOPS OK
+MSG_SELFTEST_CHECK_HOTEND OK
+MSG_SELFTEST_CHECK_X OK
+MSG_SELFTEST_CHECK_Y OK
+MSG_SELFTEST_CHECK_Z OK
+MSG_SELFTEST_NOTCONNECTED OK
+MSG_SELFTEST_OK OK
+MSG_SELFTEST_PLEASECHECK OK
+MSG_SELFTEST_PRINT_FAN_SPEED OK
+MSG_SELFTEST_START OK
+MSG_SELFTEST_SWAPPED OK
+MSG_SET_TEMPERATURE OK
+MSG_SEVERE_SKEW OK
+MSG_SHOW_END_STOPS OK
+MSG_SLIGHT_SKEW OK
+MSG_SORT_ALPHA OK
+MSG_SORT_NONE OK
+MSG_SORT_TIME OK
+MSG_SORTING OK
+MSG_SPEED OK
+MSG_STACK_ERROR OK
+MSG_STATISTICS OK
+MSG_STATS_FILAMENTUSED OK
+MSG_STATS_PRINTTIME OK
+MSG_STATS_TOTALFILAMENT OK
+MSG_STATS_TOTALPRINTTIME OK
+MSG_STEPPER_TOO_HIGH OK
+MSG_SUPPORT OK
+MSG_TEMP_CAL_FAILED OK
+MSG_TEMP_CAL_WARNING OK
+MSG_TEMP_CALIBRATION_OFF OK
+MSG_TEMP_CALIBRATION_ON OK
+MSG_TEMPERATURE OK
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_OFF OK
+MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY_ON OK
+MSG_TUNE OK
+MSG_UNLOAD_ALL OK
+MSG_UNLOAD_FILAMENT_1 OK
+MSG_UNLOAD_FILAMENT_2 OK
+MSG_UNLOAD_FILAMENT_3 OK
+MSG_UNLOAD_FILAMENT_4 OK
+MSG_UNLOAD_SUCCESSFUL OK
+MSG_USED OK
+MSG_USERWAIT OK
+MSG_V2_CALIBRATION OK
+MSG_WAITING_TEMP OK
+MSG_WAITING_TEMP_PINDA OK
+MSG_WIZARD OK
+MSG_WIZARD_CLEAN_HEATBED OK
+MSG_WIZARD_FILAMENT_LOADED OK
+MSG_WIZARD_INSERT_CORRECT_FILAMENT OK
+MSG_WIZARD_LOAD_FILAMENT OK
+MSG_WIZARD_PLA_FILAMENT OK
+MSG_WIZARD_REPEAT_V2_CAL OK
+MSG_WIZARD_RERUN OK
+MSG_WIZARD_SELFTEST OK
+MSG_WIZARD_V2_CAL OK
+MSG_WIZARD_V2_CAL_2 OK
+MSG_WIZARD_WELCOME OK
+MSG_WIZARD_WILL_PREHEAT OK
+MSG_WIZARD_XYZ_CAL OK
+MSG_WIZARD_Z_CAL OK
+MSG_XYZ_DETAILS OK
+MSG_Y_DISTANCE_FROM_MIN OK