End file section for searching M84 in gcode file were enlarged (compatibility with mmu Slic3r)

Firmware/variants/1_75mm_MK2-RAMBo10a-E3Dv6full.h

@@ -420,7 +420,7 @@ THERMISTORS SETTINGS
 #define DEFAULT_RETRACTION 1 //used for PINDA temp calibration and pause print
 #endif
 
-#define END_FILE_SECTION 10000 //number of bytes from end of file used for checking if file is complete
+#define END_FILE_SECTION 20000 //number of bytes from end of file used for checking if file is complete
 
 // Safety timer
 #define SAFETYTIMER

Firmware/variants/1_75mm_MK2-RAMBo13a-E3Dv6full.h

@@ -420,7 +420,7 @@ THERMISTORS SETTINGS
 #define DEFAULT_RETRACTION 1 //used for PINDA temp calibration and pause print
 #endif
 
-#define END_FILE_SECTION 10000 //number of bytes from end of file used for checking if file is complete
+#define END_FILE_SECTION 20000 //number of bytes from end of file used for checking if file is complete
 
 // Safety timer
 #define SAFETYTIMER

Firmware/variants/1_75mm_MK25-RAMBo10a-E3Dv6full.h

@@ -95,7 +95,7 @@
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1
 

Firmware/variants/1_75mm_MK25-RAMBo13a-E3Dv6full.h

@@ -96,7 +96,7 @@
 #define MANUAL_FEEDRATE {2700, 2700, 1000, 100}   // set the speeds for manual moves (mm/min)
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1
 

Firmware/variants/1_75mm_MK3-EINSy10a-E3Dv6full.h

@@ -107,7 +107,7 @@
 #define NORMAL_MAX_FEEDRATE_XY   200  // max feedrate in mm/s
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1
 

Firmware/variants/1_75mm_MK3-MMU-EINSy10a-E3Dv6full.h

@@ -112,7 +112,7 @@
 //#define SIMPLE_ACCEL_LIMIT          //new limitation method for normal/silent
 
 //number of bytes from end of the file to start check
-#define END_FILE_SECTION 10000
+#define END_FILE_SECTION 20000
 
 #define Z_AXIS_ALWAYS_ON 1