Merge pull request #112 from PavelSindler/menu_corrections

Menu corrections, translation to Czech language

Firmware/Configuration_prusa.h

@@ -381,7 +381,7 @@ const bool Z_MIN_ENDSTOP_INVERTING = false; // set to true to invert the logic o
 #define FARM_PREHEAT_FAN_SPEED 0
 
 #define PLA_PREHEAT_HOTEND_TEMP 215
-#define PLA_PREHEAT_HPB_TEMP 55
+#define PLA_PREHEAT_HPB_TEMP 60
 #define PLA_PREHEAT_FAN_SPEED 0
 
 #define ABS_PREHEAT_HOTEND_TEMP 255

Firmware/language_all.cpp

@@ -279,8 +279,10 @@ const char * const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM] PROGMEM = {
 };
 
 const char MSG_CALIBRATE_Z_AUTO_EN[] PROGMEM = "Calibrating Z";
-const char * const MSG_CALIBRATE_Z_AUTO_LANG_TABLE[1] PROGMEM = {
-	MSG_CALIBRATE_Z_AUTO_EN
+const char MSG_CALIBRATE_Z_AUTO_CZ[] PROGMEM = "Kalibruji Z";
+const char * const MSG_CALIBRATE_Z_AUTO_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_CALIBRATE_Z_AUTO_EN,
+	MSG_CALIBRATE_Z_AUTO_CZ
 };
 
 const char MSG_CALIBRATION_PINDA_MENU_EN[] PROGMEM = "Temp. calibration";
@@ -388,13 +390,17 @@ const char * const MSG_COUNT_X_LANG_TABLE[1] PROGMEM = {
 };
 
 const char MSG_CRASHDETECT_OFF_EN[] PROGMEM = "Crash det.  [off]";
-const char * const MSG_CRASHDETECT_OFF_LANG_TABLE[1] PROGMEM = {
-	MSG_CRASHDETECT_OFF_EN
+const char MSG_CRASHDETECT_OFF_CZ[] PROGMEM = "Crash det.  [vyp]";
+const char * const MSG_CRASHDETECT_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_CRASHDETECT_OFF_EN,
+	MSG_CRASHDETECT_OFF_CZ
 };
 
 const char MSG_CRASHDETECT_ON_EN[] PROGMEM = "Crash det.   [on]";
-const char * const MSG_CRASHDETECT_ON_LANG_TABLE[1] PROGMEM = {
-	MSG_CRASHDETECT_ON_EN
+const char MSG_CRASHDETECT_ON_CZ[] PROGMEM = "Crash det.  [zap]";
+const char * const MSG_CRASHDETECT_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_CRASHDETECT_ON_EN,
+	MSG_CRASHDETECT_ON_CZ
 };
 
 const char MSG_CRASH_DETECTED_EN[] PROGMEM = "Crash detected. Continue printing?";
@@ -547,6 +553,20 @@ const char * const MSG_FACTOR_LANG_TABLE[1] PROGMEM = {
 	MSG_FACTOR_EN
 };
 
+const char MSG_FANS_CHECK_OFF_EN[] PROGMEM = "Fans check  [off]";
+const char MSG_FANS_CHECK_OFF_CZ[] PROGMEM = "Kontr. vent.[vyp]";
+const char * const MSG_FANS_CHECK_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_FANS_CHECK_OFF_EN,
+	MSG_FANS_CHECK_OFF_CZ
+};
+
+const char MSG_FANS_CHECK_ON_EN[] PROGMEM = "Fans check   [on]";
+const char MSG_FANS_CHECK_ON_CZ[] PROGMEM = "Kontr. vent.[zap]";
+const char * const MSG_FANS_CHECK_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_FANS_CHECK_ON_EN,
+	MSG_FANS_CHECK_ON_CZ
+};
+
 const char MSG_FAN_SPEED_EN[] PROGMEM = "Fan speed";
 const char MSG_FAN_SPEED_CZ[] PROGMEM = "Rychlost vent.";
 const char * const MSG_FAN_SPEED_LANG_TABLE[LANG_NUM] PROGMEM = {
@@ -681,13 +701,17 @@ const char * const MSG_FREE_MEMORY_LANG_TABLE[1] PROGMEM = {
 };
 
 const char MSG_FSENSOR_OFF_EN[] PROGMEM = "Fil. sensor [off]";
-const char * const MSG_FSENSOR_OFF_LANG_TABLE[1] PROGMEM = {
-	MSG_FSENSOR_OFF_EN
+const char MSG_FSENSOR_OFF_CZ[] PROGMEM = "Fil. senzor [vyp]";
+const char * const MSG_FSENSOR_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_FSENSOR_OFF_EN,
+	MSG_FSENSOR_OFF_CZ
 };
 
 const char MSG_FSENSOR_ON_EN[] PROGMEM = "Fil. sensor  [on]";
-const char * const MSG_FSENSOR_ON_LANG_TABLE[1] PROGMEM = {
-	MSG_FSENSOR_ON_EN
+const char MSG_FSENSOR_ON_CZ[] PROGMEM = "Fil. senzor [zap]";
+const char * const MSG_FSENSOR_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_FSENSOR_ON_EN,
+	MSG_FSENSOR_ON_CZ
 };
 
 const char MSG_HEATING_EN[] PROGMEM = "Heating";
@@ -1187,8 +1211,10 @@ const char * const MSG_PINDA_PREHEAT_LANG_TABLE[LANG_NUM] PROGMEM = {
 };
 
 const char MSG_PLACE_STEEL_SHEET_EN[] PROGMEM = "Please place steel sheet on heatbed.";
-const char * const MSG_PLACE_STEEL_SHEET_LANG_TABLE[1] PROGMEM = {
-	MSG_PLACE_STEEL_SHEET_EN
+const char MSG_PLACE_STEEL_SHEET_CZ[] PROGMEM = "Umistete prosim tiskovy plat na heatbed";
+const char * const MSG_PLACE_STEEL_SHEET_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_PLACE_STEEL_SHEET_EN,
+	MSG_PLACE_STEEL_SHEET_CZ
 };
 
 const char MSG_PLANNER_BUFFER_BYTES_EN[] PROGMEM = "  PlannerBufferBytes: ";
@@ -1303,8 +1329,10 @@ const char * const MSG_REBOOT_LANG_TABLE[LANG_NUM] PROGMEM = {
 };
 
 const char MSG_RECOVERING_PRINT_EN[] PROGMEM = "Recovering print    ";
-const char * const MSG_RECOVERING_PRINT_LANG_TABLE[1] PROGMEM = {
-	MSG_RECOVERING_PRINT_EN
+const char MSG_RECOVERING_PRINT_CZ[] PROGMEM = "Obnovovani tisku    ";
+const char * const MSG_RECOVERING_PRINT_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_RECOVERING_PRINT_EN,
+	MSG_RECOVERING_PRINT_CZ
 };
 
 const char MSG_RECOVER_PRINT_EN[] PROGMEM = "Blackout occurred. Recover print?";
@@ -1323,8 +1351,10 @@ const char * const MSG_REFRESH_LANG_TABLE[1] PROGMEM = {
 };
 
 const char MSG_REMOVE_STEEL_SHEET_EN[] PROGMEM = "Please remove steel sheet from heatbed.";
-const char * const MSG_REMOVE_STEEL_SHEET_LANG_TABLE[1] PROGMEM = {
-	MSG_REMOVE_STEEL_SHEET_EN
+const char MSG_REMOVE_STEEL_SHEET_CZ[] PROGMEM = "Odstrante tiskovy plat z heatbed prosim.";
+const char * const MSG_REMOVE_STEEL_SHEET_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_REMOVE_STEEL_SHEET_EN,
+	MSG_REMOVE_STEEL_SHEET_CZ
 };
 
 const char MSG_RESEND_EN[] PROGMEM = "Resend: ";
@@ -1465,13 +1495,17 @@ const char * const MSG_SELFTEST_LANG_TABLE[1] PROGMEM = {
 };
 
 const char MSG_SELFTEST_AXIS_EN[] PROGMEM = "Axis";
-const char * const MSG_SELFTEST_AXIS_LANG_TABLE[1] PROGMEM = {
-	MSG_SELFTEST_AXIS_EN
+const char MSG_SELFTEST_AXIS_CZ[] PROGMEM = "Osa";
+const char * const MSG_SELFTEST_AXIS_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_SELFTEST_AXIS_EN,
+	MSG_SELFTEST_AXIS_CZ
 };
 
 const char MSG_SELFTEST_AXIS_LENGTH_EN[] PROGMEM = "Axis length";
-const char * const MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE[1] PROGMEM = {
-	MSG_SELFTEST_AXIS_LENGTH_EN
+const char MSG_SELFTEST_AXIS_LENGTH_CZ[] PROGMEM = "Delka osy";
+const char * const MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_SELFTEST_AXIS_LENGTH_EN,
+	MSG_SELFTEST_AXIS_LENGTH_CZ
 };
 
 const char MSG_SELFTEST_BEDHEATER_EN[] PROGMEM = "Bed / Heater";
@@ -1674,15 +1708,15 @@ const char * const MSG_SHOW_END_STOPS_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SHOW_END_STOPS_CZ
 };
 
-const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode [high power]";
-const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod  [vys. vykon]";
+const char MSG_SILENT_MODE_OFF_EN[] PROGMEM = "Mode     [Normal]";
+const char MSG_SILENT_MODE_OFF_CZ[] PROGMEM = "Mod      [Normal]";
 const char * const MSG_SILENT_MODE_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SILENT_MODE_OFF_EN,
 	MSG_SILENT_MODE_OFF_CZ
 };
 
-const char MSG_SILENT_MODE_ON_EN[] PROGMEM = "Mode     [silent]";
-const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod       [tichy]";
+const char MSG_SILENT_MODE_ON_EN[] PROGMEM = "Mode    [Stealth]";
+const char MSG_SILENT_MODE_ON_CZ[] PROGMEM = "Mod     [Stealth]";
 const char * const MSG_SILENT_MODE_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_SILENT_MODE_ON_EN,
 	MSG_SILENT_MODE_ON_CZ
@@ -1748,8 +1782,10 @@ const char * const MSG_STATS_TOTALPRINTTIME_LANG_TABLE[LANG_NUM] PROGMEM = {
 };
 
 const char MSG_STEEL_SHEET_CHECK_EN[] PROGMEM = "Is steel sheet on heatbed?";
-const char * const MSG_STEEL_SHEET_CHECK_LANG_TABLE[1] PROGMEM = {
-	MSG_STEEL_SHEET_CHECK_EN
+const char MSG_STEEL_SHEET_CHECK_CZ[] PROGMEM = "Je tiskovy plat na heatbed?";
+const char * const MSG_STEEL_SHEET_CHECK_LANG_TABLE[LANG_NUM] PROGMEM = {
+	MSG_STEEL_SHEET_CHECK_EN,
+	MSG_STEEL_SHEET_CHECK_CZ
 };
 
 const char MSG_STEPPER_TOO_HIGH_EN[] PROGMEM = "Steprate too high: ";
@@ -1823,15 +1859,15 @@ const char * const MSG_TEMP_CALIBRATION_DONE_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_DONE_CZ
 };
 
-const char MSG_TEMP_CALIBRATION_OFF_EN[] PROGMEM = "Temp. cal. [OFF]";
-const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal. [OFF]";
+const char MSG_TEMP_CALIBRATION_OFF_EN[] PROGMEM = "Temp. cal.  [off]";
+const char MSG_TEMP_CALIBRATION_OFF_CZ[] PROGMEM = "Tepl. kal.  [vyp]";
 const char * const MSG_TEMP_CALIBRATION_OFF_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_OFF_EN,
 	MSG_TEMP_CALIBRATION_OFF_CZ
 };
 
-const char MSG_TEMP_CALIBRATION_ON_EN[] PROGMEM = "Temp. cal. [ON]";
-const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal. [ON]";
+const char MSG_TEMP_CALIBRATION_ON_EN[] PROGMEM = "Temp. cal.   [on]";
+const char MSG_TEMP_CALIBRATION_ON_CZ[] PROGMEM = "Tepl. kal.  [zap]";
 const char * const MSG_TEMP_CALIBRATION_ON_LANG_TABLE[LANG_NUM] PROGMEM = {
 	MSG_TEMP_CALIBRATION_ON_EN,
 	MSG_TEMP_CALIBRATION_ON_CZ

Firmware/language_all.h

@@ -108,8 +108,8 @@ extern const char* const MSG_CALIBRATE_E_LANG_TABLE[LANG_NUM];
 #define MSG_CALIBRATE_E LANG_TABLE_SELECT(MSG_CALIBRATE_E_LANG_TABLE)
 extern const char* const MSG_CALIBRATE_PINDA_LANG_TABLE[LANG_NUM];
 #define MSG_CALIBRATE_PINDA LANG_TABLE_SELECT(MSG_CALIBRATE_PINDA_LANG_TABLE)
-extern const char* const MSG_CALIBRATE_Z_AUTO_LANG_TABLE[1];
-#define MSG_CALIBRATE_Z_AUTO LANG_TABLE_SELECT_EXPLICIT(MSG_CALIBRATE_Z_AUTO_LANG_TABLE, 0)
+extern const char* const MSG_CALIBRATE_Z_AUTO_LANG_TABLE[LANG_NUM];
+#define MSG_CALIBRATE_Z_AUTO LANG_TABLE_SELECT(MSG_CALIBRATE_Z_AUTO_LANG_TABLE)
 extern const char* const MSG_CALIBRATION_PINDA_MENU_LANG_TABLE[LANG_NUM];
 #define MSG_CALIBRATION_PINDA_MENU LANG_TABLE_SELECT(MSG_CALIBRATION_PINDA_MENU_LANG_TABLE)
 extern const char* const MSG_CARD_MENU_LANG_TABLE[LANG_NUM];
@@ -142,10 +142,10 @@ extern const char* const MSG_CORRECTLY_LANG_TABLE[LANG_NUM];
 #define MSG_CORRECTLY LANG_TABLE_SELECT(MSG_CORRECTLY_LANG_TABLE)
 extern const char* const MSG_COUNT_X_LANG_TABLE[1];
 #define MSG_COUNT_X LANG_TABLE_SELECT_EXPLICIT(MSG_COUNT_X_LANG_TABLE, 0)
-extern const char* const MSG_CRASHDETECT_OFF_LANG_TABLE[1];
-#define MSG_CRASHDETECT_OFF LANG_TABLE_SELECT_EXPLICIT(MSG_CRASHDETECT_OFF_LANG_TABLE, 0)
-extern const char* const MSG_CRASHDETECT_ON_LANG_TABLE[1];
-#define MSG_CRASHDETECT_ON LANG_TABLE_SELECT_EXPLICIT(MSG_CRASHDETECT_ON_LANG_TABLE, 0)
+extern const char* const MSG_CRASHDETECT_OFF_LANG_TABLE[LANG_NUM];
+#define MSG_CRASHDETECT_OFF LANG_TABLE_SELECT(MSG_CRASHDETECT_OFF_LANG_TABLE)
+extern const char* const MSG_CRASHDETECT_ON_LANG_TABLE[LANG_NUM];
+#define MSG_CRASHDETECT_ON LANG_TABLE_SELECT(MSG_CRASHDETECT_ON_LANG_TABLE)
 extern const char* const MSG_CRASH_DETECTED_LANG_TABLE[1];
 #define MSG_CRASH_DETECTED LANG_TABLE_SELECT_EXPLICIT(MSG_CRASH_DETECTED_LANG_TABLE, 0)
 extern const char* const MSG_CURRENT_LANG_TABLE[LANG_NUM];
@@ -202,6 +202,10 @@ extern const char* const MSG_Enqueing_LANG_TABLE[1];
 #define MSG_Enqueing LANG_TABLE_SELECT_EXPLICIT(MSG_Enqueing_LANG_TABLE, 0)
 extern const char* const MSG_FACTOR_LANG_TABLE[1];
 #define MSG_FACTOR LANG_TABLE_SELECT_EXPLICIT(MSG_FACTOR_LANG_TABLE, 0)
+extern const char* const MSG_FANS_CHECK_OFF_LANG_TABLE[LANG_NUM];
+#define MSG_FANS_CHECK_OFF LANG_TABLE_SELECT(MSG_FANS_CHECK_OFF_LANG_TABLE)
+extern const char* const MSG_FANS_CHECK_ON_LANG_TABLE[LANG_NUM];
+#define MSG_FANS_CHECK_ON LANG_TABLE_SELECT(MSG_FANS_CHECK_ON_LANG_TABLE)
 extern const char* const MSG_FAN_SPEED_LANG_TABLE[LANG_NUM];
 #define MSG_FAN_SPEED LANG_TABLE_SELECT(MSG_FAN_SPEED_LANG_TABLE)
 extern const char* const MSG_FARM_CARD_MENU_LANG_TABLE[1];
@@ -244,10 +248,10 @@ extern const char* const MSG_FOLLOW_CALIBRATION_FLOW_LANG_TABLE[LANG_NUM];
 #define MSG_FOLLOW_CALIBRATION_FLOW LANG_TABLE_SELECT(MSG_FOLLOW_CALIBRATION_FLOW_LANG_TABLE)
 extern const char* const MSG_FREE_MEMORY_LANG_TABLE[1];
 #define MSG_FREE_MEMORY LANG_TABLE_SELECT_EXPLICIT(MSG_FREE_MEMORY_LANG_TABLE, 0)
-extern const char* const MSG_FSENSOR_OFF_LANG_TABLE[1];
-#define MSG_FSENSOR_OFF LANG_TABLE_SELECT_EXPLICIT(MSG_FSENSOR_OFF_LANG_TABLE, 0)
-extern const char* const MSG_FSENSOR_ON_LANG_TABLE[1];
-#define MSG_FSENSOR_ON LANG_TABLE_SELECT_EXPLICIT(MSG_FSENSOR_ON_LANG_TABLE, 0)
+extern const char* const MSG_FSENSOR_OFF_LANG_TABLE[LANG_NUM];
+#define MSG_FSENSOR_OFF LANG_TABLE_SELECT(MSG_FSENSOR_OFF_LANG_TABLE)
+extern const char* const MSG_FSENSOR_ON_LANG_TABLE[LANG_NUM];
+#define MSG_FSENSOR_ON LANG_TABLE_SELECT(MSG_FSENSOR_ON_LANG_TABLE)
 extern const char* const MSG_HEATING_LANG_TABLE[LANG_NUM];
 #define MSG_HEATING LANG_TABLE_SELECT(MSG_HEATING_LANG_TABLE)
 extern const char* const MSG_HEATING_COMPLETE_LANG_TABLE[LANG_NUM];
@@ -410,8 +414,8 @@ extern const char* const MSG_PINDA_NOT_CALIBRATED_LANG_TABLE[LANG_NUM];
 #define MSG_PINDA_NOT_CALIBRATED LANG_TABLE_SELECT(MSG_PINDA_NOT_CALIBRATED_LANG_TABLE)
 extern const char* const MSG_PINDA_PREHEAT_LANG_TABLE[LANG_NUM];
 #define MSG_PINDA_PREHEAT LANG_TABLE_SELECT(MSG_PINDA_PREHEAT_LANG_TABLE)
-extern const char* const MSG_PLACE_STEEL_SHEET_LANG_TABLE[1];
-#define MSG_PLACE_STEEL_SHEET LANG_TABLE_SELECT_EXPLICIT(MSG_PLACE_STEEL_SHEET_LANG_TABLE, 0)
+extern const char* const MSG_PLACE_STEEL_SHEET_LANG_TABLE[LANG_NUM];
+#define MSG_PLACE_STEEL_SHEET LANG_TABLE_SELECT(MSG_PLACE_STEEL_SHEET_LANG_TABLE)
 extern const char* const MSG_PLANNER_BUFFER_BYTES_LANG_TABLE[1];
 #define MSG_PLANNER_BUFFER_BYTES LANG_TABLE_SELECT_EXPLICIT(MSG_PLANNER_BUFFER_BYTES_LANG_TABLE, 0)
 extern const char* const MSG_PLA_FILAMENT_LOADED_LANG_TABLE[LANG_NUM];
@@ -446,16 +450,16 @@ extern const char* const MSG_PRUSA3D_HOWTO_LANG_TABLE[LANG_NUM];
 #define MSG_PRUSA3D_HOWTO LANG_TABLE_SELECT(MSG_PRUSA3D_HOWTO_LANG_TABLE)
 extern const char* const MSG_REBOOT_LANG_TABLE[LANG_NUM];
 #define MSG_REBOOT LANG_TABLE_SELECT(MSG_REBOOT_LANG_TABLE)
-extern const char* const MSG_RECOVERING_PRINT_LANG_TABLE[1];
-#define MSG_RECOVERING_PRINT LANG_TABLE_SELECT_EXPLICIT(MSG_RECOVERING_PRINT_LANG_TABLE, 0)
+extern const char* const MSG_RECOVERING_PRINT_LANG_TABLE[LANG_NUM];
+#define MSG_RECOVERING_PRINT LANG_TABLE_SELECT(MSG_RECOVERING_PRINT_LANG_TABLE)
 extern const char* const MSG_RECOVER_PRINT_LANG_TABLE[1];
 #define MSG_RECOVER_PRINT LANG_TABLE_SELECT_EXPLICIT(MSG_RECOVER_PRINT_LANG_TABLE, 0)
 extern const char* const MSG_RECTRACT_LANG_TABLE[1];
 #define MSG_RECTRACT LANG_TABLE_SELECT_EXPLICIT(MSG_RECTRACT_LANG_TABLE, 0)
 extern const char* const MSG_REFRESH_LANG_TABLE[1];
 #define MSG_REFRESH LANG_TABLE_SELECT_EXPLICIT(MSG_REFRESH_LANG_TABLE, 0)
-extern const char* const MSG_REMOVE_STEEL_SHEET_LANG_TABLE[1];
-#define MSG_REMOVE_STEEL_SHEET LANG_TABLE_SELECT_EXPLICIT(MSG_REMOVE_STEEL_SHEET_LANG_TABLE, 0)
+extern const char* const MSG_REMOVE_STEEL_SHEET_LANG_TABLE[LANG_NUM];
+#define MSG_REMOVE_STEEL_SHEET LANG_TABLE_SELECT(MSG_REMOVE_STEEL_SHEET_LANG_TABLE)
 extern const char* const MSG_RESEND_LANG_TABLE[1];
 #define MSG_RESEND LANG_TABLE_SELECT_EXPLICIT(MSG_RESEND_LANG_TABLE, 0)
 extern const char* const MSG_RESET_CALIBRATE_E_LANG_TABLE[1];
@@ -506,10 +510,10 @@ extern const char* const MSG_SD_WRITE_TO_FILE_LANG_TABLE[1];
 #define MSG_SD_WRITE_TO_FILE LANG_TABLE_SELECT_EXPLICIT(MSG_SD_WRITE_TO_FILE_LANG_TABLE, 0)
 extern const char* const MSG_SELFTEST_LANG_TABLE[1];
 #define MSG_SELFTEST LANG_TABLE_SELECT_EXPLICIT(MSG_SELFTEST_LANG_TABLE, 0)
-extern const char* const MSG_SELFTEST_AXIS_LANG_TABLE[1];
-#define MSG_SELFTEST_AXIS LANG_TABLE_SELECT_EXPLICIT(MSG_SELFTEST_AXIS_LANG_TABLE, 0)
-extern const char* const MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE[1];
-#define MSG_SELFTEST_AXIS_LENGTH LANG_TABLE_SELECT_EXPLICIT(MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE, 0)
+extern const char* const MSG_SELFTEST_AXIS_LANG_TABLE[LANG_NUM];
+#define MSG_SELFTEST_AXIS LANG_TABLE_SELECT(MSG_SELFTEST_AXIS_LANG_TABLE)
+extern const char* const MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE[LANG_NUM];
+#define MSG_SELFTEST_AXIS_LENGTH LANG_TABLE_SELECT(MSG_SELFTEST_AXIS_LENGTH_LANG_TABLE)
 extern const char* const MSG_SELFTEST_BEDHEATER_LANG_TABLE[1];
 #define MSG_SELFTEST_BEDHEATER LANG_TABLE_SELECT_EXPLICIT(MSG_SELFTEST_BEDHEATER_LANG_TABLE, 0)
 extern const char* const MSG_SELFTEST_CHECK_ALLCORRECT_LANG_TABLE[LANG_NUM];
@@ -596,8 +600,8 @@ extern const char* const MSG_STATS_TOTALFILAMENT_LANG_TABLE[LANG_NUM];
 #define MSG_STATS_TOTALFILAMENT LANG_TABLE_SELECT(MSG_STATS_TOTALFILAMENT_LANG_TABLE)
 extern const char* const MSG_STATS_TOTALPRINTTIME_LANG_TABLE[LANG_NUM];
 #define MSG_STATS_TOTALPRINTTIME LANG_TABLE_SELECT(MSG_STATS_TOTALPRINTTIME_LANG_TABLE)
-extern const char* const MSG_STEEL_SHEET_CHECK_LANG_TABLE[1];
-#define MSG_STEEL_SHEET_CHECK LANG_TABLE_SELECT_EXPLICIT(MSG_STEEL_SHEET_CHECK_LANG_TABLE, 0)
+extern const char* const MSG_STEEL_SHEET_CHECK_LANG_TABLE[LANG_NUM];
+#define MSG_STEEL_SHEET_CHECK LANG_TABLE_SELECT(MSG_STEEL_SHEET_CHECK_LANG_TABLE)
 extern const char* const MSG_STEPPER_TOO_HIGH_LANG_TABLE[1];
 #define MSG_STEPPER_TOO_HIGH LANG_TABLE_SELECT_EXPLICIT(MSG_STEPPER_TOO_HIGH_LANG_TABLE, 0)
 extern const char* const MSG_STOPPED_LANG_TABLE[1];

Firmware/language_cz.h

@@ -102,8 +102,8 @@
 #define MSG_INSERT_FILAMENT		"Vlozte filament"
 #define MSG_CHANGING_FILAMENT	"Vymena filamentu!"
 
-#define MSG_SILENT_MODE_ON					"Mod       [tichy]"
-#define MSG_SILENT_MODE_OFF					"Mod  [vys. vykon]" 
+#define MSG_SILENT_MODE_ON					"Mod     [Stealth]"
+#define MSG_SILENT_MODE_OFF					"Mod      [Normal]" 
 #define MSG_REBOOT							"Restartujte tiskarnu"
 #define MSG_TAKE_EFFECT						" pro projeveni zmen"	
 
@@ -290,8 +290,8 @@
 #define MSG_PINDA_PREHEAT								"Nahrivani PINDA"
 #define MSG_TEMP_CALIBRATION							"Tepl. kal.          "
 #define MSG_TEMP_CALIBRATION_DONE						"Teplotni kalibrace dokoncena. Pokracujte stiskem tlacitka."
-#define MSG_TEMP_CALIBRATION_ON							"Tepl. kal. [ON]"
-#define MSG_TEMP_CALIBRATION_OFF						"Tepl. kal. [OFF]"
+#define MSG_TEMP_CALIBRATION_ON							"Tepl. kal.  [zap]"
+#define MSG_TEMP_CALIBRATION_OFF						"Tepl. kal.  [vyp]"
 #define MSG_PREPARE_FILAMENT							"Pripravte filament"
 #define MSG_ALL											"Vse"
 #define MSG_USED										"Pouzite behem tisku"
@@ -334,4 +334,18 @@
 #define MSG_RIGHT							"Pravy:"
 #define MSG_MEASURED_SKEW					"Merene zkoseni:"
 #define MSG_SLIGHT_SKEW						"Lehke zkoseni:"
-#define MSG_SEVERE_SKEW						"Tezke zkoseni:"
+#define MSG_SEVERE_SKEW						"Tezke zkoseni:"
+
+#define MSG_CALIBRATE_Z_AUTO				"Kalibruji Z"
+#define MSG_FSENSOR_OFF						"Fil. senzor [vyp]"
+#define MSG_FSENSOR_ON						"Fil. senzor [zap]" 
+#define MSG_CRASHDETECT_ON					"Crash det.  [zap]"
+#define MSG_CRASHDETECT_OFF					"Crash det.  [vyp]"
+#define MSG_FANS_CHECK_ON					"Kontr. vent.[zap]"
+#define MSG_FANS_CHECK_OFF					"Kontr. vent.[vyp]"
+#define MSG_RECOVERING_PRINT				"Obnovovani tisku    "
+#define MSG_SELFTEST_AXIS					"Osa"
+#define MSG_SELFTEST_AXIS_LENGTH			"Delka osy"
+#define MSG_STEEL_SHEET_CHECK				"Je tiskovy plat na heatbed?"
+#define MSG_REMOVE_STEEL_SHEET				"Odstrante tiskovy plat z heatbed prosim."
+#define MSG_PLACE_STEEL_SHEET				"Umistete prosim tiskovy plat na heatbed"

Firmware/language_en.h

@@ -101,8 +101,8 @@
 #define(length=20) MSG_CHANGING_FILAMENT	"Changing filament!"
 
 
-#define MSG_SILENT_MODE_ON					"Mode     [silent]"
-#define MSG_SILENT_MODE_OFF					"Mode [high power]" 
+#define MSG_SILENT_MODE_ON					"Mode    [Stealth]"
+#define MSG_SILENT_MODE_OFF					"Mode     [Normal]" 
 #define(length=20) MSG_REBOOT				"Reboot the printer"
 #define(length=20) MSG_TAKE_EFFECT			" for take effect"											
 
@@ -291,8 +291,8 @@
 #define(length=20, lines=1) MSG_PINDA_PREHEAT					"PINDA Heating"
 #define(length=20, lines=1) MSG_TEMP_CALIBRATION				"Temp. cal.          "
 #define(length=20, lines=4) MSG_TEMP_CALIBRATION_DONE			"Temperature calibration is finished. Click to continue."
-#define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON				"Temp. cal. [ON]"
-#define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF			"Temp. cal. [OFF]"
+#define(length=20, lines=1) MSG_TEMP_CALIBRATION_ON				"Temp. cal.   [on]"
+#define(length=20, lines=1) MSG_TEMP_CALIBRATION_OFF			"Temp. cal.  [off]"
 #define(length=20, lines=1) MSG_PREPARE_FILAMENT				"Prepare new filament"
 #define(length=19, lines=1) MSG_ALL								"All"
 #define(length=19, lines=1) MSG_USED							"Used during print"
@@ -364,3 +364,5 @@
 #define(length=11, lines=1) MSG_INFO_PRINT_FAN				"Print FAN: "
 #define(length=11, lines=1) MSG_INFO_FILAMENT_XDIFF				"Fil. Xd:"
 #define(length=11, lines=1) MSG_INFO_FILAMENT_YDIFF				"Fil. Ydiff:"
+#define(length=17, lines=1) MSG_FANS_CHECK_ON					"Fans check   [on]"
+#define(length=17, lines=1) MSG_FANS_CHECK_OFF					"Fans check  [off]"

Firmware/ultralcd.cpp

@@ -1598,9 +1598,9 @@ static void lcd_preheat_menu()
   if (farm_mode)
     MENU_ITEM(function, PSTR("farm  -  " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), lcd_preheat_farm);
 
-  MENU_ITEM(function, PSTR("ABS  -  " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)), lcd_preheat_abs);
   MENU_ITEM(function, PSTR("PLA  -  " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)), lcd_preheat_pla);
   MENU_ITEM(function, PSTR("PET  -  " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)), lcd_preheat_pet);
+  MENU_ITEM(function, PSTR("ABS  -  " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)), lcd_preheat_abs);
   MENU_ITEM(function, PSTR("HIPS -  " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)), lcd_preheat_hips);
   MENU_ITEM(function, PSTR("PP   -  " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)), lcd_preheat_pp);
   MENU_ITEM(function, PSTR("FLEX -  " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)), lcd_preheat_flex);
@@ -1668,24 +1668,14 @@ static void lcd_support_menu()
   MENU_ITEM(submenu, PSTR("Belt status"), lcd_menu_belt_status);
     
   MENU_ITEM(submenu, PSTR("Temperatures"), lcd_menu_temperatures);
-  if (fans_check_enabled == true) {
-	  MENU_ITEM(function, PSTR("Check fans [EN]"), lcd_set_fan_check);
-  }
-  else {
-	  MENU_ITEM(function, PSTR("Check fans [DIS]"), lcd_set_fan_check);
-  }
   #endif //MK1BP
-    
-#ifdef AUTOMATIC_RECOVERY_AFTER_CRASH
-    MENU_ITEM(back, PSTR("Auto recover crash"), lcd_main_menu);
-#endif
   END_MENU();
 }
 
 void lcd_set_fan_check() {
 	fans_check_enabled = !fans_check_enabled;
 	eeprom_update_byte((unsigned char *)EEPROM_FAN_CHECK_ENABLED, fans_check_enabled);
-	lcd_goto_menu(lcd_support_menu, 15);
+	lcd_goto_menu(lcd_settings_menu, 8);
 }
 
 void lcd_unLoadFilament()
@@ -3248,7 +3238,8 @@ static void lcd_silent_mode_set() {
   sei();
 #endif //TMC2130
   digipot_init();
-  lcd_goto_menu(lcd_settings_menu, 7);
+  if (IS_SD_PRINTING || is_usb_printing) lcd_goto_menu(lcd_tune_menu, 8);
+  else lcd_goto_menu(lcd_settings_menu, 7);
 }
 
 static void lcd_crash_mode_set()
@@ -3259,7 +3250,8 @@ static void lcd_crash_mode_set()
     }else{
         crashdet_enable();
     }
-	lcd_goto_menu(lcd_settings_menu, 7);
+	if (IS_SD_PRINTING || is_usb_printing) lcd_goto_menu(lcd_tune_menu, 9);
+	else lcd_goto_menu(lcd_settings_menu, 9);
     
 }
 
@@ -3281,7 +3273,8 @@ static void lcd_fsensor_state_set()
     }else{
         fsensor_enable();
     }
-	lcd_goto_menu(lcd_settings_menu, 7);
+	if (IS_SD_PRINTING || is_usb_printing) lcd_goto_menu(lcd_tune_menu, 7);
+	else lcd_goto_menu(lcd_settings_menu, 7);
     
 }
 
@@ -3327,12 +3320,6 @@ void lcd_pinda_calibration_menu()
 	START_MENU();
 		MENU_ITEM(back, MSG_MENU_CALIBRATION, lcd_calibration_menu);
 		MENU_ITEM(submenu, MSG_CALIBRATE_PINDA, lcd_calibrate_pinda);
-		if (temp_cal_active == false) {
-			MENU_ITEM(function, MSG_TEMP_CALIBRATION_OFF, lcd_temp_calibration_set);
-		}
-		else {
-			MENU_ITEM(function, MSG_TEMP_CALIBRATION_ON, lcd_temp_calibration_set);
-		}
 	END_MENU();
 }
 
@@ -3340,7 +3327,7 @@ void lcd_temp_calibration_set() {
 	temp_cal_active = !temp_cal_active;
 	eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, temp_cal_active);
 	digipot_init();
-	lcd_goto_menu(lcd_pinda_calibration_menu, 2);
+	lcd_goto_menu(lcd_settings_menu, 10);
 }
 
 void lcd_calibrate_pinda() {
@@ -3680,12 +3667,13 @@ static void lcd_settings_menu()
   } else {
     MENU_ITEM(function, MSG_FSENSOR_ON, lcd_fsensor_state_set);
   }
-
-  if (SilentModeMenu == 0) {
-    MENU_ITEM(function, MSG_SILENT_MODE_OFF, lcd_silent_mode_set);
-  } else {
-    MENU_ITEM(function, MSG_SILENT_MODE_ON, lcd_silent_mode_set);
+  if (fans_check_enabled == true) {
+	  MENU_ITEM(function, MSG_FANS_CHECK_ON, lcd_set_fan_check);
   }
+  else {
+	  MENU_ITEM(function, MSG_FANS_CHECK_OFF, lcd_set_fan_check);
+  }
+
 
   if (SilentModeMenu == 0) {
     if (CrashDetectMenu == 0) {
@@ -3694,7 +3682,18 @@ static void lcd_settings_menu()
       MENU_ITEM(function, MSG_CRASHDETECT_ON, lcd_crash_mode_set);
     }
   }
-
+  if (temp_cal_active == false) {
+	  MENU_ITEM(function, MSG_TEMP_CALIBRATION_OFF, lcd_temp_calibration_set);
+  }
+  else {
+	  MENU_ITEM(function, MSG_TEMP_CALIBRATION_ON, lcd_temp_calibration_set);
+  }
+  if (SilentModeMenu == 0) {
+	  MENU_ITEM(function, MSG_SILENT_MODE_OFF, lcd_silent_mode_set);
+  }
+  else {
+	  MENU_ITEM(function, MSG_SILENT_MODE_ON, lcd_silent_mode_set);
+  }
 	if (!isPrintPaused && !homing_flag)
 	{
 		MENU_ITEM(submenu, MSG_BABYSTEP_Z, lcd_babystep_z);
@@ -3727,30 +3726,27 @@ static void lcd_calibration_menu()
   MENU_ITEM(back, MSG_MAIN, lcd_main_menu);
   if (!isPrintPaused)
   {
+	MENU_ITEM(function, MSG_WIZARD, lcd_wizard);
+	MENU_ITEM(submenu, MSG_V2_CALIBRATION, lcd_v2_calibration);
 	MENU_ITEM(gcode, MSG_AUTO_HOME, PSTR("G28 W"));
-    MENU_ITEM(function, MSG_SELFTEST, lcd_selftest_v);
+	MENU_ITEM(function, MSG_SELFTEST, lcd_selftest_v);
 #ifdef MK1BP
     // MK1
     // "Calibrate Z"
     MENU_ITEM(gcode, MSG_HOMEYZ, PSTR("G28 Z"));
 #else //MK1BP
     // MK2
-MENU_ITEM(function, MSG_CALIBRATE_BED, lcd_mesh_calibration);
+    MENU_ITEM(function, MSG_CALIBRATE_BED, lcd_mesh_calibration);
     // "Calibrate Z" with storing the reference values to EEPROM.
     MENU_ITEM(submenu, MSG_HOMEYZ, lcd_mesh_calibration_z);
-	MENU_ITEM(submenu, MSG_V2_CALIBRATION, lcd_v2_calibration);
-	
 #ifndef SNMM
 	//MENU_ITEM(function, MSG_CALIBRATE_E, lcd_calibrate_extruder);
 #endif
     // "Mesh Bed Leveling"
     MENU_ITEM(submenu, MSG_MESH_BED_LEVELING, lcd_mesh_bedleveling);
-	MENU_ITEM(function, MSG_WIZARD, lcd_wizard);
+	
 #endif //MK1BP
     MENU_ITEM(submenu, MSG_BED_CORRECTION_MENU, lcd_adjust_bed);
-#ifndef MK1BP
-	MENU_ITEM(submenu, MSG_CALIBRATION_PINDA_MENU, lcd_pinda_calibration_menu);
-#endif //MK1BP
 	MENU_ITEM(submenu, MSG_PID_EXTRUDER, pid_extruder);
     MENU_ITEM(submenu, MSG_SHOW_END_STOPS, menu_show_end_stops);
 #ifndef MK1BP
@@ -3759,6 +3755,9 @@ MENU_ITEM(function, MSG_CALIBRATE_BED, lcd_mesh_calibration);
 #ifndef SNMM
 	//MENU_ITEM(function, MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset);
 #endif
+#ifndef MK1BP
+	MENU_ITEM(submenu, MSG_CALIBRATION_PINDA_MENU, lcd_pinda_calibration_menu);
+#endif //MK1BP
   }
   
   END_MENU();