Add/fix few functions

Check MK404 for latest stable release instead of dev branch

MK404-build.sh

@@ -10,7 +10,7 @@
 # 3. Install latest updates with 'sudo apt-get upgrade'
 # 
 #
-# Version: 1.0.0-Build_11
+# Version: 1.0.0-Build_13
 # Change log:
 # 11 Feb 2021, 3d-gussner, Inital
 # 11 Feb 2021, 3d-gussner, Optional flags to check for updates
@@ -23,6 +23,27 @@
 # 18 Jun 2021, 3d-gussner, Check for updates is default. Fix update if internet connection is lost.
 # 21 Jun 2021, 3d-gussner, Change board_flash argument to 'y' and firmware_version to 'f'
 
+#### Start: Failures
+failures()
+{
+case "$1" in
+    0) echo "$(tput setaf 2)MK404-build.sh finished with success$(tput sgr0)" ;;
+    2) echo "$(tput setaf 1)Unsupported OS: Linux $(uname -m)" ; echo "Please refer to the notes of MK404-build.sh$(tput sgr0)" ; exit 2 ;;
+    3) echo "$(tput setaf 1)This script doesn't support your Operating system!"; echo "Please use Linux 64-bit"; echo "Read the notes of MK404-build.sh$(tput sgr0)" ; exit 2 ;;
+    4) echo "$(tput setaf 1)Some packages are missing please install these!$(tput sgr0)" ; exit 4 ;;
+    5) echo "$(tput setaf 1)Wrong printer chosen.$(tput sgr0) Following Printers are supported: MK25, MK25S, MK3 and MK3S" ; exit 5 ;;
+    6) echo "$(tput setaf 1)Unsupported board flash size chosen.$(tput sgr0) Only '256', '384', '512', '1024' and '32M' are allowed." ; exit 6 ;;
+    7) echo "$(tput setaf 1)Unsupported board mem size chosen.$(tput sgr0) Only '8', '16', '32' and '64' are allowed." ; exit 7 ;;
+    8) echo "$(tput setaf 1)No firmware version file selected!$(tput sgr0)" ; echo "Add argument -f with path and hex filename to start MK404" ; exit 8 ;;
+    9) echo "$(tput setaf 1)Tried to determine MK404 printer from hex file, but failed!$(tput sgr0)" ; "Add argument -p with 'MK25', 'MK25S', 'MK3' or 'MK3S' to start MK404" ; exit 9 ;;
+    10) echo "$(tput setaf 1)Missing printer$(tput sgr0)" ; exit 10 ;;
+esac
+}
+#### End: Failures
+
+#### Start: Check options
+##check_options()
+##{
 while getopts c:f:g:m:n:p:u:x:y:?h flag
     do
         case "${flag}" in
@@ -53,7 +74,7 @@ while getopts c:f:g:m:n:p:u:x:y:?h flag
 # '?' 'h' argument usage and help
 if [ "$help_flag" == "1" ] ; then
 echo "***************************************"
-echo "* MK404-build.sh Version: 1.0.0-Build_11 *"
+echo "* MK404-build.sh Version: 1.0.0-Build_13 *"
 echo "***************************************"
 echo "Arguments:"
 echo "$(tput setaf 2)-c$(tput sgr0) Check for update"
@@ -78,19 +99,190 @@ echo "  -m : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' y
 echo "  -n : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
 echo "  -p : '$(tput setaf 2)MK25$(tput sgr0)', '$(tput setaf 2)MK25S$(tput sgr0)', '$(tput setaf 2)MK3$(tput sgr0)' or '$(tput setaf 2)MK3S$(tput sgr0)'"
 echo "  -u : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes '"
-echo "  -x : '$(tput setaf 2)8$(tput sgr0)' or '$(tput setaf 2)64$(tput sgr0)' Kb."
+echo "  -x : '$(tput setaf 2)8$(tput sgr0)',$(tput setaf 2)16$(tput sgr0)',$(tput setaf 2)32$(tput sgr0)' or '$(tput setaf 2)64$(tput sgr0)' Kb."
 echo "  -y : '$(tput setaf 2)256$(tput sgr0)','$(tput setaf 2)384$(tput sgr0)','$(tput setaf 2)512$(tput sgr0)','$(tput setaf 2)1024$(tput sgr0)''$(tput setaf 2)32M$(tput sgr0)'"
 echo
 echo "Example:"
 echo "  $(tput setaf 2)./MK404-build.sh -f 1$(tput sgr0)"
 echo "  Will force an update and rebuild the MK404 SIM"
 echo
-echo "  $(tput setaf 2)./MK404-build.sh -m 1 -g 1 -v ../../../../Prusa-Firmware/PF-build-hex/FW3100-Build4481/BOAD_EINSY_1_0a/FW3100-Build4481-1_75mm_MK3S-EINSy10a-E3Dv6full.hex$(tput sgr0)"
+echo "  $(tput setaf 2)./MK404-build.sh -m 1 -g 1 -f ../../../../Prusa-Firmware/PF-build-hex/FW3100-Build4481/BOARD_EINSY_1_0a/FW3100-Build4481-1_75mm_MK3S-EINSy10a-E3Dv6full.hex$(tput sgr0)"
 echo "  Will start MK404 with Prusa_MK3S and Prusa-Firmware 3.10.0-Build4481"
 exit 1
 fi
 
-#### Start check if OSTYPE is supported
+#Check MK404 agruments
+#Set Check for updates as default
+check_flag=1
+#Start: Check mk404_printer_flag
+if [ ! -z $mk404_printer_flag ]; then
+    if [[ "$mk404_printer_flag" == "MK3" || "$mk404_printer_flag" == "MK3S" || "$mk404_printer_flag" == "MK25" || "$mk404_printer_flag" == "MK25S" ]]; then
+        MK404_PRINTER_TEMP=$mk404_printer_flag
+    else
+        failures 5
+    fi
+fi
+#End: Check mk404_printer_flag
+
+#Start: Check if Build is selected with argument '-f'
+if [ ! -z "$board_flash_flag" ] ; then
+    if [ "$board_flash_flag" == "256" ] ; then
+        BOARD_FLASH="0x3FFFF"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
+    elif [ "$board_flash_flag" == "384" ] ; then
+        BOARD_FLASH="0x5FFFF"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
+    elif [ "$board_flash_flag" == "512" ] ; then
+        BOARD_FLASH="0x7FFFF"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
+    elif [ "$board_flash_flag" == "1024" ] ; then
+        BOARD_FLASH="0xFFFFF"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
+    elif [[ "$board_flash_flag" == "32M" || "$board_flash_flag" == "32768" ]] ; then
+        BOARD_FLASH="0x1FFFFFF"
+        echo "Board flash size :    32 Mb, $BOARD_FLASH (hex)"
+    else
+        failures 6
+    fi
+fi
+#End: Check if Build is selected with argument '-f'
+
+#Start: Check if Build is selected with argument '-x'
+if [ ! -z "$board_mem_flag" ] ; then
+    if [ "$board_mem_flag" == "8" ] ; then
+        BOARD_MEM="0x21FF"
+        echo "Board mem size   :     $board_mem_flag Kb, $BOARD_MEM (hex)"
+    elif [ "$board_mem_flag" == "16" ] ; then
+        BOARD_MEM="0x3DFF"
+        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
+    elif [ "$board_mem_flag" == "32" ] ; then
+        BOARD_MEM="0x7DFF"
+        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
+    elif [ "$board_mem_flag" == "64" ] ; then
+        BOARD_MEM="0xFFFF"
+        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
+    else
+        failures 7
+    fi
+fi
+#End: Check if Build is selected with argument '-x'
+
+#Start: Check if new build is selected
+if [ "$new_build_flag" == "1" ]; then
+    check_flag=1
+    update_flag=1
+fi
+if [ "$update_flag" == "1" ]; then
+    check_flag=1
+fi
+#End: Check if new build is selected
+
+# Prepare run MK404
+#Check MK404_Printer
+if [ ! -z $firmware_version_flag ]; then
+    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK3')
+    if [ ! -z $MK404_PRINTER_TEMP ]; then
+        MK404_PRINTER=MK3
+    fi
+    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK3S')
+    if [ ! -z $MK404_PRINTER_TEMP ]; then
+        MK404_PRINTER=MK3S
+    fi
+    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK25')
+    if [ ! -z $MK404_PRINTER_TEMP ]; then
+        MK404_PRINTER=MK25
+    fi
+    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK25S')
+    if [ ! -z $MK404_PRINTER_TEMP ]; then
+        MK404_PRINTER=MK25S
+    fi
+else
+    failures 8
+fi
+
+if [ -z "$MK404_PRINTER" ]; then
+    failures 9
+fi
+
+if [ ! -z $mk404_printer_flag ]; then
+    if [ "$mk404_printer_flag" != "$MK404_PRINTER" ]; then
+        echo "$(tput setaf 3)You defined a different printer type than the firmware!"
+        echo "This can cause unexpected issues.$(tput sgr 0)"
+        echo 
+        PS3="Select $(tput setaf 2)printer$(tput sgr 0) you want to use."
+        select which in "$(tput setaf 2)$MK404_PRINTER$(tput sgr 0)" "$mk404_printer_flag"; do
+            case $which in
+                $MK404_PRINTER)
+                    echo "Set $MK404_PRINTER as printer"
+                    break
+                    ;;
+                $mk404_printer_flag)
+                    echo "Set $(tput setaf 3)$mk404_printer_flag$(tput sgr 0) as printer"
+                    echo "$(tput setaf 3)This firmware file isn't correct for this printer!!!$(tput sgr 0)"
+                    echo 
+                    MK404_PRINTER=$mk404_printer_flag
+                    read -p "Press Enter to continue."
+                    break
+                    ;;
+                *)
+                    break
+                    ;;
+            esac
+        done
+    fi
+fi
+
+if [ -z $MK404_PRINTER ]; then
+    failures 10
+fi
+
+if [[ "$MK404_PRINTER" == "MK25" || "$MK404_PRINTER" == "MK25S" ]]; then
+    MK404_PRINTER="${MK404_PRINTER}_mR13"
+else
+    if [ "$mk404_flag" == "2" ]; then # Check if MMU2 is selected only for MK3/S
+        MK404_PRINTER="${MK404_PRINTER}MMU2"
+    fi
+fi
+
+# Run MK404 with 'debugcore' and/or 'bootloader-file'
+    if [[ ! -z $MK404_DEBUG && "$MK404_DEBUG" == "atmega404" || ! -z $BOARD_MEM && "$BOARD_MEM" == "0xFFFF" ]]; then
+        MK404_options="--debugcore"
+    fi
+    if [[ ! -z $MK404_DEBUG && "$MK404_DEBUG" == "atmega404_no_bootloader"  || ! -z $BOARD_FLASH && "$BOARD_FLASH" != "0x3FFFF" ]]; then
+        MK404_options='--debugcore --bootloader-file ""'
+    fi
+
+# Run MK404 with graphics
+    if [ ! -z "$mk404_graphics_flag" ]; then
+        if [ ! -z "$MK404_options" ]; then
+            MK404_options="${MK404_options} -g "
+        else
+            MK404_options=" -g "
+        fi
+        if [[ "$mk404_graphics_flag" == "1" || "$mk404_graphics_flag" == "lite" || "$mk404_graphics_flag" == "3" ]]; then
+            MK404_options="${MK404_options}lite"
+        elif [[ "$mk404_graphics_flag" == "2" || "$mk404_graphics_flag" == "fancy" || "$mk404_graphics_flag" == "4" ]]; then
+            MK404_options="${MK404_options}fancy"
+        else
+            echo "$(tput setaf 1)Unsupported MK404 graphics option $mk404_graphics_flag$(tput sgr 0)"
+        fi
+        if [[ "$mk404_graphics_flag" == "3" || "$mk404_graphics_flag" == "4" ]]; then
+            MK404_options="${MK404_options} --colour-extrusion --extrusion Quad_HR"
+        else
+            MK404_options="${MK404_options} --extrusion Line"
+        fi
+    fi
+if [ ! -z $firmware_version_flag ]; then
+    MK404_firmware_file=" -f $firmware_version_flag"
+fi
+
+#End: Check MK404 agruments
+##}
+#### End: Check for options/flags
+
+#### Start: Check if OSTYPE is supported
+check_OS()
+{
 OS_FOUND=$( command -v uname)
 case $( "${OS_FOUND}" | tr '[:upper:]' '[:lower:]') in
   linux*)
@@ -102,27 +294,25 @@ case $( "${OS_FOUND}" | tr '[:upper:]' '[:lower:]') in
 esac
 # Linux
 if [ $TARGET_OS == "linux" ]; then
-	if [ $(uname -m) == "x86_64" ]; then
-		echo "$(tput setaf 2)Linux 64-bit found$(tput sgr0)"
-		Processor="64"
-	#elif [[ $(uname -m) == "i386" || $(uname -m) == "i686" ]]; then
-	#	echo "$(tput setaf 2)Linux 32-bit found$(tput sgr0)"
-	#	Processor="32"
-	else
-		echo "$(tput setaf 1)Unsupported OS: Linux $(uname -m)"
-		echo "Please refer to the notes of build.sh$(tput sgr0)"
-		exit 2
-	fi
+    if [ $(uname -m) == "x86_64" ]; then
+        echo "$(tput setaf 2)Linux 64-bit found$(tput sgr0)"
+        Processor="64"
+    #elif [[ $(uname -m) == "i386" || $(uname -m) == "i686" ]]; then
+    #    echo "$(tput setaf 2)Linux 32-bit found$(tput sgr0)"
+    #    Processor="32"
+    else
+        failures 2
+    fi
 else
-	echo "$(tput setaf 1)This script doesn't support your Operating system!"
-	echo "Please use Linux 64-bit"
-	echo "Read the notes of build.sh$(tput sgr0)"
-	exit 2
+    failures 3 
 fi
 sleep 2
-#### End check if OSTYPE is supported
+}
+#### End: Check if OSTYPE is supported
 
-#### Check MK404 dependencies
+#### Start: Check MK404 dependencies
+check_packages()
+{
 packages=(
 "libelf-dev"
 "gcc-7"
@@ -151,99 +341,49 @@ for check_package in ${packages[@]}; do
 done
 
 if [ "$not_installed" = "1" ]; then
-    exit 3
+    failures 4
 fi
-#### End Check MK404 dependencies
+}
+#### End: Check MK404 dependencies
 
-#### Set build environment 
+#### Start: Set build environment 
+set_build_env_variables()
+{
 MK404_SCRIPT_PATH="$( cd "$(dirname "$0")" ; pwd -P )"
 MK404_URL="https://github.com/vintagepc/MK404.git"
 MK404_owner="vintagepc"
 MK404_project="MK404"
 MK404_PATH="$MK404_SCRIPT_PATH/../MK404/master"
 MK404_BUILD_PATH="$MK404_PATH/build"
+}
+#### End: Set build environment
 
-
-# List few useful data
+#### Start: List few useful data
+output_useful_data()
+{
 echo
 echo "Script path :" $MK404_SCRIPT_PATH
 echo "OS          :" $TARGET_OS
 echo ""
 echo "MK404 path  :" $MK404_PATH
+}
+#### End: List few useful data
 
-# Clone MK404 if needed
+#### Start: Clone MK404 if needed
+get_MK404()
+{
 if [ ! -d $MK404_PATH ]; then
     #release_url=$(curl -Ls -o /dev/null -w %{url_effective} https://github.com/$MK404_owner/$MK404_project/releases/latest)
     #release_tag=$(basename $release_url)
     #git clone -b $release_tag -- https://github.com/$MK404_owner/$MK404_project.git $MK404_PATH
     git clone $MK404_URL $MK404_PATH
 fi
+}
+#### End: Clone MK404 if needed
 
-# 
-cd $MK404_PATH
-
-#Check MK404 agruments
-#Set Check for updates as default
-check_flag=1
-#Check mk404_printer_flag
-if [ ! -z $mk404_printer_flag ]; then
-    if [[ "$mk404_printer_flag" == "MK3" || "$mk404_printer_flag" == "MK3S" || "$mk404_printer_flag" == "MK25" || "$mk404_printer_flag" == "MK25S" ]]; then
-        MK404_PRINTER_TEMP=$mk404_printer_flag
-    else
-        echo "Following Printers are supported: MK25, MK25S, MK3 and MK3S"
-        exit 4
-    fi
-fi
-
-#Check if Build is selected with argument '-f'
-if [ ! -z "$board_flash_flag" ] ; then
-    if [ "$board_flash_flag" == "256" ] ; then
-        BOARD_FLASH="0x3FFFF"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
-    elif [ "$board_flash_flag" == "384" ] ; then
-        BOARD_FLASH="0x5FFFF"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
-    elif [ "$board_flash_flag" == "512" ] ; then
-        BOARD_FLASH="0x7FFFF"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
-    elif [ "$board_flash_flag" == "1024" ] ; then
-        BOARD_FLASH="0xFFFFF"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_FLASH (hex)"
-    elif [[ "$board_flash_flag" == "32M" || "$board_flash_flag" == "32768" ]] ; then
-        BOARD_FLASH="0x1FFFFFF"
-        echo "Board flash size :    32 Mb, $BOARD_FLASH (hex)"
-    else
-        echo "Unsupported board flash size chosen. Only '256', '384', '512', '1024' and '32M' are allowed."
-        exit 5
-    fi
-fi
-
-#Check if Build is selected with argument '-x'
-if [ ! -z "$board_mem_flag" ] ; then
-    if [ "$board_mem_flag" == "8" ] ; then
-        BOARD_MEM="0x21FF"
-        echo "Board mem size   :     $board_mem_flag Kb, $BOARD_MEM (hex)"
-    elif [ "$board_mem_flag" == "64" ] ; then
-        BOARD_MEM="0xFFFF"
-        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
-    else
-        echo "Unsupported board mem size chosen. Only '8', '64' are allowed."
-        exit 6
-    fi
-fi
-
-
-if [ "$new_build_flag" == "1" ]; then
-    check_flag=1
-    update_flag=1
-fi
-if [ "$update_flag" == "1" ]; then
-    check_flag=1
-fi
-
-#End Check MK404 agruments
-
-#Check for updates
+#### Start: Check for updates
+check_for_updates()
+{
 if [ "$check_flag" == "1" ]; then
     if [ -d $MK404_BUILD_PATH ]; then
         cd $MK404_BUILD_PATH
@@ -256,10 +396,14 @@ if [ "$check_flag" == "1" ]; then
     MK404_local_GIT_COMMIT_HASH=$(git log --pretty=format:"%H" -1)
 # Get local Commit_Number
     MK404_local_GIT_COMMIT_NUMBER=$(git rev-list HEAD --count)
+# Get latest release
+    MK404_release_url=$(curl -Ls -o /dev/null -w %{url_effective} https://github.com/$MK404_owner/$MK404_project/releases/latest)
+    MK404_release_tag=$(basename $MK404_release_url)
 # Get remote Commit_Hash
-    MK404_remote_GIT_COMMIT_HASH=$(git ls-remote --heads $(git config --get remote.origin.url) | grep "refs/heads/master" | cut -f 1)
+    #MK404_remote_GIT_COMMIT_HASH=$(git ls-remote --heads $(git config --get remote.origin.url) | grep "refs/heads/master" | cut -f 1)
+    MK404_remote_GIT_COMMIT_HASH=$(git ls-remote | grep "refs/tags/$MK404_release_tag"  | cut -f 1)
 # Get remote Commit_Number
-    MK404_remote_GIT_COMMIT_NUMBER=$(git rev-list origin/master --count)
+    MK404_remote_GIT_COMMIT_NUMBER=$(git rev-list $MK404_release_tag --count)
 # Output
     echo ""
     echo "Current version         : $MK404_current_version"
@@ -271,8 +415,9 @@ if [ "$check_flag" == "1" ]; then
     else
         echo "$(tput setaf 2)"
     fi
-    echo "Current remote hash     : $MK404_remote_GIT_COMMIT_HASH"
-    echo "Current remote commit nr: $MK404_remote_GIT_COMMIT_NUMBER"
+    echo "Latest release tag      : $MK404_release_tag"
+    echo "Latest release hash     : $MK404_remote_GIT_COMMIT_HASH"
+    echo "Latest remote commit nr : $MK404_remote_GIT_COMMIT_NUMBER"
     echo "$(tput sgr 0)"
 
 # Check for updates
@@ -287,8 +432,12 @@ if [ "$check_flag" == "1" ]; then
         fi
     fi
 fi
+}
+#### End: Check for updates
 
-# Fetch updates and force new build
+#### Start: Fetch updates and force new build
+fetch_updates()
+{
 if [ "$update_flag" == "1" ]; then
     if [ ! -z $MK404_remote_GIT_COMMIT_HASH ]; then
         if [ "$MK404_local_GIT_COMMIT_HASH" != "$MK404_remote_GIT_COMMIT_HASH" ]; then
@@ -296,19 +445,28 @@ if [ "$update_flag" == "1" ]; then
             git fetch --all
             read -t 10 -p "$(tput setaf 2)Updating MK404 !$(tput sgr 0)"
             echo ""
-            git reset --hard origin/master
+            git reset --hard $MK404_release_tag
             read -t 10 -p "$(tput setaf 2)Compiling MK404 !$(tput sgr 0)"
             echo ""
             new_build_flag=1
         fi
     fi
 fi
+}
+#### End: Fetch updates and force new build
 
-# Prepare MK404
+#### Start: Prepare MK404 build
+prepare_MK404()
+{
 if [ ! -d $MK404_BUILD_PATH ]; then
     mkdir -p $MK404_BUILD_PATH
 fi
+}
+#### End: Prepare MK404 build
 
+#### Start: Build MK404
+build_MK404()
+{
 if [[ ! -f "$MK404_BUILD_PATH/Makefile" || "$new_build_flag" == "1" ]]; then
 # Init and update submodules
     if [ -d $MK404_BUILD_PATH ]; then
@@ -335,112 +493,13 @@ if [[ ! -f "$MK404_BUILD_PATH/Prusa_MK3S_SDcard.bin" || "$new_build_flag" == "1"
     cmake --build $MK404_BUILD_PATH --config Release --target Prusa_MK3SMMU2_SDcard.bin
     cmake --build $MK404_BUILD_PATH --config Release --target Prusa_MK3MMU2_SDcard.bin
 fi
+}
+#### End: Build MK404
 
 
-# Prepare run MK404
-#Check MK404_Printer
-if [ ! -z $firmware_version_flag ]; then
-    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK3')
-    if [ ! -z $MK404_PRINTER_TEMP ]; then
-        MK404_PRINTER=MK3
-    fi
-    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK3S')
-    if [ ! -z $MK404_PRINTER_TEMP ]; then
-        MK404_PRINTER=MK3S
-    fi
-    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK25')
-    if [ ! -z $MK404_PRINTER_TEMP ]; then
-        MK404_PRINTER=MK25
-    fi
-    MK404_PRINTER_TEMP=$(echo $firmware_version_flag | sed 's/\(.*\)\///' | grep 'MK25S')
-    if [ ! -z $MK404_PRINTER_TEMP ]; then
-        MK404_PRINTER=MK25S
-    fi
-else
-    echo "No firmware version file selected!"
-    echo "Add argument -f with path and hex filename to start MK404"
-    exit 7
-fi
-
-if [ -z "$MK404_PRINTER" ]; then
-    echo "Tried to determine MK404 printer from hex file, but failed!"
-    echo "Add argument -p with 'MK25', 'MK25S', 'MK3' or 'MK3S' to start MK404"
-    exit 8
-fi
-
-if [ ! -z $mk404_printer_flag ]; then
-    if [ "$mk404_printer_flag" != "$MK404_PRINTER" ]; then
-        echo "$(tput setaf 3)You defined a different printer type than the firmware!"
-        echo "This can cause unexpected issues.$(tput sgr 0)"
-        echo 
-        PS3="Select $(tput setaf 2)printer$(tput sgr 0) you want to use."
-        select which in "$(tput setaf 2)$MK404_PRINTER$(tput sgr 0)" "$mk404_printer_flag"; do
-            case $which in
-                $MK404_PRINTER)
-                    echo "Set $MK404_PRINTER as printer"
-                    break
-                    ;;
-                $mk404_printer_flag)
-                    echo "Set $(tput setaf 3)$mk404_printer_flag$(tput sgr 0) as printer"
-                    echo "$(tput setaf 3)This firmware file isn't correct for this printer!!!$(tput sgr 0)"
-                    echo 
-                    MK404_PRINTER=$mk404_printer_flag
-                    read -p "Press Enter to continue."
-                    break
-                    ;;
-                *)
-                    break
-                    ;;
-            esac
-        done
-    fi
-fi
-
-if [ -z $MK404_PRINTER ]; then
-    exit 9
-fi
-
-if [[ "$MK404_PRINTER" == "MK25" || "$MK404_PRINTER" == "MK25S" ]]; then
-    MK404_PRINTER="${MK404_PRINTER}_mR13"
-else
-    if [ "$mk404_flag" == "2" ]; then # Check if MMU2 is selected only for MK3/S
-        MK404_PRINTER="${MK404_PRINTER}MMU2"
-    fi
-fi
-
-# Run MK404 with 'debugcore' and/or 'bootloader-file'
-    if [[ ! -z $MK404_DEBUG && "$MK404_DEBUG" == "atmega404" || ! -z $BOARD_MEM && "$BOARD_MEM" == "0xFFFF" ]]; then
-        MK404_options="--debugcore"
-    fi
-    if [[ ! -z $MK404_DEBUG && "$MK404_DEBUG" == "atmega404_no_bootloader"  || ! -z $BOARD_FLASH && "$BOARD_FLASH" != "0x3FFFF" ]]; then
-        MK404_options='--debugcore --bootloader-file ""'
-    fi
-
-# Run MK404 with graphics
-    if [ ! -z "$mk404_graphics_flag" ]; then
-        if [ ! -z "$MK404_options" ]; then
-            MK404_options="${MK404_options} -g "
-        else
-            MK404_options=" -g "
-        fi
-        if [[ "$mk404_graphics_flag" == "1" || "$mk404_graphics_flag" == "lite" || "$mk404_graphics_flag" == "3" ]]; then
-            MK404_options="${MK404_options}lite"
-        elif [[ "$mk404_graphics_flag" == "2" || "$mk404_graphics_flag" == "fancy" || "$mk404_graphics_flag" == "4" ]]; then
-            MK404_options="${MK404_options}fancy"
-        else
-            echo "$(tput setaf 1)Unsupported MK404 graphics option $mk404_graphics_flag$(tput sgr 0)"
-        fi
-        if [[ "$mk404_graphics_flag" == "3" || "$mk404_graphics_flag" == "4" ]]; then
-            MK404_options="${MK404_options} --colour-extrusion --extrusion Quad_HR"
-        else
-            MK404_options="${MK404_options} --extrusion Line"
-        fi
-    fi
-if [ ! -z $firmware_version_flag ]; then
-    MK404_firmware_file=" -f $firmware_version_flag"
-fi
-
-#Run MK404 SIM
+#### Start: Run MK404 SIM
+run_MK404_SIM()
+{
 if [ ! -z $mk404_flag ]; then
     # Output some useful data
     echo "Printer     : $MK404_PRINTER"
@@ -459,4 +518,29 @@ if [ ! -z $mk404_flag ]; then
     sleep 5
     ./MK404 Prusa_$MK404_PRINTER -s --terminal $MK404_options $MK404_firmware_file || exit 10
 fi
-#### End of MK404 Simulator
+}
+#### End: Run MK404 SIM
+
+#### Check OS and needed packages
+echo "Check OS"
+check_OS
+check_packages
+
+#### Check for options/flags
+echo "Check for options"
+
+#### Prepare build environment
+echo "Prepare build env"
+set_build_env_variables
+output_useful_data
+get_MK404
+
+# 
+cd $MK404_PATH
+
+check_for_updates
+fetch_updates
+prepare_MK404
+build_MK404
+run_MK404_SIM
+#### End of MK404 Simulator

PF-build.sh

@@ -56,7 +56,7 @@
 #   Some may argue that this is only used by a script, BUT as soon someone accidentally or on purpose starts Arduino IDE
 #   it will use the default Arduino IDE folders and so can corrupt the build environment.
 #
-# Version: 2.0.0-Build_61
+# Version: 2.0.0-Build_63
 # Change log:
 # 12 Jan 2019, 3d-gussner, Fixed "compiler.c.elf.flags=-w -Os -Wl,-u,vfprintf -lprintf_flt -lm -Wl,--gc-sections" in 'platform.txt'
 # 16 Jan 2019, 3d-gussner, Build_2, Added development check to modify 'Configuration.h' to prevent unwanted LCD messages that Firmware is unknown
@@ -191,6 +191,177 @@ esac
 }
 #### End: Failures
 
+#### Start: Check for options/flags
+##check_options()
+##{
+while getopts b:c:d:g:h:i:j:l:m:n:o:p:v:x:y:?h flag
+    do
+        case "${flag}" in
+            b) build_flag=${OPTARG};;
+            c) clean_flag=${OPTARG};;
+            d) devel_flag=${OPTARG};;
+            g) mk404_graphics_flag=${OPTARG};;
+            h) help_flag=1;;
+            i) IDE_flag=${OPTARG};;
+            j) verbose_IDE_flag=${OPTARG};;
+            l) language_flag=${OPTARG};;
+            m) mk404_flag=${OPTARG};;
+            n) new_build_flag=${OPTARG};;
+            o) output_flag=${OPTARG};;
+            p) prusa_flag=${OPTARG};;
+            v) variant_flag=${OPTARG};;
+            x) board_mem_flag=${OPTARG};;
+            y) board_flash_flag=${OPTARG};;
+            ?) help_flag=1;;
+        esac
+    done
+
+#
+# '?' 'h' argument usage and help
+if [ "$help_flag" == "1" ] ; then
+echo "***************************************"
+echo "* PF-build.sh Version: 2.0.0-Build_63 *"
+echo "***************************************"
+echo "Arguments:"
+echo "$(tput setaf 2)-b$(tput sgr0) Build/commit number"
+echo "$(tput setaf 2)-c$(tput sgr0) Do not clean up lang build"
+echo "$(tput setaf 2)-d$(tput sgr0) Devel build"
+echo "$(tput setaf 2)-g$(tput sgr0) Start MK404 graphics"
+echo "$(tput setaf 2)-i$(tput sgr0) Arduino IDE version"
+echo "$(tput setaf 2)-j$(tput sgr0) Arduino IDE verbose output"
+echo "$(tput setaf 2)-l$(tput sgr0) Languages"
+echo "$(tput setaf 2)-m$(tput sgr0) Start MK404 sim"
+echo "$(tput setaf 2)-n$(tput sgr0) New fresh build"
+echo "$(tput setaf 2)-o$(tput sgr0) Output"
+echo "$(tput setaf 2)-p$(tput sgr0) Keep Configuration_prusa.h"
+echo "$(tput setaf 2)-v$(tput sgr0) Variant"
+echo "$(tput setaf 2)-x$(tput sgr0) Board memory size"
+echo "$(tput setaf 2)-y$(tput sgr0) Board flash size"
+echo "$(tput setaf 2)-?$(tput sgr0) Help"
+echo
+echo "Brief USAGE:"
+echo "  $(tput setaf 2)./PF-build.sh$(tput sgr0) [-b] [-c] [-d] [-g] [-i] [-j] [-l] [-m] [-n] [-o] [-p ] -[v] [-x] [-y] [-h] [-?]"
+echo
+echo "  -b : '$(tput setaf 2)Auto$(tput sgr0)' needs git or a number"
+echo "  -c : '$(tput setaf 2)0$(tput sgr0)' clean up, '$(tput setaf 2)1$(tput sgr0)' keep"
+echo "  -d : '$(tput setaf 2)GOLD$(tput sgr0)', '$(tput setaf 2)RC$(tput sgr0)', '$(tput setaf 2)BETA$(tput sgr0)', '$(tput setaf 2)ALPHA$(tput sgr0)', '$(tput setaf 2)DEBUG$(tput sgr0)', '$(tput setaf 2)DEVEL$(tput sgr0)' and '$(tput setaf 2)UNKNOWN$(tput sgr0)'"
+echo "  -g : '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' lite '$(tput setaf 2)2$(tput sgr0)' fancy  '$(tput setaf 2)3$(tput sgr0)' lite  with Quad_HR '$(tput setaf 2)4$(tput sgr0)' fancy with Quad_HR"
+echo "  -i : '$(tput setaf 2)1.8.5$(tput sgr0)', '$(tput setaf 2)1.8.13$(tput sgr0)'"
+echo "  -j : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
+echo "  -l : '$(tput setaf 2)ALL$(tput sgr0)' for multi language or '$(tput setaf 2)EN_ONLY$(tput sgr0)' for English only"
+echo "  -m : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes '$(tput setaf 2)2$(tput sgr0)' with MMU2"
+echo "  -n : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
+echo "  -o : '$(tput setaf 2)1$(tput sgr0)' force or '$(tput setaf 2)0$(tput sgr0)' block output and delays"
+echo "  -p : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
+echo "  -v : '$(tput setaf 2)All$(tput sgr0)' or variant file name"
+echo "  -x : '$(tput setaf 2)8$(tput sgr0)' or '$(tput setaf 2)64$(tput sgr0)' Kb."
+echo "  -y : '$(tput setaf 2)256$(tput sgr0)','$(tput setaf 2)384$(tput sgr0)','$(tput setaf 2)512$(tput sgr0)','$(tput setaf 2)1024$(tput sgr0)''$(tput setaf 2)32M$(tput sgr0)'"
+echo
+echo "Example:"
+echo "  $(tput setaf 2)./PF-build.sh -v All -l ALL -d GOLD$(tput sgr0)"
+echo "  Will build all variants as multi language and final GOLD version"
+echo
+echo "  $(tput setaf 2) ./PF-build.sh -v 1_75mm_MK3S-EINSy10a-E3Dv6full.h -b Auto -l ALL -d GOLD -o 1 -c 1 -p 1 -n 1$(tput sgr0)"
+echo "  Will build MK3S multi language final GOLD firmware "
+echo "  with current commit count number and output extra information,"
+echo "  not delete lang build temporary files, keep Configuration_prusa.h and build with new fresh build folder."
+echo
+exit 6
+fi
+
+#Check if verbose_IDE is selected with argument '-j'
+
+if [ ! -z "$verbose_IDE_flag" ]; then
+    if [ $verbose_IDE_flag == "1" ]; then
+        verbose_IDE="1"
+    elif [ $verbose_IDE_flag == "0" ]; then
+        verbose_IDE="0"
+    else
+        echo "Only '0' and '1' are valid verbose_IDE values."
+        failures 5
+    fi
+else
+    verbose_IDE="0"
+fi  
+
+#Check if Build is selected with argument '-f'
+if [ ! -z "$board_flash_flag" ] ; then
+    if [ "$board_flash_flag" == "256" ] ; then
+        BOARD_FLASH="0x3FFFF"
+        BOARD_maximum_size="253952"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
+    elif [ "$board_flash_flag" == "384" ] ; then
+        BOARD_FLASH="0x5FFFF"
+        BOARD_maximum_size="385024"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
+
+    elif [ "$board_flash_flag" == "512" ] ; then
+        BOARD_FLASH="0x7FFFF"
+        BOARD_maximum_size="516096"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
+    elif [ "$board_flash_flag" == "1024" ] ; then
+        BOARD_FLASH="0xFFFFF"
+        BOARD_maximum_size="1040384"
+        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
+    elif [[ "$board_flash_flag" == "32M" || "$board_flash_flag" == "32768" ]] ; then
+        BOARD_FLASH="0x1FFFFFF"
+        BOARD_maximum_size="33546240"
+        echo "Board flash size :    32 Mb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
+    else
+        echo "Unsupported board flash size chosen. Only '256', '384', '512', '1024' and '32M' are allowed."
+        failures 5
+    fi
+fi
+
+#Check if Build is selected with argument '-x'
+if [ ! -z "$board_mem_flag" ] ; then
+    if [ "$board_mem_flag" == "8" ] ; then
+        BOARD_MEM="0x21FF"
+        echo "Board mem size   :     $board_mem_flag Kb, $BOARD_MEM (hex)"
+    elif [ "$board_mem_flag" == "16" ] ; then
+        BOARD_MEM="0x3DFF"
+        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
+    elif [ "$board_mem_flag" == "32" ] ; then
+        BOARD_MEM="0x7DFF"
+        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
+    elif [ "$board_mem_flag" == "64" ] ; then
+        BOARD_MEM="0xFFFF"
+        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
+        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
+    else
+        echo "Unsupported board mem size chosen. Only '8', '64' are allowed."
+        failures 5
+    fi
+fi
+
+#Start: Check if Arduino IDE version is correct
+if [ ! -z "$IDE_flag" ]; then
+    if [[ "$IDE_flag" == "1.8.5" || "$IDE_flag" == "1.8.13" ]]; then
+        ARDUINO_ENV="${IDE_flag}"
+    else
+        ARDUINO_ENV="1.8.5"
+    fi
+else
+    ARDUINO_ENV="1.8.5"
+fi
+#End: Check if Arduino IDE version is correct
+
+#Start: Check if Output is selecetd via argument '-o' 
+if [[ -z "$output_flag" || "$output_flag" == 1 ]] ; then
+    OUTPUT=1
+else
+    OUTPUT=0
+fi
+#End: Check if Output is selecetd via argument '-o' 
+##}
+#### End: Check for options/flags
+
 #### Start: Make backup of Configuration.h
 make_backup1()
 {
@@ -357,158 +528,6 @@ fi
 }
 #End: Check gawk ... needed during language build
 
-#### Start: Check for options/flags
-while getopts b:c:d:g:h:i:j:l:m:n:o:p:v:x:y:?h flag
-    do
-        case "${flag}" in
-            b) build_flag=${OPTARG};;
-            c) clean_flag=${OPTARG};;
-            d) devel_flag=${OPTARG};;
-            g) mk404_graphics_flag=${OPTARG};;
-            h) help_flag=1;;
-            i) IDE_flag=${OPTARG};;
-            j) verbose_IDE_flag=${OPTARG};;
-            l) language_flag=${OPTARG};;
-            m) mk404_flag=${OPTARG};;
-            n) new_build_flag=${OPTARG};;
-            o) output_flag=${OPTARG};;
-            p) prusa_flag=${OPTARG};;
-            v) variant_flag=${OPTARG};;
-            x) board_mem_flag=${OPTARG};;
-            y) board_flash_flag=${OPTARG};;
-            ?) help_flag=1;;
-        esac
-    done
-
-#
-# '?' 'h' argument usage and help
-if [ "$help_flag" == "1" ] ; then
-echo "***************************************"
-echo "* PF-build.sh Version: 2.0.0-Build_61 *"
-echo "***************************************"
-echo "Arguments:"
-echo "$(tput setaf 2)-b$(tput sgr0) Build/commit number"
-echo "$(tput setaf 2)-c$(tput sgr0) Do not clean up lang build"
-echo "$(tput setaf 2)-d$(tput sgr0) Devel build"
-echo "$(tput setaf 2)-g$(tput sgr0) Start MK404 graphics"
-echo "$(tput setaf 2)-i$(tput sgr0) Arduino IDE version"
-echo "$(tput setaf 2)-j$(tput sgr0) Arduino IDE verbose output"
-echo "$(tput setaf 2)-l$(tput sgr0) Languages"
-echo "$(tput setaf 2)-m$(tput sgr0) Start MK404 sim"
-echo "$(tput setaf 2)-n$(tput sgr0) New fresh build"
-echo "$(tput setaf 2)-o$(tput sgr0) Output"
-echo "$(tput setaf 2)-p$(tput sgr0) Keep Configuration_prusa.h"
-echo "$(tput setaf 2)-v$(tput sgr0) Variant"
-echo "$(tput setaf 2)-x$(tput sgr0) Board memory size"
-echo "$(tput setaf 2)-y$(tput sgr0) Board flash size"
-echo "$(tput setaf 2)-?$(tput sgr0) Help"
-echo
-echo "Brief USAGE:"
-echo "  $(tput setaf 2)./PF-build.sh$(tput sgr0) [-b] [-c] [-d] [-g] [-i] [-j] [-l] [-m] [-n] [-o] [-p ] -[v] [-x] [-y] [-h] [-?]"
-echo
-echo "  -b : '$(tput setaf 2)Auto$(tput sgr0)' needs git or a number"
-echo "  -c : '$(tput setaf 2)0$(tput sgr0)' clean up, '$(tput setaf 2)1$(tput sgr0)' keep"
-echo "  -d : '$(tput setaf 2)GOLD$(tput sgr0)', '$(tput setaf 2)RC$(tput sgr0)', '$(tput setaf 2)BETA$(tput sgr0)', '$(tput setaf 2)ALPHA$(tput sgr0)', '$(tput setaf 2)DEBUG$(tput sgr0)', '$(tput setaf 2)DEVEL$(tput sgr0)' and '$(tput setaf 2)UNKNOWN$(tput sgr0)'"
-echo "  -g : '$(tput setaf 2)0$(tput sgr0)' no '$(tput setaf 2)1$(tput sgr0)' lite '$(tput setaf 2)2$(tput sgr0)' fancy  '$(tput setaf 2)3$(tput sgr0)' lite  with Quad_HR '$(tput setaf 2)4$(tput sgr0)' fancy with Quad_HR"
-echo "  -i : '$(tput setaf 2)1.8.5$(tput sgr0)', '$(tput setaf 2)1.8.13$(tput sgr0)'"
-echo "  -j : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
-echo "  -l : '$(tput setaf 2)ALL$(tput sgr0)' for multi language or '$(tput setaf 2)EN_ONLY$(tput sgr0)' for English only"
-echo "  -m : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes '$(tput setaf 2)2$(tput sgr0)' with MMU2"
-echo "  -n : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
-echo "  -o : '$(tput setaf 2)1$(tput sgr0)' force or '$(tput setaf 2)0$(tput sgr0)' block output and delays"
-echo "  -p : '$(tput setaf 2)0$(tput sgr0)' no, '$(tput setaf 2)1$(tput sgr0)' yes"
-echo "  -v : '$(tput setaf 2)All$(tput sgr0)' or variant file name"
-echo "  -x : '$(tput setaf 2)8$(tput sgr0)' or '$(tput setaf 2)64$(tput sgr0)' Kb."
-echo "  -y : '$(tput setaf 2)256$(tput sgr0)','$(tput setaf 2)384$(tput sgr0)','$(tput setaf 2)512$(tput sgr0)','$(tput setaf 2)1024$(tput sgr0)''$(tput setaf 2)32M$(tput sgr0)'"
-echo
-echo "Example:"
-echo "  $(tput setaf 2)./PF-build.sh -v All -l ALL -d GOLD$(tput sgr0)"
-echo "  Will build all variants as multi language and final GOLD version"
-echo
-echo "  $(tput setaf 2) ./PF-build.sh -v 1_75mm_MK3S-EINSy10a-E3Dv6full.h -b Auto -l ALL -d GOLD -o 1 -c 1 -p 1 -n 1$(tput sgr0)"
-echo "  Will build MK3S multi language final GOLD firmware "
-echo "  with current commit count number and output extra information,"
-echo "  not delete lang build temporary files, keep Configuration_prusa.h and build with new fresh build folder."
-echo
-exit 6
-fi
-
-#Check if verbose_IDE is selected with argument '-j'
-
-if [ ! -z "$verbose_IDE_flag" ]; then
-    if [ $verbose_IDE_flag == "1" ]; then
-        verbose_IDE="1"
-    elif [ $verbose_IDE_flag == "0" ]; then
-        verbose_IDE="0"
-    else
-        echo "Only '0' and '1' are valid verbose_IDE values."
-        failures 5
-    fi
-else
-    verbose_IDE="0"
-fi  
-
-#Check if Build is selected with argument '-f'
-if [ ! -z "$board_flash_flag" ] ; then
-    if [ "$board_flash_flag" == "256" ] ; then
-        BOARD_FLASH="0x3FFFF"
-        BOARD_maximum_size="253952"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
-    elif [ "$board_flash_flag" == "384" ] ; then
-        BOARD_FLASH="0x5FFFF"
-        BOARD_maximum_size="385024"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
-        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
-
-    elif [ "$board_flash_flag" == "512" ] ; then
-        BOARD_FLASH="0x7FFFF"
-        BOARD_maximum_size="516096"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
-        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
-    elif [ "$board_flash_flag" == "1024" ] ; then
-        BOARD_FLASH="0xFFFFF"
-        BOARD_maximum_size="1040384"
-        echo "Board flash size :   $board_flash_flag Kb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
-        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
-    elif [[ "$board_flash_flag" == "32M" || "$board_flash_flag" == "32768" ]] ; then
-        BOARD_FLASH="0x1FFFFFF"
-        BOARD_maximum_size="33546240"
-        echo "Board flash size :    32 Mb, $BOARD_maximum_size bytes, $BOARD_FLASH (hex)"
-        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_FLASH-$board_flash_flag"
-    else
-        echo "Unsupported board flash size chosen. Only '256', '384', '512', '1024' and '32M' are allowed."
-        failures 5
-    fi
-fi
-
-#Check if Build is selected with argument '-x'
-if [ ! -z "$board_mem_flag" ] ; then
-    if [ "$board_mem_flag" == "8" ] ; then
-        BOARD_MEM="0x21FF"
-        echo "Board mem size   :     $board_mem_flag Kb, $BOARD_MEM (hex)"
-    elif [ "$board_mem_flag" == "64" ] ; then
-        BOARD_MEM="0xFFFF"
-        echo "Board mem size   :    $board_mem_flag Kb, $BOARD_MEM (hex)"
-        OUTPUT_FILENAME_SUFFIX="${OUTPUT_FILENAME_SUFFIX}_RAM-$board_mem_flag"
-    else
-        echo "Unsupported board mem size chosen. Only '8', '64' are allowed."
-        failures 5
-    fi
-fi
-
-#Start: Check if Arduino IDE version is correct
-if [ ! -z "$IDE_flag" ]; then
-    if [[ "$IDE_flag" == "1.8.5" || "$IDE_flag" == "1.8.13" ]]; then
-        ARDUINO_ENV="${IDE_flag}"
-    else
-        ARDUINO_ENV="1.8.5"
-    fi
-else
-    ARDUINO_ENV="1.8.5"
-fi
-#End: Check if Arduino IDE version is correct
-#### End: Check for options/flags
-
 #### Start: Set build environment 
 set_build_env_variables()
 {
@@ -898,13 +917,6 @@ if [ ! -z "$build_flag" ] ; then
     echo "New Build number is: $BUILD"
 fi
 
-#Check if Output is selecetd via argument '-o' 
-if [[ -z "$output_flag" || "$output_flag" == 1 ]] ; then
-    OUTPUT=1
-else
-    OUTPUT=0
-fi
-
 #Check git branch has changed
 if [ ! -z "git_available" ]; then
     BRANCH=""