Lang - text "open failed, File: " removed from dictionary

Firmware/cardreader.cpp

@@ -330,7 +330,7 @@ void CardReader::diveSubfolder (const char *fileName, SdFile& dir)
                 SERIAL_ECHOLN(subdirname);
                 if (!dir.open(curDir, subdirname, O_READ))
                 {
-                    SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
+                    SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
                     SERIAL_PROTOCOL(subdirname);
                     SERIAL_PROTOCOLLNPGM(".");
                     return;
@@ -431,7 +431,7 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
     }
     else
     {
-      SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
+      SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
       SERIAL_PROTOCOL(fname);
       SERIAL_PROTOCOLLNPGM(".");
     }
@@ -440,7 +440,7 @@ void CardReader::openFile(const char* name,bool read, bool replace_current/*=tru
   { //write
     if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
     {
-      SERIAL_PROTOCOLRPGM(_T(MSG_SD_OPEN_FILE_FAIL));
+      SERIAL_PROTOCOLRPGM(MSG_SD_OPEN_FILE_FAIL);
       SERIAL_PROTOCOL(fname);
       SERIAL_PROTOCOLLNPGM(".");
     }

Firmware/messages.c

@@ -72,7 +72,6 @@ const char MSG_RECOVER_PRINT[] PROGMEM_I1 = ISTR("Blackout occurred. Recover pri
 const char MSG_REFRESH[] PROGMEM_I1 = ISTR("\xF8" "Refresh"); ////c=0 r=0
 const char MSG_RESUMING_PRINT[] PROGMEM_I1 = ISTR("Resuming print"); ////c=0 r=0
 const char MSG_REMOVE_STEEL_SHEET[] PROGMEM_I1 = ISTR("Please remove steel sheet from heatbed."); ////c=20 r=4
-const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_I1 = ISTR("open failed, File: "); ////c=0 r=0
 const char MSG_SELFTEST_COOLING_FAN[] PROGMEM_I1 = ISTR("Front print fan?"); ////c=20 r=0
 const char MSG_SELFTEST_EXTRUDER_FAN[] PROGMEM_I1 = ISTR("Left hotend fan?"); ////c=20 r=0
 const char MSG_SELFTEST_FAILED[] PROGMEM_I1 = ISTR("Selftest failed  "); ////c=20 r=0
@@ -122,3 +121,4 @@ const char MSG_Enqueing[] PROGMEM_N1 = "enqueing \""; ////c=0 r=0
 const char MSG_ENDSTOPS_HIT[] PROGMEM_N1 = "endstops hit: "; ////c=0 r=0
 const char MSG_SD_ERR_WRITE_TO_FILE[] PROGMEM_N1 = "error writing to file"; ////c=0 r=0
 const char MSG_OK[] PROGMEM_N1 = "ok"; ////c=0 r=0
+const char MSG_SD_OPEN_FILE_FAIL[] PROGMEM_N1 = "open failed, File: "; ////c=0 r=0

Firmware/messages.h

@@ -73,7 +73,6 @@ extern const char MSG_RECOVER_PRINT[];
 extern const char MSG_REFRESH[];
 extern const char MSG_REMOVE_STEEL_SHEET[];
 extern const char MSG_RESUMING_PRINT[];
-extern const char MSG_SD_OPEN_FILE_FAIL[];
 extern const char MSG_SD_WORKDIR_FAIL[];
 extern const char MSG_SELFTEST_COOLING_FAN[];
 extern const char MSG_SELFTEST_EXTRUDER_FAN[];
@@ -123,6 +122,7 @@ extern const char MSG_Enqueing[];
 extern const char MSG_ENDSTOPS_HIT[];
 extern const char MSG_SD_ERR_WRITE_TO_FILE[];
 extern const char MSG_OK[];
+extern const char MSG_SD_OPEN_FILE_FAIL[];
 
 #if defined(__cplusplus)
 }

lang/lang_en.txt

@@ -556,9 +556,6 @@
 #MSG_DEFAULT_SETTINGS_LOADED c=20 r=4
 "Old settings found. Default PID, Esteps etc. will be set."
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 

lang/lang_en_cz.txt

@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-"nelze otevrit, Soubor: "
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 "otevrit"

lang/lang_en_de.txt

@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt."
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-"Fehler beim Oeffnen der Datei: "
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 "offen"

lang/lang_en_es.txt

@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Se han encontrado ajustes anteriores. Se ajustara el PID, los pasos del extrusor, etc"
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-"error apertura, Arch.: "
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 "abrir"

lang/lang_en_fr.txt

@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront pris."
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-"Echec ouverture, Fichier :"
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 "ouvrir"

lang/lang_en_it.txt

@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Sono state trovate impostazioni vecchie. I valori di default di PID, Esteps etc. saranno impostati"
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-"apertura fallita, File: "
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 "apri"

lang/lang_en_pl.txt

@@ -742,10 +742,6 @@
 "Old settings found. Default PID, Esteps etc. will be set."
 "Znaleziono stare ustawienia. Zostana przywrocone domyslne ust. PID, Esteps, itp."
 
-#MSG_SD_OPEN_FILE_FAIL c=0 r=0
-"open failed, File: "
-"niepowodzenie otwarcia, Plik:"
-
 #MSG_ENDSTOP_OPEN c=0 r=0
 "open"
 "otworz"