Add MSG_ALWAYS

Firmware/messages.cpp

@@ -5,6 +5,7 @@
 #include "Configuration_prusa.h"
 
 //internationalized messages
+const char MSG_ALWAYS[] PROGMEM_I1 = ISTR("Always"); ////MSG_ALWAYS c=6
 const char MSG_AUTO_HOME[] PROGMEM_I1 = ISTR("Auto home"); ////MSG_AUTO_HOME c=18
 const char MSG_BABYSTEP_Z[] PROGMEM_I1 = ISTR("Live adjust Z"); ////MSG_BABYSTEP_Z c=18
 const char MSG_BABYSTEP_Z_NOT_SET[] PROGMEM_I1 = ISTR("Distance between tip of the nozzle and the bed surface has not been set yet. Please follow the manual, chapter First steps, section First layer calibration."); ////MSG_BABYSTEP_Z_NOT_SET c=20 r=12

Firmware/messages.h

@@ -11,6 +11,7 @@ extern "C" {
 
 // LCD Menu Messages
 //internationalized messages
+extern const char MSG_ALWAYS[];
 extern const char MSG_AUTO_HOME[];
 extern const char MSG_BABYSTEP_Z[];
 extern const char MSG_BABYSTEP_Z_NOT_SET[];

Firmware/ultralcd.cpp

@@ -4313,7 +4313,7 @@ static void settingsCutter()
 #ifdef MMU_ALWAYS_CUT
         else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED))
         {
-            MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _i("Always"), lcd_cutter_enabled);
+            MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_ALWAYS), lcd_cutter_enabled);
         }
 #endif
         else

lang/po/Firmware.pot

@@ -7,12 +7,12 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr ""
 
@@ -22,7 +22,7 @@ msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ""
@@ -39,17 +39,18 @@ msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -64,23 +65,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr ""
@@ -113,27 +114,27 @@ msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr ""
@@ -148,7 +149,7 @@ msgstr ""
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -160,7 +161,7 @@ msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr ""
@@ -172,17 +173,17 @@ msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr ""
@@ -193,7 +194,7 @@ msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr ""
 
@@ -205,7 +206,7 @@ msgid ""
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr ""
@@ -223,7 +224,7 @@ msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr ""
 
@@ -243,7 +244,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr ""
@@ -259,13 +260,13 @@ msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr ""
@@ -276,7 +277,7 @@ msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr ""
 
@@ -296,7 +297,7 @@ msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr ""
@@ -312,17 +313,17 @@ msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr ""
 
@@ -332,13 +333,13 @@ msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -346,7 +347,7 @@ msgid "Crash det."
 msgstr ""
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr ""
 
@@ -359,13 +360,13 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr ""
@@ -381,7 +382,7 @@ msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -392,7 +393,7 @@ msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet."
 " Please follow the manual, chapter First steps, section First layer "
@@ -412,7 +413,7 @@ msgid "E-correct:"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -422,7 +423,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr ""
@@ -448,13 +449,13 @@ msgid "Endstops"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr ""
@@ -465,14 +466,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr ""
@@ -503,33 +504,33 @@ msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -538,12 +539,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr ""
@@ -554,7 +555,7 @@ msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -571,13 +572,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr ""
@@ -598,7 +599,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr ""
@@ -626,13 +627,13 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again."
@@ -652,14 +653,14 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr ""
@@ -670,7 +671,7 @@ msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr ""
@@ -681,13 +682,13 @@ msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -695,14 +696,14 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
 msgstr ""
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -731,7 +732,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr ""
 
@@ -753,30 +754,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -788,7 +789,7 @@ msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr ""
@@ -799,12 +800,12 @@ msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr ""
 
@@ -814,7 +815,7 @@ msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr ""
@@ -825,7 +826,7 @@ msgid "Load all"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -842,7 +843,7 @@ msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -855,7 +856,7 @@ msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr ""
@@ -871,7 +872,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr ""
@@ -892,7 +893,7 @@ msgid "MMU OK. Resuming..."
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr ""
@@ -903,7 +904,7 @@ msgid "MMU load failed"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr ""
@@ -924,12 +925,12 @@ msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -945,23 +946,23 @@ msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -977,14 +978,14 @@ msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1010,7 +1011,7 @@ msgid "Move axis"
 msgstr ""
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1024,7 +1025,7 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1041,7 +1042,7 @@ msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1050,7 +1051,7 @@ msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1062,7 +1063,7 @@ msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr ""
@@ -1084,7 +1085,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1092,12 +1093,12 @@ msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr ""
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1115,7 +1116,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1127,12 +1128,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1158,7 +1159,7 @@ msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr ""
@@ -1169,7 +1170,7 @@ msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1177,25 +1178,25 @@ msgid ""
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1217,7 +1218,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
@@ -1245,19 +1246,19 @@ msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr ""
 
@@ -1273,7 +1274,7 @@ msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
@@ -1299,13 +1300,13 @@ msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr ""
@@ -1316,12 +1317,12 @@ msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr ""
@@ -1362,18 +1363,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr ""
 
@@ -1393,7 +1394,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First"
 " steps, section Calibration flow."
@@ -1412,7 +1413,7 @@ msgid ""
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1437,7 +1438,7 @@ msgid "Rename"
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1448,13 +1449,13 @@ msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr ""
 
@@ -1481,20 +1482,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
@@ -1511,18 +1512,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr ""
@@ -1558,7 +1559,7 @@ msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr ""
@@ -1584,7 +1585,7 @@ msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1598,7 +1599,7 @@ msgstr ""
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr ""
 
@@ -1617,7 +1618,7 @@ msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr ""
@@ -1640,19 +1641,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr ""
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1664,7 +1665,7 @@ msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr ""
@@ -1680,25 +1681,25 @@ msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1715,7 +1716,7 @@ msgid "Swapped"
 msgstr ""
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1748,30 +1749,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr ""
@@ -1792,13 +1793,13 @@ msgid "Tune"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr ""
@@ -1838,7 +1839,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1865,7 +1866,7 @@ msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -1934,7 +1935,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
@@ -1960,7 +1961,7 @@ msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -1981,7 +1982,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
@@ -1991,7 +1992,7 @@ msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr ""
 
@@ -2021,12 +2022,12 @@ msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr ""
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_cs.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 nebo starsi"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 nebo novejsi"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s ocekavana verze"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Zrusit"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Vse OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Vse je hotovo. Tisku zdar!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Abeceda"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Dojely oba Z voziky k~hornimu dorazu?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Automat."
@@ -126,27 +127,27 @@ msgid "Axis length"
 msgstr "Delka osy"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Zpet"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Podlozka"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Zahrivani bedu"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Bed OK."
@@ -161,7 +162,7 @@ msgstr "Korekce podlozky"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -174,7 +175,7 @@ msgid "Bed/Heater"
 msgstr "Podlozka/Topeni"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Stav remenu"
@@ -186,17 +187,17 @@ msgstr "Test remenu"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Detekovan vypadek proudu.Obnovit tisk?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Jasny"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Podsviceni"
@@ -207,7 +208,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibrace XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibrovat Z"
 
@@ -221,7 +222,7 @@ msgstr ""
 "tlacitkem."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibruji Z"
@@ -241,7 +242,7 @@ msgid "Calibrating home"
 msgstr "Kalibruji vychozi p."
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibrace"
 
@@ -261,7 +262,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Vymenit filament"
@@ -277,13 +278,13 @@ msgid "Changed correctly?"
 msgstr "Vymena ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Kontrola osy X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Kontrola osy Y"
@@ -294,7 +295,7 @@ msgid "Checking Z axis"
 msgstr "Kontrola osy Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Kontrola podlozky"
 
@@ -314,7 +315,7 @@ msgid "Checking hotend"
 msgstr "Kontrola hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Kontrola senzoru"
@@ -330,17 +331,17 @@ msgid "Color not correct"
 msgstr "Barva neni cista"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Komunitni prekl."
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Pokr."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Zchladit"
 
@@ -350,13 +351,13 @@ msgid "Copy selected language?"
 msgstr "Kopirovat vybrany jazyk?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Naraz"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -364,7 +365,7 @@ msgid "Crash det."
 msgstr "Det. narazu"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Detekovan naraz."
 
@@ -380,13 +381,13 @@ msgstr ""
 "Normal modu"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Ustrihnout"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Strihani"
@@ -402,7 +403,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Temny"
 
@@ -413,7 +414,7 @@ msgstr "Vypnout motory"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -436,7 +437,7 @@ msgid "E-correct:"
 msgstr "Korekce E:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "CHYBA:"
 
@@ -446,7 +447,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "CHYBA: Filament senzor nereaguje, zkontrolujte prosim zapojeni."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Vysunout fil."
@@ -472,13 +473,13 @@ msgid "Endstops"
 msgstr "Konc. spinace"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Levy vent.:"
@@ -489,14 +490,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autozav."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS reakce"
@@ -527,33 +528,33 @@ msgid "False triggering"
 msgstr "Falesne spusteni"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Rychlost vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test ventilatoru"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Kontr. vent."
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Vypadky filam."
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -562,12 +563,12 @@ msgstr "Fil. senzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament vytlacen a spravne barvy?"
@@ -578,7 +579,7 @@ msgid "Filament not loaded"
 msgstr "Filament nezaveden"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -595,13 +596,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Soubor nekompletni. Pokracovat?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Dokoncovani pohybu"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Kal. prvni vrstvy"
@@ -624,7 +625,7 @@ msgid "Flow"
 msgstr "Prutok"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Predni tiskovy vent?"
@@ -654,13 +655,13 @@ msgstr ""
 "zrusen."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-code je pripraven pro jiny typ tiskarny. Pokracovat?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -684,14 +685,14 @@ msgstr ""
 "zrusen."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW nastaveni"
@@ -702,7 +703,7 @@ msgid "Heater/Thermistor"
 msgstr "Topeni/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Zahrivani"
@@ -713,13 +714,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Zahrivani preruseno bezpecnostnim casovacem."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Zahrivani OK."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -729,7 +730,7 @@ msgstr ""
 "nastaveni, ve kterem zkalibrujeme osu Z. Pak budete moct zacit tisknout."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -738,7 +739,7 @@ msgstr ""
 "kalibracnim procesem?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -769,7 +770,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Informace"
 
@@ -791,30 +792,30 @@ msgid ""
 msgstr "Vlozte filament (nezavadejte) do extruderu a stisknete tlacitko"
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Je filament zaveden?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Je tiskovy plat na podlozce?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Opakovani"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Posledni tisk"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -826,7 +827,7 @@ msgid "Left"
 msgstr "Vlevo"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Levy vent na trysce?"
@@ -837,12 +838,12 @@ msgid "Left side [μm]"
 msgstr "Vlevo [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Normalni"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Ztlumeny"
 
@@ -852,7 +853,7 @@ msgid "Lin. correction"
 msgstr "Korekce lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Doladeni osy Z"
@@ -863,7 +864,7 @@ msgid "Load all"
 msgstr "Zavest vse"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -880,7 +881,7 @@ msgid "Loading color"
 msgstr "Cisteni barvy"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -893,7 +894,7 @@ msgid "Loose pulley"
 msgstr "Uvolnena remenicka"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Hlasity"
@@ -909,7 +910,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmware detekovan na tiskarne MK3"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU mod"
@@ -930,7 +931,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Pokracuji..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Selhani MMU"
@@ -941,7 +942,7 @@ msgid "MMU load failed"
 msgstr "Zavedeni MMU selhalo"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU selhani zav"
@@ -962,12 +963,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 pripojeno"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Komp. magnetu"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -983,23 +984,23 @@ msgstr "Merene zkos."
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Merim referencni vysku kalibracniho bodu"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1015,14 +1016,14 @@ msgid "Mode change in progress..."
 msgstr "Probiha zmena modu..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1048,7 +1049,7 @@ msgid "Move axis"
 msgstr "Posunout osu"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1062,7 +1063,7 @@ msgid "New firmware version available:"
 msgstr "Vysla nova verze firmware:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1079,7 +1080,7 @@ msgid "No move."
 msgstr "Bez pohybu."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1088,7 +1089,7 @@ msgid "None"
 msgstr "Zadne"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1100,7 +1101,7 @@ msgid "Not connected"
 msgstr "Nezapojeno"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Netoci se"
@@ -1122,7 +1123,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Nyni odstrante testovaci vytisk z tiskoveho platu."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1130,12 +1131,12 @@ msgid "Nozzle"
 msgstr "Tryska"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Tryska"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1153,7 +1154,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Neplatne hodnoty nastaveni. Bude pouzito vychozi PID, Esteps atd."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1165,12 +1166,12 @@ msgid "On"
 msgstr "Zap"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Jednou"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1196,7 +1197,7 @@ msgstr "Nahrivani PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA kal."
@@ -1207,7 +1208,7 @@ msgid "PINDA calibration failed"
 msgstr "PINDA kalibrace selhala"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1217,18 +1218,18 @@ msgstr ""
 "menu Nastaveni->Tepl. kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pozastavit tisk"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1237,7 +1238,7 @@ msgstr ""
 "prvnich 4 bodu. Pokud tryska zachyti papir, okamzite vypnete tiskarnu."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1261,7 +1262,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Prosim ocistete podlozku a stisknete tlacitko."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Pro uspesnou kalibraci ocistete prosim tiskovou trysku. Potvrdte tlacitkem."
@@ -1293,19 +1294,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Prosim otevrete idler a manualne odstrante filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Umistete prosim tiskovy plat na podlozku"
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Pro vysunuti filamentu stisknete prosim tlacitko"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Prosim vyjmete urychlene filament"
 
@@ -1321,7 +1322,7 @@ msgstr "Nejprve prosim sundejte transportni soucastky."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Odstrante prosim tiskovy plat z podlozky."
 
@@ -1347,13 +1348,13 @@ msgstr "Prosim aktualizujte."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Prosim cekejte"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Vypadky proudu"
@@ -1364,12 +1365,12 @@ msgid "Preheat"
 msgstr "Predehrev"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Predehrejte trysku!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Predehrev trysky. Prosim cekejte."
@@ -1410,18 +1411,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Pro pokracovani nahrivani trysky stisknete tlacitko."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Tisk prerusen"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Tiskovy vent.:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Tisk z SD"
 
@@ -1441,7 +1442,7 @@ msgid "Printer IP Addr:"
 msgstr "IP adr. tiskarny:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1464,7 +1465,7 @@ msgstr ""
 "Tisk zrusen."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1489,7 +1490,7 @@ msgid "Rename"
 msgstr "Prejmenovat"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1500,13 +1501,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Pokracovat"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Obnoveni tisku"
 
@@ -1535,20 +1536,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD karta"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "ZASTAVENO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Hledam kalibracni bod podlozky"
 
@@ -1565,18 +1566,18 @@ msgid ""
 msgstr "Zvolte filament pro kalibraci prvni vrstvy z nasledujiciho menu"
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Vyberte extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Zvolte filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Vyber jazyka"
@@ -1612,7 +1613,7 @@ msgid "Selftest error!"
 msgstr "Chyba Selftestu!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Selftest selhal"
@@ -1638,7 +1639,7 @@ msgid "Set temperature:"
 msgstr "Nastavte teplotu:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1652,7 +1653,7 @@ msgstr "Tezke zkos."
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Plat"
 
@@ -1675,7 +1676,7 @@ msgid "Show end stops"
 msgstr "Stav konc. spin."
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Tichy"
@@ -1700,19 +1701,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Vyskytl se problem, srovnavam osu Z ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Trideni"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Trideni souboru"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1724,7 +1725,7 @@ msgid "Speed"
 msgstr "Rychlost"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Toci se"
@@ -1740,25 +1741,25 @@ msgid "Statistics"
 msgstr "Statistika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Tichy"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Tiskove platy"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Zastavit tisk"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1775,7 +1776,7 @@ msgid "Swapped"
 msgstr "Prohozene"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1810,7 +1811,7 @@ msgstr ""
 "vysku. Postupujte podle obrazku v handbooku (kapitola Kalibrace)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1819,23 +1820,23 @@ msgstr ""
 "Zaciname, sekce Postup kalibrace."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Cas"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Celkem"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Celkem selhani"
@@ -1856,13 +1857,13 @@ msgid "Tune"
 msgstr "Ladit"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Vyjmout filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Vysouvam filament"
@@ -1906,7 +1907,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Cekani na zchladnuti trysky a podlozky."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1933,7 +1934,7 @@ msgid "Was filament unload successful?"
 msgstr "Bylo vysunuti filamentu uspesne?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2003,7 +2004,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Kalibrace XYZ selhala. Nahlednete do manualu."
@@ -2030,7 +2031,7 @@ msgid "Y-correct:"
 msgstr "Korekce Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2051,7 +2052,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Pruvodce muzete kdykoliv znovu spustit z menu Kalibrace -> Pruvodce"
 
@@ -2061,7 +2062,7 @@ msgid "Z-correct:"
 msgstr "Korekce Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Pocet mereni Z"
 
@@ -2091,12 +2092,12 @@ msgid "unknown"
 msgstr "neznamy"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "neznamy stav"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Obnovit"

lang/po/Firmware_da.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr ""
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ""
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr ""
@@ -122,27 +123,27 @@ msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr ""
@@ -157,7 +158,7 @@ msgstr ""
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -169,7 +170,7 @@ msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr ""
@@ -181,17 +182,17 @@ msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr ""
@@ -202,7 +203,7 @@ msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr ""
 
@@ -214,7 +215,7 @@ msgid ""
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr ""
@@ -232,7 +233,7 @@ msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr ""
 
@@ -252,7 +253,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr ""
@@ -268,13 +269,13 @@ msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr ""
@@ -285,7 +286,7 @@ msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr ""
 
@@ -305,7 +306,7 @@ msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr ""
@@ -321,17 +322,17 @@ msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr ""
 
@@ -341,13 +342,13 @@ msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -355,7 +356,7 @@ msgid "Crash det."
 msgstr ""
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr ""
 
@@ -368,13 +369,13 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr ""
@@ -390,7 +391,7 @@ msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -401,7 +402,7 @@ msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -421,7 +422,7 @@ msgid "E-correct:"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -431,7 +432,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr ""
@@ -457,13 +458,13 @@ msgid "Endstops"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr ""
@@ -474,14 +475,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr ""
@@ -512,33 +513,33 @@ msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -547,12 +548,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr ""
@@ -563,7 +564,7 @@ msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -580,13 +581,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr ""
@@ -607,7 +608,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr ""
@@ -635,13 +636,13 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -661,14 +662,14 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr ""
@@ -679,7 +680,7 @@ msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr ""
@@ -690,13 +691,13 @@ msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -704,7 +705,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -713,7 +714,7 @@ msgstr ""
 "dig gennem installationsprocessen?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -742,7 +743,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr ""
 
@@ -764,30 +765,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -799,7 +800,7 @@ msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr ""
@@ -810,12 +811,12 @@ msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr ""
 
@@ -825,7 +826,7 @@ msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr ""
@@ -836,7 +837,7 @@ msgid "Load all"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -853,7 +854,7 @@ msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -866,7 +867,7 @@ msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr ""
@@ -882,7 +883,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr ""
@@ -903,7 +904,7 @@ msgid "MMU OK. Resuming..."
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr ""
@@ -914,7 +915,7 @@ msgid "MMU load failed"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr ""
@@ -935,12 +936,12 @@ msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -956,23 +957,23 @@ msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -988,14 +989,14 @@ msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1021,7 +1022,7 @@ msgid "Move axis"
 msgstr ""
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1035,7 +1036,7 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1052,7 +1053,7 @@ msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1061,7 +1062,7 @@ msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1073,7 +1074,7 @@ msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr ""
@@ -1095,7 +1096,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1103,12 +1104,12 @@ msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr ""
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1126,7 +1127,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1138,12 +1139,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1169,7 +1170,7 @@ msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr ""
@@ -1180,7 +1181,7 @@ msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1188,25 +1189,25 @@ msgid ""
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1228,7 +1229,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
@@ -1256,19 +1257,19 @@ msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr ""
 
@@ -1284,7 +1285,7 @@ msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
@@ -1310,13 +1311,13 @@ msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr ""
@@ -1327,12 +1328,12 @@ msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr ""
@@ -1373,18 +1374,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr ""
 
@@ -1404,7 +1405,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1423,7 +1424,7 @@ msgid ""
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1448,7 +1449,7 @@ msgid "Rename"
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1459,13 +1460,13 @@ msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr ""
 
@@ -1492,20 +1493,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
@@ -1522,18 +1523,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr ""
@@ -1569,7 +1570,7 @@ msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr ""
@@ -1595,7 +1596,7 @@ msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1609,7 +1610,7 @@ msgstr ""
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr ""
 
@@ -1628,7 +1629,7 @@ msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr ""
@@ -1651,19 +1652,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr ""
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1675,7 +1676,7 @@ msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr ""
@@ -1691,25 +1692,25 @@ msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1726,7 +1727,7 @@ msgid "Swapped"
 msgstr ""
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1759,30 +1760,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr ""
@@ -1803,13 +1804,13 @@ msgid "Tune"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr ""
@@ -1849,7 +1850,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1876,7 +1877,7 @@ msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -1945,7 +1946,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
@@ -1971,7 +1972,7 @@ msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -1992,7 +1993,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
@@ -2002,7 +2003,7 @@ msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr ""
 
@@ -2032,12 +2033,12 @@ msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr ""
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_de.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 oder älter"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 oder neuer"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s Level erwartet"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Abbruch"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Alles richtig"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Alles abgeschlossen. Viel Spaß beim Drucken!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Sind linke+rechte Z- Schlitten ganz oben?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Assist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Startposition"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Auto Leist"
@@ -125,27 +126,27 @@ msgid "Axis length"
 msgstr "Achsenlänge"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Zurück"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Bett"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Bett aufwärmen"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Bett OK"
@@ -160,7 +161,7 @@ msgstr "Bett Level Korr."
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -173,7 +174,7 @@ msgid "Bed/Heater"
 msgstr "Bett/Heizung"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Gurtstatus"
@@ -185,17 +186,17 @@ msgstr "Riementest"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Stromausfall! Druck wiederherstellen?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Hell"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Helligkeit"
@@ -206,7 +207,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibrierung XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibrierung Z"
 
@@ -220,7 +221,7 @@ msgstr ""
 "Anschliessend den Knopf drücken."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibriere Z"
@@ -240,7 +241,7 @@ msgid "Calibrating home"
 msgstr "Kalibriere Start"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibrierung"
 
@@ -260,7 +261,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Filament-Wechsel"
@@ -276,13 +277,13 @@ msgid "Changed correctly?"
 msgstr "Wechsel ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Prüfe X Achse"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Prüfe Y Achse"
@@ -293,7 +294,7 @@ msgid "Checking Z axis"
 msgstr "Prüfe Z Achse"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Prüfe Bett"
 
@@ -313,7 +314,7 @@ msgid "Checking hotend"
 msgstr "Prüfe Düse"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Prüfe Sensoren"
@@ -329,17 +330,17 @@ msgid "Color not correct"
 msgstr "Falsche Farbe"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Von der Community"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Abkühlen"
 
@@ -349,13 +350,13 @@ msgid "Copy selected language?"
 msgstr "Gewählte Sprache kopieren?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -363,7 +364,7 @@ msgid "Crash det."
 msgstr "Crash Erk."
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Crash erkannt."
 
@@ -379,13 +380,13 @@ msgstr ""
 "genutzt werden"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Fil. schneiden"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Messer"
@@ -401,7 +402,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Dimm"
 
@@ -412,7 +413,7 @@ msgstr "Motoren aus"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -437,7 +438,7 @@ msgid "E-correct:"
 msgstr "E-Korrektur:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "FEHLER:"
 
@@ -447,7 +448,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "FEHLER: Filament- sensor reagiert nicht, bitte Verbindung prüfen."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Filamentauswurf"
@@ -473,13 +474,13 @@ msgid "Endstops"
 msgstr "Endschalter"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Extruderlüfter:"
@@ -490,14 +491,14 @@ msgid "Extruder info"
 msgstr "Extruder Info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autoladen"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS Aktion"
@@ -528,33 +529,33 @@ msgid "False triggering"
 msgstr "Falschtriggerung"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Lüfter-Tempo"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Lüftertest"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Lüfter Check"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fil. Mängel"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -563,12 +564,12 @@ msgstr "Fil. Sensor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament extrudiert mit richtiger Farbe?"
@@ -579,7 +580,7 @@ msgid "Filament not loaded"
 msgstr "Fil. nicht geladen"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -596,13 +597,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Datei unvollständig Trotzdem fortfahren?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Bewegung beenden"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Erste-Schicht Kal."
@@ -625,7 +626,7 @@ msgid "Flow"
 msgstr "Durchfluss"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Drucklüfter?"
@@ -655,13 +656,13 @@ msgstr ""
 "erneut. Druck abgebrochen."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-Code ist für einen anderen Drucker geslict. Fortfahren?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -685,14 +686,14 @@ msgstr ""
 "Druck abgebrochen."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW Einstellungen"
@@ -703,7 +704,7 @@ msgid "Heater/Thermistor"
 msgstr "Heizung/Thermistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Aufwärmen"
@@ -714,13 +715,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Heizung durch Sicherheitstimer deaktiviert."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Aufwärmen OK."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -731,7 +732,7 @@ msgstr ""
 "Danach sind Sie bereit für den Druck."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -740,7 +741,7 @@ msgstr ""
 "durch den Einricht- ungsablauf führe?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -773,7 +774,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Infoanzeige"
 
@@ -797,30 +798,30 @@ msgstr ""
 "den Knopf."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Ist das Filament geladen?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Liegt das Stahlblech auf dem Heizbett?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Wiederholung"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Letzter Druck"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -832,7 +833,7 @@ msgid "Left"
 msgstr "Links"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Extruderlüfter?"
@@ -843,12 +844,12 @@ msgid "Left side [μm]"
 msgstr "Links [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Hell.wert"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Dimmwert"
 
@@ -858,7 +859,7 @@ msgid "Lin. correction"
 msgstr "Lineare Korrektur"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Z einstellen"
@@ -869,7 +870,7 @@ msgid "Load all"
 msgstr "Alle laden"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -886,7 +887,7 @@ msgid "Loading color"
 msgstr "Lade Farbe"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -899,7 +900,7 @@ msgid "Loose pulley"
 msgstr "Lose Riemenscheibe"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Laut"
@@ -915,7 +916,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S-Firmware auf MK3-Drucker erkannt"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU Mod."
@@ -936,7 +937,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Weiterdrucken..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "MMU Fehler"
@@ -947,7 +948,7 @@ msgid "MMU load failed"
 msgstr "MMU Ladefehler"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU Ladefehler"
@@ -968,12 +969,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 verbunden"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Magnet Komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -989,23 +990,23 @@ msgstr "Schräglauf"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Messen der Referenzhöhe des Kalibrierpunktes"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Gitter"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "MeshBett Ausgleich"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1021,14 +1022,14 @@ msgid "Mode change in progress..."
 msgstr "Moduswechsel erfolgt..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1054,7 +1055,7 @@ msgid "Move axis"
 msgstr "Achse bewegen"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1068,7 +1069,7 @@ msgid "New firmware version available:"
 msgstr "Neue Firmware- Version verfügbar:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1085,7 +1086,7 @@ msgid "No move."
 msgstr "Keine Bewegung."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1094,7 +1095,7 @@ msgid "None"
 msgstr "Ohne"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1106,7 +1107,7 @@ msgid "Not connected"
 msgstr "Nicht angeschlossen"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Dreht sich nicht"
@@ -1129,7 +1130,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Testdruck jetzt von Stahlblech entfernen."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1137,12 +1138,12 @@ msgid "Nozzle"
 msgstr "Düse"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Düsen Dia."
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1161,7 +1162,7 @@ msgstr ""
 "Alte Einstellungen gefunden. Standard PID, E-Steps u.s.w. werden gesetzt."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1173,12 +1174,12 @@ msgid "On"
 msgstr "An"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Einmal"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1204,7 +1205,7 @@ msgstr "PINDA erwärmen"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA Kal."
@@ -1215,7 +1216,7 @@ msgid "PINDA calibration failed"
 msgstr "PINDA-Kalibrierung fehlgeschlagen"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1225,18 +1226,18 @@ msgstr ""
 "Einstellungen -> PINDA kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Druck pausieren"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1246,7 +1247,7 @@ msgstr ""
 "ausschalten."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1270,7 +1271,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Bitte reinigen Sie das Heizbett und drücken Sie dann den Knopf."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Bitte entfernen Sie überstehendes Filament von der Düse. Klicken wenn sauber."
@@ -1303,19 +1304,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Bitte Spannrolle öffnen und Filament von Hand entfernen"
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Bitte legen Sie das Stahlblech auf das Heizbett."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Bitte drücken Sie den Knopf um das Filament zu entladen."
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Bitte ziehen Sie das Filament sofort heraus"
 
@@ -1331,7 +1332,7 @@ msgstr "Bitte zuerst Transportsicherungen entfernen."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Bitte entfernen Sie das Stahlblech vom Heizbett."
 
@@ -1357,13 +1358,13 @@ msgstr "Bitte aktualisieren."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Bitte warten"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Netzfehler"
@@ -1374,12 +1375,12 @@ msgid "Preheat"
 msgstr "Vorheizen"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Düse vorheizen!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Vorheizen der Düse. Bitte warten."
@@ -1420,18 +1421,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Drücken Sie den Knopf um die Düsentemperatur wiederherzustellen"
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Druck abgebrochen"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Drucklüfter:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Drucken von SD"
 
@@ -1451,7 +1452,7 @@ msgid "Printer IP Addr:"
 msgstr "Drucker IP Adr.:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1474,7 +1475,7 @@ msgstr ""
 "den Wert in den Einstellungen. Druck abgebrochen."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1501,7 +1502,7 @@ msgid "Rename"
 msgstr "Umbenennen"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1512,13 +1513,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset XYZ Kalibr."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Druck fortsetzen"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Druck fortgesetzt"
 
@@ -1547,20 +1548,20 @@ msgid "Runouts"
 msgstr "Mängel"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD Karte"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "GESTOPPT."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Suche Bett Kalibrierpunkt"
 
@@ -1579,18 +1580,18 @@ msgstr ""
 "im On-Screen-Menu aus."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Wähle extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Wähle filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Wähle Sprache"
@@ -1626,7 +1627,7 @@ msgid "Selftest error!"
 msgstr "Selbsttest Fehler!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Selbsttest Error"
@@ -1652,7 +1653,7 @@ msgid "Set temperature:"
 msgstr "Temp. einstellen:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1666,7 +1667,7 @@ msgstr "Sehr schräg"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Stahlblech"
 
@@ -1689,7 +1690,7 @@ msgid "Show end stops"
 msgstr "Endschalter Status"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Leise"
@@ -1713,19 +1714,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Fehler aufgetreten, Z-Kalibrierung erforderlich..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Sort."
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Sortiere Dateien"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1737,7 +1738,7 @@ msgid "Speed"
 msgstr "Geschwindigkeit"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Dreht sich"
@@ -1754,25 +1755,25 @@ msgid "Statistics"
 msgstr "Statistiken"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Leise"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Stahlbleche"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Druck abbrechen"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1789,7 +1790,7 @@ msgid "Swapped"
 msgstr "Ausgetauscht"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1825,7 +1826,7 @@ msgstr ""
 "im Handbuch (Kapitel Kalibrierung)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1834,23 +1835,23 @@ msgstr ""
 "Sie das Handbuch, Kapitel Erste Schritte, Abschnitt Kalibrierablauf."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Zeit"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Gesamt"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Gesamte Fehler"
@@ -1871,13 +1872,13 @@ msgid "Tune"
 msgstr "Feineinstellung"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Fil. entladen"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Filament auswerfen"
@@ -1923,7 +1924,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Warten bis Heizung und Bett abgekühlt sind"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1950,7 +1951,7 @@ msgid "Was filament unload successful?"
 msgstr "Konnten Sie das Filament entnehmen?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2024,7 +2025,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ-Kalibrierung fehlgeschlagen. Bitte schauen Sie in das Handbuch."
@@ -2052,7 +2053,7 @@ msgid "Y-correct:"
 msgstr "Y-Korrektur:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2073,7 +2074,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Sie können den Assistenten immer im Menu neu starten: Kalibrierung -> "
@@ -2085,7 +2086,7 @@ msgid "Z-correct:"
 msgstr "Z-Korrektur:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z-Test Nr."
 
@@ -2115,12 +2116,12 @@ msgid "unknown"
 msgstr "unbekannt"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "Status unbekannt"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Aktualisiere"

lang/po/Firmware_es.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 o mayor"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 o mas nueva"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s nivel esperado"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Cancelar"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Todo bien"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Terminado! Feliz impresion!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfabet"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Carros Z izq./der. estan arriba maximo?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Llevar al origen"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Encendido"
@@ -124,27 +125,27 @@ msgid "Axis length"
 msgstr "Longitud del eje"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "atras"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Base"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Calentando Base"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Base preparada"
@@ -159,7 +160,7 @@ msgstr "Corr. de la cama"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -172,7 +173,7 @@ msgid "Bed/Heater"
 msgstr "Base/Calentador"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Estado de correa"
@@ -184,17 +185,17 @@ msgstr "Test cinturon"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Se fue la luz. Re- anudar la impresion?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Brill."
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Brillo"
@@ -205,7 +206,7 @@ msgid "Calibrate XYZ"
 msgstr "Calibrar XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Calibrar Z"
 
@@ -219,7 +220,7 @@ msgstr ""
 "superiores. Despues haz clic."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Calibrando Z"
@@ -239,7 +240,7 @@ msgid "Calibrating home"
 msgstr "Calibrar pos.inicial"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Calibracion"
 
@@ -259,7 +260,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Cambiar filamento"
@@ -275,13 +276,13 @@ msgid "Changed correctly?"
 msgstr "Cambio correcto?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Control sensor X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Control sensor Y"
@@ -292,7 +293,7 @@ msgid "Checking Z axis"
 msgstr "Control sensor Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Control base cal."
 
@@ -312,7 +313,7 @@ msgid "Checking hotend"
 msgstr "Control fusor"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Comprobando sensores"
@@ -328,17 +329,17 @@ msgid "Color not correct"
 msgstr "Color no homogeneo"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Desde la comunidad"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Enfriar"
 
@@ -348,13 +349,13 @@ msgid "Copy selected language?"
 msgstr "Copiar idioma seleccionado?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Choque"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -362,7 +363,7 @@ msgid "Crash det."
 msgstr "Det. choque"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Choque detectado."
 
@@ -378,13 +379,13 @@ msgstr ""
 "Modo normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Cortar filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Cuchillo"
@@ -400,7 +401,7 @@ msgid "Date:"
 msgstr "Fecha:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Oscuro"
 
@@ -411,7 +412,7 @@ msgstr "Apagar motores"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -435,7 +436,7 @@ msgid "E-correct:"
 msgstr "Corregir-E:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -446,7 +447,7 @@ msgstr ""
 "ERROR:Sensor de fi- lamento no responde Por favor, comprue- ba la conexion."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Expulsar fil."
@@ -472,13 +473,13 @@ msgid "Endstops"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr "Extruir"
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Vent.extrusor:"
@@ -489,14 +490,14 @@ msgid "Extruder info"
 msgstr "Info. del extrusor"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "Autocarg.fil."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS accion"
@@ -527,33 +528,33 @@ msgid "False triggering"
 msgstr "Falsa activacion"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Velocidad Vent"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test ventiladores"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Comprob.vent"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fil. acabado"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -562,12 +563,12 @@ msgstr "Sensor Fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr "Filamento"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Es nitido el color nuevo?"
@@ -578,7 +579,7 @@ msgid "Filament not loaded"
 msgstr "Fil. no introducido"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -595,13 +596,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Archivo incompleto. Continuar de todos modos?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Term. movimientos"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Cal. primera cap."
@@ -624,7 +625,7 @@ msgid "Flow"
 msgstr "Flujo"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Vent. frontal?"
@@ -654,13 +655,13 @@ msgstr ""
 "nuevo. Impresion cancelada."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "Codigo G laminado para un tipo de impresora diferente. Continuar?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -684,14 +685,14 @@ msgstr ""
 "Impresion cancelada."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "Configuracion HW"
@@ -702,7 +703,7 @@ msgid "Heater/Thermistor"
 msgstr "Calentador/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Calentando..."
@@ -713,13 +714,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Calentadores desactivados por el temporizador de seguridad."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Calentando acabado."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -730,7 +731,7 @@ msgstr ""
 "listo para imprimir."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -739,7 +740,7 @@ msgstr ""
 "configuracion?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -770,7 +771,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Monitorizar"
 
@@ -793,30 +794,30 @@ msgstr ""
 "Inserte el filamento (no lo cargue) en el extrusor y luego presione el dial."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Esta el filamento cargado?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Esta coloc.la lamina sobre la base?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iteracion"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Ultima impresion"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -828,7 +829,7 @@ msgid "Left"
 msgstr "Izquierda"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Vent. izquierdo?"
@@ -839,12 +840,12 @@ msgid "Left side [μm]"
 msgstr "Izquierda [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Valor brill."
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Valor oscuro"
 
@@ -854,7 +855,7 @@ msgid "Lin. correction"
 msgstr "Correc. Linealidad"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Micropaso Eje Z"
@@ -865,7 +866,7 @@ msgid "Load all"
 msgstr "Intr. todos fil."
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -882,7 +883,7 @@ msgid "Loading color"
 msgstr "Cambiando color"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -895,7 +896,7 @@ msgid "Loose pulley"
 msgstr "Polea suelta"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Alto"
@@ -911,7 +912,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S detectado en impresora MK3"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "Modo MMU"
@@ -932,7 +933,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Resumiendo..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Fallos MMU"
@@ -943,7 +944,7 @@ msgid "MMU load failed"
 msgstr "Carga MMU fallida"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "Carga MMU falla"
@@ -964,12 +965,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 conectado"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Comp. imanes"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -985,23 +986,23 @@ msgstr "No a escuadra"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Midiendo altura del punto de calibracion"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Malla"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Nivela. Mesh Level"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1017,14 +1018,14 @@ msgid "Mode change in progress..."
 msgstr "Cambio de modo progresando ..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modelo"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1050,7 +1051,7 @@ msgid "Move axis"
 msgstr "Mover ejes"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1064,7 +1065,7 @@ msgid "New firmware version available:"
 msgstr "Nuevo firmware disponible:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1081,7 +1082,7 @@ msgid "No move."
 msgstr "Sin movimiento"
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1090,7 +1091,7 @@ msgid "None"
 msgstr "Ninguno"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1102,7 +1103,7 @@ msgid "Not connected"
 msgstr "No hay conexion"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Ventilador no gira"
@@ -1126,7 +1127,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Ahora retira la prueba de la lamina de acero."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1134,12 +1135,12 @@ msgid "Nozzle"
 msgstr "Boquilla"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "D-boquilla"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1159,7 +1160,7 @@ msgstr ""
 "extrusor, etc"
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1171,12 +1172,12 @@ msgid "On"
 msgstr "Act"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Una vez"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1202,7 +1203,7 @@ msgstr "Calentando PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "Cal. PINDA"
@@ -1213,7 +1214,7 @@ msgid "PINDA calibration failed"
 msgstr "Fallo de la calibracion de PINDA"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1223,18 +1224,18 @@ msgstr ""
 "menu Configuracion->Cal. PINDA"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pausa"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pausar impresion"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1244,7 +1245,7 @@ msgstr ""
 "impresora inmediatamente."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1269,7 +1270,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Limpia la superficie de la base, por favor, y luego presione el dial."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Limpia boquilla para calibracion. Click cuando acabes."
 
@@ -1303,19 +1304,19 @@ msgstr ""
 "manualmente."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Por favor coloca la chapa de acero en la base calefactable."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Por favor, pulsa el dial para descargar el filamento"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Por favor retire el filamento de inmediato"
 
@@ -1331,7 +1332,7 @@ msgstr "Por favor retira los soportes de envio primero."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Por favor retire la chapa de acero de la base calefactable."
 
@@ -1357,13 +1358,13 @@ msgstr "Actualize por favor"
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Por Favor Espere"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Fallas energia"
@@ -1374,12 +1375,12 @@ msgid "Preheat"
 msgstr "Precalentar"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Precalienta extrusor"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Precalentando nozzle. Espera por favor."
@@ -1420,18 +1421,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Presione el dial para continuar con la temperatura de la boquilla."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Impresion cancelada"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Vent.fusor:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Menu tarjeta SD"
 
@@ -1451,7 +1452,7 @@ msgid "Printer IP Addr:"
 msgstr "Dir. IP impresora:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1474,7 +1475,7 @@ msgstr ""
 "ajustes. Impresion cancelada."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr "Puerto RPi"
 
@@ -1501,7 +1502,7 @@ msgid "Rename"
 msgstr "Renombrar"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1512,13 +1513,13 @@ msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Reanudar impres."
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Continuan. impresion"
 
@@ -1547,20 +1548,20 @@ msgid "Runouts"
 msgstr "Falla"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "Tarj. SD"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "PARADA"
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Buscando punto de calibracion base"
 
@@ -1579,18 +1580,18 @@ msgstr ""
 "el menu en pantalla."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Elegir extrusor:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Selecciona filam.:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Cambiar el idioma"
@@ -1628,7 +1629,7 @@ msgid "Selftest error!"
 msgstr "Error Selftest!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Fallo Selftest"
@@ -1656,7 +1657,7 @@ msgid "Set temperature:"
 msgstr "Establecer temp.:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1670,7 +1671,7 @@ msgstr "Severo sesgar"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Lamina"
 
@@ -1693,7 +1694,7 @@ msgid "Show end stops"
 msgstr "Mostrar endstops"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Acallar"
@@ -1718,19 +1719,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Problema encontrado, nivelacion Z forzosa ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Ordenar"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Ordenando archivos"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1742,7 +1743,7 @@ msgid "Speed"
 msgstr "Velocidad"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Ventilador girando"
@@ -1759,25 +1760,25 @@ msgid "Statistics"
 msgstr "Estadisticas"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Sigilo"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Lamina de acero"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Detener impresion"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1794,7 +1795,7 @@ msgid "Swapped"
 msgstr "Intercambiado"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1830,7 +1831,7 @@ msgstr ""
 "de calibracion)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1839,23 +1840,23 @@ msgstr ""
 "capitulo Primeros pasos, seccion Calibracion del flujo."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Fecha"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Expirar"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Fallos totales"
@@ -1876,13 +1877,13 @@ msgid "Tune"
 msgstr "Ajustar"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Soltar filamento"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Soltando filamento"
@@ -1926,7 +1927,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Esperando enfriamiento de la base y extrusor."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1954,7 +1955,7 @@ msgid "Was filament unload successful?"
 msgstr "Se descargo con exito el filamento?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2026,7 +2027,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Calibracion XYZ fallada. Consulta el manual por favor."
@@ -2052,7 +2053,7 @@ msgid "Y-correct:"
 msgstr "Corregir-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2073,7 +2074,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Siempre puedes acceder al asistente desde Calibracion -> Wizard"
 
@@ -2083,7 +2084,7 @@ msgid "Z-correct:"
 msgstr "Corregir-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z-sensor nr."
 
@@ -2113,12 +2114,12 @@ msgid "unknown"
 msgstr "desconocido"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "estado desconocido"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Actualizar"

lang/po/Firmware_fr.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 ou +ancien"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 ou +recent"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "niveau %s attendu"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Annuler"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Tout est correct"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Tout est pret. Bonne impression!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Z~carriages gauche + droite tout en haut?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Mise a 0 des axes"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Puiss.auto"
@@ -124,27 +125,27 @@ msgid "Axis length"
 msgstr "Longueur de l'axe"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Retour"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Lit"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Chauffe du lit"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Plateau termine"
@@ -159,7 +160,7 @@ msgstr "Reglage plateau"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -173,7 +174,7 @@ msgid "Bed/Heater"
 msgstr "Lit/Chauffage"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Statut courroie"
@@ -185,17 +186,17 @@ msgstr "Test de courroie"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Coupure detectee. Reprendre impres.?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Brill."
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Luminosite"
@@ -206,7 +207,7 @@ msgid "Calibrate XYZ"
 msgstr "Calibrer XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Calibrer Z"
 
@@ -220,7 +221,7 @@ msgstr ""
 "l'axe Z jusqu'aux butees. Cliquez une fois fait."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Calibration Z"
@@ -240,7 +241,7 @@ msgid "Calibrating home"
 msgstr "Calib. mise a 0"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr ""
 
@@ -260,7 +261,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Changer filament"
@@ -276,13 +277,13 @@ msgid "Changed correctly?"
 msgstr "Change correctement?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Verification axe X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Verification axe Y"
@@ -293,7 +294,7 @@ msgid "Checking Z axis"
 msgstr "Verification axe Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Verif. plateau chauf"
 
@@ -313,7 +314,7 @@ msgid "Checking hotend"
 msgstr "Verif. du hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Verif. des capteurs"
@@ -329,17 +330,17 @@ msgid "Color not correct"
 msgstr "Couleur incorrecte"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Fait de community"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Refroidissement"
 
@@ -349,13 +350,13 @@ msgid "Copy selected language?"
 msgstr "Copier la langue choisie?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -363,7 +364,7 @@ msgid "Crash det."
 msgstr "Detect.crash"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Crash detecte."
 
@@ -380,13 +381,13 @@ msgstr ""
 "mode Normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Coupe filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Coupeur"
@@ -402,7 +403,7 @@ msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Sombre"
 
@@ -413,7 +414,7 @@ msgstr "Desactiver moteurs"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -438,7 +439,7 @@ msgid "E-correct:"
 msgstr "Correct-E:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "ERREUR:"
 
@@ -448,7 +449,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "ERREUR: Le capteur de filament ne repond pas, verifiez le branchement."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Remonter le fil."
@@ -474,13 +475,13 @@ msgid "Endstops"
 msgstr "Butees"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr "Extrudeur"
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Vent. extrudeur:"
@@ -491,14 +492,14 @@ msgid "Extruder info"
 msgstr "Infos extrudeur"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autocharg."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr ""
@@ -529,33 +530,33 @@ msgid "False triggering"
 msgstr "Faux declenchement"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Vitesse vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test du ventilateur"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Verif vent."
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fins filament"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -564,12 +565,12 @@ msgstr "Capteur Fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament extrude et avec bonne couleur?"
@@ -580,7 +581,7 @@ msgid "Filament not loaded"
 msgstr "Filament non charge"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -597,13 +598,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Fichier incomplet. Continuer qd meme?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Mouvement final"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Cal. 1ere couche"
@@ -626,7 +627,7 @@ msgid "Flow"
 msgstr "Flux"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Ventilo impr avant?"
@@ -656,14 +657,14 @@ msgstr ""
 "modele a nouveau. L'impression a ete annulee."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr ""
 "Le G-code a ete prepare pour une autre version de l'imprimante. Continuer?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -688,14 +689,14 @@ msgstr ""
 "mettre a jour le firmware. L'impression annulee."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "Config HW"
@@ -706,7 +707,7 @@ msgid "Heater/Thermistor"
 msgstr "Chauffage/Thermistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Chauffe"
@@ -717,13 +718,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Chauffage desactivee par le compteur de securite."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Chauffe terminee."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -734,7 +735,7 @@ msgstr ""
 "calibrer le Z-axis. Apres cela, tout sera pret pour imprimer."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -743,7 +744,7 @@ msgstr ""
 "guide a travers le processus d'installation?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -775,7 +776,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Ecran d'info"
 
@@ -799,30 +800,30 @@ msgstr ""
 "appuyez sur le bouton."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Fil. est-il charge?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Est la plaque sur le plat. chauffant?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Derniere impres."
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -834,7 +835,7 @@ msgid "Left"
 msgstr "Gauche"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Ventilo gauche?"
@@ -845,12 +846,12 @@ msgid "Left side [μm]"
 msgstr "Gauche [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Niveau brill"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Niv. sombre"
 
@@ -860,7 +861,7 @@ msgid "Lin. correction"
 msgstr "Correction lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Ajuster Z en dir."
@@ -871,7 +872,7 @@ msgid "Load all"
 msgstr "Charger un par un"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -888,7 +889,7 @@ msgid "Loading color"
 msgstr "Charg. de la couleur"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -901,7 +902,7 @@ msgid "Loose pulley"
 msgstr "Poulie lache"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Fort"
@@ -917,7 +918,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S detecte sur imprimante MK3"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "Mode MMU"
@@ -938,7 +939,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Reprise ..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Echecs MMU"
@@ -949,7 +950,7 @@ msgid "MMU load failed"
 msgstr "Def. charg. MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "Def. charg. MMU"
@@ -970,12 +971,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 connecte"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Compens. aim."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -991,23 +992,23 @@ msgstr "Var. mesuree"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Je mesure la hauteur de reference du point de calibrage"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1023,14 +1024,14 @@ msgid "Mode change in progress..."
 msgstr "Changement de mode en cours..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modele"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr "Moteur"
@@ -1056,7 +1057,7 @@ msgid "Move axis"
 msgstr "Deplacer l'axe"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1070,7 +1071,7 @@ msgid "New firmware version available:"
 msgstr "Nouvelle version de firmware disponible:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1087,7 +1088,7 @@ msgid "No move."
 msgstr "Pas de mouvement."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1096,7 +1097,7 @@ msgid "None"
 msgstr "Aucun"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1108,7 +1109,7 @@ msgid "Not connected"
 msgstr "Non connecte"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Ne tourne pas"
@@ -1132,7 +1133,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Retirez maintenant l'impression de test de la plaque en acier."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1140,12 +1141,12 @@ msgid "Nozzle"
 msgstr "Buse"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Diam. buse"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1164,7 +1165,7 @@ msgstr ""
 "Anciens reglages trouves. Le PID, les Esteps etc. par defaut seront regles"
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1176,12 +1177,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "1 fois"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1207,7 +1208,7 @@ msgstr "Chauffe de la PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "Calib. PINDA"
@@ -1218,7 +1219,7 @@ msgid "PINDA calibration failed"
 msgstr "Echec de la calibration en PINDA"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1228,18 +1229,18 @@ msgstr ""
 "dans le menu Reglages-> Calib. PINDA"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pause de l'impr."
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1248,7 +1249,7 @@ msgstr ""
 "premiers points. Si la buse accroche le papier, eteignez vite l'imprimante."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1272,7 +1273,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Nettoyez plateau chauffant en acier et appuyez sur le bouton."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Nettoyez la buse pour la calibration. Cliquez une fois fait."
 
@@ -1304,19 +1305,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Ouvrez l'idler et retirez le filament manuellement."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Placez la plaque en acier sur le plateau chauffant."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Appuyez sur le bouton pour decharger le filament"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Retirez immediatement le filament"
 
@@ -1332,7 +1333,7 @@ msgstr "Retirez d'abord les protections de transport."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Retirez la plaque en acier du plateau chauffant."
 
@@ -1359,13 +1360,13 @@ msgstr "Mettez a jour le FW."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Merci de patienter"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Coup.de courant"
@@ -1376,12 +1377,12 @@ msgid "Preheat"
 msgstr "Prechauffage"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Prechauffez la buse!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Prechauffage de la buse. Merci de patienter."
@@ -1422,18 +1423,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Appuyez sur le bouton pour rechauffer la buse."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Impression annulee"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Vent. impr:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Impr. depuis la SD"
 
@@ -1453,7 +1454,7 @@ msgid "Printer IP Addr:"
 msgstr "Adr.IP imprimante:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1478,7 +1479,7 @@ msgstr ""
 "Code. Merci de verifier le parametre dans les reglages. Impression annulee."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr "Port RPi"
 
@@ -1504,7 +1505,7 @@ msgid "Rename"
 msgstr "Renommer"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Reinitialiser"
@@ -1515,13 +1516,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reinit. calib. XYZ"
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Reprise impression"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Reprise de l'impr."
 
@@ -1550,20 +1551,20 @@ msgid "Runouts"
 msgstr "Fins"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "Carte SD"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "ARRETE."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Recherche point calibration du plateau"
 
@@ -1582,18 +1583,18 @@ msgstr ""
 "selectionnez-le depuis le menu a l'ecran."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Choisir extrudeur:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Choix du filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Choisir langue"
@@ -1631,7 +1632,7 @@ msgid "Selftest error!"
 msgstr "Erreur auto-test!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Echec de l'auto-test"
@@ -1658,7 +1659,7 @@ msgid "Set temperature:"
 msgstr "Regler temp.:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1672,7 +1673,7 @@ msgstr "Deviat.sev."
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Plaque"
 
@@ -1695,7 +1696,7 @@ msgid "Show end stops"
 msgstr "Afficher butees"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Furtif"
@@ -1719,19 +1720,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Probleme rencontre, cliquez sur le bouton pour niveller l'axe Z..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Tri"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Tri des fichiers"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1743,7 +1744,7 @@ msgid "Speed"
 msgstr "Vitesse"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Tourne"
@@ -1760,25 +1761,25 @@ msgid "Statistics"
 msgstr "Statistiques"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Furtif"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Plaques en acier"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Arreter impression"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1795,7 +1796,7 @@ msgid "Swapped"
 msgstr "Echange"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1831,7 +1832,7 @@ msgstr ""
 "(chapitre Calibration)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1840,23 +1841,23 @@ msgstr ""
 "chapitre Premiers pas, section Processus de calibration."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Heure"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Totale"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Total des echecs"
@@ -1877,13 +1878,13 @@ msgid "Tune"
 msgstr "Regler"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Decharger fil."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Dechargement fil."
@@ -1927,7 +1928,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Attente du refroidissement des buse et plateau chauffant"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1954,7 +1955,7 @@ msgid "Was filament unload successful?"
 msgstr "Dechargement du filament reussi?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2032,7 +2033,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Echec calibration XYZ. Consultez le manuel."
@@ -2060,7 +2061,7 @@ msgid "Y-correct:"
 msgstr "Correct-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2081,7 +2082,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Vous pouvez toujours relancer l'Assistant dans Calibration > Assistant."
@@ -2092,7 +2093,7 @@ msgid "Z-correct:"
 msgstr "Correct-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Mesurer x-fois"
 
@@ -2122,12 +2123,12 @@ msgid "unknown"
 msgstr "inconnu"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "Etat inconnu"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Rafraichir"

lang/po/Firmware_hr.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 ili stariji"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 ili noviji"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s level ocekivan"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Otkazati"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Sve je u redu"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Sve je gotovo. Sretno printanje!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Abeceda"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Jesu lijevi i desni Z~nosaci podignuti?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Pomoc"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Pocetna tocka"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Auto napaj"
@@ -124,27 +125,27 @@ msgid "Axis length"
 msgstr "Duljina osi"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Vrati"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Podloga"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Podloga se zagrijava"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Podloga zagrijana"
@@ -159,7 +160,7 @@ msgstr "Podloga ispravna"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -173,7 +174,7 @@ msgid "Bed/Heater"
 msgstr "Grijac/Podloga"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Status remena"
@@ -185,17 +186,17 @@ msgstr "Testiranje remena"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Doslo je do gasenja. Oporaviti print?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Svijet"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Svjetlina"
@@ -206,7 +207,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibrirajte XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibrirajte Z"
 
@@ -220,7 +221,7 @@ msgstr ""
 "Kliknite kada je zavrseno."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibriracija Z"
@@ -240,7 +241,7 @@ msgid "Calibrating home"
 msgstr "Kalibracija nultocke"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibriranje"
 
@@ -260,7 +261,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Promijeni filament"
@@ -276,13 +277,13 @@ msgid "Changed correctly?"
 msgstr "Ispravno izmjenjeno?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Provjera X osi"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Provjera Y osi"
@@ -293,7 +294,7 @@ msgid "Checking Z axis"
 msgstr "Provjera Z osi"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Provjera podloge"
 
@@ -313,7 +314,7 @@ msgid "Checking hotend"
 msgstr "Provjera hotenda"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Provjera senzora"
@@ -329,17 +330,17 @@ msgid "Color not correct"
 msgstr "Boja nije ispravna"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Napravilo zajedno"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Nast."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Ohladi"
 
@@ -349,13 +350,13 @@ msgid "Copy selected language?"
 msgstr "Kopirati odabrani jezik?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Udar"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -363,7 +364,7 @@ msgid "Crash det."
 msgstr "Udar detekti."
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Udar otkriven."
 
@@ -376,13 +377,13 @@ msgid ""
 msgstr "Detekcija udarca moze biti ukljuceno samo u Normalnom nacinu rada"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Odrezite fil."
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Rezac"
@@ -398,7 +399,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Tamno"
 
@@ -409,7 +410,7 @@ msgstr "Onemoguci stepere"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -434,7 +435,7 @@ msgid "E-correct:"
 msgstr "E-ispravan:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "POGRESKA:"
 
@@ -444,7 +445,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "POGRESKA: Senzor filamenta ne reagira, provjerite vezu."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Izbaci filament"
@@ -470,13 +471,13 @@ msgid "Endstops"
 msgstr "Granicnici"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr "Ekstruder"
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Ekstruder vent:"
@@ -487,14 +488,14 @@ msgid "Extruder info"
 msgstr "Info o ekstruderu"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. auto.punj"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS Akcija"
@@ -525,33 +526,33 @@ msgid "False triggering"
 msgstr "Lazno aktiviranje"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Brzina vent"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test ventilatora"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Provjera vent"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Bez filmaneta"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -560,12 +561,12 @@ msgstr "Fil. senzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Ekstrudiranje fil.s sa ispravnom bojom?"
@@ -576,7 +577,7 @@ msgid "Filament not loaded"
 msgstr "Fil. nije napunjen"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -593,13 +594,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Datoteka je nepotpuna. Svejedno nastaviti?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Zavrsni pokreti"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Prvi sloj kalib."
@@ -622,7 +623,7 @@ msgid "Flow"
 msgstr "Protok"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Prednji print vent?"
@@ -652,13 +653,13 @@ msgstr ""
 "otkazan."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-kod izrezan za drugu vrstu printera. Nastavite?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -682,14 +683,14 @@ msgstr ""
 "otkazan."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW podesavanje"
@@ -700,7 +701,7 @@ msgid "Heater/Thermistor"
 msgstr "Grijac/Termostat"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Grijanje"
@@ -711,13 +712,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Grijanje je onemoguceno sigurnosnim mjeracem vremena."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Grijanje obavljeno."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -728,7 +729,7 @@ msgstr ""
 "printanje."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -737,7 +738,7 @@ msgstr ""
 "postupak postavljanja?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -768,7 +769,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Info zaslon"
 
@@ -791,30 +792,30 @@ msgstr ""
 "Umetnite filament (nemojte ga puniti) u ekstruder i zatim pritisnite gumb."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Je li filament napunjen?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Je li celicna ploca na grijanoj podlozi?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Ponavljanje"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Zadnji print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -826,7 +827,7 @@ msgid "Left"
 msgstr "Lijevo"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Lijevi hotend vent?"
@@ -837,12 +838,12 @@ msgid "Left side [μm]"
 msgstr "Lijeva str[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Razina svjet"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Razina zatam"
 
@@ -852,7 +853,7 @@ msgid "Lin. correction"
 msgstr "Lin. ispravak"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Live podesavanje Z"
@@ -863,7 +864,7 @@ msgid "Load all"
 msgstr "Napuni sve"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -880,7 +881,7 @@ msgid "Loading color"
 msgstr "Ucitavanje boje"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -893,7 +894,7 @@ msgid "Loose pulley"
 msgstr "Labava remenica"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Glasno"
@@ -909,7 +910,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmware detektiran na MK3 printeru"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU Mod"
@@ -930,7 +931,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Nastavak..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "MMU ne uspijeva"
@@ -941,7 +942,7 @@ msgid "MMU load failed"
 msgstr "Neusp. MMU punjenje"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "Neusp. MMU punj"
@@ -962,12 +963,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 spojen"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Magnet. komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -983,23 +984,23 @@ msgstr "Mjereni nagib"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Mjerenje referentne visine kalibracijske tocke"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Mreza"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Izrav. mrez. podl"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1015,14 +1016,14 @@ msgid "Mode change in progress..."
 msgstr "Promjena moda u tijeku..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1048,7 +1049,7 @@ msgid "Move axis"
 msgstr "Pomaknite os"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1062,7 +1063,7 @@ msgid "New firmware version available:"
 msgstr "Dostupna nova verzija firmwera:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1079,7 +1080,7 @@ msgid "No move."
 msgstr "Bez pomaka."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1088,7 +1089,7 @@ msgid "None"
 msgstr "Nema"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1100,7 +1101,7 @@ msgid "Not connected"
 msgstr "Nije povezano"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Ne okrece se"
@@ -1124,7 +1125,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Sada uklonite probni print sa celicne ploce."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1132,12 +1133,12 @@ msgid "Nozzle"
 msgstr "Mlaznica"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Mlaznica."
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1155,7 +1156,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Pronadene stare postavke. Postavit ce se zadani PID, Esteps itd."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1167,12 +1168,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Jednom"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1198,7 +1199,7 @@ msgstr "PINDA se Zagrijava"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA kal."
@@ -1209,7 +1210,7 @@ msgid "PINDA calibration failed"
 msgstr "Kalibracija PINDA nije uspjela"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1219,18 +1220,18 @@ msgstr ""
 "Postavke->PINDA. kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pauzirajte print"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1239,7 +1240,7 @@ msgstr ""
 "mlaznica uhvati papir, odmah iskljucite printer."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1263,7 +1264,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Ocistite grijacu podlogu, a zatim pritisnite gumb."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Molimo ocistite mlaznicu radi kalibracije. Kliknite kada ste gotovi."
 
@@ -1292,19 +1293,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Molimo otvorite klizac i rucno uklonite filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Stavite celicnu plocu na grijacu podlogu."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Pritisnite gumb za praznjenje filamenta"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Molimo odmah izvucite filament"
 
@@ -1320,7 +1321,7 @@ msgstr "Najprije uklonite prijevozne osloce."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Molimo uklonite celicnu plocu sa grijace podloge."
 
@@ -1346,13 +1347,13 @@ msgstr "Molimo nadogradite."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Molimo pricekajte"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Prekidi struje"
@@ -1363,12 +1364,12 @@ msgid "Preheat"
 msgstr "Predgrijavanje"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Predgr. mlaznicu!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Predgrijavanje mlaznice. Molim vas pricekajte."
@@ -1409,18 +1410,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Pritisnite gumb za nastavak temperature mlaznice."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Print je prekinut"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Vent printa:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Printaj sa SD"
 
@@ -1440,7 +1441,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1463,7 +1464,7 @@ msgstr ""
 "vrijednost u postavkama. Print je otkazan."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr "RPi utor"
 
@@ -1490,7 +1491,7 @@ msgid "Rename"
 msgstr "Preimenuj"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Resetiraj"
@@ -1501,13 +1502,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Nastavite print"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Nastavak printa"
 
@@ -1536,20 +1537,20 @@ msgid "Runouts"
 msgstr "Nestalo"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD karti"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "ZAUSTAVLJENO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Trazenje tocke kalibracije podloge"
 
@@ -1568,18 +1569,18 @@ msgstr ""
 "zaslonu."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Odaberite ekstruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Odaberi filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Izaberi jezik"
@@ -1616,7 +1617,7 @@ msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Selftest nije uspio"
@@ -1644,7 +1645,7 @@ msgid "Set temperature:"
 msgstr "Postavi temperaturu:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1658,7 +1659,7 @@ msgstr "Veliki nagib"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Ploca"
 
@@ -1681,7 +1682,7 @@ msgid "Show end stops"
 msgstr "Pokazi granicnike"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Tih"
@@ -1706,19 +1707,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Naisao je neki problem, nametnuto Z-niveliranje..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Vrsta"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Sortiranje datoteka"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1730,7 +1731,7 @@ msgid "Speed"
 msgstr "Brzina"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Okrece se"
@@ -1747,25 +1748,25 @@ msgid "Statistics"
 msgstr "Statistika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Tiho"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Celicna ploca"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Zaustavi print"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1782,7 +1783,7 @@ msgid "Swapped"
 msgstr "Zamjenjeno"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1817,7 +1818,7 @@ msgstr ""
 "optimalnu visinu. Provjerite slike u prirucniku (poglavlje Kalibracija)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1826,23 +1827,23 @@ msgstr ""
 "poglavlje Prvi koraci, odjeljak Tijek kalibracije."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Vrijeme"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Pauza"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Ukupno"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Totalne pogreske"
@@ -1863,13 +1864,13 @@ msgid "Tune"
 msgstr "Ugodi"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Ispraznite fil."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Praznjenje filamenta"
@@ -1912,7 +1913,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Ceka se hladjenje mlaznice i podloge"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1939,7 +1940,7 @@ msgid "Was filament unload successful?"
 msgstr "Je li praznjenje fil. bilo uspjesno?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2012,7 +2013,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ kalibracija nije uspjela. Molimo pogledajte prirucnik."
@@ -2039,7 +2040,7 @@ msgid "Y-correct:"
 msgstr "Y-ispravan:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2060,7 +2061,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Carobnjak uvijek mozete nastaviti iz Kalibracija -> Carobnjak."
 
@@ -2070,7 +2071,7 @@ msgid "Z-correct:"
 msgstr "Z-ispravan:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z-sonda br."
 
@@ -2100,12 +2101,12 @@ msgid "unknown"
 msgstr "nepoznato"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "nepoznato stanje"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Osvjeziti"

lang/po/Firmware_hu.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 vagy regebbi"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 v. ujabb"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "Vart szint: %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Megsem"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Minden rendben"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Keszen vagyunk. Jo nyomtatast!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Abece"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "A Z tengely a felso vegponton van?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Seged"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr "Autom."
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Auto ero"
@@ -122,27 +123,27 @@ msgid "Axis length"
 msgstr "Tengely hossz"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Vissza"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Asztal"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Asztal futes"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Asztal kesz"
@@ -157,7 +158,7 @@ msgstr "Szint. korrekcio"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -171,7 +172,7 @@ msgid "Bed/Heater"
 msgstr "Asztal/Fej futes"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Szij allapot"
@@ -183,17 +184,17 @@ msgstr "Szij teszt"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Aramkieses volt, nyomt. folytatasa?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Fenyes"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Fenyero"
@@ -204,7 +205,7 @@ msgid "Calibrate XYZ"
 msgstr "XYZ kalibracio"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Z kalibracio"
 
@@ -218,7 +219,7 @@ msgstr ""
 "nem er, majd nyomd meg ha keszen vagy."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Z kalibralasa"
@@ -238,7 +239,7 @@ msgid "Calibrating home"
 msgstr "Home poz. kalibralas"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibracio"
 
@@ -258,7 +259,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Filament csere"
@@ -274,13 +275,13 @@ msgid "Changed correctly?"
 msgstr "Sikerult a csere?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "X tengely ellenorzes"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Y tengely ellenorzes"
@@ -291,7 +292,7 @@ msgid "Checking Z axis"
 msgstr "Z tengely ellenorzes"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Asztal ellenorzese"
 
@@ -311,7 +312,7 @@ msgid "Checking hotend"
 msgstr "Hotend ellenorzese"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Szenz. ellenorzese"
@@ -327,17 +328,17 @@ msgid "Color not correct"
 msgstr "Szin nem jo"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Kozossegi"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Folyt"
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Lehutes"
 
@@ -347,13 +348,13 @@ msgid "Copy selected language?"
 msgstr "Kivalasztott nyelv masolasa?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Utkozes"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -361,7 +362,7 @@ msgid "Crash det."
 msgstr "Utkozes erz."
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Utkozes erzekelve."
 
@@ -377,13 +378,13 @@ msgstr ""
 "kapcsolhato be"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Filament vagasa"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Vago"
@@ -399,7 +400,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Sotet"
 
@@ -410,7 +411,7 @@ msgstr "Motorok kikapcsol."
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -435,7 +436,7 @@ msgid "E-correct:"
 msgstr "E-korrekcio:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "HIBA:"
 
@@ -445,7 +446,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "HIBA: A fil. szenzor nem valaszol, ellenorizd a csatlakozast."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Filament kiadasa"
@@ -471,13 +472,13 @@ msgid "Endstops"
 msgstr "Vegallaskapcsolok"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Extruder vent.:"
@@ -488,14 +489,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autobetolt"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FSz akcio"
@@ -526,33 +527,33 @@ msgid "False triggering"
 msgstr "Hamis kivalto ok"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Vent. sebesseg"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Ventillator teszt"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Vent.proba"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fil. kifutasok"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -561,12 +562,12 @@ msgstr "Fil. szenzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament es a szine rendben?"
@@ -577,7 +578,7 @@ msgid "Filament not loaded"
 msgstr "Fil. nincs betoltve"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -594,13 +595,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "A fajl vege hianyzik. Folytatod igy is?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Mozdulat befejezese"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Elso reteg kal."
@@ -623,7 +624,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Elso targyhuto vent?"
@@ -653,13 +654,13 @@ msgstr ""
 "megallitva."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "A G-kod mas nyomtato tipusra lett elokesztve. Folytassam?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -683,14 +684,14 @@ msgstr ""
 "Nyomtatas megallitva."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW beallitas"
@@ -701,7 +702,7 @@ msgid "Heater/Thermistor"
 msgstr "Futotest/Termisztor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Futes folyamatban"
@@ -712,13 +713,13 @@ msgid "Heating disabled by safety timer."
 msgstr "A bizonsagi idozito leallitotta a futest"
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Futes kesz."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -729,7 +730,7 @@ msgstr ""
 "nyomtathatsz is."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -738,7 +739,7 @@ msgstr ""
 "a beallitasi folyamaton?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -769,7 +770,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Info kepernyo"
 
@@ -793,30 +794,30 @@ msgstr ""
 "gombot."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Filament behelyezve?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Rajta van az acellap a targyasztalon?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iteracio"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Utolso nyomtatas"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -828,7 +829,7 @@ msgid "Left"
 msgstr "Bal"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Bal hotend vent.?"
@@ -839,12 +840,12 @@ msgid "Left side [μm]"
 msgstr "Bal [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Fenyes szint"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Sotet szint"
 
@@ -854,7 +855,7 @@ msgid "Lin. correction"
 msgstr "Lin. korrekcio"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Z magassag beall."
@@ -865,7 +866,7 @@ msgid "Load all"
 msgstr "Osszes betolt."
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -882,7 +883,7 @@ msgid "Loading color"
 msgstr "Szin tisztitasa"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -895,7 +896,7 @@ msgid "Loose pulley"
 msgstr "Laza szijtarcsa"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Hangos"
@@ -911,7 +912,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmver eszlelve MK3 nyomtaton"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU Mod"
@@ -932,7 +933,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Folytatom..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "MMU hibak"
@@ -943,7 +944,7 @@ msgid "MMU load failed"
 msgstr "MMU betolt.hiba"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU bet. hibak"
@@ -964,12 +965,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 csatlakozott"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Magnes komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -985,23 +986,23 @@ msgstr "Meroleg. hiba"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Kalibracios pont magassaganak merese"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Halo"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Asztal szintezes"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1017,14 +1018,14 @@ msgid "Mode change in progress..."
 msgstr "Modvaltas folyamatban..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1050,7 +1051,7 @@ msgid "Move axis"
 msgstr "Tengely mozgatasa"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1064,7 +1065,7 @@ msgid "New firmware version available:"
 msgstr "Uj firmver verzio erheto el:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1081,7 +1082,7 @@ msgid "No move."
 msgstr "Nincs mozgas."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1090,7 +1091,7 @@ msgid "None"
 msgstr "Nincs"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1102,7 +1103,7 @@ msgid "Not connected"
 msgstr "Nincs csatlakoztatva"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Nem forog"
@@ -1125,7 +1126,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Vedd le a tesztnyomatot az acellaprol."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1133,12 +1134,12 @@ msgid "Nozzle"
 msgstr "Fuvoka"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Fuv. atm."
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1156,7 +1157,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Regi beallitasokat talaltam. Az alap PID, Esteps, stb. lesz beallitva."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1168,12 +1169,12 @@ msgid "On"
 msgstr "Be"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Egyszer"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1199,7 +1200,7 @@ msgstr "PINDA Futes"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA kal."
@@ -1210,7 +1211,7 @@ msgid "PINDA calibration failed"
 msgstr "PINDA kalibracio sikertelen."
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1218,18 +1219,18 @@ msgid ""
 msgstr "PINDA kalibracio sikeres es aktiv. A Beallitasok ->PINDA kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Szun."
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Nyomtatas szunet"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1238,7 +1239,7 @@ msgstr ""
 "fuvoka hozzaer a papirlaphoz, azonnal kapcsold ki a nyomtatot."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1262,7 +1263,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Kerlek, tisztisd le a targyasztalt, majd nyomd meg a gombot."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Kerlek, tisztisd meg a fuvokat kalibracio elott. Nyomd meg a gombot, ha "
@@ -1297,19 +1298,19 @@ msgstr ""
 "Kerlek, nyisd ki a nyomogorgo ajtajat, es tavolitsd el a filamentet kezzel."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Kerlek, helyzed az acellapot a targyasztalra."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Kerlek, nyomd meg a gombot a filament kiadasahoz"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Kerlek, huzd ki a filamentet most"
 
@@ -1325,7 +1326,7 @@ msgstr "Tavolitsd el a szallitasi segedanyagokat."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Kerlek, tavolisd el az acellapot az asztalrol."
 
@@ -1351,13 +1352,13 @@ msgstr "Kerlek frissits."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Kerlek varj"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Aramkimaradasok"
@@ -1368,12 +1369,12 @@ msgid "Preheat"
 msgstr "Elofutes"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Futsd fel a fuvokat!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Fuvoka futese folyamatban. Kerlek, varj."
@@ -1414,18 +1415,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Nyomd meg a gombot a fuvoka ismetelt felfutesehez."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Nyomt. megszakitva"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Targyhuto:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Nyomtatas SD-rol"
 
@@ -1445,7 +1446,7 @@ msgid "Printer IP Addr:"
 msgstr "Nyomtato IP cime:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1468,7 +1469,7 @@ msgstr ""
 "beallitasokban. Nyomtatas megallitva."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1495,7 +1496,7 @@ msgid "Rename"
 msgstr "Atnevezes"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Ujrainditas"
@@ -1506,13 +1507,13 @@ msgid "Reset XYZ calibr."
 msgstr "XYZ kal. nullazas"
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Nyomt. folytatasa"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Nyomtatas folytatasa"
 
@@ -1541,20 +1542,20 @@ msgid "Runouts"
 msgstr "Kifutas"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SDkartya"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "MEGALLITVA."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Kalibracios pont keresese az asztalon"
 
@@ -1571,18 +1572,18 @@ msgid ""
 msgstr "Valassz egy filamentet az elso reteg kalibraciojahoz a menubol."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Extruder valasztas:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Valassz filamentet:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Valassz nyelvet"
@@ -1620,7 +1621,7 @@ msgid "Selftest error!"
 msgstr "Ondiagnosztika hiba!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Ondiag. sikertelen"
@@ -1647,7 +1648,7 @@ msgid "Set temperature:"
 msgstr "Homerseklet beall.:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1661,7 +1662,7 @@ msgstr "NagyMerol.hiba"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Acellap"
 
@@ -1684,7 +1685,7 @@ msgid "Show end stops"
 msgstr "Vegallaskapcsolok"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Halk"
@@ -1709,19 +1710,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Hiba tortent, Z szintezes indul..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Rendez"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Fajlok rendezese"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1733,7 +1734,7 @@ msgid "Speed"
 msgstr "Sebesseg"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Forog"
@@ -1749,25 +1750,25 @@ msgid "Statistics"
 msgstr "Statisztika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Halk"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Acellapok"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Nyomt. megallitasa"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1784,7 +1785,7 @@ msgid "Swapped"
 msgstr "Felcserelve"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1820,7 +1821,7 @@ msgstr ""
 "Kalibracio fejezeteben."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1829,23 +1830,23 @@ msgstr ""
 "fejezetenek Kalibracio menete bekezdeset."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Ido"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Idotullepes"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Ossz."
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Ossz. hiba"
@@ -1866,13 +1867,13 @@ msgid "Tune"
 msgstr "Finomhangolas"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Filament kiadasa"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Filament kiadasa"
@@ -1916,7 +1917,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "A fuvoka es az asztal kihuleset varom."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1943,7 +1944,7 @@ msgid "Was filament unload successful?"
 msgstr "Sikerult kivenni a filamentet?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2019,7 +2020,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ kalibracio sikertelen. Kerlek, nezz bele a kezikonyvbe."
@@ -2046,7 +2047,7 @@ msgid "Y-correct:"
 msgstr "Y-korrekcio:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2067,7 +2068,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "A Varazsolt barmikor elered a Kalibracio -> Varazslo menubol."
 
@@ -2077,7 +2078,7 @@ msgid "Z-correct:"
 msgstr "Z-korrekcio:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z meres szama"
 
@@ -2107,12 +2108,12 @@ msgid "unknown"
 msgstr "ismeretlen"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "ismeretlen allapot"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Frissites"

lang/po/Firmware_it.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 o inferiore"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 o superiore"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "atteso livello %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Annulla"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Nessun errore"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Tutto fatto. Buona stampa!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfabeti"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "I carrelli Z sin/des sono altezza max?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Assist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr "Auto"
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Trova origine"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Automatico"
@@ -123,27 +124,27 @@ msgid "Axis length"
 msgstr "Lunghezza dell'asse"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Indietro"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Piano"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Riscald. piano"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Piano fatto."
@@ -158,7 +159,7 @@ msgstr "Correz. liv.piano"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -172,7 +173,7 @@ msgid "Bed/Heater"
 msgstr "Piano/Riscald."
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Stato cinghie"
@@ -184,17 +185,17 @@ msgstr "Test cinghie"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Blackout rilevato. Recuperare stampa?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Chiaro"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Luminosita'"
@@ -205,7 +206,7 @@ msgid "Calibrate XYZ"
 msgstr "Calibra XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Calibra Z"
 
@@ -219,7 +220,7 @@ msgstr ""
 "all'altezza massima. Click per terminare."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Calibrando Z"
@@ -239,7 +240,7 @@ msgid "Calibrating home"
 msgstr "Calibrazione Home"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Calibrazione"
 
@@ -259,7 +260,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Cambia filamento"
@@ -275,13 +276,13 @@ msgid "Changed correctly?"
 msgstr "Cambio corretto?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Verifica asse X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Verifica asse Y"
@@ -292,7 +293,7 @@ msgid "Checking Z axis"
 msgstr "Verifica asse Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Verifica piano"
 
@@ -312,7 +313,7 @@ msgid "Checking hotend"
 msgstr "Verifica ugello"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Controllo sensori"
@@ -328,17 +329,17 @@ msgid "Color not correct"
 msgstr "Colore non puro"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Contribuiti"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Cont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Raffredda"
 
@@ -348,13 +349,13 @@ msgid "Copy selected language?"
 msgstr "Copiare la lingua selezionata?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Impatto"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -362,7 +363,7 @@ msgid "Crash det."
 msgstr "Rileva.crash"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Rilevato impatto."
 
@@ -378,13 +379,13 @@ msgstr ""
 "in Modalita normale"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Taglia filamento"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Tagliatr."
@@ -400,7 +401,7 @@ msgid "Date:"
 msgstr "Data:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Scuro"
 
@@ -411,7 +412,7 @@ msgstr "Disabilita motori"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -436,7 +437,7 @@ msgid "E-correct:"
 msgstr "Correzione-E:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "ERRORE:"
 
@@ -446,7 +447,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "ERRORE: il sensore filam. non risponde,Controllare conness."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Espelli fil."
@@ -472,13 +473,13 @@ msgid "Endstops"
 msgstr "Finecorsa"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr "Estrusore"
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Vent. estrusore:"
@@ -489,14 +490,14 @@ msgid "Extruder info"
 msgstr "Info estrusore"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "Autocar.fil."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "Azione FS"
@@ -527,33 +528,33 @@ msgid "False triggering"
 msgstr "Falso innesco"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Velocita vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test ventola"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Control.vent"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fil. esauriti"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -562,12 +563,12 @@ msgstr "Sensore fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr "Filamento"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filamento estruso e con colore corretto?"
@@ -578,7 +579,7 @@ msgid "Filament not loaded"
 msgstr "Fil. non caricato"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -595,13 +596,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "File incompleto. Continuare comunque?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Finaliz. spostamenti"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Cal. primo strato"
@@ -624,7 +625,7 @@ msgid "Flow"
 msgstr "Flusso"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Ventola frontale?"
@@ -654,13 +655,13 @@ msgstr ""
 "slice del modello. Stampa annullata."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-code processato per una stampante diversa. Continuare?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -684,14 +685,14 @@ msgstr ""
 "firmware. Stampa annullata."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "Impostazioni HW"
@@ -702,7 +703,7 @@ msgid "Heater/Thermistor"
 msgstr "Riscald./Termist."
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Riscaldamento..."
@@ -713,13 +714,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Riscaldamento fermato dal timer di sicurezza."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Riscald. completo"
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -730,7 +731,7 @@ msgstr ""
 "stampare."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -739,7 +740,7 @@ msgstr ""
 "processo di configurazione?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -770,7 +771,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Schermata info"
 
@@ -793,30 +794,30 @@ msgstr ""
 "Inserire filamento (senza caricarlo) nell'estrusore e premere la manopola."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Il filamento e' stato caricato?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Piastra d'acciaio su piano riscaldato?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iterazione"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Ultima stampa"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -828,7 +829,7 @@ msgid "Left"
 msgstr "Sinistra"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Vent SX hotend?"
@@ -839,12 +840,12 @@ msgid "Left side [μm]"
 msgstr "Sinistra [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Liv. Chiaro"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Liv. Scuro"
 
@@ -854,7 +855,7 @@ msgid "Lin. correction"
 msgstr "Correzione lineare"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Compensazione Z"
@@ -865,7 +866,7 @@ msgid "Load all"
 msgstr "Caricare tutti"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -882,7 +883,7 @@ msgid "Loading color"
 msgstr "Caricando colore"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -895,7 +896,7 @@ msgid "Loose pulley"
 msgstr "Puleggia lenta"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Forte"
@@ -911,7 +912,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S rilevato su stampante MK3"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "Mod. MMU"
@@ -932,7 +933,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Riprendendo..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Fallimenti MMU"
@@ -943,7 +944,7 @@ msgid "MMU load failed"
 msgstr "Caricam. MMU fallito"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "Car MMU falliti"
@@ -964,12 +965,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 connessa"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Comp. Magneti"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -985,23 +986,23 @@ msgstr "Dev. misurata"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Misura altezza di rif. del punto di calib."
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Griglia"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Liv. griglia piano"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1017,14 +1018,14 @@ msgid "Mode change in progress..."
 msgstr "Cambio modalita in corso..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modello"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr "Motore"
@@ -1050,7 +1051,7 @@ msgid "Move axis"
 msgstr "Muovi asse"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1064,7 +1065,7 @@ msgid "New firmware version available:"
 msgstr "Nuova vers. firmware disponibile:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1081,7 +1082,7 @@ msgid "No move."
 msgstr "Nessun movimento."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1090,7 +1091,7 @@ msgid "None"
 msgstr "Nessuno"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1102,7 +1103,7 @@ msgid "Not connected"
 msgstr "Non connesso"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Non gira"
@@ -1124,7 +1125,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Ora rimuovete la stampa di prova dalla piastra in acciaio."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1132,12 +1133,12 @@ msgid "Nozzle"
 msgstr "Ugello"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Dia.Ugello"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1157,7 +1158,7 @@ msgstr ""
 "predefiniti di PID, Esteps etc."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1169,12 +1170,12 @@ msgid "On"
 msgstr "On"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Singolo"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1200,7 +1201,7 @@ msgstr "Riscaldamento PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "Calib. PINDA"
@@ -1211,7 +1212,7 @@ msgid "PINDA calibration failed"
 msgstr "Calibrazione temperatura fallita"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1221,18 +1222,18 @@ msgstr ""
 "Impostazioni ->Calib. PINDA"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pausa"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Metti in pausa"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1241,7 +1242,7 @@ msgstr ""
 "punti. In caso l'ugello muova il foglio spegnere subito la stampante."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1265,7 +1266,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Per favore pulisci il piatto, poi premi la manopola."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Pulire l'ugello per la calibrazione, poi fare click."
 
@@ -1296,19 +1297,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Aprire la guida filam. e rimuovere il filam. a mano"
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Per favore posizionate la piastra d'acciaio sul piano riscaldato."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Premete la manopola per scaricare il filamento"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Estrarre il filamento immediatamente"
 
@@ -1324,7 +1325,7 @@ msgstr "Per favore rimuovete i materiali da spedizione"
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Rimuovete la piastra di acciaio dal piano riscaldato"
 
@@ -1350,13 +1351,13 @@ msgstr "Prego aggiornare."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Attendere"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Interr. corr."
@@ -1367,12 +1368,12 @@ msgid "Preheat"
 msgstr "Preriscalda"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Prerisc. ugello!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Preriscaldando l'ugello. Attendere prego."
@@ -1413,18 +1414,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Premete la manopola per recuperare la temperatura dell'ugello."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Stampa interrotta"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Vent.stam:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Stampa da SD"
 
@@ -1444,7 +1445,7 @@ msgid "Printer IP Addr:"
 msgstr "Ind. IP stampante:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1467,7 +1468,7 @@ msgstr ""
 "Stampa annullata."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr "Porta RPi"
 
@@ -1494,7 +1495,7 @@ msgid "Rename"
 msgstr "Rinomina"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Reset"
@@ -1505,13 +1506,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset calibr. XYZ."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Riprendi stampa"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Riprendi stampa"
 
@@ -1540,20 +1541,20 @@ msgid "Runouts"
 msgstr "Esaurim"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "Mem. SD"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "ARRESTATO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Ricerca punti calibrazione piano"
 
@@ -1572,18 +1573,18 @@ msgstr ""
 "menu sullo schermo."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Seleziona estrusore:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Seleziona il filam.:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Seleziona lingua"
@@ -1621,7 +1622,7 @@ msgid "Selftest error!"
 msgstr "Errore Autotest!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Autotest fallito"
@@ -1647,7 +1648,7 @@ msgid "Set temperature:"
 msgstr "Imposta temperatura:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1661,7 +1662,7 @@ msgstr "Deviaz. forte"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Piano"
 
@@ -1684,7 +1685,7 @@ msgid "Show end stops"
 msgstr "Stato finecorsa"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Silenz."
@@ -1709,19 +1710,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Sono stati rilevati problemi, avviato livellamento Z ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Ordina"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Ordinando i file"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1733,7 +1734,7 @@ msgid "Speed"
 msgstr "Velocita"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Gira"
@@ -1750,25 +1751,25 @@ msgid "Statistics"
 msgstr "Statistiche"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Silenz."
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Piani d'acciaio"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Arresta stampa"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1785,7 +1786,7 @@ msgid "Swapped"
 msgstr "Scambiato"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1821,7 +1822,7 @@ msgstr ""
 "manuale (capitolo sulla calibrazione)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1830,23 +1831,23 @@ msgstr ""
 "Primi Passi, sezione Sequenza di Calibrazione."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Cron."
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Timeout"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Totale"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Totale fallimenti"
@@ -1867,13 +1868,13 @@ msgid "Tune"
 msgstr "Regola"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Scarica filam."
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Scaricando filamento"
@@ -1917,7 +1918,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "In attesa del raffreddamento dell'ugello e del piano"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1944,7 +1945,7 @@ msgid "Was filament unload successful?"
 msgstr "Filamento scaricato con successo?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2017,7 +2018,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Calibrazione XYZ fallita. Si prega di consultare il manuale."
@@ -2043,7 +2044,7 @@ msgid "Y-correct:"
 msgstr "Correzione-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2064,7 +2065,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "E possibile riprendere il Wizard in qualsiasi momento attraverso "
@@ -2076,7 +2077,7 @@ msgid "Z-correct:"
 msgstr "Correzione-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Nr. Z-test"
 
@@ -2106,12 +2107,12 @@ msgid "unknown"
 msgstr "sconosciuto"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "stato sconosciuto"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Ricaricare"

lang/po/Firmware_lb.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr ""
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ""
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr ""
@@ -122,27 +123,27 @@ msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr ""
@@ -157,7 +158,7 @@ msgstr ""
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -169,7 +170,7 @@ msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr ""
@@ -181,17 +182,17 @@ msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr ""
@@ -202,7 +203,7 @@ msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr ""
 
@@ -214,7 +215,7 @@ msgid ""
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr ""
@@ -232,7 +233,7 @@ msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr ""
 
@@ -252,7 +253,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr ""
@@ -268,13 +269,13 @@ msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr ""
@@ -285,7 +286,7 @@ msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr ""
 
@@ -305,7 +306,7 @@ msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr ""
@@ -321,17 +322,17 @@ msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr ""
 
@@ -341,13 +342,13 @@ msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -355,7 +356,7 @@ msgid "Crash det."
 msgstr ""
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr ""
 
@@ -368,13 +369,13 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr ""
@@ -390,7 +391,7 @@ msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -401,7 +402,7 @@ msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -421,7 +422,7 @@ msgid "E-correct:"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -431,7 +432,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr ""
@@ -457,13 +458,13 @@ msgid "Endstops"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr ""
@@ -474,14 +475,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr ""
@@ -512,33 +513,33 @@ msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -547,12 +548,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr ""
@@ -563,7 +564,7 @@ msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -580,13 +581,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr ""
@@ -607,7 +608,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr ""
@@ -635,13 +636,13 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -661,14 +662,14 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr ""
@@ -679,7 +680,7 @@ msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr ""
@@ -690,13 +691,13 @@ msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -704,7 +705,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -713,7 +714,7 @@ msgstr ""
 "duerch de Setupprozess guideieren?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -742,7 +743,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr ""
 
@@ -764,30 +765,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -799,7 +800,7 @@ msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr ""
@@ -810,12 +811,12 @@ msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr ""
 
@@ -825,7 +826,7 @@ msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr ""
@@ -836,7 +837,7 @@ msgid "Load all"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -853,7 +854,7 @@ msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -866,7 +867,7 @@ msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr ""
@@ -882,7 +883,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr ""
@@ -903,7 +904,7 @@ msgid "MMU OK. Resuming..."
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr ""
@@ -914,7 +915,7 @@ msgid "MMU load failed"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr ""
@@ -935,12 +936,12 @@ msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -956,23 +957,23 @@ msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -988,14 +989,14 @@ msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1021,7 +1022,7 @@ msgid "Move axis"
 msgstr ""
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1035,7 +1036,7 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1052,7 +1053,7 @@ msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1061,7 +1062,7 @@ msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1073,7 +1074,7 @@ msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr ""
@@ -1095,7 +1096,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1103,12 +1104,12 @@ msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr ""
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1126,7 +1127,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1138,12 +1139,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1169,7 +1170,7 @@ msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr ""
@@ -1180,7 +1181,7 @@ msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1188,25 +1189,25 @@ msgid ""
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1228,7 +1229,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
@@ -1256,19 +1257,19 @@ msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr ""
 
@@ -1284,7 +1285,7 @@ msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
@@ -1310,13 +1311,13 @@ msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr ""
@@ -1327,12 +1328,12 @@ msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr ""
@@ -1373,18 +1374,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr ""
 
@@ -1404,7 +1405,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1423,7 +1424,7 @@ msgid ""
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1448,7 +1449,7 @@ msgid "Rename"
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1459,13 +1460,13 @@ msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr ""
 
@@ -1492,20 +1493,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
@@ -1522,18 +1523,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr ""
@@ -1569,7 +1570,7 @@ msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr ""
@@ -1595,7 +1596,7 @@ msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1609,7 +1610,7 @@ msgstr ""
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr ""
 
@@ -1628,7 +1629,7 @@ msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr ""
@@ -1651,19 +1652,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr ""
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1675,7 +1676,7 @@ msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr ""
@@ -1691,25 +1692,25 @@ msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1726,7 +1727,7 @@ msgid "Swapped"
 msgstr ""
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1759,30 +1760,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr ""
@@ -1803,13 +1804,13 @@ msgid "Tune"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr ""
@@ -1849,7 +1850,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1876,7 +1877,7 @@ msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -1945,7 +1946,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
@@ -1971,7 +1972,7 @@ msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -1992,7 +1993,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
@@ -2002,7 +2003,7 @@ msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr ""
 
@@ -2032,12 +2033,12 @@ msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr ""
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_lt.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr ""
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ""
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr ""
@@ -122,27 +123,27 @@ msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr ""
@@ -157,7 +158,7 @@ msgstr ""
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -169,7 +170,7 @@ msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr ""
@@ -181,17 +182,17 @@ msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr ""
@@ -202,7 +203,7 @@ msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr ""
 
@@ -214,7 +215,7 @@ msgid ""
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr ""
@@ -232,7 +233,7 @@ msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr ""
 
@@ -252,7 +253,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr ""
@@ -268,13 +269,13 @@ msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr ""
@@ -285,7 +286,7 @@ msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr ""
 
@@ -305,7 +306,7 @@ msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr ""
@@ -321,17 +322,17 @@ msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr ""
 
@@ -341,13 +342,13 @@ msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -355,7 +356,7 @@ msgid "Crash det."
 msgstr ""
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr ""
 
@@ -368,13 +369,13 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr ""
@@ -390,7 +391,7 @@ msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -401,7 +402,7 @@ msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -421,7 +422,7 @@ msgid "E-correct:"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -431,7 +432,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr ""
@@ -457,13 +458,13 @@ msgid "Endstops"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr ""
@@ -474,14 +475,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr ""
@@ -512,33 +513,33 @@ msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -547,12 +548,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr ""
@@ -563,7 +564,7 @@ msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -580,13 +581,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr ""
@@ -607,7 +608,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr ""
@@ -635,13 +636,13 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -661,14 +662,14 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr ""
@@ -679,7 +680,7 @@ msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr ""
@@ -690,13 +691,13 @@ msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -704,7 +705,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -713,7 +714,7 @@ msgstr ""
 "padetu jums atlikti sarankos procesa?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -742,7 +743,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr ""
 
@@ -764,30 +765,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -799,7 +800,7 @@ msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr ""
@@ -810,12 +811,12 @@ msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr ""
 
@@ -825,7 +826,7 @@ msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr ""
@@ -836,7 +837,7 @@ msgid "Load all"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -853,7 +854,7 @@ msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -866,7 +867,7 @@ msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr ""
@@ -882,7 +883,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr ""
@@ -903,7 +904,7 @@ msgid "MMU OK. Resuming..."
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr ""
@@ -914,7 +915,7 @@ msgid "MMU load failed"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr ""
@@ -935,12 +936,12 @@ msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -956,23 +957,23 @@ msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -988,14 +989,14 @@ msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1021,7 +1022,7 @@ msgid "Move axis"
 msgstr ""
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1035,7 +1036,7 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1052,7 +1053,7 @@ msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1061,7 +1062,7 @@ msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1073,7 +1074,7 @@ msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr ""
@@ -1095,7 +1096,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1103,12 +1104,12 @@ msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr ""
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1126,7 +1127,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1138,12 +1139,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1169,7 +1170,7 @@ msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr ""
@@ -1180,7 +1181,7 @@ msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1188,25 +1189,25 @@ msgid ""
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1228,7 +1229,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
@@ -1256,19 +1257,19 @@ msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr ""
 
@@ -1284,7 +1285,7 @@ msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
@@ -1310,13 +1311,13 @@ msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr ""
@@ -1327,12 +1328,12 @@ msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr ""
@@ -1373,18 +1374,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr ""
 
@@ -1404,7 +1405,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1423,7 +1424,7 @@ msgid ""
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1448,7 +1449,7 @@ msgid "Rename"
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1459,13 +1460,13 @@ msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr ""
 
@@ -1492,20 +1493,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
@@ -1522,18 +1523,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr ""
@@ -1569,7 +1570,7 @@ msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr ""
@@ -1595,7 +1596,7 @@ msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1609,7 +1610,7 @@ msgstr ""
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr ""
 
@@ -1628,7 +1629,7 @@ msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr ""
@@ -1651,19 +1652,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr ""
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1675,7 +1676,7 @@ msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr ""
@@ -1691,25 +1692,25 @@ msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1726,7 +1727,7 @@ msgid "Swapped"
 msgstr ""
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1759,30 +1760,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr ""
@@ -1803,13 +1804,13 @@ msgid "Tune"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr ""
@@ -1849,7 +1850,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1876,7 +1877,7 @@ msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -1945,7 +1946,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
@@ -1971,7 +1972,7 @@ msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -1992,7 +1993,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
@@ -2002,7 +2003,7 @@ msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr ""
 
@@ -2032,12 +2033,12 @@ msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr ""
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_nl.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 of ouder"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 of nieuwer"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s niveau verwacht"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Annuleren"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Allemaal goed"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Klaar. Happy printing!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfabet"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Zijn beide Z wagen heelemaal boven?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Assist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Startpositie"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr ""
@@ -125,27 +126,27 @@ msgid "Axis length"
 msgstr "Aslengte"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "terug"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Bed opwarmen"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Bed klaar"
@@ -160,7 +161,7 @@ msgstr "Bed niveau correct"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -174,7 +175,7 @@ msgid "Bed/Heater"
 msgstr "Bed/Verwarming"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Riem status"
@@ -186,17 +187,17 @@ msgstr "Riemtest"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Stroomstoring. Print herstellen?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Helder"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Helderheid"
@@ -207,7 +208,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibratie XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibratie Z"
 
@@ -221,7 +222,7 @@ msgstr ""
 "stoppers. Druk knop als klaar."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibrere Z"
@@ -241,7 +242,7 @@ msgid "Calibrating home"
 msgstr "Kalibreren start"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibratie"
 
@@ -261,7 +262,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Wissel filament"
@@ -277,13 +278,13 @@ msgid "Changed correctly?"
 msgstr "Wissel ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Controleer X as"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Controleer Y as"
@@ -294,7 +295,7 @@ msgid "Checking Z axis"
 msgstr "Controleer Z as"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Controleer bed"
 
@@ -314,7 +315,7 @@ msgid "Checking hotend"
 msgstr "Controleer hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Controleer sensors"
@@ -330,17 +331,17 @@ msgid "Color not correct"
 msgstr "Kleur niet juist"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Van de community"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Door."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Afkoelen"
 
@@ -350,13 +351,13 @@ msgid "Copy selected language?"
 msgstr "Geselecteerde taal kopieren?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -364,7 +365,7 @@ msgid "Crash det."
 msgstr "Crashdet."
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Crash gedetecteerd."
 
@@ -380,13 +381,13 @@ msgstr ""
 "gebruikt worden"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Fil. knippen"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Mes"
@@ -402,7 +403,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -413,7 +414,7 @@ msgstr "Motoren uit"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -438,7 +439,7 @@ msgid "E-correct:"
 msgstr "E-correctie:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "FOUT:"
 
@@ -448,7 +449,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "FOUT: Filamentsensor reageert niet, controleer de verbinding."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Fil. uitwerpen"
@@ -474,13 +475,13 @@ msgid "Endstops"
 msgstr "Eindstops"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr ""
@@ -491,14 +492,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autoladen"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS actie"
@@ -529,33 +530,33 @@ msgid "False triggering"
 msgstr "Valse triggering"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Fan snelh."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fil. fouten"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -564,12 +565,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament extrudeert met de juiste kleur?"
@@ -580,7 +581,7 @@ msgid "Filament not loaded"
 msgstr "Fil. niet geladen"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -597,13 +598,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Bestand onvolledig. Toch doorgaan?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Voortgang afwerken"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Eerste laag kal."
@@ -626,7 +627,7 @@ msgid "Flow"
 msgstr "Stromen"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Voorzijde fan?"
@@ -656,13 +657,13 @@ msgstr ""
 "Druk geannuleerd."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-Code is voor een ander printertype geslict. Doorgaan?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -686,14 +687,14 @@ msgstr ""
 "alsjeblieft. Druk geannuleerd."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW Configuratie"
@@ -704,7 +705,7 @@ msgid "Heater/Thermistor"
 msgstr "Verwarmer/Therm."
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Opwarmen"
@@ -715,13 +716,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Verwarming uitgeschakeld door veiligheidstimer."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Opwarmen klaar."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -732,7 +733,7 @@ msgstr ""
 "printen."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -741,7 +742,7 @@ msgstr ""
 "installatieproces?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -772,7 +773,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Info scherm"
 
@@ -795,30 +796,30 @@ msgstr ""
 "Steek a.u.b. filament (maar niet laden) in de extruder en druk op knop."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Is filament geladen?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Ligt de staalplaat op het bed?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iteratie"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Laatste print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -830,7 +831,7 @@ msgid "Left"
 msgstr "Links"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Linker hotend fan?"
@@ -841,12 +842,12 @@ msgid "Left side [μm]"
 msgstr "Linkerkant[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Helder waard"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Dim waarde"
 
@@ -856,7 +857,7 @@ msgid "Lin. correction"
 msgstr "Lineaire correctie"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Live Z aanpassen"
@@ -867,7 +868,7 @@ msgid "Load all"
 msgstr "Laad alle"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -884,7 +885,7 @@ msgid "Loading color"
 msgstr "Laden kleur"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -897,7 +898,7 @@ msgid "Loose pulley"
 msgstr "Losse riemschijf"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Hard"
@@ -913,7 +914,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S-firmware op MK3-printer ontdekt"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU Mod"
@@ -934,7 +935,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Hervatten..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "MMU fout"
@@ -945,7 +946,7 @@ msgid "MMU load failed"
 msgstr "MMU laden mislukt"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU laadfout"
@@ -966,12 +967,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 verbonden"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Magnet. comp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -987,23 +988,23 @@ msgstr "Scheefheid"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Referentie hoogte van het kalibratiepunt meten"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Mesh bed Leveling"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1019,14 +1020,14 @@ msgid "Mode change in progress..."
 msgstr "Moduswijziging bezig..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1052,7 +1053,7 @@ msgid "Move axis"
 msgstr "As verplaatsen"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1066,7 +1067,7 @@ msgid "New firmware version available:"
 msgstr "Nieuwe firmware versie beschikbaar:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1083,7 +1084,7 @@ msgid "No move."
 msgstr "Geen beweging."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1092,7 +1093,7 @@ msgid "None"
 msgstr "Geen"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1104,7 +1105,7 @@ msgid "Not connected"
 msgstr "Niet verbonden"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Draait niet"
@@ -1126,7 +1127,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Verwijder nu de testprint van staalplaat."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1134,12 +1135,12 @@ msgid "Nozzle"
 msgstr "Tuit"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Tuit d."
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1159,7 +1160,7 @@ msgstr ""
 "geladen."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1171,12 +1172,12 @@ msgid "On"
 msgstr "Aan"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Eenmaal"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1202,7 +1203,7 @@ msgstr "PINDA opwarmen"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA kalib."
@@ -1213,7 +1214,7 @@ msgid "PINDA calibration failed"
 msgstr "PINDA-kalibratie mislukt"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1223,18 +1224,18 @@ msgstr ""
 "menu Instellingen-> PINDA kalib."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pauze"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Print pauzeren"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1243,7 +1244,7 @@ msgstr ""
 "punten. Als de tuit het papier beweegt, de printer onmiddellijk uitschakelen."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1268,7 +1269,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Maak het bed schoon en druk op de knop."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Reinig de tuit voor de kalibratie. Druk op de knop wanneer gereed."
 
@@ -1299,19 +1300,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Open rondsel en verwijder filament handmatig."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Leg staalplaat op bed."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Druk op de knop om filament te verwijderen"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Trek onmiddellijk de filament eruit"
 
@@ -1327,7 +1328,7 @@ msgstr "Verwijder eerst de transport beschermers."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Verwijder staalplaat van het bed."
 
@@ -1353,13 +1354,13 @@ msgstr "Voer een upgrade uit"
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Even geduld aub"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Stroomstoringen"
@@ -1370,12 +1371,12 @@ msgid "Preheat"
 msgstr "Voorverwarmen"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Tuit voorverwarmen!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Opwarmen van de tuit. Wacht aub."
@@ -1416,18 +1417,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Druk op de knop om de temperatuur van de tuit te hervatten."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Print afgebroken"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Print van SD"
 
@@ -1447,7 +1448,7 @@ msgid "Printer IP Addr:"
 msgstr "Printer IP-adres:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1471,7 +1472,7 @@ msgstr ""
 "de waarde in de instellingen. Afdrukken geannuleerd."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1497,7 +1498,7 @@ msgid "Rename"
 msgstr "Hernoem"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1508,13 +1509,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Print hervatten"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Hervatten print"
 
@@ -1543,20 +1544,20 @@ msgid "Runouts"
 msgstr "Fouten"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD kaart"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "GESTOPT."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Zoeken bed kalibratiepunt"
 
@@ -1575,18 +1576,18 @@ msgstr ""
 "het schermmenu."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Kies extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Kies filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Kies taal"
@@ -1624,7 +1625,7 @@ msgid "Selftest error!"
 msgstr "Zelftest fout!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Zelftest mislukt"
@@ -1652,7 +1653,7 @@ msgid "Set temperature:"
 msgstr "Temp. instellen:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1666,7 +1667,7 @@ msgstr "Erg scheef"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Staalplaat"
 
@@ -1689,7 +1690,7 @@ msgid "Show end stops"
 msgstr "Toon endstops"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Stil"
@@ -1714,19 +1715,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Er is een probleem opgetreden, Z-kalibratie afgedwongen ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Sort."
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Bestanden sorteren"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1738,7 +1739,7 @@ msgid "Speed"
 msgstr "Snelheid"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Draait"
@@ -1756,25 +1757,25 @@ msgid "Statistics"
 msgstr "Statistieken"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Stil"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Staalplaten"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Print stoppen"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1791,7 +1792,7 @@ msgid "Swapped"
 msgstr "Gewisseld"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1827,7 +1828,7 @@ msgstr ""
 "(Calibration chapter)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1836,23 +1837,23 @@ msgstr ""
 "handleiding, hoofdstuk First steps, section Calibration flow."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Tijd"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Time-out"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Totaal"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Totaal fouten"
@@ -1873,13 +1874,13 @@ msgid "Tune"
 msgstr "Fijnafstemming"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Fil. uitwerpen"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Uitwerpen filament"
@@ -1923,7 +1924,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Wachten op afkoelen van tuit en bed"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1951,7 +1952,7 @@ msgid "Was filament unload successful?"
 msgstr "Is filament succes- vol verwijderd?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2022,7 +2023,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ-kalibratie mislukt. Raadpleeg de handleiding aub."
@@ -2048,7 +2049,7 @@ msgid "Y-correct:"
 msgstr "Y-correctie:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2069,7 +2070,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "U kunt de wizard altijd hervatten via Kalibratie -> Wizard."
 
@@ -2079,7 +2080,7 @@ msgid "Z-correct:"
 msgstr "Z-correctie:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z-test nr."
 
@@ -2109,12 +2110,12 @@ msgid "unknown"
 msgstr "onbekend"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "Status onbekend"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_no.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 eller eldre"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 eller nyere"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s nivå ventet"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Avbryt"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Alt korrekt"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Alt klart. God printing!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfabet"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Er venstre og høyre Z-vogn helt oppe?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Hjelp"
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Auto hjem"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Autostyrke"
@@ -124,27 +125,27 @@ msgid "Axis length"
 msgstr "Akselengde"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Tilbake"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Seng"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Sengen varmes"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Seng ferdig"
@@ -159,7 +160,7 @@ msgstr "Plankorrekt seng"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -173,7 +174,7 @@ msgid "Bed/Heater"
 msgstr "Seng/Varmer"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Beltestatus"
@@ -185,17 +186,17 @@ msgstr "Belte test"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Oppdaget Strømbrudd! Gjenoppta print?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Lys"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Lysstyrke"
@@ -206,7 +207,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibrer XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibrer Z"
 
@@ -220,7 +221,7 @@ msgstr ""
 "Deretter trykk."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibrer Z"
@@ -240,7 +241,7 @@ msgid "Calibrating home"
 msgstr "Kalibrerer hjem"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibrering"
 
@@ -260,7 +261,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Bytt filament"
@@ -276,13 +277,13 @@ msgid "Changed correctly?"
 msgstr "Byttet riktig?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Sjekker X aksen"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Sjekker Y aksen"
@@ -293,7 +294,7 @@ msgid "Checking Z axis"
 msgstr "Sjekker Z aksen"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Sjekker seng"
 
@@ -313,7 +314,7 @@ msgid "Checking hotend"
 msgstr "Sjekker hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Sjekker sensorer"
@@ -329,17 +330,17 @@ msgid "Color not correct"
 msgstr "Farge ikke riktig"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Community laget"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Fort."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Nedkjøling"
 
@@ -349,13 +350,13 @@ msgid "Copy selected language?"
 msgstr "Kopiere det valgte språket?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Krasj"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -363,7 +364,7 @@ msgid "Crash det."
 msgstr "Krasjdetek."
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Krasj oppdaget."
 
@@ -379,13 +380,13 @@ msgstr ""
 "Normal modus"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Kutt filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Kutter"
@@ -401,7 +402,7 @@ msgid "Date:"
 msgstr "Dato:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Svak"
 
@@ -412,7 +413,7 @@ msgstr "Frigjør motorer"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -436,7 +437,7 @@ msgid "E-correct:"
 msgstr "E-korreksjon:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -446,7 +447,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "ERROR: Filament- sensor svarer ikke. Vennligst sjekk koblingen."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Mat ut filament"
@@ -472,13 +473,13 @@ msgid "Endstops"
 msgstr "Endesensorer"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr "Ekstruder"
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Ekstrudervifte:"
@@ -489,14 +490,14 @@ msgid "Extruder info"
 msgstr "Ekstruderinfo"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autolast"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS aksjon"
@@ -527,33 +528,33 @@ msgid "False triggering"
 msgstr "Falskt utløsning"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Viftehastighet"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Viftetest"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Viftesjekk"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Tomt filament"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -562,12 +563,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament kommer ut og har riktig farge?"
@@ -578,7 +579,7 @@ msgid "Filament not loaded"
 msgstr "Fil. ikke lastet"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -595,13 +596,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Fil er ukomplett. Fortsette allikevel?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Avslutter bevegelser"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Førstelagskal."
@@ -622,7 +623,7 @@ msgid "Flow"
 msgstr "Flyt"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Fremre printvifte?"
@@ -651,13 +652,13 @@ msgstr ""
 "G-code sliced for en annen høyde. Vennligst slice igjen. Print avbrutt."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-code sliced for en annen printer. Fortsette?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -680,14 +681,14 @@ msgstr ""
 "avbrutt."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr ""
@@ -698,7 +699,7 @@ msgid "Heater/Thermistor"
 msgstr "Varmer/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Varmer opp"
@@ -709,13 +710,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Varme skrudd av pga. sikkerhet."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Oppvarming ferdig."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -725,7 +726,7 @@ msgstr ""
 "oppsett, hvor Z aksen blir kalibrert. Du er da klar til å printe."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -734,7 +735,7 @@ msgstr ""
 "gjennom oppsettprosessen?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -765,7 +766,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Infoskjerm"
 
@@ -787,30 +788,30 @@ msgid ""
 msgstr "Sett inn filamentet i ekstruderen og deretter trykk inn valghjulet."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Er filament lastet?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Er stålplaten på varmesenga?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iterasjon"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Siste print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -822,7 +823,7 @@ msgid "Left"
 msgstr "Venstre"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Venst. ekstr. vifte?"
@@ -833,12 +834,12 @@ msgid "Left side [μm]"
 msgstr "Vens. side[μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Nivå Lyst"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Nivå Dimmet"
 
@@ -848,7 +849,7 @@ msgid "Lin. correction"
 msgstr "Lin. korreksjon"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Juster Live-Z"
@@ -859,7 +860,7 @@ msgid "Load all"
 msgstr "Last alle"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -876,7 +877,7 @@ msgid "Loading color"
 msgstr "Laster farge"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -889,7 +890,7 @@ msgid "Loose pulley"
 msgstr "Løs talje"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Høyt"
@@ -905,7 +906,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S systemvare funnet på MK3 printer"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU Mod."
@@ -926,7 +927,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Gjenopptar..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "MMU feil"
@@ -937,7 +938,7 @@ msgid "MMU load failed"
 msgstr "MMU last feilet"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU lastefeil"
@@ -958,12 +959,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 tilkoblet"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Magnet komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -979,23 +980,23 @@ msgstr "Målt skjevhet"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Måler referansehøyde for kalibreringspunkt"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Plan-nett"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Sengeplanering"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1011,14 +1012,14 @@ msgid "Mode change in progress..."
 msgstr "Modus endres..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1044,7 +1045,7 @@ msgid "Move axis"
 msgstr "Beveg akse"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1058,7 +1059,7 @@ msgid "New firmware version available:"
 msgstr "Ny systemvare tilgjengelig:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1075,7 +1076,7 @@ msgid "No move."
 msgstr "Ingen bevegelse."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1084,7 +1085,7 @@ msgid "None"
 msgstr "Ingen"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1096,7 +1097,7 @@ msgid "Not connected"
 msgstr "Ikke tilkoblet"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Spinner ikke"
@@ -1118,7 +1119,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Fjern nå testprintet fra stålplaten."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1126,12 +1127,12 @@ msgid "Nozzle"
 msgstr "Dyse"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Dyse diam."
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1150,7 +1151,7 @@ msgstr ""
 "Gamle verdier funnet Standarinnstillinger for PID, motor etc. blir satt."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1162,12 +1163,12 @@ msgid "On"
 msgstr "På"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "En gang"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1193,7 +1194,7 @@ msgstr "PINDA varmes"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr ""
@@ -1204,7 +1205,7 @@ msgid "PINDA calibration failed"
 msgstr "PINDA kalibrering mislyktes"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1214,18 +1215,18 @@ msgstr ""
 "under Innstillinger -> PINDA kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pause printjobben"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1234,7 +1235,7 @@ msgstr ""
 "dysen tar papiret, skru umiddelbart av printeren."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1258,7 +1259,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Rengjør stålplaten og trykk valghjulet."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Rengjør dysen og trykk valghjulet."
 
@@ -1288,19 +1289,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Åpne taljedøren og fjern filamentet for hånd."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Plasser stålplaten på varmesenga."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Trykk valghjulet for å ta ut filamentet"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Trekk ut filamented med en gang"
 
@@ -1316,7 +1317,7 @@ msgstr "Vennligst fjern sendingsbeskyttelsen først."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Vennligst ta stålplaten av varmesenga."
 
@@ -1342,13 +1343,13 @@ msgstr "Vennligst oppdater."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Vennligst vent"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Strømfeil"
@@ -1359,12 +1360,12 @@ msgid "Preheat"
 msgstr "Forvarming"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Forvarm dysen!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Forvarmer dysen. Vennligst vent..."
@@ -1405,18 +1406,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Trykk valghjulet for å fortsette oppvarming."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Print avbrutt"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Printvifte:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Print fra SD-kort"
 
@@ -1436,7 +1437,7 @@ msgid "Printer IP Addr:"
 msgstr "Printer IP adr.:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1457,7 +1458,7 @@ msgstr ""
 "hva som er satt. Print avbrutt."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1482,7 +1483,7 @@ msgid "Rename"
 msgstr "Gi nytt navn"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Nullstill"
@@ -1493,13 +1494,13 @@ msgid "Reset XYZ calibr."
 msgstr "Nullstill XYZ kal."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Gjenoppta print"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Gjenopptar print"
 
@@ -1528,20 +1529,20 @@ msgid "Runouts"
 msgstr "F. tomt"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD-kort"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "STOPPET."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Søker etter kalibreringspunkt"
 
@@ -1558,18 +1559,18 @@ msgid ""
 msgstr "Velg filamenttype for Førstelags- kalibrering."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Velg filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Velg språk"
@@ -1605,7 +1606,7 @@ msgid "Selftest error!"
 msgstr "Selvtest feil!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Selvtest feilet"
@@ -1632,7 +1633,7 @@ msgid "Set temperature:"
 msgstr "Satt temperatur:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1646,7 +1647,7 @@ msgstr "Stor skjevhet"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Plate"
 
@@ -1669,7 +1670,7 @@ msgid "Show end stops"
 msgstr "Vis endesensorer"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Lydløs"
@@ -1692,19 +1693,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Problem møtt. Z aksjeplanering tvunget ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Sorter"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Sorter filer"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1716,7 +1717,7 @@ msgid "Speed"
 msgstr "Hastighet"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Spinner"
@@ -1732,25 +1733,25 @@ msgid "Statistics"
 msgstr "Statistikk"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Stille"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Stål plate"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Stopp printjobb"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1767,7 +1768,7 @@ msgid "Swapped"
 msgstr "Byttet"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1803,7 +1804,7 @@ msgstr ""
 "skal se ut."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1812,23 +1813,23 @@ msgstr ""
 "hovedmenyen og følg Veilederen."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Dato"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Tidsavbrudd"
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Totalt"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Feil totalt"
@@ -1849,13 +1850,13 @@ msgid "Tune"
 msgstr "Juster"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Last ut filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Laster ut filament"
@@ -1899,7 +1900,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Venter på dyse- og platenedkjøling"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1926,7 +1927,7 @@ msgid "Was filament unload successful?"
 msgstr "Ble filamentet lastet helt ut?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -1995,7 +1996,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ kal. mislyktes. Vennligst rådfør med håndboken."
@@ -2023,7 +2024,7 @@ msgid "Y-correct:"
 msgstr "Y-korreksjon:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2044,7 +2045,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Du kan alltid starte Veilederen fra Kalibrering -> Veileder."
 
@@ -2054,7 +2055,7 @@ msgid "Z-correct:"
 msgstr "Z-korreksjon:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z-sensor nr."
 
@@ -2084,12 +2085,12 @@ msgid "unknown"
 msgstr "ukjent"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "ukjent tilstand"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Forfriske"

lang/po/Firmware_pl.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 lub starszy"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 lub nowszy"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "Oczekiwano wersji %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Anuluj"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Wszystko OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Gotowe. Udanego drukowania!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfab"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Obydwa konce osi sa na szczycie?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Asyst."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Auto zerowanie"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Automatycz"
@@ -123,27 +124,27 @@ msgid "Axis length"
 msgstr "Dlugosc osi"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Wstecz"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Stol"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Grzanie stolu.."
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Stol OK"
@@ -158,7 +159,7 @@ msgstr "Korekta stolu"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -172,7 +173,7 @@ msgid "Bed/Heater"
 msgstr "Stol/Grzanie"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Stan paskow"
@@ -184,17 +185,17 @@ msgstr "Test paskow"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Wykryto zanik napiecia.Kontynowac?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Jasny"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Jasnosc"
@@ -205,7 +206,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibracja XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibruj Z"
 
@@ -219,7 +220,7 @@ msgstr ""
 "ogranicznikow. Nacisnij, by potwierdzic."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibruje Z"
@@ -239,7 +240,7 @@ msgid "Calibrating home"
 msgstr "Zerowanie osi"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibracja"
 
@@ -259,7 +260,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Wymiana filamentu"
@@ -275,13 +276,13 @@ msgid "Changed correctly?"
 msgstr "Wymiana ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Kontrola osi X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Kontrola osi Y"
@@ -292,7 +293,7 @@ msgid "Checking Z axis"
 msgstr "Kontrola osi Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Kontrola stolu"
 
@@ -312,7 +313,7 @@ msgid "Checking hotend"
 msgstr "Kontrola hotendu"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Kontrola czujnikow"
@@ -328,17 +329,17 @@ msgid "Color not correct"
 msgstr "Kolor zanieczysz."
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Od spolecznosci"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Kont."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Chlodzenie"
 
@@ -348,13 +349,13 @@ msgid "Copy selected language?"
 msgstr "Skopiowac wybrany jezyk?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Zderzen"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -362,7 +363,7 @@ msgid "Crash det."
 msgstr "Wykr.zderzen"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Zderzenie wykryte"
 
@@ -379,13 +380,13 @@ msgstr ""
 "trybie Normalnym"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Ciecie filamentu"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Nozyk"
@@ -401,7 +402,7 @@ msgid "Date:"
 msgstr "Data:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Sciemn"
 
@@ -412,7 +413,7 @@ msgstr "Wylacz silniki"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -436,7 +437,7 @@ msgid "E-correct:"
 msgstr "Korekcja-E:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "BLAD:"
 
@@ -446,7 +447,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "BLAD: Czujnik filamentu nie odpowiada, sprawdz polaczenie."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Wysun filament"
@@ -472,13 +473,13 @@ msgid "Endstops"
 msgstr "Krancowki"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr "Ekstruder"
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "WentHotend:"
@@ -489,14 +490,14 @@ msgid "Extruder info"
 msgstr "Ekstruder - info"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "Autolad. fil."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "Akcja FS"
@@ -527,33 +528,33 @@ msgid "False triggering"
 msgstr "Falszywy alarm"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Predkosc went."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test wentylatora"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Sprawd.went."
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Konc.filamentu"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -562,12 +563,12 @@ msgstr "Czuj. filam."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament wychodzi z dyszy,kolor jest ok?"
@@ -578,7 +579,7 @@ msgid "Filament not loaded"
 msgstr "Fil. nie zaladowany"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -595,13 +596,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Plik niekompletny. Kontynowac?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Konczenie druku"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Kal. 1. warstwy"
@@ -624,7 +625,7 @@ msgid "Flow"
 msgstr "Przeplyw"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Przedni went. druku?"
@@ -653,13 +654,13 @@ msgstr ""
 "G-code pociety na innym poziomie. Potnij model ponownie. Druk anulowany."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-code pociety dla innej drukarki. Kontynuowac?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -682,14 +683,14 @@ msgstr ""
 "G-code pociety dla nowszego firmware. Zaktualizuj firmware. Druk anulowany."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "Ustawienia HW"
@@ -700,7 +701,7 @@ msgid "Heater/Thermistor"
 msgstr "Grzalka/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Grzanie..."
@@ -711,13 +712,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Grzanie wylaczone przez wyl. czasowy"
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Grzanie zakonczone"
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -727,7 +728,7 @@ msgstr ""
 "krotka kalibracje osi Z, po ktorej mozesz rozpoczac drukowanie."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -736,7 +737,7 @@ msgstr ""
 "ustawieniem?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -767,7 +768,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Ekran informacyjny"
 
@@ -791,30 +792,30 @@ msgstr ""
 "pokretlo."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Filament jest zaladowany?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Czy plyta stal. jest na podgrzew. stole?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iteracja"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Ost. wydruk"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -826,7 +827,7 @@ msgid "Left"
 msgstr "Lewa"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Lewy went hotendu?"
@@ -837,12 +838,12 @@ msgid "Left side [μm]"
 msgstr "Lewo [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Poziom jasn."
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Poziom ciem."
 
@@ -852,7 +853,7 @@ msgid "Lin. correction"
 msgstr "Korekcja liniowa"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Ustaw. Live Z"
@@ -863,7 +864,7 @@ msgid "Load all"
 msgstr "Zalad. wszystkie"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -880,7 +881,7 @@ msgid "Loading color"
 msgstr "Czyszcz. koloru"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -893,7 +894,7 @@ msgid "Loose pulley"
 msgstr "Luzne kolo pasowe"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Glosny"
@@ -909,7 +910,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "Wykryto firmware MK3S w drukarce MK3"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "Tryb MMU"
@@ -930,7 +931,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Wznawianie..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Bledy MMU"
@@ -941,7 +942,7 @@ msgid "MMU load failed"
 msgstr "Blad ladowania MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "Bledy lad. MMU"
@@ -962,12 +963,12 @@ msgid "MMU2 connected"
 msgstr "MMU podlaczone"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Kor. magnesow"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -983,23 +984,23 @@ msgstr "Zmierz. skos"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Okreslam wysokosc odniesienia punktu kalibracyjnego"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Siatka"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Poziomowanie stolu"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1015,14 +1016,14 @@ msgid "Mode change in progress..."
 msgstr "Trwa zmiana trybu..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr "Silnik"
@@ -1048,7 +1049,7 @@ msgid "Move axis"
 msgstr "Ruch osi"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1062,7 +1063,7 @@ msgid "New firmware version available:"
 msgstr "Dostepna nowa wersja firmware:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1079,7 +1080,7 @@ msgid "No move."
 msgstr "Brak ruchu."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1088,7 +1089,7 @@ msgid "None"
 msgstr "Brak"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1100,7 +1101,7 @@ msgid "Not connected"
 msgstr "Nie podlaczono"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Nie kreci sie"
@@ -1122,7 +1123,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Teraz zdejmij wydruk testowy ze stolu."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1130,12 +1131,12 @@ msgid "Nozzle"
 msgstr "Dysza"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Sr. dyszy"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1155,7 +1156,7 @@ msgstr ""
 "itp."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1167,12 +1168,12 @@ msgid "On"
 msgstr "Wl"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "1-raz"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1198,7 +1199,7 @@ msgstr "Grzanie sondy PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "Kalib. PINDA"
@@ -1209,7 +1210,7 @@ msgid "PINDA calibration failed"
 msgstr "Kalibracja temperaturowa nieudana"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1219,18 +1220,18 @@ msgstr ""
 "-> Kalib. PINDA"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Wstrzym. wydruku"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1239,7 +1240,7 @@ msgstr ""
 "punktow. Jesli dysza zahaczy o papier, natychmiast wylacz drukarke."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1263,7 +1264,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Oczysc powierzchnie druku i nacisnij pokretlo."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Dla prawidlowej kalibracji nalezy oczyscic dysze. Potwierdz guzikiem."
 
@@ -1294,19 +1295,19 @@ msgstr ""
 "Prosze odciagnac dzwignie dociskowa ekstrudera i recznie usunac filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Prosze umiescic plyte stalowa na stole podgrzewanym."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Nacisnij pokretlo aby rozladowac filament"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Wyciagnij filament teraz"
 
@@ -1322,7 +1323,7 @@ msgstr "Najpierw usun zabezpieczenia transportowe"
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Prosze zdjac plyte stalowa z podgrzewanego stolu."
 
@@ -1348,13 +1349,13 @@ msgstr "Prosze zaktualizowac"
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Prosze czekac"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Zaniki zasil."
@@ -1365,12 +1366,12 @@ msgid "Preheat"
 msgstr "Grzanie"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Nagrzej dysze!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Nagrzewanie dyszy. Prosze czekac."
@@ -1411,18 +1412,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Wcisnij pokretlo aby wznowic podgrzewanie dyszy."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Druk przerwany"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "WentWydruk:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Druk z karty SD"
 
@@ -1442,7 +1443,7 @@ msgid "Printer IP Addr:"
 msgstr "Adr. IP drukarki:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1464,7 +1465,7 @@ msgstr ""
 "Srednica dyszy rozni sie od tej w G-code. Sprawdz ustawienia. Druk anulowany."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr "Port RPi"
 
@@ -1489,7 +1490,7 @@ msgid "Rename"
 msgstr "Zmien nazwe"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1500,13 +1501,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset kalibr. XYZ"
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Wznowic wydruk"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Wznawianie druku"
 
@@ -1535,20 +1536,20 @@ msgid "Runouts"
 msgstr "Konce f"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "Karta SD"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "ZATRZYMANO."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Szukam punktu kalib. na stole"
 
@@ -1567,18 +1568,18 @@ msgstr ""
 "ekranowym."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Wybierz ekstruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Wybierz filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Wybor jezyka"
@@ -1614,7 +1615,7 @@ msgid "Selftest error!"
 msgstr "Blad selftest!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Selftest nieudany"
@@ -1642,7 +1643,7 @@ msgid "Set temperature:"
 msgstr "Ustaw temperature:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1656,7 +1657,7 @@ msgstr "Znaczny skos"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Plyta"
 
@@ -1679,7 +1680,7 @@ msgid "Show end stops"
 msgstr "Pokaz krancowki"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Cichy"
@@ -1704,19 +1705,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Wykryto problem, wymuszono poziomowanie osi Z."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Sort."
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Sortowanie plikow"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1728,7 +1729,7 @@ msgid "Speed"
 msgstr "Predkosc"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Kreci sie"
@@ -1745,25 +1746,25 @@ msgid "Statistics"
 msgstr "Statystyki"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Cichy"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Plyty stalowe"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Przerwanie druku"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1780,7 +1781,7 @@ msgid "Swapped"
 msgstr "Zamieniono"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1816,7 +1817,7 @@ msgstr ""
 "Kalibracja)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1825,23 +1826,23 @@ msgstr ""
 "Kroki, sekcja Kalibracja."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Czas"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr "Wyl. czas."
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Suma"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Suma bledow"
@@ -1862,13 +1863,13 @@ msgid "Tune"
 msgstr "Strojenie"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Rozladowanie fil"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Rozladowuje filament"
@@ -1912,7 +1913,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Oczekiwanie na wychlodzenie dyszy i stolu"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1939,7 +1940,7 @@ msgid "Was filament unload successful?"
 msgstr "Rozladowanie fil. ok?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2010,7 +2011,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Kalibracja XYZ nieudana. Sprawdz przyczyny i rozwiazania w instrukcji."
@@ -2038,7 +2039,7 @@ msgid "Y-correct:"
 msgstr "Korekcja-Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2059,7 +2060,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Zawsze mozesz uruchomic Asystenta ponownie przez Kalibracja -> Asystent."
@@ -2070,7 +2071,7 @@ msgid "Z-correct:"
 msgstr "Korekcja-Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Ilosc Pomiarow"
 
@@ -2100,12 +2101,12 @@ msgid "unknown"
 msgstr "nieznane"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "Stan nieznany"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Odswiezac"

lang/po/Firmware_ro.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 / mai vechi"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 / mai nou"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "nivel %s asteptat"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Anuleaza"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Totul OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Totul este OK. Distractie placuta!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfabet"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Este axa Z aliniata sus?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Put. auto"
@@ -125,27 +126,27 @@ msgid "Axis length"
 msgstr "Lungime axa"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Inapoi"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Pat"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Patul se incalzeste"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Pat incalzit"
@@ -160,7 +161,7 @@ msgstr "Nivelare pat"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -174,7 +175,7 @@ msgid "Bed/Heater"
 msgstr "Incalzitor/Pat"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Status curele"
@@ -186,17 +187,17 @@ msgstr "Test curele"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Pana de curent. Continuati printul?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Maxim"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Luminozitate ecran"
@@ -207,7 +208,7 @@ msgid "Calibrate XYZ"
 msgstr "Calibrare XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Calibrare Z"
 
@@ -221,7 +222,7 @@ msgstr ""
 "butonul cand este gata."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Calibrare Z"
@@ -241,7 +242,7 @@ msgid "Calibrating home"
 msgstr "Calibrare home"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Calibrare"
 
@@ -261,7 +262,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Schimba filamentul"
@@ -277,13 +278,13 @@ msgid "Changed correctly?"
 msgstr "Schimbat corect?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Verificare axa X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Verificare axa Y"
@@ -294,7 +295,7 @@ msgid "Checking Z axis"
 msgstr "Verificare axa Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Verificare pat"
 
@@ -314,7 +315,7 @@ msgid "Checking hotend"
 msgstr "Verificare hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Verificare senzori"
@@ -330,17 +331,17 @@ msgid "Color not correct"
 msgstr "Culoare gresita"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Comunitate"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Racire"
 
@@ -350,13 +351,13 @@ msgid "Copy selected language?"
 msgstr "Copiaza limba selectata?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Coliz."
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -364,7 +365,7 @@ msgid "Crash det."
 msgstr "Det.coliziune"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Coliziune detectata."
 
@@ -380,13 +381,13 @@ msgstr ""
 "doar in modul normal"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Taie filamentul"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr ""
@@ -402,7 +403,7 @@ msgid "Date:"
 msgstr "Data:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Minim"
 
@@ -413,7 +414,7 @@ msgstr "Oprire steppere"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -437,7 +438,7 @@ msgid "E-correct:"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "EROARE:"
 
@@ -447,7 +448,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "EROARE: Senzorul de filament nu merge, verificati conexiunea."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Scoate filament"
@@ -473,13 +474,13 @@ msgid "Endstops"
 msgstr "Endstop-uri"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Vent. extruder:"
@@ -490,14 +491,14 @@ msgid "Extruder info"
 msgstr "Info. extruder"
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "Autoload fil."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "Actiune FS"
@@ -528,33 +529,33 @@ msgid "False triggering"
 msgstr "nu detect. schimbare"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Viteza vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test ventilator"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Verif. vent."
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Epuizari fil."
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -563,12 +564,12 @@ msgstr "Senzor fil."
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Fil. curge si are culoarea corecta?"
@@ -579,7 +580,7 @@ msgid "Filament not loaded"
 msgstr "Fil. nu e incarcat"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -596,13 +597,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Fisier incomplet. Continua oricum?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Finalizare miscari"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Cal. first layer"
@@ -625,7 +626,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Vent. print?"
@@ -655,13 +656,13 @@ msgstr ""
 "anulat."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-code pregatit pentru un alt tip de printer. Continuati?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -685,14 +686,14 @@ msgstr ""
 "Print anulat."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "Setup HW"
@@ -703,7 +704,7 @@ msgid "Heater/Thermistor"
 msgstr "Incalzitor/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Incalzire"
@@ -714,13 +715,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Incalzirea dezactivata de timer-ul de siguranta"
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Incalzirea gata."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -730,7 +731,7 @@ msgstr ""
 "proces de setup in care axa Z va fi calibrata. Apoi, vei fi gata sa printezi."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -739,7 +740,7 @@ msgstr ""
 "automate si calibrarile?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -770,7 +771,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Ecran informatii"
 
@@ -792,30 +793,30 @@ msgid ""
 msgstr "Infige filamentul (nu-l incarca) in extruder si apasa butonul."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Este filamentul incarcat?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Este suprafata de print pe pat?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Iteratie"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Ultimul print"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -827,7 +828,7 @@ msgid "Left"
 msgstr "Stanga"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Vent. hotend?"
@@ -838,12 +839,12 @@ msgid "Left side [μm]"
 msgstr "Stanga [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Lum. maxim"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Lum. minim"
 
@@ -853,7 +854,7 @@ msgid "Lin. correction"
 msgstr "Corectie lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Reglare Z live"
@@ -864,7 +865,7 @@ msgid "Load all"
 msgstr "Incarcati toate"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -881,7 +882,7 @@ msgid "Loading color"
 msgstr "Incarcare culoare"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -894,7 +895,7 @@ msgid "Loose pulley"
 msgstr "Fulie slabita"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Tare"
@@ -910,7 +911,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "Firmware MK3S detectat pe imprimanta MK3"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "Mod MMU"
@@ -931,7 +932,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Reluare..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Erori MMU"
@@ -942,7 +943,7 @@ msgid "MMU load failed"
 msgstr "Eroare incarcare MMU"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "Err. incarc MMU"
@@ -963,12 +964,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 conectat"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Comp. magneti"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -984,23 +985,23 @@ msgstr "Distorsiune"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Masurare distanta de referinta pentru punctul de calib."
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Calibrare mesh"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1016,14 +1017,14 @@ msgid "Mode change in progress..."
 msgstr "Schimbare mod in progres..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1049,7 +1050,7 @@ msgid "Move axis"
 msgstr "Miscare axe"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1063,7 +1064,7 @@ msgid "New firmware version available:"
 msgstr "Vers. de firmware noua disponibila:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1080,7 +1081,7 @@ msgid "No move."
 msgstr "Fara miscare."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1089,7 +1090,7 @@ msgid "None"
 msgstr "N/A"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1101,7 +1102,7 @@ msgid "Not connected"
 msgstr "Nu este conectat"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Nu se roteste"
@@ -1123,7 +1124,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Acum inlaturati printul de test de pe suprafata de print."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1131,12 +1132,12 @@ msgid "Nozzle"
 msgstr "Varf"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Diam. varf"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1154,7 +1155,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Setari vechi detectate. PID, Esteps etc. de baza vor fi setate."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1166,12 +1167,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "O data"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1197,7 +1198,7 @@ msgstr "Incalzire PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "Cal. PINDA"
@@ -1208,7 +1209,7 @@ msgid "PINDA calibration failed"
 msgstr "Calibrarea temperaturii a esuat"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1218,18 +1219,18 @@ msgstr ""
 "meniul Setari->Cal. PINDA"
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pauza print"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1238,7 +1239,7 @@ msgstr ""
 "Daca varful prinde hartia, opriti imediat imprimanta."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1262,7 +1263,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Curatati patul si apoi apasati butonul pentru a continua."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Curatati varful pentru calibrare. Apasati butonul cand terminati."
 
@@ -1294,19 +1295,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Deschideti idler-ul si scoateti filamentul manual."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Asezati suprafata de print pe pat."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Apasati butonul pentru a scoate filamentul."
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Va rugam scoateti filamentul imediat"
 
@@ -1322,7 +1323,7 @@ msgstr "Va rugam scoateti protectiile de transport mai intai."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Va rugam indepartati suprafata de print de pe pat."
 
@@ -1348,13 +1349,13 @@ msgstr "Va rugam actualizati"
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Va rog asteptati"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Err. alimentare"
@@ -1365,12 +1366,12 @@ msgid "Preheat"
 msgstr "Preincalzire"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Preincalziti varful!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Preincalzire extruder. Asteptati, va rugam."
@@ -1411,18 +1412,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Apasati butonul pentru a restabili temperatura extruder-ului."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Print anulat"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Vent. print:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Printare de pe SD"
 
@@ -1442,7 +1443,7 @@ msgid "Printer IP Addr:"
 msgstr "IP imprimanta:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1465,7 +1466,7 @@ msgstr ""
 "valoarea in setari. Print anulat."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr "Port RPi"
 
@@ -1491,7 +1492,7 @@ msgid "Rename"
 msgstr "Redenumeste"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Reset."
@@ -1502,13 +1503,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset. calibr. XYZ"
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Continua print"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Reluare print..."
 
@@ -1537,20 +1538,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "Card SD"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "OPRIT."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Se cauta punctele de calibrare"
 
@@ -1569,18 +1570,18 @@ msgstr ""
 "ecran."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Alege extruderul:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Select. filamentul:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Selectati limba"
@@ -1617,7 +1618,7 @@ msgid "Selftest error!"
 msgstr "Err. test. automata!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Autotestare esuata"
@@ -1644,7 +1645,7 @@ msgid "Set temperature:"
 msgstr "Setati temperatura:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1658,7 +1659,7 @@ msgstr "Dist. severa"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Suprafata"
 
@@ -1681,7 +1682,7 @@ msgid "Show end stops"
 msgstr "Stare endstop-uri"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Silent."
@@ -1706,19 +1707,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "A fost intalnita o problema, calibrarea Z a fost initiata..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Sortare"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Sortare fisiere..."
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1730,7 +1731,7 @@ msgid "Speed"
 msgstr "Viteza"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Se roteste"
@@ -1747,25 +1748,25 @@ msgid "Statistics"
 msgstr "Statistici"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Silent."
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Suprafete print"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Oprire print"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1782,7 +1783,7 @@ msgid "Swapped"
 msgstr "inversate"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1817,7 +1818,7 @@ msgstr ""
 "inaltimea optima. Folositi pozele din handbook (capitolul Calibration)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1826,23 +1827,23 @@ msgstr ""
 "First steps, sectiunea Calibration flow."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Data"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Total erori"
@@ -1863,13 +1864,13 @@ msgid "Tune"
 msgstr "Optiuni"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Descarca filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Scoatere filament"
@@ -1913,7 +1914,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Se ateapta racirea extruder-ului si a patului"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1940,7 +1941,7 @@ msgid "Was filament unload successful?"
 msgstr "Filamentul a fost scos cu succes?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2015,7 +2016,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Calibrarea XYZ a esuat. Va rugam consultati manualul."
@@ -2043,7 +2044,7 @@ msgid "Y-correct:"
 msgstr "Corect. Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2064,7 +2065,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Puteti oricand sa reluati Wizard-ul din Calibrare -> Wizard."
 
@@ -2074,7 +2075,7 @@ msgid "Z-correct:"
 msgstr "Corect. Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Nr. Z-probe"
 
@@ -2104,12 +2105,12 @@ msgid "unknown"
 msgstr "necunoscut"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "vers. necunoscuta"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Reimprospata"

lang/po/Firmware_sk.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 a starsie"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 a novsie"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "Ocakavana verzia %s"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Zrusit"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Vsetko OK"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Vsetko je hotove!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Abeceda"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Dosli oba Z voziky k hornemu dorazu?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr "Asist."
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Automat."
@@ -124,27 +125,27 @@ msgid "Axis length"
 msgstr "Dlzka osi"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Spat"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Podlozka"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Zahrievanie podlozky"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Podlozka OK."
@@ -159,7 +160,7 @@ msgstr "Korekcie podlozky"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -172,7 +173,7 @@ msgid "Bed/Heater"
 msgstr "Podlozka/Zohrievanie"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Stav remena"
@@ -184,17 +185,17 @@ msgstr "Test remena"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Nastal vypadok prudu. Obnovit tlac?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Jasne"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Podsvietenie"
@@ -205,7 +206,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibracia XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibrovat Z"
 
@@ -219,7 +220,7 @@ msgstr ""
 "tlacidlom."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibrujem Z"
@@ -239,7 +240,7 @@ msgid "Calibrating home"
 msgstr "Kalibr. vychodziu p."
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibracia"
 
@@ -259,7 +260,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Vymenit filament"
@@ -275,13 +276,13 @@ msgid "Changed correctly?"
 msgstr "Vymena ok?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Kontrola osi X"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Kontrola osi Y"
@@ -292,7 +293,7 @@ msgid "Checking Z axis"
 msgstr "Kontrola osi Z"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Kontrola podlozky"
 
@@ -312,7 +313,7 @@ msgid "Checking hotend"
 msgstr "Kontrola hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Kontrola senzorov"
@@ -328,17 +329,17 @@ msgid "Color not correct"
 msgstr "Nespravna farba"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Komunitny prekl."
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Pokr."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Schladit"
 
@@ -348,13 +349,13 @@ msgid "Copy selected language?"
 msgstr "Kopirovat vybrany jazyk?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Naraz"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -362,7 +363,7 @@ msgid "Crash det."
 msgstr "Det. narazu"
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Zisteny naraz."
 
@@ -378,13 +379,13 @@ msgstr ""
 "Normal mode"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Odstrihnut"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Strihanie"
@@ -400,7 +401,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr "Temny"
 
@@ -411,7 +412,7 @@ msgstr "Vypnut motory"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -435,7 +436,7 @@ msgid "E-correct:"
 msgstr "Korekcia E:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "CHYBA:"
 
@@ -445,7 +446,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "CHYBA: Filament senzor nereaguje, skontrolujte prosim zapojenie."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Vysunut fil."
@@ -471,13 +472,13 @@ msgid "Endstops"
 msgstr "Konc. spinace"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Lavy vent.:"
@@ -488,14 +489,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autozav."
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS reakcia"
@@ -526,33 +527,33 @@ msgid "False triggering"
 msgstr "Falosne spustenie"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Rychlost vent."
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Test ventilatora"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Kontr. vent."
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Vypadky filam."
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -561,12 +562,12 @@ msgstr "Fil. senzor"
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Filament vytlaceny a spravnej farby?"
@@ -577,7 +578,7 @@ msgid "Filament not loaded"
 msgstr "Filament nezavedeny"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -594,13 +595,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Subor nekompletny. Pokracovat?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Dokoncovanie pohybu"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Kal. prvej vrstvy"
@@ -623,7 +624,7 @@ msgid "Flow"
 msgstr "Prietok"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Predny tlacovy vent?"
@@ -652,13 +653,13 @@ msgstr ""
 "G-code pripraveny pre inu verziu. Vygenerujte G-code znova. Tlac zrusena."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-code je pripraveny pre iny typ tlaciarne. Pokracovat?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -682,14 +683,14 @@ msgstr ""
 "zrusena."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW nastavenie"
@@ -700,7 +701,7 @@ msgid "Heater/Thermistor"
 msgstr "Zohr./Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Zahrievanie"
@@ -711,13 +712,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Zohrievanie prerusene bezpecnostnym casovacom."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Zahrievanie OK."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -727,7 +728,7 @@ msgstr ""
 "nastavenia, v ktorom skalibrujem os Z. Potom budete moct zacat tlacit."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -736,7 +737,7 @@ msgstr ""
 "previedla kalibracnym procesom?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -767,7 +768,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Informacie"
 
@@ -789,30 +790,30 @@ msgid ""
 msgstr "Vlozte filament (nezavadzajte) do extruderu a stlacte tlacidlo"
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Je filament zavedeny?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Je platna na podlozke?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr "Opakovanie"
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Posledna tlac"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -824,7 +825,7 @@ msgid "Left"
 msgstr "Vlavo"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Lavy vent na tryske?"
@@ -835,12 +836,12 @@ msgid "Left side [μm]"
 msgstr "Vlavo [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Normalne"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Stlmene"
 
@@ -850,7 +851,7 @@ msgid "Lin. correction"
 msgstr "Korekcia lin."
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Doladenie osi Z"
@@ -861,7 +862,7 @@ msgid "Load all"
 msgstr "Zaviest vsetko"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -878,7 +879,7 @@ msgid "Loading color"
 msgstr "Cistenie farby"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -891,7 +892,7 @@ msgid "Loose pulley"
 msgstr "Uvolnena remenica"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Hlasny"
@@ -907,7 +908,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S firmware na MK3 tlaciarni"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU mod"
@@ -928,7 +929,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Pokracujem..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "Zlyhanie MMU"
@@ -939,7 +940,7 @@ msgid "MMU load failed"
 msgstr "MMU zaved. zlyhalo"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU zlyhalo"
@@ -960,12 +961,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 pripojene"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Komp. magnetu"
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -981,23 +982,23 @@ msgstr "Merane skos."
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Meriam referencnu vysku kalibracneho bodu"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1013,14 +1014,14 @@ msgid "Mode change in progress..."
 msgstr "Prebieha zmena modu..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1046,7 +1047,7 @@ msgid "Move axis"
 msgstr "Posunut os"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1060,7 +1061,7 @@ msgid "New firmware version available:"
 msgstr "Vysla nova verzia firmware:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1077,7 +1078,7 @@ msgid "No move."
 msgstr "Bez pohybu."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1086,7 +1087,7 @@ msgid "None"
 msgstr "Ziadne"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1098,7 +1099,7 @@ msgid "Not connected"
 msgstr "Nezapojene"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Netoci sa"
@@ -1120,7 +1121,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Teraz odstrante testovaci vytlacok z platne."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1128,12 +1129,12 @@ msgid "Nozzle"
 msgstr "Tryska"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Tryska"
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1151,7 +1152,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr "Neplatne hodnoty nastavenia. Bude pouzite predvolene PID, Esteps atd."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1163,12 +1164,12 @@ msgid "On"
 msgstr "Zap"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "Raz"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1194,7 +1195,7 @@ msgstr "Nahrievanie PINDA"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA kal."
@@ -1205,7 +1206,7 @@ msgid "PINDA calibration failed"
 msgstr "Teplotna kalibracia zlyhala"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1215,18 +1216,18 @@ msgstr ""
 "menu Nastavenie->PINDA kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Pauza"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pozastavit tlac"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1236,7 +1237,7 @@ msgstr ""
 "tlacidlom X."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1260,7 +1261,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Prosim ocistite podlozku a stlacte tlacidlo."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 "Pre uspesnu kalibraciu ocistite prosim tlacovu trysku. Potvrdte tlacidlom."
@@ -1292,19 +1293,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Prosim otvorte idler a manualne odstrante filament."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Umiestnite prosim platnu na podlozku"
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Pre vysunutie filamentu stlacte prosim tlacidlo"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Prosim vyberte urychlene filament"
 
@@ -1320,7 +1321,7 @@ msgstr "Najskor prosim odstrante prevozne suciastky."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Odstrante prosim platnu z pozdlozky."
 
@@ -1346,13 +1347,13 @@ msgstr "Aktualizujte prosim."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Cakajte prosim"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Vypadky prudu"
@@ -1363,12 +1364,12 @@ msgid "Preheat"
 msgstr "Predohrev"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Predhrejte trysku!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Predhrev trysky. Prosim cakajte."
@@ -1409,18 +1410,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Pre pokracovanie nahrievania trysky stlacte tlacidlo."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Tlac prerusena"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Tlacovy vent.:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Tlac z SD"
 
@@ -1440,7 +1441,7 @@ msgid "Printer IP Addr:"
 msgstr "IP adr. tlaciarne:"
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1463,7 +1464,7 @@ msgstr ""
 "Tlac zrusena."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1488,7 +1489,7 @@ msgid "Rename"
 msgstr "Premenovat"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1499,13 +1500,13 @@ msgid "Reset XYZ calibr."
 msgstr "Reset XYZ kalibr."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Pokracovat"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Obnovenie tlace"
 
@@ -1534,20 +1535,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD karta"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "ZASTAVENE."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Hladam kalibracny bod podlozky"
 
@@ -1564,18 +1565,18 @@ msgid ""
 msgstr "Zvolte filament pre kalibraciu prvej vrstvy z nasledujuceho menu"
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Vyberte extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Zvolte filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Vyber jazyka"
@@ -1611,7 +1612,7 @@ msgid "Selftest error!"
 msgstr "Chyba Selftestu!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Selftest zlyhal"
@@ -1637,7 +1638,7 @@ msgid "Set temperature:"
 msgstr "Nastavte teplotu:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1651,7 +1652,7 @@ msgstr "Tazke skos."
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Platna"
 
@@ -1674,7 +1675,7 @@ msgid "Show end stops"
 msgstr "Stav konc. spin."
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Tichy"
@@ -1699,19 +1700,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Vyskytol sa problem, zarovnam os Z ..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Triedit"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Triedenie suborov"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1723,7 +1724,7 @@ msgid "Speed"
 msgstr "Rychlost"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Toci sa"
@@ -1739,25 +1740,25 @@ msgid "Statistics"
 msgstr "Statistika"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Tichy"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Platne"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Zastavit tlac"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1774,7 +1775,7 @@ msgid "Swapped"
 msgstr "Prehodene"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1809,7 +1810,7 @@ msgstr ""
 "vysku. Postupujte podla obrazku v handbooku (kapitola Kalibracia)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1818,23 +1819,23 @@ msgstr ""
 "Zaciname, sekcia Postup kalibracie."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Cas"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr "Celkom"
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Celkom zlyhani"
@@ -1855,13 +1856,13 @@ msgid "Tune"
 msgstr "Ladit"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Vybrat filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Vysuvam filament"
@@ -1905,7 +1906,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Cakanie na schladenie trysky a podlozky."
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1932,7 +1933,7 @@ msgid "Was filament unload successful?"
 msgstr "Bolo vysunutie filamentu uspesne?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2004,7 +2005,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "Kalibracia XYZ zlyhala. Nahliadnite do manualu."
@@ -2031,7 +2032,7 @@ msgid "Y-correct:"
 msgstr "Korekcia Y:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2052,7 +2053,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 "Sprievodcu mozete kedykolvek znovu spustit z menu Kalibracia -> Sprievodca"
@@ -2063,7 +2064,7 @@ msgid "Z-correct:"
 msgstr "Korekcia Z:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Pocet merani Z"
 
@@ -2093,12 +2094,12 @@ msgid "unknown"
 msgstr "neznamy"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "neznamy stav"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Obnovit"

lang/po/Firmware_sl.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr ""
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr ""
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr ""
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ""
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr ""
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr ""
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr ""
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr ""
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr ""
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr ""
@@ -122,27 +123,27 @@ msgid "Axis length"
 msgstr ""
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr ""
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr ""
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr ""
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr ""
@@ -157,7 +158,7 @@ msgstr ""
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -169,7 +170,7 @@ msgid "Bed/Heater"
 msgstr ""
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr ""
@@ -181,17 +182,17 @@ msgstr ""
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr ""
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr ""
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr ""
@@ -202,7 +203,7 @@ msgid "Calibrate XYZ"
 msgstr ""
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr ""
 
@@ -214,7 +215,7 @@ msgid ""
 msgstr ""
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr ""
@@ -232,7 +233,7 @@ msgid "Calibrating home"
 msgstr ""
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr ""
 
@@ -252,7 +253,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr ""
@@ -268,13 +269,13 @@ msgid "Changed correctly?"
 msgstr ""
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr ""
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr ""
@@ -285,7 +286,7 @@ msgid "Checking Z axis"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr ""
 
@@ -305,7 +306,7 @@ msgid "Checking hotend"
 msgstr ""
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr ""
@@ -321,17 +322,17 @@ msgid "Color not correct"
 msgstr ""
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr ""
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr ""
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr ""
 
@@ -341,13 +342,13 @@ msgid "Copy selected language?"
 msgstr ""
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr ""
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -355,7 +356,7 @@ msgid "Crash det."
 msgstr ""
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr ""
 
@@ -368,13 +369,13 @@ msgid ""
 msgstr ""
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr ""
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr ""
@@ -390,7 +391,7 @@ msgid "Date:"
 msgstr ""
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -401,7 +402,7 @@ msgstr ""
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -421,7 +422,7 @@ msgid "E-correct:"
 msgstr ""
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr ""
 
@@ -431,7 +432,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr ""
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr ""
@@ -457,13 +458,13 @@ msgid "Endstops"
 msgstr ""
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr ""
@@ -474,14 +475,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr ""
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr ""
@@ -512,33 +513,33 @@ msgid "False triggering"
 msgstr ""
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr ""
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr ""
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr ""
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -547,12 +548,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr ""
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr ""
@@ -563,7 +564,7 @@ msgid "Filament not loaded"
 msgstr ""
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -580,13 +581,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr ""
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr ""
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr ""
@@ -607,7 +608,7 @@ msgid "Flow"
 msgstr ""
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr ""
@@ -635,13 +636,13 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr ""
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -661,14 +662,14 @@ msgid ""
 msgstr ""
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr ""
@@ -679,7 +680,7 @@ msgid "Heater/Thermistor"
 msgstr ""
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr ""
@@ -690,13 +691,13 @@ msgid "Heating disabled by safety timer."
 msgstr ""
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr ""
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -704,7 +705,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -713,7 +714,7 @@ msgstr ""
 "skozi postopek nastavitve?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -742,7 +743,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr ""
 
@@ -764,30 +765,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr ""
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr ""
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr ""
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -799,7 +800,7 @@ msgid "Left"
 msgstr ""
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr ""
@@ -810,12 +811,12 @@ msgid "Left side [μm]"
 msgstr ""
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr ""
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr ""
 
@@ -825,7 +826,7 @@ msgid "Lin. correction"
 msgstr ""
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr ""
@@ -836,7 +837,7 @@ msgid "Load all"
 msgstr ""
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -853,7 +854,7 @@ msgid "Loading color"
 msgstr ""
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -866,7 +867,7 @@ msgid "Loose pulley"
 msgstr ""
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr ""
@@ -882,7 +883,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr ""
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr ""
@@ -903,7 +904,7 @@ msgid "MMU OK. Resuming..."
 msgstr ""
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr ""
@@ -914,7 +915,7 @@ msgid "MMU load failed"
 msgstr ""
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr ""
@@ -935,12 +936,12 @@ msgid "MMU2 connected"
 msgstr ""
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr ""
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -956,23 +957,23 @@ msgstr ""
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr ""
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr ""
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr ""
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -988,14 +989,14 @@ msgid "Mode change in progress..."
 msgstr ""
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr ""
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1021,7 +1022,7 @@ msgid "Move axis"
 msgstr ""
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1035,7 +1036,7 @@ msgid "New firmware version available:"
 msgstr ""
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1052,7 +1053,7 @@ msgid "No move."
 msgstr ""
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1061,7 +1062,7 @@ msgid "None"
 msgstr ""
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1073,7 +1074,7 @@ msgid "Not connected"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr ""
@@ -1095,7 +1096,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr ""
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1103,12 +1104,12 @@ msgid "Nozzle"
 msgstr ""
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr ""
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1126,7 +1127,7 @@ msgid "Old settings found. Default PID, Esteps etc. will be set."
 msgstr ""
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1138,12 +1139,12 @@ msgid "On"
 msgstr ""
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr ""
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1169,7 +1170,7 @@ msgstr ""
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr ""
@@ -1180,7 +1181,7 @@ msgid "PINDA calibration failed"
 msgstr ""
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1188,25 +1189,25 @@ msgid ""
 msgstr ""
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr ""
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr ""
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
 msgstr ""
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1228,7 +1229,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr ""
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr ""
 
@@ -1256,19 +1257,19 @@ msgid "Please open idler and remove filament manually."
 msgstr ""
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr ""
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr ""
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr ""
 
@@ -1284,7 +1285,7 @@ msgstr ""
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr ""
 
@@ -1310,13 +1311,13 @@ msgstr ""
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr ""
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr ""
@@ -1327,12 +1328,12 @@ msgid "Preheat"
 msgstr ""
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr ""
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr ""
@@ -1373,18 +1374,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr ""
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr ""
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr ""
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr ""
 
@@ -1404,7 +1405,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1423,7 +1424,7 @@ msgid ""
 msgstr ""
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1448,7 +1449,7 @@ msgid "Rename"
 msgstr ""
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr ""
@@ -1459,13 +1460,13 @@ msgid "Reset XYZ calibr."
 msgstr ""
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr ""
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr ""
 
@@ -1492,20 +1493,20 @@ msgid "Runouts"
 msgstr ""
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr ""
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr ""
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr ""
 
@@ -1522,18 +1523,18 @@ msgid ""
 msgstr ""
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr ""
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr ""
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr ""
@@ -1569,7 +1570,7 @@ msgid "Selftest error!"
 msgstr ""
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr ""
@@ -1595,7 +1596,7 @@ msgid "Set temperature:"
 msgstr ""
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1609,7 +1610,7 @@ msgstr ""
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr ""
 
@@ -1628,7 +1629,7 @@ msgid "Show end stops"
 msgstr ""
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr ""
@@ -1651,19 +1652,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr ""
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr ""
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr ""
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1675,7 +1676,7 @@ msgid "Speed"
 msgstr ""
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr ""
@@ -1691,25 +1692,25 @@ msgid "Statistics"
 msgstr ""
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr ""
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr ""
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr ""
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1726,7 +1727,7 @@ msgid "Swapped"
 msgstr ""
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1759,30 +1760,30 @@ msgid ""
 msgstr ""
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
 msgstr ""
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr ""
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr ""
@@ -1803,13 +1804,13 @@ msgid "Tune"
 msgstr ""
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr ""
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr ""
@@ -1849,7 +1850,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr ""
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1876,7 +1877,7 @@ msgid "Was filament unload successful?"
 msgstr ""
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -1945,7 +1946,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr ""
@@ -1971,7 +1972,7 @@ msgid "Y-correct:"
 msgstr ""
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -1992,7 +1993,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr ""
 
@@ -2002,7 +2003,7 @@ msgid "Z-correct:"
 msgstr ""
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr ""
 
@@ -2032,12 +2033,12 @@ msgid "unknown"
 msgstr ""
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr ""
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr ""

lang/po/Firmware_sv.po

@@ -16,12 +16,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. MSG_IR_03_OR_OLDER c=18
-#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:160
+#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.cpp:161
 msgid " 0.3 or older"
 msgstr " 0.3 el äldre"
 
 #. MSG_IR_04_OR_NEWER c=18
-#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:159
+#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.cpp:160
 msgid " 0.4 or newer"
 msgstr " 0.4 el nyare"
 
@@ -31,7 +31,7 @@ msgid "%s level expected"
 msgstr "%s nivå förväntad"
 
 #. MSG_CANCEL c=10
-#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1976
+#: ../../Firmware/messages.cpp:18 ../../Firmware/ultralcd.cpp:1976
 #: ../../Firmware/ultralcd.cpp:3843
 msgid ">Cancel"
 msgstr ">Avbryt"
@@ -48,17 +48,18 @@ msgid "All correct"
 msgstr "Allt korrekt"
 
 #. MSG_WIZARD_DONE c=20 r=3
-#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4179
+#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:4179
 #: ../../Firmware/ultralcd.cpp:4188
 msgid "All is done. Happy printing!"
 msgstr "Allt är klart. God utskrift!"
 
 #. MSG_SORT_ALPHA c=8
-#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4412
+#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4412
 msgid "Alphabet"
 msgstr "Alfabet"
 
-#: ../../Firmware/ultralcd.cpp:4316
+#. MSG_ALWAYS c=6
+#: ../../Firmware/messages.cpp:8 ../../Firmware/ultralcd.cpp:4316
 msgid "Always"
 msgstr ""
 
@@ -73,23 +74,23 @@ msgid "Are left and right Z~carriages all up?"
 msgstr "Är båda Z-vagnarna helt uppe?"
 
 #. MSG_SOUND_BLIND c=7
-#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4467
+#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:4467
 msgid "Assist"
 msgstr ""
 
 #. MSG_AUTO c=6
-#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:157 ../../Firmware/ultralcd.cpp:5872
 msgid "Auto"
 msgstr ""
 
 #. MSG_AUTO_HOME c=18
-#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:8
+#: ../../Firmware/Marlin_main.cpp:3268 ../../Firmware/messages.cpp:9
 #: ../../Firmware/ultralcd.cpp:4908
 msgid "Auto home"
 msgstr "Auto hem"
 
 #. MSG_AUTO_POWER c=10
-#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4372
+#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:5787
 msgid "Auto power"
 msgstr "Auto kraft"
@@ -123,27 +124,27 @@ msgid "Axis length"
 msgstr "Axellängd"
 
 #. MSG_BACK c=18
-#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:2759
+#: ../../Firmware/messages.cpp:59 ../../Firmware/ultralcd.cpp:2759
 #: ../../Firmware/ultralcd.cpp:5869 ../../Firmware/ultralcd.cpp:7849
 msgid "Back"
 msgstr "Tillbaka"
 
 #. MSG_BED c=13
 #: ../../Firmware/Marlin_main.cpp:2048 ../../Firmware/Marlin_main.cpp:4764
-#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:11
+#: ../../Firmware/Marlin_main.cpp:4816 ../../Firmware/messages.cpp:12
 #: ../../Firmware/ultralcd.cpp:1411 ../../Firmware/ultralcd.cpp:5729
 #: ../../Firmware/ultralcd.cpp:5899
 msgid "Bed"
 msgstr "Bädd"
 
 #. MSG_BED_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:13
+#: ../../Firmware/Marlin_main.cpp:6257 ../../Firmware/messages.cpp:14
 #: ../../Firmware/ultralcd.cpp:578
 msgid "Bed Heating"
 msgstr "Bädden värms upp"
 
 #. MSG_BED_DONE c=20
-#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:12
+#: ../../Firmware/Marlin_main.cpp:6295 ../../Firmware/messages.cpp:13
 #: ../../Firmware/ultralcd.cpp:581
 msgid "Bed done"
 msgstr "Bädd klar"
@@ -158,7 +159,7 @@ msgstr "Bäddnivå korrekt"
 #: ../../Firmware/Marlin_main.cpp:3000
 #: ../../Firmware/mesh_bed_calibration.cpp:2862
 #: ../../Firmware/mesh_bed_calibration.cpp:2870
-#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:14
+#: ../../Firmware/mesh_bed_calibration.cpp:2896 ../../Firmware/messages.cpp:15
 msgid ""
 "Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
 "reset."
@@ -172,7 +173,7 @@ msgid "Bed/Heater"
 msgstr "Bädd/Värmare"
 
 #. MSG_BELT_STATUS c=18
-#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:1466
+#: ../../Firmware/messages.cpp:17 ../../Firmware/ultralcd.cpp:1466
 #: ../../Firmware/ultralcd.cpp:1734
 msgid "Belt status"
 msgstr "Bält status"
@@ -184,17 +185,17 @@ msgstr "Bält test"
 
 #. MSG_RECOVER_PRINT c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:1604 ../../Firmware/Marlin_main.cpp:1626
-#: ../../Firmware/messages.cpp:76
+#: ../../Firmware/messages.cpp:77
 msgid "Blackout occurred. Recover print?"
 msgstr "Blackout inträffat. Återställa utskr?"
 
 #. MSG_BRIGHT c=6
-#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
 msgid "Bright"
 msgstr "Ljus"
 
 #. MSG_BRIGHTNESS c=18
-#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4858
+#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:4858
 #: ../../Firmware/ultralcd.cpp:5797
 msgid "Brightness"
 msgstr "Ljusstyrka"
@@ -205,7 +206,7 @@ msgid "Calibrate XYZ"
 msgstr "Kalibrerar XYZ"
 
 #. MSG_HOMEYZ c=18
-#: ../../Firmware/messages.cpp:47 ../../Firmware/ultralcd.cpp:4916
+#: ../../Firmware/messages.cpp:48 ../../Firmware/ultralcd.cpp:4916
 msgid "Calibrate Z"
 msgstr "Kalibrera Z"
 
@@ -219,7 +220,7 @@ msgstr ""
 "Klicka när du är klar."
 
 #. MSG_CALIBRATE_Z_AUTO c=20 r=2
-#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:18
+#: ../../Firmware/Marlin_main.cpp:2167 ../../Firmware/messages.cpp:19
 #: ../../Firmware/ultralcd.cpp:626
 msgid "Calibrating Z"
 msgstr "Kalibrerar Z"
@@ -239,7 +240,7 @@ msgid "Calibrating home"
 msgstr "Kalibrerar hem"
 
 #. MSG_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:62 ../../Firmware/ultralcd.cpp:5589
+#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:5589
 msgid "Calibration"
 msgstr "Kalibrering"
 
@@ -259,7 +260,7 @@ msgid "Change SD card"
 msgstr ""
 
 #. MSG_FILAMENTCHANGE c=18
-#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:5505
+#: ../../Firmware/messages.cpp:39 ../../Firmware/ultralcd.cpp:5505
 #: ../../Firmware/ultralcd.cpp:5738
 msgid "Change filament"
 msgstr "Ändra filament"
@@ -275,13 +276,13 @@ msgid "Changed correctly?"
 msgstr "Ändring korrekt?"
 
 #. MSG_CHECKING_X c=20
-#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:6186
+#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6186
 #: ../../Firmware/ultralcd.cpp:7313
 msgid "Checking X axis"
 msgstr "Kontroll X-axel"
 
 #. MSG_CHECKING_Y c=20
-#: ../../Firmware/messages.cpp:21 ../../Firmware/ultralcd.cpp:6195
+#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:6195
 #: ../../Firmware/ultralcd.cpp:7314
 msgid "Checking Y axis"
 msgstr "Kontroll Y-axel"
@@ -292,7 +293,7 @@ msgid "Checking Z axis"
 msgstr "Kontroll Z-axel"
 
 #. MSG_SELFTEST_CHECK_BED c=20
-#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7316
+#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7316
 msgid "Checking bed"
 msgstr "Kontroll bädd"
 
@@ -312,7 +313,7 @@ msgid "Checking hotend"
 msgstr "Kontroll hotend"
 
 #. MSG_SELFTEST_CHECK_FSENSOR c=20
-#: ../../Firmware/messages.cpp:89 ../../Firmware/ultralcd.cpp:7319
+#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:7319
 #: ../../Firmware/ultralcd.cpp:7320
 msgid "Checking sensors"
 msgstr "Kontroll sensorer"
@@ -328,17 +329,17 @@ msgid "Color not correct"
 msgstr "Färg ej korrekt"
 
 #. MSG_COMMUNITY_MADE c=18
-#: ../../Firmware/messages.cpp:22 ../../Firmware/ultralcd.cpp:3733
+#: ../../Firmware/messages.cpp:23 ../../Firmware/ultralcd.cpp:3733
 msgid "Community made"
 msgstr "Allmänhetsgjord"
 
 #. MSG_CONTINUE_SHORT c=5
-#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4712
 msgid "Cont."
 msgstr "Frts."
 
 #. MSG_COOLDOWN c=18
-#: ../../Firmware/messages.cpp:24 ../../Firmware/ultralcd.cpp:2133
+#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:2133
 msgid "Cooldown"
 msgstr "Kyla ner"
 
@@ -348,13 +349,13 @@ msgid "Copy selected language?"
 msgstr "Kopiera det valda språket?"
 
 #. MSG_CRASH c=7
-#: ../../Firmware/messages.cpp:25 ../../Firmware/ultralcd.cpp:1229
+#: ../../Firmware/messages.cpp:26 ../../Firmware/ultralcd.cpp:1229
 #: ../../Firmware/ultralcd.cpp:1270 ../../Firmware/ultralcd.cpp:1280
 msgid "Crash"
 msgstr "Krock"
 
 #. MSG_CRASHDETECT c=13
-#: ../../Firmware/messages.cpp:27 ../../Firmware/ultralcd.cpp:4349
+#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4352
 #: ../../Firmware/ultralcd.cpp:5773 ../../Firmware/ultralcd.cpp:5775
 #: ../../Firmware/ultralcd.cpp:5779
@@ -362,7 +363,7 @@ msgid "Crash det."
 msgstr "Krockdetekt."
 
 #. MSG_CRASH_DETECTED c=20
-#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:26
+#: ../../Firmware/Marlin_main.cpp:597 ../../Firmware/messages.cpp:27
 msgid "Crash detected."
 msgstr "Krock upptäckt."
 
@@ -378,13 +379,13 @@ msgstr ""
 "normalt läge"
 
 #. MSG_CUT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5183
+#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:5183
 #: ../../Firmware/ultralcd.cpp:5575
 msgid "Cut filament"
 msgstr "Skär filament"
 
 #. MSG_CUTTER c=9
-#: ../../Firmware/messages.cpp:124 ../../Firmware/ultralcd.cpp:4311
+#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4311
 #: ../../Firmware/ultralcd.cpp:4316 ../../Firmware/ultralcd.cpp:4321
 msgid "Cutter"
 msgstr "Skärare"
@@ -400,7 +401,7 @@ msgid "Date:"
 msgstr "Datum:"
 
 #. MSG_DIM c=6
-#: ../../Firmware/messages.cpp:155 ../../Firmware/ultralcd.cpp:5872
+#: ../../Firmware/messages.cpp:156 ../../Firmware/ultralcd.cpp:5872
 msgid "Dim"
 msgstr ""
 
@@ -411,7 +412,7 @@ msgstr "Inaktivera stepper"
 
 #. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
 #: ../../Firmware/Marlin_main.cpp:1549 ../../Firmware/Marlin_main.cpp:3408
-#: ../../Firmware/messages.cpp:10
+#: ../../Firmware/messages.cpp:11
 msgid ""
 "Distance between tip of the nozzle and the bed surface has not been set yet. "
 "Please follow the manual, chapter First steps, section First layer "
@@ -435,7 +436,7 @@ msgid "E-correct:"
 msgstr "E-korrektion:"
 
 #. MSG_ERROR c=10
-#: ../../Firmware/messages.cpp:28 ../../Firmware/ultralcd.cpp:2287
+#: ../../Firmware/messages.cpp:29 ../../Firmware/ultralcd.cpp:2287
 msgid "ERROR:"
 msgstr "FEL:"
 
@@ -445,7 +446,7 @@ msgid "ERROR: Filament sensor is not responding, please check connection."
 msgstr "FEL: Filamentsensorn svarar inte, kontrollera anslutningen."
 
 #. MSG_EJECT_FILAMENT c=17
-#: ../../Firmware/messages.cpp:55 ../../Firmware/ultralcd.cpp:5164
+#: ../../Firmware/messages.cpp:56 ../../Firmware/ultralcd.cpp:5164
 #: ../../Firmware/ultralcd.cpp:5573
 msgid "Eject filament"
 msgstr "Mata ut filament"
@@ -471,13 +472,13 @@ msgid "Endstops"
 msgstr "Ändlägen"
 
 #. MSG_EXTRUDER c=17
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:29
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:30
 #: ../../Firmware/ultralcd.cpp:3503
 msgid "Extruder"
 msgstr ""
 
 #. MSG_EXTRUDER_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7329
 msgid "Extruder fan:"
 msgstr "Extruderfläkt:"
@@ -488,14 +489,14 @@ msgid "Extruder info"
 msgstr ""
 
 #. MSG_FSENSOR_AUTOLOAD c=13
-#: ../../Firmware/messages.cpp:43 ../../Firmware/ultralcd.cpp:4237
+#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:4237
 #: ../../Firmware/ultralcd.cpp:4245 ../../Firmware/ultralcd.cpp:4256
 #: ../../Firmware/ultralcd.cpp:4258
 msgid "F. autoload"
 msgstr "F. autoladdn"
 
 #. MSG_FS_ACTION c=10
-#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:4712
+#: ../../Firmware/messages.cpp:148 ../../Firmware/ultralcd.cpp:4712
 #: ../../Firmware/ultralcd.cpp:4715
 msgid "FS Action"
 msgstr "FS aktion"
@@ -526,33 +527,33 @@ msgid "False triggering"
 msgstr "Felaktig utlösare"
 
 #. MSG_FAN_SPEED c=14
-#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:5731
+#: ../../Firmware/messages.cpp:34 ../../Firmware/ultralcd.cpp:5731
 #: ../../Firmware/ultralcd.cpp:5901
 msgid "Fan speed"
 msgstr "Fläktfart"
 
 #. MSG_SELFTEST_FAN c=20
-#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:7151
+#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7151
 #: ../../Firmware/ultralcd.cpp:7309 ../../Firmware/ultralcd.cpp:7310
 #: ../../Firmware/ultralcd.cpp:7311
 msgid "Fan test"
 msgstr "Fläkttest"
 
 #. MSG_FANS_CHECK c=13
-#: ../../Firmware/messages.cpp:30 ../../Firmware/ultralcd.cpp:4819
+#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:4819
 #: ../../Firmware/ultralcd.cpp:5764
 msgid "Fans check"
 msgstr "Fläktcheck"
 
 #. MSG_FIL_RUNOUTS c=15
-#: ../../Firmware/messages.cpp:31 ../../Firmware/ultralcd.cpp:1228
+#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:1228
 #: ../../Firmware/ultralcd.cpp:1269 ../../Firmware/ultralcd.cpp:1335
 #: ../../Firmware/ultralcd.cpp:1337
 msgid "Fil. runouts"
 msgstr "Fil. avbrott"
 
 #. MSG_FSENSOR c=12
-#: ../../Firmware/messages.cpp:44 ../../Firmware/ultralcd.cpp:3459
+#: ../../Firmware/messages.cpp:45 ../../Firmware/ultralcd.cpp:3459
 #: ../../Firmware/ultralcd.cpp:4236 ../../Firmware/ultralcd.cpp:4242
 #: ../../Firmware/ultralcd.cpp:4252 ../../Firmware/ultralcd.cpp:5745
 #: ../../Firmware/ultralcd.cpp:5749 ../../Firmware/ultralcd.cpp:5753
@@ -561,12 +562,12 @@ msgstr ""
 
 #. MSG_FILAMENT c=17
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:32 ../../Firmware/ultralcd.cpp:3843
+#: ../../Firmware/messages.cpp:33 ../../Firmware/ultralcd.cpp:3843
 msgid "Filament"
 msgstr "Mata ut filament"
 
 #. MSG_FILAMENT_CLEAN c=20 r=2
-#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:2295
+#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:2295
 #: ../../Firmware/ultralcd.cpp:2301
 msgid "Filament extruding & with correct color?"
 msgstr "Extruderas filament med rätt färg?"
@@ -577,7 +578,7 @@ msgid "Filament not loaded"
 msgstr "Filament ej laddat"
 
 #. MSG_SELFTEST_FILAMENT_SENSOR c=17
-#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:7034
+#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:7034
 #: ../../Firmware/ultralcd.cpp:7038 ../../Firmware/ultralcd.cpp:7042
 #: ../../Firmware/ultralcd.cpp:7338
 msgid "Filament sensor"
@@ -594,13 +595,13 @@ msgid "File incomplete. Continue anyway?"
 msgstr "Filen är ofullständig. Fortsätta ändå?"
 
 #. MSG_FINISHING_MOVEMENTS c=20
-#: ../../Firmware/messages.cpp:40 ../../Firmware/ultralcd.cpp:5322
+#: ../../Firmware/messages.cpp:41 ../../Firmware/ultralcd.cpp:5322
 #: ../../Firmware/ultralcd.cpp:5638
 msgid "Finishing movements"
 msgstr "Avslutar flyttning"
 
 #. MSG_V2_CALIBRATION c=18
-#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:4906
+#: ../../Firmware/messages.cpp:121 ../../Firmware/ultralcd.cpp:4906
 #: ../../Firmware/ultralcd.cpp:5432
 msgid "First layer cal."
 msgstr "Förstalager kalib."
@@ -623,7 +624,7 @@ msgid "Flow"
 msgstr "Flöde"
 
 #. MSG_SELFTEST_PART_FAN c=20
-#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:7004
+#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7004
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Front print fan?"
 msgstr "Frontfläkt?"
@@ -653,13 +654,13 @@ msgstr ""
 "Utskriften avbröts."
 
 #. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
-#: ../../Firmware/messages.cpp:130 ../../Firmware/util.cpp:335
+#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:335
 #: ../../Firmware/util.cpp:471
 msgid "G-code sliced for a different printer type. Continue?"
 msgstr "G-kod genererad för en annan skrivartyp. Fortsätta?"
 
 #. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
-#: ../../Firmware/messages.cpp:131 ../../Firmware/util.cpp:341
+#: ../../Firmware/messages.cpp:132 ../../Firmware/util.cpp:341
 #: ../../Firmware/util.cpp:477
 msgid ""
 "G-code sliced for a different printer type. Please re-slice the model again. "
@@ -683,14 +684,14 @@ msgstr ""
 "Utskriften avbröts."
 
 #. MSG_GCODE c=8
-#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4663
+#: ../../Firmware/messages.cpp:130 ../../Firmware/ultralcd.cpp:4663
 #: ../../Firmware/ultralcd.cpp:4666 ../../Firmware/ultralcd.cpp:4669
 #: ../../Firmware/ultralcd.cpp:4672
 msgid "Gcode"
 msgstr ""
 
 #. MSG_HW_SETUP c=18
-#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:4680
+#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4680
 #: ../../Firmware/ultralcd.cpp:4734 ../../Firmware/ultralcd.cpp:4826
 msgid "HW Setup"
 msgstr "HW inställning"
@@ -701,7 +702,7 @@ msgid "Heater/Thermistor"
 msgstr "Värmare/Termistor"
 
 #. MSG_HEATING c=20
-#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:45
+#: ../../Firmware/Marlin_main.cpp:6200 ../../Firmware/messages.cpp:46
 #: ../../Firmware/ultralcd.cpp:570
 msgid "Heating"
 msgstr "Uppvärmning"
@@ -712,13 +713,13 @@ msgid "Heating disabled by safety timer."
 msgstr "Uppvärmning avaktiverad av säkerhetstimer."
 
 #. MSG_HEATING_COMPLETE c=20
-#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:46
+#: ../../Firmware/Marlin_main.cpp:6231 ../../Firmware/messages.cpp:47
 #: ../../Firmware/ultralcd.cpp:573
 msgid "Heating done."
 msgstr "Uppvärmning klar."
 
 #. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
-#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4050
+#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:4050
 msgid ""
 "Hi, I am your Original Prusa i3 printer. I will guide you through a short "
 "setup process, in which the Z-axis will be calibrated. Then, you will be "
@@ -729,7 +730,7 @@ msgstr ""
 "att skriva ut."
 
 #. MSG_WIZARD_WELCOME c=20 r=7
-#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4053
+#: ../../Firmware/messages.cpp:118 ../../Firmware/ultralcd.cpp:4053
 msgid ""
 "Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
 "through the setup process?"
@@ -738,7 +739,7 @@ msgstr ""
 "installationsprocessen?"
 
 #. MSG_HIGH_POWER c=10
-#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4366
+#: ../../Firmware/messages.cpp:101 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5785
 #: ../../Firmware/ultralcd.cpp:5788
 msgid "High power"
@@ -770,7 +771,7 @@ msgid "Improving bed calibration point"
 msgstr ""
 
 #. MSG_INFO_SCREEN c=18
-#: ../../Firmware/messages.cpp:112 ../../Firmware/ultralcd.cpp:5486
+#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:5486
 msgid "Info screen"
 msgstr "Infoskärm"
 
@@ -793,30 +794,30 @@ msgstr ""
 "Infoga filamentet (ladda inte in det) i extrudern och tryck sedan på knappen."
 
 #. MSG_FILAMENT_LOADED c=20 r=2
-#: ../../Firmware/messages.cpp:37 ../../Firmware/ultralcd.cpp:3863
+#: ../../Firmware/messages.cpp:38 ../../Firmware/ultralcd.cpp:3863
 #: ../../Firmware/ultralcd.cpp:4116 ../../Firmware/ultralcd.cpp:4119
 msgid "Is filament loaded?"
 msgstr "Är filament isatt?"
 
 #. MSG_STEEL_SHEET_CHECK c=20 r=2
 #: ../../Firmware/Marlin_main.cpp:3309 ../../Firmware/Marlin_main.cpp:4883
-#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4092
+#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:4092
 msgid "Is steel sheet on heatbed?"
 msgstr "Ligger metallskiva på värmebädden?"
 
 #. MSG_ITERATION c=12
-#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:48
+#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.cpp:49
 msgid "Iteration"
 msgstr ""
 
 #. MSG_LAST_PRINT c=18
-#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:1156
+#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1156
 #: ../../Firmware/ultralcd.cpp:1304
 msgid "Last print"
 msgstr "Senaste utskrift"
 
 #. MSG_LAST_PRINT_FAILURES c=20
-#: ../../Firmware/messages.cpp:52 ../../Firmware/ultralcd.cpp:1177
+#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:1177
 #: ../../Firmware/ultralcd.cpp:1267 ../../Firmware/ultralcd.cpp:1277
 #: ../../Firmware/ultralcd.cpp:1334
 msgid "Last print failures"
@@ -828,7 +829,7 @@ msgid "Left"
 msgstr "Vänster"
 
 #. MSG_SELFTEST_EXTRUDER_FAN c=20
-#: ../../Firmware/messages.cpp:83 ../../Firmware/ultralcd.cpp:7010
+#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:7010
 #: ../../Firmware/ultralcd.cpp:7157 ../../Firmware/ultralcd.cpp:7162
 msgid "Left hotend fan?"
 msgstr "Vänst hotend fläkt?"
@@ -839,12 +840,12 @@ msgid "Left side [μm]"
 msgstr "Vänstsida [μm]"
 
 #. MSG_BL_HIGH c=12
-#: ../../Firmware/messages.cpp:151 ../../Firmware/ultralcd.cpp:5870
+#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5870
 msgid "Level Bright"
 msgstr "Ljusnivå"
 
 #. MSG_BL_LOW c=12
-#: ../../Firmware/messages.cpp:152 ../../Firmware/ultralcd.cpp:5871
+#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5871
 msgid "Level Dimmed"
 msgstr "Nivå dämpad"
 
@@ -854,7 +855,7 @@ msgid "Lin. correction"
 msgstr "Linjär korrektion"
 
 #. MSG_BABYSTEP_Z c=18
-#: ../../Firmware/messages.cpp:9 ../../Firmware/ultralcd.cpp:4846
+#: ../../Firmware/messages.cpp:10 ../../Firmware/ultralcd.cpp:4846
 #: ../../Firmware/ultralcd.cpp:5501
 msgid "Live adjust Z"
 msgstr "Live justera Z"
@@ -865,7 +866,7 @@ msgid "Load all"
 msgstr "Ladda alla"
 
 #. MSG_LOAD_FILAMENT c=17
-#: ../../Firmware/messages.cpp:53 ../../Firmware/ultralcd.cpp:5130
+#: ../../Firmware/messages.cpp:54 ../../Firmware/ultralcd.cpp:5130
 #: ../../Firmware/ultralcd.cpp:5141 ../../Firmware/ultralcd.cpp:5570
 #: ../../Firmware/ultralcd.cpp:5584
 msgid "Load filament"
@@ -882,7 +883,7 @@ msgid "Loading color"
 msgstr "Laddar färg"
 
 #. MSG_LOADING_FILAMENT c=20
-#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:54
+#: ../../Firmware/Marlin_main.cpp:3638 ../../Firmware/messages.cpp:55
 #: ../../Firmware/mmu.cpp:872 ../../Firmware/mmu.cpp:906
 #: ../../Firmware/mmu.cpp:1014 ../../Firmware/mmu.cpp:1026
 #: ../../Firmware/ultralcd.cpp:2204 ../../Firmware/ultralcd.cpp:3957
@@ -895,7 +896,7 @@ msgid "Loose pulley"
 msgstr "Lös pulley"
 
 #. MSG_SOUND_LOUD c=7
-#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4470
 msgid "Loud"
 msgstr "Högt"
@@ -911,7 +912,7 @@ msgid "MK3S firmware detected on MK3 printer"
 msgstr "MK3S-firmware upptäckt på MK3-skrivare"
 
 #. MSG_MMU_MODE c=8
-#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4389
+#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4389
 #: ../../Firmware/ultralcd.cpp:4390
 msgid "MMU Mode"
 msgstr "MMU-läge"
@@ -932,7 +933,7 @@ msgid "MMU OK. Resuming..."
 msgstr "MMU OK. Återupptar..."
 
 #. MSG_MMU_FAILS c=15
-#: ../../Firmware/messages.cpp:63 ../../Firmware/ultralcd.cpp:1178
+#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1178
 #: ../../Firmware/ultralcd.cpp:1201
 msgid "MMU fails"
 msgstr "MMU felar"
@@ -943,7 +944,7 @@ msgid "MMU load failed"
 msgstr "MMU-laddning felade"
 
 #. MSG_MMU_LOAD_FAILS c=15
-#: ../../Firmware/messages.cpp:64 ../../Firmware/ultralcd.cpp:1179
+#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:1179
 #: ../../Firmware/ultralcd.cpp:1202
 msgid "MMU load fails"
 msgstr "MMU-laddn felar"
@@ -964,12 +965,12 @@ msgid "MMU2 connected"
 msgstr "MMU2 ansluten"
 
 #. MSG_MAGNETS_COMP c=13
-#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5844
+#: ../../Firmware/messages.cpp:147 ../../Firmware/ultralcd.cpp:5844
 msgid "Magnets comp."
 msgstr "Magnets komp."
 
 #. MSG_MAIN c=18
-#: ../../Firmware/messages.cpp:57 ../../Firmware/ultralcd.cpp:1155
+#: ../../Firmware/messages.cpp:58 ../../Firmware/ultralcd.cpp:1155
 #: ../../Firmware/ultralcd.cpp:1303 ../../Firmware/ultralcd.cpp:1346
 #: ../../Firmware/ultralcd.cpp:1653 ../../Firmware/ultralcd.cpp:4803
 #: ../../Firmware/ultralcd.cpp:4900 ../../Firmware/ultralcd.cpp:5127
@@ -985,23 +986,23 @@ msgstr "Mätt skevhet"
 
 #. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3290
-#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:61
+#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.cpp:62
 msgid "Measuring reference height of calibration point"
 msgstr "Mätning av referenshöjd för kalibreringspunkt"
 
 #. MSG_MESH c=12
-#: ../../Firmware/messages.cpp:143 ../../Firmware/ultralcd.cpp:5840
+#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:5840
 msgid "Mesh"
 msgstr "Nätverk"
 
 #. MSG_MESH_BED_LEVELING c=18
-#: ../../Firmware/messages.cpp:144 ../../Firmware/ultralcd.cpp:4831
+#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:4831
 #: ../../Firmware/ultralcd.cpp:4918
 msgid "Mesh Bed Leveling"
 msgstr "Bäddytsjustering"
 
 #. MSG_MODE c=6
-#: ../../Firmware/messages.cpp:99 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:100 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4346 ../../Firmware/ultralcd.cpp:4366
 #: ../../Firmware/ultralcd.cpp:4369 ../../Firmware/ultralcd.cpp:4372
 #: ../../Firmware/ultralcd.cpp:4375 ../../Firmware/ultralcd.cpp:5771
@@ -1017,14 +1018,14 @@ msgid "Mode change in progress..."
 msgstr "Lägesändring pågår..."
 
 #. MSG_MODEL c=8
-#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4583
+#: ../../Firmware/messages.cpp:129 ../../Firmware/ultralcd.cpp:4583
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4589
 #: ../../Firmware/ultralcd.cpp:4592
 msgid "Model"
 msgstr "Modell"
 
 #. MSG_SELFTEST_MOTOR c=18
-#: ../../Firmware/messages.cpp:90 ../../Firmware/ultralcd.cpp:6990
+#: ../../Firmware/messages.cpp:91 ../../Firmware/ultralcd.cpp:6990
 #: ../../Firmware/ultralcd.cpp:6999 ../../Firmware/ultralcd.cpp:7017
 msgid "Motor"
 msgstr ""
@@ -1050,7 +1051,7 @@ msgid "Move axis"
 msgstr "Flytta axlar"
 
 #. MSG_NA c=3
-#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:123
+#: ../../Firmware/menu.cpp:196 ../../Firmware/messages.cpp:124
 #: ../../Firmware/ultralcd.cpp:2510 ../../Firmware/ultralcd.cpp:2555
 #: ../../Firmware/ultralcd.cpp:3419 ../../Firmware/ultralcd.cpp:4236
 #: ../../Firmware/ultralcd.cpp:4284 ../../Firmware/ultralcd.cpp:5745
@@ -1064,7 +1065,7 @@ msgid "New firmware version available:"
 msgstr "Ny firmware version tillgänglig:"
 
 #. MSG_NO c=4
-#: ../../Firmware/messages.cpp:65 ../../Firmware/ultralcd.cpp:2812
+#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:2812
 #: ../../Firmware/ultralcd.cpp:3188 ../../Firmware/ultralcd.cpp:4793
 #: ../../Firmware/ultralcd.cpp:5996
 msgid "No"
@@ -1081,7 +1082,7 @@ msgid "No move."
 msgstr "Ingen rörelse."
 
 #. MSG_NONE c=8
-#: ../../Firmware/messages.cpp:125 ../../Firmware/ultralcd.cpp:4413
+#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4413
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:4583 ../../Firmware/ultralcd.cpp:4592
 #: ../../Firmware/ultralcd.cpp:4622 ../../Firmware/ultralcd.cpp:4631
@@ -1090,7 +1091,7 @@ msgid "None"
 msgstr "Ingen"
 
 #. MSG_NORMAL c=7
-#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4344
+#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4344
 #: ../../Firmware/ultralcd.cpp:4389 ../../Firmware/ultralcd.cpp:4405
 #: ../../Firmware/ultralcd.cpp:4424 ../../Firmware/ultralcd.cpp:5771
 msgid "Normal"
@@ -1102,7 +1103,7 @@ msgid "Not connected"
 msgstr "Inte ansluten"
 
 #. MSG_SELFTEST_FAN_NO c=19
-#: ../../Firmware/messages.cpp:86 ../../Firmware/ultralcd.cpp:7176
+#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7176
 #: ../../Firmware/ultralcd.cpp:7191 ../../Firmware/ultralcd.cpp:7199
 msgid "Not spinning"
 msgstr "Roterar inte"
@@ -1125,7 +1126,7 @@ msgid "Now remove the test print from steel sheet."
 msgstr "Ta nu bort testutskriften från metallskivan."
 
 #. MSG_NOZZLE c=10
-#: ../../Firmware/messages.cpp:66 ../../Firmware/ultralcd.cpp:1410
+#: ../../Firmware/messages.cpp:67 ../../Firmware/ultralcd.cpp:1410
 #: ../../Firmware/ultralcd.cpp:4501 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4507 ../../Firmware/ultralcd.cpp:4510
 #: ../../Firmware/ultralcd.cpp:5728 ../../Firmware/ultralcd.cpp:5890
@@ -1133,12 +1134,12 @@ msgid "Nozzle"
 msgstr "Munstycke"
 
 #. MSG_NOZZLE_DIAMETER c=10
-#: ../../Firmware/messages.cpp:132 ../../Firmware/ultralcd.cpp:4554
+#: ../../Firmware/messages.cpp:133 ../../Firmware/ultralcd.cpp:4554
 msgid "Nozzle d."
 msgstr "Munst dia."
 
 #. MSG_OFF c=3
-#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:121
+#: ../../Firmware/menu.cpp:467 ../../Firmware/messages.cpp:122
 #: ../../Firmware/ultralcd.cpp:4242 ../../Firmware/ultralcd.cpp:4258
 #: ../../Firmware/ultralcd.cpp:4292 ../../Firmware/ultralcd.cpp:4321
 #: ../../Firmware/ultralcd.cpp:4350 ../../Firmware/ultralcd.cpp:4819
@@ -1158,7 +1159,7 @@ msgstr ""
 "in."
 
 #. MSG_ON c=3
-#: ../../Firmware/messages.cpp:122 ../../Firmware/ultralcd.cpp:4252
+#: ../../Firmware/messages.cpp:123 ../../Firmware/ultralcd.cpp:4252
 #: ../../Firmware/ultralcd.cpp:4256 ../../Firmware/ultralcd.cpp:4288
 #: ../../Firmware/ultralcd.cpp:4311 ../../Firmware/ultralcd.cpp:4349
 #: ../../Firmware/ultralcd.cpp:4819 ../../Firmware/ultralcd.cpp:4838
@@ -1170,12 +1171,12 @@ msgid "On"
 msgstr "På"
 
 #. MSG_SOUND_ONCE c=7
-#: ../../Firmware/messages.cpp:141 ../../Firmware/ultralcd.cpp:4461
+#: ../../Firmware/messages.cpp:142 ../../Firmware/ultralcd.cpp:4461
 msgid "Once"
 msgstr "En gång"
 
 #. MSG_PAUSED_THERMAL_ERROR c=20
-#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:163
+#: ../../Firmware/Marlin_main.cpp:9715 ../../Firmware/messages.cpp:164
 msgid "PAUSED THERMAL ERROR"
 msgstr ""
 
@@ -1201,7 +1202,7 @@ msgstr "PINDA uppvärmning"
 
 #. MSG_PINDA_CALIBRATION c=13
 #: ../../Firmware/Marlin_main.cpp:4929 ../../Firmware/Marlin_main.cpp:5032
-#: ../../Firmware/messages.cpp:108 ../../Firmware/ultralcd.cpp:657
+#: ../../Firmware/messages.cpp:109 ../../Firmware/ultralcd.cpp:657
 #: ../../Firmware/ultralcd.cpp:4838 ../../Firmware/ultralcd.cpp:4928
 msgid "PINDA cal."
 msgstr "PINDA kal."
@@ -1212,7 +1213,7 @@ msgid "PINDA calibration failed"
 msgstr "PINDA-kalibrering misslyckades"
 
 #. MSG_PINDA_CALIBRATION_DONE c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:109
+#: ../../Firmware/Marlin_main.cpp:5109 ../../Firmware/messages.cpp:110
 #: ../../Firmware/ultralcd.cpp:3363
 msgid ""
 "PINDA calibration is finished and active. It can be disabled in menu "
@@ -1222,18 +1223,18 @@ msgstr ""
 "menyn Inställningar->PINDA kal."
 
 #. MSG_PAUSE c=5
-#: ../../Firmware/messages.cpp:149 ../../Firmware/ultralcd.cpp:4715
+#: ../../Firmware/messages.cpp:150 ../../Firmware/ultralcd.cpp:4715
 msgid "Pause"
 msgstr "Paus"
 
 #. MSG_PAUSE_PRINT c=18
-#: ../../Firmware/messages.cpp:68 ../../Firmware/ultralcd.cpp:5515
+#: ../../Firmware/messages.cpp:69 ../../Firmware/ultralcd.cpp:5515
 #: ../../Firmware/ultralcd.cpp:5517
 msgid "Pause print"
 msgstr "Pausa utskrift"
 
 #. MSG_PAPER c=20 r=10
-#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:67
+#: ../../Firmware/Marlin_main.cpp:3312 ../../Firmware/messages.cpp:68
 msgid ""
 "Place a sheet of paper under the nozzle during the calibration of first 4 "
 "points. If the nozzle catches the paper, power off the printer immediately."
@@ -1242,7 +1243,7 @@ msgstr ""
 "punkterna. Stäng av skrivaren omedelbart om munstycket rör vid pappret.."
 
 #. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:113 ../../Firmware/ultralcd.cpp:4184
+#: ../../Firmware/messages.cpp:114 ../../Firmware/ultralcd.cpp:4184
 msgid ""
 "Please check our handbook and fix the problem. Then resume the Wizard by "
 "rebooting the printer."
@@ -1266,7 +1267,7 @@ msgid "Please clean heatbed and then press the knob."
 msgstr "Rengör bädden och tryck sedan på knappen."
 
 #. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:23
+#: ../../Firmware/Marlin_main.cpp:3288 ../../Firmware/messages.cpp:24
 msgid "Please clean the nozzle for calibration. Click when done."
 msgstr "Rengör munstycket för kalibrering. Klicka när du är klar."
 
@@ -1298,19 +1299,19 @@ msgid "Please open idler and remove filament manually."
 msgstr "Öppna idler och ta bort filamentet manuellt."
 
 #. MSG_PLACE_STEEL_SHEET c=20 r=5
-#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:69
+#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.cpp:70
 #: ../../Firmware/ultralcd.cpp:4093
 msgid "Please place steel sheet on heatbed."
 msgstr "Placera metallskiva på värmebädden."
 
 #. MSG_PRESS_TO_UNLOAD c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:11577 ../../Firmware/Marlin_main.cpp:11630
-#: ../../Firmware/messages.cpp:73
+#: ../../Firmware/messages.cpp:74
 msgid "Please press the knob to unload filament"
 msgstr "Vänligen tryck på knappen för att mata ut filament"
 
 #. MSG_PULL_OUT_FILAMENT c=20 r=4
-#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:5221
+#: ../../Firmware/messages.cpp:76 ../../Firmware/ultralcd.cpp:5221
 msgid "Please pull out filament immediately"
 msgstr "Vänligen ta ut filamentet omedelbart"
 
@@ -1326,7 +1327,7 @@ msgstr "Vänligen ta bort fraktinsatserna först."
 
 #. MSG_REMOVE_STEEL_SHEET c=20 r=4
 #: ../../Firmware/Marlin_main.cpp:3310 ../../Firmware/Marlin_main.cpp:4893
-#: ../../Firmware/messages.cpp:78
+#: ../../Firmware/messages.cpp:79
 msgid "Please remove steel sheet from heatbed."
 msgstr "Ta bort metallskivan från värmebädden."
 
@@ -1352,13 +1353,13 @@ msgstr "Vänligen uppgradera."
 
 #. MSG_PLEASE_WAIT c=20
 #: ../../Firmware/Marlin_main.cpp:3544 ../../Firmware/Marlin_main.cpp:3560
-#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:70
+#: ../../Firmware/Marlin_main.cpp:7928 ../../Firmware/messages.cpp:71
 #: ../../Firmware/ultralcd.cpp:2194 ../../Firmware/ultralcd.cpp:2205
 msgid "Please wait"
 msgstr "Vänligen vänta"
 
 #. MSG_POWER_FAILURES c=15
-#: ../../Firmware/messages.cpp:71 ../../Firmware/ultralcd.cpp:1227
+#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:1227
 #: ../../Firmware/ultralcd.cpp:1268 ../../Firmware/ultralcd.cpp:1278
 msgid "Power failures"
 msgstr "Strömavbrott"
@@ -1369,12 +1370,12 @@ msgid "Preheat"
 msgstr "Förvärm"
 
 #. MSG_PREHEAT_NOZZLE c=20
-#: ../../Firmware/messages.cpp:72 ../../Firmware/ultralcd.cpp:2288
+#: ../../Firmware/messages.cpp:73 ../../Firmware/ultralcd.cpp:2288
 msgid "Preheat the nozzle!"
 msgstr "Förvärm munstycket!"
 
 #. MSG_WIZARD_HEATING c=20 r=3
-#: ../../Firmware/messages.cpp:115 ../../Firmware/ultralcd.cpp:2908
+#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:2908
 #: ../../Firmware/ultralcd.cpp:3932 ../../Firmware/ultralcd.cpp:3934
 msgid "Preheating nozzle. Please wait."
 msgstr "Förvärmer munstycke. Vänta."
@@ -1415,18 +1416,18 @@ msgid "Press the knob to resume nozzle temperature."
 msgstr "Tryck på knappen för att återställa munstyckstemperaturen."
 
 #. MSG_PRINT_ABORTED c=20
-#: ../../Firmware/messages.cpp:74 ../../Firmware/ultralcd.cpp:860
+#: ../../Firmware/messages.cpp:75 ../../Firmware/ultralcd.cpp:860
 msgid "Print aborted"
 msgstr "Utskriften avbröts"
 
 #. MSG_PRINT_FAN_SPEED c=16
-#: ../../Firmware/messages.cpp:35 ../../Firmware/ultralcd.cpp:1134
+#: ../../Firmware/messages.cpp:36 ../../Firmware/ultralcd.cpp:1134
 #: ../../Firmware/ultralcd.cpp:7332
 msgid "Print fan:"
 msgstr "Utskriftsfläkt:"
 
 #. MSG_CARD_MENU c=18
-#: ../../Firmware/messages.cpp:19 ../../Firmware/ultralcd.cpp:5543
+#: ../../Firmware/messages.cpp:20 ../../Firmware/ultralcd.cpp:5543
 msgid "Print from SD"
 msgstr "Skriv ut från SD"
 
@@ -1446,7 +1447,7 @@ msgid "Printer IP Addr:"
 msgstr ""
 
 #. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
-#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:41
+#: ../../Firmware/Marlin_main.cpp:1545 ../../Firmware/messages.cpp:42
 msgid ""
 "Printer has not been calibrated yet. Please follow the manual, chapter First "
 "steps, section Calibration flow."
@@ -1469,7 +1470,7 @@ msgstr ""
 "inställningarna. Utskriften avbröts."
 
 #. MSG_RPI_PORT c=13
-#: ../../Firmware/messages.cpp:138 ../../Firmware/ultralcd.cpp:4842
+#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4842
 msgid "RPi port"
 msgstr ""
 
@@ -1496,7 +1497,7 @@ msgid "Rename"
 msgstr "Döp om"
 
 #. MSG_RESET c=14
-#: ../../Firmware/messages.cpp:79 ../../Firmware/ultralcd.cpp:2764
+#: ../../Firmware/messages.cpp:80 ../../Firmware/ultralcd.cpp:2764
 #: ../../Firmware/ultralcd.cpp:5435
 msgid "Reset"
 msgstr "Återställ"
@@ -1507,13 +1508,13 @@ msgid "Reset XYZ calibr."
 msgstr "Återställ XYZ-kal."
 
 #. MSG_RESUME_PRINT c=18
-#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:80
+#: ../../Firmware/Marlin_main.cpp:655 ../../Firmware/messages.cpp:81
 #: ../../Firmware/ultralcd.cpp:5529 ../../Firmware/ultralcd.cpp:5531
 msgid "Resume print"
 msgstr "Återuppta utskrift"
 
 #. MSG_RESUMING_PRINT c=20
-#: ../../Firmware/messages.cpp:81 ../../Firmware/ultralcd.cpp:668
+#: ../../Firmware/messages.cpp:82 ../../Firmware/ultralcd.cpp:668
 msgid "Resuming print"
 msgstr "Återupptar utskrift"
 
@@ -1542,20 +1543,20 @@ msgid "Runouts"
 msgstr "Avbrott"
 
 #. MSG_SD_CARD c=8
-#: ../../Firmware/messages.cpp:134 ../../Firmware/ultralcd.cpp:4403
+#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4403
 #: ../../Firmware/ultralcd.cpp:4405 ../../Firmware/ultralcd.cpp:4422
 #: ../../Firmware/ultralcd.cpp:4424
 msgid "SD card"
 msgstr "SD-kort"
 
 #. MSG_STOPPED c=20
-#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:107
+#: ../../Firmware/Marlin_main.cpp:9744 ../../Firmware/messages.cpp:108
 msgid "STOPPED."
 msgstr "STOPPAD."
 
 #. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
 #: ../../Firmware/Marlin_main.cpp:3294 ../../Firmware/Marlin_main.cpp:3314
-#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:39
+#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.cpp:40
 msgid "Searching bed calibration point"
 msgstr "Söker efter kalibreringspunkt för bädden"
 
@@ -1573,18 +1574,18 @@ msgstr ""
 "Välj ett filament för första lagrets kalibrering och välj det i skärmmenyn."
 
 #. MSG_SELECT_EXTRUDER c=20
-#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:49
+#: ../../Firmware/Marlin_main.cpp:8605 ../../Firmware/messages.cpp:50
 msgid "Select extruder:"
 msgstr "Välj extruder:"
 
 #. MSG_SELECT_FILAMENT c=20
 #: ../../Firmware/Marlin_main.cpp:8574 ../../Firmware/Marlin_main.cpp:8601
-#: ../../Firmware/messages.cpp:50 ../../Firmware/ultralcd.cpp:3842
+#: ../../Firmware/messages.cpp:51 ../../Firmware/ultralcd.cpp:3842
 msgid "Select filament:"
 msgstr "Välj filament:"
 
 #. MSG_SELECT_LANGUAGE c=18
-#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3687
+#: ../../Firmware/messages.cpp:95 ../../Firmware/ultralcd.cpp:3687
 #: ../../Firmware/ultralcd.cpp:4849
 msgid "Select language"
 msgstr "Välj språk"
@@ -1620,7 +1621,7 @@ msgid "Selftest error!"
 msgstr "Självtestfel!"
 
 #. MSG_SELFTEST_FAILED c=20
-#: ../../Firmware/messages.cpp:84 ../../Firmware/ultralcd.cpp:6534
+#: ../../Firmware/messages.cpp:85 ../../Firmware/ultralcd.cpp:6534
 #: ../../Firmware/ultralcd.cpp:7057 ../../Firmware/ultralcd.cpp:7322
 msgid "Selftest failed"
 msgstr "Självtestet felade"
@@ -1647,7 +1648,7 @@ msgid "Set temperature:"
 msgstr "Sätt temperatur:"
 
 #. MSG_SETTINGS c=18
-#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:3499
+#: ../../Firmware/messages.cpp:94 ../../Firmware/ultralcd.cpp:3499
 #: ../../Firmware/ultralcd.cpp:3704 ../../Firmware/ultralcd.cpp:4214
 #: ../../Firmware/ultralcd.cpp:5588 ../../Firmware/ultralcd.cpp:5835
 #: ../../Firmware/ultralcd.cpp:5888
@@ -1661,7 +1662,7 @@ msgstr "Hög skevhet"
 
 #. MSG_SHEET c=10
 #: ../../Firmware/menu.cpp:209 ../../Firmware/menu.cpp:221
-#: ../../Firmware/messages.cpp:59
+#: ../../Firmware/messages.cpp:60
 msgid "Sheet"
 msgstr "Skiva"
 
@@ -1684,7 +1685,7 @@ msgid "Show end stops"
 msgstr "Visa ändlägen"
 
 #. MSG_SILENT c=7
-#: ../../Firmware/messages.cpp:102 ../../Firmware/ultralcd.cpp:4369
+#: ../../Firmware/messages.cpp:103 ../../Firmware/ultralcd.cpp:4369
 #: ../../Firmware/ultralcd.cpp:4464 ../../Firmware/ultralcd.cpp:5786
 msgid "Silent"
 msgstr "Tyst"
@@ -1709,19 +1710,19 @@ msgid "Some problem encountered, Z-leveling enforced ..."
 msgstr "Ett problem har uppstått, Z-nivellering utförs..."
 
 #. MSG_SORT c=7
-#: ../../Firmware/messages.cpp:135 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
 #: ../../Firmware/ultralcd.cpp:4412 ../../Firmware/ultralcd.cpp:4413
 msgid "Sort"
 msgstr "Sortera"
 
 #. MSG_SORTING_FILES c=20
 #: ../../Firmware/cardreader.cpp:862 ../../Firmware/cardreader.cpp:929
-#: ../../Firmware/messages.cpp:95
+#: ../../Firmware/messages.cpp:96
 msgid "Sorting files"
 msgstr "Sorterar filer"
 
 #. MSG_SOUND c=9
-#: ../../Firmware/messages.cpp:139 ../../Firmware/ultralcd.cpp:4458
+#: ../../Firmware/messages.cpp:140 ../../Firmware/ultralcd.cpp:4458
 #: ../../Firmware/ultralcd.cpp:4461 ../../Firmware/ultralcd.cpp:4464
 #: ../../Firmware/ultralcd.cpp:4467 ../../Firmware/ultralcd.cpp:4470
 msgid "Sound"
@@ -1733,7 +1734,7 @@ msgid "Speed"
 msgstr "Fart"
 
 #. MSG_SELFTEST_FAN_YES c=19
-#: ../../Firmware/messages.cpp:87 ../../Firmware/ultralcd.cpp:7174
+#: ../../Firmware/messages.cpp:88 ../../Firmware/ultralcd.cpp:7174
 #: ../../Firmware/ultralcd.cpp:7189 ../../Firmware/ultralcd.cpp:7197
 msgid "Spinning"
 msgstr "Rotation"
@@ -1749,25 +1750,25 @@ msgid "Statistics"
 msgstr "Statistik"
 
 #. MSG_STEALTH c=7
-#: ../../Firmware/messages.cpp:104 ../../Firmware/ultralcd.cpp:4346
+#: ../../Firmware/messages.cpp:105 ../../Firmware/ultralcd.cpp:4346
 #: ../../Firmware/ultralcd.cpp:4390 ../../Firmware/ultralcd.cpp:5778
 msgid "Stealth"
 msgstr "Tyst"
 
 #. MSG_STEEL_SHEETS c=18
-#: ../../Firmware/messages.cpp:60 ../../Firmware/ultralcd.cpp:4771
+#: ../../Firmware/messages.cpp:61 ../../Firmware/ultralcd.cpp:4771
 #: ../../Firmware/ultralcd.cpp:5424
 msgid "Steel sheets"
 msgstr "Metallskivor"
 
 #. MSG_STOP_PRINT c=18
-#: ../../Firmware/messages.cpp:106 ../../Firmware/ultralcd.cpp:5536
+#: ../../Firmware/messages.cpp:107 ../../Firmware/ultralcd.cpp:5536
 #: ../../Firmware/ultralcd.cpp:5995
 msgid "Stop print"
 msgstr "Stoppa utskriften"
 
 #. MSG_STRICT c=8
-#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4507
+#: ../../Firmware/messages.cpp:128 ../../Firmware/ultralcd.cpp:4507
 #: ../../Firmware/ultralcd.cpp:4589 ../../Firmware/ultralcd.cpp:4628
 #: ../../Firmware/ultralcd.cpp:4669
 msgid "Strict"
@@ -1784,7 +1785,7 @@ msgid "Swapped"
 msgstr "Utbytt"
 
 #. MSG_THERMAL_ANOMALY c=20
-#: ../../Firmware/messages.cpp:165 ../../Firmware/temperature.cpp:2442
+#: ../../Firmware/messages.cpp:166 ../../Firmware/temperature.cpp:2442
 msgid "THERMAL ANOMALY"
 msgstr ""
 
@@ -1819,7 +1820,7 @@ msgstr ""
 "optimal höjd. Kontrollera med bilderna i handboken (Kalibreringskapitlet)."
 
 #. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
-#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:42
+#: ../../Firmware/Marlin_main.cpp:1558 ../../Firmware/messages.cpp:43
 msgid ""
 "There is still a need to make Z calibration. Please follow the manual, "
 "chapter First steps, section Calibration flow."
@@ -1828,23 +1829,23 @@ msgstr ""
 "manualen, kapitel Första stegen, avsnitt Kalibreringsflöde."
 
 #. MSG_SORT_TIME c=8
-#: ../../Firmware/messages.cpp:136 ../../Firmware/ultralcd.cpp:4411
+#: ../../Firmware/messages.cpp:137 ../../Firmware/ultralcd.cpp:4411
 msgid "Time"
 msgstr "Tid"
 
 #. MSG_TIMEOUT c=12
-#: ../../Firmware/messages.cpp:153 ../../Firmware/ultralcd.cpp:5873
+#: ../../Firmware/messages.cpp:154 ../../Firmware/ultralcd.cpp:5873
 msgid "Timeout"
 msgstr ""
 
 #. MSG_TOTAL c=6
-#: ../../Firmware/messages.cpp:96 ../../Firmware/ultralcd.cpp:1157
+#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1157
 #: ../../Firmware/ultralcd.cpp:1305
 msgid "Total"
 msgstr ""
 
 #. MSG_TOTAL_FAILURES c=20
-#: ../../Firmware/messages.cpp:97 ../../Firmware/ultralcd.cpp:1200
+#: ../../Firmware/messages.cpp:98 ../../Firmware/ultralcd.cpp:1200
 #: ../../Firmware/ultralcd.cpp:1226 ../../Firmware/ultralcd.cpp:1336
 msgid "Total failures"
 msgstr "Totala misslyckanden"
@@ -1865,13 +1866,13 @@ msgid "Tune"
 msgstr "Ställ in"
 
 #. MSG_UNLOAD_FILAMENT c=18
-#: ../../Firmware/messages.cpp:110 ../../Firmware/ultralcd.cpp:5572
+#: ../../Firmware/messages.cpp:111 ../../Firmware/ultralcd.cpp:5572
 #: ../../Firmware/ultralcd.cpp:5586
 msgid "Unload filament"
 msgstr "Ta bort filament"
 
 #. MSG_UNLOADING_FILAMENT c=20
-#: ../../Firmware/messages.cpp:111 ../../Firmware/mmu.cpp:957
+#: ../../Firmware/messages.cpp:112 ../../Firmware/mmu.cpp:957
 #: ../../Firmware/ultralcd.cpp:5205
 msgid "Unloading filament"
 msgstr "Tar bort filament"
@@ -1915,7 +1916,7 @@ msgid "Waiting for nozzle and bed cooling"
 msgstr "Väntar på munstycks- och bäddkylning"
 
 #. MSG_WARN c=8
-#: ../../Firmware/messages.cpp:126 ../../Firmware/ultralcd.cpp:4504
+#: ../../Firmware/messages.cpp:127 ../../Firmware/ultralcd.cpp:4504
 #: ../../Firmware/ultralcd.cpp:4586 ../../Firmware/ultralcd.cpp:4625
 #: ../../Firmware/ultralcd.cpp:4666
 msgid "Warn"
@@ -1942,7 +1943,7 @@ msgid "Was filament unload successful?"
 msgstr "Lyckades filamentutmatningen?"
 
 #. MSG_SELFTEST_WIRINGERROR c=18
-#: ../../Firmware/messages.cpp:92 ../../Firmware/ultralcd.cpp:6981
+#: ../../Firmware/messages.cpp:93 ../../Firmware/ultralcd.cpp:6981
 #: ../../Firmware/ultralcd.cpp:6985 ../../Firmware/ultralcd.cpp:7005
 #: ../../Firmware/ultralcd.cpp:7011 ../../Firmware/ultralcd.cpp:7035
 msgid "Wiring error"
@@ -2014,7 +2015,7 @@ msgid "XYZ calibration failed. Left front calibration point not reachable."
 msgstr ""
 
 #. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
-#: ../../Firmware/messages.cpp:15 ../../Firmware/ultralcd.cpp:3304
+#: ../../Firmware/messages.cpp:16 ../../Firmware/ultralcd.cpp:3304
 #: ../../Firmware/ultralcd.cpp:3332
 msgid "XYZ calibration failed. Please consult the manual."
 msgstr "XYZ-kalibrering misslyckades. Se bruksanvisningen."
@@ -2041,7 +2042,7 @@ msgid "Y-correct:"
 msgstr "Y-korrektion:"
 
 #. MSG_YES c=4
-#: ../../Firmware/messages.cpp:119 ../../Firmware/ultralcd.cpp:2224
+#: ../../Firmware/messages.cpp:120 ../../Firmware/ultralcd.cpp:2224
 #: ../../Firmware/ultralcd.cpp:2808 ../../Firmware/ultralcd.cpp:3188
 #: ../../Firmware/ultralcd.cpp:4793 ../../Firmware/ultralcd.cpp:5997
 msgid "Yes"
@@ -2062,7 +2063,7 @@ msgid ""
 msgstr ""
 
 #. MSG_WIZARD_QUIT c=20 r=8
-#: ../../Firmware/messages.cpp:116 ../../Firmware/ultralcd.cpp:4195
+#: ../../Firmware/messages.cpp:117 ../../Firmware/ultralcd.cpp:4195
 msgid "You can always resume the Wizard from Calibration -> Wizard."
 msgstr "Du kan alltid återuppta guiden från Kalibrering -> Guide."
 
@@ -2072,7 +2073,7 @@ msgid "Z-correct:"
 msgstr "Z-korrekt:"
 
 #. MSG_Z_PROBE_NR c=14
-#: ../../Firmware/messages.cpp:145 ../../Firmware/ultralcd.cpp:5843
+#: ../../Firmware/messages.cpp:146 ../../Firmware/ultralcd.cpp:5843
 msgid "Z-probe nr."
 msgstr "Z-sond nr."
 
@@ -2102,12 +2103,12 @@ msgid "unknown"
 msgstr "okänd"
 
 #. MSG_IR_UNKNOWN c=18
-#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:161
+#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.cpp:162
 msgid "unknown state"
 msgstr "okänt tillstånd"
 
 #. MSG_REFRESH c=18
-#: ../../Firmware/messages.cpp:77 ../../Firmware/ultralcd.cpp:6085
+#: ../../Firmware/messages.cpp:78 ../../Firmware/ultralcd.cpp:6085
 #: ../../Firmware/ultralcd.cpp:6088
 msgid "🔃Refresh"
 msgstr "🔃Uppdatera"