 PavelSindler
|
241e32e691
Fixed "Shift out of range" bug in xyz calibration, status on demand added, temp reading disable in farm mode
|
преди 8 години |
|
PavelSindler
|
590cc8f3e8
German language added, updated spanish language messages, checking if Z live adjust is in allowed range, chcecking for invalid gcodes added, fixed bug in total print time, fixed selftest to avoid false triggering, added auto home after selftest, removed farm mode menu feature, added experimental functions for checking bed properties
|
преди 8 години |
|
PavelSindler
|
ebabaf527a
Added message at the beginning of xyz calibration, dont disable steppers during M0 and M1
|
преди 8 години |
|
PavelSindler
|
fcce374a14
initial version - merging from DEV multicolor
|
преди 8 години |
|
bubnikv
|
854b79de46
Implemented a calibration flow supporting the new & pre-built machines.
|
преди 8 години |
|
bubnikv
|
e0bb76032c
Reset live adjust on XYZ calibration.
|
преди 8 години |
|
bubnikv
|
77c24aa56e
Improvement in the mesh bed leveling routine: Z-lift before XY to home.
|
преди 8 години |
|
bubnikv
|
32c8e9c2dc
"Calibrate Z" was redefined to let the user move the X axis up
|
преди 9 години |
|
bubnikv
|
077560ce4c
Improvement of baby stepping:
|
преди 9 години |
|
bubnikv
|
403d71d902
Increased the "calibration point not found" threshold from 0.5mm to 1.mm
|
преди 9 години |
|
bubnikv
|
2e6e4542c9
Undo babystepping in Z before G28 / G80, if applied already.
|
преди 9 години |
|
bubnikv
|
d7c75f2060
Updated soft end stops with the skew calibration active.
|
преди 9 години |
|
bubnikv
|
a88c0a30e7
Fixed a non-C++ implementation of the PRUSA specific G-Codes.
|
преди 9 години |
|
bubnikv
|
1394e7efc6
Skew calibration: Yet another improvement of the search algorithm
|
преди 9 години |
|
bubnikv
|
58b2aa9fb8
Improvement of the bed skew calibration.
|
преди 9 години |
|
bubnikv
|
0389b23514
Rewrote the fitting routine of the induction sensor points to the measured points
|
преди 9 години |
|
bubnikv
|
677c13fc9a
Improved the bed auto calibration at the Y=0 edge of the bed.
|
преди 9 години |
|
bubnikv
|
80971237b8
Polished the bed skew and shift calibration.
|
преди 9 години |
|
bubnikv
|
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
|
преди 9 години |
|
bubnikv
|
d9da3c4c7f
Bugfix of the "Move Z carriages up" step.
|
преди 9 години |
|
bubnikv
|
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
|
преди 9 години |
