 michalprusa
|
be47a2b7c1
Serial receive timeout while in farm mode to prevent printer from stuck when some characters appears on serial line. Added status echo while waiting for filament.
|
%!s(int64=9) %!d(string=hai) anos |
|
michalprusa
|
3c1349a746
XYZ calibration output strings typo fixed X/Z -> X/Y in EN language and XYZ -> X/Y in IT
|
%!s(int64=9) %!d(string=hai) anos |
|
michalprusa
|
11dac765e7
Language selection menu moved to marlin_main before printer calibration test.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
88bffa5341
Corrected a mistake in the previous check-in.
|
%!s(int64=9) %!d(string=hai) anos |
|
Vojtech Bubnik
|
232662ff47
Fixed a valid limit in the bed correction menu. Removed st_synchronize() where it does not have any effect
|
%!s(int64=9) %!d(string=hai) anos |
|
michalprusa
|
4e61ac2eb1
Different calibrate Z string and finally arduino addons added.
|
%!s(int64=9) %!d(string=hai) anos |
|
michalprusa
|
053c727fed
Bed MINTEMP implemented, MAXTEMP behaviour changed, loading filament bug fixed, Extruder max feedrate increased and Italian language strings fix.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
5c119501c0
Shortened some long Italian texts.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
ea646dce10
Update of Spanish and Italian.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
935c42fb6d
Updated the Polish language file.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
52fc724cb4
Menu reorganized.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
32c8e9c2dc
"Calibrate Z" was redefined to let the user move the X axis up
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
f9f9912fff
Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
d1df7f931c
Unused experimental Prusa3D specific G8X G-codes disabled.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
4c6ea5af94
Fixed crashes when one moved the axes from the menu many times
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
805cdadb6f
Show "Calibrating nth point" on the display when running G80
|
%!s(int64=9) %!d(string=hai) anos |
|
Vojtech Bubnik
|
a154fc1691
Merge branch 'MK2' of https://github.com/Prusa3D/Prusa-Firmware into MK2
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
077560ce4c
Improvement of baby stepping:
|
%!s(int64=9) %!d(string=hai) anos |
|
akukan
|
012e21d49d
Add files via upload
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
f17aa3b0a2
Adjusted the maximum acceleration of the Z axis to a sensible value
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
7355589119
Added a test for a broken PINDA cable during G80.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
018c1b1fad
Multiline lcd_show_fullscreen_message_and_wait_P() function.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
403d71d902
Increased the "calibration point not found" threshold from 0.5mm to 1.mm
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
d00b4a2c75
Reworked the calculation of jerks in the planner.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
986b286803
Reworked calculation of the trapezoidal ramps inside the planner.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
5c56e472fe
Show the Toshiba FlashAir IP address in the menu.
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
2e66fdf84a
Merge branch 'MK2' of https://github.com/Prusa3D/Prusa-Firmware into MK2
|
%!s(int64=9) %!d(string=hai) anos |
|
bubnikv
|
562c089e17
Initial implementation of the Toshiba FlashAir support:
|
%!s(int64=9) %!d(string=hai) anos |
|
akukan
|
c8c92f8ae5
PLA preheat settings for MK2 set to 215/55
|
%!s(int64=9) %!d(string=hai) anos |
|
akukan
|
e9910a9078
Print farm confirmation
|
%!s(int64=9) %!d(string=hai) anos |
