 PavelSindler
|
ebabaf527a
Added message at the beginning of xyz calibration, dont disable steppers during M0 and M1
|
%!s(int64=8) %!d(string=hai) anos |
|
PavelSindler
|
fcce374a14
initial version - merging from DEV multicolor
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
854b79de46
Implemented a calibration flow supporting the new & pre-built machines.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
e0bb76032c
Reset live adjust on XYZ calibration.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
77c24aa56e
Improvement in the mesh bed leveling routine: Z-lift before XY to home.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
32c8e9c2dc
"Calibrate Z" was redefined to let the user move the X axis up
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
077560ce4c
Improvement of baby stepping:
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
403d71d902
Increased the "calibration point not found" threshold from 0.5mm to 1.mm
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
2e6e4542c9
Undo babystepping in Z before G28 / G80, if applied already.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
d7c75f2060
Updated soft end stops with the skew calibration active.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
a88c0a30e7
Fixed a non-C++ implementation of the PRUSA specific G-Codes.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
1394e7efc6
Skew calibration: Yet another improvement of the search algorithm
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
58b2aa9fb8
Improvement of the bed skew calibration.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
0389b23514
Rewrote the fitting routine of the induction sensor points to the measured points
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
677c13fc9a
Improved the bed auto calibration at the Y=0 edge of the bed.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
80971237b8
Polished the bed skew and shift calibration.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
d9da3c4c7f
Bugfix of the "Move Z carriages up" step.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
|
%!s(int64=8) %!d(string=hai) anos |
