PavelSindler
|
241e32e691
Fixed "Shift out of range" bug in xyz calibration, status on demand added, temp reading disable in farm mode
|
8 jaren geleden |
PavelSindler
|
590cc8f3e8
German language added, updated spanish language messages, checking if Z live adjust is in allowed range, chcecking for invalid gcodes added, fixed bug in total print time, fixed selftest to avoid false triggering, added auto home after selftest, removed farm mode menu feature, added experimental functions for checking bed properties
|
8 jaren geleden |
PavelSindler
|
ebabaf527a
Added message at the beginning of xyz calibration, dont disable steppers during M0 and M1
|
8 jaren geleden |
PavelSindler
|
fcce374a14
initial version - merging from DEV multicolor
|
8 jaren geleden |
bubnikv
|
854b79de46
Implemented a calibration flow supporting the new & pre-built machines.
|
8 jaren geleden |
bubnikv
|
e0bb76032c
Reset live adjust on XYZ calibration.
|
8 jaren geleden |
bubnikv
|
77c24aa56e
Improvement in the mesh bed leveling routine: Z-lift before XY to home.
|
8 jaren geleden |
bubnikv
|
32c8e9c2dc
"Calibrate Z" was redefined to let the user move the X axis up
|
9 jaren geleden |
bubnikv
|
077560ce4c
Improvement of baby stepping:
|
9 jaren geleden |
bubnikv
|
403d71d902
Increased the "calibration point not found" threshold from 0.5mm to 1.mm
|
9 jaren geleden |
bubnikv
|
2e6e4542c9
Undo babystepping in Z before G28 / G80, if applied already.
|
9 jaren geleden |
bubnikv
|
d7c75f2060
Updated soft end stops with the skew calibration active.
|
9 jaren geleden |
bubnikv
|
a88c0a30e7
Fixed a non-C++ implementation of the PRUSA specific G-Codes.
|
9 jaren geleden |
bubnikv
|
1394e7efc6
Skew calibration: Yet another improvement of the search algorithm
|
9 jaren geleden |
bubnikv
|
58b2aa9fb8
Improvement of the bed skew calibration.
|
9 jaren geleden |
bubnikv
|
0389b23514
Rewrote the fitting routine of the induction sensor points to the measured points
|
9 jaren geleden |
bubnikv
|
677c13fc9a
Improved the bed auto calibration at the Y=0 edge of the bed.
|
9 jaren geleden |
bubnikv
|
80971237b8
Polished the bed skew and shift calibration.
|
9 jaren geleden |
bubnikv
|
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
|
9 jaren geleden |
bubnikv
|
d9da3c4c7f
Bugfix of the "Move Z carriages up" step.
|
9 jaren geleden |
bubnikv
|
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
|
9 jaren geleden |