 Andre Sklenar
|
83dbcc2985
main: ignore handling of 'N' symbols (line number) when dealing with special PRUSA commands
|
%!s(int64=8) %!d(string=hai) anos |
|
Michal Průša
|
8f3f10765a
Merge branch 'MK2' into MK2
|
%!s(int64=8) %!d(string=hai) anos |
|
michalprusa
|
734ca2eb43
Added link monitor to farm mode
|
%!s(int64=8) %!d(string=hai) anos |
|
Andre Sklenar
|
16e34501a0
main: remove features that are not complete yet
|
%!s(int64=8) %!d(string=hai) anos |
|
Andre Sklenar
|
c58453a726
main: add chunk write to sd card
|
%!s(int64=8) %!d(string=hai) anos |
|
michalprusa
|
977b58269a
Soft factory reset does not reset Live Adjust Z to 0
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
854b79de46
Implemented a calibration flow supporting the new & pre-built machines.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
e0bb76032c
Reset live adjust on XYZ calibration.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
77c24aa56e
Improvement in the mesh bed leveling routine: Z-lift before XY to home.
|
%!s(int64=8) %!d(string=hai) anos |
|
michalprusa
|
be47a2b7c1
Serial receive timeout while in farm mode to prevent printer from stuck when some characters appears on serial line. Added status echo while waiting for filament.
|
%!s(int64=8) %!d(string=hai) anos |
|
michalprusa
|
11dac765e7
Language selection menu moved to marlin_main before printer calibration test.
|
%!s(int64=8) %!d(string=hai) anos |
|
michalprusa
|
4e61ac2eb1
Different calibrate Z string and finally arduino addons added.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
52fc724cb4
Menu reorganized.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
32c8e9c2dc
"Calibrate Z" was redefined to let the user move the X axis up
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
f9f9912fff
Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
d1df7f931c
Unused experimental Prusa3D specific G8X G-codes disabled.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
805cdadb6f
Show "Calibrating nth point" on the display when running G80
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
077560ce4c
Improvement of baby stepping:
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
7355589119
Added a test for a broken PINDA cable during G80.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
403d71d902
Increased the "calibration point not found" threshold from 0.5mm to 1.mm
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
d00b4a2c75
Reworked the calculation of jerks in the planner.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
986b286803
Reworked calculation of the trapezoidal ramps inside the planner.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
2e66fdf84a
Merge branch 'MK2' of https://github.com/Prusa3D/Prusa-Firmware into MK2
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
562c089e17
Initial implementation of the Toshiba FlashAir support:
|
%!s(int64=8) %!d(string=hai) anos |
|
akukan
|
1b2676baac
Farm monitoring
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
ea6a948c6b
Removed the dual carriage code for readibility.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
2e6e4542c9
Undo babystepping in Z before G28 / G80, if applied already.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
d825c5ffac
Write the current firmware version into first 8 bytes of the EEPROM,
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
d4e332112b
Reset babystepping value on startup, if the Z live adjust is off.
|
%!s(int64=8) %!d(string=hai) anos |
|
bubnikv
|
591e81777a
"Printer has not been calibrated yet, calibrate Z" message on startup,
|
%!s(int64=8) %!d(string=hai) anos |
