 PavelSindler
|
3017decb9a
fixed undesirable farm mode activation after flashing new firmware
|
8 سال پیش |
|
PavelSindler
|
7ad319a16a
farm mode: printer sends farm number and status, no ping acoustic allert
|
8 سال پیش |
|
PavelSindler
|
608717d110
farm mode: detection if printer is connected to monitoring, PRN1 sends also farm number
|
8 سال پیش |
|
PavelSindler
|
5d217f419c
disable farm mode confirmation added
|
8 سال پیش |
|
PavelSindler
|
99c201dba2
farm mode disable from menu added, farm number value remains after activating farm mode, wider farm numbers range
|
8 سال پیش |
|
PavelSindler
|
37e4035f42
changed version number
|
8 سال پیش |
|
PavelSindler
|
9eb9b0c015
version number changed
|
8 سال پیش |
|
PavelSindler
|
241e32e691
Fixed "Shift out of range" bug in xyz calibration, status on demand added, temp reading disable in farm mode
|
8 سال پیش |
|
PavelSindler
|
590cc8f3e8
German language added, updated spanish language messages, checking if Z live adjust is in allowed range, chcecking for invalid gcodes added, fixed bug in total print time, fixed selftest to avoid false triggering, added auto home after selftest, removed farm mode menu feature, added experimental functions for checking bed properties
|
8 سال پیش |
|
PavelSindler
|
ebabaf527a
Added message at the beginning of xyz calibration, dont disable steppers during M0 and M1
|
8 سال پیش |
|
PavelSindler
|
047f2a8389
Added writing flag to EEPROM, that we started/finished print to detect printer reset and need for filaments adjustment.
|
8 سال پیش |
|
PavelSindler
|
fcce374a14
initial version - merging from DEV multicolor
|
8 سال پیش |
|
michalprusa
|
5169c17d2f
Version increment
|
8 سال پیش |
|
michalprusa
|
0e7b4d3d3c
Firmware version iterated, fan selftest strings ported to all languages.
|
8 سال پیش |
|
bubnikv
|
854b79de46
Implemented a calibration flow supporting the new & pre-built machines.
|
8 سال پیش |
|
bubnikv
|
e0bb76032c
Reset live adjust on XYZ calibration.
|
8 سال پیش |
|
akukan
|
078d883416
Firmware version updated to 3.0.7
|
8 سال پیش |
|
michalprusa
|
053c727fed
Bed MINTEMP implemented, MAXTEMP behaviour changed, loading filament bug fixed, Extruder max feedrate increased and Italian language strings fix.
|
9 سال پیش |
|
bubnikv
|
52fc724cb4
Menu reorganized.
|
9 سال پیش |
|
bubnikv
|
f9f9912fff
Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops.
|
9 سال پیش |
|
bubnikv
|
077560ce4c
Improvement of baby stepping:
|
9 سال پیش |
|
bubnikv
|
7355589119
Added a test for a broken PINDA cable during G80.
|
9 سال پیش |
|
bubnikv
|
d00b4a2c75
Reworked the calculation of jerks in the planner.
|
9 سال پیش |
|
akukan
|
1b2676baac
Farm monitoring
|
9 سال پیش |
|
bubnikv
|
3c21438392
In addition to the firmware version number, store the "PRUSA3D"
|
9 سال پیش |
|
bubnikv
|
58b2aa9fb8
Improvement of the bed skew calibration.
|
9 سال پیش |
|
bubnikv
|
c24f3369d7
Fixed a bug in babystepping: The babystep value will be written to EEPROM
|
9 سال پیش |
|
bubnikv
|
78ebd522b6
Removed support for DELTA, SCARA and BARICUDA.
|
9 سال پیش |
|
bubnikv
|
d9da3c4c7f
Bugfix of the "Move Z carriages up" step.
|
9 سال پیش |
|
bubnikv
|
6cff4b92ff
Automatic bed calibration by searching the 3x3 point matrix.
|
9 سال پیش |
