//! @file //! @date Aug 28, 2019 //! @author mkbel //! @brief LCD #include "temperature.h" #include "ultralcd.h" #include "fsensor.h" #include "Marlin.h" #include "language.h" #include "cardreader.h" #include "temperature.h" #include "stepper.h" #include "ConfigurationStore.h" #include "printers.h" #include #include "lcd.h" #include "menu.h" #include "backlight.h" #include "util.h" #include "mesh_bed_leveling.h" #include "mesh_bed_calibration.h" //#include "Configuration.h" #include "cmdqueue.h" #include "SdFatUtil.h" #ifdef FILAMENT_SENSOR #include "pat9125.h" #include "fsensor.h" #endif //FILAMENT_SENSOR #ifdef TMC2130 #include "tmc2130.h" #endif //TMC2130 #include "sound.h" #include "mmu.h" #include "static_assert.h" #include "first_lay_cal.h" #include "fsensor.h" #include "adc.h" #include "config.h" #ifndef LA_NOCOMPAT #include "la10compat.h" #endif int scrollstuff = 0; char longFilenameOLD[LONG_FILENAME_LENGTH]; int clock_interval = 0; static void lcd_sd_updir(); static void lcd_mesh_bed_leveling_settings(); static void lcd_backlight_menu(); //int8_t ReInitLCD = 0; int8_t SilentModeMenu = SILENT_MODE_OFF; uint8_t SilentModeMenu_MMU = 1; //activate mmu unit stealth mode int8_t FSensorStateMenu = 1; #ifdef IR_SENSOR_ANALOG bool bMenuFSDetect=false; #endif //IR_SENSOR_ANALOG LcdCommands lcd_commands_type = LcdCommands::Idle; static uint8_t lcd_commands_step = 0; CustomMsg custom_message_type = CustomMsg::Status; unsigned int custom_message_state = 0; bool isPrintPaused = false; uint8_t farm_mode = 0; int farm_timer = 8; uint8_t farm_status = 0; bool printer_connected = true; unsigned long display_time; //just timer for showing pid finished message on lcd; float pid_temp = DEFAULT_PID_TEMP; static bool forceMenuExpire = false; static bool lcd_autoDeplete; static float manual_feedrate[] = MANUAL_FEEDRATE; /* !Configuration settings */ uint8_t lcd_status_message_level; char lcd_status_message[LCD_WIDTH + 1] = ""; //////WELCOME! unsigned char firstrun = 1; static uint8_t lay1cal_filament = 0; static const char separator[] PROGMEM = "--------------------"; /** forward declarations **/ static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines); // void copy_and_scalePID_i(); // void copy_and_scalePID_d(); /* Different menus */ //static void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()") #if (LANG_MODE != 0) static void lcd_language_menu(); #endif static void lcd_main_menu(); static void lcd_tune_menu(); //static void lcd_move_menu(); static void lcd_settings_menu(); static void lcd_calibration_menu(); static void lcd_control_temperature_menu(); static void lcd_settings_linearity_correction_menu_save(); static void prusa_stat_printerstatus(int _status); static void prusa_stat_farm_number(); static void prusa_stat_diameter(); static void prusa_stat_temperatures(); static void prusa_stat_printinfo(); static void lcd_menu_xyz_y_min(); static void lcd_menu_xyz_skew(); static void lcd_menu_xyz_offset(); static void lcd_menu_fails_stats_mmu(); static void lcd_menu_fails_stats_mmu_print(); static void lcd_menu_fails_stats_mmu_total(); static void mmu_unload_filament(); static void lcd_v2_calibration(); //static void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()") static void mmu_fil_eject_menu(); static void mmu_load_to_nozzle_menu(); static void preheat_or_continue(); #ifdef MMU_HAS_CUTTER static void mmu_cut_filament_menu(); #endif //MMU_HAS_CUTTER #if defined(TMC2130) || defined(FILAMENT_SENSOR) static void lcd_menu_fails_stats(); #endif //TMC2130 or FILAMENT_SENSOR #ifdef TMC2130 static void lcd_belttest_v(); #endif //TMC2130 static void lcd_selftest_v(); #ifdef TMC2130 static void reset_crash_det(unsigned char axis); static bool lcd_selfcheck_axis_sg(unsigned char axis); static bool lcd_selfcheck_axis(int _axis, int _travel); #else static bool lcd_selfcheck_axis(int _axis, int _travel); static bool lcd_selfcheck_pulleys(int axis); #endif //TMC2130 static bool lcd_selfcheck_endstops(); static bool lcd_selfcheck_check_heater(bool _isbed); enum class TestScreen : uint_least8_t { ExtruderFan, PrintFan, FansOk, EndStops, AxisX, AxisY, AxisZ, Bed, Hotend, HotendOk, Fsensor, FsensorOk, AllCorrect, Failed, Home, }; enum class TestError : uint_least8_t { Heater, Bed, Endstops, Motor, Endstop, PrintFan, ExtruderFan, Pulley, Axis, SwappedFan, WiringFsensor, TriggeringFsensor, FsensorLevel }; static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay); static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name, const char *_indicator); static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite, bool _default=false); #ifdef FANCHECK /** Enumerate for lcd_selftest_fan_auto function. */ enum class FanCheck : uint_least8_t { Success, PrintFan, ExtruderFan, SwappedFan, }; /** * Try to check fan working and wiring. * * @param _fan i fan number 0 means extruder fan, 1 means print fan. * * @returns a TestError noerror, extruderFan, printFan or swappedFan. */ static FanCheck lcd_selftest_fan_auto(int _fan); #endif //FANCHECK #ifdef PAT9125 static bool lcd_selftest_fsensor(); #endif //PAT9125 static bool selftest_irsensor(); #ifdef IR_SENSOR_ANALOG static bool lcd_selftest_IRsensor(bool bStandalone=false); static void lcd_detect_IRsensor(); #endif //IR_SENSOR_ANALOG static void lcd_selftest_error(TestError error, const char *_error_1, const char *_error_2); static void lcd_colorprint_change(); #ifdef SNMM static int get_ext_nr(); #endif //SNMM #if defined (SNMM) || defined(SNMM_V2) static void fil_load_menu(); static void fil_unload_menu(); #endif // SNMM || SNMM_V2 static void lcd_disable_farm_mode(); static void lcd_set_fan_check(); static void lcd_cutter_enabled(); #ifdef SNMM static char snmm_stop_print_menu(); #endif //SNMM #ifdef SDCARD_SORT_ALPHA static void lcd_sort_type_set(); #endif static void lcd_babystep_z(); static void lcd_send_status(); #ifdef FARM_CONNECT_MESSAGE static void lcd_connect_printer(); #endif //FARM_CONNECT_MESSAGE //! Beware: has side effects - forces lcd_draw_update to 2, which means clear the display void lcd_finishstatus(); static void lcd_sdcard_menu(); static void lcd_sheet_menu(); #ifdef DELTA_CALIBRATION_MENU static void lcd_delta_calibrate_menu(); #endif // DELTA_CALIBRATION_MENU /* Different types of actions that can be used in menu items. */ static void menu_action_sdfile(const char* filename); static void menu_action_sddirectory(const char* filename); #define ENCODER_FEEDRATE_DEADZONE 10 #define STATE_NA 255 #define STATE_OFF 0 #define STATE_ON 1 /* #define MENU_ITEM(type, label, args...) do { \ if (menu_item == menu_line) { \ if (lcd_draw_update) { \ const char* _label_pstr = (label); \ if (lcd_encoder == menu_item) { \ lcd_implementation_drawmenu_ ## type ## _selected (menu_row, _label_pstr , ## args ); \ }else{\ lcd_implementation_drawmenu_ ## type (menu_row, _label_pstr , ## args ); \ }\ }\ if (menu_clicked && (lcd_encoder == menu_item)) {\ lcd_quick_feedback(); \ menu_action_ ## type ( args ); \ return;\ }\ }\ menu_item++;\ } while(0) */ #if (SDCARDDETECT > 0) bool lcd_oldcardstatus; #endif uint8_t selected_sheet = 0; bool ignore_click = false; bool wait_for_unclick; // place-holders for Ki and Kd edits #ifdef PIDTEMP // float raw_Ki, raw_Kd; #endif bool bMain; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function const char STR_SEPARATOR[] PROGMEM = "------------"; static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* filename, char* longFilename) { char c; int enc_dif = lcd_encoder_diff / ENCODER_PULSES_PER_STEP; uint8_t n = LCD_WIDTH - 1; for(uint_least8_t g = 0; g<4;g++){ lcd_putc_at(0, g, ' '); } lcd_putc_at(0, row, '>'); if (longFilename[0] == '\0') { longFilename = filename; } int i = 1; int j = 0; char* longFilenameTMP = longFilename; while((c = *longFilenameTMP) != '\0') { lcd_set_cursor(i, row); lcd_print(c); i++; longFilenameTMP++; if(i==LCD_WIDTH){ i=1; j++; longFilenameTMP = longFilename + j; n = LCD_WIDTH - 1; for(int g = 0; g<300 ;g++){ manage_heater(); if(LCD_CLICKED || ( enc_dif != (lcd_encoder_diff / ENCODER_PULSES_PER_STEP))){ longFilenameTMP = longFilename; *(longFilenameTMP + LCD_WIDTH - 2) = '\0'; i = 1; j = 0; break; }else{ if (j == 1) _delay_ms(3); //wait around 1.2 s to start scrolling text _delay_ms(1); //then scroll with redrawing every 300 ms } } } } if(c!='\0'){ lcd_putc_at(i, row, c); i++; } n=n-i+1; lcd_space(n); } static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* filename, char* longFilename) { char c; uint8_t n = LCD_WIDTH - 1; lcd_putc_at(0, row, ' '); if (longFilename[0] != '\0') { filename = longFilename; longFilename[LCD_WIDTH-1] = '\0'; } while( ((c = *filename) != '\0') && (n>0) ) { lcd_print(c); filename++; n--; } lcd_space(n); } static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* filename, char* longFilename) { char c; uint8_t n = LCD_WIDTH - 2; lcd_putc_at(0, row, '>'); lcd_print(LCD_STR_FOLDER[0]); if (longFilename[0] != '\0') { filename = longFilename; longFilename[LCD_WIDTH-2] = '\0'; } while( ((c = *filename) != '\0') && (n>0) ) { lcd_print(c); filename++; n--; } lcd_space(n); } static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* filename, char* longFilename) { char c; uint8_t n = LCD_WIDTH - 2; lcd_putc_at(0, row, ' '); lcd_print(LCD_STR_FOLDER[0]); if (longFilename[0] != '\0') { filename = longFilename; longFilename[LCD_WIDTH-2] = '\0'; } while( ((c = *filename) != '\0') && (n>0) ) { lcd_print(c); filename++; n--; } lcd_space(n); } #define MENU_ITEM_SDDIR(str_fn, str_fnl) do { if (menu_item_sddir(str_fn, str_fnl)) return; } while (0) //#define MENU_ITEM_SDDIR(str, str_fn, str_fnl) MENU_ITEM(sddirectory, str, str_fn, str_fnl) //extern uint8_t menu_item_sddir(const char* str, const char* str_fn, char* str_fnl); #define MENU_ITEM_SDFILE(str, str_fn, str_fnl) do { if (menu_item_sdfile(str, str_fn, str_fnl)) return; } while (0) //#define MENU_ITEM_SDFILE(str, str_fn, str_fnl) MENU_ITEM(sdfile, str, str_fn, str_fnl) //extern uint8_t menu_item_sdfile(const char* str, const char* str_fn, char* str_fnl); uint8_t menu_item_sddir(const char* str_fn, char* str_fnl) { #ifdef NEW_SD_MENU // str_fnl[18] = 0; // printf_P(PSTR("menu dir %d '%s' '%s'\n"), menu_row, str_fn, str_fnl); if (menu_item == menu_line) { if (lcd_draw_update) { lcd_set_cursor(0, menu_row); int cnt = lcd_printf_P(PSTR("%c%c%-18s"), (lcd_encoder == menu_item)?'>':' ', LCD_STR_FOLDER[0], str_fnl[0]?str_fnl:str_fn); // int cnt = lcd_printf_P(PSTR("%c%c%-18s"), (lcd_encoder == menu_item)?'>':' ', LCD_STR_FOLDER[0], str_fn); } if (menu_clicked && (lcd_encoder == menu_item)) { uint8_t depth = (uint8_t)card.getWorkDirDepth(); strcpy(dir_names[depth], str_fn); // printf_P(PSTR("%s\n"), dir_names[depth]); card.chdir(str_fn); lcd_encoder = 0; return menu_item_ret(); } } menu_item++; return 0; #else //NEW_SD_MENU if (menu_item == menu_line) { if (lcd_draw_update) { if (lcd_encoder == menu_item) lcd_implementation_drawmenu_sddirectory_selected(menu_row, str_fn, str_fnl); else lcd_implementation_drawmenu_sddirectory(menu_row, str_fn, str_fnl); } if (menu_clicked && (lcd_encoder == menu_item)) { menu_clicked = false; lcd_update_enabled = 0; menu_action_sddirectory(str_fn); lcd_update_enabled = 1; return menu_item_ret(); } } menu_item++; return 0; #endif //NEW_SD_MENU } static uint8_t menu_item_sdfile(const char* #ifdef NEW_SD_MENU str #endif //NEW_SD_MENU ,const char* str_fn, char* str_fnl) { #ifdef NEW_SD_MENU // printf_P(PSTR("menu sdfile\n")); // str_fnl[19] = 0; // printf_P(PSTR("menu file %d '%s' '%s'\n"), menu_row, str_fn, str_fnl); if (menu_item == menu_line) { if (lcd_draw_update) { // printf_P(PSTR("menu file %d %d '%s'\n"), menu_row, menuData.sdcard_menu.viewState, str_fnl[0]?str_fnl:str_fn); lcd_set_cursor(0, menu_row); /* if (lcd_encoder == menu_item) { lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 1); if (menuData.sdcard_menu.viewState == 0) { menuData.sdcard_menu.viewState++; lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 1); } else if (menuData.sdcard_menu.viewState == 1) { lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', (str_fnl[0]?str_fnl:str_fn) + 2); } } else*/ { str_fnl[19] = 0; lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', str_fnl[0]?str_fnl:str_fn); } // int cnt = lcd_printf_P(PSTR("%c%-19s"), (lcd_encoder == menu_item)?'>':' ', str_fnl); // int cnt = lcd_printf_P(PSTR("%cTESTIK.gcode"), (lcd_encoder == menu_item)?'>':' '); } if (menu_clicked && (lcd_encoder == menu_item)) { return menu_item_ret(); } } menu_item++; return 0; #else //NEW_SD_MENU if (menu_item == menu_line) { if (lcd_draw_update) { if (lcd_encoder == menu_item) lcd_implementation_drawmenu_sdfile_selected(menu_row, str_fn, str_fnl); else lcd_implementation_drawmenu_sdfile(menu_row, str_fn, str_fnl); } if (menu_clicked && (lcd_encoder == menu_item)) { lcd_consume_click(); menu_action_sdfile(str_fn); return menu_item_ret(); } } menu_item++; return 0; #endif //NEW_SD_MENU } // Print temperature (nozzle/bed) (11 chars total) void lcdui_print_temp(char type, float val_current, int val_target) { int chars = lcd_printf_P(_N("%c%5.1f/%d%c"), type, val_current, val_target, LCD_STR_DEGREE[0]); lcd_space(11 - chars); } // Print Z-coordinate (8 chars total) void lcdui_print_Z_coord(void) { if (custom_message_type == CustomMsg::MeshBedLeveling) lcd_puts_P(_N("Z --- ")); else lcd_printf_P(_N("Z%6.2f%c"), current_position[Z_AXIS], axis_known_position[Z_AXIS]?' ':'?'); } #ifdef PLANNER_DIAGNOSTICS // Print planner diagnostics (8 chars total) void lcdui_print_planner_diag(void) { lcd_set_cursor(LCD_WIDTH - 8-2, 1); lcd_print(LCD_STR_FEEDRATE[0]); lcd_print(itostr3(feedmultiply)); lcd_puts_P(PSTR("% Q")); { uint8_t queue = planner_queue_min(); if (queue < (BLOCK_BUFFER_SIZE >> 1)) lcd_putc('!'); else { lcd_putc((char)(queue / 10) + '0'); queue %= 10; } lcd_putc((char)queue + '0'); planner_queue_min_reset(); } } #endif // PLANNER_DIAGNOSTICS // Print feedrate (8 chars total) void lcdui_print_feedrate(void) { int chars = lcd_printf_P(_N("%c%3d%%"), LCD_STR_FEEDRATE[0], feedmultiply); lcd_space(8 - chars); } // Print percent done in form "USB---%", " SD---%", " ---%" (7 chars total) void lcdui_print_percent_done(void) { const char* src = is_usb_printing?_N("USB"):(IS_SD_PRINTING?_N(" SD"):_N(" ")); char per[4]; bool num = IS_SD_PRINTING || (PRINTER_ACTIVE && (print_percent_done_normal != PRINT_PERCENT_DONE_INIT)); if (!num || heating_status) // either not printing or heating { const int8_t sheetNR = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)); const int8_t nextSheet = eeprom_next_initialized_sheet(sheetNR); if ((nextSheet >= 0) && (sheetNR != nextSheet)) { char sheet[8]; eeprom_read_block(sheet, EEPROM_Sheets_base->s[sheetNR].name, 7); sheet[7] = '\0'; lcd_printf_P(PSTR("%-7s"),sheet); return; //do not also print the percentage } } sprintf_P(per, num?_N("%3hhd"):_N("---"), calc_percent_done()); lcd_printf_P(_N("%3S%3s%%"), src, per); } // Print extruder status (5 chars total) void lcdui_print_extruder(void) { int chars = 0; if (mmu_extruder == tmp_extruder) { if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" F?")); else chars = lcd_printf_P(_N(" F%u"), mmu_extruder + 1); } else { if (mmu_extruder == MMU_FILAMENT_UNKNOWN) chars = lcd_printf_P(_N(" ?>%u"), tmp_extruder + 1); else chars = lcd_printf_P(_N(" %u>%u"), mmu_extruder + 1, tmp_extruder + 1); } lcd_space(5 - chars); } // Print farm number (5 chars total) void lcdui_print_farm(void) { lcd_printf_P(_N(" FRM ")); } #ifdef CMD_DIAGNOSTICS // Print CMD queue diagnostic (8 chars total) void lcdui_print_cmd_diag(void) { lcd_set_cursor(LCD_WIDTH - 8 -1, 2); lcd_puts_P(PSTR(" C")); lcd_print(buflen); // number of commands in cmd buffer if (buflen < 9) lcd_print(' '); } #endif //CMD_DIAGNOSTICS // Print time (8 chars total) void lcdui_print_time(void) { //if remaining print time estimation is available print it else print elapsed time int chars = 0; if ((PRINTER_ACTIVE) && (starttime != 0)) { uint16_t print_t = 0; uint16_t print_tr = 0; uint16_t print_tc = 0; char suff = ' '; char suff_doubt = ' '; #ifdef TMC2130 if (SilentModeMenu != SILENT_MODE_OFF) { if (print_time_remaining_silent != PRINT_TIME_REMAINING_INIT) { print_tr = print_time_remaining_silent; } //#ifdef CLOCK_INTERVAL_TIME if (print_time_to_change_silent != PRINT_TIME_REMAINING_INIT) { print_tc = print_time_to_change_silent; } //#endif //CLOCK_INTERVAL_TIME } else { #endif //TMC2130 if (print_time_remaining_normal != PRINT_TIME_REMAINING_INIT) { print_tr = print_time_remaining_normal; } //#ifdef CLOCK_INTERVAL_TIME if (print_time_to_change_normal != PRINT_TIME_REMAINING_INIT) { print_tc = print_time_to_change_normal; } //#endif //CLOCK_INTERVAL_TIME #ifdef TMC2130 } #endif //TMC2130 //#ifdef CLOCK_INTERVAL_TIME if (clock_interval == CLOCK_INTERVAL_TIME*2) { clock_interval = 0; } clock_interval++; if (print_tc != 0 && clock_interval > CLOCK_INTERVAL_TIME) { print_t = print_tc; suff = 'C'; } else //#endif //CLOCK_INTERVAL_TIME if (print_tr != 0) { print_t = print_tr; suff = 'R'; } else { print_t = _millis() / 60000 - starttime / 60000; } if (feedmultiply != 100 && (print_t == print_tr || print_t == print_tc)) { suff_doubt = '?'; print_t = 100ul * print_t / feedmultiply; } if (print_t < 6000) //time<100h chars = lcd_printf_P(_N("%c%02u:%02u%c%c"), LCD_STR_CLOCK[0], print_t / 60, print_t % 60, suff, suff_doubt); else //time>=100h chars = lcd_printf_P(_N("%c%3uh %c%c"), LCD_STR_CLOCK[0], print_t / 60, suff, suff_doubt); } else chars = lcd_printf_P(_N("%c--:-- "), LCD_STR_CLOCK[0]); lcd_space(8 - chars); } //Print status line on status screen void lcdui_print_status_line(void) { if (IS_SD_PRINTING) { if (strcmp(longFilenameOLD, (card.longFilename[0] ? card.longFilename : card.filename)) != 0) { memset(longFilenameOLD, '\0', strlen(longFilenameOLD)); sprintf_P(longFilenameOLD, PSTR("%s"), (card.longFilename[0] ? card.longFilename : card.filename)); scrollstuff = 0; } } if (heating_status) { // If heating flag, show progress of heating heating_status_counter++; if (heating_status_counter > 13) { heating_status_counter = 0; } lcd_set_cursor(7, 3); lcd_space(13); for (unsigned int dots = 0; dots < heating_status_counter; dots++) { lcd_putc_at(7 + dots, 3, '.'); } switch (heating_status) { case 1: lcd_puts_at_P(0, 3, _T(MSG_HEATING)); break; case 2: lcd_puts_at_P(0, 3, _T(MSG_HEATING_COMPLETE)); heating_status = 0; heating_status_counter = 0; break; case 3: lcd_puts_at_P(0, 3, _T(MSG_BED_HEATING)); break; case 4: lcd_puts_at_P(0, 3, _T(MSG_BED_DONE)); heating_status = 0; heating_status_counter = 0; break; default: break; } } else if ((IS_SD_PRINTING) && (custom_message_type == CustomMsg::Status)) { // If printing from SD, show what we are printing if(strlen(longFilenameOLD) > LCD_WIDTH) { int inters = 0; int gh = scrollstuff; while (((gh - scrollstuff) < LCD_WIDTH) && (inters == 0)) { if (longFilenameOLD[gh] == '\0') { lcd_set_cursor(gh - scrollstuff, 3); lcd_print(longFilenameOLD[gh - 1]); scrollstuff = 0; gh = scrollstuff; inters = 1; } else { lcd_set_cursor(gh - scrollstuff, 3); lcd_print(longFilenameOLD[gh - 1]); gh++; } } scrollstuff++; } else { lcd_printf_P(PSTR("%-20s"), longFilenameOLD); } } else { // Otherwise check for other special events switch (custom_message_type) { case CustomMsg::Status: // Nothing special, print status message normally lcd_print(lcd_status_message); break; case CustomMsg::MeshBedLeveling: // If mesh bed leveling in progress, show the status if (custom_message_state > 10) { lcd_set_cursor(0, 3); lcd_space(20); lcd_puts_at_P(0, 3, _T(MSG_CALIBRATE_Z_AUTO)); lcd_puts_P(PSTR(" : ")); lcd_print(custom_message_state-10); } else { if (custom_message_state == 3) { lcd_puts_P(_T(WELCOME_MSG)); lcd_setstatuspgm(_T(WELCOME_MSG)); custom_message_type = CustomMsg::Status; } if (custom_message_state > 3 && custom_message_state <= 10 ) { lcd_set_cursor(0, 3); lcd_space(19); lcd_puts_at_P(0, 3, _i("Calibration done"));////MSG_HOMEYZ_DONE custom_message_state--; } } break; case CustomMsg::FilamentLoading: // If loading filament, print status lcd_print(lcd_status_message); break; case CustomMsg::PidCal: // PID tuning in progress lcd_print(lcd_status_message); if (pid_cycle <= pid_number_of_cycles && custom_message_state > 0) { lcd_set_cursor(10, 3); lcd_print(itostr3(pid_cycle)); lcd_print('/'); lcd_print(itostr3left(pid_number_of_cycles)); } break; case CustomMsg::TempCal: // PINDA temp calibration in progress { char statusLine[LCD_WIDTH + 1]; sprintf_P(statusLine, PSTR("%-20S"), _T(MSG_TEMP_CALIBRATION)); char progress[4]; sprintf_P(progress, PSTR("%d/6"), custom_message_state); memcpy(statusLine + 12, progress, sizeof(progress) - 1); lcd_set_cursor(0, 3); lcd_print(statusLine); } break; case CustomMsg::TempCompPreheat: // temp compensation preheat lcd_puts_at_P(0, 3, _i("PINDA Heating"));////MSG_PINDA_PREHEAT c=20 r=1 if (custom_message_state <= PINDA_HEAT_T) { lcd_puts_P(PSTR(": ")); lcd_print(custom_message_state); //seconds lcd_print(' '); } break; } } // Fill the rest of line to have nice and clean output for(int fillspace = 0; fillspace < 20; fillspace++) if ((lcd_status_message[fillspace] <= 31 )) lcd_print(' '); } //! @brief Show Status Screen //! //! @code{.unparsed} //! ---------------------- //! |01234567890123456789| //! |N000.0/000D Z000.00| //! |B000.0/000D F100% | //! |USB100% T0 t--:-- | //! |Status line.........| //! ---------------------- //! N - nozzle temp symbol LCD_STR_THERMOMETER //! D - Degree sysmbol LCD_STR_DEGREE //! B - bed temp symbol LCD_STR_BEDTEMP //! F - feedrate symbol LCD_STR_FEEDRATE //! t - clock symbol LCD_STR_THERMOMETER //! @endcode void lcdui_print_status_screen(void) { lcd_set_cursor(0, 0); //line 0 //Print the hotend temperature (11 chars total) lcdui_print_temp(LCD_STR_THERMOMETER[0], degHotend(0), (int)(degTargetHotend(0) + 0.5)); lcd_space(2); //2 spaces //Print Z-coordinate (8 chars total) lcdui_print_Z_coord(); lcd_set_cursor(0, 1); //line 1 //Print the Bed temperature (11 chars total) lcdui_print_temp(LCD_STR_BEDTEMP[0], degBed(), (int)(degTargetBed() + 0.5)); lcd_space(2); //2 spaces #ifdef PLANNER_DIAGNOSTICS //Print planner diagnostics (8 chars) lcdui_print_planner_diag(); #else // PLANNER_DIAGNOSTICS //Print Feedrate (8 chars) lcdui_print_feedrate(); #endif // PLANNER_DIAGNOSTICS lcd_set_cursor(0, 2); //line 2 //Print SD status (7 chars) lcdui_print_percent_done(); if (mmu_enabled) //Print extruder status (5 chars) lcdui_print_extruder(); else if (farm_mode) //Print farm number (5 chars) lcdui_print_farm(); else lcd_space(5); //5 spaces #ifdef CMD_DIAGNOSTICS //Print cmd queue diagnostics (8chars) lcdui_print_cmd_diag(); #else //Print time (8chars) lcdui_print_time(); #endif //CMD_DIAGNOSTICS lcd_set_cursor(0, 3); //line 3 #ifndef DEBUG_DISABLE_LCD_STATUS_LINE lcdui_print_status_line(); #endif //DEBUG_DISABLE_LCD_STATUS_LINE } // Main status screen. It's up to the implementation specific part to show what is needed. As this is very display dependent void lcd_status_screen() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()") { if (firstrun == 1) { firstrun = 0; if(lcd_status_message_level == 0) { strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH); lcd_finishstatus(); } if (eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 1) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 2) == 255 && eeprom_read_byte((uint8_t *)EEPROM_TOTALTIME + 3) == 255) { eeprom_update_dword((uint32_t *)EEPROM_TOTALTIME, 0); eeprom_update_dword((uint32_t *)EEPROM_FILAMENTUSED, 0); } } #ifdef ULTIPANEL_FEEDMULTIPLY // Dead zone at 100% feedrate if ((feedmultiply < 100 && (feedmultiply + int(lcd_encoder)) > 100) || (feedmultiply > 100 && (feedmultiply + int(lcd_encoder)) < 100)) { lcd_encoder = 0; feedmultiply = 100; } if (feedmultiply == 100 && int(lcd_encoder) > ENCODER_FEEDRATE_DEADZONE) { feedmultiply += int(lcd_encoder) - ENCODER_FEEDRATE_DEADZONE; lcd_encoder = 0; } else if (feedmultiply == 100 && int(lcd_encoder) < -ENCODER_FEEDRATE_DEADZONE) { feedmultiply += int(lcd_encoder) + ENCODER_FEEDRATE_DEADZONE; lcd_encoder = 0; } else if (feedmultiply != 100) { feedmultiply += int(lcd_encoder); lcd_encoder = 0; } #endif //ULTIPANEL_FEEDMULTIPLY if (feedmultiply < 10) feedmultiply = 10; else if (feedmultiply > 999) feedmultiply = 999; if (lcd_status_update_delay) lcd_status_update_delay--; else lcd_draw_update = 1; if (lcd_draw_update) { /* ReInitLCD++; if (ReInitLCD == 30) { lcd_refresh(); // to maybe revive the LCD if static electricity killed it. ReInitLCD = 0 ; } else { if ((ReInitLCD % 10) == 0) lcd_refresh_noclear(); //to maybe revive the LCD if static electricity killed it. } */ lcdui_print_status_screen(); if (farm_mode) { farm_timer--; if (farm_timer < 1) { farm_timer = 10; prusa_statistics(0); } switch (farm_timer) { case 8: prusa_statistics(21); if(loading_flag) prusa_statistics(22); break; case 5: if (IS_SD_PRINTING) prusa_statistics(20); break; } } // end of farm_mode lcd_status_update_delay = 10; /* redraw the main screen every second. This is easier then trying keep track of all things that change on the screen */ if (lcd_commands_type != LcdCommands::Idle) lcd_commands(); } // end of lcd_draw_update bool current_click = LCD_CLICKED; if (ignore_click) { if (wait_for_unclick) { if (!current_click) ignore_click = wait_for_unclick = false; else current_click = false; } else if (current_click) { lcd_quick_feedback(); wait_for_unclick = true; current_click = false; } } if (current_click && ( menu_block_entering_on_serious_errors == SERIOUS_ERR_NONE ) // or a serious error blocks entering the menu ) { menu_depth = 0; //redundant, as already done in lcd_return_to_status(), just to be sure menu_submenu(lcd_main_menu); lcd_refresh(); // to maybe revive the LCD if static electricity killed it. } } void lcd_commands() { if (lcd_commands_type == LcdCommands::LongPause) { if (!blocks_queued() && !homing_flag) { lcd_setstatuspgm(_i("Print paused"));////MSG_PRINT_PAUSED c=20 r=1 lcd_commands_type = LcdCommands::Idle; lcd_commands_step = 0; long_pause(); } } #ifdef SNMM if (lcd_commands_type == LcdCommands::Layer1Cal) { char cmd1[30]; float width = 0.4; float length = 20 - width; float extr = count_e(0.2, width, length); float extr_short_segment = count_e(0.2, width, width); if (lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen if (lcd_commands_step == 0) { lcd_commands_step = 10; } if (lcd_commands_step == 10 && !blocks_queued() && cmd_buffer_empty()) { enquecommand_P(PSTR("M107")); enquecommand_P(PSTR("M104 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP))); enquecommand_P(PSTR("M140 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP))); enquecommand_P(PSTR("M190 S" STRINGIFY(PLA_PREHEAT_HPB_TEMP))); enquecommand_P(PSTR("M109 S" STRINGIFY(PLA_PREHEAT_HOTEND_TEMP))); enquecommand_P(PSTR("T0")); enquecommand_P(_T(MSG_M117_V2_CALIBRATION)); enquecommand_P(PSTR("G87")); //sets calibration status enquecommand_P(PSTR("G28")); enquecommand_P(PSTR("G21")); //set units to millimeters enquecommand_P(PSTR("G90")); //use absolute coordinates enquecommand_P(PSTR("M83")); //use relative distances for extrusion enquecommand_P(PSTR("G92 E0")); enquecommand_P(PSTR("M203 E100")); enquecommand_P(PSTR("M92 E140")); lcd_commands_step = 9; } if (lcd_commands_step == 9 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); enquecommand_P(PSTR("G1 Z0.250 F7200.000")); enquecommand_P(PSTR("G1 X50.0 E80.0 F1000.0")); enquecommand_P(PSTR("G1 X160.0 E20.0 F1000.0")); enquecommand_P(PSTR("G1 Z0.200 F7200.000")); enquecommand_P(PSTR("G1 X220.0 E13 F1000.0")); enquecommand_P(PSTR("G1 X240.0 E0 F1000.0")); enquecommand_P(PSTR("G92 E0.0")); enquecommand_P(PSTR("G21")); enquecommand_P(PSTR("G90")); enquecommand_P(PSTR("M83")); enquecommand_P(PSTR("G1 E-4 F2100.00000")); enquecommand_P(PSTR("G1 Z0.150 F7200.000")); enquecommand_P(PSTR("M204 S1000")); enquecommand_P(PSTR("G1 F4000")); lcd_clear(); menu_goto(lcd_babystep_z, 0, false, true); lcd_commands_step = 8; } if (lcd_commands_step == 8 && !blocks_queued() && cmd_buffer_empty()) //draw meander { lcd_timeoutToStatus.start(); enquecommand_P(PSTR("G1 X50 Y155")); enquecommand_P(PSTR("G1 X60 Y155 E4")); enquecommand_P(PSTR("G1 F1080")); enquecommand_P(PSTR("G1 X75 Y155 E2.5")); enquecommand_P(PSTR("G1 X100 Y155 E2")); enquecommand_P(PSTR("G1 X200 Y155 E2.62773")); enquecommand_P(PSTR("G1 X200 Y135 E0.66174")); enquecommand_P(PSTR("G1 X50 Y135 E3.62773")); enquecommand_P(PSTR("G1 X50 Y115 E0.49386")); enquecommand_P(PSTR("G1 X200 Y115 E3.62773")); enquecommand_P(PSTR("G1 X200 Y95 E0.49386")); enquecommand_P(PSTR("G1 X50 Y95 E3.62773")); enquecommand_P(PSTR("G1 X50 Y75 E0.49386")); enquecommand_P(PSTR("G1 X200 Y75 E3.62773")); enquecommand_P(PSTR("G1 X200 Y55 E0.49386")); enquecommand_P(PSTR("G1 X50 Y55 E3.62773")); lcd_commands_step = 7; } if (lcd_commands_step == 7 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); strcpy(cmd1, "G1 X50 Y35 E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); for (int i = 0; i < 4; i++) { strcpy(cmd1, "G1 X70 Y"); strcat(cmd1, ftostr32(35 - i*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); strcpy(cmd1, "G1 X50 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (i + 1)*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); } lcd_commands_step = 6; } if (lcd_commands_step == 6 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); for (int i = 4; i < 8; i++) { strcpy(cmd1, "G1 X70 Y"); strcat(cmd1, ftostr32(35 - i*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); strcpy(cmd1, "G1 X50 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (i + 1)*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); } lcd_commands_step = 5; } if (lcd_commands_step == 5 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); for (int i = 8; i < 12; i++) { strcpy(cmd1, "G1 X70 Y"); strcat(cmd1, ftostr32(35 - i*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); strcpy(cmd1, "G1 X50 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (i + 1)*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); } lcd_commands_step = 4; } if (lcd_commands_step == 4 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); for (int i = 12; i < 16; i++) { strcpy(cmd1, "G1 X70 Y"); strcat(cmd1, ftostr32(35 - i*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); strcpy(cmd1, "G1 X50 Y"); strcat(cmd1, ftostr32(35 - (2 * i + 1)*width)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr)); enquecommand(cmd1); strcpy(cmd1, "G1 Y"); strcat(cmd1, ftostr32(35 - (i + 1)*width * 2)); strcat(cmd1, " E"); strcat(cmd1, ftostr43(extr_short_segment)); enquecommand(cmd1); } lcd_commands_step = 3; } if (lcd_commands_step == 3 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); enquecommand_P(PSTR("G1 E-0.07500 F2100.00000")); enquecommand_P(PSTR("G4 S0")); enquecommand_P(PSTR("G1 E-4 F2100.00000")); enquecommand_P(PSTR("G1 Z0.5 F7200.000")); enquecommand_P(PSTR("G1 X245 Y1")); enquecommand_P(PSTR("G1 X240 E4")); enquecommand_P(PSTR("G1 F4000")); enquecommand_P(PSTR("G1 X190 E2.7")); enquecommand_P(PSTR("G1 F4600")); enquecommand_P(PSTR("G1 X110 E2.8")); enquecommand_P(PSTR("G1 F5200")); enquecommand_P(PSTR("G1 X40 E3")); enquecommand_P(PSTR("G1 E-15.0000 F5000")); enquecommand_P(PSTR("G1 E-50.0000 F5400")); enquecommand_P(PSTR("G1 E-15.0000 F3000")); enquecommand_P(PSTR("G1 E-12.0000 F2000")); enquecommand_P(PSTR("G1 F1600")); lcd_commands_step = 2; } if (lcd_commands_step == 2 && !blocks_queued() && cmd_buffer_empty()) { lcd_timeoutToStatus.start(); enquecommand_P(PSTR("G1 X0 Y1 E3.0000")); enquecommand_P(PSTR("G1 X50 Y1 E-5.0000")); enquecommand_P(PSTR("G1 F2000")); enquecommand_P(PSTR("G1 X0 Y1 E5.0000")); enquecommand_P(PSTR("G1 X50 Y1 E-5.0000")); enquecommand_P(PSTR("G1 F2400")); enquecommand_P(PSTR("G1 X0 Y1 E5.0000")); enquecommand_P(PSTR("G1 X50 Y1 E-5.0000")); enquecommand_P(PSTR("G1 F2400")); enquecommand_P(PSTR("G1 X0 Y1 E5.0000")); enquecommand_P(PSTR("G1 X50 Y1 E-3.0000")); enquecommand_P(PSTR("G4 S0")); enquecommand_P(PSTR("M107")); enquecommand_P(PSTR("M104 S0")); enquecommand_P(PSTR("M140 S0")); enquecommand_P(PSTR("G1 X10 Y180 F4000")); enquecommand_P(PSTR("G1 Z10 F1300.000")); enquecommand_P(PSTR("M84")); lcd_commands_step = 1; } if (lcd_commands_step == 1 && !blocks_queued() && cmd_buffer_empty()) { lcd_setstatuspgm(_T(WELCOME_MSG)); lcd_commands_step = 0; lcd_commands_type = 0; if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) { lcd_wizard(WizState::RepeatLay1Cal); } } } #else //if not SNMM if (lcd_commands_type == LcdCommands::Layer1Cal) { char cmd1[30]; if(lcd_commands_step>1) lcd_timeoutToStatus.start(); //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen if (!blocks_queued() && cmd_buffer_empty() && !saved_printing) { switch(lcd_commands_step) { case 0: lcd_commands_step = 11; break; case 11: lay1cal_wait_preheat(); lcd_commands_step = 10; break; case 10: lay1cal_load_filament(cmd1, lay1cal_filament); lcd_commands_step = 9; break; case 9: lcd_clear(); menu_depth = 0; menu_submenu(lcd_babystep_z); lay1cal_intro_line(); lcd_commands_step = 8; break; case 8: lay1cal_before_meander(); lcd_commands_step = 7; break; case 7: lay1cal_meander(cmd1); lcd_commands_step = 6; break; case 6: for (uint8_t i = 0; i < 4; i++) { lay1cal_square(cmd1, i); } lcd_commands_step = 5; break; case 5: for (uint8_t i = 4; i < 8; i++) { lay1cal_square(cmd1, i); } lcd_commands_step = 4; break; case 4: for (uint8_t i = 8; i < 12; i++) { lay1cal_square(cmd1, i); } lcd_commands_step = 3; break; case 3: for (uint8_t i = 12; i < 16; i++) { lay1cal_square(cmd1, i); } lcd_commands_step = 2; break; case 2: enquecommand_P(PSTR("M107")); //turn off printer fan enquecommand_P(PSTR("G1 E-0.07500 F2100.00000")); //retract enquecommand_P(PSTR("M104 S0")); // turn off temperature enquecommand_P(PSTR("M140 S0")); // turn off heatbed enquecommand_P(PSTR("G1 Z10 F1300.000")); //lift Z enquecommand_P(PSTR("G1 X10 Y180 F4000")); //Go to parking position if (mmu_enabled) enquecommand_P(PSTR("M702 C")); //unload from nozzle enquecommand_P(PSTR("M84"));// disable motors forceMenuExpire = true; //if user dont confirm live adjust Z value by pressing the knob, we are saving last value by timeout to status screen lcd_commands_step = 1; break; case 1: lcd_setstatuspgm(_T(WELCOME_MSG)); lcd_commands_step = 0; lcd_commands_type = LcdCommands::Idle; if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) == 1) { lcd_wizard(WizState::RepeatLay1Cal); } break; } } } #endif // not SNMM if (lcd_commands_type == LcdCommands::FarmModeConfirm) /// farm mode confirm { if (lcd_commands_step == 0) { lcd_commands_step = 6; } if (lcd_commands_step == 1 && !blocks_queued()) { lcd_commands_step = 0; lcd_commands_type = LcdCommands::Idle; } if (lcd_commands_step == 2 && !blocks_queued()) { lcd_commands_step = 1; } if (lcd_commands_step == 3 && !blocks_queued()) { lcd_commands_step = 2; } if (lcd_commands_step == 4 && !blocks_queued()) { enquecommand_P(PSTR("G90")); enquecommand_P(PSTR("G1 X" STRINGIFY(X_CANCEL_POS) " Y" STRINGIFY(Y_CANCEL_POS) " E0 F7000")); lcd_commands_step = 3; } if (lcd_commands_step == 5 && !blocks_queued()) { lcd_commands_step = 4; } if (lcd_commands_step == 6 && !blocks_queued()) { enquecommand_P(PSTR("G91")); enquecommand_P(PSTR("G1 Z15 F1500")); st_synchronize(); #ifdef SNMM lcd_commands_step = 7; #else lcd_commands_step = 5; #endif } } if (lcd_commands_type == LcdCommands::PidExtruder) { char cmd1[30]; if (lcd_commands_step == 0) { custom_message_type = CustomMsg::PidCal; custom_message_state = 1; lcd_draw_update = 3; lcd_commands_step = 3; } if (lcd_commands_step == 3 && !blocks_queued()) { //PID calibration strcpy(cmd1, "M303 E0 S"); strcat(cmd1, ftostr3(pid_temp)); // setting the correct target temperature (for visualization) is done in PID_autotune enquecommand(cmd1); lcd_setstatuspgm(_i("PID cal. "));////MSG_PID_RUNNING c=20 r=1 lcd_commands_step = 2; } if (lcd_commands_step == 2 && pid_tuning_finished) { //saving to eeprom pid_tuning_finished = false; custom_message_state = 0; lcd_setstatuspgm(_i("PID cal. finished"));////MSG_PID_FINISHED c=20 r=1 setAllTargetHotends(0); // reset all hotends temperature including the number displayed on the main screen if (_Kp != 0 || _Ki != 0 || _Kd != 0) { strcpy(cmd1, "M301 P"); strcat(cmd1, ftostr32(_Kp)); strcat(cmd1, " I"); strcat(cmd1, ftostr32(_Ki)); strcat(cmd1, " D"); strcat(cmd1, ftostr32(_Kd)); enquecommand(cmd1); enquecommand_P(PSTR("M500")); } else { SERIAL_ECHOPGM("Invalid PID cal. results. Not stored to EEPROM."); } display_time = _millis(); lcd_commands_step = 1; } if ((lcd_commands_step == 1) && ((_millis()- display_time)>2000)) { //calibration finished message lcd_setstatuspgm(_T(WELCOME_MSG)); custom_message_type = CustomMsg::Status; pid_temp = DEFAULT_PID_TEMP; lcd_commands_step = 0; lcd_commands_type = LcdCommands::Idle; } } } void lcd_return_to_status() { lcd_refresh(); // to maybe revive the LCD if static electricity killed it. menu_goto(lcd_status_screen, 0, false, true); menu_depth = 0; eFilamentAction = FilamentAction::None; // i.e. non-autoLoad } //! @brief Pause print, disable nozzle heater, move to park position void lcd_pause_print() { SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_PAUSED); //pause for octoprint stop_and_save_print_to_ram(0.0, -default_retraction); lcd_return_to_status(); isPrintPaused = true; if (LcdCommands::Idle == lcd_commands_type) { lcd_commands_type = LcdCommands::LongPause; } } float move_menu_scale; static void lcd_move_menu_axis(); /* Menu implementation */ static void lcd_cooldown() { setAllTargetHotends(0); setTargetBed(0); fanSpeed = 0; eFilamentAction = FilamentAction::None; lcd_return_to_status(); } //! @brief append text label with a colon and format it into a fixed size output buffer //! It would have been much easier if there was a ':' in the labels. //! But since the texts like Bed, Nozzle and PINDA are used in other places //! it is better to reuse these texts even though it requires some extra formatting code. //! @param [in] ipgmLabel pointer to string in PROGMEM //! @param [out] pointer to string in RAM which will receive the formatted text. Must be allocated to appropriate size //! @param [in] dstSize allocated length of dst static void pgmtext_with_colon(const char *ipgmLabel, char *dst, uint8_t dstSize){ uint8_t i = 0; for(; i < dstSize - 2; ++i){ // 2 byte less than buffer, we'd be adding a ':' to the end uint8_t b = pgm_read_byte(ipgmLabel + i); if( ! b ) break; dst[i] = b; } dst[i] = ':'; // append the colon ++i; for(; i < dstSize - 1; ++i) // fill the rest with spaces dst[i] = ' '; dst[dstSize-1] = '\0'; // terminate the string properly } //! @brief Show Extruder Info //! //! @code{.unparsed} //! |01234567890123456789| //! |Nozzle FAN: 0000 RPM| FAN c=10 r=1 SPEED c=3 r=1 //! |Print FAN: 0000 RPM| FAN c=10 r=1 SPEED c=3 r=1 //! |Fil. Xd:000 Yd:000 | Fil. c=4 r=1 //! |Int: 000 Shut: 000 | Int: c=4 r=1 Shut: c=4 r=1 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. void lcd_menu_extruder_info() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()") { // Display Nozzle fan RPM lcd_timeoutToStatus.stop(); //infinite timeout lcd_home(); static const size_t maxChars = 12; char nozzle[maxChars], print[maxChars]; pgmtext_with_colon(_i("Nozzle FAN"), nozzle, maxChars); ////c=10 r=1 pgmtext_with_colon(_i("Print FAN"), print, maxChars); ////c=10 r=1 lcd_printf_P(_N("%s %4d RPM\n" "%s %4d RPM\n"), nozzle, 60*fan_speed[0], print, 60*fan_speed[1] ); #ifdef PAT9125 // Display X and Y difference from Filament sensor // Display Light intensity from Filament sensor // Frame_Avg register represents the average brightness of all pixels within a frame (324 pixels). This // value ranges from 0(darkest) to 255(brightest). // Display LASER shutter time from Filament sensor // Shutter register is an index of LASER shutter time. It is automatically controlled by the chip's internal // auto-exposure algorithm. When the chip is tracking on a good reflection surface, the Shutter is small. // When the chip is tracking on a poor reflection surface, the Shutter is large. Value ranges from 0 to 46. if (mmu_enabled == false) { if (!fsensor_enabled) lcd_puts_P(_N("Filament sensor\n" "is disabled.")); else { if (!moves_planned() && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) pat9125_update(); lcd_printf_P(_N( "Fil. Xd:%3d Yd:%3d\n" ////c=4 r=1 "Int: %3d " ////c=4 r=1 "Shut: %3d" ////c=4 r=1 ), pat9125_x, pat9125_y, pat9125_b, pat9125_s ); } } #endif //PAT9125 menu_back_if_clicked(); } //! @brief Show Fails Statistics MMU //! //! @code{.unparsed} //! |01234567890123456789| //! | Main | c=18 r=1 //! | Last print | MSG_LAST_PRINT c=18 //! | Total | MSG_TOTAL c=6 //! | | //! ---------------------- //! @endcode static void lcd_menu_fails_stats_mmu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_SUBMENU_P(_T(MSG_LAST_PRINT), lcd_menu_fails_stats_mmu_print); MENU_ITEM_SUBMENU_P(_T(MSG_TOTAL), lcd_menu_fails_stats_mmu_total); ////c=18 r=1 MENU_END(); } //! @brief Show Last Print Failures Statistics MMU //! //! @code{.unparsed} //! |01234567890123456789| //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20 //! | MMU fails 000| MSG_MMU_FAILS c=15 //! | MMU load fails 000| MSG_MMU_LOAD_FAILS c=15 //! | | //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_fails_stats_mmu_print() { lcd_timeoutToStatus.stop(); //infinite timeout uint8_t fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL); uint16_t load_fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL); lcd_home(); lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d"), _T(MSG_LAST_PRINT_FAILURES), ////c=20 _T(MSG_MMU_FAILS), fails, ////c=15 _T(MSG_MMU_LOAD_FAILS), load_fails); ////c=15 menu_back_if_clicked_fb(); } //! @brief Show Total Failures Statistics MMU //! //! @code{.unparsed} //! |01234567890123456789| //! |Total failures | MSG_TOTAL_FAILURES c=20 //! | MMU fails 000| MSG_MMU_FAILS c=15 //! | MMU load fails 000| MSG_MMU_LOAD_FAILS c=15 //! | MMU power fails 000| c=15 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_fails_stats_mmu_total() { mmu_command(MmuCmd::S3); lcd_timeoutToStatus.stop(); //infinite timeout uint8_t fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_FAIL_TOT); uint16_t load_fails = eeprom_read_byte((uint8_t*)EEPROM_MMU_LOAD_FAIL_TOT); lcd_home(); lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-16.16S%-3d"), _T(MSG_TOTAL_FAILURES), ////c=20 _T(MSG_MMU_FAILS), fails, ////c=15 _T(MSG_MMU_LOAD_FAILS), load_fails, ////c=15 _i("MMU power fails"), mmu_power_failures); ////c=15 r=1 menu_back_if_clicked_fb(); } #if defined(TMC2130) && defined(FILAMENT_SENSOR) static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" " %-16.16S%-3d\n" " %-7.7SX %-3d Y %-3d"; //! @brief Show Total Failures Statistics MMU //! //! @code{.unparsed} //! |01234567890123456789| //! |Total failures | MSG_TOTAL_FAILURES c=20 //! | Power failures 000| MSG_POWER_FAILURES c=15 //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15 //! | Crash X:000 Y:000| MSG_CRASH c=7 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_fails_stats_total() { lcd_timeoutToStatus.stop(); //infinite timeout uint16_t power = eeprom_read_word((uint16_t*)EEPROM_POWER_COUNT_TOT); uint16_t filam = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT); uint16_t crashX = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_X_TOT); uint16_t crashY = eeprom_read_word((uint16_t*)EEPROM_CRASH_COUNT_Y_TOT); lcd_home(); lcd_printf_P(failStatsFmt, _T(MSG_TOTAL_FAILURES), ////c=20 _T(MSG_POWER_FAILURES), power, ////c=15 _T(MSG_FIL_RUNOUTS), filam, ////c=15 _T(MSG_CRASH), crashX, crashY); ////c=7 menu_back_if_clicked_fb(); } //! @brief Show Last Print Failures Statistics //! //! @code{.unparsed} //! |01234567890123456789| //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20 //! | Power failures 000| MSG_POWER_FAILURES c=15 //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15 //! | Crash X 000 Y 000| MSG_CRASH c=7 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_fails_stats_print() { lcd_timeoutToStatus.stop(); //infinite timeout uint8_t power = eeprom_read_byte((uint8_t*)EEPROM_POWER_COUNT); uint8_t filam = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT); uint8_t crashX = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_X); uint8_t crashY = eeprom_read_byte((uint8_t*)EEPROM_CRASH_COUNT_Y); lcd_home(); #ifndef PAT9125 lcd_printf_P(failStatsFmt, _T(MSG_LAST_PRINT_FAILURES), ////c=20 _T(MSG_POWER_FAILURES), power, ////c=15 _T(MSG_FIL_RUNOUTS), filam, ////c=15 _T(MSG_CRASH), crashX, crashY); ////c=7 #else // On the MK3 include detailed PAT9125 statistics about soft failures lcd_printf_P(PSTR("%S\n" " %-16.16S%-3d\n" " %-7.7S H %-3d S %-3d\n" " %-7.7S X %-3d Y %-3d"), _T(MSG_LAST_PRINT_FAILURES), ////c=20 _T(MSG_POWER_FAILURES), power, ////c=15 _i("Runouts"), filam, fsensor_softfail, //c=7 _T(MSG_CRASH), crashX, crashY); ////c=7 #endif menu_back_if_clicked_fb(); } //! @brief Open fail statistics menu //! //! This version of function is used, when there is filament sensor, //! power failure and crash detection. //! There are Last print and Total menu items. //! //! @code{.unparsed} //! |01234567890123456789| //! | Main | c=18 r=1 //! | Last print | MSG_LAST_PRINT c=18 //! | Total | MSG_TOTAL c=6 //! | | //! ---------------------- //! @endcode static void lcd_menu_fails_stats() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_SUBMENU_P(_T(MSG_LAST_PRINT), lcd_menu_fails_stats_print); ////c=18 r=1 MENU_ITEM_SUBMENU_P(_T(MSG_TOTAL), lcd_menu_fails_stats_total); ////c=18 r=1 MENU_END(); } #elif defined(FILAMENT_SENSOR) static const char failStatsFmt[] PROGMEM = "%S\n" " %-16.16S%-3d\n" "%S\n" " %-16.16S%-3d\n"; //! //! @brief Print last print and total filament run outs //! //! This version of function is used, when there is filament sensor, //! but no other sensors (e.g. power failure, crash detection). //! //! Example screen: //! @code{.unparsed} //! |01234567890123456789| //! |Last print failures | MSG_LAST_PRINT_FAILURES c=20 //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15 //! |Total failures | MSG_TOTAL_FAILURES c=20 //! | Fil. runouts 000| MSG_FIL_RUNOUTS c=15 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_fails_stats() { lcd_timeoutToStatus.stop(); //infinite timeout uint8_t filamentLast = eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT); uint16_t filamentTotal = eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT); lcd_home(); lcd_printf_P(failStatsFmt, _T(MSG_LAST_PRINT_FAILURES), ////c=20 _T(MSG_FIL_RUNOUTS), filamentLast, ////c=15 _T(MSG_TOTAL_FAILURES), ////c=20 _T(MSG_FIL_RUNOUTS), filamentTotal); ////c=15 menu_back_if_clicked(); } #else static void lcd_menu_fails_stats() { lcd_timeoutToStatus.stop(); //infinite timeout MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_END(); } #endif //TMC2130 #ifdef DEBUG_BUILD #ifdef DEBUG_STACK_MONITOR extern uint16_t SP_min; extern char* __malloc_heap_start; extern char* __malloc_heap_end; #endif //DEBUG_STACK_MONITOR //! @brief Show Debug Information //! //! @code{.unparsed} //! |01234567890123456789| //! |RAM statistics | c=20 r=1 //! | SP_min: 0000| c=14 r=1 //! | heap_start: 0000| c=14 r=1 //! | heap_end: 0000| c=14 r=1 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_debug() { #ifdef DEBUG_STACK_MONITOR lcd_home(); lcd_printf_P(PSTR("RAM statistics\n" ////c=20 r=1 " SP_min: 0x%04x\n" ////c=14 r=1 " heap_start: 0x%04x\n" ////c=14 r=1 " heap_end: 0x%04x"), SP_min, __malloc_heap_start, __malloc_heap_end); ////c=14 r=1 #endif //DEBUG_STACK_MONITOR menu_back_if_clicked_fb(); } #endif /* DEBUG_BUILD */ //! @brief common line print for lcd_menu_temperatures //! @param [in] ipgmLabel pointer to string in PROGMEM //! @param [in] value to be printed behind the label static void lcd_menu_temperatures_line(const char *ipgmLabel, int value){ static const size_t maxChars = 15; char tmp[maxChars]; pgmtext_with_colon(ipgmLabel, tmp, maxChars); lcd_printf_P(PSTR(" %s%3d\x01 \n"), tmp, value); // no need to add -14.14 to string alignment } //! @brief Show Temperatures //! //! @code{.unparsed} //! |01234567890123456789| //! | Nozzle: 000D| c=14 r=1 //! | Bed: 000D| c=14 r=1 //! | Ambient: 000D| c=14 r=1 //! | PINDA: 000D| c=14 r=1 //! ---------------------- //! D - Degree sysmbol LCD_STR_DEGREE //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_temperatures() { lcd_timeoutToStatus.stop(); //infinite timeout lcd_home(); lcd_menu_temperatures_line( _T(MSG_NOZZLE), (int)current_temperature[0] ); ////c=14 r=1 lcd_menu_temperatures_line( _T(MSG_BED), (int)current_temperature_bed ); ////c=14 r=1 #ifdef AMBIENT_THERMISTOR lcd_menu_temperatures_line( _i("Ambient"), (int)current_temperature_ambient ); ////c=14 r=1 #endif //AMBIENT_THERMISTOR #ifdef PINDA_THERMISTOR lcd_menu_temperatures_line( _i("PINDA"), (int)current_temperature_pinda ); ////c=14 #endif //PINDA_THERMISTOR menu_back_if_clicked(); } #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG) #define VOLT_DIV_R1 10000 #define VOLT_DIV_R2 2370 #define VOLT_DIV_FAC ((float)VOLT_DIV_R2 / (VOLT_DIV_R2 + VOLT_DIV_R1)) //! @brief Show Voltages //! //! @code{.unparsed} //! |01234567890123456789| //! | | //! | PWR: 00.0V | c=12 r=1 //! | Bed: 00.0V | c=12 r=1 //! | IR : 00.0V | c=12 r=1 optional //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_voltages() { lcd_timeoutToStatus.stop(); //infinite timeout float volt_pwr = VOLT_DIV_REF * ((float)current_voltage_raw_pwr / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC; float volt_bed = VOLT_DIV_REF * ((float)current_voltage_raw_bed / (1023 * OVERSAMPLENR)) / VOLT_DIV_FAC; lcd_home(); lcd_printf_P(PSTR(" PWR: %4.1fV\n" " BED: %4.1fV"), volt_pwr, volt_bed); #ifdef IR_SENSOR_ANALOG lcd_printf_P(PSTR("\n IR : %3.1fV"), Raw2Voltage(current_voltage_raw_IR)); #endif //IR_SENSOR_ANALOG menu_back_if_clicked(); } #endif //defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) || defined(IR_SENSOR_ANALOG) #ifdef TMC2130 //! @brief Show Belt Status //! //! @code{.unparsed} //! |01234567890123456789| //! | Belt status | c=18 //! | X: 000 | //! | Y: 000 | //! | | //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_belt_status() { lcd_home(); lcd_printf_P(PSTR("%S\n" " X %d\n" " Y %d"), _T(MSG_BELT_STATUS), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)), eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y))); menu_back_if_clicked(); } #endif //TMC2130 #ifdef RESUME_DEBUG extern void stop_and_save_print_to_ram(float z_move, float e_move); extern void restore_print_from_ram_and_continue(float e_move); static void lcd_menu_test_save() { stop_and_save_print_to_ram(10, -0.8); } static void lcd_menu_test_restore() { restore_print_from_ram_and_continue(0.8); } #endif //RESUME_DEBUG //! @brief Show Preheat Menu static void lcd_preheat_menu() { eFilamentAction = FilamentAction::Preheat; lcd_generic_preheat_menu(); } //! @brief Show Support Menu //! //! @code{.unparsed} //! |01234567890123456789| //! | Main | //! | Firmware: | c=18 r=1 //! | 3.7.2.-2363 | c=16 r=1 //! | prusa3d.com | MSG_PRUSA3D //! | forum.prusa3d.com | MSG_PRUSA3D_FORUM //! | howto.prusa3d.com | MSG_PRUSA3D_HOWTO //! | -------------- | STR_SEPARATOR //! | 1_75mm_MK3 | FILAMENT_SIZE //! | howto.prusa3d.com | ELECTRONICS //! | howto.prusa3d.com | NOZZLE_TYPE //! | -------------- | STR_SEPARATOR //! | Date: | c=17 r=1 //! | MMM DD YYYY | __DATE__ //! | -------------- | STR_SEPARATOR //! @endcode //! //! If MMU is connected //! //! @code{.unparsed} //! | MMU2 connected | c=18 r=1 //! | FW: 1.0.6-7064523 | //! @endcode //! //! If MMU is not connected //! //! @code{.unparsed} //! | MMU2 N/A | c=18 r=1 //! @endcode //! //! If Flash Air is connected //! //! @code{.unparsed} //! | -------------- | STR_SEPARATOR //! | FlashAir IP Addr: | c=18 r=1 //! | 192.168.1.100 | //! @endcode //! //! @code{.unparsed} //! | -------------- | STR_SEPARATOR //! | XYZ cal. details | MSG_XYZ_DETAILS c=18 //! | Extruder info | MSG_INFO_EXTRUDER //! | XYZ cal. details | MSG_INFO_SENSORS //! @endcode //! //! If TMC2130 defined //! //! @code{.unparsed} //! | Belt status | MSG_BELT_STATUS //! @endcode //! //! @code{.unparsed} //! | Temperatures | MSG_MENU_TEMPERATURES //! @endcode //! //! If Voltage Bed and PWR Pin are defined //! //! @code{.unparsed} //! | Voltages | MSG_MENU_VOLTAGES //! @endcode //! //! //! If DEBUG_BUILD is defined //! //! @code{.unparsed} //! | Debug | c=18 r=1 //! @endcode //! ---------------------- //! @endcode static void lcd_support_menu() { typedef struct { // 22bytes total int8_t status; // 1byte bool is_flash_air; // 1byte uint32_t ip; // 4bytes char ip_str[IP4_STR_SIZE]; // 16bytes } _menu_data_t; static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data"); _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]); if (_md->status == 0 || lcd_draw_update == 2) { // Menu was entered or SD card status has changed (plugged in or removed). // Initialize its status. _md->status = 1; _md->is_flash_air = card.ToshibaFlashAir_isEnabled(); if (_md->is_flash_air) { card.ToshibaFlashAir_GetIP((uint8_t*)(&_md->ip)); // ip == 0 if it failed } } else if (_md->is_flash_air && _md->ip == 0 && ++ _md->status == 16) { // Waiting for the FlashAir card to get an IP address from a router. Force an update. _md->status = 0; } MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_BACK_P(PSTR("Firmware:")); MENU_ITEM_BACK_P(PSTR(" " FW_VERSION_FULL)); #if (FW_DEV_VERSION != FW_VERSION_GOLD) && (FW_DEV_VERSION != FW_VERSION_RC) MENU_ITEM_BACK_P(PSTR(" repo " FW_REPOSITORY)); #endif // Ideally this block would be optimized out by the compiler. /* const uint8_t fw_string_len = strlen_P(FW_VERSION_STR_P()); if (fw_string_len < 6) { MENU_ITEM_BACK_P(PSTR(MSG_FW_VERSION " - " FW_version)); } else { MENU_ITEM_BACK_P(PSTR("FW - " FW_version)); }*/ MENU_ITEM_BACK_P(_i("prusa3d.com"));////MSG_PRUSA3D MENU_ITEM_BACK_P(_i("forum.prusa3d.com"));////MSG_PRUSA3D_FORUM MENU_ITEM_BACK_P(_i("howto.prusa3d.com"));////MSG_PRUSA3D_HOWTO MENU_ITEM_BACK_P(STR_SEPARATOR); MENU_ITEM_BACK_P(PSTR(FILAMENT_SIZE)); MENU_ITEM_BACK_P(PSTR(ELECTRONICS)); MENU_ITEM_BACK_P(PSTR(NOZZLE_TYPE)); MENU_ITEM_BACK_P(STR_SEPARATOR); MENU_ITEM_BACK_P(_i("Date:"));////MSG_DATE c=17 r=1 MENU_ITEM_BACK_P(PSTR(__DATE__)); #ifdef IR_SENSOR_ANALOG MENU_ITEM_BACK_P(STR_SEPARATOR); MENU_ITEM_BACK_P(PSTR("Fil. sensor v.:")); MENU_ITEM_BACK_P(FsensorIRVersionText()); #endif // IR_SENSOR_ANALOG MENU_ITEM_BACK_P(STR_SEPARATOR); if (mmu_enabled) { MENU_ITEM_BACK_P(_i("MMU2 connected")); ////c=18 r=1 MENU_ITEM_BACK_P(PSTR(" FW:")); ////c=17 r=1 if (((menu_item - 1) == menu_line) && lcd_draw_update) { lcd_set_cursor(6, menu_row); if ((mmu_version > 0) && (mmu_buildnr > 0)) lcd_printf_P(PSTR("%d.%d.%d-%d"), mmu_version/100, mmu_version%100/10, mmu_version%10, mmu_buildnr); else lcd_puts_P(_i("unknown")); } } else MENU_ITEM_BACK_P(PSTR("MMU2 N/A")); // Show the FlashAir IP address, if the card is available. if (_md->is_flash_air) { MENU_ITEM_BACK_P(STR_SEPARATOR); MENU_ITEM_BACK_P(PSTR("FlashAir IP Addr:")); //c=18 r=1 MENU_ITEM_BACK_P(PSTR(" ")); if (((menu_item - 1) == menu_line) && lcd_draw_update) { lcd_set_cursor(2, menu_row); ip4_to_str(_md->ip_str, (uint8_t*)(&_md->ip)); lcd_printf_P(PSTR("%s"), _md->ip_str); } } // Show the printer IP address, if it is available. if (IP_address) { MENU_ITEM_BACK_P(STR_SEPARATOR); MENU_ITEM_BACK_P(PSTR("Printer IP Addr:")); //c=18 r=1 MENU_ITEM_BACK_P(PSTR(" ")); if (((menu_item - 1) == menu_line) && lcd_draw_update) { lcd_set_cursor(2, menu_row); ip4_to_str(_md->ip_str, (uint8_t*)(&IP_address)); lcd_printf_P(PSTR("%s"), _md->ip_str); } } #ifndef MK1BP MENU_ITEM_BACK_P(STR_SEPARATOR); MENU_ITEM_SUBMENU_P(_i("XYZ cal. details"), lcd_menu_xyz_y_min);////MSG_XYZ_DETAILS c=18 MENU_ITEM_SUBMENU_P(_i("Extruder info"), lcd_menu_extruder_info);////MSG_INFO_EXTRUDER c=18 MENU_ITEM_SUBMENU_P(_i("Sensor info"), lcd_menu_show_sensors_state);////MSG_INFO_SENSORS c=18 r=1 #ifdef TMC2130 MENU_ITEM_SUBMENU_P(_T(MSG_BELT_STATUS), lcd_menu_belt_status);////MSG_BELT_STATUS c=18 #endif //TMC2130 MENU_ITEM_SUBMENU_P(_i("Temperatures"), lcd_menu_temperatures);////MSG_MENU_TEMPERATURES c=18 r=1 #if defined (VOLT_BED_PIN) || defined (VOLT_PWR_PIN) MENU_ITEM_SUBMENU_P(_i("Voltages"), lcd_menu_voltages);////MSG_MENU_VOLTAGES c=18 r=1 #endif //defined VOLT_BED_PIN || defined VOLT_PWR_PIN #ifdef DEBUG_BUILD MENU_ITEM_SUBMENU_P(PSTR("Debug"), lcd_menu_debug);////c=18 r=1 #endif /* DEBUG_BUILD */ #endif //MK1BP MENU_END(); } void lcd_set_fan_check() { fans_check_enabled = !fans_check_enabled; eeprom_update_byte((unsigned char *)EEPROM_FAN_CHECK_ENABLED, fans_check_enabled); #ifdef FANCHECK if (fans_check_enabled == false) fan_check_error = EFCE_OK; //reset error if fanCheck is disabled during error. Allows resuming print. #endif //FANCHECK } #ifdef MMU_HAS_CUTTER void lcd_cutter_enabled() { if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED)) { #ifndef MMU_ALWAYS_CUT eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0); } #else //MMU_ALWAYS_CUT eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_always); } else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED)) { eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, 0); } #endif //MMU_ALWAYS_CUT else { eeprom_update_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED, EEPROM_MMU_CUTTER_ENABLED_enabled); } } #endif //MMU_HAS_CUTTER void lcd_set_filament_autoload() { fsensor_autoload_set(!fsensor_autoload_enabled); } #if defined(FILAMENT_SENSOR) && defined(PAT9125) void lcd_set_filament_oq_meass() { fsensor_oq_meassure_set(!fsensor_oq_meassure_enabled); } #endif FilamentAction eFilamentAction=FilamentAction::None; // must be initialized as 'non-autoLoad' bool bFilamentFirstRun; bool bFilamentPreheatState; bool bFilamentAction=false; static bool bFilamentWaitingFlag=false; static void mFilamentPrompt() { uint8_t nLevel; lcd_set_cursor(0,0); lcdui_print_temp(LCD_STR_THERMOMETER[0],(int)degHotend(0),(int)degTargetHotend(0)); lcd_puts_at_P(0,1, _i("Press the knob")); ////MSG_ c=20 lcd_set_cursor(0,2); switch(eFilamentAction) { case FilamentAction::Load: case FilamentAction::AutoLoad: case FilamentAction::MmuLoad: lcd_puts_P(_i("to load filament")); ////MSG_ c=20 break; case FilamentAction::UnLoad: case FilamentAction::MmuUnLoad: lcd_puts_P(_i("to unload filament")); ////MSG_ c=20 break; case FilamentAction::MmuEject: case FilamentAction::MmuCut: case FilamentAction::None: case FilamentAction::Preheat: case FilamentAction::Lay1Cal: break; } if(lcd_clicked()) { nLevel=2; if(!bFilamentPreheatState) { nLevel++; // setTargetHotend0(0.0); // uncoment if return to base-state is required } menu_back(nLevel); switch(eFilamentAction) { case FilamentAction::AutoLoad: eFilamentAction=FilamentAction::None; // i.e. non-autoLoad // no break case FilamentAction::Load: loading_flag=true; enquecommand_P(PSTR("M701")); // load filament break; case FilamentAction::UnLoad: enquecommand_P(PSTR("M702")); // unload filament break; case FilamentAction::MmuLoad: case FilamentAction::MmuUnLoad: case FilamentAction::MmuEject: case FilamentAction::MmuCut: case FilamentAction::None: case FilamentAction::Preheat: case FilamentAction::Lay1Cal: break; } } } void mFilamentItem(uint16_t nTemp, uint16_t nTempBed) { static int nTargetOld; static int nTargetBedOld; uint8_t nLevel; nTargetOld = target_temperature[0]; nTargetBedOld = target_temperature_bed; setTargetHotend0((float )nTemp); setTargetBed((float) nTempBed); { const FilamentAction action = eFilamentAction; if (action == FilamentAction::Preheat || action == FilamentAction::Lay1Cal) { lcd_return_to_status(); if (action == FilamentAction::Lay1Cal) { lcd_commands_type = LcdCommands::Layer1Cal; } else { raise_z_above(MIN_Z_FOR_PREHEAT); if (eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE)) lcd_wizard(WizState::LoadFilHot); } return; } } lcd_timeoutToStatus.stop(); if (current_temperature[0] > (target_temperature[0] * 0.95)) { switch (eFilamentAction) { case FilamentAction::Load: case FilamentAction::AutoLoad: case FilamentAction::UnLoad: if (bFilamentWaitingFlag) menu_submenu(mFilamentPrompt); else { nLevel = bFilamentPreheatState ? 1 : 2; menu_back(nLevel); if ((eFilamentAction == FilamentAction::Load) || (eFilamentAction == FilamentAction::AutoLoad)) { loading_flag = true; enquecommand_P(PSTR("M701")); // load filament if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad } if (eFilamentAction == FilamentAction::UnLoad) enquecommand_P(PSTR("M702")); // unload filament } break; case FilamentAction::MmuLoad: nLevel = bFilamentPreheatState ? 1 : 2; bFilamentAction = true; menu_back(nLevel); menu_submenu(mmu_load_to_nozzle_menu); break; case FilamentAction::MmuUnLoad: nLevel = bFilamentPreheatState ? 1 : 2; bFilamentAction = true; menu_back(nLevel); extr_unload(); break; case FilamentAction::MmuEject: nLevel = bFilamentPreheatState ? 1 : 2; bFilamentAction = true; menu_back(nLevel); menu_submenu(mmu_fil_eject_menu); break; case FilamentAction::MmuCut: #ifdef MMU_HAS_CUTTER nLevel=bFilamentPreheatState?1:2; bFilamentAction=true; menu_back(nLevel); menu_submenu(mmu_cut_filament_menu); #endif //MMU_HAS_CUTTER break; case FilamentAction::None: case FilamentAction::Preheat: case FilamentAction::Lay1Cal: // handled earlier break; } if (bFilamentWaitingFlag) Sound_MakeSound(e_SOUND_TYPE_StandardPrompt); bFilamentWaitingFlag = false; } else { lcd_set_cursor(0, 0); lcdui_print_temp(LCD_STR_THERMOMETER[0], degHotend(0), (int)degTargetHotend(0)); if (!bFilamentWaitingFlag) { // First run after the filament preheat selection: // setup the fixed LCD parts and raise Z as we wait bFilamentWaitingFlag = true; lcd_set_cursor(0, 1); switch (eFilamentAction) { case FilamentAction::Load: case FilamentAction::AutoLoad: case FilamentAction::MmuLoad: lcd_puts_P(_i("Preheating to load")); ////MSG_ c=20 raise_z_above(MIN_Z_FOR_LOAD); break; case FilamentAction::UnLoad: case FilamentAction::MmuUnLoad: lcd_puts_P(_i("Preheating to unload")); ////MSG_ c=20 raise_z_above(MIN_Z_FOR_UNLOAD); break; case FilamentAction::MmuEject: lcd_puts_P(_i("Preheating to eject")); ////MSG_ c=20 break; case FilamentAction::MmuCut: lcd_puts_P(_i("Preheating to cut")); ////MSG_ c=20 break; case FilamentAction::None: case FilamentAction::Preheat: case FilamentAction::Lay1Cal: // handled earlier break; } lcd_puts_at_P(0, 3, _i(">Cancel")); ////MSG_ c=20 r=1 } if (lcd_clicked()) { bFilamentWaitingFlag = false; if (!bFilamentPreheatState) { setTargetHotend0(0.0); setTargetBed(0.0); menu_back(); } else { setTargetHotend0((float )nTargetOld); setTargetBed((float) nTargetBedOld); } menu_back(); if (eFilamentAction == FilamentAction::AutoLoad) eFilamentAction = FilamentAction::None; // i.e. non-autoLoad } } } static void mFilamentItem_farm() { bFilamentPreheatState = false; mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, FARM_PREHEAT_HPB_TEMP); } static void mFilamentItem_farm_nozzle() { bFilamentPreheatState = false; mFilamentItem(FARM_PREHEAT_HOTEND_TEMP, 0); } static void mFilamentItem_PLA() { bFilamentPreheatState = false; mFilamentItem(PLA_PREHEAT_HOTEND_TEMP, PLA_PREHEAT_HPB_TEMP); } static void mFilamentItem_PET() { bFilamentPreheatState = false; mFilamentItem(PET_PREHEAT_HOTEND_TEMP, PET_PREHEAT_HPB_TEMP); } static void mFilamentItem_ASA() { bFilamentPreheatState = false; mFilamentItem(ASA_PREHEAT_HOTEND_TEMP, ASA_PREHEAT_HPB_TEMP); } static void mFilamentItem_PC() { bFilamentPreheatState = false; mFilamentItem(PC_PREHEAT_HOTEND_TEMP, PC_PREHEAT_HPB_TEMP); } static void mFilamentItem_ABS() { bFilamentPreheatState = false; mFilamentItem(ABS_PREHEAT_HOTEND_TEMP, ABS_PREHEAT_HPB_TEMP); } static void mFilamentItem_HIPS() { bFilamentPreheatState = false; mFilamentItem(HIPS_PREHEAT_HOTEND_TEMP, HIPS_PREHEAT_HPB_TEMP); } static void mFilamentItem_PP() { bFilamentPreheatState = false; mFilamentItem(PP_PREHEAT_HOTEND_TEMP, PP_PREHEAT_HPB_TEMP); } static void mFilamentItem_FLEX() { bFilamentPreheatState = false; mFilamentItem(FLEX_PREHEAT_HOTEND_TEMP, FLEX_PREHEAT_HPB_TEMP); } static void mFilamentItem_PVB() { bFilamentPreheatState = false; mFilamentItem(PVB_PREHEAT_HOTEND_TEMP, PVB_PREHEAT_HPB_TEMP); } void mFilamentBack() { menu_back(); if (eFilamentAction == FilamentAction::AutoLoad || eFilamentAction == FilamentAction::Preheat || eFilamentAction == FilamentAction::Lay1Cal) { eFilamentAction = FilamentAction::None; // i.e. non-autoLoad } } void lcd_generic_preheat_menu() { MENU_BEGIN(); if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE)) { if (eFilamentAction == FilamentAction::Lay1Cal) { MENU_ITEM_FUNCTION_P(_T(MSG_BACK), mFilamentBack); } else { MENU_ITEM_FUNCTION_P(_T(MSG_MAIN), mFilamentBack); } } if (farm_mode) { MENU_ITEM_FUNCTION_P(PSTR("farm - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FARM_PREHEAT_HPB_TEMP)), mFilamentItem_farm); MENU_ITEM_FUNCTION_P(PSTR("nozzle - " STRINGIFY(FARM_PREHEAT_HOTEND_TEMP) "/0"), mFilamentItem_farm_nozzle); } else { MENU_ITEM_SUBMENU_P(PSTR("PLA - " STRINGIFY(PLA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PLA_PREHEAT_HPB_TEMP)),mFilamentItem_PLA); MENU_ITEM_SUBMENU_P(PSTR("PET - " STRINGIFY(PET_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PET_PREHEAT_HPB_TEMP)),mFilamentItem_PET); MENU_ITEM_SUBMENU_P(PSTR("ASA - " STRINGIFY(ASA_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ASA_PREHEAT_HPB_TEMP)),mFilamentItem_ASA); MENU_ITEM_SUBMENU_P(PSTR("PC - " STRINGIFY(PC_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PC_PREHEAT_HPB_TEMP)),mFilamentItem_PC); MENU_ITEM_SUBMENU_P(PSTR("PVB - " STRINGIFY(PVB_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PVB_PREHEAT_HPB_TEMP)),mFilamentItem_PVB); MENU_ITEM_SUBMENU_P(PSTR("ABS - " STRINGIFY(ABS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(ABS_PREHEAT_HPB_TEMP)),mFilamentItem_ABS); MENU_ITEM_SUBMENU_P(PSTR("HIPS - " STRINGIFY(HIPS_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(HIPS_PREHEAT_HPB_TEMP)),mFilamentItem_HIPS); MENU_ITEM_SUBMENU_P(PSTR("PP - " STRINGIFY(PP_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(PP_PREHEAT_HPB_TEMP)),mFilamentItem_PP); MENU_ITEM_SUBMENU_P(PSTR("FLEX - " STRINGIFY(FLEX_PREHEAT_HOTEND_TEMP) "/" STRINGIFY(FLEX_PREHEAT_HPB_TEMP)),mFilamentItem_FLEX); } if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE) && eFilamentAction == FilamentAction::Preheat) MENU_ITEM_FUNCTION_P(_T(MSG_COOLDOWN), lcd_cooldown); MENU_END(); } void mFilamentItemForce() { mFilamentItem(target_temperature[0],target_temperature_bed); } void lcd_unLoadFilament() { eFilamentAction=FilamentAction::UnLoad; preheat_or_continue(); } static void mmu_unload_filament() { eFilamentAction = FilamentAction::MmuUnLoad; preheat_or_continue(); } void lcd_wait_interact() { lcd_clear(); lcd_set_cursor(0, 1); #ifdef SNMM lcd_puts_P(_i("Prepare new filament"));////MSG_PREPARE_FILAMENT c=20 r=1 #else lcd_puts_P(_i("Insert filament"));////MSG_INSERT_FILAMENT c=20 #endif if (!fsensor_autoload_enabled) { lcd_puts_at_P(0, 2, _i("and press the knob"));////MSG_PRESS c=20 r=2 } } void lcd_change_success() { lcd_clear(); lcd_puts_at_P(0, 2, _i("Change success!"));////MSG_CHANGE_SUCCESS } static void lcd_loading_progress_bar(uint16_t loading_time_ms) { for (uint_least8_t i = 0; i < 20; i++) { lcd_putc_at(i, 3, '.'); //loading_time_ms/20 delay for (uint_least8_t j = 0; j < 5; j++) { delay_keep_alive(loading_time_ms / 100); } } } void lcd_loading_color() { //we are extruding 25mm with feedrate 200mm/min -> 7.5 seconds for whole action, 0.375 s for one character lcd_clear(); lcd_puts_at_P(0, 0, _i("Loading color"));////MSG_LOADING_COLOR lcd_puts_at_P(0, 2, _T(MSG_PLEASE_WAIT)); lcd_loading_progress_bar((FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL); //show progress bar during filament loading slow sequence } void lcd_loading_filament() { lcd_clear(); lcd_puts_at_P(0, 0, _T(MSG_LOADING_FILAMENT)); lcd_puts_at_P(0, 2, _T(MSG_PLEASE_WAIT)); #ifdef SNMM for (int i = 0; i < 20; i++) { lcd_set_cursor(i, 3); lcd_print('.'); for (int j = 0; j < 10 ; j++) { manage_heater(); manage_inactivity(true); _delay(153); } } #else //SNMM uint16_t slow_seq_time = (FILAMENTCHANGE_FINALFEED * 1000ul) / FILAMENTCHANGE_EFEED_FINAL; uint16_t fast_seq_time = (FILAMENTCHANGE_FIRSTFEED * 1000ul) / FILAMENTCHANGE_EFEED_FIRST; lcd_loading_progress_bar(slow_seq_time + fast_seq_time); //show progress bar for total time of filament loading fast + slow sequence #endif //SNMM } void lcd_alright() { int enc_dif = 0; int cursor_pos = 1; lcd_clear(); lcd_puts_at_P(0, 0, _i("Changed correctly?"));////MSG_CORRECTLY c=20 lcd_puts_at_P(1, 1, _T(MSG_YES)); lcd_puts_at_P(1, 2, _i("Filament not loaded"));////MSG_NOT_LOADED c=19 lcd_puts_at_P(1, 3, _i("Color not correct"));////MSG_NOT_COLOR lcd_putc_at(0, 1, '>'); enc_dif = lcd_encoder_diff; lcd_consume_click(); while (lcd_change_fil_state == 0) { manage_heater(); manage_inactivity(true); if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) { if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) { if (enc_dif > lcd_encoder_diff ) { cursor_pos --; } if (enc_dif < lcd_encoder_diff ) { cursor_pos ++; } if (cursor_pos > 3) { cursor_pos = 3; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } if (cursor_pos < 1) { cursor_pos = 1; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } lcd_puts_at_P(0, 1, PSTR(" \n \n ")); lcd_putc_at(0, cursor_pos, '>'); enc_dif = lcd_encoder_diff; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); _delay(100); } } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); lcd_change_fil_state = cursor_pos; _delay(500); } }; lcd_clear(); lcd_return_to_status(); } void show_preheat_nozzle_warning() { lcd_clear(); lcd_puts_at_P(0, 0, _T(MSG_ERROR)); lcd_puts_at_P(0, 2, _T(MSG_PREHEAT_NOZZLE)); _delay(2000); lcd_clear(); } void lcd_load_filament_color_check() { bool clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true); while (!clean) { lcd_update_enable(true); lcd_update(2); load_filament_final_feed(); st_synchronize(); clean = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_CLEAN), false, true); } } #ifdef FILAMENT_SENSOR static void lcd_menu_AutoLoadFilament() { uint8_t nlines; lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament is active, just press the knob and insert filament..."),nlines);////MSG_AUTOLOADING_ENABLED c=20 r=4 menu_back_if_clicked(); } #endif //FILAMENT_SENSOR static void preheat_or_continue() { bFilamentFirstRun = false; if (target_temperature[0] >= EXTRUDE_MINTEMP) { bFilamentPreheatState = true; mFilamentItem(target_temperature[0], target_temperature_bed); } else lcd_generic_preheat_menu(); } static void lcd_LoadFilament() { eFilamentAction = FilamentAction::Load; preheat_or_continue(); } //! @brief Show filament used a print time //! //! If printing current print statistics are shown //! //! @code{.unparsed} //! |01234567890123456789| //! |Filament used: | c=19 //! | 0000.00m | //! |Print time: | c=19 r=1 //! | 00h 00m 00s | //! ---------------------- //! @endcode //! //! If not printing, total statistics are shown //! //! @code{.unparsed} //! |01234567890123456789| //! |Total filament: | c=19 r=1 //! | 0000.00m | //! |Total print time: | c=19 r=1 //! | 00d 00h 00m | //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. Translations missing for "d"days, "h"ours, "m"inutes", "s"seconds". void lcd_menu_statistics() { lcd_timeoutToStatus.stop(); //infinite timeout if (IS_SD_PRINTING) { const float _met = ((float)total_filament_used) / (100000.f); const uint32_t _t = (_millis() - starttime) / 1000ul; const uint32_t _h = _t / 3600; const uint8_t _m = (_t - (_h * 3600ul)) / 60ul; const uint8_t _s = _t - ((_h * 3600ul) + (_m * 60ul)); lcd_home(); lcd_printf_P(_N( "%S:\n" "%18.2fm \n" "%S:\n" "%10ldh %02hhdm %02hhds" ), _i("Filament used"), _met, ////c=19 _i("Print time"), _h, _m, _s); ////c=19 r=1 menu_back_if_clicked_fb(); } else { unsigned long _filament = eeprom_read_dword((uint32_t *)EEPROM_FILAMENTUSED); unsigned long _time = eeprom_read_dword((uint32_t *)EEPROM_TOTALTIME); //in minutes uint8_t _hours, _minutes; uint32_t _days; float _filament_m = (float)_filament/100; _days = _time / 1440; _hours = (_time - (_days * 1440)) / 60; _minutes = _time - ((_days * 1440) + (_hours * 60)); lcd_home(); lcd_printf_P(_N( "%S:\n" "%18.2fm \n" "%S:\n" "%10ldd %02hhdh %02hhdm" ), _i("Total filament"), _filament_m, ////c=19 r=1 _i("Total print time"), _days, _hours, _minutes); ////c=19 r=1 menu_back_if_clicked_fb(); } } static void _lcd_move(const char *name, int axis, int min, int max) { typedef struct { // 2bytes total bool initialized; // 1byte bool endstopsEnabledPrevious; // 1byte } _menu_data_t; static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data"); _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]); if (!_md->initialized) { _md->endstopsEnabledPrevious = enable_endstops(false); _md->initialized = true; } if (lcd_encoder != 0) { refresh_cmd_timeout(); if (! planner_queue_full()) { current_position[axis] += float((int)lcd_encoder) * move_menu_scale; if (min_software_endstops && current_position[axis] < min) current_position[axis] = min; if (max_software_endstops && current_position[axis] > max) current_position[axis] = max; lcd_encoder = 0; world2machine_clamp(current_position[X_AXIS], current_position[Y_AXIS]); plan_buffer_line_curposXYZE(manual_feedrate[axis] / 60); lcd_draw_update = 1; } } if (lcd_draw_update) { lcd_set_cursor(0, 1); menu_draw_float31(name, current_position[axis]); } if (menu_leaving || LCD_CLICKED) (void)enable_endstops(_md->endstopsEnabledPrevious); if (LCD_CLICKED) menu_back(); } void lcd_move_e() { if (degHotend0() > EXTRUDE_MINTEMP) { if (lcd_encoder != 0) { refresh_cmd_timeout(); if (! planner_queue_full()) { current_position[E_AXIS] += float((int)lcd_encoder) * move_menu_scale; lcd_encoder = 0; plan_buffer_line_curposXYZE(manual_feedrate[E_AXIS] / 60); lcd_draw_update = 1; } } if (lcd_draw_update) { lcd_set_cursor(0, 1); // Note: the colon behind the text is necessary to greatly shorten // the implementation of menu_draw_float31 menu_draw_float31(PSTR("Extruder:"), current_position[E_AXIS]); } if (LCD_CLICKED) menu_back(); } else { show_preheat_nozzle_warning(); lcd_return_to_status(); } } //! @brief Show measured Y distance of front calibration points from Y_MIN_POS //! If those points are detected too close to edge of reachable area, their confidence is lowered. //! This functionality is applied more often for MK2 printers. //! @code{.unparsed} //! |01234567890123456789| //! |Y distance from min | c=19 r=1 //! | -------------- | STR_SEPARATOR //! |Left: 00.00mm | c=11 r=1 //! |Right: 00.00mm | c=11 r=1 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_xyz_y_min() { float distanceMin[2]; count_xyz_details(distanceMin); lcd_home(); lcd_printf_P(_N( "%S:\n" "%S\n" "%S:\n" "%S:" ), _i("Y distance from min"), ////c=19 r=1 separator, _i("Left"), ////c=11 r=1 _i("Right") ////c=11 r=1 ); for (uint8_t i = 0; i < 2; i++) { lcd_set_cursor(11,2+i); if (distanceMin[i] >= 200) lcd_puts_P(_T(MSG_NA)); ////c=3 r=1 else lcd_printf_P(_N("%6.2fmm"), distanceMin[i]); } if (lcd_clicked()) menu_goto(lcd_menu_xyz_skew, 0, true, true); } //@brief Show measured axis skewness float _deg(float rad) { return rad * 180 / M_PI; } //! @brief Show Measured XYZ Skew //! //! @code{.unparsed} //! |01234567890123456789| //! |Measured skew: 0.00D| c=13 r=1 //! | -------------- | STR_SEPARATOR //! |Slight skew: 0.12D| c=13 r=1 c=4 r=1 //! |Severe skew: 0.25D| c=13 r=1 c=4 r=1 //! ---------------------- //! D - Degree sysmbol LCD_STR_DEGREE //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_xyz_skew() { float angleDiff = eeprom_read_float((float*)(EEPROM_XYZ_CAL_SKEW)); lcd_home(); lcd_printf_P(_N( "%S:\n" "%S\n" "%-15.15S%3.2f\x01\n" "%-15.15S%3.2f\x01" ), _i("Measured skew"), ////c=13 r=1 separator, _i("Slight skew:"), _deg(bed_skew_angle_mild), ////c=13 r=1 c=4 r=1 _i("Severe skew:"), _deg(bed_skew_angle_extreme) ////c=13 r=1 c=4 r=1 ); if (angleDiff < 100){ lcd_set_cursor(15,0); lcd_printf_P(_N("%3.2f\x01"), _deg(angleDiff)); } else{ lcd_puts_at_P(15,0, _T(MSG_NA)); } if (lcd_clicked()) menu_goto(lcd_menu_xyz_offset, 0, true, true); } //! @brief Show measured bed offset from expected position //! //! @code{.unparsed} //! |01234567890123456789| //! |[0;0] point offset | c=20 r=1 //! | -------------- | STR_SEPARATOR //! |X: 000.00mm| c=10 r=1 //! |Y: 000.00mm| c=10 r=1 //! ---------------------- //! @endcode //! @todo Positioning of the messages and values on LCD aren't fixed to their exact place. This causes issues with translations. static void lcd_menu_xyz_offset() { lcd_puts_at_P(0, 0, _i("[0;0] point offset"));////MSG_MEASURED_OFFSET lcd_puts_at_P(0, 1, separator); lcd_puts_at_P(0, 2, PSTR("X")); ////c=10 r=1 lcd_puts_at_P(0, 3, PSTR("Y")); ////c=10 r=1 float vec_x[2]; float vec_y[2]; float cntr[2]; world2machine_read_valid(vec_x, vec_y, cntr); for (uint_least8_t i = 0; i < 2; i++) { lcd_set_cursor((cntr[i] < 0) ? 10 : 11, i+2); lcd_print(cntr[i]); lcd_puts_at_P(16, i + 2, PSTR("mm")); } menu_back_if_clicked(); } // Save a single axis babystep value. void EEPROM_save_B(int pos, int* value) { eeprom_update_byte((unsigned char*)pos, (unsigned char)((*value) & 0xff)); eeprom_update_byte((unsigned char*)pos + 1, (unsigned char)((*value) >> 8)); } // Read a single axis babystep value. void EEPROM_read_B(int pos, int* value) { *value = (int)eeprom_read_byte((unsigned char*)pos) | (int)(eeprom_read_byte((unsigned char*)pos + 1) << 8); } // Note: the colon behind the text (X, Y, Z) is necessary to greatly shorten // the implementation of menu_draw_float31 static void lcd_move_x() { _lcd_move(PSTR("X:"), X_AXIS, X_MIN_POS, X_MAX_POS); } static void lcd_move_y() { _lcd_move(PSTR("Y:"), Y_AXIS, Y_MIN_POS, Y_MAX_POS); } static void lcd_move_z() { _lcd_move(PSTR("Z:"), Z_AXIS, Z_MIN_POS, Z_MAX_POS); } /** * @brief Adjust first layer offset from bed if axis is Z_AXIS * * If menu is left (button pushed or timed out), value is stored to EEPROM and * if the axis is Z_AXIS, CALIBRATION_STATUS_CALIBRATED is also stored. * Purpose of this function for other axis then Z is unknown. * * @param axis AxisEnum X_AXIS Y_AXIS Z_AXIS * other value leads to storing Z_AXIS * @param msg text to be displayed */ static void lcd_babystep_z() { typedef struct { int8_t status; int16_t babystepMemZ; float babystepMemMMZ; } _menu_data_t; static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data"); _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]); if (_md->status == 0) { // Menu was entered. // Initialize its status. _md->status = 1; check_babystep(); if(!eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))){ _md->babystepMemZ = 0; } else{ _md->babystepMemZ = eeprom_read_word(reinterpret_cast(&(EEPROM_Sheets_base-> s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset))); } // same logic as in babystep_load if (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST) _md->babystepMemZ = 0; _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS]; lcd_draw_update = 1; //SERIAL_ECHO("Z baby step: "); //SERIAL_ECHO(_md->babystepMem[2]); // Wait 90 seconds before closing the live adjust dialog. lcd_timeoutToStatus.start(); } if (lcd_encoder != 0) { if (homing_flag) lcd_encoder = 0; _md->babystepMemZ += (int)lcd_encoder; if (_md->babystepMemZ < Z_BABYSTEP_MIN) _md->babystepMemZ = Z_BABYSTEP_MIN; //-3999 -> -9.99 mm else if (_md->babystepMemZ > Z_BABYSTEP_MAX) _md->babystepMemZ = Z_BABYSTEP_MAX; //0 else { CRITICAL_SECTION_START babystepsTodo[Z_AXIS] += (int)lcd_encoder; CRITICAL_SECTION_END } _md->babystepMemMMZ = _md->babystepMemZ/cs.axis_steps_per_unit[Z_AXIS]; _delay(50); lcd_encoder = 0; lcd_draw_update = 1; } if (lcd_draw_update) { SheetFormatBuffer buffer; menu_format_sheet_E(EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))], buffer); lcd_set_cursor(0, 0); lcd_print(buffer.c); lcd_set_cursor(0, 1); menu_draw_float13(_i("Adjusting Z:"), _md->babystepMemMMZ); ////MSG_BABYSTEPPING_Z c=15 Beware: must include the ':' as its last character } if (LCD_CLICKED || menu_leaving) { // Only update the EEPROM when leaving the menu. uint8_t active_sheet=eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)); eeprom_update_word(reinterpret_cast(&(EEPROM_Sheets_base->s[active_sheet].z_offset)),_md->babystepMemZ); eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].bed_temp),target_temperature_bed); #ifdef PINDA_THERMISTOR eeprom_update_byte(&(EEPROM_Sheets_base->s[active_sheet].pinda_temp),current_temperature_pinda); #endif //PINDA_THERMISTOR calibration_status_store(CALIBRATION_STATUS_CALIBRATED); } if (LCD_CLICKED) menu_back(); } typedef struct { // 12bytes + 9bytes = 21bytes total menu_data_edit_t reserved; //12 bytes reserved for number editing functions int8_t status; // 1byte int16_t left; // 2byte int16_t right; // 2byte int16_t front; // 2byte int16_t rear; // 2byte } _menu_data_adjust_bed_t; static_assert(sizeof(menu_data)>= sizeof(_menu_data_adjust_bed_t),"_menu_data_adjust_bed_t doesn't fit into menu_data"); void lcd_adjust_bed_reset(void) { eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1); eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_LEFT , 0); eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, 0); eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_FRONT, 0); eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_REAR , 0); _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]); _md->status = 0; } //! @brief Show Bed level correct //! //! @code{.unparsed} //! |01234567890123456789| //! |Settings: | MSG_SETTINGS //! |Left side [um]: | MSG_BED_CORRECTION_LEFT //! |Right side[um]: | MSG_BED_CORRECTION_RIGHT //! |Front side[um]: | MSG_BED_CORRECTION_FRONT //! |Rear side [um]: | MSG_BED_CORRECTION_REAR //! |Reset | MSG_BED_CORRECTION_RESET //! ---------------------- //! @endcode void lcd_adjust_bed(void) { _menu_data_adjust_bed_t* _md = (_menu_data_adjust_bed_t*)&(menu_data[0]); if (_md->status == 0) { // Menu was entered. _md->left = 0; _md->right = 0; _md->front = 0; _md->rear = 0; if (eeprom_read_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID) == 1) { _md->left = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT); _md->right = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT); _md->front = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT); _md->rear = eeprom_read_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR); } _md->status = 1; } MENU_BEGIN(); // leaving menu - this condition must be immediately before MENU_ITEM_BACK_P ON_MENU_LEAVE( eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_LEFT, _md->left); eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_RIGHT, _md->right); eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_FRONT, _md->front); eeprom_update_int8((unsigned char*)EEPROM_BED_CORRECTION_REAR, _md->rear); eeprom_update_byte((unsigned char*)EEPROM_BED_CORRECTION_VALID, 1); ); MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); MENU_ITEM_EDIT_int3_P(_i("Left side [um]"), &_md->left, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_LEFT c=14 r=1 MENU_ITEM_EDIT_int3_P(_i("Right side[um]"), &_md->right, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_RIGHT c=14 r=1 MENU_ITEM_EDIT_int3_P(_i("Front side[um]"), &_md->front, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_FRONT c=14 r=1 MENU_ITEM_EDIT_int3_P(_i("Rear side [um]"), &_md->rear, -BED_ADJUSTMENT_UM_MAX, BED_ADJUSTMENT_UM_MAX);////MSG_BED_CORRECTION_REAR c=14 r=1 MENU_ITEM_FUNCTION_P(_T(MSG_RESET), lcd_adjust_bed_reset);////MSG_RESET c=14 MENU_END(); } //! @brief Show PID Extruder //! //! @code{.unparsed} //! |01234567890123456789| //! | Set temperature: | MSG_SET_TEMPERATURE //! | | //! | 210 | //! | | //! ---------------------- //! @endcode void pid_extruder() { lcd_clear(); lcd_puts_at_P(1, 0, _i("Set temperature:"));////MSG_SET_TEMPERATURE c=19 r=1 pid_temp += int(lcd_encoder); if (pid_temp > HEATER_0_MAXTEMP) pid_temp = HEATER_0_MAXTEMP; if (pid_temp < HEATER_0_MINTEMP) pid_temp = HEATER_0_MINTEMP; lcd_encoder = 0; lcd_set_cursor(1, 2); lcd_print(ftostr3(pid_temp)); if (lcd_clicked()) { lcd_commands_type = LcdCommands::PidExtruder; lcd_return_to_status(); lcd_update(2); } } /* void lcd_adjust_z() { int enc_dif = 0; int cursor_pos = 1; int fsm = 0; lcd_clear(); lcd_set_cursor(0, 0); lcd_puts_P(_i("Auto adjust Z?"));////MSG_ADJUSTZ lcd_set_cursor(1, 1); lcd_puts_P(_T(MSG_YES)); lcd_set_cursor(1, 2); lcd_puts_P(_T(MSG_NO)); lcd_set_cursor(0, 1); lcd_print('>'); enc_dif = lcd_encoder_diff; while (fsm == 0) { manage_heater(); manage_inactivity(true); if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) { if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) { if (enc_dif > lcd_encoder_diff ) { cursor_pos --; } if (enc_dif < lcd_encoder_diff ) { cursor_pos ++; } if (cursor_pos > 2) { cursor_pos = 2; } if (cursor_pos < 1) { cursor_pos = 1; } lcd_set_cursor(0, 1); lcd_print(' '); lcd_set_cursor(0, 2); lcd_print(' '); lcd_set_cursor(0, cursor_pos); lcd_print('>'); enc_dif = lcd_encoder_diff; _delay(100); } } if (lcd_clicked()) { fsm = cursor_pos; if (fsm == 1) { int babystepLoadZ = 0; EEPROM_read_B(EEPROM_BABYSTEP_Z, &babystepLoadZ); CRITICAL_SECTION_START babystepsTodo[Z_AXIS] = babystepLoadZ; CRITICAL_SECTION_END } else { int zero = 0; EEPROM_save_B(EEPROM_BABYSTEP_X, &zero); EEPROM_save_B(EEPROM_BABYSTEP_Y, &zero); EEPROM_save_B(EEPROM_BABYSTEP_Z, &zero); } _delay(500); } }; lcd_clear(); lcd_return_to_status(); }*/ #ifdef PINDA_THERMISTOR bool lcd_wait_for_pinda(float temp) { lcd_set_custom_characters_degree(); setAllTargetHotends(0); setTargetBed(0); LongTimer pinda_timeout; pinda_timeout.start(); bool target_temp_reached = true; while (current_temperature_pinda > temp){ lcd_display_message_fullscreen_P(_i("Waiting for PINDA probe cooling"));////MSG_WAITING_TEMP_PINDA c=20 r=3 lcd_set_cursor(0, 4); lcd_print(LCD_STR_THERMOMETER[0]); lcd_print(ftostr3(current_temperature_pinda)); lcd_print('/'); lcd_print(ftostr3(temp)); lcd_print(LCD_STR_DEGREE); delay_keep_alive(1000); serialecho_temperatures(); if (pinda_timeout.expired(8 * 60 * 1000ul)) { //PINDA cooling from 60 C to 35 C takes about 7 minutes target_temp_reached = false; break; } } lcd_set_custom_characters_arrows(); lcd_update_enable(true); return target_temp_reached; } #endif //PINDA_THERMISTOR void lcd_wait_for_heater() { lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING)); lcd_set_degree(); lcd_set_cursor(0, 4); lcd_print(LCD_STR_THERMOMETER[0]); lcd_print(ftostr3(degHotend(active_extruder))); lcd_print('/'); lcd_print(ftostr3(degTargetHotend(active_extruder))); lcd_print(LCD_STR_DEGREE); } void lcd_wait_for_cool_down() { lcd_set_custom_characters_degree(); setAllTargetHotends(0); setTargetBed(0); int fanSpeedBckp = fanSpeed; fanSpeed = 255; while ((degHotend(0)>MAX_HOTEND_TEMP_CALIBRATION) || (degBed() > MAX_BED_TEMP_CALIBRATION)) { lcd_display_message_fullscreen_P(_i("Waiting for nozzle and bed cooling"));////MSG_WAITING_TEMP c=20 r=3 lcd_set_cursor(0, 4); lcd_print(LCD_STR_THERMOMETER[0]); lcd_print(ftostr3(degHotend(0))); lcd_print("/0"); lcd_print(LCD_STR_DEGREE); lcd_set_cursor(9, 4); lcd_print(LCD_STR_BEDTEMP[0]); lcd_print(ftostr3(degBed())); lcd_print("/0"); lcd_print(LCD_STR_DEGREE); lcd_set_custom_characters(); delay_keep_alive(1000); serialecho_temperatures(); } fanSpeed = fanSpeedBckp; lcd_set_custom_characters_arrows(); lcd_update_enable(true); } // Lets the user move the Z carriage up to the end stoppers. // When done, it sets the current Z to Z_MAX_POS and returns true. // Otherwise the Z calibration is not changed and false is returned. #ifndef TMC2130 bool lcd_calibrate_z_end_stop_manual(bool only_z) { // Don't know where we are. Let's claim we are Z=0, so the soft end stops will not be triggered when moving up. current_position[Z_AXIS] = 0; plan_set_position_curposXYZE(); // Until confirmed by the confirmation dialog. for (;;) { const char *msg = only_z ? _i("Calibrating Z. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.") : _i("Calibrating XYZ. Rotate the knob to move the Z carriage up to the end stoppers. Click when done.");////MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8////MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8 const char *msg_next = lcd_display_message_fullscreen_P(msg); const bool multi_screen = msg_next != NULL; unsigned long previous_millis_msg = _millis(); // Until the user finishes the z up movement. lcd_encoder_diff = 0; lcd_encoder = 0; for (;;) { manage_heater(); manage_inactivity(true); if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) { _delay(50); lcd_encoder += abs(lcd_encoder_diff / ENCODER_PULSES_PER_STEP); lcd_encoder_diff = 0; if (! planner_queue_full()) { // Only move up, whatever direction the user rotates the encoder. current_position[Z_AXIS] += fabs(lcd_encoder); lcd_encoder = 0; plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60); } } if (lcd_clicked()) { // Abort a move if in progress. planner_abort_hard(); while (lcd_clicked()) ; _delay(10); while (lcd_clicked()) ; break; } if (multi_screen && _millis() - previous_millis_msg > 5000) { if (msg_next == NULL) msg_next = msg; msg_next = lcd_display_message_fullscreen_P(msg_next); previous_millis_msg = _millis(); } } // Let the user confirm, that the Z carriage is at the top end stoppers. int8_t result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Are left and right Z~carriages all up?"), false);////MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2 if (result == -1) goto canceled; else if (result == 1) goto calibrated; // otherwise perform another round of the Z up dialog. } calibrated: // Let the machine think the Z axis is a bit higher than it is, so it will not home into the bed // during the search for the induction points. if ((PRINTER_TYPE == PRINTER_MK25) || (PRINTER_TYPE == PRINTER_MK2) || (PRINTER_TYPE == PRINTER_MK2_SNMM)) { current_position[Z_AXIS] = Z_MAX_POS-3.f; } else { current_position[Z_AXIS] = Z_MAX_POS+4.f; } plan_set_position_curposXYZE(); return true; canceled: return false; } #endif // TMC2130 static inline bool pgm_is_whitespace(const char *c_addr) { const char c = pgm_read_byte(c_addr); return c == ' ' || c == '\t' || c == '\r' || c == '\n'; } static inline bool pgm_is_interpunction(const char *c_addr) { const char c = pgm_read_byte(c_addr); return c == '.' || c == ',' || c == ':'|| c == ';' || c == '?' || c == '!' || c == '/'; } /** * @brief show full screen message * * This function is non-blocking * @param msg message to be displayed from PROGMEM * @param nlines * @return rest of the text (to be displayed on next page) */ static const char* lcd_display_message_fullscreen_nonBlocking_P(const char *msg, uint8_t &nlines) { lcd_set_cursor(0, 0); const char *msgend = msg; uint8_t row = 0; bool multi_screen = false; for (; row < 4; ++ row) { while (pgm_is_whitespace(msg)) ++ msg; if (pgm_read_byte(msg) == 0) // End of the message. break; lcd_set_cursor(0, row); uint8_t linelen = min(strlen_P(msg), 20); const char *msgend2 = msg + linelen; msgend = msgend2; if (row == 3 && linelen == 20) { // Last line of the display, full line shall be displayed. // Find out, whether this message will be split into multiple screens. while (pgm_is_whitespace(msgend)) ++ msgend; multi_screen = pgm_read_byte(msgend) != 0; if (multi_screen) msgend = (msgend2 -= 2); } if (pgm_read_byte(msgend) != 0 && ! pgm_is_whitespace(msgend) && ! pgm_is_interpunction(msgend)) { // Splitting a word. Find the start of the current word. while (msgend > msg && ! pgm_is_whitespace(msgend - 1)) -- msgend; if (msgend == msg) // Found a single long word, which cannot be split. Just cut it. msgend = msgend2; } for (; msg < msgend; ++ msg) { char c = char(pgm_read_byte(msg)); if (c == '~') c = ' '; lcd_print(c); } } if (multi_screen) { // Display the "next screen" indicator character. // lcd_set_custom_characters_arrows(); lcd_set_custom_characters_nextpage(); lcd_set_cursor(19, 3); // Display the down arrow. lcd_print(char(1)); } nlines = row; return multi_screen ? msgend : NULL; } const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines) { // Disable update of the screen by the usual lcd_update(0) routine. lcd_update_enable(false); lcd_clear(); // uint8_t nlines; return lcd_display_message_fullscreen_nonBlocking_P(msg, nlines); } const char* lcd_display_message_fullscreen_P(const char *msg) { uint8_t nlines; return lcd_display_message_fullscreen_P(msg, nlines); } /** * @brief show full screen message and wait * * This function is blocking. * @param msg message to be displayed from PROGMEM */ void lcd_show_fullscreen_message_and_wait_P(const char *msg) { LcdUpdateDisabler lcdUpdateDisabler; const char *msg_next = lcd_display_message_fullscreen_P(msg); bool multi_screen = msg_next != NULL; lcd_set_custom_characters_nextpage(); lcd_consume_click(); KEEPALIVE_STATE(PAUSED_FOR_USER); // Until confirmed by a button click. for (;;) { if (!multi_screen) { lcd_set_cursor(19, 3); // Display the confirm char. lcd_print(char(2)); } // Wait for 5 seconds before displaying the next text. for (uint8_t i = 0; i < 100; ++ i) { delay_keep_alive(50); if (lcd_clicked()) { if (msg_next == NULL) { KEEPALIVE_STATE(IN_HANDLER); lcd_set_custom_characters(); lcd_update_enable(true); lcd_update(2); return; } else { break; } } } if (multi_screen) { if (msg_next == NULL) msg_next = msg; msg_next = lcd_display_message_fullscreen_P(msg_next); if (msg_next == NULL) { lcd_set_cursor(19, 3); // Display the confirm char. lcd_print(char(2)); } } } } bool lcd_wait_for_click_delay(uint16_t nDelay) // nDelay :: timeout [s] (0 ~ no timeout) // true ~ clicked, false ~ delayed { bool bDelayed; long nTime0 = _millis()/1000; lcd_consume_click(); KEEPALIVE_STATE(PAUSED_FOR_USER); for (;;) { manage_heater(); manage_inactivity(true); bDelayed = ((_millis()/1000-nTime0) > nDelay); bDelayed = (bDelayed && (nDelay != 0)); // 0 ~ no timeout, always waiting for click if (lcd_clicked() || bDelayed) { KEEPALIVE_STATE(IN_HANDLER); return(!bDelayed); } } } void lcd_wait_for_click() { lcd_wait_for_click_delay(0); } //! @brief Show multiple screen message with yes and no possible choices and wait with possible timeout //! @param msg Message to show //! @param allow_timeouting if true, allows time outing of the screen //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected //! @retval 1 yes choice selected by user //! @retval 0 no choice selected by user //! @retval -1 screen timed out int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes) //currently just max. n*4 + 3 lines supported (set in language header files) { return lcd_show_multiscreen_message_two_choices_and_wait_P(msg, allow_timeouting, default_yes, _T(MSG_YES), _T(MSG_NO)); } //! @brief Show multiple screen message with two possible choices and wait with possible timeout //! @param msg Message to show //! @param allow_timeouting if true, allows time outing of the screen //! @param default_first if true, fist choice is selected by default, otherwise second choice is preselected //! @param first_choice text caption of first possible choice //! @param second_choice text caption of second possible choice //! @retval 1 first choice selected by user //! @retval 0 second choice selected by user //! @retval -1 screen timed out int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_first, const char *first_choice, const char *second_choice) { const char *msg_next = lcd_display_message_fullscreen_P(msg); bool multi_screen = msg_next != NULL; bool yes = default_first ? true : false; // Wait for user confirmation or a timeout. unsigned long previous_millis_cmd = _millis(); int8_t enc_dif = lcd_encoder_diff; lcd_consume_click(); //KEEPALIVE_STATE(PAUSED_FOR_USER); for (;;) { for (uint8_t i = 0; i < 100; ++i) { delay_keep_alive(50); if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS) return -1; manage_heater(); manage_inactivity(true); if (abs(enc_dif - lcd_encoder_diff) > 4) { if (msg_next == NULL) { lcd_set_cursor(0, 3); if (enc_dif < lcd_encoder_diff && yes) { lcd_print(' '); lcd_putc_at(7, 3, '>'); yes = false; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); } else if (enc_dif > lcd_encoder_diff && !yes) { lcd_print('>'); lcd_putc_at(7, 3, ' '); yes = true; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); } enc_dif = lcd_encoder_diff; } else { Sound_MakeSound(e_SOUND_TYPE_BlindAlert); break; //turning knob skips waiting loop } } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); if (msg_next == NULL) { //KEEPALIVE_STATE(IN_HANDLER); lcd_set_custom_characters(); return yes; } else break; } } if (multi_screen) { if (msg_next == NULL) { msg_next = msg; } msg_next = lcd_display_message_fullscreen_P(msg_next); } if (msg_next == NULL) { lcd_set_cursor(0, 3); if (yes) lcd_print('>'); lcd_puts_at_P(1, 3, first_choice); lcd_set_cursor(7, 3); if (!yes) lcd_print('>'); lcd_puts_at_P(8, 3, second_choice); } } } //! @brief Show single screen message with yes and no possible choices and wait with possible timeout //! @param msg Message to show //! @param allow_timeouting if true, allows time outing of the screen //! @param default_yes if true, yes choice is selected by default, otherwise no choice is preselected //! @retval 1 yes choice selected by user //! @retval 0 no choice selected by user //! @retval -1 screen timed out int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes) { lcd_display_message_fullscreen_P(msg); if (default_yes) { lcd_putc_at(0, 2, '>'); lcd_puts_P(_T(MSG_YES)); lcd_puts_at_P(1, 3, _T(MSG_NO)); } else { lcd_puts_at_P(1, 2, _T(MSG_YES)); lcd_putc_at(0, 3, '>'); lcd_puts_P(_T(MSG_NO)); } int8_t retval = default_yes ? true : false; // Wait for user confirmation or a timeout. unsigned long previous_millis_cmd = _millis(); int8_t enc_dif = lcd_encoder_diff; lcd_consume_click(); KEEPALIVE_STATE(PAUSED_FOR_USER); for (;;) { if (allow_timeouting && _millis() - previous_millis_cmd > LCD_TIMEOUT_TO_STATUS) { retval = -1; break; } manage_heater(); manage_inactivity(true); if (abs(enc_dif - lcd_encoder_diff) > 4) { lcd_set_cursor(0, 2); if (enc_dif < lcd_encoder_diff && retval) { lcd_print(' '); lcd_putc_at(0, 3, '>'); retval = 0; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); } else if (enc_dif > lcd_encoder_diff && !retval) { lcd_print('>'); lcd_putc_at(0, 3, ' '); retval = 1; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); } enc_dif = lcd_encoder_diff; } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); KEEPALIVE_STATE(IN_HANDLER); break; } } lcd_encoder_diff = 0; return retval; } void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask) { const char *msg = NULL; if (result == BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND) { lcd_show_fullscreen_message_and_wait_P(_i("XYZ calibration failed. Bed calibration point was not found."));////MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=8 } else if (result == BED_SKEW_OFFSET_DETECTION_FITTING_FAILED) { if (point_too_far_mask == 0) msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED); else if (point_too_far_mask == 2 || point_too_far_mask == 7) // Only the center point or all the three front points. msg = _i("XYZ calibration failed. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=8 else if ((point_too_far_mask & 1) == 0) // The right and maybe the center point out of reach. msg = _i("XYZ calibration failed. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=8 else // The left and maybe the center point out of reach. msg = _i("XYZ calibration failed. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8 lcd_show_fullscreen_message_and_wait_P(msg); } else { if (point_too_far_mask != 0) { if (point_too_far_mask == 2 || point_too_far_mask == 7) // Only the center point or all the three front points. msg = _i("XYZ calibration compromised. Front calibration points not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8 else if ((point_too_far_mask & 1) == 0) // The right and maybe the center point out of reach. msg = _i("XYZ calibration compromised. Right front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8 else // The left and maybe the center point out of reach. msg = _i("XYZ calibration compromised. Left front calibration point not reachable.");////MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8 lcd_show_fullscreen_message_and_wait_P(msg); } if (point_too_far_mask == 0 || result > 0) { switch (result) { default: // should not happen msg = _T(MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED); break; case BED_SKEW_OFFSET_DETECTION_PERFECT: msg = _i("XYZ calibration ok. X/Y axes are perpendicular. Congratulations!");////MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8 break; case BED_SKEW_OFFSET_DETECTION_SKEW_MILD: msg = _i("XYZ calibration all right. X/Y axes are slightly skewed. Good job!");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8 break; case BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME: msg = _i("XYZ calibration all right. Skew will be corrected automatically.");////MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8 break; } lcd_show_fullscreen_message_and_wait_P(msg); } } } void lcd_temp_cal_show_result(bool result) { custom_message_type = CustomMsg::Status; disable_x(); disable_y(); disable_z(); disable_e0(); disable_e1(); disable_e2(); setTargetBed(0); //set bed target temperature back to 0 if (result == true) { eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 1); SERIAL_ECHOLNPGM("Temperature calibration done. Continue with pressing the knob."); lcd_show_fullscreen_message_and_wait_P(_T(MSG_TEMP_CALIBRATION_DONE)); eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 1); } else { eeprom_update_byte((uint8_t*)EEPROM_CALIBRATION_STATUS_PINDA, 0); SERIAL_ECHOLNPGM("Temperature calibration failed. Continue with pressing the knob."); lcd_show_fullscreen_message_and_wait_P(_i("Temperature calibration failed"));////MSG_TEMP_CAL_FAILED c=20 r=8 eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, 0); } lcd_update_enable(true); lcd_update(2); } static void lcd_show_end_stops() { lcd_puts_at_P(0, 0, (PSTR("End stops diag"))); lcd_puts_at_P(0, 1, (READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) ? (PSTR("X1")) : (PSTR("X0"))); lcd_puts_at_P(0, 2, (READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) ? (PSTR("Y1")) : (PSTR("Y0"))); lcd_puts_at_P(0, 3, (READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING) ? (PSTR("Z1")) : (PSTR("Z0"))); } #ifndef TMC2130 static void menu_show_end_stops() { lcd_show_end_stops(); if (LCD_CLICKED) menu_back(); } #endif // not defined TMC2130 // Lets the user move the Z carriage up to the end stoppers. // When done, it sets the current Z to Z_MAX_POS and returns true. // Otherwise the Z calibration is not changed and false is returned. void lcd_diag_show_end_stops() { lcd_clear(); lcd_consume_click(); for (;;) { manage_heater(); manage_inactivity(true); lcd_show_end_stops(); if (lcd_clicked()) { break; } } lcd_clear(); lcd_return_to_status(); } static void lcd_print_state(uint8_t state) { switch (state) { case STATE_ON: lcd_puts_P(_N(" 1")); break; case STATE_OFF: lcd_puts_P(_N(" 0")); break; default: lcd_puts_P(_T(MSG_NA)); break; } } static void lcd_show_sensors_state() { //0: N/A; 1: OFF; 2: ON uint8_t pinda_state = STATE_NA; uint8_t finda_state = STATE_NA; uint8_t idler_state = STATE_NA; pinda_state = READ(Z_MIN_PIN); if (mmu_enabled && ((_millis() - mmu_last_finda_response) < 1000ul) ) { finda_state = mmu_finda; } if (ir_sensor_detected) { idler_state = !READ(IR_SENSOR_PIN); } lcd_puts_at_P(0, 0, _i("Sensor state")); lcd_puts_at_P(1, 1, _i("PINDA:")); lcd_set_cursor(LCD_WIDTH - 4, 1); lcd_print_state(pinda_state); lcd_puts_at_P(1, 2, _i("FINDA:")); lcd_set_cursor(LCD_WIDTH - 4, 2); lcd_print_state(finda_state); lcd_puts_at_P(1, 3, _i("IR:")); lcd_set_cursor(LCD_WIDTH - 4, 3); lcd_print_state(idler_state); } void lcd_menu_show_sensors_state() // NOT static due to using inside "Marlin_main" module ("manage_inactivity()") { lcd_timeoutToStatus.stop(); lcd_show_sensors_state(); if(LCD_CLICKED) { lcd_timeoutToStatus.start(); menu_back(); } } void prusa_statistics_err(char c){ SERIAL_ECHOPGM("{[ERR:"); SERIAL_ECHO(c); SERIAL_ECHO(']'); prusa_stat_farm_number(); } static void prusa_statistics_case0(uint8_t statnr){ SERIAL_ECHO('{'); prusa_stat_printerstatus(statnr); prusa_stat_farm_number(); prusa_stat_printinfo(); } void prusa_statistics(int _message, uint8_t _fil_nr) { #ifdef DEBUG_DISABLE_PRUSA_STATISTICS return; #endif //DEBUG_DISABLE_PRUSA_STATISTICS switch (_message) { case 0: // default message if (busy_state == PAUSED_FOR_USER) { prusa_statistics_case0(15); } else if (isPrintPaused) { prusa_statistics_case0(14); } else if (IS_SD_PRINTING || loading_flag) { prusa_statistics_case0(4); } else { SERIAL_ECHO('{'); prusa_stat_printerstatus(1); prusa_stat_farm_number(); prusa_stat_diameter(); status_number = 1; } break; case 1: // 1 heating farm_status = 2; SERIAL_ECHO('{'); prusa_stat_printerstatus(2); prusa_stat_farm_number(); status_number = 2; farm_timer = 1; break; case 2: // heating done farm_status = 3; SERIAL_ECHO('{'); prusa_stat_printerstatus(3); prusa_stat_farm_number(); SERIAL_ECHOLN('}'); status_number = 3; farm_timer = 1; if (IS_SD_PRINTING || loading_flag) { farm_status = 4; SERIAL_ECHO('{'); prusa_stat_printerstatus(4); prusa_stat_farm_number(); status_number = 4; } else { SERIAL_ECHO('{'); prusa_stat_printerstatus(3); prusa_stat_farm_number(); status_number = 3; } farm_timer = 1; break; case 3: // filament change // must do a return here to prevent doing SERIAL_ECHOLN("}") at the very end of this function // saved a considerable amount of FLASH return; break; case 4: // print succesfull SERIAL_ECHOPGM("{[RES:1][FIL:"); MYSERIAL.print(int(_fil_nr)); SERIAL_ECHO(']'); prusa_stat_printerstatus(status_number); prusa_stat_farm_number(); farm_timer = 2; break; case 5: // print not succesfull SERIAL_ECHOPGM("{[RES:0][FIL:"); MYSERIAL.print(int(_fil_nr)); SERIAL_ECHO(']'); prusa_stat_printerstatus(status_number); prusa_stat_farm_number(); farm_timer = 2; break; case 6: // print done SERIAL_ECHOPGM("{[PRN:8]"); prusa_stat_farm_number(); status_number = 8; farm_timer = 2; break; case 7: // print done - stopped SERIAL_ECHOPGM("{[PRN:9]"); prusa_stat_farm_number(); status_number = 9; farm_timer = 2; break; case 8: // printer started SERIAL_ECHOPGM("{[PRN:0]"); prusa_stat_farm_number(); status_number = 0; farm_timer = 2; break; case 20: // echo farm no SERIAL_ECHO('{'); prusa_stat_printerstatus(status_number); prusa_stat_farm_number(); farm_timer = 4; break; case 21: // temperatures SERIAL_ECHO('{'); prusa_stat_temperatures(); prusa_stat_farm_number(); prusa_stat_printerstatus(status_number); break; case 22: // waiting for filament change SERIAL_ECHOPGM("{[PRN:5]"); prusa_stat_farm_number(); status_number = 5; break; case 90: // Error - Thermal Runaway prusa_statistics_err('1'); break; case 91: // Error - Thermal Runaway Preheat prusa_statistics_err('2'); break; case 92: // Error - Min temp prusa_statistics_err('3'); break; case 93: // Error - Max temp prusa_statistics_err('4'); break; case 99: // heartbeat SERIAL_ECHOPGM("{[PRN:99]"); prusa_stat_temperatures(); prusa_stat_farm_number(); break; } SERIAL_ECHOLN('}'); } static void prusa_stat_printerstatus(int _status) { SERIAL_ECHOPGM("[PRN:"); SERIAL_ECHO(_status); SERIAL_ECHO(']'); } static void prusa_stat_farm_number() { SERIAL_ECHOPGM("[PFN:0]"); } static void prusa_stat_diameter() { SERIAL_ECHOPGM("[DIA:"); SERIAL_ECHO(eeprom_read_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM)); SERIAL_ECHO(']'); } static void prusa_stat_temperatures() { SERIAL_ECHOPGM("[ST0:"); SERIAL_ECHO(target_temperature[0]); SERIAL_ECHOPGM("][STB:"); SERIAL_ECHO(target_temperature_bed); SERIAL_ECHOPGM("][AT0:"); SERIAL_ECHO(current_temperature[0]); SERIAL_ECHOPGM("][ATB:"); SERIAL_ECHO(current_temperature_bed); SERIAL_ECHO(']'); } static void prusa_stat_printinfo() { SERIAL_ECHOPGM("[TFU:"); SERIAL_ECHO(total_filament_used); SERIAL_ECHOPGM("][PCD:"); SERIAL_ECHO(itostr3(card.percentDone())); SERIAL_ECHOPGM("][FEM:"); SERIAL_ECHO(itostr3(feedmultiply)); SERIAL_ECHOPGM("][FNM:"); SERIAL_ECHO(longFilenameOLD); SERIAL_ECHOPGM("][TIM:"); if (starttime != 0) { SERIAL_ECHO(_millis() / 1000 - starttime / 1000); } else { SERIAL_ECHO(0); } SERIAL_ECHOPGM("][FWR:"); SERIAL_ECHORPGM(FW_VERSION_STR_P()); SERIAL_ECHO(']'); prusa_stat_diameter(); } /* void lcd_pick_babystep(){ int enc_dif = 0; int cursor_pos = 1; int fsm = 0; lcd_clear(); lcd_set_cursor(0, 0); lcd_puts_P(_i("Pick print"));////MSG_PICK_Z lcd_set_cursor(3, 2); lcd_print('1'); lcd_set_cursor(3, 3); lcd_print('2'); lcd_set_cursor(12, 2); lcd_print('3'); lcd_set_cursor(12, 3); lcd_print('4'); lcd_set_cursor(1, 2); lcd_print('>'); enc_dif = lcd_encoder_diff; while (fsm == 0) { manage_heater(); manage_inactivity(true); if ( abs((enc_dif - lcd_encoder_diff)) > 4 ) { if ( (abs(enc_dif - lcd_encoder_diff)) > 1 ) { if (enc_dif > lcd_encoder_diff ) { cursor_pos --; } if (enc_dif < lcd_encoder_diff ) { cursor_pos ++; } if (cursor_pos > 4) { cursor_pos = 4; } if (cursor_pos < 1) { cursor_pos = 1; } lcd_set_cursor(1, 2); lcd_print(' '); lcd_set_cursor(1, 3); lcd_print(' '); lcd_set_cursor(10, 2); lcd_print(' '); lcd_set_cursor(10, 3); lcd_print(' '); if (cursor_pos < 3) { lcd_set_cursor(1, cursor_pos+1); lcd_print('>'); }else{ lcd_set_cursor(10, cursor_pos-1); lcd_print('>'); } enc_dif = lcd_encoder_diff; _delay(100); } } if (lcd_clicked()) { fsm = cursor_pos; int babyStepZ; EEPROM_read_B(EEPROM_BABYSTEP_Z0+((fsm-1)*2),&babyStepZ); EEPROM_save_B(EEPROM_BABYSTEP_Z,&babyStepZ); calibration_status_store(CALIBRATION_STATUS_CALIBRATED); _delay(500); } }; lcd_clear(); lcd_return_to_status(); } */ void lcd_move_menu_axis() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); MENU_ITEM_SUBMENU_P(_i("Move X"), lcd_move_x);////MSG_MOVE_X MENU_ITEM_SUBMENU_P(_i("Move Y"), lcd_move_y);////MSG_MOVE_Y MENU_ITEM_SUBMENU_P(_i("Move Z"), lcd_move_z);////MSG_MOVE_Z MENU_ITEM_SUBMENU_P(_T(MSG_EXTRUDER), lcd_move_e);////MSG_EXTRUDER MENU_END(); } static void lcd_move_menu_1mm() { move_menu_scale = 1.0; lcd_move_menu_axis(); } void EEPROM_save(int pos, uint8_t* value, uint8_t size) { do { eeprom_write_byte((unsigned char*)pos, *value); pos++; value++; } while (--size); } void EEPROM_read(int pos, uint8_t* value, uint8_t size) { do { *value = eeprom_read_byte((unsigned char*)pos); pos++; value++; } while (--size); } #ifdef SDCARD_SORT_ALPHA static void lcd_sort_type_set() { uint8_t sdSort; EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort)); switch (sdSort) { case SD_SORT_TIME: sdSort = SD_SORT_ALPHA; break; case SD_SORT_ALPHA: sdSort = SD_SORT_NONE; break; default: sdSort = SD_SORT_TIME; } eeprom_update_byte((unsigned char *)EEPROM_SD_SORT, sdSort); card.presort_flag = true; } #endif //SDCARD_SORT_ALPHA #ifdef TMC2130 static void lcd_crash_mode_info() { lcd_update_enable(true); static uint32_t tim = 0; if ((tim + 1000) < _millis()) { lcd_clear(); fputs_P(_i("Crash detection can\nbe turned on only in\nNormal mode"), lcdout);////MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4 tim = _millis(); } menu_back_if_clicked(); } static void lcd_crash_mode_info2() { lcd_update_enable(true); static uint32_t tim = 0; if ((tim + 1000) < _millis()) { lcd_clear(); fputs_P(_i("WARNING:\nCrash detection\ndisabled in\nStealth mode"), lcdout);////MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4 tim = _millis(); } menu_back_if_clicked(); } #endif //TMC2130 #ifdef FILAMENT_SENSOR static void lcd_filament_autoload_info() { uint8_t nlines; lcd_update_enable(true); static uint32_t tim = 0; if ((tim + 1000) < _millis()) { lcd_display_message_fullscreen_nonBlocking_P(_i("Autoloading filament available only when filament sensor is turned on..."), nlines); ////MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4 tim = _millis(); } menu_back_if_clicked(); } static void lcd_fsensor_fail() { uint8_t nlines; lcd_update_enable(true); static uint32_t tim = 0; if ((tim + 1000) < _millis()) { lcd_display_message_fullscreen_nonBlocking_P(_i("ERROR: Filament sensor is not responding, please check connection."), nlines);////MSG_FSENS_NOT_RESPONDING c=20 r=4 tim = _millis(); } menu_back_if_clicked(); } #endif //FILAMENT_SENSOR //-// static void lcd_sound_state_set(void) { Sound_CycleState(); } #ifndef MMU_FORCE_STEALTH_MODE static void lcd_silent_mode_mmu_set() { if (SilentModeMenu_MMU == 1) SilentModeMenu_MMU = 0; else SilentModeMenu_MMU = 1; //saving to eeprom is done in mmu_loop() after mmu actually switches state and confirms with "ok" } #endif //MMU_FORCE_STEALTH_MODE static void lcd_silent_mode_set() { switch (SilentModeMenu) { #ifdef TMC2130 case SILENT_MODE_NORMAL: SilentModeMenu = SILENT_MODE_STEALTH; break; case SILENT_MODE_STEALTH: SilentModeMenu = SILENT_MODE_NORMAL; break; default: SilentModeMenu = SILENT_MODE_NORMAL; break; // (probably) not needed #else case SILENT_MODE_POWER: SilentModeMenu = SILENT_MODE_SILENT; break; case SILENT_MODE_SILENT: SilentModeMenu = SILENT_MODE_AUTO; break; case SILENT_MODE_AUTO: SilentModeMenu = SILENT_MODE_POWER; break; default: SilentModeMenu = SILENT_MODE_POWER; break; // (probably) not needed #endif //TMC2130 } eeprom_update_byte((unsigned char *)EEPROM_SILENT, SilentModeMenu); #ifdef TMC2130 lcd_display_message_fullscreen_P(_i("Mode change in progress ...")); // Wait until the planner queue is drained and the stepper routine achieves // an idle state. st_synchronize(); if (tmc2130_wait_standstill_xy(1000)) {} // MYSERIAL.print("standstill OK"); // else // MYSERIAL.print("standstill NG!"); cli(); tmc2130_mode = (SilentModeMenu != SILENT_MODE_NORMAL)?TMC2130_MODE_SILENT:TMC2130_MODE_NORMAL; update_mode_profile(); tmc2130_init(); // We may have missed a stepper timer interrupt due to the time spent in tmc2130_init. // Be safe than sorry, reset the stepper timer before re-enabling interrupts. st_reset_timer(); sei(); #endif //TMC2130 st_current_init(); #ifdef TMC2130 if (lcd_crash_detect_enabled() && (SilentModeMenu != SILENT_MODE_NORMAL)) menu_submenu(lcd_crash_mode_info2); lcd_encoder_diff=0; // reset 'encoder buffer' #endif //TMC2130 } #ifdef TMC2130 static void crash_mode_switch() { if (lcd_crash_detect_enabled()) { lcd_crash_detect_disable(); } else { lcd_crash_detect_enable(); } if (IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) menu_goto(lcd_tune_menu, 9, true, true); else menu_goto(lcd_settings_menu, 9, true, true); } #endif //TMC2130 #ifdef FILAMENT_SENSOR static void lcd_fsensor_state_set() { FSensorStateMenu = !FSensorStateMenu; //set also from fsensor_enable() and fsensor_disable() if (!FSensorStateMenu) { fsensor_disable(); if (fsensor_autoload_enabled && !mmu_enabled) menu_submenu(lcd_filament_autoload_info); } else { fsensor_enable(); if (fsensor_not_responding && !mmu_enabled) menu_submenu(lcd_fsensor_fail); } } #endif //FILAMENT_SENSOR #if !SDSORT_USES_RAM void lcd_set_degree() { lcd_set_custom_characters_degree(); } void lcd_set_progress() { lcd_set_custom_characters_progress(); } #endif #if (LANG_MODE != 0) void menu_setlang(unsigned char lang) { if (!lang_select(lang)) { if (lcd_show_fullscreen_message_yes_no_and_wait_P(_i("Copy selected language?"), false, true)) lang_boot_update_start(lang); lcd_update_enable(true); lcd_clear(); menu_goto(lcd_language_menu, 0, true, true); lcd_timeoutToStatus.stop(); //infinite timeout lcd_draw_update = 2; } } static void lcd_language_menu() { MENU_BEGIN(); if (lang_is_selected()) MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); // if (menu_item_text_P(lang_get_name_by_code(lang_get_code(0)))) //primary language { menu_setlang(0); return; } uint8_t cnt = lang_get_count(); #ifdef W25X20CL if (cnt == 2) //display secondary language in case of clear xflash { if (menu_item_text_P(lang_get_name_by_code(lang_get_code(1)))) { menu_setlang(1); return; } } else for (int i = 2; i < cnt; i++) //skip seconday language - solved in lang_select (MK3) #else //W25X20CL for (int i = 1; i < cnt; i++) //all seconday languages (MK2/25) #endif //W25X20CL if (menu_item_text_P(lang_get_name_by_code(lang_get_code(i)))) { menu_setlang(i); return; } MENU_END(); } #endif //(LANG_MODE != 0) void lcd_mesh_bedleveling() { mesh_bed_run_from_menu = true; enquecommand_P(PSTR("G80")); lcd_return_to_status(); } void lcd_mesh_calibration() { enquecommand_P(PSTR("M45")); lcd_return_to_status(); } void lcd_mesh_calibration_z() { enquecommand_P(PSTR("M45 Z")); lcd_return_to_status(); } void lcd_pinda_calibration_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MENU_CALIBRATION)); MENU_ITEM_SUBMENU_P(_i("Calibrate"), lcd_calibrate_pinda);////MSG_CALIBRATE_PINDA c=17 r=1 MENU_END(); } void lcd_temp_calibration_set() { bool temp_cal_active = eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE); temp_cal_active = !temp_cal_active; eeprom_update_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE, temp_cal_active); } #ifdef HAS_SECOND_SERIAL_PORT void lcd_second_serial_set() { if(selectedSerialPort == 1) selectedSerialPort = 0; else selectedSerialPort = 1; eeprom_update_byte((unsigned char *)EEPROM_SECOND_SERIAL_ACTIVE, selectedSerialPort); MYSERIAL.begin(BAUDRATE); } #endif //HAS_SECOND_SERIAL_PORT void lcd_calibrate_pinda() { enquecommand_P(PSTR("G76")); lcd_return_to_status(); } #ifndef SNMM /*void lcd_calibrate_extruder() { if (degHotend0() > EXTRUDE_MINTEMP) { current_position[E_AXIS] = 0; //set initial position to zero plan_set_e_position(current_position[E_AXIS]); //long steps_start = st_get_position(E_AXIS); long steps_final; float e_steps_per_unit; float feedrate = (180 / axis_steps_per_unit[E_AXIS]) * 1; //3 //initial automatic extrusion feedrate (depends on current value of axis_steps_per_unit to avoid too fast extrusion) float e_shift_calibration = (axis_steps_per_unit[E_AXIS] > 180 ) ? ((180 / axis_steps_per_unit[E_AXIS]) * 70): 70; //length of initial automatic extrusion sequence const char *msg_e_cal_knob = _i("Rotate knob until mark reaches extruder body. Click when done.");////MSG_E_CAL_KNOB c=20 r=8 const char *msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_e_cal_knob); const bool multi_screen = msg_next_e_cal_knob != NULL; unsigned long msg_millis; lcd_show_fullscreen_message_and_wait_P(_i("Mark filament 100mm from extruder body. Click when done."));////MSG_MARK_FIL c=20 r=8 lcd_clear(); lcd_set_cursor(0, 1); lcd_puts_P(_T(MSG_PLEASE_WAIT)); current_position[E_AXIS] += e_shift_calibration; plan_buffer_line_curposXYZE(feedrate, active_extruder); st_synchronize(); lcd_display_message_fullscreen_P(msg_e_cal_knob); msg_millis = _millis(); while (!LCD_CLICKED) { if (multi_screen && _millis() - msg_millis > 5000) { if (msg_next_e_cal_knob == NULL) msg_next_e_cal_knob = msg_e_cal_knob; msg_next_e_cal_knob = lcd_display_message_fullscreen_P(msg_next_e_cal_knob); msg_millis = _millis(); } //manage_inactivity(true); manage_heater(); if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) { //adjusting mark by knob rotation delay_keep_alive(50); //previous_millis_cmd = _millis(); lcd_encoder += (lcd_encoder_diff / ENCODER_PULSES_PER_STEP); lcd_encoder_diff = 0; if (!planner_queue_full()) { current_position[E_AXIS] += float(abs((int)lcd_encoder)) * 0.01; //0.05 lcd_encoder = 0; plan_buffer_line_curposXYZE(feedrate, active_extruder); } } } steps_final = current_position[E_AXIS] * axis_steps_per_unit[E_AXIS]; //steps_final = st_get_position(E_AXIS); lcd_draw_update = 1; e_steps_per_unit = ((float)(steps_final)) / 100.0f; if (e_steps_per_unit < MIN_E_STEPS_PER_UNIT) e_steps_per_unit = MIN_E_STEPS_PER_UNIT; if (e_steps_per_unit > MAX_E_STEPS_PER_UNIT) e_steps_per_unit = MAX_E_STEPS_PER_UNIT; lcd_clear(); axis_steps_per_unit[E_AXIS] = e_steps_per_unit; enquecommand_P(PSTR("M500")); //store settings to eeprom //lcd_drawedit(PSTR("Result"), ftostr31(axis_steps_per_unit[E_AXIS])); //delay_keep_alive(2000); delay_keep_alive(500); lcd_show_fullscreen_message_and_wait_P(_i("E calibration finished. Please clean the nozzle. Click when done."));////MSG_CLEAN_NOZZLE_E c=20 r=8 lcd_update_enable(true); lcd_draw_update = 2; } else { show_preheat_nozzle_warning(); } lcd_return_to_status(); } void lcd_extr_cal_reset() { float tmp1[] = DEFAULT_AXIS_STEPS_PER_UNIT; axis_steps_per_unit[E_AXIS] = tmp1[3]; //extrudemultiply = 100; enquecommand_P(PSTR("M500")); }*/ #endif void lcd_toshiba_flash_air_compatibility_toggle() { card.ToshibaFlashAir_enable(! card.ToshibaFlashAir_isEnabled()); eeprom_update_byte((uint8_t*)EEPROM_TOSHIBA_FLASH_AIR_COMPATIBLITY, card.ToshibaFlashAir_isEnabled()); } //! @brief Continue first layer calibration with previous value or start from zero? //! //! @code{.unparsed} //! |01234567890123456789| //! |Sheet Smooth1 actual| c=a, c=b, a+b = 13 //! |Z offset: -1.480 mm | c=a, c=b, a+b = 14 //! |>Continue | c=19 //! | Start from zero | c=19 //! ---------------------- //! @endcode void lcd_first_layer_calibration_reset() { typedef struct { bool reset; } MenuData; static_assert(sizeof(menu_data)>= sizeof(MenuData),"_menu_data_t doesn't fit into menu_data"); MenuData* menuData = (MenuData*)&(menu_data[0]); if(LCD_CLICKED || !eeprom_is_sheet_initialized(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet))) || (calibration_status() >= CALIBRATION_STATUS_LIVE_ADJUST) || (0 == static_cast(eeprom_read_word(reinterpret_cast (&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset))))) { if (menuData->reset) { eeprom_update_word(reinterpret_cast(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset), 0xffff); } menu_goto(lcd_v2_calibration,0,true,true); } if (lcd_encoder > 0) { menuData->reset = true; lcd_encoder = 1; } else if (lcd_encoder < 1) { menuData->reset = false; lcd_encoder = 0; } char sheet_name[sizeof(Sheet::name)]; eeprom_read_block(sheet_name, &EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].name, sizeof(Sheet::name)); lcd_set_cursor(0, 0); float offset = static_cast(eeprom_read_word(reinterpret_cast(&EEPROM_Sheets_base->s[(eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)))].z_offset)))/cs.axis_steps_per_unit[Z_AXIS]; lcd_printf_P(_i("Sheet %.7s\nZ offset: %+1.3f mm\n%cContinue\n%cStart from zero"), //// \n denotes line break, %.7s is replaced by 7 character long sheet name, %+1.3f is replaced by 6 character long floating point number, %c is replaced by > or white space (one character) based on whether first or second option is selected. % denoted place holders can not be reordered. r=4 sheet_name, offset, menuData->reset ? ' ' : '>', menuData->reset ? '>' : ' '); } void lcd_v2_calibration() { if (mmu_enabled) { const uint8_t filament = choose_menu_P( _i("Select filament:"), ////c=20 r=1 _T(MSG_FILAMENT),_i("Cancel")); ////c=19 r=1 if (filament < 5) { lay1cal_filament = filament; } else { menu_back(); return; } } else if (!eeprom_read_byte((uint8_t*)EEPROM_WIZARD_ACTIVE)) { bool loaded = false; if (fsensor_enabled && ir_sensor_detected) { loaded = (digitalRead(IR_SENSOR_PIN) == 0); } else { loaded = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_LOADED), false, true); lcd_update_enabled = true; } if (!loaded) { lcd_display_message_fullscreen_P(_i("Please load filament first."));////MSG_PLEASE_LOAD_PLA c=20 r=4 lcd_consume_click(); for (uint_least8_t i = 0; i < 20; i++) { //wait max. 2s delay_keep_alive(100); if (lcd_clicked()) { break; } } lcd_update_enabled = true; menu_back(); return; } } eFilamentAction = FilamentAction::Lay1Cal; menu_goto(lcd_generic_preheat_menu, 0, true, true); } void lcd_wizard() { bool result = true; if (calibration_status() != CALIBRATION_STATUS_ASSEMBLED) { result = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Running Wizard will delete current calibration results and start from the beginning. Continue?"), false, false);////MSG_WIZARD_RERUN c=20 r=7 } if (result) { calibration_status_store(CALIBRATION_STATUS_ASSEMBLED); lcd_wizard(WizState::Run); } else { lcd_return_to_status(); lcd_update_enable(true); lcd_update(2); } } #if (LANG_MODE != 0) void lcd_language() { lcd_update_enable(true); lcd_clear(); menu_goto(lcd_language_menu, 0, true, true); lcd_timeoutToStatus.stop(); //infinite timeout lcd_draw_update = 2; while ((menu_menu != lcd_status_screen) && (!lang_is_selected())) { _delay(50); lcd_update(0); manage_heater(); manage_inactivity(true); } if (lang_is_selected()) lcd_return_to_status(); else lang_select(LANG_ID_PRI); } #endif static void wait_preheat() { current_position[Z_AXIS] = 100; //move in z axis to make space for loading filament plan_buffer_line_curposXYZE(homing_feedrate[Z_AXIS] / 60); delay_keep_alive(2000); lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING)); lcd_set_custom_characters(); while (abs(degHotend(0) - degTargetHotend(0)) > 3) { lcd_display_message_fullscreen_P(_T(MSG_WIZARD_HEATING)); lcd_set_cursor(0, 4); //Print the hotend temperature (9 chars total) lcdui_print_temp(LCD_STR_THERMOMETER[0], degHotend(0), (int)(degTargetHotend(0) + 0.5)); delay_keep_alive(1000); } } static void lcd_wizard_load() { if (mmu_enabled) { lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the first tube of the MMU, then press the knob to load it."));////c=20 r=8 tmp_extruder = 0; } else { lcd_show_fullscreen_message_and_wait_P(_i("Please insert filament into the extruder, then press the knob to load it."));////MSG_WIZARD_LOAD_FILAMENT c=20 r=8 } lcd_update_enable(false); lcd_clear(); lcd_puts_at_P(0, 2, _T(MSG_LOADING_FILAMENT)); #ifdef SNMM change_extr(0); #endif loading_flag = true; gcode_M701(); } bool lcd_autoDepleteEnabled() { return (lcd_autoDeplete && fsensor_enabled); } static void wizard_lay1cal_message(bool cold) { lcd_show_fullscreen_message_and_wait_P( _i("Now I will calibrate distance between tip of the nozzle and heatbed surface.")); ////MSG_WIZARD_V2_CAL c=20 r=8 if (mmu_enabled) { lcd_show_fullscreen_message_and_wait_P( _i("Choose a filament for the First Layer Calibration and select it in the on-screen menu.")); } else if (cold) { lcd_show_fullscreen_message_and_wait_P( _i("Select temperature which matches your material.")); } lcd_show_fullscreen_message_and_wait_P( _i("The printer will start printing a zig-zag line. Rotate the knob until you reach the optimal height. Check the pictures in the handbook (Calibration chapter).")); ////MSG_WIZARD_V2_CAL_2 c=20 r=12 } //! @brief Printer first run wizard (Selftest and calibration) //! //! //! First layer calibration with MMU state diagram //! //! @startuml //! [*] --> IsFil //! IsFil : Is any filament loaded? //! LoadFilCold : Push the button to start loading Filament 1 //! //! IsFil --> Lay1CalCold : yes //! IsFil --> LoadFilCold : no //! LoadFilCold --> Lay1CalCold : click //! @enduml //! //! First layer calibration without MMU state diagram //! //! @startuml //! [*] --> IsFil //! IsFil : Is filament loaded? //! Preheat : Select nozle temperature which matches your material. //! LoadFilHot : Insert filament to extruder and press the knob. //! //! IsFil --> Lay1CalCold : yes //! IsFil --> Preheat : no //! Preheat --> LoadFilHot : select //! LoadFilHot --> Lay1CalHot : click //! @enduml //! //! @param state Entry point of the wizard //! //! state | description //! ---------------------- | ---------------- //! WizState::Run | Main entry point //! WizState::RepeatLay1Cal | Entry point after passing 1st layer calibration //! WizState::LoadFilHot | Entry point after temporarily left for preheat before load filament void lcd_wizard(WizState state) { using S = WizState; bool end = false; int wizard_event; const char *msg = NULL; // Make sure EEPROM_WIZARD_ACTIVE is true if entering using different entry point // other than WizState::Run - it is useful for debugging wizard. if (state != S::Run) eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); FORCE_BL_ON_START; while (!end) { printf_P(PSTR("Wizard state: %d\n"), state); switch (state) { case S::Run: //Run wizard? // 2019-08-07 brutal hack - solving the "viper" situation. // It is caused by the fact, that tmc2130_st_isr makes a crash detection before the printers really starts. // And thus it calles stop_and_save_print_to_ram which sets the saved_printing flag. // Having this flag set during normal printing is lethal - mesh_plan_buffer_line exist in the middle of planning long travels // which results in distorted print. // This primarily happens when the printer is new and parked in 0,0 // So any new printer will fail the first layer calibration unless being reset or the Stop function gets called. // We really must find a way to prevent the crash from happening before the printer is started - that would be the correct solution. // Btw. the flag may even trigger the viper situation on normal start this way and the user won't be able to find out why. saved_printing = false; wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Hi, I am your Original Prusa i3 printer. Would you like me to guide you through the setup process?"), false, true);////MSG_WIZARD_WELCOME c=20 r=7 if (wizard_event) { state = S::Restore; eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 1); } else { eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); end = true; } break; case S::Restore: switch (calibration_status()) { case CALIBRATION_STATUS_ASSEMBLED: state = S::Selftest; break; //run selftest case CALIBRATION_STATUS_XYZ_CALIBRATION: state = S::Xyz; break; //run xyz cal. case CALIBRATION_STATUS_Z_CALIBRATION: state = S::Z; break; //run z cal. case CALIBRATION_STATUS_LIVE_ADJUST: state = S::IsFil; break; //run live adjust case CALIBRATION_STATUS_CALIBRATED: end = true; eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); break; default: state = S::Selftest; break; //if calibration status is unknown, run wizard from the beginning } break; case S::Selftest: lcd_show_fullscreen_message_and_wait_P(_i("First, I will run the selftest to check most common assembly problems."));////MSG_WIZARD_SELFTEST c=20 r=8 wizard_event = lcd_selftest(); if (wizard_event) { calibration_status_store(CALIBRATION_STATUS_XYZ_CALIBRATION); state = S::Xyz; } else end = true; break; case S::Xyz: lcd_show_fullscreen_message_and_wait_P(_i("I will run xyz calibration now. It will take approx. 12 mins."));////MSG_WIZARD_XYZ_CAL c=20 r=8 wizard_event = gcode_M45(false, 0); if (wizard_event) state = S::IsFil; else end = true; break; case S::Z: lcd_show_fullscreen_message_and_wait_P(_i("Please remove shipping helpers first.")); lcd_show_fullscreen_message_and_wait_P(_i("Now remove the test print from steel sheet.")); lcd_show_fullscreen_message_and_wait_P(_i("I will run z calibration now."));////MSG_WIZARD_Z_CAL c=20 r=8 wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_STEEL_SHEET_CHECK), false, false); if (!wizard_event) lcd_show_fullscreen_message_and_wait_P(_T(MSG_PLACE_STEEL_SHEET)); wizard_event = gcode_M45(true, 0); if (wizard_event) { //current filament needs to be unloaded and then new filament should be loaded //start to preheat nozzle for unloading remaining PLA filament setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0); lcd_display_message_fullscreen_P(_i("Now I will preheat nozzle for PLA.")); wait_preheat(); //unload current filament unload_filament(); //load filament lcd_wizard_load(); setTargetHotend(0, 0); //we are finished, cooldown nozzle state = S::Finish; //shipped, no need to set first layer, go to final message directly } else end = true; break; case S::IsFil: //start to preheat nozzle and bed to save some time later setTargetHotend(PLA_PREHEAT_HOTEND_TEMP, 0); setTargetBed(PLA_PREHEAT_HPB_TEMP); if (mmu_enabled) { wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_LOADED), true); } else { wizard_event = lcd_show_fullscreen_message_yes_no_and_wait_P(_T(MSG_FILAMENT_LOADED), true); } if (wizard_event) state = S::Lay1CalCold; else { if(mmu_enabled) state = S::LoadFilCold; else state = S::Preheat; } break; case S::Preheat: menu_goto(lcd_preheat_menu,0,false,true); lcd_show_fullscreen_message_and_wait_P(_i("Select nozzle preheat temperature which matches your material.")); end = true; // Leave wizard temporarily for lcd_preheat_menu break; case S::LoadFilHot: wait_preheat(); lcd_wizard_load(); state = S::Lay1CalHot; break; case S::LoadFilCold: lcd_wizard_load(); state = S::Lay1CalCold; break; case S::Lay1CalCold: wizard_lay1cal_message(true); menu_goto(lcd_v2_calibration,0,false,true); end = true; // Leave wizard temporarily for lcd_v2_calibration break; case S::Lay1CalHot: wizard_lay1cal_message(false); lcd_commands_type = LcdCommands::Layer1Cal; end = true; // Leave wizard temporarily for lcd_v2_calibration break; case S::RepeatLay1Cal: wizard_event = lcd_show_multiscreen_message_yes_no_and_wait_P(_i("Do you want to repeat last step to readjust distance between nozzle and heatbed?"), false);////MSG_WIZARD_REPEAT_V2_CAL c=20 r=7 if (wizard_event) { lcd_show_fullscreen_message_and_wait_P(_i("Please clean heatbed and then press the knob."));////MSG_WIZARD_CLEAN_HEATBED c=20 r=8 state = S::Lay1CalCold; } else { lcd_show_fullscreen_message_and_wait_P(_i("If you have additional steel sheets, calibrate their presets in Settings - HW Setup - Steel sheets.")); state = S::Finish; } break; case S::Finish: eeprom_update_byte((uint8_t*)EEPROM_WIZARD_ACTIVE, 0); end = true; break; default: break; } } FORCE_BL_ON_END; printf_P(_N("Wizard end state: %d\n"), state); switch (state) { //final message case S::Restore: //printer was already calibrated msg = _T(MSG_WIZARD_DONE); break; case S::Selftest: //selftest case S::Xyz: //xyz cal. case S::Z: //z cal. msg = _T(MSG_WIZARD_CALIBRATION_FAILED); break; case S::Finish: //we are finished msg = _T(MSG_WIZARD_DONE); lcd_reset_alert_level(); lcd_setstatuspgm(_T(WELCOME_MSG)); lcd_return_to_status(); break; default: msg = _T(MSG_WIZARD_QUIT); break; } if (!((S::Lay1CalCold == state) || (S::Lay1CalHot == state) || (S::Preheat == state))) { lcd_show_fullscreen_message_and_wait_P(msg); } lcd_update_enable(true); lcd_update(2); } #ifdef TMC2130 void lcd_settings_linearity_correction_menu(void) { MENU_BEGIN(); ON_MENU_LEAVE( lcd_settings_linearity_correction_menu_save(); ); MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); #ifdef TMC2130_LINEARITY_CORRECTION_XYZ //tmc2130_wave_fac[X_AXIS] MENU_ITEM_EDIT_int3_P(_i("X-correct:"), &tmc2130_wave_fac[X_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_X_CORRECTION c=13 MENU_ITEM_EDIT_int3_P(_i("Y-correct:"), &tmc2130_wave_fac[Y_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Y_CORRECTION c=13 MENU_ITEM_EDIT_int3_P(_i("Z-correct:"), &tmc2130_wave_fac[Z_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_Z_CORRECTION c=13 #endif //TMC2130_LINEARITY_CORRECTION_XYZ MENU_ITEM_EDIT_int3_P(_i("E-correct:"), &tmc2130_wave_fac[E_AXIS], TMC2130_WAVE_FAC1000_MIN-TMC2130_WAVE_FAC1000_STP, TMC2130_WAVE_FAC1000_MAX);////MSG_EXTRUDER_CORRECTION c=13 MENU_END(); } #endif // TMC2130 #ifdef FILAMENT_SENSOR #define SETTINGS_FILAMENT_SENSOR \ do\ {\ if (FSensorStateMenu == 0)\ {\ if (fsensor_not_responding && (mmu_enabled == false))\ {\ /* Filament sensor not working*/\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set);/*////MSG_FSENSOR_NA*/\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_fsensor_fail);\ }\ else\ {\ /* Filament sensor turned off, working, no problems*/\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set);\ if (mmu_enabled == false)\ {\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), NULL, lcd_filament_autoload_info);\ }\ }\ }\ else\ {\ /* Filament sensor turned on, working, no problems*/\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set);\ if (mmu_enabled == false)\ {\ if (fsensor_autoload_enabled)\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_ON), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_ON c=17 r=1*/\ else\ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR_AUTOLOAD), _T(MSG_OFF), lcd_set_filament_autoload);/*////MSG_FSENS_AUTOLOAD_OFF c=17 r=1*/\ /*if (fsensor_oq_meassure_enabled)*/\ /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass. [on]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_ON c=17 r=1*/\ /*else*/\ /*MENU_ITEM_FUNCTION_P(_i("F. OQ meass.[off]"), lcd_set_filament_oq_meass);*//*////MSG_FSENS_OQMEASS_OFF c=17 r=1*/\ }\ }\ }\ while(0) #else //FILAMENT_SENSOR #define SETTINGS_FILAMENT_SENSOR do{}while(0) #endif //FILAMENT_SENSOR static void auto_deplete_switch() { lcd_autoDeplete = !lcd_autoDeplete; eeprom_update_byte((unsigned char *)EEPROM_AUTO_DEPLETE, lcd_autoDeplete); } static void settingsAutoDeplete() { if (mmu_enabled) { if (!fsensor_enabled) { MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_NA), NULL); } else if (lcd_autoDeplete) { MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_ON), auto_deplete_switch); } else { MENU_ITEM_TOGGLE_P(_T(MSG_AUTO_DEPLETE), _T(MSG_OFF), auto_deplete_switch); } } } #define SETTINGS_AUTO_DEPLETE \ do\ {\ settingsAutoDeplete();\ }\ while(0)\ #ifdef MMU_HAS_CUTTER static void settingsCutter() { if (mmu_enabled) { if (EEPROM_MMU_CUTTER_ENABLED_enabled == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED)) { MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_ON), lcd_cutter_enabled); } #ifdef MMU_ALWAYS_CUT else if (EEPROM_MMU_CUTTER_ENABLED_always == eeprom_read_byte((uint8_t*)EEPROM_MMU_CUTTER_ENABLED)) { MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _i("Always"), lcd_cutter_enabled); } #endif else { MENU_ITEM_TOGGLE_P(_T(MSG_CUTTER), _T(MSG_OFF), lcd_cutter_enabled); } } } #define SETTINGS_CUTTER \ do\ {\ settingsCutter();\ }\ while(0) #else #define SETTINGS_CUTTER #endif //MMU_HAS_CUTTER #ifdef TMC2130 #define SETTINGS_SILENT_MODE \ do\ {\ if(!farm_mode)\ {\ if (SilentModeMenu == SILENT_MODE_NORMAL)\ {\ MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set);\ }\ else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set);\ if (SilentModeMenu == SILENT_MODE_NORMAL)\ {\ if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch);\ else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch);\ }\ else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info);\ }\ }\ while (0) #else //TMC2130 #define SETTINGS_SILENT_MODE \ do\ {\ if(!farm_mode)\ {\ switch (SilentModeMenu)\ {\ case SILENT_MODE_POWER:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\ break;\ case SILENT_MODE_SILENT:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set);\ break;\ case SILENT_MODE_AUTO:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set);\ break;\ default:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set);\ break; /* (probably) not needed*/\ }\ }\ }\ while (0) #endif //TMC2130 #ifndef MMU_FORCE_STEALTH_MODE #define SETTINGS_MMU_MODE \ do\ {\ if (mmu_enabled)\ {\ if (SilentModeMenu_MMU == 0) MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_NORMAL), lcd_silent_mode_mmu_set);\ else MENU_ITEM_TOGGLE_P(_T(MSG_MMU_MODE), _T(MSG_STEALTH), lcd_silent_mode_mmu_set);\ }\ }\ while (0) #else //MMU_FORCE_STEALTH_MODE #define SETTINGS_MMU_MODE #endif //MMU_FORCE_STEALTH_MODE #ifdef SDCARD_SORT_ALPHA #define SETTINGS_SD \ do\ {\ if (card.ToshibaFlashAir_isEnabled())\ MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\ else\ MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\ \ uint8_t sdSort;\ EEPROM_read(EEPROM_SD_SORT, (uint8_t*)&sdSort, sizeof(sdSort));\ switch (sdSort)\ {\ case SD_SORT_TIME: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_TIME), lcd_sort_type_set); break;\ case SD_SORT_ALPHA: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_SORT_ALPHA), lcd_sort_type_set); break;\ default: MENU_ITEM_TOGGLE_P(_T(MSG_SORT), _T(MSG_NONE), lcd_sort_type_set);\ }\ }\ while (0) #else // SDCARD_SORT_ALPHA #define SETTINGS_SD \ do\ {\ if (card.ToshibaFlashAir_isEnabled())\ MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY), lcd_toshiba_flash_air_compatibility_toggle);\ else\ MENU_ITEM_TOGGLE_P(_T(MSG_SD_CARD), _T(MSG_NORMAL), lcd_toshiba_flash_air_compatibility_toggle);\ }\ while (0) #endif // SDCARD_SORT_ALPHA /* #define SETTINGS_MBL_MODE \ do\ {\ switch(e_mbl_type)\ {\ case e_MBL_FAST:\ MENU_ITEM_FUNCTION_P(_i("Mode [Fast]"),mbl_mode_set);\ break; \ case e_MBL_OPTIMAL:\ MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \ break; \ case e_MBL_PREC:\ MENU_ITEM_FUNCTION_P(_i("Mode [Precise]"), mbl_mode_set); \ break; \ default:\ MENU_ITEM_FUNCTION_P(_i("Mode [Optimal]"), mbl_mode_set); \ break; \ }\ }\ while (0) */ #define SETTINGS_SOUND \ do\ {\ switch(eSoundMode)\ {\ case e_SOUND_MODE_LOUD:\ MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\ break;\ case e_SOUND_MODE_ONCE:\ MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_ONCE), lcd_sound_state_set);\ break;\ case e_SOUND_MODE_SILENT:\ MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SILENT), lcd_sound_state_set);\ break;\ case e_SOUND_MODE_BLIND:\ MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_BLIND), lcd_sound_state_set);\ break;\ default:\ MENU_ITEM_TOGGLE_P(_T(MSG_SOUND), _T(MSG_SOUND_LOUD), lcd_sound_state_set);\ }\ }\ while (0) //-// static void lcd_check_mode_set(void) { switch(oCheckMode) { case ClCheckMode::_None: oCheckMode=ClCheckMode::_Warn; break; case ClCheckMode::_Warn: oCheckMode=ClCheckMode::_Strict; break; case ClCheckMode::_Strict: oCheckMode=ClCheckMode::_None; break; default: oCheckMode=ClCheckMode::_None; } eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODE,(uint8_t)oCheckMode); } #define SETTINGS_MODE \ do\ {\ switch(oCheckMode)\ {\ case ClCheckMode::_None:\ MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\ break;\ case ClCheckMode::_Warn:\ MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_WARN), lcd_check_mode_set);\ break;\ case ClCheckMode::_Strict:\ MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_STRICT), lcd_check_mode_set);\ break;\ default:\ MENU_ITEM_TOGGLE_P(_T(MSG_NOZZLE), _T(MSG_NONE), lcd_check_mode_set);\ }\ }\ while (0) static void lcd_nozzle_diameter_cycle(void) { uint16_t nDiameter; switch(oNozzleDiameter){ case ClNozzleDiameter::_Diameter_250: oNozzleDiameter=ClNozzleDiameter::_Diameter_400; nDiameter=400; break; case ClNozzleDiameter::_Diameter_400: oNozzleDiameter=ClNozzleDiameter::_Diameter_600; nDiameter=600; break; case ClNozzleDiameter::_Diameter_600: oNozzleDiameter=ClNozzleDiameter::_Diameter_800; nDiameter=800; break; case ClNozzleDiameter::_Diameter_800: oNozzleDiameter=ClNozzleDiameter::_Diameter_250; nDiameter=250; break; default: oNozzleDiameter=ClNozzleDiameter::_Diameter_400; nDiameter=400; } eeprom_update_byte((uint8_t*)EEPROM_NOZZLE_DIAMETER,(uint8_t)oNozzleDiameter); eeprom_update_word((uint16_t*)EEPROM_NOZZLE_DIAMETER_uM,nDiameter); } #define SETTINGS_NOZZLE \ do\ {\ float fNozzleDiam;\ switch(oNozzleDiameter)\ {\ case ClNozzleDiameter::_Diameter_250: fNozzleDiam = 0.25f; break;\ case ClNozzleDiameter::_Diameter_400: fNozzleDiam = 0.4f; break;\ case ClNozzleDiameter::_Diameter_600: fNozzleDiam = 0.6f; break;\ case ClNozzleDiameter::_Diameter_800: fNozzleDiam = 0.8f; break;\ default: fNozzleDiam = 0.4f; break;\ }\ MENU_ITEM_TOGGLE(_T(MSG_NOZZLE_DIAMETER), ftostr12ns(fNozzleDiam), lcd_nozzle_diameter_cycle);\ }\ while (0) static void lcd_check_model_set(void) { switch(oCheckModel) { case ClCheckModel::_None: oCheckModel=ClCheckModel::_Warn; break; case ClCheckModel::_Warn: oCheckModel=ClCheckModel::_Strict; break; case ClCheckModel::_Strict: oCheckModel=ClCheckModel::_None; break; default: oCheckModel=ClCheckModel::_None; } eeprom_update_byte((uint8_t*)EEPROM_CHECK_MODEL,(uint8_t)oCheckModel); } #define SETTINGS_MODEL \ do\ {\ switch(oCheckModel)\ {\ case ClCheckModel::_None:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\ break;\ case ClCheckModel::_Warn:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_WARN), lcd_check_model_set);\ break;\ case ClCheckModel::_Strict:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_STRICT), lcd_check_model_set);\ break;\ default:\ MENU_ITEM_TOGGLE_P(_T(MSG_MODEL), _T(MSG_NONE), lcd_check_model_set);\ }\ }\ while (0) static void lcd_check_version_set(void) { switch(oCheckVersion) { case ClCheckVersion::_None: oCheckVersion=ClCheckVersion::_Warn; break; case ClCheckVersion::_Warn: oCheckVersion=ClCheckVersion::_Strict; break; case ClCheckVersion::_Strict: oCheckVersion=ClCheckVersion::_None; break; default: oCheckVersion=ClCheckVersion::_None; } eeprom_update_byte((uint8_t*)EEPROM_CHECK_VERSION,(uint8_t)oCheckVersion); } #define SETTINGS_VERSION \ do\ {\ switch(oCheckVersion)\ {\ case ClCheckVersion::_None:\ MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\ break;\ case ClCheckVersion::_Warn:\ MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_WARN), lcd_check_version_set);\ break;\ case ClCheckVersion::_Strict:\ MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_STRICT), lcd_check_version_set);\ break;\ default:\ MENU_ITEM_TOGGLE_P(_T(MSG_FIRMWARE), _T(MSG_NONE), lcd_check_version_set);\ }\ }\ while (0) #if 0 // temporarily unused static void lcd_check_gcode_set(void) { switch(oCheckGcode) { case ClCheckGcode::_None: oCheckGcode=ClCheckGcode::_Warn; break; case ClCheckGcode::_Warn: oCheckGcode=ClCheckGcode::_Strict; break; case ClCheckGcode::_Strict: oCheckGcode=ClCheckGcode::_None; break; default: oCheckGcode=ClCheckGcode::_None; } eeprom_update_byte((uint8_t*)EEPROM_CHECK_GCODE,(uint8_t)oCheckGcode); } #endif #define SETTINGS_GCODE \ do\ {\ switch(oCheckGcode)\ {\ case ClCheckGcode::_None:\ MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\ break;\ case ClCheckGcode::_Warn:\ MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_WARN), lcd_check_gcode_set);\ break;\ case ClCheckGcode::_Strict:\ MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_STRICT), lcd_check_gcode_set);\ break;\ default:\ MENU_ITEM_TOGGLE_P(_T(MSG_GCODE), _T(MSG_NONE), lcd_check_gcode_set);\ }\ }\ while (0) static void lcd_checking_menu(void) { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_HW_SETUP)); SETTINGS_MODE; SETTINGS_MODEL; SETTINGS_VERSION; //-// temporarily disabled //SETTINGS_GCODE; MENU_END(); } #ifdef IR_SENSOR_ANALOG static void lcd_fsensor_actionNA_set(void) { switch(oFsensorActionNA) { case ClFsensorActionNA::_Continue: oFsensorActionNA=ClFsensorActionNA::_Pause; break; case ClFsensorActionNA::_Pause: oFsensorActionNA=ClFsensorActionNA::_Continue; break; default: oFsensorActionNA=ClFsensorActionNA::_Continue; } eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_ACTION_NA,(uint8_t)oFsensorActionNA); } #define FSENSOR_ACTION_NA \ do\ {\ switch(oFsensorActionNA)\ {\ case ClFsensorActionNA::_Continue:\ MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_CONTINUE), lcd_fsensor_actionNA_set);\ break;\ case ClFsensorActionNA::_Pause:\ MENU_ITEM_TOGGLE_P(_T(MSG_FS_ACTION), _T(MSG_FS_PAUSE), lcd_fsensor_actionNA_set);\ break;\ default:\ oFsensorActionNA=ClFsensorActionNA::_Continue;\ }\ }\ while (0) #endif //IR_SENSOR_ANALOG template static void select_sheet_menu() { selected_sheet = number; lcd_sheet_menu(); } static void sheets_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_HW_SETUP)); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[0], select_sheet_menu<0>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[1], select_sheet_menu<1>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[2], select_sheet_menu<2>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[3], select_sheet_menu<3>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[4], select_sheet_menu<4>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[5], select_sheet_menu<5>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[6], select_sheet_menu<6>); MENU_ITEM_SUBMENU_E(EEPROM_Sheets_base->s[7], select_sheet_menu<7>); MENU_END(); } void lcd_hw_setup_menu(void) // can not be "static" { typedef struct {// 2bytes total int8_t status; uint8_t experimental_menu_visibility; } _menu_data_t; static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data"); _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]); if (_md->status == 0 || lcd_draw_update) { _md->status = 1; _md->experimental_menu_visibility = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY); if (_md->experimental_menu_visibility == EEPROM_EMPTY_VALUE) { _md->experimental_menu_visibility = 0; eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, _md->experimental_menu_visibility); } } MENU_BEGIN(); MENU_ITEM_BACK_P(_T(bSettings?MSG_SETTINGS:MSG_BACK)); // i.e. default menu-item / menu-item after checking mismatch MENU_ITEM_SUBMENU_P(_T(MSG_STEEL_SHEETS), sheets_menu); SETTINGS_NOZZLE; MENU_ITEM_SUBMENU_P(_i("Checks"), lcd_checking_menu); #ifdef IR_SENSOR_ANALOG FSENSOR_ACTION_NA; //! Fsensor Detection isn't ready for mmu yet it is temporarily disabled. //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu if(!mmu_enabled) MENU_ITEM_FUNCTION_P(PSTR("Fsensor Detection"), lcd_detect_IRsensor); #endif //IR_SENSOR_ANALOG if (_md->experimental_menu_visibility) { MENU_ITEM_SUBMENU_P(PSTR("Experimental"), lcd_experimental_menu);////MSG_MENU_EXPERIMENTAL c=18 } #ifdef PINDA_TEMP_COMP //! The SuperPINDA is detected when the PINDA temp is below its defined limit. //! This works well on the EINSY board but not on the miniRAMBo board as //! as a disconnected SuperPINDA will show higher temps compared to an EINSY board. //! //! This menu allows the user to en-/disable the SuperPINDA manualy MENU_ITEM_TOGGLE_P(_N("SuperPINDA"), eeprom_read_byte((uint8_t *)EEPROM_PINDA_TEMP_COMPENSATION) ? _T(MSG_YES) : _T(MSG_NO), lcd_pinda_temp_compensation_toggle); #endif //PINDA_TEMP_COMP MENU_END(); } static void lcd_settings_menu() { EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu)); MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_SUBMENU_P(_i("Temperature"), lcd_control_temperature_menu);////MSG_TEMPERATURE if (!homing_flag) MENU_ITEM_SUBMENU_P(_i("Move axis"), lcd_move_menu_1mm);////MSG_MOVE_AXIS if (!isPrintPaused) MENU_ITEM_GCODE_P(_i("Disable steppers"), PSTR("M84"));////MSG_DISABLE_STEPPERS SETTINGS_FILAMENT_SENSOR; SETTINGS_AUTO_DEPLETE; SETTINGS_CUTTER; MENU_ITEM_TOGGLE_P(_T(MSG_FANS_CHECK), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check); SETTINGS_SILENT_MODE; if(!farm_mode) { bSettings=true; // flag ('fake parameter') for 'lcd_hw_setup_menu()' function MENU_ITEM_SUBMENU_P(_T(MSG_HW_SETUP), lcd_hw_setup_menu); } SETTINGS_MMU_MODE; MENU_ITEM_SUBMENU_P(_T(MSG_MESH_BED_LEVELING), lcd_mesh_bed_leveling_settings); #if defined (TMC2130) && defined (LINEARITY_CORRECTION) MENU_ITEM_SUBMENU_P(_i("Lin. correction"), lcd_settings_linearity_correction_menu); #endif //LINEARITY_CORRECTION && TMC2130 if(has_temperature_compensation()) { MENU_ITEM_TOGGLE_P(_T(MSG_TEMP_CALIBRATION), eeprom_read_byte((unsigned char *)EEPROM_TEMP_CAL_ACTIVE) ? _T(MSG_ON) : _T(MSG_OFF), lcd_temp_calibration_set); } #ifdef HAS_SECOND_SERIAL_PORT MENU_ITEM_TOGGLE_P(_T(MSG_RPI_PORT), (selectedSerialPort == 0) ? _T(MSG_OFF) : _T(MSG_ON), lcd_second_serial_set); #endif //HAS_SECOND_SERIAL if (!isPrintPaused && !homing_flag) MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z); #if (LANG_MODE != 0) MENU_ITEM_SUBMENU_P(_i("Select language"), lcd_language_menu);////MSG_LANGUAGE_SELECT #endif //(LANG_MODE != 0) SETTINGS_SD; SETTINGS_SOUND; #ifdef LCD_BL_PIN if (backlightSupport) { MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu); } #endif //LCD_BL_PIN if (farm_mode) { MENU_ITEM_FUNCTION_P(PSTR("Disable farm mode"), lcd_disable_farm_mode); } MENU_END(); } #ifdef TMC2130 static void lcd_ustep_linearity_menu_save() { eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC, tmc2130_wave_fac[X_AXIS]); eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC, tmc2130_wave_fac[Y_AXIS]); eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC, tmc2130_wave_fac[Z_AXIS]); eeprom_update_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC, tmc2130_wave_fac[E_AXIS]); } #endif //TMC2130 #ifdef TMC2130 static void lcd_settings_linearity_correction_menu_save() { bool changed = false; if (tmc2130_wave_fac[X_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[X_AXIS] = 0; if (tmc2130_wave_fac[Y_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Y_AXIS] = 0; if (tmc2130_wave_fac[Z_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[Z_AXIS] = 0; if (tmc2130_wave_fac[E_AXIS] < TMC2130_WAVE_FAC1000_MIN) tmc2130_wave_fac[E_AXIS] = 0; changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_X_FAC) != tmc2130_wave_fac[X_AXIS]); changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Y_FAC) != tmc2130_wave_fac[Y_AXIS]); changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_Z_FAC) != tmc2130_wave_fac[Z_AXIS]); changed |= (eeprom_read_byte((uint8_t*)EEPROM_TMC2130_WAVE_E_FAC) != tmc2130_wave_fac[E_AXIS]); lcd_ustep_linearity_menu_save(); if (changed) tmc2130_init(); } #endif //TMC2130 static void lcd_calibration_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); if (!isPrintPaused) { MENU_ITEM_FUNCTION_P(_i("Wizard"), lcd_wizard);////MSG_WIZARD c=17 r=1 if (lcd_commands_type == LcdCommands::Idle) { MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), lcd_first_layer_calibration_reset);////MSG_V2_CALIBRATION c=18 } MENU_ITEM_GCODE_P(_T(MSG_AUTO_HOME), PSTR("G28 W")); #ifdef TMC2130 MENU_ITEM_FUNCTION_P(_i("Belt test "), lcd_belttest_v);////MSG_BELTTEST c=17 #endif //TMC2130 MENU_ITEM_FUNCTION_P(_i("Selftest "), lcd_selftest_v);////MSG_SELFTEST c=17 #ifdef MK1BP // MK1 // "Calibrate Z" MENU_ITEM_GCODE_P(_T(MSG_HOMEYZ), PSTR("G28 Z")); #else //MK1BP // MK2 MENU_ITEM_FUNCTION_P(_i("Calibrate XYZ"), lcd_mesh_calibration);////MSG_CALIBRATE_BED // "Calibrate Z" with storing the reference values to EEPROM. MENU_ITEM_SUBMENU_P(_T(MSG_HOMEYZ), lcd_mesh_calibration_z); #ifndef SNMM //MENU_ITEM_FUNCTION_P(_i("Calibrate E"), lcd_calibrate_extruder);////MSG_CALIBRATE_E c=20 r=1 #endif // "Mesh Bed Leveling" MENU_ITEM_SUBMENU_P(_T(MSG_MESH_BED_LEVELING), lcd_mesh_bedleveling); #endif //MK1BP MENU_ITEM_SUBMENU_P(_i("Bed level correct"), lcd_adjust_bed);////MSG_BED_CORRECTION_MENU MENU_ITEM_SUBMENU_P(_i("PID calibration"), pid_extruder);////MSG_PID_EXTRUDER c=17 r=1 #ifndef TMC2130 MENU_ITEM_SUBMENU_P(_i("Show end stops"), menu_show_end_stops);////MSG_SHOW_END_STOPS c=18 #endif #ifndef MK1BP MENU_ITEM_GCODE_P(_i("Reset XYZ calibr."), PSTR("M44"));////MSG_CALIBRATE_BED_RESET #endif //MK1BP #ifndef SNMM //MENU_ITEM_FUNCTION_P(MSG_RESET_CALIBRATE_E, lcd_extr_cal_reset); #endif #ifndef MK1BP if(has_temperature_compensation()) { MENU_ITEM_SUBMENU_P(_i("Temp. calibration"), lcd_pinda_calibration_menu);////MSG_CALIBRATION_PINDA_MENU c=17 r=1 } #endif //MK1BP } MENU_END(); } void bowden_menu() { int enc_dif = lcd_encoder_diff; int cursor_pos = 0; lcd_clear(); lcd_putc_at(0, 0, '>'); for (uint_least8_t i = 0; i < 4; i++) { lcd_puts_at_P(1, i, PSTR("Extruder ")); lcd_print(i); lcd_print(": "); EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]); lcd_print(bowden_length[i] - 48); } enc_dif = lcd_encoder_diff; lcd_consume_click(); while (1) { manage_heater(); manage_inactivity(true); if (abs((enc_dif - lcd_encoder_diff)) > 2) { if (enc_dif > lcd_encoder_diff) { cursor_pos--; } if (enc_dif < lcd_encoder_diff) { cursor_pos++; } if (cursor_pos > 3) { cursor_pos = 3; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } if (cursor_pos < 0) { cursor_pos = 0; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } lcd_puts_at_P(0, 0, PSTR(" \n \n \n ")); lcd_putc_at(0, cursor_pos, '>'); Sound_MakeSound(e_SOUND_TYPE_EncoderMove); enc_dif = lcd_encoder_diff; _delay(100); } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); lcd_clear(); while (1) { manage_heater(); manage_inactivity(true); lcd_puts_at_P(1, 1, PSTR("Extruder ")); lcd_print(cursor_pos); lcd_print(": "); lcd_set_cursor(13, 1); lcd_print(bowden_length[cursor_pos] - 48); if (abs((enc_dif - lcd_encoder_diff)) > 2) { if (enc_dif > lcd_encoder_diff) { bowden_length[cursor_pos]--; lcd_set_cursor(13, 1); lcd_print(bowden_length[cursor_pos] - 48); enc_dif = lcd_encoder_diff; } if (enc_dif < lcd_encoder_diff) { bowden_length[cursor_pos]++; lcd_set_cursor(13, 1); lcd_print(bowden_length[cursor_pos] - 48); enc_dif = lcd_encoder_diff; } } _delay(100); if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); EEPROM_save_B(EEPROM_BOWDEN_LENGTH + cursor_pos * 2, &bowden_length[cursor_pos]); if (lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Continue with another bowden?"))) { lcd_update_enable(true); lcd_clear(); enc_dif = lcd_encoder_diff; lcd_putc_at(0, cursor_pos, '>'); for (uint_least8_t i = 0; i < 4; i++) { lcd_puts_at_P(1, i, PSTR("Extruder ")); lcd_print(i); lcd_print(": "); EEPROM_read_B(EEPROM_BOWDEN_LENGTH + i * 2, &bowden_length[i]); lcd_print(bowden_length[i] - 48); } break; } else return; } } } } } #ifdef SNMM static char snmm_stop_print_menu() { //menu for choosing which filaments will be unloaded in stop print lcd_clear(); lcd_puts_at_P(0,0,_T(MSG_UNLOAD_FILAMENT)); lcd_print(':'); lcd_set_cursor(0, 1); lcd_print('>'); lcd_puts_at_P(1,2,_i("Used during print"));////MSG_USED c=19 r=1 lcd_puts_at_P(1,3,_i("Current"));////MSG_CURRENT c=19 r=1 char cursor_pos = 1; int enc_dif = 0; KEEPALIVE_STATE(PAUSED_FOR_USER); lcd_consume_click(); while (1) { manage_heater(); manage_inactivity(true); if (abs((enc_dif - lcd_encoder_diff)) > 4) { if ((abs(enc_dif - lcd_encoder_diff)) > 1) { if (enc_dif > lcd_encoder_diff) cursor_pos--; if (enc_dif < lcd_encoder_diff) cursor_pos++; if (cursor_pos > 3) { cursor_pos = 3; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } if (cursor_pos < 1){ cursor_pos = 1; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } lcd_puts_at_P(0, 1, PSTR(" \n \n ")); lcd_set_cursor(0, cursor_pos); lcd_print('>'); enc_dif = lcd_encoder_diff; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); _delay(100); } } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); KEEPALIVE_STATE(IN_HANDLER); return(cursor_pos - 1); } } } #endif //SNMM //! @brief Select one of numbered items //! //! Create list of items with header. Header can not be selected. //! Each item has text description passed by function parameter and //! number. There are 5 numbered items, if mmu_enabled, 4 otherwise. //! Items are numbered from 1 to 4 or 5. But index returned starts at 0. //! There can be last item with different text and no number. //! //! @param header Header text //! @param item Item text //! @param last_item Last item text, or nullptr if there is no Last item //! @return selected item index, first item index is 0 uint8_t choose_menu_P(const char *header, const char *item, const char *last_item) { //following code should handle 3 to 127 number of items well const int8_t items_no = last_item?(mmu_enabled?6:5):(mmu_enabled?5:4); const uint8_t item_len = item?strlen_P(item):0; int8_t first = 0; int8_t enc_dif = lcd_encoder_diff; int8_t cursor_pos = 1; lcd_clear(); KEEPALIVE_STATE(PAUSED_FOR_USER); while (1) { manage_heater(); manage_inactivity(true); if (abs((enc_dif - lcd_encoder_diff)) > 4) { if (enc_dif > lcd_encoder_diff) { cursor_pos--; } if (enc_dif < lcd_encoder_diff) { cursor_pos++; } enc_dif = lcd_encoder_diff; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); } if (cursor_pos > 3) { cursor_pos = 3; if (first < items_no - 3) { first++; lcd_clear(); } else { // here we are at the very end of the list Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } } if (cursor_pos < 1) { cursor_pos = 1; if (first > 0) { first--; lcd_clear(); } else { // here we are at the very end of the list Sound_MakeSound(e_SOUND_TYPE_BlindAlert); } } if (header) lcd_puts_at_P(0,0,header); const bool last_visible = (first == items_no - 3); const uint_least8_t ordinary_items = (last_item&&last_visible)?2:3; for (uint_least8_t i = 0; i < ordinary_items; i++) { if (item) lcd_puts_at_P(1, i + 1, item); } for (uint_least8_t i = 0; i < ordinary_items; i++) { lcd_set_cursor(2 + item_len, i+1); lcd_print(first + i + 1); } if (last_item&&last_visible) lcd_puts_at_P(1, 3, last_item); lcd_puts_at_P(0, 1, PSTR(" \n \n ")); lcd_putc_at(0, cursor_pos, '>'); _delay(100); if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); KEEPALIVE_STATE(IN_HANDLER); lcd_encoder_diff = 0; return(cursor_pos + first - 1); } } } char reset_menu() { const uint8_t items_no = #ifdef SNMM 5; #else 4; #endif static int8_t first = 0; int8_t enc_dif = 0; char cursor_pos = 0; const char *const item[items_no] PROGMEM = {PSTR("Language"), PSTR("Statistics"), PSTR("Shipping prep"), PSTR("All Data") #ifdef SNMM , PSTR("Bowden length") #endif }; enc_dif = lcd_encoder_diff; lcd_clear(); lcd_set_cursor(0, 0); lcd_putc('>'); lcd_consume_click(); while (1) { for (uint_least8_t i = 0; i < 4; i++) { lcd_puts_at_P(1, i, item[first + i]); } manage_heater(); manage_inactivity(true); if (abs((enc_dif - lcd_encoder_diff)) > 4) { if ((abs(enc_dif - lcd_encoder_diff)) > 1) { if (enc_dif > lcd_encoder_diff) { cursor_pos--; } if (enc_dif < lcd_encoder_diff) { cursor_pos++; } if (cursor_pos > 3) { cursor_pos = 3; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); if (first < items_no - 4) { first++; lcd_clear(); } } if (cursor_pos < 0) { cursor_pos = 0; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); if (first > 0) { first--; lcd_clear(); } } lcd_puts_at_P(0, 0, PSTR(" \n \n \n ")); lcd_set_cursor(0, cursor_pos); lcd_putc('>'); Sound_MakeSound(e_SOUND_TYPE_EncoderMove); enc_dif = lcd_encoder_diff; _delay(100); } } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); return(cursor_pos + first); } } } static void lcd_disable_farm_mode() { int8_t disable = lcd_show_fullscreen_message_yes_no_and_wait_P(PSTR("Disable farm mode?"), true, false); //allow timeouting, default no if (disable) { enquecommand_P(PSTR("G99")); lcd_return_to_status(); } lcd_update_enable(true); lcd_draw_update = 2; } static void fil_load_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_FUNCTION_P(_i("Load all"), load_all); ////MSG_LOAD_ALL c=17 MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', extr_adj, 0); ////MSG_LOAD_FILAMENT_1 c=16 MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', extr_adj, 1); ////MSG_LOAD_FILAMENT_2 c=17 MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', extr_adj, 2); ////MSG_LOAD_FILAMENT_3 c=17 MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', extr_adj, 3); ////MSG_LOAD_FILAMENT_4 c=17 if (mmu_enabled) { MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', extr_adj, 4); } MENU_END(); } static void mmu_load_to_nozzle_menu() { if (bFilamentAction) { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '1', lcd_mmu_load_to_nozzle, 0); MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '2', lcd_mmu_load_to_nozzle, 1); MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '3', lcd_mmu_load_to_nozzle, 2); MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '4', lcd_mmu_load_to_nozzle, 3); MENU_ITEM_FUNCTION_NR_P(_T(MSG_LOAD_FILAMENT), '5', lcd_mmu_load_to_nozzle, 4); MENU_END(); } else { eFilamentAction = FilamentAction::MmuLoad; preheat_or_continue(); } } static void mmu_eject_filament(uint8_t filament) { menu_back(); mmu_eject_filament(filament, true); } static void mmu_fil_eject_menu() { if (bFilamentAction) { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '1', mmu_eject_filament, 0); MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '2', mmu_eject_filament, 1); MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '3', mmu_eject_filament, 2); MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '4', mmu_eject_filament, 3); MENU_ITEM_FUNCTION_NR_P(_T(MSG_EJECT_FILAMENT), '5', mmu_eject_filament, 4); MENU_END(); } else { eFilamentAction = FilamentAction::MmuEject; preheat_or_continue(); } } #ifdef MMU_HAS_CUTTER static void mmu_cut_filament_menu() { if(bFilamentAction) { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '1', mmu_cut_filament, 0); MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '2', mmu_cut_filament, 1); MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '3', mmu_cut_filament, 2); MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '4', mmu_cut_filament, 3); MENU_ITEM_FUNCTION_NR_P(_T(MSG_CUT_FILAMENT), '5', mmu_cut_filament, 4); MENU_END(); } else { eFilamentAction=FilamentAction::MmuCut; bFilamentFirstRun=false; if(target_temperature[0]>=EXTRUDE_MINTEMP) { bFilamentPreheatState=true; mFilamentItem(target_temperature[0],target_temperature_bed); } else lcd_generic_preheat_menu(); } } #endif //MMU_HAS_CUTTER #ifdef SNMM static void fil_unload_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_FUNCTION_P(_i("Unload all"), extr_unload_all);////MSG_UNLOAD_ALL c=17 MENU_ITEM_FUNCTION_P(_i("Unload filament 1"), extr_unload_0);////MSG_UNLOAD_FILAMENT_1 c=17 MENU_ITEM_FUNCTION_P(_i("Unload filament 2"), extr_unload_1);////MSG_UNLOAD_FILAMENT_2 c=17 MENU_ITEM_FUNCTION_P(_i("Unload filament 3"), extr_unload_2);////MSG_UNLOAD_FILAMENT_3 c=17 MENU_ITEM_FUNCTION_P(_i("Unload filament 4"), extr_unload_3);////MSG_UNLOAD_FILAMENT_4 c=17 if (mmu_enabled) MENU_ITEM_FUNCTION_P(_i("Unload filament 5"), extr_unload_4);////MSG_UNLOAD_FILAMENT_5 c=17 MENU_END(); } static void change_extr_menu(){ MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); MENU_ITEM_FUNCTION_P(_i("Extruder 1"), extr_change_0);////MSG_EXTRUDER_1 c=17 r=1 MENU_ITEM_FUNCTION_P(_i("Extruder 2"), extr_change_1);////MSG_EXTRUDER_2 c=17 r=1 MENU_ITEM_FUNCTION_P(_i("Extruder 3"), extr_change_2);////MSG_EXTRUDER_3 c=17 r=1 MENU_ITEM_FUNCTION_P(_i("Extruder 4"), extr_change_3);////MSG_EXTRUDER_4 c=17 r=1 MENU_END(); } #endif //SNMM //unload filament for single material printer (used in M702 gcode) void unload_filament() { custom_message_type = CustomMsg::FilamentLoading; lcd_setstatuspgm(_T(MSG_UNLOADING_FILAMENT)); raise_z_above(MIN_Z_FOR_UNLOAD); // extr_unload2(); current_position[E_AXIS] -= 45; plan_buffer_line_curposXYZE(5200 / 60); st_synchronize(); current_position[E_AXIS] -= 15; plan_buffer_line_curposXYZE(1000 / 60); st_synchronize(); current_position[E_AXIS] -= 20; plan_buffer_line_curposXYZE(1000 / 60); st_synchronize(); lcd_display_message_fullscreen_P(_T(MSG_PULL_OUT_FILAMENT)); //disable extruder steppers so filament can be removed disable_e0(); disable_e1(); disable_e2(); _delay(100); Sound_MakeSound(e_SOUND_TYPE_StandardPrompt); uint8_t counterBeep = 0; while (!lcd_clicked() && (counterBeep < 50)) { delay_keep_alive(100); counterBeep++; } st_synchronize(); while (lcd_clicked()) delay_keep_alive(100); lcd_update_enable(true); lcd_setstatuspgm(_T(WELCOME_MSG)); custom_message_type = CustomMsg::Status; } unsigned char lcd_choose_color() { //function returns index of currently chosen item //following part can be modified from 2 to 255 items: //----------------------------------------------------- unsigned char items_no = 2; const char *item[items_no]; item[0] = "Orange"; item[1] = "Black"; //----------------------------------------------------- uint_least8_t active_rows; static int first = 0; int enc_dif = 0; unsigned char cursor_pos = 1; enc_dif = lcd_encoder_diff; lcd_clear(); lcd_putc_at(0, 1, '>'); active_rows = items_no < 3 ? items_no : 3; lcd_consume_click(); while (1) { lcd_puts_at_P(0, 0, PSTR("Choose color:")); for (uint_least8_t i = 0; i < active_rows; i++) { lcd_set_cursor(1, i+1); lcd_print(item[first + i]); } manage_heater(); manage_inactivity(true); proc_commands(); if (abs((enc_dif - lcd_encoder_diff)) > 12) { if (enc_dif > lcd_encoder_diff) { cursor_pos--; } if (enc_dif < lcd_encoder_diff) { cursor_pos++; } if (cursor_pos > active_rows) { cursor_pos = active_rows; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); if (first < items_no - active_rows) { first++; lcd_clear(); } } if (cursor_pos < 1) { cursor_pos = 1; Sound_MakeSound(e_SOUND_TYPE_BlindAlert); if (first > 0) { first--; lcd_clear(); } } lcd_putc_at(0, 1, ' '); lcd_putc_at(0, 2, ' '); lcd_putc_at(0, 3, ' '); lcd_putc_at(0, cursor_pos, '>'); Sound_MakeSound(e_SOUND_TYPE_EncoderMove); enc_dif = lcd_encoder_diff; _delay(100); } if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); switch(cursor_pos + first - 1) { case 0: return 1; break; case 1: return 0; break; default: return 99; break; } } } } #include "w25x20cl.h" #ifdef LCD_TEST static void lcd_test_menu() { W25X20CL_SPI_ENTER(); w25x20cl_enable_wr(); w25x20cl_chip_erase(); w25x20cl_disable_wr(); } #endif //LCD_TEST static bool fan_error_selftest() { #ifdef FANCHECK if (!fans_check_enabled) return 0; fanSpeed = 255; #ifdef FAN_SOFT_PWM fanSpeedSoftPwm = 255; #endif //FAN_SOFT_PWM manage_heater(); //enables print fan setExtruderAutoFanState(3); //force enables the extruder fan #ifdef FAN_SOFT_PWM extruder_autofan_last_check = _millis(); fan_measuring = true; #endif //FAN_SOFT_PWM _delay(1000); //delay_keep_alive would turn off extruder fan, because temerature is too low (maybe) manage_heater(); fanSpeed = 0; setExtruderAutoFanState(1); //releases lock on the extruder fan #ifdef FAN_SOFT_PWM fanSpeedSoftPwm = 0; #endif //FAN_SOFT_PWM manage_heater(); #ifdef TACH_0 if (fan_speed[0] <= 20) { //extruder fan error LCD_ALERTMESSAGERPGM(MSG_FANCHECK_EXTRUDER); return 1; } #endif #ifdef TACH_1 if (fan_speed[1] <= 20) { //print fan error LCD_ALERTMESSAGERPGM(MSG_FANCHECK_PRINT); return 1; } #endif #endif //FANCHECK return 0; } //! @brief Resume paused print //! @todo It is not good to call restore_print_from_ram_and_continue() from function called by lcd_update(), //! as restore_print_from_ram_and_continue() calls lcd_update() internally. void lcd_resume_print() { lcd_return_to_status(); lcd_reset_alert_level(); //for fan speed error if (fan_error_selftest()) return; //abort if error persists cmdqueue_serial_disabled = false; lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS)); st_synchronize(); lcd_setstatuspgm(_T(MSG_RESUMING_PRINT)); ////MSG_RESUMING_PRINT c=20 isPrintPaused = false; restore_print_from_ram_and_continue(default_retraction); pause_time += (_millis() - start_pause_print); //accumulate time when print is paused for correct statistics calculation refresh_cmd_timeout(); SERIAL_PROTOCOLLNRPGM(MSG_OCTOPRINT_RESUMED); //resume octoprint } static void change_sheet() { eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet); menu_back(3); } static void lcd_rename_sheet_menu() { struct MenuData { bool initialized; uint8_t selected; char name[sizeof(Sheet::name)]; }; static_assert(sizeof(menu_data)>= sizeof(MenuData),"MenuData doesn't fit into menu_data"); MenuData* menuData = (MenuData*)&(menu_data[0]); if (!menuData->initialized) { eeprom_read_block(menuData->name, EEPROM_Sheets_base->s[selected_sheet].name, sizeof(Sheet::name)); lcd_encoder = menuData->name[0]; menuData->initialized = true; } if (lcd_encoder < '\x20') lcd_encoder = '\x20'; if (lcd_encoder > '\x7F') lcd_encoder = '\x7F'; menuData->name[menuData->selected] = lcd_encoder; lcd_set_cursor(0,0); for (uint_least8_t i = 0; i < sizeof(Sheet::name); ++i) { lcd_putc(menuData->name[i]); } lcd_set_cursor(menuData->selected, 1); lcd_putc('^'); if (lcd_clicked()) { if ((menuData->selected + 1u) < sizeof(Sheet::name)) { lcd_encoder = menuData->name[++(menuData->selected)]; } else { eeprom_update_block(menuData->name, EEPROM_Sheets_base->s[selected_sheet].name, sizeof(Sheet::name)); menu_back(); } } } static void lcd_reset_sheet() { SheetName sheetName; eeprom_default_sheet_name(selected_sheet, sheetName); eeprom_update_word(reinterpret_cast(&(EEPROM_Sheets_base->s[selected_sheet].z_offset)),EEPROM_EMPTY_VALUE16); eeprom_update_block(sheetName.c,EEPROM_Sheets_base->s[selected_sheet].name,sizeof(Sheet::name)); if (selected_sheet == eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet))) { eeprom_switch_to_next_sheet(); if((-1 == eeprom_next_initialized_sheet(0)) && (CALIBRATION_STATUS_CALIBRATED == calibration_status())) { calibration_status_store(CALIBRATION_STATUS_LIVE_ADJUST); } } menu_back(); } //! @brief Activate selected_sheet and run first layer calibration static void activate_calibrate_sheet() { eeprom_update_byte(&(EEPROM_Sheets_base->active_sheet), selected_sheet); lcd_first_layer_calibration_reset(); } static void lcd_sheet_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_STEEL_SHEETS)); if(eeprom_is_sheet_initialized(selected_sheet)){ MENU_ITEM_SUBMENU_P(_i("Select"), change_sheet); //// c=18 } if (lcd_commands_type == LcdCommands::Idle) { MENU_ITEM_SUBMENU_P(_T(MSG_V2_CALIBRATION), activate_calibrate_sheet);////MSG_V2_CALIBRATION c=18 } MENU_ITEM_SUBMENU_P(_i("Rename"), lcd_rename_sheet_menu); //// c=18 MENU_ITEM_FUNCTION_P(_T(MSG_RESET), lcd_reset_sheet); ////MSG_RESET c=14 MENU_END(); } static void lcd_main_menu() { MENU_BEGIN(); // Majkl superawesome menu MENU_ITEM_BACK_P(_T(MSG_WATCH)); #ifdef RESUME_DEBUG if (!saved_printing) MENU_ITEM_FUNCTION_P(PSTR("tst - Save"), lcd_menu_test_save); else MENU_ITEM_FUNCTION_P(PSTR("tst - Restore"), lcd_menu_test_restore); #endif //RESUME_DEBUG #ifdef TMC2130_DEBUG MENU_ITEM_FUNCTION_P(PSTR("recover print"), recover_print); MENU_ITEM_FUNCTION_P(PSTR("power panic"), uvlo_); #endif //TMC2130_DEBUG if ( ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) && (current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU) && !homing_flag && !mesh_bed_leveling_flag) { MENU_ITEM_SUBMENU_P(_T(MSG_BABYSTEP_Z), lcd_babystep_z);//8 } if (farm_mode) MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8 if ( moves_planned() || IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal)) { MENU_ITEM_SUBMENU_P(_i("Tune"), lcd_tune_menu);////MSG_TUNE } else { MENU_ITEM_SUBMENU_P(_i("Preheat"), lcd_preheat_menu);////MSG_PREHEAT } if(isPrintPaused && saved_printing_type == PRINTING_TYPE_USB) { #ifdef FANCHECK if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK)) MENU_ITEM_SUBMENU_P(_T(MSG_RESUME_PRINT), lcd_resume_print);////MSG_RESUME_PRINT c=18 #else MENU_ITEM_SUBMENU_P(_T(MSG_RESUME_PRINT), lcd_resume_print);////MSG_RESUME_PRINT c=18 #endif } #ifdef SDSUPPORT if (card.cardOK || lcd_commands_type == LcdCommands::Layer1Cal) { if (card.isFileOpen()) { if (mesh_bed_leveling_flag == false && homing_flag == false) { if (card.sdprinting) { MENU_ITEM_FUNCTION_P(_i("Pause print"), lcd_pause_print);////MSG_PAUSE_PRINT } else if(isPrintPaused) { #ifdef FANCHECK if((fan_check_error == EFCE_FIXED) || (fan_check_error == EFCE_OK)) MENU_ITEM_SUBMENU_P(_T(MSG_RESUME_PRINT), lcd_resume_print);////MSG_RESUME_PRINT c=18 #else MENU_ITEM_SUBMENU_P(_T(MSG_RESUME_PRINT), lcd_resume_print);////MSG_RESUME_PRINT c=18 #endif } MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop); } } else if (lcd_commands_type == LcdCommands::Layer1Cal && mesh_bed_leveling_flag == false && homing_flag == false) { //MENU_ITEM_SUBMENU_P(_T(MSG_STOP_PRINT), lcd_sdcard_stop); } else { if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) { //if (farm_mode) MENU_ITEM_SUBMENU_P(MSG_FARM_CARD_MENU, lcd_farm_sdcard_menu); /*else*/ { bMain=true; // flag ('fake parameter') for 'lcd_sdcard_menu()' function MENU_ITEM_SUBMENU_P(_T(MSG_CARD_MENU), lcd_sdcard_menu); } } #if SDCARDDETECT < 1 MENU_ITEM_GCODE_P(_i("Change SD card"), PSTR("M21")); // SD-card changed by user////MSG_CNG_SDCARD #endif } } else { bMain=true; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function MENU_ITEM_SUBMENU_P(_i("No SD card"), lcd_sdcard_menu);////MSG_NO_CARD #if SDCARDDETECT < 1 MENU_ITEM_GCODE_P(_i("Init. SD card"), PSTR("M21")); // Manually initialize the SD-card via user interface////MSG_INIT_SDCARD #endif } #endif if(!isPrintPaused && !IS_SD_PRINTING && !is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) { if (!farm_mode) { const int8_t sheet = eeprom_read_byte(&(EEPROM_Sheets_base->active_sheet)); const int8_t nextSheet = eeprom_next_initialized_sheet(sheet); if ((nextSheet >= 0) && (sheet != nextSheet)) // show menu only if we have 2 or more sheets initialized { MENU_ITEM_FUNCTION_E(EEPROM_Sheets_base->s[sheet], eeprom_switch_to_next_sheet); } } } if ( ! ( IS_SD_PRINTING || is_usb_printing || (lcd_commands_type == LcdCommands::Layer1Cal) ) ) { if (mmu_enabled) { MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), fil_load_menu); MENU_ITEM_SUBMENU_P(_i("Load to nozzle"), mmu_load_to_nozzle_menu); //-// MENU_ITEM_FUNCTION_P(_T(MSG_UNLOAD_FILAMENT), extr_unload); //bFilamentFirstRun=true; MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), mmu_unload_filament); MENU_ITEM_SUBMENU_P(_T(MSG_EJECT_FILAMENT), mmu_fil_eject_menu); #ifdef MMU_HAS_CUTTER MENU_ITEM_SUBMENU_P(_T(MSG_CUT_FILAMENT), mmu_cut_filament_menu); #endif //MMU_HAS_CUTTER } else { #ifdef SNMM MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), fil_unload_menu); MENU_ITEM_SUBMENU_P(_i("Change extruder"), change_extr_menu);////MSG_CHANGE_EXTR c=20 r=1 #endif #ifdef FILAMENT_SENSOR if ((fsensor_autoload_enabled == true) && (fsensor_enabled == true) && (mmu_enabled == false)) MENU_ITEM_SUBMENU_P(_i("AutoLoad filament"), lcd_menu_AutoLoadFilament);////MSG_AUTOLOAD_FILAMENT c=18 else #endif //FILAMENT_SENSOR { bFilamentFirstRun=true; MENU_ITEM_SUBMENU_P(_T(MSG_LOAD_FILAMENT), lcd_LoadFilament); } bFilamentFirstRun=true; MENU_ITEM_SUBMENU_P(_T(MSG_UNLOAD_FILAMENT), lcd_unLoadFilament); } MENU_ITEM_SUBMENU_P(_T(MSG_SETTINGS), lcd_settings_menu); if(!isPrintPaused) MENU_ITEM_SUBMENU_P(_T(MSG_MENU_CALIBRATION), lcd_calibration_menu); } if (!is_usb_printing && (lcd_commands_type != LcdCommands::Layer1Cal)) { MENU_ITEM_SUBMENU_P(_i("Statistics "), lcd_menu_statistics);////MSG_STATISTICS } #if defined(TMC2130) || defined(FILAMENT_SENSOR) MENU_ITEM_SUBMENU_P(_i("Fail stats"), lcd_menu_fails_stats); #endif if (mmu_enabled) { MENU_ITEM_SUBMENU_P(_i("Fail stats MMU"), lcd_menu_fails_stats_mmu); } MENU_ITEM_SUBMENU_P(_i("Support"), lcd_support_menu);////MSG_SUPPORT #ifdef LCD_TEST MENU_ITEM_SUBMENU_P(_i("W25x20CL init"), lcd_test_menu);////MSG_SUPPORT #endif //LCD_TEST MENU_END(); } void stack_error() { Sound_MakeCustom(1000,0,true); lcd_display_message_fullscreen_P(_i("Error - static memory has been overwritten"));////MSG_STACK_ERROR c=20 r=4 //err_triggered = 1; while (1) delay_keep_alive(1000); } #ifdef DEBUG_STEPPER_TIMER_MISSED bool stepper_timer_overflow_state = false; uint16_t stepper_timer_overflow_max = 0; uint16_t stepper_timer_overflow_last = 0; uint16_t stepper_timer_overflow_cnt = 0; void stepper_timer_overflow() { char msg[28]; sprintf_P(msg, PSTR("#%d %d max %d"), ++ stepper_timer_overflow_cnt, stepper_timer_overflow_last >> 1, stepper_timer_overflow_max >> 1); lcd_setstatus(msg); stepper_timer_overflow_state = false; if (stepper_timer_overflow_last > stepper_timer_overflow_max) stepper_timer_overflow_max = stepper_timer_overflow_last; SERIAL_ECHOPGM("Stepper timer overflow: "); MYSERIAL.print(msg); SERIAL_ECHOLNPGM(""); WRITE(BEEPER, LOW); } #endif /* DEBUG_STEPPER_TIMER_MISSED */ static void lcd_colorprint_change() { enquecommand_P(PSTR("M600")); custom_message_type = CustomMsg::FilamentLoading; //just print status message lcd_setstatuspgm(_T(MSG_FINISHING_MOVEMENTS)); lcd_return_to_status(); lcd_draw_update = 3; } #ifdef LA_LIVE_K // @wavexx: looks like there's no generic float editing function in menu.cpp so we // redefine our custom handling functions to mimick other tunables const char menu_fmt_float13off[] PROGMEM = "%c%-13.13S%6.6S"; static void lcd_advance_draw_K(char chr, float val) { if (val <= 0) lcd_printf_P(menu_fmt_float13off, chr, MSG_ADVANCE_K, _T(MSG_OFF)); else lcd_printf_P(menu_fmt_float13, chr, MSG_ADVANCE_K, val); } static void lcd_advance_edit_K(void) { if (lcd_draw_update) { if (lcd_encoder < 0) lcd_encoder = 0; if (lcd_encoder > 999) lcd_encoder = 999; lcd_set_cursor(0, 1); lcd_advance_draw_K(' ', 0.01 * lcd_encoder); } if (LCD_CLICKED) { extruder_advance_K = 0.01 * lcd_encoder; menu_back_no_reset(); } } static uint8_t lcd_advance_K() { if (menu_item == menu_line) { if (lcd_draw_update) { lcd_set_cursor(0, menu_row); lcd_advance_draw_K((lcd_encoder == menu_item)?'>':' ', extruder_advance_K); } if (menu_clicked && (lcd_encoder == menu_item)) { menu_submenu_no_reset(lcd_advance_edit_K); lcd_encoder = 100. * extruder_advance_K; return menu_item_ret(); } } menu_item++; return 0; } #define MENU_ITEM_EDIT_advance_K() do { if (lcd_advance_K()) return; } while (0) #endif static void lcd_tune_menu() { typedef struct { menu_data_edit_t reserved; //!< reserved for number editing functions int8_t status; //!< To recognize, whether the menu has been just initialized. //! Backup of extrudemultiply, to recognize, that the value has been changed and //! it needs to be applied. int16_t extrudemultiply; } _menu_data_t; static_assert(sizeof(menu_data)>= sizeof(_menu_data_t),"_menu_data_t doesn't fit into menu_data"); _menu_data_t* _md = (_menu_data_t*)&(menu_data[0]); if (_md->status == 0) { // Menu was entered. Mark the menu as entered and save the current extrudemultiply value. _md->status = 1; _md->extrudemultiply = extrudemultiply; } else if (_md->extrudemultiply != extrudemultiply) { // extrudemultiply has been changed from the child menu. Apply the new value. _md->extrudemultiply = extrudemultiply; calculate_extruder_multipliers(); } EEPROM_read(EEPROM_SILENT, (uint8_t*)&SilentModeMenu, sizeof(SilentModeMenu)); MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_MAIN)); //1 MENU_ITEM_EDIT_int3_P(_i("Speed"), &feedmultiply, 10, 999);//2////MSG_SPEED MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10);//3 MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 10);//4 MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255);//5 MENU_ITEM_EDIT_int3_P(_i("Flow"), &extrudemultiply, 10, 999);//6////MSG_FLOW #ifdef LA_LIVE_K MENU_ITEM_EDIT_advance_K();//7 #endif #ifdef FILAMENTCHANGEENABLE if (!farm_mode) MENU_ITEM_FUNCTION_P(_T(MSG_FILAMENTCHANGE), lcd_colorprint_change);//8 #endif #ifdef FILAMENT_SENSOR if (FSensorStateMenu == 0) { if (fsensor_not_responding && (mmu_enabled == false)) { /* Filament sensor not working*/ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_NA), lcd_fsensor_state_set); } else { /* Filament sensor turned off, working, no problems*/ MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_OFF), lcd_fsensor_state_set); } } else { MENU_ITEM_TOGGLE_P(_T(MSG_FSENSOR), _T(MSG_ON), lcd_fsensor_state_set); } #ifdef IR_SENSOR_ANALOG FSENSOR_ACTION_NA; #endif //IR_SENSOR_ANALOG #endif //FILAMENT_SENSOR SETTINGS_AUTO_DEPLETE; SETTINGS_CUTTER; if(farm_mode) { MENU_ITEM_TOGGLE_P(_T(MSG_FANS_CHECK), fans_check_enabled ? _T(MSG_ON) : _T(MSG_OFF), lcd_set_fan_check); } #ifdef TMC2130 if(!farm_mode) { if (SilentModeMenu == SILENT_MODE_NORMAL) MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_NORMAL), lcd_silent_mode_set); else MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_STEALTH), lcd_silent_mode_set); if (SilentModeMenu == SILENT_MODE_NORMAL) { if (lcd_crash_detect_enabled()) MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_ON), crash_mode_switch); else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), _T(MSG_OFF), crash_mode_switch); } else MENU_ITEM_TOGGLE_P(_T(MSG_CRASHDETECT), NULL, lcd_crash_mode_info); } #else //TMC2130 if (!farm_mode) { //dont show in menu if we are in farm mode switch (SilentModeMenu) { case SILENT_MODE_POWER: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break; case SILENT_MODE_SILENT: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_SILENT), lcd_silent_mode_set); break; case SILENT_MODE_AUTO: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_AUTO_POWER), lcd_silent_mode_set); break; default: MENU_ITEM_TOGGLE_P(_T(MSG_MODE), _T(MSG_HIGH_POWER), lcd_silent_mode_set); break; // (probably) not needed } } #endif //TMC2130 SETTINGS_MMU_MODE; SETTINGS_SOUND; #ifdef LCD_BL_PIN if (backlightSupport) { MENU_ITEM_SUBMENU_P(_T(MSG_BRIGHTNESS), lcd_backlight_menu); } #endif //LCD_BL_PIN MENU_END(); } static void mbl_magnets_elimination_toggle() { bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0); magnet_elimination = !magnet_elimination; eeprom_update_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION, (uint8_t)magnet_elimination); } static void mbl_mesh_toggle() { uint8_t mesh_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR); if(mesh_nr == 3) mesh_nr = 7; else mesh_nr = 3; eeprom_update_byte((uint8_t*)EEPROM_MBL_POINTS_NR, mesh_nr); } static void mbl_probe_nr_toggle() { mbl_z_probe_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_PROBE_NR); switch (mbl_z_probe_nr) { case 1: mbl_z_probe_nr = 3; break; case 3: mbl_z_probe_nr = 5; break; case 5: mbl_z_probe_nr = 1; break; default: mbl_z_probe_nr = 3; break; } eeprom_update_byte((uint8_t*)EEPROM_MBL_PROBE_NR, mbl_z_probe_nr); } static void lcd_mesh_bed_leveling_settings() { bool magnet_elimination = (eeprom_read_byte((uint8_t*)EEPROM_MBL_MAGNET_ELIMINATION) > 0); uint8_t points_nr = eeprom_read_byte((uint8_t*)EEPROM_MBL_POINTS_NR); char sToggle[4]; //enough for nxn format MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); sToggle[0] = points_nr + '0'; sToggle[1] = 'x'; sToggle[2] = points_nr + '0'; sToggle[3] = 0; MENU_ITEM_TOGGLE(_T(MSG_MESH), sToggle, mbl_mesh_toggle); sToggle[0] = mbl_z_probe_nr + '0'; sToggle[1] = 0; MENU_ITEM_TOGGLE(_T(MSG_Z_PROBE_NR), sToggle, mbl_probe_nr_toggle); MENU_ITEM_TOGGLE_P(_T(MSG_MAGNETS_COMP), (points_nr == 7) ? (magnet_elimination ? _T(MSG_ON): _T(MSG_OFF)) : _T(MSG_NA), mbl_magnets_elimination_toggle); MENU_END(); //SETTINGS_MBL_MODE; } #ifdef LCD_BL_PIN static void backlight_mode_toggle() { switch (backlightMode) { case BACKLIGHT_MODE_BRIGHT: backlightMode = BACKLIGHT_MODE_DIM; break; case BACKLIGHT_MODE_DIM: backlightMode = BACKLIGHT_MODE_AUTO; break; case BACKLIGHT_MODE_AUTO: backlightMode = BACKLIGHT_MODE_BRIGHT; break; default: backlightMode = BACKLIGHT_MODE_BRIGHT; break; } backlight_save(); } static void lcd_backlight_menu() { MENU_BEGIN(); ON_MENU_LEAVE( backlight_save(); ); MENU_ITEM_BACK_P(_T(MSG_BACK)); MENU_ITEM_EDIT_int3_P(_T(MSG_BL_HIGH), &backlightLevel_HIGH, backlightLevel_LOW, 255); MENU_ITEM_EDIT_int3_P(_T(MSG_BL_LOW), &backlightLevel_LOW, 0, backlightLevel_HIGH); MENU_ITEM_TOGGLE_P(_T(MSG_MODE), ((backlightMode==BACKLIGHT_MODE_BRIGHT) ? _T(MSG_BRIGHT) : ((backlightMode==BACKLIGHT_MODE_DIM) ? _T(MSG_DIM) : _T(MSG_AUTO))), backlight_mode_toggle); MENU_ITEM_EDIT_int3_P(_T(MSG_TIMEOUT), &backlightTimer_period, 1, 999); MENU_END(); } #endif //LCD_BL_PIN static void lcd_control_temperature_menu() { #ifdef PIDTEMP // set up temp variables - undo the default scaling // raw_Ki = unscalePID_i(Ki); // raw_Kd = unscalePID_d(Kd); #endif MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_SETTINGS)); #if TEMP_SENSOR_0 != 0 MENU_ITEM_EDIT_int3_P(_T(MSG_NOZZLE), &target_temperature[0], 0, HEATER_0_MAXTEMP - 10); #endif #if TEMP_SENSOR_1 != 0 MENU_ITEM_EDIT_int3_P(_i("Nozzle2"), &target_temperature[1], 0, HEATER_1_MAXTEMP - 10);////MSG_NOZZLE1 #endif #if TEMP_SENSOR_2 != 0 MENU_ITEM_EDIT_int3_P(_i("Nozzle3"), &target_temperature[2], 0, HEATER_2_MAXTEMP - 10);////MSG_NOZZLE2 #endif #if TEMP_SENSOR_BED != 0 MENU_ITEM_EDIT_int3_P(_T(MSG_BED), &target_temperature_bed, 0, BED_MAXTEMP - 3); #endif MENU_ITEM_EDIT_int3_P(_T(MSG_FAN_SPEED), &fanSpeed, 0, 255); #if defined AUTOTEMP && (TEMP_SENSOR_0 != 0) //MENU_ITEM_EDIT removed, following code must be redesigned if AUTOTEMP enabled MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &autotemp_enabled); MENU_ITEM_EDIT(float3, _i(" \002 Min"), &autotemp_min, 0, HEATER_0_MAXTEMP - 10);////MSG_MIN MENU_ITEM_EDIT(float3, _i(" \002 Max"), &autotemp_max, 0, HEATER_0_MAXTEMP - 10);////MSG_MAX MENU_ITEM_EDIT(float32, _i(" \002 Fact"), &autotemp_factor, 0.0, 1.0);////MSG_FACTOR #endif MENU_END(); } #if SDCARDDETECT == -1 static void lcd_sd_refresh() { card.initsd(); menu_top = 0; } #endif static void lcd_sd_updir() { card.updir(); menu_top = 0; } void lcd_print_stop() { if (!card.sdprinting) { SERIAL_ECHOLNRPGM(MSG_OCTOPRINT_CANCEL); // for Octoprint } cmdqueue_serial_disabled = false; //for when canceling a print with a fancheck CRITICAL_SECTION_START; // Clear any saved printing state cancel_saved_printing(); // Abort the planner/queue/sd planner_abort_hard(); cmdqueue_reset(); card.sdprinting = false; card.closefile(); st_reset_timer(); CRITICAL_SECTION_END; #ifdef MESH_BED_LEVELING mbl.active = false; //also prevents undoing the mbl compensation a second time in the second planner_abort_hard() #endif lcd_setstatuspgm(_T(MSG_PRINT_ABORTED)); stoptime = _millis(); unsigned long t = (stoptime - starttime - pause_time) / 1000; //time in s pause_time = 0; save_statistics(total_filament_used, t); lcd_commands_step = 0; lcd_commands_type = LcdCommands::Idle; lcd_cooldown(); //turns off heaters and fan; goes to status screen. cancel_heatup = true; //unroll temperature wait loop stack. current_position[Z_AXIS] += 10; //lift Z. plan_buffer_line_curposXYZE(manual_feedrate[Z_AXIS] / 60); if (axis_known_position[X_AXIS] && axis_known_position[Y_AXIS]) //if axis are homed, move to parked position. { current_position[X_AXIS] = X_CANCEL_POS; current_position[Y_AXIS] = Y_CANCEL_POS; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); } st_synchronize(); if (mmu_enabled) extr_unload(); //M702 C finishAndDisableSteppers(); //M84 lcd_setstatuspgm(_T(WELCOME_MSG)); custom_message_type = CustomMsg::Status; planner_abort_hard(); //needs to be done since plan_buffer_line resets waiting_inside_plan_buffer_line_print_aborted to false. Also copies current to destination. axis_relative_modes = E_AXIS_MASK; //XYZ absolute, E relative isPrintPaused = false; //clear isPrintPaused flag to allow starting next print after pause->stop scenario. } void lcd_sdcard_stop() { lcd_puts_at_P(0, 0, _T(MSG_STOP_PRINT)); lcd_puts_at_P(2, 2, _T(MSG_NO)); lcd_puts_at_P(2, 3, _T(MSG_YES)); lcd_putc_at(0, 2, ' '); lcd_putc_at(0, 3, ' '); if ((int32_t)lcd_encoder > 2) { lcd_encoder = 2; } if ((int32_t)lcd_encoder < 1) { lcd_encoder = 1; } lcd_putc_at(0, 1 + lcd_encoder, '>'); if (lcd_clicked()) { Sound_MakeSound(e_SOUND_TYPE_ButtonEcho); if ((int32_t)lcd_encoder == 1) { lcd_return_to_status(); } if ((int32_t)lcd_encoder == 2) { lcd_print_stop(); } } } void lcd_sdcard_menu() { uint8_t sdSort = eeprom_read_byte((uint8_t*)EEPROM_SD_SORT); if (card.presort_flag == true) { card.presort_flag = false; card.presort(); } if (lcd_draw_update == 0 && LCD_CLICKED == 0) //_delay(100); return; // nothing to do (so don't thrash the SD card) uint16_t fileCnt = card.getnrfilenames(); MENU_BEGIN(); MENU_ITEM_BACK_P(_T(bMain?MSG_MAIN:MSG_BACK)); // i.e. default menu-item / menu-item after card insertion card.getWorkDirName(); if (card.filename[0] == '/') { #if SDCARDDETECT == -1 MENU_ITEM_FUNCTION_P(_T(MSG_REFRESH), lcd_sd_refresh); #endif } else { MENU_ITEM_FUNCTION_P(PSTR(LCD_STR_FOLDER ".."), lcd_sd_updir); } for (uint16_t i = 0; i < fileCnt; i++) { if (menu_item == menu_line) { const uint16_t nr = ((sdSort == SD_SORT_NONE) || farm_mode || (sdSort == SD_SORT_TIME)) ? (fileCnt - 1 - i) : i; /*#ifdef SDCARD_RATHERRECENTFIRST #ifndef SDCARD_SORT_ALPHA fileCnt - 1 - #endif #endif i;*/ #ifdef SDCARD_SORT_ALPHA if (sdSort == SD_SORT_NONE) card.getfilename(nr); else card.getfilename_sorted(nr); #else card.getfilename(nr); #endif if (card.filenameIsDir) MENU_ITEM_SDDIR(card.filename, card.longFilename); else MENU_ITEM_SDFILE(_T(MSG_CARD_MENU), card.filename, card.longFilename); } else { MENU_ITEM_DUMMY(); } } MENU_END(); } #ifdef TMC2130 static void lcd_belttest_v() { lcd_belttest(); menu_back_if_clicked(); } void lcd_belttest() { lcd_clear(); // Belttest requires high power mode. Enable it. FORCE_HIGH_POWER_START; uint16_t X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)); uint16_t Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)); lcd_printf_P(_T(MSG_CHECKING_X)); lcd_set_cursor(0,1), lcd_printf_P(PSTR("X: %u -> ..."),X); KEEPALIVE_STATE(IN_HANDLER); // N.B: it doesn't make sense to handle !lcd_selfcheck...() because selftest_sg throws its own error screen // that clobbers ours, with more info than we could provide. So on fail we just fall through to take us back to status. if (lcd_selfcheck_axis_sg(X_AXIS)){ X = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_X)); lcd_set_cursor(10,1), lcd_printf_P(PSTR("%u"),X); // Show new X value next to old one. lcd_puts_at_P(0,2,_T(MSG_CHECKING_Y)); lcd_set_cursor(0,3), lcd_printf_P(PSTR("Y: %u -> ..."),Y); if (lcd_selfcheck_axis_sg(Y_AXIS)) { Y = eeprom_read_word((uint16_t*)(EEPROM_BELTSTATUS_Y)); lcd_set_cursor(10,3),lcd_printf_P(PSTR("%u"),Y); lcd_set_cursor(19, 3); lcd_print(LCD_STR_UPLEVEL); lcd_wait_for_click_delay(10); } } FORCE_HIGH_POWER_END; KEEPALIVE_STATE(NOT_BUSY); } #endif //TMC2130 #ifdef IR_SENSOR_ANALOG // called also from marlin_main.cpp void printf_IRSensorAnalogBoardChange(){ printf_P(PSTR("Filament sensor board change detected: revision%S\n"), FsensorIRVersionText()); } static bool lcd_selftest_IRsensor(bool bStandalone) { bool bPCBrev04; uint16_t volt_IR_int; volt_IR_int = current_voltage_raw_IR; bPCBrev04=(volt_IR_int < IRsensor_Hopen_TRESHOLD); printf_P(PSTR("Measured filament sensor high level: %4.2fV\n"), Raw2Voltage(volt_IR_int) ); if(volt_IR_int < IRsensor_Hmin_TRESHOLD){ if(!bStandalone) lcd_selftest_error(TestError::FsensorLevel,"HIGH",""); return(false); } lcd_show_fullscreen_message_and_wait_P(_i("Insert the filament (do not load it) into the extruder and then press the knob."));////c=20 r=6 volt_IR_int = current_voltage_raw_IR; printf_P(PSTR("Measured filament sensor low level: %4.2fV\n"), Raw2Voltage(volt_IR_int)); if(volt_IR_int > (IRsensor_Lmax_TRESHOLD)){ if(!bStandalone) lcd_selftest_error(TestError::FsensorLevel,"LOW",""); return(false); } if((bPCBrev04 ? 1 : 0) != (uint8_t)oFsensorPCB){ // safer then "(uint8_t)bPCBrev04" oFsensorPCB=bPCBrev04 ? ClFsensorPCB::_Rev04 : ClFsensorPCB::_Old; printf_IRSensorAnalogBoardChange(); eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,(uint8_t)oFsensorPCB); } return(true); } static void lcd_detect_IRsensor(){ bool bAction; bool loaded; bMenuFSDetect = true; // inhibits some code inside "manage_inactivity()" /// Check if filament is loaded. If it is loaded stop detection. /// @todo Add autodetection with MMU2s loaded = ! READ(IR_SENSOR_PIN); if(loaded ){ lcd_show_fullscreen_message_and_wait_P(_i("Please unload the filament first, then repeat this action.")); return; } else { lcd_show_fullscreen_message_and_wait_P(_i("Please check the IR sensor connection, unload filament if present.")); bAction = lcd_selftest_IRsensor(true); } if(bAction){ lcd_show_fullscreen_message_and_wait_P(_i("Sensor verified, remove the filament now."));////c=20 r=3 // the fsensor board has been successfully identified, any previous "not responding" may be cleared now fsensor_not_responding = false; } else { lcd_show_fullscreen_message_and_wait_P(_i("Verification failed, remove the filament and try again."));////c=20 r=5 // here it is unclear what to to with the fsensor_not_responding flag } bMenuFSDetect=false; // de-inhibits some code inside "manage_inactivity()" } #endif //IR_SENSOR_ANALOG static void lcd_selftest_v() { (void)lcd_selftest(); } bool lcd_selftest() { int _progress = 0; bool _result = true; bool _swapped_fan = false; #ifdef IR_SENSOR_ANALOG //! Check if IR sensor is in unknown state, if so run Fsensor Detection //! As the Fsensor Detection isn't yet ready for the mmu2s we set temporarily the IR sensor 0.3 or older for mmu2s //! @todo Don't forget to remove this as soon Fsensor Detection works with mmu if( oFsensorPCB == ClFsensorPCB::_Undef) { if (!mmu_enabled) { lcd_detect_IRsensor(); } else { eeprom_update_byte((uint8_t*)EEPROM_FSENSOR_PCB,0); } } #endif //IR_SENSOR_ANALOG lcd_wait_for_cool_down(); lcd_clear(); lcd_puts_at_P(0, 0, _i("Self test start "));////MSG_SELFTEST_START c=20 #ifdef TMC2130 FORCE_HIGH_POWER_START; #endif // TMC2130 FORCE_BL_ON_START; _delay(2000); KEEPALIVE_STATE(IN_HANDLER); _progress = lcd_selftest_screen(TestScreen::ExtruderFan, _progress, 3, true, 2000); #if (defined(FANCHECK) && defined(TACH_0)) switch (lcd_selftest_fan_auto(0)){ // check extruder Fan case FanCheck::ExtruderFan: _result = false; break; case FanCheck::SwappedFan: _swapped_fan = true; // no break default: _result = true; break; } #else //defined(TACH_0) _result = lcd_selftest_manual_fan_check(0, false); #endif //defined(TACH_0) if (!_result) { lcd_selftest_error(TestError::ExtruderFan, "", ""); } /* if (_result) { _progress = lcd_selftest_screen(TestScreen::PrintFan, _progress, 3, true, 2000); #if (defined(FANCHECK) && defined(TACH_1)) switch (lcd_selftest_fan_auto(1)){ // check print fan case FanCheck::PrintFan: _result = false; break; case FanCheck::SwappedFan: _swapped_fan = true; // no break default: _result = true; break; } #else //defined(TACH_1) _result = lcd_selftest_manual_fan_check(1, false); #endif //defined(TACH_1) if (!_result) { lcd_selftest_error(TestError::PrintFan, "", ""); //print fan not spinning } } if (_swapped_fan) { //turn on print fan and check that left extruder fan is not spinning _result = lcd_selftest_manual_fan_check(1, true); if (_result) { //print fan is stil turned on; check that it is spinning _result = lcd_selftest_manual_fan_check(1, false, true); if (!_result){ lcd_selftest_error(TestError::PrintFan, "", ""); } } else { // fans are swapped lcd_selftest_error(TestError::SwappedFan, "", ""); } } */ if (_result) { _progress = lcd_selftest_screen(TestScreen::FansOk, _progress, 3, true, 2000); _result = lcd_selfcheck_endstops(); //With TMC2130, only the Z probe is tested. } if (_result) { //current_position[Z_AXIS] += 15; //move Z axis higher to avoid false triggering of Z end stop in case that we are very low - just above heatbed _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 2000); #ifdef TMC2130 _result = lcd_selfcheck_axis_sg(X_AXIS); #else _result = lcd_selfcheck_axis(X_AXIS, X_MAX_POS); #endif //TMC2130 } if (_result) { _progress = lcd_selftest_screen(TestScreen::AxisX, _progress, 3, true, 0); #ifndef TMC2130 _result = lcd_selfcheck_pulleys(X_AXIS); #endif } if (_result) { _progress = lcd_selftest_screen(TestScreen::AxisY, _progress, 3, true, 1500); #ifdef TMC2130 _result = lcd_selfcheck_axis_sg(Y_AXIS); #else _result = lcd_selfcheck_axis(Y_AXIS, Y_MAX_POS); #endif // TMC2130 } if (_result) { _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 0); #ifndef TMC2130 _result = lcd_selfcheck_pulleys(Y_AXIS); #endif // TMC2130 } if (_result) { #ifdef TMC2130 tmc2130_home_exit(); enable_endstops(false); #endif //homeaxis(X_AXIS); //homeaxis(Y_AXIS); current_position[X_AXIS] = pgm_read_float(bed_ref_points_4); current_position[Y_AXIS] = pgm_read_float(bed_ref_points_4+1); #ifdef TMC2130 //current_position[X_AXIS] += 0; current_position[Y_AXIS] += 4; #endif //TMC2130 current_position[Z_AXIS] = current_position[Z_AXIS] + 10; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); set_destination_to_current(); _progress = lcd_selftest_screen(TestScreen::AxisZ, _progress, 3, true, 1500); #ifdef TMC2130 homeaxis(Z_AXIS); //In case of failure, the code gets stuck in this function. #else _result = lcd_selfcheck_axis(Z_AXIS, Z_MAX_POS); #endif //TMC2130 //raise Z to not damage the bed during and hotend testing current_position[Z_AXIS] += 20; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); } #ifdef TMC2130 if (_result) { current_position[Z_AXIS] = current_position[Z_AXIS] + 10; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); _progress = lcd_selftest_screen(TestScreen::Home, 0, 2, true, 0); bool bres = tmc2130_home_calibrate(X_AXIS); _progress = lcd_selftest_screen(TestScreen::Home, 1, 2, true, 0); bres &= tmc2130_home_calibrate(Y_AXIS); _progress = lcd_selftest_screen(TestScreen::Home, 2, 2, true, 0); if (bres) eeprom_update_byte((uint8_t*)EEPROM_TMC2130_HOME_ENABLED, 1); _result = bres; } #endif //TMC2130 if (_result) { _progress = lcd_selftest_screen(TestScreen::Bed, _progress, 3, true, 2000); _result = lcd_selfcheck_check_heater(true); } if (_result) { _progress = lcd_selftest_screen(TestScreen::Hotend, _progress, 3, true, 1000); _result = lcd_selfcheck_check_heater(false); } if (_result) { _progress = lcd_selftest_screen(TestScreen::HotendOk, _progress, 3, true, 2000); //nozzle ok } #ifdef FILAMENT_SENSOR if (_result) { if (mmu_enabled) { _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor _result = selftest_irsensor(); if (_result) { _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK } } else { #ifdef PAT9125 _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filaments sensor _result = lcd_selftest_fsensor(); if (_result) { _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //fil sensor OK } #endif //PAT9125 #if 0 // Intentionally disabled - that's why we moved the detection to runtime by just checking the two voltages. // The idea is not to force the user to remove and insert the filament on an assembled printer. //def IR_SENSOR_ANALOG _progress = lcd_selftest_screen(TestScreen::Fsensor, _progress, 3, true, 2000); //check filament sensor _result = lcd_selftest_IRsensor(); if (_result) { _progress = lcd_selftest_screen(TestScreen::FsensorOk, _progress, 3, true, 2000); //filament sensor OK } #endif //IR_SENSOR_ANALOG } } #endif //FILAMENT_SENSOR if (_result) { _progress = lcd_selftest_screen(TestScreen::AllCorrect, _progress, 3, true, 5000); //all correct } else { _progress = lcd_selftest_screen(TestScreen::Failed, _progress, 3, true, 5000); } lcd_reset_alert_level(); enquecommand_P(PSTR("M84")); lcd_update_enable(true); if (_result) { LCD_ALERTMESSAGERPGM(_i("Self test OK"));////MSG_SELFTEST_OK } else { LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED)); } #ifdef TMC2130 FORCE_HIGH_POWER_END; #endif // TMC2130 FORCE_BL_ON_END; KEEPALIVE_STATE(NOT_BUSY); return(_result); } #ifdef TMC2130 static void reset_crash_det(unsigned char axis) { current_position[axis] += 10; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); if (eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET)) tmc2130_sg_stop_on_crash = true; } static bool lcd_selfcheck_axis_sg(unsigned char axis) { // each axis length is measured twice float axis_length, current_position_init, current_position_final; float measured_axis_length[2]; float margin = 60; float max_error_mm = 5; switch (axis) { case 0: axis_length = X_MAX_POS; break; case 1: axis_length = Y_MAX_POS + 8; break; default: axis_length = 210; break; } tmc2130_sg_stop_on_crash = false; tmc2130_home_exit(); enable_endstops(true); raise_z_above(MESH_HOME_Z_SEARCH); st_synchronize(); tmc2130_home_enter(1 << axis); // first axis length measurement begin current_position[axis] -= (axis_length + margin); plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); tmc2130_sg_meassure_start(axis); current_position_init = st_get_position_mm(axis); current_position[axis] += 2 * margin; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); current_position[axis] += axis_length; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); uint16_t sg1 = tmc2130_sg_meassure_stop(); printf_P(PSTR("%c AXIS SG1=%d\n"), 'X'+axis, sg1); eeprom_write_word(((uint16_t*)((axis == X_AXIS)?EEPROM_BELTSTATUS_X:EEPROM_BELTSTATUS_Y)), sg1); current_position_final = st_get_position_mm(axis); measured_axis_length[0] = abs(current_position_final - current_position_init); // first measurement end and second measurement begin current_position[axis] -= margin; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); current_position[axis] -= (axis_length + margin); plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); current_position_init = st_get_position_mm(axis); measured_axis_length[1] = abs(current_position_final - current_position_init); tmc2130_home_exit(); //end of second measurement, now check for possible errors: for(uint_least8_t i = 0; i < 2; i++){ //check if measured axis length corresponds to expected length printf_P(_N("Measured axis length:%.3f\n"), measured_axis_length[i]); if (abs(measured_axis_length[i] - axis_length) > max_error_mm) { enable_endstops(false); const char *_error_1; if (axis == X_AXIS) _error_1 = "X"; if (axis == Y_AXIS) _error_1 = "Y"; if (axis == Z_AXIS) _error_1 = "Z"; lcd_selftest_error(TestError::Axis, _error_1, ""); current_position[axis] = 0; plan_set_position_curposXYZE(); reset_crash_det(axis); enable_endstops(true); endstops_hit_on_purpose(); return false; } } printf_P(_N("Axis length difference:%.3f\n"), abs(measured_axis_length[0] - measured_axis_length[1])); if (abs(measured_axis_length[0] - measured_axis_length[1]) > 1) { //check if difference between first and second measurement is low //loose pulleys const char *_error_1; if (axis == X_AXIS) _error_1 = "X"; if (axis == Y_AXIS) _error_1 = "Y"; if (axis == Z_AXIS) _error_1 = "Z"; lcd_selftest_error(TestError::Pulley, _error_1, ""); current_position[axis] = 0; plan_set_position_curposXYZE(); reset_crash_det(axis); endstops_hit_on_purpose(); return false; } current_position[axis] = 0; plan_set_position_curposXYZE(); reset_crash_det(axis); endstops_hit_on_purpose(); return true; } #endif //TMC2130 #ifndef TMC2130 static bool lcd_selfcheck_axis(int _axis, int _travel) { // printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _axis, _travel); bool _stepdone = false; bool _stepresult = false; int _progress = 0; int _travel_done = 0; int _err_endstop = 0; int _lcd_refresh = 0; _travel = _travel + (_travel / 10); if (_axis == X_AXIS) { current_position[Z_AXIS] += 17; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); } do { current_position[_axis] = current_position[_axis] - 1; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); #ifdef TMC2130 if ((READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING)) #else //TMC2130 if ((READ(X_MIN_PIN) ^ (bool)X_MIN_ENDSTOP_INVERTING) || (READ(Y_MIN_PIN) ^ (bool)Y_MIN_ENDSTOP_INVERTING) || (READ(Z_MIN_PIN) ^ (bool)Z_MIN_ENDSTOP_INVERTING)) #endif //TMC2130 { if (_axis == 0) { _stepresult = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? true : false; _err_endstop = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? 1 : 2; } if (_axis == 1) { _stepresult = ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) ? true : false; _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 2; } if (_axis == 2) { _stepresult = ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) ? true : false; _err_endstop = ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) ? 0 : 1; printf_P(PSTR("lcd_selfcheck_axis %d, %d\n"), _stepresult, _err_endstop); /*disable_x(); disable_y(); disable_z();*/ } _stepdone = true; } if (_lcd_refresh < 6) { _lcd_refresh++; } else { _progress = lcd_selftest_screen(static_cast(static_cast(TestScreen::AxisX) + _axis), _progress, 3, false, 0); _lcd_refresh = 0; } manage_heater(); manage_inactivity(true); //_delay(100); (_travel_done <= _travel) ? _travel_done++ : _stepdone = true; } while (!_stepdone); //current_position[_axis] = current_position[_axis] + 15; //plan_buffer_line_curposXYZE(manual_feedrate[0] / 60, active_extruder); if (!_stepresult) { const char *_error_1; const char *_error_2; if (_axis == X_AXIS) _error_1 = "X"; if (_axis == Y_AXIS) _error_1 = "Y"; if (_axis == Z_AXIS) _error_1 = "Z"; if (_err_endstop == 0) _error_2 = "X"; if (_err_endstop == 1) _error_2 = "Y"; if (_err_endstop == 2) _error_2 = "Z"; if (_travel_done >= _travel) { lcd_selftest_error(TestError::Endstop, _error_1, _error_2); } else { lcd_selftest_error(TestError::Motor, _error_1, _error_2); } } current_position[_axis] = 0; //simulate axis home to avoid negative numbers for axis position, especially Z. plan_set_position_curposXYZE(); return _stepresult; } static bool lcd_selfcheck_pulleys(int axis) { float tmp_motor_loud[3] = DEFAULT_PWM_MOTOR_CURRENT_LOUD; float tmp_motor[3] = DEFAULT_PWM_MOTOR_CURRENT; float current_position_init; float move; bool endstop_triggered = false; int i; unsigned long timeout_counter; refresh_cmd_timeout(); manage_inactivity(true); if (axis == 0) move = 50; //X_AXIS else move = 50; //Y_AXIS current_position_init = current_position[axis]; current_position[axis] += 2; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); for (i = 0; i < 5; i++) { refresh_cmd_timeout(); current_position[axis] = current_position[axis] + move; st_current_set(0, 850); //set motor current higher plan_buffer_line_curposXYZE(200); st_synchronize(); if (SilentModeMenu != SILENT_MODE_OFF) st_current_set(0, tmp_motor[0]); //set back to normal operation currents else st_current_set(0, tmp_motor_loud[0]); //set motor current back current_position[axis] = current_position[axis] - move; plan_buffer_line_curposXYZE(50); st_synchronize(); if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) || ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) { lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", ""); return(false); } } timeout_counter = _millis() + 2500; endstop_triggered = false; manage_inactivity(true); while (!endstop_triggered) { if (((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) || ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1)) { endstop_triggered = true; if (current_position_init - 1 <= current_position[axis] && current_position_init + 1 >= current_position[axis]) { current_position[axis] += 10; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); return(true); } else { lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", ""); return(false); } } else { current_position[axis] -= 1; plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); if (_millis() > timeout_counter) { lcd_selftest_error(TestError::Pulley, (axis == 0) ? "X" : "Y", ""); return(false); } } } return(true); } #endif //not defined TMC2130 static bool lcd_selfcheck_endstops() { bool _result = true; if ( #ifndef TMC2130 ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) || ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) || #endif //!TMC2130 ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1)) { #ifndef TMC2130 if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) current_position[0] += 10; if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) current_position[1] += 10; #endif //!TMC2130 if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) current_position[2] += 10; } plan_buffer_line_curposXYZE(manual_feedrate[0] / 60); st_synchronize(); if ( #ifndef TMC2130 ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) || ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) || #endif //!TMC2130 ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1)) { _result = false; char _error[4] = ""; #ifndef TMC2130 if ((READ(X_MIN_PIN) ^ X_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "X"); if ((READ(Y_MIN_PIN) ^ Y_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Y"); #endif //!TMC2130 if ((READ(Z_MIN_PIN) ^ Z_MIN_ENDSTOP_INVERTING) == 1) strcat(_error, "Z"); lcd_selftest_error(TestError::Endstops, _error, ""); } manage_heater(); manage_inactivity(true); return _result; } static bool lcd_selfcheck_check_heater(bool _isbed) { int _counter = 0; int _progress = 0; bool _stepresult = false; bool _docycle = true; int _checked_snapshot = (_isbed) ? degBed() : degHotend(0); int _opposite_snapshot = (_isbed) ? degHotend(0) : degBed(); int _cycles = (_isbed) ? 180 : 60; //~ 90s / 30s target_temperature[0] = (_isbed) ? 0 : 200; target_temperature_bed = (_isbed) ? 100 : 0; manage_heater(); manage_inactivity(true); KEEPALIVE_STATE(NOT_BUSY); //we are sending temperatures on serial line, so no need to send host keepalive messages do { _counter++; _docycle = (_counter < _cycles) ? true : false; manage_heater(); manage_inactivity(true); _progress = (_isbed) ? lcd_selftest_screen(TestScreen::Bed, _progress, 2, false, 400) : lcd_selftest_screen(TestScreen::Hotend, _progress, 2, false, 400); /*if (_isbed) { MYSERIAL.print("Bed temp:"); MYSERIAL.println(degBed()); } else { MYSERIAL.print("Hotend temp:"); MYSERIAL.println(degHotend(0)); }*/ if(_counter%5 == 0) serialecho_temperatures(); //show temperatures once in two seconds } while (_docycle); target_temperature[0] = 0; target_temperature_bed = 0; manage_heater(); int _checked_result = (_isbed) ? degBed() - _checked_snapshot : degHotend(0) - _checked_snapshot; int _opposite_result = (_isbed) ? degHotend(0) - _opposite_snapshot : degBed() - _opposite_snapshot; /* MYSERIAL.println(""); MYSERIAL.print("Checked result:"); MYSERIAL.println(_checked_result); MYSERIAL.print("Opposite result:"); MYSERIAL.println(_opposite_result); */ if (_opposite_result < ((_isbed) ? 30 : 9)) { if (_checked_result >= ((_isbed) ? 9 : 30)) { _stepresult = true; } else { lcd_selftest_error(TestError::Heater, "", ""); } } else { lcd_selftest_error(TestError::Bed, "", ""); } manage_heater(); manage_inactivity(true); KEEPALIVE_STATE(IN_HANDLER); return _stepresult; } static void lcd_selftest_error(TestError testError, const char *_error_1, const char *_error_2) { lcd_beeper_quick_feedback(); FORCE_BL_ON_END; target_temperature[0] = 0; target_temperature_bed = 0; manage_heater(); manage_inactivity(); lcd_clear(); lcd_puts_at_P(0, 0, _i("Selftest error !"));////MSG_SELFTEST_ERROR lcd_puts_at_P(0, 1, _i("Please check :"));////MSG_SELFTEST_PLEASECHECK switch (testError) { case TestError::Heater: lcd_puts_at_P(0, 2, _i("Heater/Thermistor"));////MSG_SELFTEST_HEATERTHERMISTOR lcd_puts_at_P(0, 3, _i("Not connected"));////MSG_SELFTEST_NOTCONNECTED break; case TestError::Bed: lcd_puts_at_P(0, 2, _i("Bed / Heater"));////MSG_SELFTEST_BEDHEATER lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR)); break; case TestError::Endstops: lcd_puts_at_P(0, 2, _i("Endstops"));////MSG_SELFTEST_ENDSTOPS lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR)); lcd_set_cursor(17, 3); lcd_print(_error_1); break; case TestError::Motor: lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_MOTOR)); lcd_set_cursor(18, 2); lcd_print(_error_1); lcd_puts_at_P(0, 3, _i("Endstop"));////MSG_SELFTEST_ENDSTOP lcd_set_cursor(18, 3); lcd_print(_error_2); break; case TestError::Endstop: lcd_puts_at_P(0, 2, _i("Endstop not hit"));////MSG_SELFTEST_ENDSTOP_NOTHIT c=20 lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_MOTOR)); lcd_set_cursor(18, 3); lcd_print(_error_1); break; case TestError::PrintFan: lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_COOLING_FAN)); lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR)); lcd_set_cursor(18, 3); lcd_print(_error_1); break; case TestError::ExtruderFan: lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_EXTRUDER_FAN)); lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR)); lcd_set_cursor(18, 3); lcd_print(_error_1); break; case TestError::Pulley: lcd_puts_at_P(0, 2, _i("Loose pulley"));////MSG_LOOSE_PULLEY c=20 r=1 lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_MOTOR)); lcd_set_cursor(18, 3); lcd_print(_error_1); break; case TestError::Axis: lcd_puts_at_P(0, 2, _i("Axis length"));////MSG_SELFTEST_AXIS_LENGTH lcd_puts_at_P(0, 3, _i("Axis"));////MSG_SELFTEST_AXIS lcd_set_cursor(18, 3); lcd_print(_error_1); break; case TestError::SwappedFan: lcd_puts_at_P(0, 2, _i("Front/left fans"));////MSG_SELFTEST_FANS lcd_puts_at_P(0, 3, _i("Swapped"));////MSG_SELFTEST_SWAPPED lcd_set_cursor(18, 3); lcd_print(_error_1); break; case TestError::WiringFsensor: lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR)); lcd_puts_at_P(0, 3, _T(MSG_SELFTEST_WIRINGERROR)); break; case TestError::TriggeringFsensor: lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR)); lcd_puts_at_P(0, 3, _i("False triggering"));////c=20 break; case TestError::FsensorLevel: lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR)); lcd_set_cursor(0, 3); lcd_printf_P(_i("%s level expected"),_error_1);////c=20 break; } _delay(1000); lcd_beeper_quick_feedback(); do { _delay(100); manage_heater(); manage_inactivity(); } while (!lcd_clicked()); LCD_ALERTMESSAGERPGM(_T(MSG_SELFTEST_FAILED)); lcd_return_to_status(); } #ifdef FILAMENT_SENSOR #ifdef PAT9125 static bool lcd_selftest_fsensor(void) { fsensor_init(); if (fsensor_not_responding) { lcd_selftest_error(TestError::WiringFsensor, "", ""); } return (!fsensor_not_responding); } #endif //PAT9125 //! @brief Self-test of infrared barrier filament sensor mounted on MK3S with MMUv2 printer //! //! Test whether sensor is not triggering filament presence when extruder idler is moving without filament. //! //! Steps: //! * Backup current active extruder temperature //! * Pre-heat to PLA extrude temperature. //! * Unload filament possibly present. //! * Move extruder idler same way as during filament load //! and sample IR_SENSOR_PIN. //! * Check that pin doesn't go low. //! //! @retval true passed //! @retval false failed static bool selftest_irsensor() { class TempBackup { public: TempBackup(): m_temp(degTargetHotend(active_extruder)), m_extruder(active_extruder){} ~TempBackup(){setTargetHotend(m_temp,m_extruder);} private: float m_temp; uint8_t m_extruder; }; uint8_t progress; { TempBackup tempBackup; setTargetHotend(ABS_PREHEAT_HOTEND_TEMP,active_extruder); mmu_wait_for_heater_blocking(); progress = lcd_selftest_screen(TestScreen::Fsensor, 0, 1, true, 0); mmu_filament_ramming(); } progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0); mmu_command(MmuCmd::U0); manage_response(false, false); for(uint_least8_t i = 0; i < 200; ++i) { if (0 == (i % 32)) progress = lcd_selftest_screen(TestScreen::Fsensor, progress, 1, true, 0); mmu_load_step(false); while (blocks_queued()) { if (READ(IR_SENSOR_PIN) == 0) { lcd_selftest_error(TestError::TriggeringFsensor, "", ""); return false; } #ifdef TMC2130 manage_heater(); // Vojtech: Don't disable motors inside the planner! if (!tmc2130_update_sg()) { manage_inactivity(true); } #else //TMC2130 manage_heater(); // Vojtech: Don't disable motors inside the planner! manage_inactivity(true); #endif //TMC2130 } } return true; } #endif //FILAMENT_SENSOR static bool lcd_selftest_manual_fan_check(int _fan, bool check_opposite, bool _default) { bool _result = check_opposite; lcd_clear(); lcd_puts_at_P(0, 0, _T(MSG_SELFTEST_FAN)); switch (_fan) { case 0: // extruder cooling fan lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_COOLING_FAN) : _T(MSG_SELFTEST_EXTRUDER_FAN)); setExtruderAutoFanState(3); break; case 1: // object cooling fan lcd_puts_at_P(0, 1, check_opposite ? _T(MSG_SELFTEST_EXTRUDER_FAN) : _T(MSG_SELFTEST_COOLING_FAN)); SET_OUTPUT(FAN_PIN); #ifdef FAN_SOFT_PWM fanSpeedSoftPwm = 255; #else //FAN_SOFT_PWM analogWrite(FAN_PIN, 255); #endif //FAN_SOFT_PWM break; } _delay(500); lcd_puts_at_P(1, 2, _T(MSG_SELFTEST_FAN_YES)); lcd_putc_at(0, 3, '>'); lcd_puts_at_P(1, 3, _T(MSG_SELFTEST_FAN_NO)); int8_t enc_dif = int(_default)*3; KEEPALIVE_STATE(PAUSED_FOR_USER); lcd_button_pressed = false; do { if (abs((enc_dif - lcd_encoder_diff)) > 2) { if (enc_dif > lcd_encoder_diff) { _result = !check_opposite; lcd_putc_at(0, 2, '>'); lcd_puts_at_P(1, 2, _T(MSG_SELFTEST_FAN_YES)); lcd_putc_at(0, 3, ' '); lcd_puts_at_P(1, 3, _T(MSG_SELFTEST_FAN_NO)); } if (enc_dif < lcd_encoder_diff) { _result = check_opposite; lcd_putc_at(0, 2, ' '); lcd_puts_at_P(1, 2, _T(MSG_SELFTEST_FAN_YES)); lcd_putc_at(0, 3, '>'); lcd_puts_at_P(1, 3, _T(MSG_SELFTEST_FAN_NO)); } enc_dif = 0; lcd_encoder_diff = 0; } manage_heater(); _delay(100); } while (!lcd_clicked()); KEEPALIVE_STATE(IN_HANDLER); setExtruderAutoFanState(0); SET_OUTPUT(FAN_PIN); #ifdef FAN_SOFT_PWM fanSpeedSoftPwm = 0; #else //FAN_SOFT_PWM analogWrite(FAN_PIN, 0); #endif //FAN_SOFT_PWM fanSpeed = 0; manage_heater(); return _result; } #ifdef FANCHECK static FanCheck lcd_selftest_fan_auto(int _fan) { switch (_fan) { case 0: fanSpeed = 0; manage_heater(); //turn off fan setExtruderAutoFanState(3); //extruder fan #ifdef FAN_SOFT_PWM extruder_autofan_last_check = _millis(); fan_measuring = true; #endif //FAN_SOFT_PWM _delay(2000); setExtruderAutoFanState(0); //extruder fan manage_heater(); //count average fan speed from 2s delay and turn off fans puts_P(PSTR("Test 1:")); printf_P(PSTR("Print fan speed: %d\n"), fan_speed[1]); printf_P(PSTR("Extr fan speed: %d\n"), fan_speed[0]); if (fan_speed[0] < 20) { // < 1200 RPM would mean either a faulty Noctua or Altfan return FanCheck::ExtruderFan; } #ifdef FAN_SOFT_PWM else if (fan_speed[0] > 50 ) { // printerFan is faster return FanCheck::SwappedFan; } break; #endif case 1: //will it work with Thotend > 50 C ? #ifdef FAN_SOFT_PWM fanSpeed = 255; fanSpeedSoftPwm = 255; extruder_autofan_last_check = _millis(); //store time when measurement starts fan_measuring = true; //start fan measuring, rest is on manage_heater #else //FAN_SOFT_PWM fanSpeed = 150; //print fan #endif //FAN_SOFT_PWM for (uint8_t i = 0; i < 5; i++) { delay_keep_alive(1000); lcd_putc_at(18, 3, '-'); delay_keep_alive(1000); lcd_putc_at(18, 3, '|'); } fanSpeed = 0; #ifdef FAN_SOFT_PWM fanSpeedSoftPwm = 0; #else //FAN_SOFT_PWM manage_heater(); //turn off fan manage_inactivity(true); //to turn off print fan #endif //FAN_SOFT_PWM puts_P(PSTR("Test 2:")); printf_P(PSTR("Print fan speed: %d\n"), fan_speed[1]); printf_P(PSTR("Extr fan speed: %d\n"), fan_speed[0]); if (!fan_speed[1]) { return FanCheck::PrintFan; } #ifdef FAN_SOFT_PWM fanSpeed = 80; fanSpeedSoftPwm = 80; for (uint8_t i = 0; i < 5; i++) { delay_keep_alive(1000); lcd_putc_at(18, 3, '-'); delay_keep_alive(1000); lcd_putc_at(18, 3, '|'); } fanSpeed = 0; // noctua speed is between 17 and 24, turbine more then 30 if (fan_speed[1] < 30) { return FanCheck::SwappedFan; } #else // fan is spinning, but measured RPM are too low for print fan, it must // be left extruder fan else if (fan_speed[1] < 34) { return FanCheck::SwappedFan; } #endif //FAN_SOFT_PWM break; } return FanCheck::Success; } #endif //FANCHECK static int lcd_selftest_screen(TestScreen screen, int _progress, int _progress_scale, bool _clear, int _delay) { lcd_update_enable(false); const char *_indicator = (_progress >= _progress_scale) ? "-" : "|"; if (_clear) lcd_clear(); lcd_set_cursor(0, 0); if (screen == TestScreen::ExtruderFan) lcd_puts_P(_T(MSG_SELFTEST_FAN)); if (screen == TestScreen::PrintFan) lcd_puts_P(_T(MSG_SELFTEST_FAN)); if (screen == TestScreen::FansOk) lcd_puts_P(_T(MSG_SELFTEST_FAN)); if (screen == TestScreen::EndStops) lcd_puts_P(_i("Checking endstops"));////MSG_SELFTEST_CHECK_ENDSTOPS c=20 if (screen == TestScreen::AxisX) lcd_puts_P(_T(MSG_CHECKING_X)); if (screen == TestScreen::AxisY) lcd_puts_P(_T(MSG_CHECKING_Y)); if (screen == TestScreen::AxisZ) lcd_puts_P(_i("Checking Z axis"));////MSG_SELFTEST_CHECK_Z c=20 if (screen == TestScreen::Bed) lcd_puts_P(_T(MSG_SELFTEST_CHECK_BED)); if (screen == TestScreen::Hotend || screen == TestScreen::HotendOk) lcd_puts_P(_i("Checking hotend "));////MSG_SELFTEST_CHECK_HOTEND c=20 if (screen == TestScreen::Fsensor) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR)); if (screen == TestScreen::FsensorOk) lcd_puts_P(_T(MSG_SELFTEST_CHECK_FSENSOR)); if (screen == TestScreen::AllCorrect) lcd_puts_P(_i("All correct "));////MSG_SELFTEST_CHECK_ALLCORRECT c=20 if (screen == TestScreen::Failed) lcd_puts_P(_T(MSG_SELFTEST_FAILED)); if (screen == TestScreen::Home) lcd_puts_P(_i("Calibrating home"));////c=20 r=1 lcd_puts_at_P(0, 1, separator); if ((screen >= TestScreen::ExtruderFan) && (screen <= TestScreen::FansOk)) { //SERIAL_ECHOLNPGM("Fan test"); lcd_puts_at_P(0, 2, _i("Extruder fan:"));////MSG_SELFTEST_EXTRUDER_FAN_SPEED c=18 lcd_set_cursor(18, 2); (screen < TestScreen::PrintFan) ? lcd_print(_indicator) : lcd_print("OK"); lcd_puts_at_P(0, 3, _i("Print fan:"));////MSG_SELFTEST_PRINT_FAN_SPEED c=18 lcd_set_cursor(18, 3); (screen < TestScreen::FansOk) ? lcd_print(_indicator) : lcd_print("OK"); } else if (screen >= TestScreen::Fsensor && screen <= TestScreen::FsensorOk) { lcd_puts_at_P(0, 2, _T(MSG_SELFTEST_FILAMENT_SENSOR)); lcd_putc(':'); lcd_set_cursor(18, 2); (screen == TestScreen::Fsensor) ? lcd_print(_indicator) : lcd_print("OK"); } else if (screen < TestScreen::Fsensor) { //SERIAL_ECHOLNPGM("Other tests"); TestScreen _step_block = TestScreen::AxisX; lcd_selftest_screen_step(2, 2, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("X"), _indicator); _step_block = TestScreen::AxisY; lcd_selftest_screen_step(2, 8, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Y"), _indicator); _step_block = TestScreen::AxisZ; lcd_selftest_screen_step(2, 14, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Z"), _indicator); _step_block = TestScreen::Bed; lcd_selftest_screen_step(3, 0, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Bed"), _indicator); _step_block = TestScreen::Hotend; lcd_selftest_screen_step(3, 9, ((screen == _step_block) ? 1 : (screen < _step_block) ? 0 : 2), PSTR("Hotend"), _indicator); } if (_delay > 0) delay_keep_alive(_delay); _progress++; return (_progress >= _progress_scale * 2) ? 0 : _progress; } static void lcd_selftest_screen_step(int _row, int _col, int _state, const char *_name_PROGMEM, const char *_indicator) { lcd_set_cursor(_col, _row); uint8_t strlenNameP = strlen_P(_name_PROGMEM); switch (_state) { case 1: lcd_puts_P(_name_PROGMEM); lcd_putc_at(_col + strlenNameP, _row, ':'); lcd_set_cursor(_col + strlenNameP + 1, _row); lcd_print(_indicator); break; case 2: lcd_puts_P(_name_PROGMEM); lcd_putc_at(_col + strlenNameP, _row, ':'); lcd_puts_at_P(_col + strlenNameP + 1, _row, PSTR("OK")); break; default: lcd_puts_P(_name_PROGMEM); } } /** End of menus **/ /** Menu action functions **/ static bool check_file(const char* filename) { if (farm_mode) return true; card.openFileReadFilteredGcode(filename, true); bool result = false; const uint32_t filesize = card.getFileSize(); uint32_t startPos = 0; const uint16_t bytesToCheck = min(END_FILE_SECTION, filesize); uint8_t blocksPrinted = 0; if (filesize > END_FILE_SECTION) { startPos = filesize - END_FILE_SECTION; card.setIndex(startPos); } cmdqueue_reset(); cmdqueue_serial_disabled = true; lcd_clear(); lcd_puts_at_P(0, 1, _i("Checking file"));////c=20 r=1 lcd_set_cursor(0, 2); while (!card.eof() && !result) { for (; blocksPrinted < (((card.get_sdpos() - startPos) * LCD_WIDTH) / bytesToCheck); blocksPrinted++) lcd_print('\xFF'); //simple progress bar card.sdprinting = true; get_command(); result = check_commands(); } for (; blocksPrinted < LCD_WIDTH; blocksPrinted++) lcd_print('\xFF'); //simple progress bar _delay(100); //for the user to see the end of the progress bar. cmdqueue_serial_disabled = false; card.printingHasFinished(); strncpy_P(lcd_status_message, _T(WELCOME_MSG), LCD_WIDTH); lcd_finishstatus(); return result; } static void menu_action_sdfile(const char* filename) { loading_flag = false; char cmd[30]; char* c; bool result = true; sprintf_P(cmd, PSTR("M23 %s"), filename); for (c = &cmd[4]; *c; c++) *c = tolower(*c); const char end[5] = ".gco"; //we are storing just first 8 characters of 8.3 filename assuming that extension is always ".gco" for (uint_least8_t i = 0; i < 8; i++) { if (strcmp((cmd + i + 4), end) == 0) { //filename is shorter then 8.3, store '\0' character on position where ".gco" string was found to terminate stored string properly eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, '\0'); break; } else { eeprom_write_byte((uint8_t*)EEPROM_FILENAME + i, cmd[i + 4]); } } uint8_t depth = (uint8_t)card.getWorkDirDepth(); eeprom_write_byte((uint8_t*)EEPROM_DIR_DEPTH, depth); for (uint_least8_t i = 0; i < depth; i++) { for (uint_least8_t j = 0; j < 8; j++) { eeprom_write_byte((uint8_t*)EEPROM_DIRS + j + 8 * i, card.dir_names[i][j]); } } if (!check_file(filename)) { result = lcd_show_fullscreen_message_yes_no_and_wait_P(_i("File incomplete. Continue anyway?"), false, false);////MSG_FILE_INCOMPLETE c=20 r=3 lcd_update_enable(true); } if (result) { enquecommand(cmd); enquecommand_P(PSTR("M24")); } lcd_return_to_status(); } void menu_action_sddirectory(const char* filename) { card.chdir(filename, true); lcd_encoder = 0; } /** LCD API **/ void ultralcd_init() { { uint8_t autoDepleteRaw = eeprom_read_byte(reinterpret_cast(EEPROM_AUTO_DEPLETE)); if (0xff == autoDepleteRaw) lcd_autoDeplete = false; else lcd_autoDeplete = autoDepleteRaw; } backlight_init(); lcd_init(); lcd_refresh(); lcd_longpress_func = menu_lcd_longpress_func; lcd_charsetup_func = menu_lcd_charsetup_func; lcd_lcdupdate_func = menu_lcd_lcdupdate_func; menu_menu = lcd_status_screen; menu_lcd_charsetup_func(); SET_INPUT(BTN_EN1); SET_INPUT(BTN_EN2); WRITE(BTN_EN1, HIGH); WRITE(BTN_EN2, HIGH); #if BTN_ENC > 0 SET_INPUT(BTN_ENC); WRITE(BTN_ENC, HIGH); #endif #if defined (SDSUPPORT) && defined(SDCARDDETECT) && (SDCARDDETECT > 0) pinMode(SDCARDDETECT, INPUT); WRITE(SDCARDDETECT, HIGH); lcd_oldcardstatus = IS_SD_INSERTED; #endif//(SDCARDDETECT > 0) lcd_encoder_diff = 0; } void lcd_printer_connected() { printer_connected = true; } static void lcd_send_status() { if (farm_mode && no_response && ((_millis() - NcTime) > (NC_TIME * 1000))) { //send important status messages periodicaly prusa_statistics(important_status, saved_filament_type); NcTime = _millis(); #ifdef FARM_CONNECT_MESSAGE lcd_connect_printer(); #endif //FARM_CONNECT_MESSAGE } } #ifdef FARM_CONNECT_MESSAGE static void lcd_connect_printer() { lcd_update_enable(false); lcd_clear(); int i = 0; int t = 0; lcd_set_custom_characters_progress(); lcd_puts_at_P(0, 0, _i("Connect printer to")); lcd_puts_at_P(0, 1, _i("monitoring or hold")); lcd_puts_at_P(0, 2, _i("the knob to continue")); while (no_response) { i++; t++; delay_keep_alive(100); proc_commands(); if (t == 10) { prusa_statistics(important_status, saved_filament_type); t = 0; } if (READ(BTN_ENC)) { //if button is not pressed i = 0; lcd_puts_at_P(0, 3, PSTR(" ")); } if (i!=0) lcd_puts_at_P((i * 20) / (NC_BUTTON_LONG_PRESS * 10), 3, "\x01"); if (i == NC_BUTTON_LONG_PRESS * 10) { no_response = false; } } lcd_set_custom_characters_degree(); lcd_update_enable(true); lcd_update(2); } #endif //FARM_CONNECT_MESSAGE void lcd_ping() { //chceck if printer is connected to monitoring when in farm mode if (farm_mode) { bool empty = is_buffer_empty(); if ((_millis() - PingTime) * 0.001 > (empty ? PING_TIME : PING_TIME_LONG)) { //if commands buffer is empty use shorter time period //if there are comamnds in buffer, some long gcodes can delay execution of ping command //therefore longer period is used printer_connected = false; } else { lcd_printer_connected(); } } } void lcd_ignore_click(bool b) { ignore_click = b; wait_for_unclick = false; } void lcd_finishstatus() { SERIAL_PROTOCOLLNRPGM(MSG_LCD_STATUS_CHANGED); int len = strlen(lcd_status_message); if (len > 0) { while (len < LCD_WIDTH) { lcd_status_message[len++] = ' '; } } lcd_status_message[LCD_WIDTH] = '\0'; lcd_draw_update = 2; } void lcd_setstatus(const char* message) { if (lcd_status_message_level > 0) return; lcd_updatestatus(message); } void lcd_updatestatuspgm(const char *message){ strncpy_P(lcd_status_message, message, LCD_WIDTH); lcd_status_message[LCD_WIDTH] = 0; lcd_finishstatus(); // hack lcd_draw_update to 1, i.e. without clear lcd_draw_update = 1; } void lcd_setstatuspgm(const char* message) { if (lcd_status_message_level > 0) return; lcd_updatestatuspgm(message); } void lcd_updatestatus(const char *message){ strncpy(lcd_status_message, message, LCD_WIDTH); lcd_status_message[LCD_WIDTH] = 0; lcd_finishstatus(); // hack lcd_draw_update to 1, i.e. without clear lcd_draw_update = 1; } void lcd_setalertstatuspgm(const char* message) { lcd_setstatuspgm(message); lcd_status_message_level = 1; lcd_return_to_status(); } void lcd_setalertstatus(const char* message) { lcd_setstatus(message); lcd_status_message_level = 1; lcd_return_to_status(); } void lcd_reset_alert_level() { lcd_status_message_level = 0; } uint8_t get_message_level() { return lcd_status_message_level; } void menu_lcd_longpress_func(void) { backlight_wake(); if (homing_flag || mesh_bed_leveling_flag || menu_menu == lcd_babystep_z || menu_menu == lcd_move_z) { // disable longpress during re-entry, while homing or calibration lcd_quick_feedback(); return; } if (menu_menu == lcd_hw_setup_menu) { // only toggle the experimental menu visibility flag lcd_quick_feedback(); lcd_experimental_toggle(); return; } // explicitely listed menus which are allowed to rise the move-z or live-adj-z functions // The lists are not the same for both functions, so first decide which function is to be performed if ( (moves_planned() || IS_SD_PRINTING || is_usb_printing )){ // long press as live-adj-z if(( current_position[Z_AXIS] < Z_HEIGHT_HIDE_LIVE_ADJUST_MENU ) // only allow live-adj-z up to 2mm of print height && ( menu_menu == lcd_status_screen // and in listed menus... || menu_menu == lcd_main_menu || menu_menu == lcd_tune_menu || menu_menu == lcd_support_menu ) ){ lcd_clear(); menu_submenu(lcd_babystep_z); } else { // otherwise consume the long press as normal click if( menu_menu != lcd_status_screen ) menu_back(); } } else { // long press as move-z if(menu_menu == lcd_status_screen || menu_menu == lcd_main_menu || menu_menu == lcd_preheat_menu || menu_menu == lcd_sdcard_menu || menu_menu == lcd_settings_menu || menu_menu == lcd_control_temperature_menu #if (LANG_MODE != 0) || menu_menu == lcd_language #endif || menu_menu == lcd_support_menu ){ move_menu_scale = 1.0; menu_submenu(lcd_move_z); } else { // otherwise consume the long press as normal click if( menu_menu != lcd_status_screen ) menu_back(); } } } void menu_lcd_charsetup_func(void) { if (menu_menu == lcd_status_screen) lcd_set_custom_characters_degree(); else lcd_set_custom_characters_arrows(); } static inline bool z_menu_expired() { return (menu_menu == lcd_babystep_z && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS_BABYSTEP_Z)); } static inline bool other_menu_expired() { return (menu_menu != lcd_status_screen && menu_menu != lcd_babystep_z && lcd_timeoutToStatus.expired(LCD_TIMEOUT_TO_STATUS)); } static inline bool forced_menu_expire() { bool retval = (menu_menu != lcd_status_screen && forceMenuExpire); forceMenuExpire = false; return retval; } void menu_lcd_lcdupdate_func(void) { #if (SDCARDDETECT > 0) if ((IS_SD_INSERTED != lcd_oldcardstatus)) { lcd_draw_update = 2; lcd_oldcardstatus = IS_SD_INSERTED; lcd_refresh(); // to maybe revive the LCD if static electricity killed it. backlight_wake(); if (lcd_oldcardstatus) { card.initsd(); LCD_MESSAGERPGM(_T(WELCOME_MSG)); bMain=false; // flag (i.e. 'fake parameter') for 'lcd_sdcard_menu()' function menu_submenu(lcd_sdcard_menu); //get_description(); } else { if(menu_menu==lcd_sdcard_menu) menu_back(); card.release(); LCD_MESSAGERPGM(_i("Card removed"));////MSG_SD_REMOVED } } #endif//CARDINSERTED backlight_update(); if (lcd_next_update_millis < _millis()) { if (abs(lcd_encoder_diff) >= ENCODER_PULSES_PER_STEP) { if (lcd_draw_update == 0) lcd_draw_update = 1; lcd_encoder += lcd_encoder_diff / ENCODER_PULSES_PER_STEP; Sound_MakeSound(e_SOUND_TYPE_EncoderMove); lcd_encoder_diff = 0; lcd_timeoutToStatus.start(); backlight_wake(); } if (LCD_CLICKED) { lcd_timeoutToStatus.start(); backlight_wake(); } (*menu_menu)(); if (z_menu_expired() || other_menu_expired() || forced_menu_expire()) { // Exiting a menu. Let's call the menu function the last time with menu_leaving flag set to true // to give it a chance to save its state. // This is useful for example, when the babystep value has to be written into EEPROM. if (menu_menu != NULL) { menu_leaving = 1; (*menu_menu)(); menu_leaving = 0; } lcd_clear(); lcd_return_to_status(); lcd_draw_update = 2; } if (lcd_draw_update == 2) lcd_clear(); if (lcd_draw_update) lcd_draw_update--; lcd_next_update_millis = _millis() + LCD_UPDATE_INTERVAL; } if (!SdFatUtil::test_stack_integrity()) stack_error(); lcd_ping(); //check that we have received ping command if we are in farm mode lcd_send_status(); if (lcd_commands_type == LcdCommands::Layer1Cal) lcd_commands(); } #ifdef TMC2130 //! @brief Is crash detection enabled? //! //! @retval true crash detection enabled //! @retval false crash detection disabled bool lcd_crash_detect_enabled() { return eeprom_read_byte((uint8_t*)EEPROM_CRASH_DET); } void lcd_crash_detect_enable() { tmc2130_sg_stop_on_crash = true; eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0xFF); } void lcd_crash_detect_disable() { tmc2130_sg_stop_on_crash = false; tmc2130_sg_crash = 0; eeprom_update_byte((uint8_t*)EEPROM_CRASH_DET, 0x00); } #endif void lcd_experimental_toggle() { uint8_t oldVal = eeprom_read_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY); if (oldVal == EEPROM_EMPTY_VALUE) oldVal = 0; else oldVal = !oldVal; eeprom_update_byte((uint8_t *)EEPROM_EXPERIMENTAL_VISIBILITY, oldVal); } void lcd_experimental_menu() { MENU_BEGIN(); MENU_ITEM_BACK_P(_T(MSG_BACK)); #ifdef EXTRUDER_ALTFAN_DETECT MENU_ITEM_TOGGLE_P(_N("ALTFAN det."), altfanOverride_get()?_T(MSG_OFF):_T(MSG_ON), altfanOverride_toggle);////MSG_MENU_ALTFAN c=18 #endif //EXTRUDER_ALTFAN_DETECT MENU_END(); } #ifdef PINDA_TEMP_COMP void lcd_pinda_temp_compensation_toggle() { uint8_t pinda_temp_compensation = eeprom_read_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION); if (pinda_temp_compensation == EEPROM_EMPTY_VALUE) // On MK2.5/S the EEPROM_EMPTY_VALUE will be set to 0 during eeprom_init. pinda_temp_compensation = 1; // But for MK3/S it should be 1 so SuperPINDA is "active" else pinda_temp_compensation = !pinda_temp_compensation; eeprom_update_byte((uint8_t*)EEPROM_PINDA_TEMP_COMPENSATION, pinda_temp_compensation); SERIAL_ECHOLNPGM("SuperPINDA:"); SERIAL_ECHOLN(pinda_temp_compensation); } #endif //PINDA_TEMP_COMP