/** * English * * LCD Menu Messages * Please note these are limited to 17 characters! * */ #ifndef LANGUAGE_EN_H #define LANGUAGE_EN_H #define WELCOME_MSG CUSTOM_MENDEL_NAME " ready." #define MSG_SD_INSERTED "Card inserted" #define MSG_SD_REMOVED "Card removed" #define MSG_MAIN "Main" #define MSG_AUTOSTART "Autostart" #define MSG_DISABLE_STEPPERS "Disable steppers" #define MSG_AUTO_HOME "Auto home" #define MSG_SET_HOME_OFFSETS "Set home offsets" #define MSG_SET_ORIGIN "Set origin" #define MSG_PREHEAT_PLA "Preheat PLA" #define MSG_PREHEAT_PLA0 "Preheat PLA 1" #define MSG_PREHEAT_PLA1 "Preheat PLA 2" #define MSG_PREHEAT_PLA2 "Preheat PLA 3" #define MSG_PREHEAT_PLA012 "Preheat PLA All" #define MSG_PREHEAT_PLA_BEDONLY "Preheat PLA Bed" #define MSG_PREHEAT_PLA_SETTINGS "Preheat PLA conf" #define MSG_PREHEAT_ABS "Preheat ABS" #define MSG_PREHEAT_ABS0 "Preheat ABS 1" #define MSG_PREHEAT_ABS1 "Preheat ABS 2" #define MSG_PREHEAT_ABS2 "Preheat ABS 3" #define MSG_PREHEAT_ABS012 "Preheat ABS All" #define MSG_PREHEAT_ABS_BEDONLY "Preheat ABS Bed" #define MSG_PREHEAT_ABS_SETTINGS "Preheat ABS conf" #define MSG_COOLDOWN "Cooldown" #define MSG_SWITCH_PS_ON "Switch power on" #define MSG_SWITCH_PS_OFF "Switch power off" #define MSG_EXTRUDE "Extrude" #define MSG_RETRACT "Retract" #define MSG_MOVE_AXIS "Move axis" #define MSG_MOVE_X "Move X" #define MSG_MOVE_Y "Move Y" #define MSG_MOVE_Z "Move Z" #define MSG_MOVE_E "Extruder" #define MSG_MOVE_E1 "Extruder2" #define MSG_MOVE_E2 "Extruder3" #define MSG_MOVE_01MM "Move 0.1mm" #define MSG_MOVE_1MM "Move 1mm" #define MSG_MOVE_10MM "Move 10mm" #define MSG_SPEED "Speed" #define MSG_NOZZLE "Nozzle" #define MSG_NOZZLE1 "Nozzle2" #define MSG_NOZZLE2 "Nozzle3" #define MSG_BED "Bed" #define MSG_FAN_SPEED "Fan speed" #define MSG_FLOW "Flow" #define MSG_FLOW0 "Flow 0" #define MSG_FLOW1 "Flow 1" #define MSG_FLOW2 "Flow 2" #define MSG_CONTROL "Control" #define MSG_MIN " \002 Min" #define MSG_MAX " \002 Max" #define MSG_FACTOR " \002 Fact" #define MSG_AUTOTEMP "Autotemp" #define MSG_ON "On " #define MSG_OFF "Off" #define MSG_PID_P "PID-P" #define MSG_PID_I "PID-I" #define MSG_PID_D "PID-D" #define MSG_PID_C "PID-C" #define MSG_ACC "Accel" #define MSG_VXY_JERK "Vxy-jerk" #define MSG_VZ_JERK "Vz-jerk" #define MSG_VE_JERK "Ve-jerk" #define MSG_VMAX "Vmax " #define MSG_X "x" #define MSG_Y "y" #define MSG_Z "z" #define MSG_E "e" #define MSG_VMIN "Vmin" #define MSG_VTRAV_MIN "VTrav min" #define MSG_AMAX "Amax " #define MSG_A_RETRACT "A-retract" #define MSG_XSTEPS "Xsteps/mm" #define MSG_YSTEPS "Ysteps/mm" #define MSG_ZSTEPS "Zsteps/mm" #define MSG_ESTEPS "Esteps/mm" #define MSG_TEMPERATURE "Temperature" #define MSG_MOTION "Motion" #define MSG_VOLUMETRIC "Filament" #define MSG_VOLUMETRIC_ENABLED "E in mm3" #define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1" #define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2" #define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3" #define MSG_CONTRAST "LCD contrast" #define MSG_STORE_EPROM "Store memory" #define MSG_LOAD_EPROM "Load memory" #define MSG_RESTORE_FAILSAFE "Restore failsafe" #define MSG_REFRESH "\xF8" "Refresh" #define MSG_WATCH "Info screen" #define MSG_PREPARE "Prepare" #define MSG_TUNE "Tune" #define MSG_PAUSE_PRINT "Pause print" #define MSG_RESUME_PRINT "Resume print" #define MSG_STOP_PRINT "Stop print" #define MSG_CARD_MENU "Print from SD" #define MSG_NO_CARD "No SD card" #define MSG_DWELL "Sleep..." #define MSG_USERWAIT "Wait for user..." #define MSG_RESUMING "Resuming print" #define MSG_PRINT_ABORTED "Print aborted" #define MSG_NO_MOVE "No move." #define MSG_KILLED "KILLED. " #define MSG_STOPPED "STOPPED. " #define MSG_CONTROL_RETRACT "Retract mm" #define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm" #define MSG_CONTROL_RETRACTF "Retract V" #define MSG_CONTROL_RETRACT_ZLIFT "Hop mm" #define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm" #define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm" #define MSG_CONTROL_RETRACT_RECOVERF "UnRet V" #define MSG_AUTORETRACT "AutoRetr." #define MSG_FILAMENTCHANGE "Change filament" #define MSG_INIT_SDCARD "Init. SD card" #define MSG_CNG_SDCARD "Change SD card" #define MSG_ZPROBE_OUT "Z probe out. bed" #define MSG_POSITION_UNKNOWN "Home X/Y before Z" #define MSG_ZPROBE_ZOFFSET "Z Offset" #define MSG_BABYSTEP_X "Babystep X" #define MSG_BABYSTEP_Y "Babystep Y" #define MSG_BABYSTEP_Z "Live adjust Z" #define MSG_ENDSTOP_ABORT "Endstop abort" #define MSG_ADJUSTZ "Auto adjust Z ?" #define MSG_PICK_Z "Pick print" #define MSG_SETTINGS "Settings" #define MSG_PREHEAT "Preheat" #define MSG_UNLOAD_FILAMENT "Unload filament" #define MSG_LOAD_FILAMENT "Load filament" #define MSG_RECTRACT "Rectract" #define MSG_ERROR "ERROR:" #define MSG_PREHEAT_NOZZLE "Preheat the nozzle!" #define MSG_SUPPORT "Support" #define MSG_CORRECTLY "Changed correctly?" #define MSG_YES "Yes" #define MSG_NO "No" #define MSG_NOT_LOADED "Filament not loaded" #define MSG_NOT_COLOR "Color not clear" #define MSG_LOADING_FILAMENT "Loading filament" #define MSG_PLEASE_WAIT "Please wait" #define MSG_LOADING_COLOR "Loading color" #define MSG_CHANGE_SUCCESS "Change success!" #define MSG_PRESS "And press the knob" #define MSG_INSERT_FILAMENT "Insert filament" #define MSG_CHANGING_FILAMENT "Changing filament!" #define MSG_SILENT_MODE_ON "Mode [silent]" #define MSG_SILENT_MODE_OFF "Mode [high power]" #define MSG_REBOOT "Reboot the printer" #define MSG_TAKE_EFFECT " for take effect" #define MSG_Enqueing "enqueing \"" #define MSG_POWERUP "PowerUp" #define MSG_EXTERNAL_RESET " External Reset" #define MSG_BROWNOUT_RESET " Brown out Reset" #define MSG_WATCHDOG_RESET " Watchdog Reset" #define MSG_SOFTWARE_RESET " Software Reset" #define MSG_AUTHOR " | Author: " #define MSG_CONFIGURATION_VER " Last Updated: " #define MSG_FREE_MEMORY " Free Memory: " #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: " #define MSG_OK "ok" #define MSG_FILE_SAVED "Done saving file." #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line: " #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line: " #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line: " #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line: " #define MSG_FILE_PRINTED "Done printing file" #define MSG_BEGIN_FILE_LIST "Begin file list" #define MSG_END_FILE_LIST "End file list" #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder " #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder " #define MSG_M200_INVALID_EXTRUDER "M200 Invalid extruder " #define MSG_M218_INVALID_EXTRUDER "M218 Invalid extruder " #define MSG_M221_INVALID_EXTRUDER "M221 Invalid extruder " #define MSG_ERR_NO_THERMISTORS "No thermistors - no temperature" #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder " #define MSG_HEATING "Heating" #define MSG_HEATING_COMPLETE "Heating done." #define MSG_BED_HEATING "Bed Heating" #define MSG_BED_DONE "Bed done" #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1.0.2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:" FIRMWARE_URL " PROTOCOL_VERSION:" PROTOCOL_VERSION " MACHINE_TYPE:" CUSTOM_MENDEL_NAME " EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " UUID:" MACHINE_UUID "\n" #define MSG_COUNT_X " Count X: " #define MSG_ERR_KILLED "Printer halted. kill() called!" #define MSG_ERR_STOPPED "Printer stopped due to errors. Fix the error and use M999 to restart. (Temperature is reset. Set it after restarting)" #define MSG_RESEND "Resend: " #define MSG_UNKNOWN_COMMAND "Unknown command: \"" #define MSG_ACTIVE_EXTRUDER "Active Extruder: " #define MSG_INVALID_EXTRUDER "Invalid extruder" #define MSG_X_MIN "x_min: " #define MSG_X_MAX "x_max: " #define MSG_Y_MIN "y_min: " #define MSG_Y_MAX "y_max: " #define MSG_Z_MIN "z_min: " #define MSG_Z_MAX "z_max: " #define MSG_M119_REPORT "Reporting endstop status" #define MSG_ENDSTOP_HIT "TRIGGERED" #define MSG_ENDSTOP_OPEN "open" #define MSG_HOTEND_OFFSET "Hotend offsets:" #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir" #define MSG_SD_INIT_FAIL "SD init fail" #define MSG_SD_VOL_INIT_FAIL "volume.init failed" #define MSG_SD_OPENROOT_FAIL "openRoot failed" #define MSG_SD_CARD_OK "SD card ok" #define MSG_SD_WORKDIR_FAIL "workDir open failed" #define MSG_SD_OPEN_FILE_FAIL "open failed, File: " #define MSG_SD_FILE_OPENED "File opened: " #define MSG_SD_SIZE " Size: " #define MSG_SD_FILE_SELECTED "File selected" #define MSG_SD_WRITE_TO_FILE "Writing to file: " #define MSG_SD_PRINTING_BYTE "SD printing byte " #define MSG_SD_NOT_PRINTING "Not SD printing" #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file" #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir: " #define MSG_STEPPER_TOO_HIGH "Steprate too high: " #define MSG_ENDSTOPS_HIT "endstops hit: " #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented" #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented" #define MSG_BABYSTEPPING_X "Babystepping X" #define MSG_BABYSTEPPING_Y "Babystepping Y" #define MSG_BABYSTEPPING_Z "Adjusting Z" #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Error in menu structure" #define MSG_LANGUAGE_NAME "English" #define MSG_LANGUAGE_SELECT "Select language " #define MSG_PRUSA3D "prusa3d.com" #define MSG_PRUSA3D_FORUM "forum.prusa3d.com" #define MSG_PRUSA3D_HOWTO "howto.prusa3d.com" #define MSG_SELFTEST_ERROR "Selftest error !" #define MSG_SELFTEST_PLEASECHECK "Please check :" #define MSG_SELFTEST_NOTCONNECTED "Not connected" #define MSG_SELFTEST_HEATERTHERMISTOR "Heater/Thermistor" #define MSG_SELFTEST_BEDHEATER "Bed / Heater" #define MSG_SELFTEST_WIRINGERROR "Wiring error" #define MSG_SELFTEST_ENDSTOPS "Endstops" #define MSG_SELFTEST_MOTOR "Motor" #define MSG_SELFTEST_ENDSTOP "Endstop" #define MSG_SELFTEST_ENDSTOP_NOTHIT "Endstop not hit" #define MSG_SELFTEST_OK "Self test OK" #define MSG_STATS_TOTALFILAMENT "Total filament :" #define MSG_STATS_TOTALPRINTTIME "Total print time :" #define MSG_STATS_FILAMENTUSED "Filament used: " #define MSG_STATS_PRINTTIME "Print time: " #define MSG_SELFTEST_START "Self test start " #define MSG_SELFTEST_CHECK_ENDSTOPS "Checking endstops" #define MSG_SELFTEST_CHECK_HOTEND "Checking hotend " #define MSG_SELFTEST_CHECK_X "Checking X axis " #define MSG_SELFTEST_CHECK_Y "Checking Y axis " #define MSG_SELFTEST_CHECK_Z "Checking Z axis " #define MSG_SELFTEST_CHECK_BED "Checking bed " #define MSG_SELFTEST_CHECK_ALLCORRECT "All correct " #define MSG_SELFTEST "Selftest " #define MSG_SELFTEST_FAILED "Selftest failed " #define MSG_STATISTICS "Statistics " #define MSG_USB_PRINTING "USB printing " #define MSG_HOMEYZ "Calibrate Z" #define MSG_HOMEYZ_PROGRESS "Calibrating Z" #define MSG_HOMEYZ_DONE "Calibration done" #define MSG_SHOW_END_STOPS "Show end stops" #define MSG_CALIBRATE_BED "Calibrate X/Y" #define MSG_CALIBRATE_BED_RESET "Reset X/Y calibr." #define MSG_MOVE_CARRIAGE_TO_THE_TOP "Calibrating X/Y. Move Z carriage up to the end stoppers. Click when done." #define MSG_CONFIRM_NOZZLE_CLEAN "Please clean the nozzle for calibration. Click when done." #define MSG_CONFIRM_CARRIAGE_AT_THE_TOP "Are left and right Z~carriages all up?" #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 "Searching bed" #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE2 "calibration point" #define MSG_FIND_BED_OFFSET_AND_SKEW_LINE3 " of 4" #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 "Improving bed" #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE2 "calibration point" #define MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE3 " of 9" #define MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND "X/Y calibration failed. Bed calibration point was not found." #define MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED "X/Y calibration failed. Please consult the manual." #define MSG_BED_SKEW_OFFSET_DETECTION_PERFECT "X/Y calibration ok. X/Y axes are perpendicular." #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD "X/Y calibration all right. X/Y axes are slightly skewed." #define MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME "X/Y skewed severly. Skew will be corrected automatically." #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR "X/Y calibration failed. Left front calibration point not reachable." #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR "X/Y calibration failed. Right front calibration point not reachable." #define MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR "X/Y calibration failed. Front calibration points not reachable." #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR "X/Y calibration compromised. Left front calibration point not reachable." #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR "X/Y calibration compromised. Right front calibration point not reachable." #define MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR "X/Y calibration compromised. Front calibration points not reachable." #define MSG_BED_LEVELING_FAILED_POINT_LOW "Bed leveling failed. Sensor didnt trigger. Debris on nozzle? Waiting for reset." #define MSG_BED_LEVELING_FAILED_POINT_HIGH "Bed leveling failed. Sensor triggered too high. Waiting for reset." #endif // LANGUAGE_EN_H